Photomatix Pro 3.2 User Manual
Contents
1. Tone curve options The recommended option Take tone curve of color profile is selected by default This is usually the best choice when the image files come from a DSLR camera or have been converted from RAW files This option loads the Tone Reproduction Curve data from the ICC Photomatix Pro User Manual Page 5 color profile associated with the source images in order to determine the non linear function applied to the raw sensor s data If no profile is available it uses the tone reproduction curve of the Adobe RGB color profile When the images are scanned films or taken with a compact camera it may be worthwhile to check the option Attempt to reverse engineer tone curve applied If your source images are 16 bit TIFF files that have been converted from RAW files with a RAW converter that allow the image to be left in linear space note very few RAW converters allow this then check the option No tone curve applied pixel values are linear Only check this option if you are 100 sure that the tonal values of the images are linear relative to the values of light captured Please note that the term linear may have a different meaning depending on the RAW converter In Adobe Camera Raw for instance linear is relative to the Adobe RGB color space and not to the values of light so you should never check this option with files converted with Photoshop or Lightroom RAW conversion settings When your2. List of saved presets When you save a preset via Save 3 Settings the saved preset will be listed under the built in Save Settings presets Load Settings Load settings previously saved via Save Settings outside the Presets folder Save Settings Save settings in the form of a preset either in the Presets folder or elsewhere When it is saved in the Presets folder it will show in the list of saved presets below the built in presets for quick access Help To turn on the context sensitive help system select the Help icon Hover your mouse over a control to see a description and other helpful information Photomatix Pro User Manual Page 10 2 2 2 Details Enhancer controls The controls for the Details Enhancer tone mapping method are divided into four groups The general adjustments appear at the top of the Tone Mapping Settings dialog while further other adjustments Tone Settings Color Settings and Miscellaneous Settings are located under expandable sections General settings Strength 70 Strength ay a Controls the strength of the contrast enhancements A eee oria value of 100 gives the maximum increase in both local and global contrast enhancements The default value is 70 Luminosity 0 0 A Color Saturation Microcontrast 0 0 Controls the saturation of the RGB color channels The greater the saturation the more intense the color A value Smoothing 0 0 of O produces a g
3. Browse button of the Exposure Fusion Selecting source images dialog An Open panel will display to allow you to select your photos taken under different exposure settings Highlight the image files that you wish to combine Then click on the Select button and click OK to proceed further The Align Source images option corrects for misalignment problems if the camera moved slightly between the bracketed frames This is the case with hand held photographs and may even happen when shooting with the aid of a tripod Click on OK and the Exposure Fusion dialog will appear Select the Exposure Fusion method of your choice Some methods allow settings and some are fully automatic Try different methods to get the most pleasing results The default method Highlights amp Shadows Adjust is often a good choice Photomatix Pro User Manual Page 17 3 1 2 Highlights amp Shadows Adjust Accentuation Adjusts the strength of local contrast enhancements The default value is 0 Blending Point Adjusts the weighting given to the underexposed versus overexposed images When you move the slider to the right overexposed images are favored which has the effect of brightening the image The reverse applies when you move the slider to the left The default value is 0 Shadows Adjusts the brightness of the shadows without affecting the highlights The default value is 0 Color Saturation A
4. be stitched with each view having been taken under three exposures 2 0 2 You will then have 12 photos and may need to place them in three separate subfolders composed of four photos each as follows subfolder1 contains four photos part of the panorama taken at EV 2 subfolder2 contains four photos part of the panorama taken at EV 0 subfolder3 contains four photos part of the panorama taken at EV 2 If you check Process subfolders and select grouped by exposures the batch will combine the first file of subfolder1 with the first file of subfolder2 and the first file of subfolder3 The batch will then combine the second file of subfolder1 with the second file of subfolder2 and the second file of subfolder3 and so on for the third and fourth file of each subfolder Photomatix Pro User Manual Page 23 Section 5 Tips and Techniques 5 1 Integrating Lightroom with Photomatix Pro If you have Lightroom you can export photos for processing in Photomatix Pro directly from Lightroom and have them re imported back into the Lightroom library if you wish to The Lightroom Export plug in to Photomatix is free and delivered in the Photomatix Pro package Please refer to the HDRsoft website at http Avww hdrsoft com download lrplugin html for the installation instructions and a short tutorial showing how to use the Lightroom export plug in for HDR processing in Photomatix Pro 5 2 Using Photomatix Pro with a single image fil
