PRODUCT SPECIFICATION
Contents
1. Ion ICR18650 HA1 1300mAh BCY PS HA1 Rev6 2010 05 07 6 Contents SONNE UE oh EN 1 General Information EEN 1 1 Scope 1 2 Application 1 3 Product Classification 1 4 Model Name 2 Nominal Specification AAA 2 1 Capacity 2 2 Nominal Voltage 2 3 1 Standard Charge 2 3 2 Fast Charge 2 4 Max Charge Voltage 2 5 Max Charge Current 2 6 1 Standard Discharge 2 6 2 Fast Discharge 2 7 Weight 2 8 Operating Temperature 2 9 Storage Temperature for shipping state 3 Appearance and Dimension EEN 5 3 1 Appearance 3 2 Dimension 4 Performance Specification E 4 1 Standard Test Condition 4 2 Electrical Specification 4 3 Environmental Specification 4 4 Mechanical Specification 4 5 Safety Specification 5 Cautions and Prohibitions in Handling AANEREN 8 3 9 PRODUCT SPECIFICATION CONFIDENTIAL Document No Date Rev BCY PS HA1 Rev6 2010 05 07 6 7 Ga Chem Lithium Ion ICR18650 HA1 1300mAh 1 General Information 1 1 Scope This product specification defines the requirements of the rechargeable lithium ion battery to be supplied to the Customer by LG Chem 1 2 Application Power Tools 1 3 Product classification Cylindrical rechargeable lithium ion battery 1 4 Model name ICR18650HA1 2 Nominal Specification Item Condition Note Specification 2 1 Capacity Std charge discharge Nominal 1300 mAh Cnom Minimum 1200 mAh Cmin 2 2 Nominal Voltage Average for Std discharge 3 68 V 2 32. for charging Do not charge with constant current more than maximum charge current Do not disassemble or reconstruct the battery Do not throw or cause impact e Do not pierce a hole in the battery with sharp things such as nail knife pencil drill Do not use with other batteries or cells Do not solder on battery directly Do not press the battery with overload in manufacturing process especially ultrasonic welding e Do not use old and new cells together for packing Do not expose the battery to high heat such as fire e Do not put the battery into a microwave or high pressure container Do not use the battery reversed e Do not connect positive and negative with conductive materials such as metal wire Do not allow the battery to be immerged in or wetted with water or sea water 9 9
3. 1 Standard Charge Constant current 650 mA Refer to 4 1 1 Constant voltage 4 2V End condition Cut off 50 mA 2 3 2 Fast charge Constant current 4000 mA Refer to 4 1 3 Constant voltage 4 2V End condition Cut off 100 mA 2 4 Max Charge Voltage 4 2V 2 5 Max Charge Current 4000 mA 2 6 1 Standard Discharge Constant current 260 mA Refer to 4 1 2 End voltage Cut off 2 5V 2 6 2 Fast Discharge Constant current 10000 mA Refer to 4 1 3 End voltage Cut off 2 5V 2 7 Max Discharge Current For continuous charge 15000 mA 2 8 Weight Max 46 0g 2 9 Operating Temperature Charge 0 45 Discharge 20 60 2 10 Storage Temperature 1 month 20 60 for shipping state 3 month 20 45 1 year 20 20 4 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HA1 1300mAh BCY PS HA1 Rev6 2010 05 07 6 3 Appearance and Dimension 3 1 Appearance There shall be no such defects as deep scratch crack rust discoloration or leakage which may adversely affect the commercial value of the cell 3 2 Dimension Diameter 18 3 0 1 0 3 mm Max 18 4 mm Diameter is defined as the largest data value measured on the A area of a cylindrical cell Height 65 0 0 2mm Max 65 2 mm gt A Max 18 4 mm 4 Performance Specification 4 1 Standard test condition 4 1 1 Standard Charge Unless otherwise specified Standard Charge shall consist of charging at
4. PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev BCY PS HA1 Rev6 2010 05 07 6 Lithium lon ICR18650HA1 1300mAh PRODUCT SPECIFICATION Rechargeable Lithium lon Battery Model ICR18650HA1 1300mAh For BMZ LG Chem 20 YOIDO DONG YOUNGDUNGPO GU SEOUL 150 721 KOREA TEL 82 2 3773 1114 FAX 82 2 3773 7005 http www Igchem com PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HA1 1300mAh BCY PS HA1 Rev6 2010 05 07 6 Revision History Revision Date Originator Description 0 2006 12 27 Kim Bong Tae Original Release 1 2007 03 30 Kim Hong Jeong Change of nominal capacity 1400 gt 1300 mAh Separation of nominal capacity Capacity 2 2007 10 05 Kim Hong Jeong for Standard and Fast charge discharge Cell dimension information was specified 3 2009 01 30 Kim Sung Jong Standard of cell diameter cell head Cell printing was changed 4 2009 07 15 Kim Sung Jong Max charge voltage was added Change of Max Discharge Current 5 2010 01 28 Choi Yeong Gwang 18A 20A Definitions of standard charge discharge and fast charge discharge were corrected 6 2010 05 07 Choi Yeong Gwang Measurement of recovery capacity was corrected 2 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium
5. arge condition and Overcharge Test constant voltage of 4 2V while tapering the charge current Charging is continued for 7 hours Per UL1642 No explode No fire 4 5 2 Cells are charged per 4 1 1 and the positive and External Short negative terminal is connected by a 100m amp wire for 1 No explode No fire Circuiting Test hour Per UL1642 4 5 3 Cells are discharged at constant current of 0 2C to Overdischarge n f No explode No fire pace 250 of the minimum capacity es 7 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HA1 1300mAh BCY PS HA1 Rev6 2010 05 07 6 Cells are charged per 4 1 1 and heated in a circulating 4 5 4 air oven at a rate of 5 C per minute to 130 C At 130 C No explode No fire Heating Test oven is to remain for 10 minutes before test is discontinued Per UL 1642 Cells charged per 4 1 1 are impacted with their 4 5 5 longitudinal axis parallel to the flat surface and f m No explode No fire Impact Test perpendicular to the longitudinal axis of the 15 8mm diameter bar Per UL1642 isy Cells charged per 4 1 1 are crushed with their longitudinal axis parallel to the flat surface of the No explode No fire Crush Test crushing apparatus Per UL1642 5 Caution and Prohibition in Handling Warning for using the lithium ion rechargeable battery Mishandling of the battery ma
6. constant current of 650 mA The cell shall then be charged at constant voltage of 4 2 V while tapering the charge current Charging shall be terminated when the charging current has tapered to 50 mA For test purposes charging shall be performed at 23 2 C 4 1 2 Standard Discharge Standard Discharge shall consist of discharging at a constant current of 260 mA to 2 5 V Discharging is to be performed at 23 2 C unless otherwise noted such as capacity versus temperature 4 1 3 Fast Charge discharge condition Cells shall be charged at constant current of 4000 mA to 4 2 V with end current of 100 mA Cells shall be discharged at constant current of 10000 mA to 2 5 V Cells are to rest 10 minutes after charge and 20 minutes after discharge 5 9 LG Chem Lithium Ion ICR18650 HAT 1300mAh Description 4 2 Electrical Specification CONFIDENTIAL Document No BCY PS HA1 Rev6 PRODUCT SPECIFICATION Date 2010 05 07 6 Item Condition Specification 4 2 1 Cell shall be measured at 1kHz after charge per lt 30 mQ without PTC Initial AC Impedance 4 1 1 4 2 2 Cells shall be charged per 4 1 1 and discharged Ci 2 1200 mAh Cmin Initial Capacity Cini per 4 1 2 within 1h after full charge 4 2 3 Cells shall be charged and discharged per 2 60 of Chin in 2 1 Cycle Life 4 1 3 400 cycles A cycle is defined as one charge and one discharge 401st discharge capacity shall be measured
