Hytera-X1p-Digital-Mobile-Radio-300528
Contents
1. 24 Documentation Conventions For your better understanding of this manual please read the following conventions first Instructional Icons lem Description 0000 Q Note Indicates references that can further describe the related topics A Caution Indicates situations that could cause data loss or equipment damage fDIndicates functions that are ailable on digital channel only available on analog channel only Functions marked with no function icons are available on both analog and digital channels Notational Conventions The quotation marks enclose the name of a software interface element For example click OK The text in boldface denotes the name of a hardware button For example press the PTT key The symbol directs you to access a multi level menu For example to select New from the File menu we will describe it as follows File gt New Key Operation Short press To press a key and release it quickly To press a key and remain holding Long press it down for a predefined period 2 seconds by default To press a key and remain holding it Hold down Checking Items in the Package Please unpack carefully and check that all items listed below are received If any item is missing or damaged please contact your local dealer Radio Unit Battery Antenna Strap Charger Power Adapter2. Vibration 34 Emergency On 35 Emergency Off 36 P Channel 1 37 LQO 38 Covert Mode Note Function To enable or disable the VOX feature quickly To enable or disable the BT feature quickly To upload GPS data to the system immediately To enable or disable the Option Board function To send Morse code To enable or disable the Receiving Vibration feature quickly To activate the emergency alarm To deactivate the emergency alarm To switch the channel quickly The target channel preset by the dealer is a channel from any zone To enable or disable LQO Loudness and Quality Optimizer quickly To enable or disable the Covert mode quickly e Long and short press of a key can be assigned with different functions by your dealer e Short press of the TK key is assigned with the Emergency On feature long press assigned with the Emergency Off feature You can also assign it with other features via your dealer Before Use Charging the Battery Caution Make sure the radio is powered off during charging Use only the charger and battery specified by Hytera Charger LED can indicate the charging process The following figure shows steps for charging 1 Connect the power adapter to AC socket See ar row 1 2 Plug the power adapter into the rear jack of the charger See arrow 3 Place the radio with the battery attached or the battery alone into the charger Durin
3. Note The frequency band is marked on the label of antenna if not please refer to the label on the terminal for frequency band information Product Introduction This section introduces the mechanical structure and the programmable features of this radio Product Controls CH a0 0009 No PartName No PartName Radio On Off Volume 12 6 Antenna 16 PTTKey Channel Selector 8 LED 18 Speaker 9 LCD Display Microphone 2 Microphone 1 Programmable Keys For enhanced convenience you may request your dealer to program the keys SK1 TK P1 and P2 as shortcuts to the functions listed below For detailed introductions of the functions please go to the chapter Functions and Operations No 1 11 12 13 14 Shortcut Key Zone Up Zone Down Keypad Lock Contact List Message fn Call Logs Adjust Power Level Talk Around Monitor 2 Squelch Off Squelch Off Momentary EA Home Screen Scan Function To select a desired zone quickly To lock or unlock the keypad quickly To access the menu Contact List quickly To access the menu Message quickly To access the menu Call Logs quickly To adjust power level quickly To enable or disable the Talk Around feature quickly To enable or d
4. The feature allows you to quickly return to the previous menu or the home screen In the editing screen press the P2 key and the radio exits the screen and returns to the previous menu immediately in other screens press this key and the radio returns to the home screen immediately Managing the Contacts You can have management of your contacts via the menu Contact in the radio Contact List You can save up to 512 entries of private call contact information in the list To access this menu select Contact gt Contact List or press the shortcut key for Contact List Control Services fn You can send to a private call contact the following commands Alert Call Radio Check Remote Monitor Radio Enable or Radio Disable See the Manual Dial below for details Editing a Contact fn You can edit the number and alias of each private call contact Viewing a Contact You can view details of each contact Deleting a Contact fn You can delete a private call contact However please note that you can not delete the contact when there is only one entry left in the list or the private call contact preset on the currently used channel New Contact fi You can add a private call contact to the contact list The number and alias of each contact must be unique and the available number range is 1 16776415 Note e You can press the key to switch the input method when editing the alias e Besides adding
5. the radio can communicate via any site in the IP Multi site Connect system thus ensuring seamless communication in the system Operation Enable or disable Roam feature via the Roam menu Press the programmed Roam key to enable or disable the feature Adjust Power Level With this feature you may switch power levels 13 quickly Generally we recommend you to adopt low power for battery saving However if you cannot communicate with radios located at a distant place with low power please select high power Press the programmed Adjust Power Level key to switch between high power and low power from low power to high power a high pitched tone sounds from high power to low power a low pitched tone sounds Note Power level should be set for each channel respectively Talk Around You can continue to communicate in DM mode by pressing the programmed Talk Around key when your repeater malfunctions or when your radio is out of the repeater s range but within talking range of other radios Press the programmed Talk Around key to enable the feature a high pitched tone sounds To disable the feature press this key again a low pitched tone sounds 26 r a Monitor To adjust match conditions for signal receiving you can enable the Monitor feature Press the programmed Monitor key to enable the feature and the radio displays icon To disable the feature press this key again H
6. ACK from the companion or control center automatically ah iT Emergency ID Type Your radio supports three Emergency ID types You can select one of them via your dealer Emergency ee ID Type Description N No signaling is used when the radio one sends alarm information HDC1200 signaling is used when the radio sends alarm information 5 Tone signaling is used when the radio sends alarm information HDC1200 5 Tone Emergency Mode Except Siren Only other emergency types support the following three Emergency modes You can select one of them via your dealer Note For the following operation methods we take the Regular type as an example mee Description In this mode you can send alarm information to your companion Alarm or control center by pressing the programmed Emergency On key but you cannot talk with them In this mode you can send alarm information by pressing the programmed Emergency On key When the icon appears you can hold the PTT key to speak into the microphone Your voice and background noise to be transmitted automatically Note If the Alarm with Call To Follow feature is enabled by your dealer you can speak into the microphone without holding the PTT key Alarm with Call Emergency Mode Description In this mode press the programmed Emergency On key to go to the Revert Channel and you can hold the PTT key to speak into the microphone when the
7. HDC1200 only The emergency alarm receiving party exits the Emergency mode in any of the following ways None When an alarm is received the receiving party can press any key to exit the emergency alert When the alarm initiator exits the Emergency mode or when the Alarm Cycles expire the receiving radio will exit the emergency alert automatically 5 Tone When an alarm is received the receiving party can press any key to exit the emergency alert HDC1200 When an alarm is received the receiving party can exit the emergency alert by pressing the TK key within 2s after pressing the Back key or switching the channel or powering off the radio Alarm with Call None 5 Tone amp HDC1200 Initiating an emergency alarm 1 Press the programmed Emergency On key to send alarm information None HDC1200 The radio displays icon and text information Sending Alarm with LED glowing red gt Tone The radio sends the ID first the icon and text information Sending ID will be displayed and then transmits the emergency alarm the icon and text information Sending Alarm will be displayed with the LED glowing red Note As for None and 5 Tone emergency ID type if Local Emergency Alarm is enabled via the programming software the radio will give an alarm tone 2 If the Alarm with Call to Follow feature is enabled you can speak into the microphone to make an emergency call when the radio dis