5. gives you results you like click the Process button to fuse to the images at full resolution instead of fusing a low resolution for the preview After the files are processed you can save the fused image by choosing File gt Save As The resulting fused image always has a bit depth of 16 bits channel This is even the case if the source images were JPEGs or 8 bit TIFF files On the Save Panel the File Type menu offers the following options TIFF 16 bit Best choice for further processing TIFF 8 bit For use in applications that cannot deal with 16 bit File name icamival_expo 2_ 2_0 la Save as type tif lt TIFF 8 bit gt E Es or for avoiding too large file size on disk JPEG For use on the web without further editing Photomatix Pro User Manual Page 19 Section 4 Automating with batch processing Batch processing lets your computer automatically process image files with no user intervention This can save you a lot of time when you have many series of photos to process Photomatix Pro offers two different batch modes Both are available under the Automate menu Processing of series of bracketed photos this is done with Batch Processing Processing of single image files this is done with Single File Conversion The Batch Processing function intended for series of bracketed photos is particularly useful for creating 32 bit HDR image files ready to be tone mapped in
6. source images are RAW files the dialog shows options to let you select a white balance and color primaries Raw conversion settings White Balance Color primaries HDR image Adobe RGB X color space from which primaries will be taken By default Photomatix will use the As Shot White Balance read from the EXIF metadata when converting the RAW data to HDR You can adjust the White Balance by selecting a pre defined white balance from the drop down menu or by specifying the color temperature in Kelvin A preview lets you see the effect of the change on the source image The RAW data is in a color space specific to the camera Photomatix will convert the data into a standardized color space by default Adobe RGB You can however select SRGB or ProPhoto RGB instead Please note that the selected color space is used for the color primaries only and not for the tone reproduction curve Since the HDR image values are in linear space they do not have a tone curve The tone curve of the profile associated with the image will only be applied during the tone mapping step and not to the HDR image itself Photomatix Pro User Manual Page 6 2 1 2 Comments on the generated HDR image In the companion HDR viewer window the small image area at the top displays a zoomed in section of the properly exposed HDR image at the current pointer location The generated 32 bit HDR image is in an unprocessed state which means that the la
7. with a view outside the window on a sunny day You need to take at least five exposures in two EV steps or nine exposures in one EV steps to capture this type of scene but you may need more Taking the exposures manually is recommended in these cases The source photographs for HDR processing can be taken with digital or film based cameras The only requirement is that the exposure can be adjusted when taking pictures If you use a film based camera you will need to scan the photographs into your computer before processing them see subsection 1 3 below 1 1 Camera set up Set your camera to Aperture priority A setting so that only the shutter speed varies between the exposures Select a low ISO e g ISO 100 or lower Turn the flash off The flash may try to balance the exposure of all the images when a range of exposures is the goal Whenever possible mount the camera on a tripod Even though Photomatix Pro offers automatic alignment of hand held photos using a tripod is always better DSLR cameras and some compact digital cameras offer Automatic Exposure Bracketing AEB This enables you to automatically take three or more exposures in a row one at the proper exposure One or more underexposed and one or more overexposed Follow these steps if your camera offers AEB mode Select the Continuous shooting mode on the camera s drive setting Consult your camera manual for model specific instructions for using this se
8. Introduction Photomatix Pro 3 2 User Manual Photomatix Pro User Manual Introduction Table of Contents al golo les flo Jg Ee Ras porre URGE ROCA crer RA PEER DRA RO NR SRP DA RENNES RA UR SE ERRO NR RPE NR 3 Section 1 Taking photos for HDR seriais 1 et Camera set VD ani Sanita este Ra Rida ndo dna ata A O A ect cco R o oo aa i e 1 1 2 Selecting the EXPOSTOS mat asd A AG E a ana eRe siaa iaoa 3 1 3 Taking photos for HDR with film based cameras ir eeeneeeeeeeteeeeteneesnaeeetaaes 3 Section 2 Creating an HDR image and processing it with Tone Mapping 4 2 1 Creating a 32 bit HDR iMage sastiaimaainsalatrorepadeatoio duro lena viieige cobs Le daa tenda aids fm idnn gaveta 4 2 1 1 Settings for Generate HDR sas pas sofasasgie Pe Ried de AA deed AS ud 5 2 1 2 Comments on the generated HDR image rar 7 2 2 Processing the HDR image with Tone Mapping cette eeenneeteeeeteneeeeaeeteeeeteneeeeneeey 8 22 MGC ela COMO S ns Sh ies eat A tea ete A ee tot Ri OAT Ie Tle 9 2 2 2 Details Enhancer COntrols cccccccescecceeceeeeeeeeeneeeeneneeeesneneeeseeeceenneaeseeeeaeeseneaaeneneaes 11 2 2 9 Tone Compressor CONTOS es sima ie eid le ee ee ea 14 Section 3 Exposure FUSION scciasiieteciiacuadiadanei ewan rap ad 16 3 1 FUSING EXPOSUTOS saint tens ts ivtecgeceth ta tebabeolavielvasigekieidcedehadel au agonia dal abalo Waviniugeie bidentate 17 3 1 2 Highlights amp Shadows Adjust Los pa
