Home

XPS-RC User Manual - Newport Corporation

1. XPS RC XPS Remote Control RoHS E Compliant COMPATIBLE QE USER S MANUAL Nevvport Experience Solutions FIRMWARE V 1 e 0 e 0 For Motion Think Newport XPS RC XPS Remote Control Warranty Newport Corporation warrants that this product will be free from defects in material and workmanship and will comply with Newport s published specifications at the time of sale for a period of one year from date of shipment If found to be defective during the warranty period the product will either be repaired or replaced at Newport s option To exercise this warranty write or call your local Newport office or representative or contact Newport headquarters in Irvine California You will be given prompt assistance and return instructions Send the product freight prepaid to the indicated service facility Repairs will be made and the instrument returned freight prepaid Repaired products are warranted for the remainder of the original warranty period or 90 days whichever occurs last Limitation of Warranty The above warranties do not apply to products which have been repaired or modified without Newport s written approval or products subjected to unusual physical thermal or electrical stress improper installation misuse abuse accident or negligence in use storage transportation or handling THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF
2. amp Returns Tel 800 222 6440 e mail service newport com Europe MICRO CONTROLE Spectra Physics S A S 9 rue du Bois Sauvage 91055 Evry CEDEX France Sales amp Technical Support Tel 33 0 1 60 91 68 68 e mail france newport com Service amp Returns Tel 33 0 2 38 40 51 55
3. Control The Action button JOG ENABLE on the screen shot proposes an action depending on the current group status For example if the current group status is NOT INIT it suggests to initialize the group INIT Refer to the group state diagrams in the XPS programmer s manual for detailed information The possible actions are INIT HOME JOG ENABLE and JOG DISABLE The GO TO INCR and INCR buttons are only enabled when the current group status is READY During a motion all buttons are disabled Changes to the displacement and target positions get only applied when the position value does not exceed the XPS RC maximum manageable position value 10 2 2147 483648 Furthermore changes to the target position get only applied when the target position value stays in the zone limited by the current selected positioner minimum and maximum travel limits If the new target position exceeds one of these limits it will be automatically limited to the maximum minimum addressable position 4 7 MOVE SETTINGS Screen Selected positioner name Press to modify Move velocity GO Newport XPSPAC Remote Control numerical input screen Wa Press to modify Move acceleration N numerical input screen 900008 Return to MOVE screen In the MOVE SETTINGS screen the current move velocity and acceleration are displayed To change any of them press the desired numeric value and enter the new value through the n
4. MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE NEWPORT CORPORATION SHALL NOT BE LIABLE FOR ANY INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE PURCHASE OR USE OF ITS PRODUCTS First printing 2005 Copyright 2014 by Newport Corporation Irvine CA All rights reserved No part of this manual may be reproduced or copied without the prior written approval of Newport Corporation This manual is provided for information only and product specifications are subject to change without notice Any change will be reflected in future printings Newport EDH0207En1030 06 14 11 Experience Solutions XPS RC XPS Remote Control Table of Contents E ii EU Declaration of iv Prola NRI T I IRR V Confidentiality amp Proprietary V Sales Tech Support amp Service vi Service Information oquekE Ga ea puru Tbv Eo bo Eau EUr FERRO PEPPER TEE paz UID CE URGE vi Newport Corporation RMA vi Packar ene vi 1 0 Introduction 1 nnns 1 2 0 Startup and Error Recovery 2 3 0 Remote Control Screen 3 4
5. 0 XPS RC SCEeelS 3 4 1 Initialization Screen 3 4 2 POSITION SCPE CM 4 SES NBI CR CCE 5 AA JOG SETTINGS SCPC 2035777259 cte atouts 5 AS Numeric 6 do MOVE eG 6 4 7 MOVE SET TINGS 1 do SCPOOll conati 8 4 9 Detailed Status 8 MENU SCP CCN 9 AIT IP WTS 9 5 0 Maintenance and Service 10 5 1 Enclosure Cleaning 10 10 SOVICO FOTI 11 CY Newport Experience Solutions iii EDH0207En1030 06 14 XPS RC XPS Remote Control EU Declaration of Conformity NASA A AQ LSS RSI LISS 7 XPS Year mark affixed 2011 EC Declaration of Conformity The manufacturer MICRO CONTROLE Spectra Physics rue Jules Guesde ZI Bois de l Epine BP189 F 91006 Evry FRANCE Hereby declares that the product Description XPS Function Universal High Performance Motion Controller Driver Type of equipment Electrical equipment for measurement control and laboratory use complies with all the
