dvd/vcd/cd/mp3/mpeg4/xvid car radio with 7” screen usb
Contents
1. ISO Wire connector X1 Removable control panel X1 User manual X1 USB cable X1 screws X 4 Already mounted on the unit GB 2 PRECAUTION This unit is designed and manufactured with the user s safety in mind however any improper use or operation may result in certain dangers It is therefore highly recommended to read this manual thoroughly and adhere to the following precautions SAFETY PRECAUTIONS X XL XX Y gt To prevent an electrical shock do not open the housing of the unit In any case of malfunctioning only have the unit serviced by an approved and qualified service centre Do not expose to any water or to a very humid environment Do not operate the unit when your hands are wet as this may cause a short circuit For safe driving keep the volume low in order to concentrate on traffic conditions Do not clean the unit with alcohol only clean with a soft dry cloth If the unit has been kept at a high temperature or in a high humidity environment cool down the car interior before turning on the unit Do not use the unit for a long time without running the vehicle engine as this may drain the battery and the vehicle s engine may not be able to start Before final installation in the dashboard opening connect the wiring and make sure the unit is working properly Only use parts provided with the unit to ensure proper installation Do no2. SINGLE ELAPSED SINGLE REMAIN DISPLAY OFF Quick track selection During playback first press I 4 button to return to the beginning of the current track Press this button again to play the previous track Press the el button to play the next Skip backward forward F F F REW playback Press the or MP button on the remote control to perform fast rewind or fast forward 2xX 4 X 8X 16 Xx 32 X P GB 29 DVD VCD CD MP3 MPEG4 XVID OPERATION DVD 1 Playing a DVD Insert a DVD into the slot The unit will automatically switch on If a disc is already loaded press the MODE button on the remote control to switch to DVD mode 2 Quick chapter selection During playback first press F44 button to return to the beginning of the current chapter Press this button again to play the previous chapter Press the button to play the next chapter 3 Stop play During DVD playback first press the m button to stop playback Press the FI button to resume play Press the Pll button twice to stop playback completely Note This function can only be operated by using the remote control 4 Pause playback During DVD playback press the PLAY button to switch between play and pause 5 Skip backward forward F F F REW playback Press the or button on the remote control to perform fast rewind or fast forward 2X AX SB 16 X 32 X P 6 Repeat play During DVD playback hold down the RPT button on the remot
3. In DVD USB CARD mode press these buttons to select the previous or next file Hold down the button for 2 seconds to fast forward or fast rewind 9 Disc Loading Slot 10 BAND PIl In radio mode press this button repeatedly to select the one of the following frequency bands FM1 FM2 FM3 MW1 MW2 In play mode press this button to pause or resume playback 11 MODE button Press this button to select one of the following sources RADIO DVD SD USB AV1 AV2 GB 10 12 AV IN audio video in Connect the jack on the AV cable supplied to the AV IN input on the detachable front panel of the unit You can then connect an external audio video device to this adaptor using a suitable A V cable if necessary then press the MODE button to switch to AV1 mode BASIC OPERATION 13 SD MMC card slot Insert an SD MMC card The unit will read the files from the SD MMC card automatically NOTE If the unit does not eject the SD MMC card when it is pressed just pull it out manually 14 AF DISP button alternative frequencies information display In radio mode press this button to turn the alternative frequencies function on off Hold down this button to display the following information the current time source selected for the main display source selected for the front and rear displays and available media 15 OPEN Press to open or close the TFT screen 16 A Press the button to eject a disc when it is loaded into the unit X Press this button for a lo
4. LOC subtitles local stations 18 MENU 19 pll play pause 20 IID PTY slow program type 21 ST AUDIO stereo audio 22 ZOOM AF zoom alternative frequencies 23 LOUD loudness 24 RDM TA random traffic announcement 25 RPT CLEAR 26 GOTO Installing the battery Slide the tray out on the back of the remote control and insert the battery with polarity on top as shown P pai Es i od er dt dl AS ES Use and care of the remote control Point the remote control to the IR window on the detachable front panel for operation Notes GB 12 Using the battery incorrectly can cause malfunctions Take Use one CR2025 3V lithium battery note of the following points for the remote control Remove the battery if the remote control is not to be Keep the battery out of the reach of children Should the used for a month or longer battery be swallowed immediately consult a doctor REMOTE CONTROL OPERATION Te 8 9 POWER Press to turn the unit on or off MODE Press this button to select one of the following sources RADIO DVD SD USB AV1 AV2 BAND P N In radio mode press this button to select a frequency band In DVD VCD mode press it to select one of the following TV systems PAL AUTO or NTSC AMS ANGLE In radio mode press this button briefly to scan through the preset stations Press it for a longer time to automatically store stations In DVD mode press it to change the vie