9. Note though that the alignment functions are not accessible when the Process strip by strip option is used 4 3 Batch processing subfolders When your bracketed series are located in multiple folders they can all be processed in one run provided they are in subfolders of the same parent folder To do that check the Process subfolders option at bottom of the Source frame on the Batch Processing dialog and select sequentially When Process subfolders sequentially is selected the batch will process the bracketed image files in one subfolder and then move on to the next subfolder all of which are contained in the main parent folder R When your bracketed sets are composed of varying numbers of exposures for instance one set has three exposures and another five exposures you can use Process subfolders sequentially to combine the exposures in these sets in one run To do that place each set in a separate subfolder group the subfolders under a parent folder check Process subfolders sequentially and select All in the pull down menu for the number of images to process at a time If you are processing bracketed photos that will be part of a panorama you may find it useful to be able to organize your photos in such a way that all exposures of the same levels are under Photomatix Pro User Manual Page 22 the same folder Let s take as an example a panorama composed of four views that need to
10. Processing and are described below Force Exposure Values spacing to The checkbox will force the EV spacing to the specified value This option can be used when the exposure information is not available in the EXIF data or if two or more images have the same exposure information or to force the EV spacing in all cases In the latter case the exposure information in the EXIF data will be ignored Source images are linear no tone curve applied This option is intended for 16 bit TIFF files that have been converted from RAW files with a RAW converter that allows the image to be left in linear space note very few RAW converters allow this Only check this option if you are 100 sure that the tonal values of the images are linear relative to the values of light captured Note the term linear may have a different meaning depending on the RAW converter In Adobe Camera RAW for instance linear is relative to the Adobe RGB color space and not to the values of light so you should never check this option with files converted with Photoshop or Lightroom Process strip by strip Check this option if the source images are large TIFF files With this option the HDR image file will be created in several passes processing and loading only one strip of each image into memory at a time One strip is composed of a limited number of rows set to not exceed around 512 MB of RAM This option is particularly useful when processing large panoramas
11. dividually If you open another session of Photomatix Pro you can start working on the first images while Batch Processing is still processing the remaining exposure series The Batch Processing function is also useful for trying different Tone Mapping or Exposure Fusion methods for your source images This way you can then select the method that gives the best results for each exposure sequence 4 1 Using Batch Processing E Batch Processing of differently exposed images Photomatix Pro User Manual Page 20 Choose Automate gt Batch Processing or click on the Batch Processing button on the Workflow Shortcuts panel Note This section describes the batch processing of photos taken under multiple exposure settings In some cases you may be interested in batch processing single files instead such as tone mapping previously created 32 bit HDR image files saved as Radiance or OpenEXR In such cases you will have to use the Batch Single Files item under the Automate menu instead of Batch Processing To batch process series of bracketed photos do the following T Select the process es you want to run by clicking one or more checkboxes on the left hand side of the dialog Using the pull down menu below the checkboxes select the number of multiple exposures to be combined For instance select 3 if your bracketed shots consist of three exposures each i e when you have taken for each scene one photo a
12. djusts the saturation of the color channels The greater the saturation the more intense the color A value of 0 produces a grayscale image The default value is 0 White Clip Specifies how much the highlights are clipped Moving the slider to the right increases contrast but removes details in the brightest highlights The default value is 0 Black Clip Specifies how much the shadows are clipped Moving the slider to the right increases contrast but removes details in the darkest shadows The default value is 0 Midtones Adjustment Positive values brighten the image but reduce the overall contrast Negative values darken the image but increase overall contrast The default value is 0 3 1 2 Highlights amp Shadows 2 Images This method fuses only two images The dialog allows you to select which images are fused 3 1 3 Highlights amp Shadows Intensive Strength Adjusts the strength of local contrast enhancements The default value is 0 Color Saturation Adjusts the saturation of the color channels The greater the saturation the more intense the color A value of zero produces a grayscale image The default value is 0 Radius Controls the area used to calculate the weighting of the source images A higher radius reduces halos but increases processing times significantly The default value is 40 Photomatix Pro User Manual Page 18 3 2 Processing and saving the fused image Once you have found a method that