8. ID alias length and value and then save it See the details in the following table Item Key ID Description The ID consists of numbers only in the range of 1 255 The alias can contain 16 characters at most composed of Chinese characters English letters numbers and symbols O Note The key alias cannot be the same with the key ID Key Alias This is used to define the length of the key The value can consist of numbers and letters A F within the predefined key length Key Length Key Value Save the created key to the key list Save 2 Note If you need to delete a key please request your dealer for help Radio Registration Service fn This feature can be enabled via the programming software Your radio will automatically register in the system within a certain period after power on Then it can acquire online information of other radios via accessing specific servers within the valid registration period GPs 08 With the enabled GPS feature when the system requires GPS information your radio will upload its positioning information to the system in the method set by the dealer 19 You can upload the GPS information by pressing the GPS Report key programmed by the dealer You can configure GPS via the menu Accessories gt GPS in the radio GPS On Off This option allows you to set whether to enable the GPS feature Note Enabling the GPS feature will shorten the operating t
9. List Contact Power Level G eee wee oR st Encrypt Backlight Drafts Brightness Keypad Lock LED Tone Select Locked Key Priority Man Down Lone Worker Password Basic Operations Powering On Off Rotate the Radio On Off Volume Control knob clockwise counter clockwise until a click is heard to turn the radio on off Adjusting the Volume After turning the radio on rotate the Radio On Off Volume Control knob clockwise to increase the call volume or counter clockwise to decrease it Selecting a Zone A zone is a group of channels exhibiting the same property and is programmed by your dealer The radio supports up to 64 zones each with a maximum of 16 channels You may select a zone through any of the following methods Through menu selection Go to the menu Zone and use the Up Down key to select your desired zone Through the function keys You may quickly toggle to your desired zone by pressing the programmed Zone Up or Zone Down key Selecting a Channel After turning the radio on rotate the Channel Selector knob to select a desired channel You can also switch to the designated channel by pressing the programmed Preset Channel key If the Channel Notify function is active you will hear 6 the corresponding channel number when switching to any channel Switching the Channel Mode Each channel can be programmed as either analog channel or digital channel If the current zone includes
10. Powering On Off Adjusting the Volume Selecting a Zone Selecting a Channel Switching the Channel Mode Locking Unlocking the Keypad Using the BT Devices Private Call amp Group Call All Call Qa Calls on Analog Channels Sending Morse codes Receiving Vibration 9 Phone 9 Time out Timer TOT 9 Busy Channel Lockout 10 Pseudo Trunking EE S 10 Functions and Operations 10 Home Screen 10 Managing the Contacts 10 Message 11 Work Orders 11 Call Logs 11 VOX 12 MIC AGC 12 Audio Feedback Suppression 12 LQO 12 Rent 12 Sc
11. are operatin Keypa the ee i Law The tone given when the radio is in low Battery battery status Then you will need to replace the battery Call End The tone given upon a call ending The tone given when the radio receives Group Call a group call The tone given when the radio receives privare al a private cal This option decides whether the radio Voice End sounds an alert tone after it stops receiving Tone Description The announcement given when you are switching the channels via the Channel Channel Selector knob The radio announces Notify the channel number only if the channel is switched via the Channel Selector knob or Channel Up Channel Down _ Preset Channel key The continuous tone given when the Signaling radio is transmitting the signaling It is Side Tone available for call in HDC1200 5 Tone 2 Tone system Emer The tone given when an emergency Alarm alarm is received Priority The tone given when the radio Channel observes the priority channel Alert Call The tone given when an alert call is aa received oo Poweron The tone given when the radio is powered on Vibration This option is to set whether to enable the Vibration feature With this feature enabled the radio can give vibration indications upon the receipt of a message private call or alert call Password To set the power on password for the radio Option Board When the option board is enabled it allows a third party to achieve fu
12. both analog and digital channels you may switch between digital and analog channels Locking Unlocking the Keypad When the keypad is not in use you can lock the keypad to prevent accidental keypad operation The following methods are available for you to lock or unlock the keypad Key Combination Use OK to lock or unlock the keypad Programmable Key Press the programmed Keypad Lock key to lock or unlock the keypad Menu Selection Go to Settings gt Radio Set gt Keypad Lock and then select Enable or Disable Enable The keypad will be locked automatically if no operation is made within the Keypad Lock Time which can be configured via the Up Down key range 5 60s Disable The keypad will not be locked automatically However you can lock or unlock the keypad via the key combination or Keypad Lock key mentioned above Note Except P1 and P2 other keys on the keypad are lockable by default Besides you can decide other keys and knobs to be locked via the menu Settings gt Radio Set gt Select Locked Key The Select Locked Key includes the following options TK Channel Selector knob P1 P2 SK1 and Volume knob Using the BT Devices BT is a kind of wireless technology that supports short distance generally within 10m communications and information exchange between devices such as mobile phones PDAs wireless earpieces laptops etc Caution e For optim
13. it upright You can enable or disable the Man Down feature by pressing the programmed Man Down key or via the menu Settings gt Radio Set gt Man Down The radio gives a high pitched tone when the Man Down feature is enabled and a low pitched tone when the feature is disabled Lone Worker This feature is ideal for persons who work lonely If you encounter an incident and cannot operate your radio within the preset time period your radio will alarm automatically to summon help from your companion 1 To enable the feature Go to Main Menu gt Settings gt Radio Set gt Lone Worker and select Enable or press the programmed Lone Worker key a high pitched tone sounds or turn on the radio if the feature is enabled via the programming software 2 If you cannot operate your radio within a preset response period your radio will give alerts before this period expires dependent on the settings by your dealer At this time you can terminate such alerts by rotating a knob or pressing a key When the response period expires your radio will trigger the current emergency system automatically 3 To disable the feature Go to Main Menu gt Settings gt Radio Set gt Lone Worker and select Disable or press the programmed Lone Worker key a low pitched tone sounds Note If the Lone Worker feature is not disabled before your radio is powered off it will remain enabled when powered
14. new contacts you can also save the unidentified numbers from the Call Logs into the contact list Manual Dial i You can manually input the required ID for calling On a digital channel if your radio supports both private call and group call you can switch between them by pressing The LCD will display appropriate ID For a private call ID you can select any of the following options Supplementary Description Service You can send an alert call to a Alert Call private call contact The called party will see the alert and can call you back 10 You can send a Radio Check command to a private call contact so as to confirm whether it is powered on or running on the current channel without disturbing it You can enable the microphone of Remote Monitor g private call contact and monitor Radio Check fd AD its activities or background voice remotely Radio Enable YOu can enable the radio of a M private call contact remotely and allow it to be used normally You can disable the radio of a private call contact remotely and disallow it to be used normally Radio Disable The disabled radio can be A monitored remotely but other features will be locked out It can only be revived by reprogramming through the CPS or through the Radio Enable command Message Sending a message 1 Go to Message gt New Msg 2 After editing the text press the OK key 3 Select the