5. MW2 5 LOC local stations Select local or distant stations 6 EQ Select a preset equalizer mode POP CLASSIC ROCK OFF 7 LOUD Turn the loudness function on off 8 Paget Go to the RDS menu Refer to RDS for detail 9 SEEK SEEK seek a station automatically Hold down to seek a station manually 10 AMS Touch briefly to scan through the preset stations Hold down this icon to seek and store stations automatically RDS Berg 1 TA traffic annou ncement EON OFF REG OFF FM2 MONO Turn the Traffic PTY NONE mee Announcement function on off RE PTY CULTURE 2 AF frequencies Turn the AF function on off L 3 PTY program type 3 This icon allows you to turn the PTY function on Press this icon repeatedly to select a program type 4 Page 2 This icon allows you to display the RADIO menu Refer to the RADIO section for more details 5 SEEK SEEK These icons allow you to seek a station automatically Hold down to seek a station manually EON Enhanced Other Networks ON The unit keeps searching for alternative frequencies If the current station does not broadcast traffic information alternative el el TA AF PTY Seek Sook Page GB 17 the unit will automatically receive a station that broadcasts traffic information when it is available OFF Select this option to disable the EON function TOUCH SCREEN CONTROLS Playback In DVD USB SD MMC mode press the lower part of th
6. REW playback Press the or button on the remote control to perform fast rewind or fast forward 2x 4x 8x 16x 32 x e GB 26 DVD VCD CD MP3 MPEG4 XVID OPERATION 9 System switch In VCD playback press the P N button on the remote control to set the TV system to PAL AUTO or NTSC Note This function can only be operated by using the remote control 10 Slow motion playback In VCD mode press the I gt button to play slow forward The following speeds are available e 4 2 14 1 8 1 16 E Note This function can only be operated by using the remote control 11 Increase or decrease the size of the picture Press the ZOOM button to increase or decrease the picture size Press the button repeatedly to change the zoom size Note This function can only be operated by using the remote control 12 On screen display In VCD CD mode press the DISP button on the remote control and the display shows SINGLE ELAPSED SINGLE REMAIN TOTAL ELAPSED TOTAL REMAIN DISPLAY OFF 13 Selecting an audio mode In VCD CD mode press the AUDIO button on the remote control repeatedly to select an audio mode in the following order MONO LEFT MONO RIGHT MIX MONO STEREO GB 27 DVD VCD CD MP3 MPEG4 XVID OPERATION 14 Programmed playback In VCD CD mode press the PROG button and the program menu will be displayed Press the number buttons to select the track number Use the direction buttons to move
7. TUNER Frequency range Ee nae 922 1620 kHz Usable sensitivity 2 nnn nnn nnn nn nnn nnn nnn nnn nn nnn nnn nnn nnn nnn nnn 30dB Signal to noise ratio nnn nnn nnn nnn nnn nnn nnn nnn nnn nn nnn nn nnn nnn nnn nnn nnn nnn nnn nnn 50dB GB 40 TROUBLESHOOTING Symptom Power isn t switched ON Leads and connectors are incorrectly connected Ensure that all connections are correct The unit doesn t operate The power cable fuse s has have blown Replace the old fuse s with a new The vehicle fuse corresponding to the place where one s with the same capacity try to the car radio is has blown determine the cause of the problem Outside factors are causing the unit to operate Reset the unit by pressing RESET with incorrectly the tip of a pen Operation with the remote control Battery power is low Load new batteries isn t possible Some operations are prohibited with certain discs Check using another disc Playback is not possible The disc is dirty Clean the disc The loaded disc is a type this unit cannot play Check the disc type with the Technical Specifications Non compatible video system disc is loaded Change to a disc compatible to your video system There is no sound The spea
8. nnn nnn nnn nnn Composite video SCREEN Size type 7 16 9 Resolution gt 480 3 RGB x 234 Brightness cd M 300cd m ContraSt EE ee 250 1 View angle Voice 150 View angle H nnn 160 GB 39 TECHNICAL SPECIFICATIONS DVD PLAYER AANTEEL n nnn nnn nnn nn nnn nn nnn nnn nnn nnn nnn nnn nnn nnn nnn nnn nnn nnn more than 70 dB 1kHz Dynamic ranQ nnn nnn nnn nnn nnn nn nnn nn nnn EE nnn more than 80 dB 1 kHz Distortion EE 29 2 2 nnn nnn nein nnn nn nnn nnn nnn nn nnn nnn nnn nnn nn nena nnn less than 0 2 Video output nnn nnn nnn nn nnn nnn nnn nn nn nnn nnn nnn 1 0 Vp p 0 2V 75 Q Audio output RCA 1 5 Vrms 0 3V 10K Q Discs played DVD Video D
9. the cursor to START and press ENTER to start programmed playback Move the cursor to EXIT and press ENTER to exit the programmed playback Move the cursor to Ma4 and press ENTER to go to the last page move the cursor to PPland press ENTER to go to the next page During this process press STOP to cancel the programmed playback Note This function can only be operated by using the remote control MPEG4 XVID 1 Playing an MPEG4 XVID file Disc SD MMC Card USB disk operation refer to previous section MP3 2 Number buttons You can select any track directly by using the number buttons The track will play automatically Note This function can only be operated by using the remote control GB 28 DVD VCD CDMP3 MPEG4 XVID OPERATION 3 Stop play During MPEG4 AVI MPEG4 playback first press the STOP button to stop playback Press the PLAY button to resume play Press the STOP button twice to stop playback completely Note This function can only be operated by using the remote control 4 Pause playback During MPEG4 AVI MPEG4 playback press the PLAY button on the remote control or the Mil button on the main unit to switch between play and pause Repeat playing When playing MPEG4 files AVI MPEG hold down the RPT button on the remote control to repeat the current track Press it again to repeat all default mode On screen display Press the DISP button on the remote control and the display shows
10. SB card mode or the current radio station when traffic information is broadcast Press the TA button briefly to switch TA mode on or off When TA mode is switched on the unit automatically broadcasts the traffic information available To interrupt the broadcast of traffic information without switching off the TA function briefly press the TA button The unit will then return to the previous mode Using PTY to Select a Program The PTY function allows you to search for stations with a particular program type You can select the type by pressing the PTY button on the main unit or the remote control Refer to the type for your selection as listed in table below NEWS POP SOCIAL FOLK M DRAMA OTHERM JAZZ ooo CULTURE WEATHER COUNTRY science FINANCE NATONM varied CHILDREN omes When PTY is selected the radio starts to search corresponding PTY information and stops if the corresponding PTY information is found If corresponding PTY information is not found normal radio reception is resumed GB 23 DVD VCD CD MP3 MPEG4 XVID OPERATION MP3 1 Playing a disc an SD MMC card or a USB device containing MP3 files Connect a USB device using the supplied USB cable insert a disc into the disc slot or an SD MMC card into the card slot The unit will automatically switch on when a disc card or USB device is inserted Press MODE button to select the source DISC USB SD lf a media containing MP3 or WMA files is ins
