Manual - Musik Produktiv
Contents
1. ADI wa RICOCHET j Wy N VAN Wy Ny NY N vy 00 User Instructions 8 15 2015 ADJ Products LLC all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ADJ Products LLC logo and identifying product names and numbers herein are trademarks of ADJ Products LLC Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ADJ Products LLC brands and product names are trademarks or registered trademarks of their respective companies ADJ Products LLC and all affiliated companies hereby dis claim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe unsufficient and negligent as sembly installation rigging and operation of this product Europe Energy Saving Notice Energy Saving Matters EuP 2009 125 EC Saving electric energy is a key to help protecting the enviroment Please turn off all electrical products when they are not in use T2. No light output from the unit 1 Be sure the fuse has not blown The fuse is located on the rear panel inside the power socket See Fuse Replacement ADJ Products LLC www adj com Ricochet Instruction Manual Page 22 Ricochet Warranty MANUFACTURER S LIMITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought For warranty service you must obtain a Return Authorization number RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the product only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product ADJ Products
3. DMX Control Universal DMX Control This function allows you to use a univer sal DMX 512 controller to control the master dimmer rotation and color A DMX controller allows you to create unique programs tailored to your individual needs 1 The Ricochet has 2 DMX channel modes 12 amp 15 channels See pages 15 22 for detailed description of the DMX values and traits 2 To control your fixture in DMX mode follow the set up procedures on pages 5 6 as well as the set up specifications that are includ ed with your DMX controller Follow the instructions on page 8 to set the DMX address Use the controller s faders to control the various DMX fixture traits For longer cable runs more than a 100 feet use a terminator on the last fixture 5 For help operating in DMX mode consult the manual included with your DMX controller Ricochet P Ricochet Master Slave Configuration Master Slave Configuration This function will allow you to link up to 16 units together and operate without a controller In a Master Slave set up one unit will act as the controlling unit and the others will react to the controlling units programs Any unit can act as a Master or as a Slave 1 Using approved DMX data cables daisy chain your units togeth er via the XLR connector on the rear of the units Remember the Male XLR connector is the input and the Female XLR connector is the output The first unit in the chain master will use the female XLR conne
4. 1 Press the MENU button until Reset is displayed Press the ENTER button and the unit will reset itself ADJ Products LLC www adj com Ricochet Instruction Manual Page 12 Ricochet Offset Menu Offset Menu To enter the offset adjustment submenu press the ENTER button for at least 5 seconds In this submenu you are able to adjust the original position of the pan tilt gobo wheel and color wheel Pan Offset Adjustment of the Pan position 1 Press the ENTER button for at least 5 seconds then press the UP or DOWN buttons so that Pan Offset is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit Tilt Offset Adjustment of the Tilt position 1 Press the ENTER button for at least 5 seconds then press the UP or DOWN buttons so that Tilt Offset is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit Color Offset Adjustment of the color wheel 1 Press the ENTER button for at least 5 seconds then press the UP or DOWN buttons so that Color Offset is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit ADJ Products LLC www adj com Ricochet Instruction Manual Page 13
5. 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info americandj com A D J Supply Europe B V Junostraat 2 6468 EW Kerkrade Netherlands service adjgroup eu www adj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On HOM facebook com americandj twitter com americandj youtube com adjlighting