15. request your dealer to set the One Touch Call key By pressing the programmed key you can make corresponding services detailed as below Services on the analog channel to send calls to the 5 Tone or 2 Tone contact Services on the digital channel gt To send group calls or messages to the group call contact To send private calls messages or make control services to the private call contact The control services contain Alert Call Radio Check Remote Monitor Radio Enable or Radio Disable Alert Call You can send an alert call to a private call contact The called party will see the alert and can call you back Radio Check You can send a Radio Check command to a private call contact so as to confirm whether it is powered on or running on the current channel without disturbing it Remote Monitor You can enable the microphone of a private call contact and monitor its activities or background voice remotely Radio Enable You can enable the radio of a private call contact remotely and allow it to be used normally Radio Disable You can disable the radio of a private call contact remotely and disallow it to be used normally Operation Service Operation Press the One Touch Call key and then hold the PTT si ey To send calls on the analog channel Sending a Message To make control services on the digital channel To send private calls group calls on the digital channel Press the One Touch Cal
16. to send PTT ID 2 Go to the menu Contact List and select a required contact Then hold the PTT key to send a selective call Private Call Group Call All Call For encoding the radio will provide the following indications PTT ID Selective Call Your dealer can program whether the radio sounds side tone during encoding or beeps after encoding Selective Call During encoding the LED glows red and the LCD displays the appropriate call icon Private Call 9 Group Call 9 All Call After encoding the LED glows orange Decoding For decoding the radio provides the following indications PTT ID After decoding the LCD displays the icon and ID or alias of the transmitting party Selective Call After decoding the radio provides the following indications Tone The radio will give the tone by default LED The LED glows green gt If your dealer enables the Display Decode ID feature the radio will display the appropriate call icon Private Call Group Call All Call ale and alias of the transmitting party ID of the transmitting party will be displayed if it is not in the contact list If your dealer does not enable the Display Decode ID feature the radio will display the appropriate call icon only 5 Tone This radio can realize various types of calls through 5 Tone signaling Encoding 1 Request your dealer to configure the correct format and type for the encodi
17. ways Press the programmed Emergency Off key Turn the radio off Once the Alarm Cycles expire the radio will exit the Emergency mode automatically When an alarm is received the receiving party can exit the emergency alert by pressing the TK key within 2s after pressing the Back key or switching the channel or powering off the radio Alarm with Call Initiating an emergency alarm 1 Press the programmed Emergency On key to send alarm information The radio displays icon and text information Sending Alarm with the LED glowing red 2 Hold the PTT key the LCD displays the icon C gt with the LED glowing red and speak into the microphone to transmit the emergency call Note If your dealer has enabled the Alarm with Call To Follow you can speak into the microphone without pressing the PTT key when the LCD displays the icon S gt Ifthe preset Voice Cycles expire you can hold the PTT key to make the emergency call again 3 And when a call is received the icon Ce appears When the icon appears you can hold the PTT key the icon C gt appears with the LED glowing red to speak into the microphone Exiting the emergency alarm To exit the Emergency mode press the programmed Emergency Off key or power off the radio When an alarm is received the receiving party can exit the emergency alert by pressing the TK key within 2s after pressing the Back key or switching the channel or powering off the
18. Hytera OWNER S MANUAL FA w HA B Preface Thanks for your favor in our product To derive optimum performance from the product please read this manual and the supplied Safety Information Booklet carefully before use This manual is applicable to the following model X1p Digital Portable Radio Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Co Ltd the Company in PRC and or other countries or areas The Company retains the ownership of its trademarks and product names All other trademarks and or product names that may be used in this manual are properties of their respective owners The product described in this manual may include the Company s computer programs stored in memory or other media Laws in PRC and or other countries or areas protect the exclusive rights of the Company with respect to its computer programs The purchase of this product shall not be deemed to grant either directly or by implication any rights to the purchaser regarding the Company s computer programs Any of the Company s computer programs may not be copied modified distributed decompiled or reverse engineered in any manner without the prior written consent of the Company The AMBE 2 voice coding technology embodied in this product is protected by intellectual property rights including patent rights copyrights and trade secrets of Digital Voice Systems Inc This voice coding t
19. Note You cannot respond to a received all call rw Calls on Analog Channels To transmit a call on the analog channel hold the PTT key and speak into the microphone To receive release the PTT key Sending Morse codes Morse code is a method of transmitting textual information as a series of on off tones lights or clicks that can be understood by the receiving party It is usually used for secret communication When pressing the PTT key press the programmed Morse Code key to transmit a Morse code Release the Morse Code key to stop the transmission Different length of the press makes different Morse 9 codes You can transmit the signals with Morse code combination If the Signaling Side Tone is enabled both the transmitting and receiving parties will hear the tone during the transmission of the Morse code Receiving Vibration When receiving an audio signal the radio will keep vibrating until receiving ends with the received voice muted You can enable or disable this feature via the programmed Receiving Vibration key Phone If the repeater is connected with a PSTN gateway the radio can communicate with the phone via it Initiating a Call 1 Access the phone system Live Dial Hold the PTT key and enter the access code with keypad Then release the PTT key The radio beeps and displays the dialing information When the phone system is accessed successfully the radio goes to the DTMF keypad mode B
20. Paired Devices and select Search PTT to start searching 5 When the wireless PTT is found enter Devices List to find the alias of the PTT and select Connect When the connection is done the prompt Connect Success will be displayed on the LCD and the LED will flash blue once every 2s Call To ensure optimal volume of the receiving radio hold the palm microphone approximately 2 5 to 5 centimeters away from your mouth Private Call Initiating a Call You may transmit a private call through any of the following methods When the radio transmits a private call the icon AG will appear on the LCD Transmitting a call to the preset contact In the home screen hold the PTT key to transmit a private call to the private call contact preset for the current channel Note Your dealer may preset a contact for each digital channel The preset contact could be a private call contact a group call contact or an all call contact Transmitting a call through Contact List or Call Logs 1 Go to Contact gt Contact List or go to Call Logs and access the Outgoing Incoming Missed list 2 Use the Up Down key to select the private call contact you want to call 3 Hold the PTT key to transmit the private call Through manual input 1 Go to Contact gt Manual Dial 2 Input a private call contact you want to call 3 Hold the PTT key to transmit the private call Note e If
21. RF energy exposure limits in the above standards and guidelines users should transmit no more than 50 of the time and always adhere to the following procedures Your radio radiates measurable RF energy only while it is transmitting during talking not when it is receiving listening or in standby mode FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct The interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet ona circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Operation is subject to the following two conditions 1 This de
22. Simplified 1 Press to switch to Chinese Pinyin mode 2 Enter the pinyin through alphanumeric keys then a list of possible combinations and corresponding characters will appear 3 Use the Up Down key to choose the right pinyin 4 Press the OK key to highlight the characters and choose the right character using the Up Down key 5 Press the OK key to enter the selected character You can repeat the above steps to continue English 1 Press to switch to uppercase English or lowercase English mode 2 Press the key which bear your desired letter repeatedly until the letter appears You can repeat the above steps to continue Number 1 Press to switch to Number mode 2 Enter the numbers through alphanumeric keys DH to Sm Special Character To enter common punctuations and special characters press 1 lt 23 To input a space press Note You can use the Up Down key to move the cursor leftward rightward in the entered text Signaling Introduction The radio supports the following signaling You can ask your dealer to make appropriate settings on your radio For detailed information please consult your dealer HDC1200 The HDC1200 signaling is compatible with the MDC1200 signaling and realizes functions such as PTT ID Encoding amp Decoding Emergency Encoding amp Decoding and Selective Call Encoding amp Decoding Encoding 1 Hold the PTT key during normal voice communication