11. SCOTT DRX 9 SU DVD VCD CD MP3 MPEG4 XVID CAR RADIO WITH 7 SCREEN USB SD MMC INTERFACE ESP ANTI SHOCK SYSTEM AM FM RDS TA AF PTY 160 WATT POWER DETACHABLE PANEL t an ee iy SS O se AAA ETE mm MEN Tee Toe Ts A USER MANUAL AND INSTALLATION INSTRUCTIONS CONTENTS CONTENTS eryri RE EE EE EE EE A AUGES SORIES sarria N RE Re ede ia IRE EE Re ee ie OE N tune PRECAUTION sis Ee ED AR De Ee n DE EG ee ke E INSTALLATION REMOVAL AND ELECTRICAL CONNECTIONS DUAL ZONE MODE SETUP AI A NS GE EE N Si ESOS IE MA EE EE O E OE RE EO EE EN BA IE OEFERATION mi susse recia ie REMOTE CONTROL sessies se eed We eie gr eo ae see DR R TOUCH SEREENGONTERO Si este Es EDE Se EG OE SE GE Ee GE er Ge n a or RADIO OPERATION onse Se EG ee oe Ge ee Ge Ge N iia DVD VCD CD MP3 MPEG4 XVID OPERATION oo ce ese ee ese ee ese ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ae ee ee ed DUE ETUR ae et ee errr Tere N AD E O E Do aaO TECHNICAL SPEEN EATIONS idee EG ae RE Ve ede aia ita TEE LUBLE SOOS TINE sad eis SE N eN IE SE RE N Ge eta Sar Ee Ag Ee Re teas GB 1 ACCESSORIES sa Mounting Small metal Washer x 1 Bracket x1 Removable Trim Ring sp 3 i Nut x 1 already mounted X1 already mounted on on the unit the unit S E gt lt Dd saug Na ERD Rubber X1 Remote Control X1 Release key X2 AV in Cable x1 DAK P20 ESCOTT
12. TEREO L MONO R MONO and MIX MONO 2 2 2 DYNAMIC Select FULL to limit the volume variations as much as possible Select OFF to switch off the dynamic compression function 3 PREFERENCE SETUP PAGE The preference setting is active only when no disc is inserted or play is stopped completely The settings take effect the next time the unit is switched on 3 1 AUDIO sets the preferred audio language as the default when playing DVD If available in DVD disc FRENCH DISC MENU SPANISH CHINESE PARENTAL JAPANESE DEFAULT KOREAN RUSSIAN THAI PREFERRED AUDIO LANGUAGE 3 2 SUBTITLE sets the preferred subtitle language as the default when playing DVD if available in DVD disc AUDIO NG ENGLISH SUBTITLE ENG FRENCH DISC MENU SPANISH PARENTAL SENESE BE JAPANESE DEFAULT KOREAN RUSSIAN THAI PREFERRED SUBTITLE LANGUAGE GB 36 DVD SETUP 3 3 DISC MENU sets the preferred menu language as the default when playing DVD if available in DVD disc ENG ENGLISH ENG FRENCH ENG SPANISH CHINESE DEFAULT JAPANESE KOREAN RUSSIAN THAI PREFERRED MENU LANGUAGE 3 4 PARENTAL The parental control function works in conjunction with the different censorship classes assigned to DVDs These classes help to control the types of DVDs that the family watches There are up to 8 censorship classes for DVDs Note e The PARENTAL control can be changed when PASSWORD MODE is set to OFF operation re
13. VD R RW DVD R RW MPEG4 XVID CD DA CD R RW MP3 JPEG VCD 2 0 Region code nn EE USB SD card USB port type EE nnn 1 1 USB port maximum Capacity 2GB CARD type ono SD MMC CARD maximum Capacity n 92 2 o oo nnn nnn nnn nnn nnn nnn nnn nn nnn nn nn nnn nnn nnn nnn nnn nnn nnn nae 1GB Maximum number of MP3 folders sub folders supported 999 files 16 sub folders FM TUNER Frequency range 87 9 108 0MHz Usable sensitivity 10 dB ANNE EE n onan nnn nnn nn nn nnn nn nn nnn nn nnn nnn nn nnn nnn nn nn nnn nnn nnn nnn nnn nnn nnn 55 dB mono Distortion n nnn nnn nnn nnn nnn nn nn nnn nn nn nnn nn nn nnn nn nn nnn nn nn nnn nnn nnn nnn 0 5 mono Stereo separation 30 dB 65 dBu 1kHz MW
14. annot be held responsbile if the unit malfunctions due to incorrect connections For safety reasons the brown wire must be connected to the parking brake contact in order to activate the video display on the units screen The video display is activated permanently on the rear monitor It is possible to connect a reversing camera composite video to the input provided for this purpose In order to activate the reversing camera display please also ensure that the orange cable is connected to the reversing contact or reversing light so that the unit automatically enters reversing camera mode when the reverse gear is engaged DUAL ZONE mode setup This unit is equipped with a DUAL ZONE mode which allows the user when one or two rear monitor s are is connected to simultaneously obtain DVD USB SD or AUX mode on the rear monitor and radio mode on the unit In this case the DUAL AUDIO OUT output must be used to obtain the sound for the DVD the USB device the SD card or auxiliary source on the rear monitor Main source and source selected to display on the rear monitor s refer to the SYSTEM SETUP section In any source menu press the icon located at the top left of the screen to display the system setup menu Next press the source directly to select the front or rear zone 1 When the unit is in radio mode you can select any source for the rear monitor 2 When the unit is in a mode other than radio mode the rear monitors will di