6. ADJ Products LLC www adj com Ricochet Instruction Manual Page 6 Ricochet System Menu DMX Address Channel Mode Slave Mode Show Mode Sound Mode Oo Sound Sense DMX Last State Off Pan Invert Tilt Invert MENU Back Light Auto Test Fixture Temp Fixture Time Firmware Version Reset ADJ Products LLC www adj com Ricochet Instruction Manual Page 7 Ricochet System Menu On Board System Menu The Ricochet comes with an easy to navi gate system menu This next section will detail the functions of each command in the system menu Please read the next section thor oughly To access the main menu press the MENU button Press the UP or DOWN buttons until you reach function you wish to change When you reach the function you wish to change press the ENTER button When a function is selected use the UP or DOWN buttons to change the func tion settings Once your changes are made press the ENTER button and then press and hold the MENU button for at least three seconds to confirm and lock the change into the system memory If the MENU button is not pressed and held within eight seconds the fixture will automatically confirm and lock the change into the system memory To exit without making any changes press the MENU button DMX Address This will tet you set your desired DMX address 1 Press the MENU button until DMX Address is displayed press ENTER 2 The current DMX address will be
7. LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual This is not a service contract and this warranty does not include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect ADJ Products LLC reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warran
8. of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requirements For DMX Operation The Ricochet has two DMX channel modes 12 channel mode and 15 channel mode The DMX address is set on the top panel of the Ricochet Your unit and your DMX controller require a approved DMX 512 110 Ohm Data cable for data input and data output We recommend Accu Cable DMX cables If you are making your own cables be sure to use standard 110 120 Ohm shielded cable This cable may be purchased at almost all professional sound and lighting stores Your cables should be made with a male and female XLR connector on either end of the cable Also remember that DMX cable must be daisy chained and cannot be split Figure 1 ADJ Products LLC www adj com Ricochet Instruction Manual Page 5 Ricochet DMX Set Up Notice Be sure to follow figures two and three when making your own cables Do not use the ground lug on the XLR connector Do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior COMMON DMX512 ODT DMX512 IN 3 PIN XLR DMX 3 PIN XLR Figure 2 XLR Pin Configuration 4 1 Li i Li 2 Cold 1 Ground pin 1 Ground ie Pin 2 Data Compliment negative i i I J XLR Ma
9. fixtures maxi mum for 230V After the maximum amout of fixtures is connected you will need to use a new power outlet They must be the same fixtures DO NOT mix fixtures Ricochet Fuse Replacement Fuse Replacement Unplug the unit from any power source it may be connected to Once the power has be disconnected use a phillips head screw driver to unscrew the fuse holder located around the I E C inputs Remove the bad fuse and replace with a new one and screw the fuse holder back in Warning If after replacing the fuse you continue to blow fuses STOP using the unit Contact customer support for further instructions Con tinuing to use the unit may cause serious damage Ricochet Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and external lenses should be carried out periodically to opti mize light output 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing Clean the external optics with glass cleaner and a soft cloth every 20 days Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew In heavy use we recom mend cleaning on a monthly basis Periodic cleaning will ensure lon gevity and crisp beam output N ge Ricochet Trouble Shooting Trouble Shooting Listed below is a problem that you may encounter with a solution