6. H0207En1030 06 14 XPS Remote Control Sales Tech Support amp Service North America amp Asia Newport Corporation 1791 Deere Ave Irvine CA 92606 USA Sales Tel 800 222 6440 e mail sales newport com Technical Support Tel 800 222 6440 e mail tech newport com Service RMAs amp Returns Tel 800 222 6440 e mail rma service newport com Service Information Europe MICRO CONTROLE Spectra Physics S A S 1 rue Jules Guesde Bat B ZI Bois de BP189 91006 Evry Cedex France Sales amp Technical Support Tel 33 0 1 60 91 68 68 e mail france newport fr com Sales Germany Tel 49 0 61 51 708 0 e mail germany newport com Sales UK Tel 44 0 1635 521757 e mail uk newport com Technical Support e mail tech_europe newport com Service amp Returns Tel 33 0 2 38 40 51 55 The user should not attempt any maintenance or service of the XPS RC Remote Control beyond the procedures outlined in this manual Any problem that cannot be resolved should be referred to Newport Corporation When calling Newport regarding a problem please provide the Tech Support representative with the following information e Your contact information e System serial number or original order number e Description of problem e Environment in which the system is used e State of the system before the problem e Frequency and repeatability of problem e Can the product conti
7. PS Remote Control Changes to the jog velocity get only applied when the following conditions are true e The jog velocity does not exceed the XPS RC maximum manageable velocity value 0 001 22 4294967 296 e The jog velocity does not exceed the current selected positioner maxi mum velocity e The jog velocity does not exceed half of the current selected positioner maximum acceleration to assure jog acceleration time from 0 to jog velocity lt 0 5 5 4 5 Numeric Input Screen This screen is used for setting new values like position velocity or acceleration Delete last digit QAD Newport XPS RC Remote Control Erase Enter and return all digits to previous screen 4 6 MOVE Screen When the user presses the MOVE button in the POSITION screen the following screen appears Selected Press to modify target position 71 positioner name numerical input screen Press to modify target Absolute move position 2 button move GO Newport XNS RC Remote Control numerical to target 1 input screen Press to modify relative displacement numerical input screen Absolute move button move to target 2 ODD P Relative move N v Relative move button negative button positive displacement e displacement Go to MOVE Current group Action SETTING screen status button CY Newport EDH0207En1030 06 14 6 Experience Solutions XPS RC XPS Remote Control CY Newport XPS RC Remote
8. expressly permitted Newport claims and reserves all rights and benefits afforded under law in the Programs provided by Newport Corporation Newport shall retain full ownership of Intellectual Property Rights in and to all development process align or assembly technologies developed and other derivative work that may be developed by Newport Customer shall not challenge or cause any third party to challenge the rights of Newport Preservation of Secrecy and Confidentiality and Restrictions to Access Customer shall protect the Newport Programs and Related Materials as trade secrets of Newport and shall devote its best efforts to ensure that all its personnel protect the Newport Programs as trade secrets of Newport Corporation Customer shall not at any time disclose Newport s trade secrets to any other person firm organization or employee that does not need consistent with Customer s right of use hereunder to obtain access to the Newport Programs and Related Materials These restrictions shall not apply to information 1 generally known to the public or obtainable from public sources 2 readily apparent from the keyboard operations visual display or output reports of the Programs 3 previously in the possession of Customer or subsequently developed or acquired without reliance on the Newport Programs or 4 approved by Newport for release without restriction CY Newport Experience Solutions V EDH0207En1030 06 14 ED
9. limited to positions between 2147 483648 and 2147 483648 If the position to display is outside this range the displayed value will be one of these limits Newport EDH0207En1030 06 14 4 Experience Solutions XPS RC XPS Remote Control 4 3 JOG Screen When the user presses the JOG button in the POSITION screen the following screen appears Jog in positive direction Newport XPS RC Remote Control Jog in negative direction x AN Go to Current group Action JOG SETTINGS screen status button The Action button JOG ENABLE on the screen shot proposes an action depending on the current group status For example if the current group status is NOT INIT it suggests to initialize the group INIT Refer to the group state diagrams in the XPS programmer s manual for detailed information The possible actions are INIT HOME JOG ENABLE and JOG DISABLE The JOG and JOG buttons are only enabled when the current group status is JOG 4 4 JOG SETTINGS Screen Selected positioner name Press to modify Jog velocity Q Newport XPSPAC Remote Control numerical input screen Return to JOG screen In the JOG SETTINGS screen the current jog velocity is displayed To change it press the numeric value and enter the new value through the numerical input screen When done press OK to return to the JOG screen CY Newport Experience Solutions 5 EDH0207En1030 06 14 XPS RC X