15. e TFT screen to display the following menu PLAY PAUSE STOP PREV NEXT SETUP on P SYSTEM SETUP In any source menu press the icon at left top corner to return to the system setup menu If no operation is 1 PLAY Start playback 2 PAUSE Pause playback 3 STOP Stop playback 4 SETUP Display the DVD SETUP menu 5 PREV Skip to previous element REG Regional ON The unit ignores the regional variants of broadcasts OFF The unit receives the regional variants of broadcasts performed in 5 seconds the unit will return to the previous source menu 1 Front front monitor Front Rear Audio Video Sys Press the icon to select the corresponding source RADIO DVD USB SD or AUX Press the icons on the bottom row to select a setting Front Rear Audio Video Sys System or Exit 6 NEXT Skip to next element 2 Rear GB 18 Front Rear Audio Video Sys Exit SYSTEM SETUP If another monitor is connected to the unit for example for passengers sitting at the rear of the vehicle you can select a separate source from the source selected for the main TFT screen except radio and AUX modes 3 Audio Volume 19 a wai pir Front Rear Audio Video Sys Exit This sub menu offers the following options Volume L front R front L rear R rear Subwoofer Bass Middle and Treble can be adjusted Press the 4 v buttons to select a setting and then touch the lt and gt buttons to adju
16. e control to select a repeat mode from q GB 30 DVD VCD CD MP3 MPEG4 XVID OPERATION 7 System switch In DVD playback press the P N button on the remote control to set the TV system to PAL AUTO or NTSC Note This function can only be operated by using the remote control 8 Slow motion playback In DVD mode press the ll button to play forward or backward in slow motion The following speeds are available Ir 1 2 1 1 4 IF B LE 1 16 411 2 411 4 411 8 411 16 Note This function can only be operated by using the remote control 9 Increase or decrease the size of the picture Press the ZOOM button to increase or decrease the picture size Press the button repeatedly to change the zoom size 2x 3 K d X 1 2 1 3 1 4 No Change Note This function can only be operated by using the remote control 10 On screen display In DVD mode press the DISP button on the remote control and the display shows TITLE ELAPSED TITLE REMAIN CHAPTER ELAPSED CHAPTER REMAIN DISPLAY OFF GB 31 DVD VCD CD MP3 MPEG4 XVID OPERATION 11 Changing the viewing angle multi angle With DVDs featuring multi angle scenes shot from multiple angles recordings press the ANGLE button to switch between viewing angles during playback The viewing angle changes in the following order ANGLE1 ANGLE2 ANGLES Note This function is operated by using the remote control This function is only available
17. e of the touch screen GB 6 ELECTRICAL CONNECTIONS Most vehicles are fitted with ISO connectors behind the dashboard which makes it easier to connect your car radio These connections can be found in the dashboard where the car radio will be fitted Use these cables to connect the car radio If your car is not fitted with these ISO connectors we strongly advise you to consult your car dealer or a specialist to obtain the right adaptor Once you have these cables you will need to connect your loudspeakers and the power supply to the ISO connector following the connection instructions below E C gt Ie 11 Black black Plug RADIO ANTENNA INPUT_ 8 Dark gray White Plug AUDIO OUT FRONT LEFT 6 as EET N ETA E 7 sm Gray Yellow Plug VIDEO OUT 10 Bladk Red Plug AUXINRIGHT 8 On Brown Yellow PlugREAR VIEW VIDEO IN Black White Plug 9 Is XTERNAL VIDE 12 Light gray Red Plug AUDIO OUT REAR RIGHT s L Blue Red Plug DUAL AUDIO OUT RIGHT 13 Light gray White Plug AUDIO OUT REAR LEFT 12 a Blue What DUAL AUDIO OUT LEFT 14 BrowBrown Plug SUBWOOFER OUT i3 sl y 14 Lol A1 NO CONNECTION A2 NO CONNECTION B2 REAR RIGHT SPEAKER A3 NO CONNECTION A4 BATTERY BACKUP MEMORY A5 ANTENNA POWER AG LAMP IN Bo FRONT LEFT SPEAKER Af ACC IGNITION B7 REAR LEFT SPEAKER A8 GROUND BS REAR LEFT SPEAKER GB 7 NOTES INCORRECT CONNECTIONS OR USE WILL VOID THE WARRANTY The manufacturer c
18. erted playback will start automatically even if the media contains JPEG files audio files are read first Press m to return to the navigation menu and select other types of files During MP3 playback press the m button then press the 4 gt gt I buttons to select a folder if applicable Then confirm using the ENTER button Then select the next track desired using the buttons Press PII PLAY button to start playback 2 Quick track selection When playing MP3 files press the 4or w button on the remote control to go to the next or previous track 3 Repeat playing When playing MP3 files hold down the RPT button repeatedly on the remote control to select a repeat mode REPEAT ONE and REPEAT ALL default mode In REPEAT ONE mode the unit will play the current track repeatedly In REPEAT ALL mode it will play all the tracks repeatedly 4 Selecting an MP3 track or file using the number buttons Press the number buttons to select a track then press the ENTER button to confirm Note This function can only be operated using the remote control If you make a mistake press CLEAR button to clear GB 24 DVD VCD CD MP3 MPEG4 XVID OPERATION 5 Stop playing When playing MP3 files press the W button to stop playback 6 Pause playback When playing MP3 files press the Fil button on the main unit or on the remote control to switch between PII play and pause 7 Skip backward forward F F F REW playback Press the 4 or FH b
19. ess the X symbol on the screen until the message adjust succeed is displayed GB 20 6 EXIT Press this button to return to the previous source menu RADIO OPERATION Listening to the radio 1 Press the MODE button to select the radio mode 2 Press the BAND button repeatedly to select the radio band in the following sequence FM1 FM2 FM3 MW1 MW2 3 Press the lt gt gt buttons on the unit to tune in a station automatically Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning 1 Press the BAND button to select the desired band 2 Press the buttons on the unit to tune in a station automatically Manual tuning 1 Press the BAND button to select the desired band 2 Hold down the lt lt gt gt button on the unit to tune forwards or backwards manually PAY FN B1505 FM 8155 ARS Ed Fm 81 55 E f i GB 21 RADIO OPERATION Preset tuning Recalling a preset station Up to 30 stations on the 18 in FM and 12 in MW can be stored in the units memory Press 4 or v on the remote control to recall a preset station Auto store Auto store is a function for storing up to 6 stations If 6 stations with good reception cannot be received the previous stored Stations if they exist remain as they are 1 Press the BAND button to select the desired band FM1 FM2 FM3 MW1 MW2 2 Hold down the AMS button for 2 sec