10. 90 DEGREES PATTERN 29 180 DEGREES 270 DEGREES PATTERN MACRO 135 245 COUNTER CLOCKWISE ROTATION SLOW FAST 246 255 PATTERN 10 PATTERN ZOOM PATTERN 11 PATTERN ZOOM MANUAL PATTERN 12 PATTERN ZOOM SLOW FAST PATTERN 13 PATTERN 14 PATTERN 15 PATTERN 16 STROBE SLOW FAST PATTERN 17 OPEN PATTERN 18 SLOW OPEN FAST CLOSE PATTERN 19 OPEN PATTERN 20 FAST OPEN SLOW CLOSE PATTERN 21 OPEN PATTERN 22 RANDOM STROBE PATTERN 23 OPEN PATTERN 24 Rae MASTER DIMMER PATTERN 25 0 255 0 100 PATTERN 26 PFY SPECIAL FUNCTIONS PATTERN 27 0 79 NO FUNCTION ADJ Products LLC www adj com Ricochet Instruction Manual Page 19 ADJ Products LLC www adj com Ricochet Instruction Manual Page 20 Ricochet 15 Channel Mode SPECIAL FUNCTIONS ALL MOTORS RESET PAN TILT MOTORS RESET COLOR MOTOR RESET NO FUNCTION BLACKOUT WITH PAN TILT MOVE BLACKOUT WITH COLOR CHANGE NO FUNCTION Ricochet Photometric Chart LUX w 78785 45450 25180 15610 10040 80 84 85 87 88 90 91 99 100 109 110 119 120 255 nn Zl Tt om gs rn SS YS LY A RR CH Gd SS SS SS SS Se Distance m 0 1 0 2 0 3 0 4 0 5 0 Diameter m 0 07 0 14 0 21 0 279 0 349 ADJ Products LLC www adj com Ricochet Instruction Manual Page 21 Ricochet Power Cord Daisy Chain With this feature you can connect the fixtures to one another using the IEC input and output sockets The quantity that can be connected is 16 fixtures maximum for 120V and 30
11. E ROTATION FAST SLOW STOP 135 245 COUNTER CLOCKWISE ROTATION SLOW FAST ADJ Products LLC www adj com Ricochet Instruction Manual Page 15 ADJ Products LLC www adj com Ricochet Instruction Manual Page 16 maT 12 Channel Mode LEII 15 Channel Mode Value Function Value Function EEr PATTERN ROTATION PAN 246 255 STOP 0 127 PAN MOVEMENT B 255 PATTERN MOVEMENT SHAKING SLOW FAST _0 255 TILT 02427 TILT MOVEMENT 128 255 SHAKING SLOW FAST 4 PATTERN ZOOM las PATTERN ZOOM MANUAL 128 255 PATTERN ZOOM SLOW FAST OPEN amp COLOR 1 COLOR 1 COLOR 1 amp 2 COLOR 2 STROBE SLOW FAST COLOR 2 amp 3 OPEN COLOR 3 SLOW OPEN FAST CLOSE COLOR 3 amp 4 OPEN COLOR 4 FAST OPEN SLOW CLOSE COLOR 4 amp 5 OPEN COLOR 5 RANDOM STROBE COLOR 5 amp 6 OPEN COLOR 6 MASTER DIMMER COLOR 6 amp 7 0 100 COLOR 7 SPECIAL FUNCTIONS COLOR 7 amp 8 NO FUNCTION COLOR 8 ALL MOTORS RESET COLORS 1 8 COLOR GRADUAL PAN TILT MOTORS RESET COLOR ROTATION FAST SLOW COLOR MOTOR RESET STOP NO FUNCTION COLOR ROTATION SLOW FAST BLACKOUT WITH PAN TILT MOVE __6 PATTERN ZEROX BLACKOUT WITH COLOR CHANGE 7 PATTERN ZEROY NO FUNCTION ADJ Products LLC www adj com Ricochet Instruction Manual Page 17 ADJ Products LLC www adj com Ricochet Instruction Manual Page 18 Ricochet 15 Channel Mode Ricochet 15 Channel Mode Function PATTERN SPIN PATTERN MACRO 0 DEGREES PATTERN 28
12. ctor only The last unit in the chain will use the male XLR connector only For longer cable runs we suggest a termina tor at the last fixture Set the Master unit to your desired show Next press the MENU button until Slave Mode is displayed and press ENTER Press the UP or DOWN buttons so that Master is displayed and press ENTER On the slave units press the MENU button until Slave Mode is displayed and press ENTER Press the UP or DOWN buttons so that either Slave 1 or Slave 2 is displayed and press ENTER 4 The slave units will now follow the Master unit N wo ADJ Products LLC www adj com Ricochet Instruction Manual Page 13 Ricochet ADJ UC IR Control The UC IR sold separately infrared remote gives you control of various functions See below To control the fixture you must aim the remote at the front of the fixture and be no more then 30 feet away STAND BY Pressing this button will blackout the fixture FULL ON Press this button for full intensity Once the button is re leased it will return normal intensity FADE GOBO This button is invalid for this fixture DIMMER and DIMMER Use these buttons to adjust the out put intensity STROBE This button is invalid for the fixture COLOR Press this button and use buttons 1 9 to adjust speed and direction 1 9 When Show 0 is pressed buttons 1 6 will allow you to select a show mode to run When t