10. mation regarding factory service contact Newport Corporation or your Newport representative Please have the following information available e Instrument model number on front panel e Instrument serial number on rear panel or original order number e Description of the problem If the instrument is to be returned to Newport Corporation you will be given a Return Number which you should reference in your shipping documents Complete a copy of the Service Form as represented on the next page and include it with your shipment CY Newport EDH0207En1030 06 14 10 Experience Solutions XPS RC XPS Remote Control Service Form Your Local Representative Tel Fax Name Return authorization Please obtain prior to return of item Company Address Date Country Phone Number P O Number Fax Number Item s Being Returned Model Serial Description Reasons of return of goods please list any specific problems CY Newport Experience Solutions 1 1 EDH0207En1030 06 14 Newport Experience Solutions Visit Newport Online at www newport c om North America amp Asia Newport Corporation 1791 Deere Ave Irvine CA 92606 USA Sales Tel 800 222 6440 e mail sales newport com Technical Support Tel 800 222 6440 e mail tech newport com Service RMAs
11. mote Control Remote Control Screen Tree Initialization IP view screen screen Bad firmware Position Menu screen screen screen Status Move screen screen Detail status Move setting i Numerical screen Jog setting screen input screen screen XPS RC Screens 4 1 Initialization Screen When the remote control is connected to the XPS controller the following screen appears until the XPS starts communication with the XPS RC QD Newport XPS RC Remote Control XPS RC firmware revision number CY Newport Experience Solutions 3 EDH0207En1030 06 14 XPS RC XPS Remote Control Once the XPS has checked the firmware compatibility of the connected XPS RC the following screen appears in case the XPS RC s firmware is not compatible with the firmware of the XPS controller CY Newport XPS RC Remote Control XPS RC firmware RC module revision number XPS firmware revision 4 2 POSITION Screen The POSITION screen is the default screen that appears when both firmware revisions are compatible The displayed values are the current positions Depending on the configuration of the XPS controller the number of displayed positions varies from 1 to 8 Selected Positioner positioner name has an error Selected positioner GO Newport XNS RC Remote Control position Go to Go to Go to STATUS screen MOVE screen JOG screen The XPS RC remote control position display is
12. nue to operate with this problem e Can you identify anything that may have caused the problem Newport Corporation RMA Procedures Any XPS RC Remote Control being returned to Newport must have been assigned an RMA number by Newport Assignment of the RMA requires the item serial number Packaging XPS RC Remote Control being returned under an RMA must be securely packaged for shipment If possible reuse the original factory packaging vi QW Newport Experience Solutions XPS RC XPS Remote Control XPS RC XPS Remote Control m Introduction XPS RC Remote Control is a wired remote graphic control panel for the XPS controller enabling computer independent motion and basic system diag nostic It has a 3 8 touch screen interface and 6 permanent push buttons The functions of the 6 permanent push buttons are the following Kill all Reset all groups of positioners and put them to NOT INIT state Kill current group reset the current group and put it to NOT INIT state Change selected positioner up Change selected positioner down Return to previous screen Go to main screen 900008 The XPS RC remote control controls the XPS through a combination of different screen screen dependent touch field and the above mentioned permanent push buttons The different screens are e Initialization screen This screen appears when the RC is powered up and remains until the controller recognizes the remote cont