13. e When your scene is not very high contrast it is possible to use Photomatix Pro with a single shot provided this has been taken in RAW mode There are three ways to do that e Technique 1 Open your RAW file in Photomatix to convert the file into a pseudo HDR image then tone map it e Technique 2 Convert your RAW file into a 16 bit image in your favorite RAW converter then open the 16 bit TIFF or PSD file in Photomatix Pro and tone map it e Technique 3 Create two or three exposures in your RAW converter and combine them in Photomatix as if they were real exposures then process them in Photomatix Technique 3 generally gives the best results Also it has the advantage of working with Exposure Fusion Technique 3 is particular recommended if you have Lightroom Moreover the Lightroom export plug in simplifies the workflow greatly For good results with the above techniques it is important to ensure the lowest noise level at capture time To do that set the lowest ISO possible ISO 100 for instance and expose for the shadows when taking the RAW image i e overexpose your shot Even though the histogram of your camera may indicate that highlights will be lost you should still be able to recover them during RAW conversion unless the scene is too high contrast but then a single image will not be sufficient for good results with Photomatix Photomatix Pro User Manual Page 24 5 3 Processing RAW files in third party RAW con
14. e it The default value is 0 Photomatix Pro User Manual Page 12 Miscellaneous settings Miscellaneous Settings Micro smoothing Smoothes out local detail enhancements This has the Micro smoathing 2 0 effect of reducing noise in the sky for instance and tends to give a cleaner look to the resulting image The default Highlights Smoothness 0 value is 2 E Important note The Loupe may not properly show the Shadows Smoothness 0 effect of the Micro smoothing setting when the area A magnified is uniform If you want to see the effect of the Micro smoothing setting at 100 resolution on a uniform area such as the sky you will have to select an area that contains an object in the scene in addition to the sky Shadows Clipping 0 Highlights Smoothness Reduces the contrast enhancements in the highlights The value of the slider sets how much of the highlights range is affected This control is useful for preventing white highlights from turning grey or uniform light blue skies becoming dark blue grey It is also useful for reducing halos around objects placed against bright backgrounds The default value is 0 Shadows Smoothness Reduces the contrast enhancements in the shadows The value of the slider sets how much of the shadows range is affected The default value is 0 Shadows Clipping The value of the slider sets how much of the shadows range is clipped This control may be useful to cut out noise in the dark a
15. el is relatively new you may have to upgrade to a new version or wait until Photomatix Pro adds support for it Photomatix Pro User Manual Page 4 2 1 1 Settings for Generate HDR E Generate HDR Options J Align source images By correcting horizontal and vertical shifts By matching features C Reduce chromatic aberrations Reduce noise 7 Attempt to reduce ghosting artifacts Background movements 9 water or follage Moving ebjects people Detectoas ome Take tome curve of color profile recommended Attempt to reverse engineer tone curve apphed Alignment settings The Align source images option is checked by default This option corrects misalignment problems when the camera moves slightly between the bracketed frames This always happens with hand held photographs but may even happen when shooting with the aid of a tripod Photomatix Pro offers two alignment methods The first one By correcting horizontal and vertical shifts is fast but corrects for translation movements only The second one By matching features corrects for both rotation and translation and is recommended for hand held shots Given that each method is based on a different algorithm try the other one when one fails The Don t crop option is useful when the resulting images must have the same width and height as the source images Chromatic aberrations reduction This option attempts to automatica