20. fer to next section 4 1 After setting the level of parental control please set the PASSWORD MODE ON to lock the change ENG SUBTITLE DISC MENU ENG NAL PS DEFAULT GE TNC 17 B ADULT SET PARENTAL CONTROL 3 5 DEFAULT DEFAULT Resets to all the manufacturer s original settings Press ENTER to perform the reset AUDIO SUBTITLE DISC MENU PARE DEFAULT NTAL LOAD FACTORY SETTING GB 37 DVD SETUP 4 PASSWORD SETUP PAGE 4 2 PASSWORD CHANGE 4 1 PASSWORD MODE You can change the password please type 6 digits as set PASSWORD MODE ON to lock the parental new password control function and OFF to adjust the parental control Note In case you forgot the password you can always level use the initial password 136900 e Need to input the password to select ON OFF e The initial password is136900 PASSWORD MODE GB 38 TECHNICAL SPECIFICATIONS Some external hard disks may not be supported Hard disks that have built in power supply should be favoured e Use a file system with FAT 32 format Some models of USB storage devices or MP3 players may not be supported The quality and speed for reading JPEG photos depend on the resolution amp the compression ratio of the photos Some JPEG photos may not be read due to the disc quality and the format e JPEG files can only be displayed correctly in 16 9 format e Some DVD R RW DVD R RW CD R RW discs may not be played due to the quality or burning cond
21. isplay language 1 1 TV DISPLAY display format TV DISPLAY WIDE 4 3 PAN SCAN OSD LANGUAGE POR 4 3LETTER BOX 16 9 WIDE SET TV DISPLAY MODE Reminder JPEG files can only be displayed in 16 9 format These options make it possible to choose the display format on the screen However the display format depends on the disc WIDE means the picture will be showed fully on screen at 16 9 ratio PS and LB the picture will be displayed in 4 3 format with black strips on the screen Select the display format ratio that matches your monitor screen and disc GB 34 DVD SETUP Monitor Screen Size Me N A e PanScan Letter box Picture Format on Disc E q 5 e iry ps E E kat 3 i ri a 3 i ES Art Note e The display format of DVD titles may vary please refer to the information that accompanies your specific DVD e Some DVD titles may be recorded in special formats In such cases the DVD titles will always appear on the screen in their original format regardless of which screen display format you select 1 2 OSD LANGUAGE On Screen Display OSD Language select the whole setup menu and on screen display language TV DISPLAY _ WIDE OSDLANGUAGE POR ENGLISH SP ETT ara aF EEA FAA AN UES ESPANOL SET OSD LANGUAGE GB 35 DVD SETUP 2 AUDIO SETUP PAGE 2 1 DOLBY DIGITAL SETUP 2 1 1 DUAL MONO DUAL MONO DYNAMIC L MONO R MONO MIX MONO DUAL MONO 1 1 SETUP The available settings are S
22. itions e Technical characteristics are for illustrative purposes only they may be changed without prior notice GENERAL Power requirement nn EER ESE 12 V DC 10 8 16V Grounding SySteM negative type Max current consumption 15A Max power output gt gt 40W x4 Nominal power output 9222 92 SG nnn nnn nnn nnn nnn nnn 22 W x 4 RM S Load impedance 40 4 8Q Fuse ratinQ EE EE nnn nnn nn nn nnn nnn nnn nnn nn nnn nn nn nnn nnn nnn nnn nnn nnn nnn nnn nnn nnn nnn EE EE nnn 1 0A DiM NSIONS n n 178 X 165 X 50 mm Weight nnn 2222 292 n nnn nnn nnn nnn nnn nnn nnn nnn nnn nn nnn 2 6 kg Video inputS EE EE nn nnn nn nnn nnn nnn
23. ker connections are incorrect Check speaker connections connection with an amplifier if ae With some discs 96 kHz output is prohibited Switch the output setting to 48 kHz the unit is performing as F FWD or F REV There is no sound during F FWD F REW playback playback The mute function is on Press the MUTE button to restore the sound The volume is too low volume is too low Increase the volume 0 the volume o operation is not available e operation is not possible en aa The prohibited mark is EG and operation is not The operation is not compatible with the disc This operation is not possible possible The pictures stops pauses and Reading of data has become impossible during After pressing STOP once start playback the unit cannot be operated playback once more GB 41 The player skips audio or video This unit is not firmly installed Check that the unit is installed firmly The disc is dirty or damaged Clean the disc or change it The picture is deformed The aspect setting is incorrect for the display Select the appropriate aspect setting for your display Note JPEG files can only be displayed in 16 9 format TROUBLESHOOTING symptom Cause Remedy 1 Playback is not possible The DVD has a different region code from this unit same region code as this unit Dialog language and subtitle The DVD playing does not have multiple You cannot select among multiple language can no
24. ly Press the 10 button to select a track or chapter with a number higher than 9 Press this button repeatedly to increase the number by ten e g 1 2 3_ etc 13 DISP display In DVD mode press to display the following information time elapsed or time remaining for the current title time elapsed or time remaining for the current chapter display off In VCD CD mode time elapsed for the current track time remaining for the current track time elapsed for the disc time remaining on the disc display off In MP3 mode time remaining for the current track or time elapsed for the current track Hold down this button to display the following information the current time front and rear monitor sources and available media 14 4 Press this button to eject a disc Hold down this button to open or close the TFT screen 15 IR F R Press this button to control the front or rear unit This function is disabled when no units are connected at the rear 16 SETUP In DVD mode press this button to display the DVD setup menu Hold down this button to display the system setup menu In other modes press the SETUP button to display the system setup menu 17 LOC SUB T local stations subtitles In FM radio mode press this button to receive the local stations only strong signal LOC ON local on is displayed Press this button again to turn off this function During DVD playback press this button to change the subtitle language 18 MENU In DVD