23. al communication quality it is recommended to use our specified BT devices the wireless earpiece and wireless finger PTT find the device model number in Optional Accessories chapter To learn the detailed functions and operations of the devices refer to the corresponding manual e If you use other company s BT earpiece you will need to use it with our specified wireless finger PTT otherwise you will not be able to transmit via this earpiece For clear voice communications when using the devices please place the radio as required below When the radio is worn put it and the devices on the same side with the radio s front case the case with the LCD outwards When the radio is not worn keep it within 2m away from the devices with its front case towards the devices Connect the BT devices to the radio in the following steps 1 Turn on the radio 2 Activate the BT feature by pressing the pro grammed BT key or via the menu Accessories gt BT gt On Off When the LED glows blue and then flashes blue once every 3s it indicates the BT feature of the radio is enabled Note The wireless PTT and wireless earpiece must be searched and connected separately As the operations on them are the same we take the wireless PTT as an example below 3 Turn on the BT device and enter the pairing Refer to the corresponding accessory manual for the operations 4 Goto menu Accessories gt BT gt
24. an 12 Roam if 13 Adjust Power Level 13 Talk Around 13 Monier se ee 13 Squelch Off a Adjust Squelch Level 13 One Touch Call 13 Telemetry PE 14 Priority Interrupt 14 Emer Alarm 15 Man Down 18 Lone Worker 18 Covert Mode 18 Scramble 4 Encrypt find 18 Radio Registration Service E 19 CPS aa 19 Radio Set 19 Programming 20 Device Info 20 Battery Power Indicator 20 Troubleshooting 21 Care and Cleaning 21 Optional Accessories 22 Appendix 23 Input Method 23 Signaling Introduction 23 5 TONE 23 2 TONG
25. ated by H and Low power is indicated by 0 Language To set the language used in the radio interface Backlight This menu allows you to set the backlight Activating the backlight can illuminate the LCD and the keypad so as to facilitate your operation under dim light conditions Off The backlight will always remain off On The backlight is on all the time Timed If no operation or signal transmission receipt occurs within the time preset by the dealer the backlight will be turned off automatically Brightness This option allows you to set the display brightness You can raise or lower it using the Up Down key LED This menu allows you to set whether to turn on LED indicator Generally the LED indicator can indicate TX RX Scan Roam status Low Battery etc The indications of the LED are set by the dealer Tone You can select the tones on actual requirements Tone Description Radio This feature disables all the tones Silent This option decides whether the tone will be given during transmission The following options are available Disable no tone indication for transmission Digital Only tone indication for Talk Permit transmission on digital channels only Analog Only tone indication for transmission on analog channels only and Enable tone indication for transmission on both analog and digital channels TextMsg The tone given when the radio receives a message The tone given when you
26. ation Radio Status green The LED glows red Transmitting green The LED flashes Scanning orange slowly The LED flashes Emergency orange rapidly No voice is being transmitted or received on the channel after a call is established Within such period you can hold the PTT key to talk The LED glows orange The LED glows blue when the BT is being powered on blue and then turns and turns to flash once every to flash once every 3s when the BT is powered 3s on without any BT device connected The LED flashes BT devices are connected blue once every 2s The LED glows Menu Navigation The following figure shows an overall menu structure of the radio You can customize these menus as per your requirements via your dealer Press the Menu key to enter the main menu then enter the submenus or options via the Up Down key and press the OK key to complete the configuration The introductions of the menu operations mainly introduce the path to the menus This radio supports menu reset function that is if you do not operate the menu for a predefined time period the radio will automatically return to the home screen However you can modify the reset time or cancel the reset feature via your dealer Logs ming ries Radio Vibration Color Code Rent VOX LQO Covert Mode 0000 Phone Scan Device Frequen BT Contact going List On Off Info cy Manual Dial Quick Manual Scan cs Text Dial
27. contact or input the contact number manually 4 Press the OK key to send the message When the message is sent successfully the radio will display Send Success on the LCD You can send the Quick Text or forward the message saved in the InBox OutBox or Drafts See the detailed introductions of the submenus of Message respectively 11 New Msg You can create a new text message 256 characters at most and save it to Drafts or send it to a private call contact or a group call contact Quick Text Under this option there are some text messages 25 entries at most preset by your dealer You can choose to edit and send any entry InBox The radio saves the received messages into the InBox and gives every message a corresponding icon to show whether it is read Jj Read message o g Unread message The InBox can save up to 20 received messages When it is full the icon will appear and the earliest message will be overwritten by the latest one automatically For each message you can choose to perform any of these operations Reply Forward View Details and Delete To delete all messages in the InBox select Message gt Inbox gt Delete All OutBox The following icons will appear to indicate whether the message is sent successfully 34 Message is sent successfully Z Failed to send message The radio can save up to 20 sent messages When the OutBox is full no icon will appear
28. e your communication may be loud blocked by high buildings or frustrated in the underground areas You may suffer from external disturbance Stay away from equipment that may cause such as electromagnetic interference interference The GPS cannot Move to an open and flat area and restart the The BT device The device has low power Recharge the BT device cannot be paired The device is too far away from the radio Move it towards the radio If the above solutions can not fix the problems for you or you may have some other queries please contact us or your local dealer for more technical support 21 Move to an open and flat area and try again Care and Cleaning To guarantee optimal performance as well as a long service life of the product please follow the tips below Product Care Do not pierce or scrape the product Keep the product far away from substances that can corrode the circuit Do not hold the product by its antenna or earpiece cable directly Attach the accessory jack cover when the product is not in use Product Cleaning Caution Power off and remove the battery before cleaning Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint free cloth or a brush regularly Use neutral cleanser and a non woven fabric to clean the keys control knobs and front case after long time use Do not use chemical preparations such as sta
29. echnology is licensed solely for use within this product The user of this technology is explicitly prohibited from attempting to decompile reverse engineer or disassemble the Object Code or in any other way convert the Object Code into a human readable form U S Patent Nos 6 912 495 B2 6 199 037 B1 5 870 405 5 826 222 5 754 974 5 701 390 5 715 365 5 649 050 5 630 011 5 581 656 5 517 511 5 491 772 5 247 579 5 226 084 and 5 195 166 Disclaimer The Company endeavors to achieve the accuracy and completeness of this manual but no warranty of accuracy or reliability is given All the specifications and designs are subject to change without notice due to continuous technology development No part of this manual may be copied modified translated or distributed in any manner without the express written permission of us We do not guarantee for any particular purpose the accuracy validity timeliness legitimacy or completeness of the Third Party products and contents involved in this manual If you have any suggestions or would like to learn more details please visit our website at http www hytera com RF Radiation Information This product must be restricted to operations in an Occupational Controlled RF exposure Environments The product must be only used by users who are fully aware of the hazards of the exposure and who are able to exercise control over their RF exposure to qualify for the high
