SPC User Manual
Contents
1. SPC User Manual 7 Ampere SPC 14 Ampere SPC Accurate climate control Accurate climate control Adjustable minimum and maximum engine RPM Max current 14A 16A fused 6 feet cable with temperature sensor included Easy installation and usage Adjustable minimum and maximum engine RPM Max current 7A 8A fused 6 feet cable with temperature sensor included Easy installation and usage IP54 protection approved damp proof IP54 protection approved damp proof 28 Ampere SPC Accurate climate control 6 feet cable with temperature sensor included Adjustable minimum and maximum E Easy installation and usage engine RPM Max current 28A 32A fused IP54 protection approved damp proof Installation PLUG and PLAY Only authorized personnel are allowed to install the SPC and to take care of technical malfunctions After receiving the complete SPC package please check for damage caused by transport and check the contents of the package Before installation please make sure the voltage and frequency settings are correct 110V 60Hz or 230V 50Hz Never install the SPC near wet conditions and make sure the power is switched off Main switch on AUTO The SPC is now fully automatic Depending on your configuration the fans are controlled automatically After switching on the SPC the fans will always run at full speed for a few seconds Main switch2. ncy 50 60 Hz Dynamic range 2x 0 5 16 0 Ampere Temperature sensor 4K7 at 77 F Input 110 V Bandwidth range 33 8 till 44 6 F ATTENTION Our SPC s are being programmed for most used fans However switching the minimal speed down is possible For this purpose turn the cal Min potentiometer under the socket template on the left hand side Turn left for minus and right for plus Turn down the speed in such a manner that the fan will always keep running TURNING DOWN ANY MORE WILL INCREASE THE POSSIBILITY OF HUMMING FANS If the SPC is being switched off through the switch 0 position and then is restarted first put the switch on 100 and only afterwards on auto This is being recommended in order to protect the connected fans
3. on 0 The SPC is turned OFF Main switch on 100 In case of automatic malfunction use this option in order to run the fans at full speed See backside of this manual for a detailed picture Switch 1 Set minimal ventilation level f e 20 Switch 2 Set maximum ventilation level f e 100 Switch 3 Set ventilation bandwidth Irrespective to the minimum and maximum settings getting below 10 bandwidth is not possible f e 2 C Switch 4 Set desired temperature When the air temperature exceeds your desired temperature the fans will automatically adjust their speed PC 7 Ampere picture Main Switch omni re Power outlet The system uses an 8A slow fuse Technical specifications 7 Ampere Adjustable Capacity max 8 Ampere Frequency 50 60 Hz Dynamic range 0 5 8 0 Ampere Temperature sensor 4K7 at 77 F Input 110 V Bandwidth range 33 8 till 44 6 F PC 14 Ampere picture Main Switch The system uses a 16A slow fuse a Power outlet Technical specifications 14 Ampere Adjustable Capacity max 16 Ampere Frequency 50 60 Hz Dynamic range 0 5 16 0 Ampere Temperature sensor AK7 at 77 F Input 110 V Bandwidth range 33 8 till 44 6 F PC 28 Ampere picture Fuse Main Switch The system uses 2x a 16A slow fuse Power outlet Technical specifications 28 Ampere Adjustable Capacity 2x max 16 Ampere Freque
Download Pdf Manuals
Related Search