25. mode press this button to display the DVD menu GB 14 In radio mode press it to display RDS RADIO menu 19 pll play pause Press to start playback or resume playback REMOTE CONTROL OPERATION 20 IB PTY slow program type In DVD mode press this button to playback in slow motion forwards or backwards in the following sequence In radio mode press this button once to seek a station by program type Press it repeatedly to select a program type 21 AUDIO ST In FM radio mode press this button to select stereo or mono reception In DVD mode press this button to select the audio language In VCD mode press this button to select one of the following audio outputs MONO LEFT MONO RIGHT MIX MONO or STEREO 22 ZOOM AF In DVD VCD mode press to enlarge or reduce the picture size as follows In radio mode press this button to turn the AF function on off 23 LOUD Press to turn the loudness function on off 24 RDM TA random traffic information In playback mode press it to play tracks or chapters randomly In radio mode press to turn the TA function on off In other modes hold down the button to turn the TA function on off 25 RPT CLEAR In playback mode hold down this button repeatedly to select a repeat playback mode During digit entry press the button to clear the digit you have entered 26 GOTO In radio mode press this button and then use the number buttons to enter a frequency In DISC mode press the GOTO button a
26. nd the A YW cursors to select one of the following options and then press the ENTER button to go to the chosen option DVD mode TITLE CHAPTER AUDIO SUBTITLE ANGLE TT TIME CH TIME REPEAT TIME DISP GB 15 VCD mode TRACK DISC TIME TRACK TIME REPEAT TIME DISP In CD mode press the GOTO button to select one of the following fields DISC GOTO TRACK GOTO or SELECT total track number Then press the number buttons to select a time or track number In MP3 MPEG4 mode press the GOTO button to highlight the track or time and then press the number buttons to select a track or time Note The GOTO function may not work for some discs for example discs containing MP3 files GB 16 TOUCH SCREEN CONTROLS Besides using the unit and remote control to perform operations you can also do so by using the TFT touch screen RADIO 1 Display status of the disc FMi STERO 87 50MHz 3 3 98 00M 4 106 00M EQ OFF 1 87 50M 2 90 00M J N 5 108 00M 6 87 50M Loud OFF BAND LOC 8 fa 5 10 A description of the different icon functions follows below 1 This icon allows you to dim the screen backlight two levels 2 Display the system setup menu 3 Touch these icons to select one of the 6 preset stations Hold down one of the 6 numbers to store the current frequency under that preset station number 4 BAND This icon allows you to select one of the following bands FM1 FM2 FM3 MW1
27. nger time to force the disc to eject if there is a malfunction while the disc is loading 17 USB port Insert a USB device and the unit will automatically play the files on the device 18 Anti theft LED indicator This indicator will flash when the detachable control panel is removed 19 RESET Insert a sharp object such as a pencil into the RESET button to reset the unit 20 TFT touch screen 21 V A TILT Press one of these buttons to adjust the angle of the TFT screen 22 SETUP In DVD mode press the button to display the DVD setup menu Hold down this button to display the system setup menu In other modes press the SETUP button to display the system setup menu GB 11 REMOTE CONTROL N POWER MODE Gere di gt i om 13 GOTO 26 1 POWERO 2 MODE 3 BAND P N band TV system PAL NTSC 4 AMS ANGLE store stations automatically angle 5 TITLE 6 lt P gt 4 1 A V lt gt VENTER 7 N Stop 8 VOL VOL SEL select 9 MUTE AMA Loc B CUAND ANGLE SUB T SETUPS STA role Had Er CHC ENTER JILE N A voL C sg J your A ST PTY f ute proa auge me 4 Co GP Ce 200 7 T TA N 1 2 3 rom APT Ca BE 08 J CLEAR No CD OD Ge 10 PROG A B program repeat A B 11 EQ equalizer 12 0 9 10 number buttons 13 DISP display 14 amp Eject 15 IR F R front rear in Dual Zone mode 16 SETUP 17 SUB T
28. onds or longer The stations with good reception are stored automatically FRI B amp 30 gt FM 9740 gt FMI 98 50 gt FMI 100 00 Preset 1 Preset 2 Preset 3 Preset 4 Manual store In radio mode press the AMS button on the remote control to scan stations When your desired stations are searched long press the digit 1 6 to store RDS RADIO DATA SYSTEM OPERATION The RDS data are the PI PS TP PTY TA and AF DATA Pl Program identification Code for identifying program PS Program Service Name Broadcast station name data expressed in alphanumerically character TP Traffic Program identification data for traffic information broadcasting PTY See Using PTY to select Program on the next page TA Traffic Announcement function enabling the broadcast of traffic information AF Alternative Frequencies function enabling automatic search for the best alternative frequency available GB 22 RADIO OPERATION Setting AF MODE Press AF button briefly to switch on off AF mode AF is displayed when AF function is on With AF function on it automatically searches for the best alternative frequency available for the current station ALERT will be displayed when an emergency broadcasting is received meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum It is possible to programme the car radio so that it exits disc U
29. operly Poor quality reception The antenna is damaged or is not completely Extend the antenna fully If it is broke replace extended it If at any time in the future you should need to dispose of this product please note that waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with Your Local Authority or retailer for recycling advice Waste Electrical and Electronic Equipment Directive GB 43