30. er exposure limits RF Radiation Profile Radio Frequency RF is a frequency of electromagnetic radiation in the range at which radio signals are transmitted RF technology is widely used in communication medicine food processing and other fields It may generate radiation during use RF Radiation Safety In order to ensure user health experts from relevant industries including science engineering medicine and health work with international organizations to develop standards for safe exposure to RF radiation These standards consist of e United States Federal Communications Commission Code of Federal Regulations 47CFR part 2 sub part J e American National Standards Institute ANSI Institute of Electrical and Electronic Engineers IEEE C95 1 1992 e Institute of Electrical and Electronic Engineers IEEE C95 1 1999 e International Commission on Non lonizing Radiation Protection ICNIRP 1998 FCC Regulations Federal Communication Commission FCC requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U S and the manufacturer shall post a RF label on the product to inform users of operational instructions so as to enhance their occupational health against exposure to RF energy Operational Instructions and Training Guidelines To ensure optimal performance and compliance with the occupational controlled environment
31. g charging the LED on the charger will indicate the charging status Charging begins when the charger LED glows red When charging is complete the charger LED glows green See the following table for details Note e To achieve optimal battery performance please charge the battery for 3 hours before initial use e Be sure to read the Safety Information Booklet to get necessary battery safety information Charging Status Standby no load Charging LED The LED flashes red slowly The LED glows red The LED glows orange 90 charged The LED glows green Fully charged The LED flashes red rapidly Failure Assembling Accessories Assembling the Antenna Turn the antenna clockwise to fasten it To remove the antenna rotate it counter clockwise Assembling the Battery 1 Insert the battery into top of the radio See arrow 2 Slightly press the bottom of the battery until a click is heard See arrow 2 To remove the battery turn off the radio first Slide the lock in the direction see arrow to loosen the battery latch then raise the battery latch and remove the battery see arrow Assembling the Audio Accessory 1 Open the accessory jack cover as the arrow shows 2 Align the plug with the accessory jack 3 Tighten the screw on the plug To remove the accessory loosen the screw first Caution Please attach the accessor
32. hannel 1 or Priority Channel 2 the LCD will display the icon Fi or P2 accordingly If you don t want to hear activities on the channel press the programmed Nuisance Temporary Delete key to remove the channel from the scan list temporarily If you want to continue staying on the channel press the programmed Monitor or Squelch Off key during scan stay To exit the scanning process you can select Off from the menu Scan or press the programmed Scan key again Scan Set You can request your dealer to create a scan list for each channel Each list may contain 32 channels at most either digital channel or analog channel is OK 12 You can have the following configuration to the Scan List Go to Scan gt Scan List Adding a Channel To include a new channel into the active scan list Editing Priority Channel To set the selected channel as a priority channel or non priority channel If you are interested in activities on a channel you can set it as a priority channel which will be scanned more frequently than a non priority channel Each scan list may contain two priority channels at most indicates Priority Channel 1 and A indicates Priority Channel 2 Deleting a Channel To remove a channel from the active scan list However the first channel in the list can not be deleted Roam amp This feature allows the radio to communicate between sites in the IP Multi site Connect system If enabled
33. icon appears Your voice and background noise to be transmitted automatically Note If the Alarm with Call To Follow feature is enabled by your dealer you can speak into the microphone without holding the PTT key This mode will be unavailable when the Emergency ID is not sent or 5 Tone Emergency ID is sent Emergency Call Operation Methods for Analog Emergency Alarm None 5 Tone amp HDC1200 Initiating an emergency alarm Press the programmed Emergency On key to send alarm information None HDC1200 The radio displays icon k and text information Sending Alarm with the LED glowing red 5 Tone The radio sends the ID first the icon and text information Sending ID will be displayed and then transmits the emergency alarm the icon and text information Sending Alarm will be displayed with the LED glowing red Note As for None and 5 Tone emergency ID type if Local Emergency Alarm is enabled via the programming software the radio will give an alarm tone Exiting the emergency alarm The emergency alarm initiator exits the Emergency mode in any of the following ways Press the programmed Emergency Off key Turn the radio off Once the Alarm Cycles expire the radio will exit the Emergency mode automatically Hold the PTT key to exit the Emergency mode The radio will transmit the voice on the channel where the radio operates before entering the Emergency mode for
34. ime of the battery Position With this option you can view longitude latitude time date speed altitude and SA satellite information of your radio GPS Text Msg fi If the GPS feature is enabled you can send the GPS text message to your desired contact To install the units please do as follows 1 Select GPS Msg and press the OK key to access the menu Contact List 2 Use the Up Down key to select a desired contact 3 Press the OK key to send the GPS message to the selected contact Time Zone You can choose your time zone to correct the received GPS time We recommend you to set the time zone before your initial use of this feature You can select a desired time zone via the User Define method as per your actual needs The available time zone options are the same as those for the PC For example if the time at your location is 5 45 hours earlier than GMT then you can select GMT 5 45 as your time zone Radio Set You can optimize your radio performance by setting it according to actual needs and your preferences Enter Settings gt Radio Set menu to set the items as introduced below Power Level This menu is to set the TX power level to High or Low High power can extend the coverage enabling you to communicate with farther radios Alternatively you can toggle the power level by pressing the programmed Adjust Power Level key in the home screen On the LCD High power is indic
35. in removers alcohol sprays or oil preparations so as to avoid surface case damage Make sure the product is completely dry before use Optional Accessories The following items are the main optional accessories for the radio and please consult your local dealer for more information of other accessories Vehicle Adapter for Battery Optimizing Li lon Battery Belt Clip Charger Li lon Battery Programming Cable System MCAO05 X Adapter POA53 CHO04L01 1100mAh BL1103 USB Port PC45 Charger CHV09 oU ews Covert Vest Plastic Carrying Case Remote Earbud Remote Swivel Earset Remote C Earset Remote Earset with transparent NCNOO9 with Clip PCNO05 ESN14 EHN20 EHN21 acoustic tube EAN22 OO OD nae ot 3 wire Surveillance Earpiece Digital Covert Wireless Earpiece Digital Covert Wireless 3 Wire Surveillance Earpiece z with Transparent Acoustic Tube with Transparent Acoustic Wireless Earpiece Wireless Finger with Inductive Neckloop and Earpiece with Inductive Remote Controller EWNO7 Neckloop EWN08 BT Beige CANIS Tube beige EAN21 EHW02 PTT POA47 Caution Use the accessories specified by the Company only If not Hytera shall not be liable for any losses or damages arising out of use of unauthorized accessories 22 Appendix Input Method You can enter aliases numbers or messages using the keypad The radio supports these input methods Chinese Pinyin simplified English and Number Chinese Pinyin
36. isable the Monitor feature quickly To enable or disable the Squelch feature quickly To quickly return to the previous menu or home screen To enable or disable the Scan feature quickly No 15 16 17 18 19 20 21 22 23 24 25 26 27 Shortcut Key Nuisance Temporary Delete Adjust Squelch Level A Battery Power Indicator Man Down Scrambler Encrypt N Lone Worker One Touch Call 1 5 Status List Telemetry Button 1 3 An DTMF Keypad Phone List Roam fn Priority Interrupt Function To temporarily ignore unwanted channel activity To access the menu Squelch Level quickly To check the battery strength promptly To activate or deactivate the Man Down function To enable or disable the Scrambler or Encryption feature quickly To enable or disable Lone Worker feature quickly To make appropriate services quickly To access the menu Status List quickly for 5 Tone To monitor remote equipment To enable or disable the DTMF keypad quickly With the DTMF keypad you can enter a number via the keypad to make a phone call To access the menu Phone List quickly To enable or disable the Roam feature quickly To terminate the ongoing activity on the current channel so as to initiate a new call or data service No Shortcut Key 28 VOX 29 BT 30 GPS Report 31 Option Board 32 Morse Code Receiving