13. displayed Press the UP or DOWN buttons to find your desired address 3 Press ENTER to confirm then connect your DMX controller Channel Mode This will tet you select your desired DMX Channel mode 1 Press the MENU button until Channel Mode is displayed press ENTER 2 X Chan will now be displayed X represents the displayed DMX channel mode Press the UP or DOWN buttons to find your desired Channel mode 3 Press ENTER to confirm ADJ Products LLC www adj com Ricochet Instruction Manual Page 8 Ricochet System Menu Slave Mode This will tet you set unit as a master or a slave in a master slave configuration 1 Press the MENU button until Slave Mode is displayed press ENTER Either Master Slave 1 Slave 2 will be displayed 2 Press the UP or DOWN buttons until your desired setting is displayed press ENTER to confim Show Mode show modes 0 7 Factory programs Show mode can run with or without sound active mode active 1 Press the MENU button until Show Mode is displayed press ENTER 2 Show X will now be displayed X representing a number between 0 7 Show s 1 7 are factory set shows while Show 0 is random show mode Use the UP or DOWN buttons to find your desired show 3 When you have found your desired show press ENTER then press and hold the MENU button for at least 3 seconds to acti vate After you have set your desired sh
14. erate normally or exhibits a marked change in performance ADJ Products LLC www adj com Ricochet Instruction Manual Page 4 Ricochet DMX Set Up Power Supply The ADJ Ricochet contains a automatic voltage switch which will auto sense the voltage when it is plugged into the power source With this switch there is no need to worry about the cor rect power voltage this unit can be plugged in anywhere DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fixture DMX data is sent as serial data that trav els from fixture to fixture via the DATA IN and DATA OUT XLR ter minals located on all DMX fixtures most controllers only have a DATA OUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a sin gle controller as long as all fixtures and the controller are DMX com pliant To ensure proper DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle When a fixture is assigned a DMX address
15. he Color button is pressed buttons 1 9 will control speed and direction SOUND ON amp OFF Use the buttons to activate and deactivate sound active mode SHOW 0 This activates the show mode Use buttons 1 6 to select your desired show ADJ Products LLC www adj com Ricochet Instruction Manual Page 14 Ricochet 12 Channel Mode Ricochet 12 Channel Mode Function Value Function PAN PATTERN MACRO PAN MOVEMENT 26 33 PATTERN 3 128 255 SHAKING SLOW FAST 34 42 PATTERN 4 43 50 PATTERN 5 TILT 51 59 PATTERN 6 TILT MOVEMENT 60 67 PATTERN 7 128 255 SHAKING SLOW FAST 68 76 PATTERN 8 0 255 TILT FINE 0 100 77 84 PATTERN 9 OPEN amp COLOR 1 COLOR 1 COLOR 1 amp 2 COLOR 2 COLOR 2 amp 3 COLOR 3 COLOR 3 amp 4 COLOR 4 COLOR 4 amp 5 COLOR 5 COLOR 5 amp 6 COLOR 6 COLOR 6 amp 7 COLOR 7 COLOR 7 amp 8 COLOR 8 COLORS 1 8 COLOR GRADUAL COLOR ROTATION FAST SLOW 85 93 94 101 102 110 111 118 119 127 128 135 136 144 145 152 153 161 162 169 170 178 179 186 187 195 196 203 204 212 213 220 221 229 230 237 238 246 247 255 PATTERN 10 PATTERN 11 PATTERN 12 PATTERN 13 PATTERN 14 PATTERN 15 PATTERN 16 PATTERN 17 PATTERN 18 PATTERN 19 PATTERN 20 PATTERN 21 PATTERN 22 PATTERN 23 PATTERN 24 PATTERN 25 PATTERN 26 PATTERN 27 PATTERN 28 PATTERN 29 STOP PATTERN ROTATION COLOR ROTATION SLOW FAST STOP PATTERN MACRO 10 120 CLOCKWIS
16. le Socket I 1 1 Ground 2 Cold i 1 1 l if 1 1 Figure 3 Pin 3 Data True positive Special Note Line Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease the possibilities of erratic behavior Termination reduces signal errors and avoids signal transmission problems and interference It is always advisable G a to connect a DMX terminal Resistance 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture Figure 4 5 Pin XLR DMX Connectors Some manufactures use 5 pin DMX 512 data cables for DATA transmission in place of 3 pin 5 pin DMX fixtures may be implemented in a 3 pin DMX line When inserting stan dard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart below details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male In Ground Shield Data Compliment signal Data True signal Not Used Do Not Use Not Used Do Not Use