30. splay the same source as the one selected on the unit Controlling the unit or rear monitor Press the IR F R button on the remote control to control the unit or the rear monitor Note This function is switched off when the rear monitor is not available GB 8 FRONT PANEL GB 9 S N J GIE a y BASIC OPERATION 1 TA Traffic Announcement In radio mode press the TA button to turn the traffic announcement function on off 2 PTY Program Type In radio mode press once to seek a station by program type Press it repeatedly to select a program type 3 LCD screen 4 REL button Press this button to unlock the detachable front panel 5 VOL SEL button Adjust the volume by turning the button clockwise or counter clockwise Press this button briefly to display the menu You can choose one of the following settings L front R front L rear R rear Sub woof Bass Middle Treble TILT Volume Rotate the button to adjust the desired settings 6 IR window Receives the infrared signal from the remote control 7 POWER MUTE Press this button to turn on the unit Press and hold down the button for 1 second to turn off the unit When the unit is switched on press the button briefly to shut off the sound output Press it again to resume the previous sound level Q Mddd bhlEPI buttons In radio mode press one of these buttons to seek a station automatically Hold down one of the buttons to seek a station manually
31. st the setting 4 Video rs voeo F Bright Hue Contrast Volume 30 Sharp Ls Front Rear Audio Video Sys Bright Adjust the screen brightness Hue Adjust the screen hue Contrast Adjust the screen contrast Sharp Adjust the screen sharpness 5 SYSTEM A SYSTEM Clock Sys ry Switch page button Key Beep ir Local Area Front Rear Audio Video Srs Exit Clock Sys Select 12 hour or 24 hour clock display Key Beep ON Enable button beep sound OFF Disable beep sound GB 19 Local Area Select the option that corresponds to the zone in which you are located SYSTEM SETUP YS SYSTEM _ Bass freq Middle freq Treble freq Front Rear Audio Video Sys Bass freq Adjust the bass Middle freq Adjust the middle frequencies Treble freq Adjust the trebles SAI Gua Subwoofer Bass Q factor Mid Q factor Front Rear Audio Video Sys Subwoofer Adjust the subwoofer frequencies Bass Q factor Adjust the quality of the bass frequencies Mid Q factor Adjust the quality of the middle frequencies LN SYSTEM Clock Adjust Zz Night Lum ae Ad Touch Adjust Front Rear Audio Video Sys Exit Clock Adjust Adjust the time Night Lum dimmer Adjust the screen backlight brightness Touch Adjust When using the product for the first time or the touch screen does not work properly perform the following touch adjustment X lt press it Accurately pr
32. t selected language recordings languages if they aren t recorded on the disc indicated in the disc menu No subtitle is displayed Subtitles are not displayed if they are not recorded on the disc indicated in the disc menu Playback is not with the audio The DVD playing does not have audio or Switching to a selected language is language and subtitle language subtitles in the language selected in the not possible if the language selected in settings selected in SET UP SET UP MENU the SET UP MENU is not recorded on MENU the disc GB 42 The picture is extremely The disc features a signal to prohibit Since this unit is compatible with the unclear distorted and dark during copying some discs may have this copy guard analogy copy protect playback system when playing a disc that has a signal prohibiting copying the picture may suffer from horizontal stripes or other imperfections when viewed on some displays This does not mean this unit is malfunctioning No display in video mode The brown wire is not connected to the Connect the brown wire to the parking parking brake No display from the reversing The orange wire is not linked to the Connect the orange wire to the camera when the reverse gear is reversing sensor or to the reversing light reversing sensor or the reversing light engaged Problems Causes Impossible to receive stations The antenna is not properly connected E the antenna pr
33. t route wiring in places that the heat may melt the wiring insulation When replacing the fuse ensure that the new fuse has the capacity recommended by the manufacturer GB 3 PRECAUTION OPERATION PRECAUTIONS Do not operate the player with scratched bent or broken discs When a disc is not loaded properly do not force it into the disc loader Never insert any other objects into the disc loader like a coin or pin etc as this may cause damage or a short circuit Do not use different disc formats other than 8 cm or 12cm round discs Please dispose of used batteries according to the regulations in your country If the unit is disconnected to the battery it will lose memorized data If the source disc has poor sound quality due to scratches dirt or a bad recording the playback sound quality may be poor ke xX N X E Remote control Do not let the remote control fall onto the floor where it may become jammed under the brake or accelerator pedals Do not short circuit disassemble or heat the battery Do not dispose of the battery in a fire Dispose of used batteries properly IMPORTANT Please adjust the touch effect on the TFT screen when you use the unit for the first time For more details please refer to SYSTEM SETUP 5 SYSTEM Touch Adjust GB 4 INSTALLATION REMOVAL AND ELECTRICAL CONNECTIONS NOTE The unit should be installed horizontally do not go beyond an angle of over 30 from to the hori
34. to display the DVD player menu Note This function is operated by using the remote control Note Auto switch to video When playing a DVD whilst driving there is DVD PARKING BRAKE display on the screen This message warns you that you must stop the car and activate the hand break in order to access the video mode Auto switch when reversing the car When reversing the car the screen of the unit will show reversing view automatically if a reversing camera is connected 15 Repeat a specific segment on a disc 1 During normal playback press the A B button once to determine to the starting point of the segment to be repeated and A will appear on the screen 2 Press A B again to determine the end point of the segment to be repeated and A B will display on the screen 3 Set point A to set point B will be repeated in a loop until you turn off A B repeat 4 Press A B again to cancel the A B repeat mode GB 33 DVD SETUP At STOP mode press SETUP button on the remote control to display the setup menu It includes General Setup Audio setup Preference Page Password Setup and Exit Setup menu 1 Within the setup menu you can use 4 y lt 4 gt buttons on the remote control to move the cursor and then press the ENTER button to make your selection Press 4 can return to the previous menu 2 To exit setup menu you can press SETUP button 1 GENERAL SETUP PAGE setup TV screen display format and on screen d