37. l key Telemetry fn This feature allows you to remotely supervise the device connected with a radio With this feature you can control the device and view its status in the case that you are away from the device The method for supervising the device is programmable by your dealer The available methods are To supervise the device via the radio If a device is connected with a radio you can use another radio to supervise the device All the radios involved should be configured with the Telemetry feature For example the dealer enables the Telemetry feature for both Radio A and Radio B and assigns the Telemetry feature to the SK1 key on Radio A To supervise the Device C connect it with Radio B and press the SK1 key on Radio A To supervise the device via a third party software If the Telemetry feature is enabled for the radio by your dealer you can supervise the device connected with the radio via third party software Priority Interrupt Manual Priority Interrupt You can have the priority of interruption by pressing the programmed Priority Interrupt key By pressing this key you can terminate the ongoing activity a call Call Hold Time or remote monitoring on the current channel so as to initiate a new call or data service Call Hold Time the duration the radio stays at in call status after the end of the call There are two types Group Call Hold Time and Private Call Hold Time Within the time you can hold
38. ll 1 One Touch Call 5 keys to send the 5 Tone signaling During encoding the radio sounds a side tone the LED glows red and the LCD displays the call icon PA Sa with contact information above it If Auto Reset is enabled by your dealer your radio will enter the Auto Reset mode after successful encoding with the LED glowing orange until the Auto Reset Time expires Decoding Your radio can automatically decode the 2 Tone sig naling when receiving any matched one During decoding the LED glows green After suc cessful decoding the LCD displays the call icon and the call type selective call alert call w voice alert call below the icon according the decoding type If Auto Reset is enabled by your dealer your radio will enter the Auto Reset mode with the LED glowing orange until the Auto Reset Time expires The radio cannot enter the Auto Reset mode if it is an alert call Hytera is the trademark or registered trademark of Hytera Communications Corp Ltd 2013 Hytera Corp Ltd All Rights Reserved Address HYT Tower Hi Tech Industrial Park North Beihuan RD Nanshan District Shenzhen China Postcode 518057 http www hytera com Hytera 18 fe IA E AR 6 BR By BY A he Bk E AR i 2013 Hytera Corp Ltd KRM ATA te HE RHI Th Pa LU EX ALA A 1891085 HB t 518057 Ak 42 400 830 7020 http www hytera com
39. n all call which will interrupt the ongoing call Emer Alarm In case of an emergency you can use the feature to ask for help from your companion or control center The emergency alarm has the highest priority You can make emergency operation even when your radio is transmitting or receiving Caution Any of the two situations below will occur when the emergency alarm initiator exits the Emergency mode e The initiator presses the programmed Emergency Off key or Power Off key to exit the Emergency mode e When exiting this mode in other ways as introduced below the radio can only 15 exit the emergency alarm on the current channel temporarily and will continue to give the alarm when it returns to this channel moreover when the radio switches to another channel which is also designed with the Emergency feature it will give an alarm on that channel too The Emergency feature is enabled by your dealer Before use you may need to know the following concepts Emergency Type Different types will have different indications Eren Description ype In Emergency mode the radio will Siren Only sound shrill alarm tone and display icon Regular In Emergency mode the radio will give audible and visible indication In Emergency mode the radio won t Silent give any audible or visible indication In Emergency mode the radio won t silent with give any audible or visible indication Voice but will receive voice
40. ng contents 2 When the format consists of fields for variable information you need to fill in such fields by manual entry or menu operation When the format consists of fixed codes only you do not have to edit such fields or save such data 3 Press the PTT key or the programmed One Touch Call 1 One Touch Call 5 keys to send the 5 Tone signaling During encoding the radio sounds a side tone the LED glows red and the LCD displays the contact information or Five Tone Call and an appropriate call icon Private Call aL Group Call If Auto Reset is enabled by your dealer your radio will enter the Auto Reset mode after successful encoding with the LED glowing orange until the Auto Reset Time expires Decoding Your radio can automatically decode the 5 Tone signaling when receiving any matched one During decoding the LED glows green After successful decoding the LCD displays the contact information or Five Tone Call an appropriate call icon Private Call 4 Group Call and the decoded status message If Auto Reset is enabled by your dealer your radio will enter the Auto Reset mode with the LED glowing orange until the Auto Reset Time expires 2 Tone With this signaling the radio can transmit and receive 2 Tone calls Encoding 1 Request your dealer to configure the correct format and type for the encoding contents 2 Press the PTT key or the programmed One Touch Ca
41. old the programmed Monitor Momentary key to enable the feature and the radio displays icon To disable the feature release this key ak ll Yue Squelch Off If the Squelch Off feature is enabled the speaker will keep unmuted no matter whether carrier is present Press the programmed Squelch Off key to enable the feature Then the radio displays the icon nd and sounds background noise To disable the feature press this key again Hold the programmed Squelch Off Momentary key to enable the feature Then the radio displays the icon and sounds background noise To disable the feature release this key Adjust Squelch Level amp This feature allows you to adjust the squelch threshold required for the radio to be unmuted Generally the higher squelch level requires stronger signal for the radio to be unmuted If the squelch level is set to Open the speaker will keep unmuted irrespective of the satisfaction of decoding conditions Press the programmed Adjust Squelch Level key to switch among Tight Normal and Open You can also switch among these levels via the menu Settings gt Squelch Level When switching from Tight to Open a low pitched tone sounds followed by the background noise from Open to Normal a high pitched tone sounds with the background noise fading from Normal to Tight a high pitched tone sounds One Touch Call You can
42. on again Covert Mode When Covert Mode is enabled the radio will close any visible indications on it such as the LED Vibration etc which are set by your dealer This feature is mainly used in special missions To enable or disable the Covert mode you can press the programmed Covert Mode key or enter the menu Settings gt Radio Set gt Covert Mode AL a r a Scramble amp 9 Encrypt hn The Scramble feature can encrypt your audio signals to prevent eavesdropping Thus privacy of your communication is guaranteed This Encrypt feature can encrypt your audio signals to prevent eavesdropping Thus privacy of your communication is guaranteed On an analog channel go to Main Menu gt Set tings gt Radio Set gt Scramble and select En able or Disable on a digital channel go to Main Menu gt Settings gt Radio Set gt Encrypt and select Enable or Disable Press the programmed Scramble Encrypt key to enable Scramble or Encrypt on the current chan nel a high pitched tone sounds press the key again to disable the feature a low pitched tone sounds If the Scramble Encrypt feature is enabled for a channel via the programming software switch to the channel to enable the feature or exit the channel to disable the feature Setting of Encryption Key The radio can contain up to 30 encryption keys You can create an encryption key 18 by defining its key
43. on LCD to alert you In addition the earliest message will be overwritten by the latest one automatically For each message you can choose to perform any of these operations Resend Forward View Details and Delete To delete all messages in the OutBox select Message gt Outbox gt Delete All Drafts The Drafts can save up to 20 draft messages When the Drafts is full the earliest message will be overwritten by the latest one automatically For each message you can choose to perform any of these operations Send Save and Delete After the message in the Drafts is sent it will be removed from the Drafts and be saved to the Outbox To delete all messages in the Drafts select Message gt Drafts gt Delete All Work Orders This feature is programmed by the dealer It enables the radio to receive work orders from the third party and reply it with the current work status Please contact your dealer for details Call Logs The radio can save up to 10 private call entries in the Outgoing Incoming Missed list respectively When the Outgoing Incoming Missed list is full the earliest entry will be overwritten by latest one automatically You can press the Menu key to enter Main Menu gt Call Logs menu or enter the Call Logs menu directly via the shortcut key for Call Logs After accessing a list and selecting an entry you can perform any of these operations hold the PTT key