16. es The White Point slider sets the value for the maximum of the tone mapped image pure white or level 255 The Black Point slider sets the value for the minimum of the tone mapped image pure black or level 0 The default values are 0 Color Temperature Adjusts the color temperature of the tone mapped image relative to the temperature of the HDR source image Moving the slider to the right will give a warmer more yellow orange colored look Moving the slider to the left gives a colder more bluish look A value of O default preserves the original color temperature of the HDR source image Color Saturation Adjusts the color saturation of the tone mapped image The greater the saturation the more intense the color The value affects each color channel equally The default value is 0 Photomatix Pro User Manual Page 14 2 2 4 Processing and saving the tone mapped image Once you are satisfied with the settings click the Process button to apply the tone mapping to the complete image instead of the preview only You will then be able to save the tone mapped image by choosing File gt Save As Xx If you would like to undo the Tone Mapping click the Undo Tone Mapping item of the Process menu on Windows and the Edit menu on Macintosh The tone mapped image will revert to a 32 bit HDR image which can then be tone mapped again The resulting tone mapped image always has a bit depth of 16 bits chan
17. ffers two types of processes to increase the dynamic range One process is called HDR Tone Mapping the other Exposure Fusion Both processes are designed to produce an image with an increased apparent dynamic range but their results are different You should try both and then choose the result that works best with your images The first section of this manual provides tips for taking photographs intended for High Dynamic Range HDR processing in Photomatix Pro The second section describes how to create HDR images and process them through Tone Mapping The third section deals with the Exposure Fusion functions and the fourth section with the Batch Processing tool Finally section five provides a few tips and techniques The following icons are used throughout the manual Ye Useful information and important notes KR Tips and recommendations Photomatix Pro User Manual Introduction Drag and drop You can directly access the HDR creation or Exposure Fusion processes by dragging and dropping to Photomatix Pro a group of image files of the same scene taken under different exposures On Windows you can drag the files from Windows Explorer and drop them on the opened Photomatix Pro program On Macintosh you can drag the files from the Finder and drop them on the Photomatix Pro icon on your Dock You can also drag images from other image browsers Note that you need to drag the image files belonging to the same exposure sequence toget
18. g may amplify it e The fused image does not differ much from the source images giving it a more natural look e Exposure Fusion is a simple and easy to understand process with no or few parameter settings On the other hand Exposure Fusion may not always work well when the dynamic range of the scene is high This can result in a lack of local contrast and a flat look Also the memory required for fusing exposures increases with the number of source images and their bit depth whereas the memory required for Tone Mapping depends only on the width and height of the image ye When your source images are RAW files you should convert them in your favorite RAW converter before processing them with Exposure Fusion in Photomatix This is easy to do if you have Lightroom by using the Lightroom Export Plug in to Photomatix Pro as detailed in section 5 Photomatix Pro User Manual Page 16 3 1 Fusing Exposures To start Exposure Fusion drag your images to the opened Photomatix Pro application Windows or to the Photomatix icon in the Dock Macintosh Then choose Fuse exposures Alternatively you can also click on the Exposure Fusion button of the Workflow Shortcuts or choose Process gt Exposure Fusion R Ifyou have Lightroom you should use the Lightroom Export Plug in to Photomatix Pro for your RAW images Please refer to section 5 of this manual If you have not dragged and dropped your images click the
19. ge with Tone Mapping Tone Mapping is necessary to reveal the details in shadows and highlights in your 32 bit HDR image created from multiple exposures You can either use Tone Mapping immediately after having generated an HDR image or after opening an existing HDR image file that was previously saved To access the Tone Mapping tool click on the Tone Mapping button on either the HDR Viewer window or the Workflow Shortcuts window or choose Process gt Tone Mapping Photomatix Pro offers two tone mapping methods e The Details Enhancer method is based on a local operator which means that it takes into account the local brightness context for tone mapping Pixels are processed differently depending on whether they are located in a bright or dark area of the image This method offers settings that let you process the image in creative ways e The Tone Compressor method is based on a global operator which means that pixels are processed independently of their surroundings This method produces more natural looking results When you start the Tone Mapping tool you will get two windows 1 The Tone Mapping Settings dialog provides sliders to adjust the tone mapped image to your liking The dialog also lets you save presets or load existing ones The tabs on top of the dialog let you switch between the two tone mapping methods The Process button at the bottom of the dialog will process the entire HDR image so that you can