17. nter Tilt 1 Invert Titt Inversion 1 Press the MENU button until Tilt 1 Invert is displayed press ENTER Either Normal or Invert will be displayed 2 To activate the Tilt inversion press the UP or DOWN buttons until Invert is displayed press ENTER to confim To deacti vate Tilt inversion select Normal and press Enter Auto Test This function will run a self test program 1 Press the MENU button until Auto Test is displayed press ENTER 2 The fixture will now run a self test Press the MENU button to exit ADJ Products LLC www adj com Ricochet Instruction Manual Page 11 Ricochet System Menu Fixture Temp With this function you can display the running temperature of the unit 1 Press the MENU button until Fixture Temp is displayed press ENTER 2 The current running temperature of the unit will now be dis played Press the MENU button to exit Fixture Time witn this function you can display the running time of the unit 1 Press the MENU button until Fixture Time is displayed press ENTER 2 The running time of the unit will now be displayed Press the MENU button to exit Firmware Version This will display the software version 1 Press the MENU button until Firmware Version is displayed Press the ENTER button and the software vesion will be dis played 2 Press the MENU button to exit Reset This function will reset the unit
18. nty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty batteries which have a 180 day limited war ranty Only the L E D s carry a 2 year warranty excluding StarTec Series which a carries a 1 Year Limited Warranty Note 2 Year Warranty only applies to purchases within the United States e ADJ DMX Controllers 2 Year 730 Days Limited Warranty excluding faders and tact switches ADJ Products LLC www adj com Ricochet Instruction Manual Page 23 Ricochet Notes ADJ Products LLC www adj com Ricochet Instruction Manual Page 24 Ricochet Specifications MODEL Ricochet VOLTAGE 100V 240V 50 60Hz LED 1 X 20W LumiEngin LED BEAM ANGLE 4 Degrees POWER CONSUMPTION 41W DIMENSIONS 11 25 L x 9 75 W x 9 75 H 285 x 250 x 248mm WEIGHT 11 Ibs 5 Kgs POWER CORD DAISY CHAIN 16 Fixtures Max 120V 30 Fixtures Max 240V FUSE 1 Amp WORKING POSITION Any Safe Position COLORS 8 White amp Split Colors DMX Modes 2 DMX Modes 12 amp 15 WARRANTY 2 Years 730 Days Auto Sensing Voltage This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice ADJ Products LLC www adj com Ricochet Instruction Manual Page 25 ADJ Products LLC
19. o avoid power consumption in idle mode disconnect all electrical equipment from power when not in use Thank you Ricochet Introduction Introduction Thank you for purchasing the Ricochet by ADJ Products LLC The Ricochet is a hybrid LED laser simulator The unit has 3 operating modes show mode sound active mode amp DMX Controlled It can be used as a stand alone unit or in a master slave configuration Unpacking Every Ricochet has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for further instructions Please do not return the system to your dealer without first contacting cus tomer support Customer Support ADJ Products LLC provides a toll free customer support line to pro vide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or suggestions Ser vice Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 800 322 6337 Fax 823 582 2941 E mail support americandj com To purchase par
20. of an internal short Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never operate this unit when it s cover is removed Never plug this unit in to a dimmer pack Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product out doors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit e Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 23 for cleaning details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances inclu ding amplifiers that produce heat The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to op