44. plays the icon C 3 And when a call is received the icon ce appears 4 If the preset Voice Cycles expire you can hold the PTT key to make the emergency call again the radio displays the icon with the LED glowing red After the emergency call is transmitted release the PTT key to receive the radio displays the icon with the LED flashing orange rapidly And when a call is received the icon Le appears for HDC1200 only Exiting the emergency alarm The emergency alarm initiator exits the Emergency mode in any of the following ways Press the programmed Emergency Off key Turn the radio off 16 After the preset Alarm Cycles and Voice Cycles expire the radio will exit the Emergency mode automatically for None and 5 Tone only The emergency alarm receiving party exits the emergency alarm in any of the following ways None When the alarm is received the receiving party can press any key to exit the emergency alert When the alarm initiator exits the Emergency mode or when the Alarm Cycles expires the receiving radio will exit the emergency alert automatically 5 Tone When an alarm is received the receiving party can press any key to exit the emergency alert HDC1200 When an alarm is received the receiving party can exit the emergency alert by pressing the TK key within 2s after pressing the Back key or switching the channel or powering off the radio Call Only HDC1200 Initiating an eme
45. preset time period to call back If you do not respond to it your radio will provide appropriate indications The indication information is the same as that for the private call Time out Timer TOT TOT aims to prevent any user from occupying a channel for an extended period If the preset time expires the radio will automatically terminate transmission and keep beeping To stop beeping please release the PTT key You must wait for a certain time preset by your dealer to initiate another transmission If the pre alert function is set by your dealer your radio will alert you to the TOT expiration in advance Note This feature is null in Emergency mode Busy Channel Lockout If enabled via the programming software this feature can prevent your radio interfering with other transmitting terminals on the same channel If you hold the PTT key while the channel is in use your radio will Keep beeping and display Channel Busy alerting you to transmission prohibition When the channel is free you can press and hold the PTT key to transmit Pseudo Trunking hn This feature can be enabled via the programming software If your radio operates on a channel with this feature enabled and one time slot is already occupied it can transmit and receive on the other free slot Functions and Operations This manual introduces all features of this radio You can learn its available functions from your dealer Home Screen
46. radio Emergency Call Initiating an emergency alarm 1 Press the programmed Emergency On key to go to the Emergency Channel and the radio displays the icon 2 Hold the PTT key the icon appears with the LED glowing red and speak into the microphone to transmit the emergency call Note If your dealer has enabled the Alarm with Call To Follow you can speak into the microphone without pressing the PTT key when the icon appears If the preset Voice Cycles expire you can hold the PTT key to make the emergency call again 3 And when a call is received the icon ce appears When the icon appears you can hold the PTT key the icon a gt appears with the LED glowing red to speak into the microphone Exiting the emergency alarm To exit the Emergency mode press the programmed Emergency Off key or power off the radio The emergency receiving party cannot exit the emergency alert until the initiator exits Note Your dealer may set the number of polite retries and impolite retries number of voice cycles duration of each transmission and TX interval Man Down With the feature enabled the radio will give a tone if it tilts to a certain gradient defined by the dealer or stay motionless until the preset period expires And the radio will enter the Emergency mode automatically if you don t make proper operation on it within the period when the tone continues To exit the Emergency mode please move it or place
47. rent using environments as well as making the heard voice clear You can enable or disable the LQO feature by pressing the programmed LQO key or via the menu Settings gt Radio Set gt LQO Rent Your dealer can rent the radio to you If you are renting the radio when the rental expires you are not allowed to go on using the radio You can check the remaining rental time of the radio via the menu Settings gt Radio Set gt Rent gt Rent Query If the Rent Pre Alert feature is enabled the radio will give a tone periodically to remind you how much time is left for the rental Scan The Scan feature allows you to listen to communication activities on other channels so that you can keep a close track of your team members Operation To enable the feature you can select On from the menu Scan press the programmed Scan key in the home screen or switch to a channel for which the Auto Scan feature is enabled via the programming software After the feature is enabled your radio will scan according to the scan list set for the channel on which scanning starts The scanning process is as follows During scanning the LCD displays the icon lt gt and the LED flashes orange slowly When activities are detected on a channel the radio will stay on the channel to receive current activities If your radio stays on a non priority channel the LCD will display the icon lt 2 if on Priority C
48. rgency alarm Press the programmed Emergency On key to go to the Emergency Channel and the radio displays the icon f If the Alarm with Call to Follow feature is enabled you can speak into the microphone to make an emergency call when the radio displays the icon c And when a call is received the icon ce appears If the preset Voice Cycles expire you can hold the PTT key to make the emergency call again the radio displays the icon with the LED glowing red After the emergency call is transmitted release the PTT key to receive the radio displays the icon 17 with the LED flashing orange rapidly And when a call is received the icon Le appears Exiting the emergency alarm To exit the Emergency mode press the programmed Emergency Off key or power off the radio The emergency receiving party cannot exit the emergency alert until the initiator exits Note Your dealer may set the number of alarm cycles and alarm duration None 5 Tone number of polite retries and impolite retries HDC1200 number of voice cycles duration of each transmission and TX interval Operation Method for Digital Emergency fn Emergency Alarm Initiating an emergency alarm Press the programmed Emergency On key to send alarm information The radio displays icon and text information Sending Alarm with LED glowing red Exiting the emergency alarm The emergency alarm initiator exits the Emergency mode in any of the following
49. rther development with the radio For example use the radio to send a message to some other equipment Programming You can modify the frequency color code and slot information for the current channel Frequency You can set the TX RX frequency within the required range Color Code It is used to identify a system Radios to communicate with each other must be assigned with the same color code Value range an integer between 0 and 15 Slot fn You can select the slot for calls and data transmission Device Info With this option you can view basic information of your radio including Radio Alias Serial Number Model Name Frequency Range Firmware Version Radio Data Version Boot Loader Version etc Go to Main Menu gt Settings gt Device Info Battery Power Indicator This feature allows you to know the current battery strength Hold the programmed Battery Power Indicator key and the radio will give a specific indication to represent the current battery strength Release this key to exit indication Battery Power Battery Icon Power LED glows green oo High LED glows orange m Medium Red LED glows E Low LED glows red and the low battery alert Insufficient sounds 20 Troubleshooting Phenomena Analysis Solutio 00000 The battery may be improperly installed Remove the battery and attach it again The battery may run out Recharge or replace the battery Power on failure The bat
50. tery may suffer from poor contact Clean the battery contacts If the problem can caused by dirtied or damaged battery not be solved contact your dealer or authorized contacts service center for inspection and repair The battery power may be too low Recharge or replace the battery During receiving The volume may be set to a low level Increase the volume i ane inst ie EE ee oes 00000 Power off the radio and re install the antenna discontinuous or Installed totally inactive Clean surface of the speaker If the problem can The speaker may be blocked or damaged not be solved contact your dealer or authorized service center for inspection and repair The frequency or signaling may be Set your TX RX frequency and signaling to the oucnn inconsistent with that of other members same as that of other members communicate with The channel type digital analog may be Make sure all members are on the same digital other members set inconsistently analog channel hier tas Be 190 tale 00000 Ine group Move towards other members Irrelevant You may be interrupted by radios using the Change the frequency or adjust the squelch communication or same frequency level noise is heard on the Set signaling for all member radios to avoid channel The radio may be set with no signaling interference at the same frequency hie i 06090 TAL AWAY TOM GINE Move towards other members You may be at an unfavorable position The noise is too For exampl