35. utton on the remote control to perform fast rewind or fast forward o A 16 32 VCD CD 1 Playing a VCD CD Insert a VCD CD disc into the slot The unit will automatically switch on If a disc is already loaded press the II PLAY button to start playback 2 Quick track selection During VCD CD playback first press 4 button to return to the beginning of the current track Press this button again to play the previous track Press the FFIbutton to play the next 3 Repeat play During VCD CD playback hold down the RPT button on the remote control to repeat a track Hold it down again to repeat all default mode GB 25 DVD VCD CD MP3 MPEG4 XVID OPERATION 4 Play track at random During VCD CD playback press the RDM button on the remote control to play any track at random Press this button again to return to normal play Note This function can only be operated by using the remote control 5 Number buttons Use the number button to select a track to play Note This function can only be operated by using the remote control 6 Stop play During VCD CD playback first press the m button to stop playback Press the Mil button to resume play Press the m STOP button twice to stop playback completely Note This function can only be operated by using the remote control 7 Pause playback During VCD CD playback press the FI button on the unit or the remote control to switch between play and pause 8 Skip backward forward F F F
36. wing angle if different angles are available on the disc TITLE In DVD playback mode press the button to display the title menu _ lt p gt 4 1 A W 4 gt ENTER In the setup menu use the A W gt buttons as cursors and then press ENTER to access the selected item or confirm the selection In radio mode press the H4 buttons to go from one preset station to another Press the lt lt or M button to seek a station automatically Hold down the lt 4 or gt button to seek a station manually In DVD USB CARD mode press the H4 buttons to select the previous or next file Press the lt gt buttons to fast forward or fast rewind stop Press to stop playback VOL VOL SEL select Refer to point 5 in the BASIC OPERATION section MUTE Press this button to shut off the sound output Press it again to resume the previous sound level 10 PROG A B program repeat A B GB 13 In DVD VCD CD mode press this button to set programmed playback In DVD VCD mode press this button to repeat a specific section A B on a disc 11 E edualizer Press this button to select a preset equalizer mode REMOTE CONTROL OPERATION 12 0 9 10 number buttons In radio mode press the number buttons 1 6 to select a preset station Hold down one of these buttons to store a station under the corresponding preset number During playback press the number buttons to select a chapter or track direct
37. with DVDs featuring multi angle recordings The en symbol on a DVD packaging indicates that it features multi angle scenes The number in the Ens symbol indicates the number of angles from which scenes were shot The ANGLE button does not function during fast forward fast rewind or pause 12 Changing audio language multi audio DVDs can provide audio playback with different languages With DVDs featuring multi audio recordings you can press the AUDIO button to switch between language and audio systems during playback Note This function can only be operated by using the remote control for some DVDs you need to change the language in the menu This function is only available with DVDs featuring multi audio recordings The number in the symbol on a DVD packaging indicates the number of recorded languages audio systems 13 Changing the subtitle language multi subtitle With DVDs featuring multi subtitle recording press the SUB T button to switch between subtitle languages during playback Note This function can only be operated by using the remote control for some DVDs you need to change the language in the menu This function is only available with DVDs featuring multi audio recordings The number in the ES symbol on a DVD packaging indicates the number of recorded subtitle languages GB 32 DVD VCD CD MP3 MPEG4 XVID OPERATION 14 Using the menus In DVD mode press the TITLE button on the remote control
38. zontal Before the final installation first complete the electrical connections DIN FRONT MOUNT Installation of the unit 1 Metal Sleeve Install the metal sleeve in the dashboard For optimum performance of the CD player the unit should be positioned as horizontally as possible do not go beyond 30 from the horizontal Fix the metal sleeve into place by pushing the metal tabs outwards using screwdriver Then complete the electrical connections page 7 2 Front Mounting Slide the main unit into the metal sleeve until the springs at either side of the radio snap into the sleeve openings 3 Removing the Radio Insert the release keys supplied with the unit into the grooves at both sides of the unit until you hear a click sound Then remove the unit from the dashboard by pulling the release keys towards you GB 5 ATTACHING amp REMOVING THE DETACHABLE FRONT PANEL REL button Removing the detachable front panel Press the REL button to unlock the front panel Push the front panel to right and pull the left side of the front panel away from the unit as shown in the figure Attaching the detachable front panel First insert the right side of the front panel as shown in the figure and gently push the left side of the front panel onto the unit until you hear a click sound which confirms that the front panel is firmly attached Note Remove the protective plastic film from the screen in order to ensure optimum us
Download Pdf Manuals
Related Search