21. ow it can be changed at any time using the UP or DOWN buttons Sound Mode In this mode the unit will run in sound active mode 1 Press the MENU button until Sound Mode is displayed press ENTER 2 Either On or Off will now be displayed Use the UP or DOWN buttons to toggle between On and Off 3 Press ENTER to confirm your selection the press and hold the MENU button to activate ADJ Products LLC www adj com Ricochet Instruction Manual Page 9 Ricochet System Menu Sound Sense In this mode you can adjust the sound sensitivity of the sound active mode 1 Press the MENU button until Sound Sense is displayed press ENTER 2 Press the UP or DOWN buttons to adjust the sensitivity level The sensitivity level can be adjusted between 0 the lowest and 100 most sensitive 3 Press ENTER to set you desired level DMX Last State This mode can be used as a precau tion mode that in case the DMX signal is lost interrupted or power is lost the operating mode chosen in the setup is the running mode the fixture will go into when the DMX signal is lost You can also set this as the operating mode you would like the unit to return to when power is applied 1 Press the MENU button until DMX Last State is displayed and press ENTER The current last state setting will be displayed 2 Use the UP or DOWN buttons to find a mode you would like the unit to go into in case the DMX
22. return package A brief description of the problem as well as the R A num ber must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must pro vide a copy of your proof of purchase invoice You may obtain a R A number by contacting customer support at 800 322 6337 Ricochet Installation The unit should be mounted using a mounting clamp not provided affixing it to the mounting bracket that is provided with the unit Always ensure that the unit is firmly fixed to avoid vibration and slip ping while operating Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times the unit s weight Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture The equipment must be installed by a professional and it must be installed in a place where it is out of the reach of people s grasp ADJ Products LLC www adj com Ricochet Instruction Manual Page 3 Ricochet Safety Precautions To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case
23. signal is lost e Master Slave If the DMX signal is lost or power is applied the unit will automatically go into Master Slave mode and run a built in show e Blackout If the DMX signal is lost or interrupted the unit will automatically go into stand by mode e Last State If the DMX signal is lost the fixture will stay in the last DMX setting If power is applied and this mode is set the unit will automatically go into the last DMX set up 3 Press ENTER to confirm your desired set up ADJ Products LLC www adj com Ricochet Instruction Manual Page 10 Ricochet System Menu Back Light with this function the display back light will turn off after 2 minutes 1 Press the MENU button until Back Light is displayed press ENTER 2 Either ON or OFF will now be displayed Press the UP or DOWN buttons to select ON to keep the LED display on at all times or OFF to allow the LED display to turn off after 2 min utes Press any button to turn on the LED display again 3 Press ENTER and then press and hold the MENU button for at least three seconds to confirm Pan Invert Pan Inversion 1 Press the MENU button until Pan Invert is displayed press ENTER Either Normal or Invert will be displayed 2 To activate the Pan inversion press the UP or DOWN buttons until Invert is displayed press ENTER to confim To deacti vate Pan inversion select Normal and press E
24. ts online visit http parts americandj com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty In the unlikely event your unit may require service please contact ADJ Please recycle the shipping cartoon when ever possible ADJ Products LLC www adj com Ricochet Instruction Manual Page 2 Ricochet General Instructions To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference Ricochet Features Includes Built In Hanging Yoke 8 Colors Plus White amp Split Colors 3 Operational Modes Show Mode Sound Active amp DMX Control e Power Cord Daisy Chain See page 23 AJD UC IR Compatible Sold Separately Ricochet Warranty Registration The Ricochet carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the
25. ty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS e Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding LED and lamps e Laser Products 1 Year 365 Days Limited Warranty excluding laser diodes which have a 6 month limited warranty e L E D Products 2 year 730 days Limited Warra
Download Pdf Manuals
Related Search