51. the PTT key to directly call back Auto Priority Interrupt The Auto Priority Interrupt is enabled by the dealer It is designed to ensure the priority given to the specified services Such services will trigger the interruption automatically Emergency Priority Interrupt This function is designed for users to report an emergency alarm in time Carrying this function would interrupt the active call on the current channel To carry out the function any of the following ways is available Press the programmed Emergency On key Hold the PTT key in Emergency mode Auto Emergency Call Call Back Priority Interrupt With the feature enabled you can hold the PTT key to interrupt a receiving call and call back For example user A is receiving a call from user B This 14 function allows user A to interrupt the call and talk back to user B by pressing the PTT key Message Priority Interrupt During a call on the channel this function allows you to send a short message which will also interrupt the call Radio Disable Priority Interrupt During a call on the channel this function allows you to send a radio disabling command which will also interrupt the call The disabled radio can be monitored remotely but other features will be invalid It can only be revived by reprogramming through the CPS or through the revive command All Call Priority Interrupt During a call on the channel this function allows you to transmit a
52. the Up Down key to select the group call contact you want to call 3 Hold the PTT key to transmit the group call Through manual input 1 Go to Contact gt Manual Dial 2 Input a group call contact you want to call 3 Hold the PTT key to transmit the call Note e If your radio supports both Private Call Manual Dial and Group Call Manual Dial you can switch between them by pressing The LCD will display the appropriate ID e If the Default Numeric Key Selection feature is enabled by your dealer you can enter a group call number in the home screen and then hold the PTT key to transmit the call However if the DTMF keypad is enabled the number entered in the home screen is a phone number You can dial the group call number through the menu Manual Dial only Receiving and Responding to a Call When a group call is received your radio will display the icon n You may hold the PTT key within the preset time period to call back All Call Initiating a Call Two methods are available for transmitting an all call transmitting a call to the preset contact transmitting a call through Contact List They are the same as those in the foregoing Transmitting a Group Call When transmitting an all call the icon AO will appear Note You can transmit an all call only when it is enabled by your dealer Receiving a Call When an all call is received your radio will display the icon p
53. to initiate a call add it to Contact List or delete it To delete all entries in the Outgoing Incoming Missed list at a time select Call Logs gt Outgoing Incoming Missed gt Delete All VOX This feature allows you to transmit the voice with no need to press PTT When VOX is enabled the icon will appear Enabling or disabling the VOX Feature Press the programmed VOX key to toggle the VOX function on or off You can also toggle it on or off via the Settings gt Radio Set gt VOX menu Adjusting the VOX Gain Level You can set the sensitivity of microphone transmission via the Settings gt Radio Set gt VOX gt Gain Level menu The higher gain value indicates lower sensitivity Internal the VOX transmission sensitivity of internal microphone External the VOX transmission sensitivity of external microphone Caution Please adjust the VOX Gain Level properly on your actual requirements MIC AGC This feature can be enabled via the programming software Your radio will control the audio gain during transmission providing improved audio with appropriate volume for the receiving radio Audio Feedback Suppression This feature can be enabled via the programming software It can weaken the noise caused by short distance communication so as to improve the voice quality LQO This feature enables the radio to adjust the audio quality automatically in standby mode to fit diffe
54. uffer Dial Enter the DTMF keypad mode The following methods are available to enter this mode Go to Main Menu gt Phone gt Manual Dial to enter the DTMF keypad mode Enable the DTMF keypad by pressing DTMF Keypad key or going to Phone gt DTMF Keypad menu Then the number entered via the numeric keypad in the home screen is the DTMF code Access the phone system Enter the access code via the keypad and then press the PTT key The radio beeps and displays the dialing information When the phone system is accessed successfully the radio goes to the DTMF keypad mode again 2 Make the phone call Live Dial Hold the PTT key and enter the phone number via the keypad Release the PTT key after the complete number is entered Buffer Dial Enter the phone number via the keypad and then hold the PTT key Note Whichever dialing method you take now you can press the Back key and select the contact via Phone gt Phone List menu and then press the PTT key 3 After the call is established you can hold the PTT key to talk and release it to listen To end the call you can send the de access code the input method is the same as that for the access code to exit the phone system If the phone is hung up the call will be ended and the phone system will be exited too Receiving a Call Upon the receipt of a phone call the radio will display icon ASS or nh You may hold the PTT key within the
55. vice may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Note Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment EU Regulatory Conformance As certified by the qualified laboratory the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999 5 EC Please note that the above information is applicable to EU countries only Contents Documentation Conventions Instructional cons Notational Conventions Key Operation Checking Items in the Package Product Introduction Product Controls Programmable Keys Before USe Charging the Battery Assembling Accessories Status Indication LCD Icon LED Indicator Menu Navigation Basic Operations
56. y properly otherwise waterproof performance of the radio may get affected Status Indication LCD Icon IconName 1600 Radio Status __ Direct Mode Under this mode radios communicate with each other directly Repeater Mode Under this mode radios communicate with each other via a repeater More bars indicate RSSI Icon Y Y Ya Til Till better signal strength New message unread Message message Icon E lt ie radio is scanning Scanning pauses on a non priority Scan Icon channel FL Pronty channel 1 Priorit Channel 1 o i Priority Channel 2 E vepe prte Low Tx power for the Tx Power current channel Icon A High Tx power for the current channel Operation Mode Icon Battery More bars indicate Power icon O ED m CH Monitor feature is active Monitor Icon IconName 1600 Radio Status en O 0 10000 o Icon unmuted The Emergency mode other than secret emergency is active or an emergency alarm is received eer a e tae Icon connected The GPS feature is oe active and valid GPS data is received The GPS feature is ative but no valid GPS data is received Sara The Scrambler E EV Encrypt feature is ncrypt Icon active Icon call s DTMF The DTMF keypad is One or more new Work Order ie work orders are received Emergency Icon GPS Icon LED Indicator The top LED will help you easily identify the current radio status LED Indic
57. your radio supports both Private Call Manual Dial and Group Call Manual Dial you can switch between them by pressing The LCD will display the appropriate ID e If the Default Numeric Key Selection feature is enabled by your dealer you can enter a private call number in the home screen and then hold the PTT key to transmit the private call However if the DTMF keypad is enabled the number entered in the home screen is a phone number You can dial the phone number through the menu Manual Dial only Receiving and Responding to a Call When a private call is received your radio will display the icon A You may hold the PTT key within the preset time period to call back If you do not respond to it your radio will provide appropriate indications Note e If the Display Missed Call feature is enabled by your dealer your radio will display the missed call icons and Q e If the Display Missed Call feature is not enabled your radio will display the missed call icon amp only Group Call fr Initiating a Call You may transmit a group call through any of the following methods When the radio transmits a group call the icon A will appear Transmitting a call to the preset contact In the home screen hold the PTT key to transmit a group call to the group call contact preset for the current channel Transmitting a call through Contact List 1 Go to Contact gt Contact List 2 Use
Download Pdf Manuals
Related Search