13. relevant provisions of the Directive 2004 108 EC relating to electro magnetic compatibility EMC complies with all the relevant provisions of the Directive 2006 95 EC relating to electrical equipment designed for use within certain voltage limits Low Voltage was designed and built in accordance with the following harmonised standards NF EN 61326 1 2006 Electrical equipment for measurement control and laboratory use EMC requirements Part 1 General requirements NF EN 55011 2007 Class A NF EN 61000 3 2 2006 A1 2009 A2 2009 Electromagnetic compatibility EMC Part 3 2 Limits Limits for harmonic current emissions NF EN 61010 1 2001 Safety requirements for electrical equipment for measurement control and laboratory use Part 1 General requirements was designed and built in accordance with the following other standards NF EN 61000 4 2 NF EN 61000 4 3 NF EN 61000 4 4 NF EN 61000 4 5 NF EN 61000 4 6 NF EN 61000 4 11 Date 10 06 2011 Dominique DEVIDAL Quality Director MICRO CONTROLE Spectra Physics Zone Industrielle F 45340 Beaune La Rolande France EDH0207En1030 06 14 iv Exper ience Solutions XPS RC XPS Remote Control Preface Confidentiality amp Proprietary Rights Reservation of Title The Newport Programs and all materials furnished or produced in connection with them Related Materials contain trade secrets of Newport and are for use only in the manner
14. rol and starts communication with it e POSITION screen Displays the current positions of all positioners an error indicator for each positioner an indicator for the selected positioner and the name of the selected positioner e JOG screen Allows jogging a positioner Newport Experience Solutions 1 EDH0207En1030 06 14 XPS RC XPS Remote Control e Move screen Allows moving a positioner to predefined positions and by incremental steps of various length e JOG SETTINGS screen Allows setting a new value for the jog velocity e MOVE SETTINGS screen Allows setting a new value for velocity and acceleration e Main screen Allows choice between the POSITION screen and View IP Configuration screen more options to come e View IP configuration screen Displays the controller IP address the subnet mask the controller name and the DNS suffix in the case of DHCP IP address e STATUS screen Displays the status of the selected group and the error status of the selected positioner 20 Startup and Error Recovery Process Delay 1 second Check XPS RC communication Coe Ng disconnected Check XPS RC Save comm error in file firmware If jog mode stop jog Compatible NO U Initialize XPS RC XPS RC main loop e Check XPS RC buttons e Execute commands e Update information Delay Newport EDH0207En1030 06 14 2 Experience Solutions XPS RC XPS Re
15. tilities is needed The Group state line displays the current group state number To know its meaning press directly on the displayed number to open the Detailed Status screen Detailed Status Screen Selected positioner name QAD Newport XPSJ aC Remote Control 9000060 QW Newport 8 Experience Solutions XPS RC XPS Remote Control 4 10 MENU Screen This screen appears when pressing the add Home symbol of F6 button Go to GO Newport e XPS RC Remote Control IP VIEW screen ___ Go to POSITION screen Press on the POSITIONS button to open the POSITION screen or press on the VIEW IP CONFIGURATION buttons for the IP VIEW screen 4 11 IP VIEW Screen When the IP address of the controller is provided by a DHCP server dynamic IP address the following screen appears NO Newport XPS RC Remote Control Otherwise in case of a fixed controller IP address the following screen appears CY Newport XPS RC Remote Control QW Newport Experience Solutions 9 EDH0207En1030 06 14 XPS RC XPS Remote Control m Maintenance and Service 5 1 Enclosure Cleaning The XPS RC remote control should only be cleaned with a lightly damped cloth or sponge with a soapy water solution Do not use an acetone or alcohol solution this will damage the finish of the enclosure 5 2 Obtaining Service The XPS RC remote control contains no user serviceable parts To obtain infor
16. umerical input screen When changes are done press the OK button to return to the MOVE screen CY Newport Experience Solutions 1 EDH0207En1030 06 14 XPS RC XPS Remote Control 4 8 Selected positioner name GO Newport XPSPAC Remote Control 24 Changes to the Move velocity get only applied when the following conditions are true e The Move velocity does not exceed the XPS RC maximum manageable velocity value 0 001 252 4294967 296 e The Move velocity does not exceed the current selected positioner max imum velocity Changes to the Move acceleration get only applied when the following conditions are true e The Move acceleration does not exceed the XPS RC maximum manage able acceleration value 0 001 2 4294967 296 e The Move acceleration does not exceed the current selected positioner maximum acceleration STATUS Screen When the user presses the STATUS button in the POSITION screen the following screen appears Selected positioner name Go to Detailed Status screen QD Newport XPSVAC Remote Control error 4 9 Selected positioner name GO Newport XPSPAC Remote Control EDH0207En1030 06 14 EH a Positioner _ ea M e status 900000 900000 Three lines End of Run End of Run and Other error show some of the possible positioner errors In case of Other error further error debugging using the XPS software u

XPS-RC User Manual - Newport Corporation

Contents

Download Pdf Manuals

Related Search

Related Contents