7. covery Capacity After storage cells shall be discharged with standard discharge condition 4 1 2 and then cells shall be charged with standard charge condition 4 1 1 and then discharged with standard discharge condition 4 1 2 This charge discharge cycle shall be repeated three times to measure the recovery capacity 6 9 LG Chem Lithium Ion ICR18650 HAT 1300mAh Description CONFIDENTIAL Document No BCY PS HA1 Rev6 PRODUCT SPECIFICATION Date 2010 05 07 6 4 3 5 Cells shall be charged per 4 1 1 at 23 C 2 C Temperature and discharged per 4 1 2 at the following Dependency of temperatures Capacity Charge Discharge Capacity 10 60 of Cini aes OT 80 of Ci 23 C 100 of Cini 60 95 of Cini 4 4 Mechanical Specification Item Condition Specification 4 4 1 Cells charged per 4 1 1 are dropped onto an oak board No leakage Drop Test from 1 meter height for 1 cycle 2 drops from each cell No temperature rising terminal and 1 drop from side of cell Total number of drops 3 4 4 2 Cells charged per 4 1 1 are vibrated for 90 minutes per No leakage Vibration Test each of the three mutually perpendicular axes x y Z with total excursion of 0 8mm frequency of 10Hz to 55Hz and sweep of 1Hz change per minute 4 5 Safety Specification Item Condition Specification Cells are discharged per 4 1 2 then charged at constant 4 5 1 current of 3 times the max ch
8. per 4 1 1 and 4 1 2 4 3 Environmental specification Item Condition Specification 4 3 1 Storage Characteristics Cells shall be charged per 4 1 1 and stored in a temperature controlled environment at 23 C 29C for 30 days After storage cells shall be discharged per 4 1 2 to obtain the remaining capacity Capacity remaining rate 90 of Cini 4 3 2 High Temperature Cells shall be charged per 4 1 1 and stored in a temperature controlled environment at 60 C for No leakage IV Capacity recovery rate High Temperature and High Humidity Test 95 RH for 168 hours After test cells are discharged per 4 1 2 and cycled per 4 1 1 and 4 1 2 for 3 cycles to obtain recovered capacity Storage Test 1 week After storage cells shall be discharged 80 of Cini per 4 1 2 and cycled per 4 1 1 and 4 1 2 for 3 cycles to obtain recovered capacity 4 3 3 Cells are charged per 4 1 1 and stored at 60 C No leakage No rust Capacity recovery rate 80 of Cini 4 3 4 Thermal Shock Test 65 C 8h 3hrs 20 C 8h for 8 cycles with cells charged per 4 1 1 After test cells are discharged per 4 1 2 and cycled per 4 1 1 and 4 1 2 for 3 cycles to obtain recovered capacity No leakage Capacity recovery rate gt 80 of Cini Remaining Capacity After storage cells shall be discharged with standard condition 4 1 2 to measure the remaining capacity Re
9. y cause heat fire and deterioration in performance Be sure to observe the following Caution e When using the application equipped with the battery refer to the user s manual before usage e Please read the specific charger manual before charging e Charge time should not be longer than specified in the manual e When the cell is not charged after long exposure to the charger discontinue charging e Battery must be charged at operating temperature range 0 45 C e Battery must be discharged at operating temperature range 20 60 C e Please check the positive and negative direction before packing e When a lead plate or wire is connected to the cell for packing check out insulation not to short circuit e Battery must be stored separately e Battery must be stored in a dry area with low temperature for long term storage Do not place the battery in direct sunlight or heat Do not use the battery in high static energy environment where the protection device can be damaged e When rust or smell is detected on first use please return the product to the seller immediately e The battery must be away from children or pets e When cell life span shortens after long usage please exchange to new cells 8 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HA1 1300mAh BCY PS HA1 Rev6 2010 05 07 6 Prohibitions e Do not use different charger Do not use cigarette jacks in cars
Download Pdf Manuals
Related Search