20. have not dragged and dropped your images click on the Browse button of the Generate HDR Selecting source images dialog An Open panel will be displayed to allow you to select your photos taken under different exposure settings Highlight the image files that you want to merge into an HDR image Then click on the Select button and click OK to proceed further In case the exposure information cannot be found in the metadata of the image files Photomatix will show a dialog where you can input the relative Exposure Values for each one of your images This dialog will also be displayed if two or more source images share the same exposure information The order of the files in a bracketing sequence does not matter Photomatix Pro will systematically sort the image files based on the exposure information retrieved from the EXIF data If the exposure information is not available in EXIF data Photomatix will use the relative brightness levels of the photos Photomatix Pro can generate an HDR image from 8 bit 16 bit and RAW source files Supported file types include JPEG TIFF PSD DNG and RAW files from many camera models As the list of supported camera models for RAW files often changes when a new sub version of Photomatix Pro is released we suggest that you consult the Photomatix Pro FAQ on the HDRsoft website at http Avww hdrsoft com support raw html to check whether your camera model is supported If your camera mod
21. her in order to have them taken into account for the HDR creation and Exposure Fusion processes Workflow Shortcuts panel The functions of Photomatix Pro can be accessed via the menus To allow faster access some core functions can be launched via the Workflow Shortcuts panel Photomatix Pro User Manual Section 1 Taking photos for HDR Section 1 Taking photos for HDR The shooting phase is essential for getting good results with Photomatix To photograph a high contrast scene you need to take several exposures in order to capture information in both the highlights and the shadows of the scene The exposures taken will have to properly cover the dynamic range of the scene especially the shadows The number of photos you need depends on the scene It also depends on the Exposure Value EV spacing separating the photos If you take them in one EV steps e g 1 0 1 EV you will need more photos than if you take them in two EV steps e g 2 0 2 EV We recommend shooting in two EV steps whenever possible High contrast scenes can be grouped into roughly two types depending on their dynamic range e Medium dynamic range scene Most landscapes and other types of outdoor scenes fall into this category Three exposures taken in two EV steps i e 2 0 2 EV or five exposures taken in one EV steps are usually sufficient for this type of scene e High dynamic range scene A typical example is the interior of a room
22. ieve good results scanning these for HDR generation Turn off your scanner s auto exposure options This allows you to manually control the exposure Make sure you select the Align images option in Photomatix Pro when combining your images Photomatix Pro User Manual Page 3 Section 2 Creating an HDR image and processing it with Tone Mapping There are two steps involved in creating and processing HDR images Step 1 merges your photos taken under different exposure settings into a single 32 bit HDR image Because of its high dynamic range the 32 bit HDR image will not display properly on conventional monitors Step 2 processes the 32 bit HDR image via the Tone Mapping tool Tone Mapping will reveal the dynamic range captured in the HDR image and produce an image that can be properly displayed on conventional monitors and is ready for printing 2 1 Creating a 32 bit HDR image The easiest way to load the bracketed photos you want to merge into an HDR image is by dragging them to the open Photomatix Pro application Windows or to the Photomatix icon in the Dock Macintosh Then select the Generate HDR image option Alternatively you can also click on the Generate HDR Image button of the Workflow Shortcuts or choose Process gt Generate HDR R Ifyou have Lightroom you should use the Lightroom Export Plug in to Photomatix Pro for your RAW files Please refer to section 5 of this manual If you
23. includes an option to reduce noise on the generated HDR image it is still always better to avoid noise at capture time as much as possible There are two tips to ensure a low noise level Tipi Set alow ISO setting ISO 100 or lower whenever possible Tip 2 Overexpose sufficiently ensuring that the lightest image of your exposure sequence has its shadows in the mid tones 5 5 Photomatix Pro and color management Photomatix Pro supports color management even if RAW files are processed You should use the same working space in Photomatix Pro as you use in other image editors e g Photoshop Photomatix supports the three most popular working spaces e sRGB Used if your images are created only for the web e Adobe RGB Popular working space for printing if extremely saturated colors are not used e ProPhoto RGB Wide gamut working space This should never be used for 8 bit images For all JPEG and TIFF files Photomatix Pro preserves the color spaces of the source files Photomatix Pro User Manual Page 26 Resources You can find more tips and techniques and regularly updated information in the Photomatix Pro FAQ on the HDRsoft website at http www hdrsoft com support faq_photomatix html Photomatix Pro User Manual Page 27
24. lly correct color fringing due to chromatic aberrations of the lens Checking this option is recommended given that chromatic aberrations tend to show around high contrast edges and are thus particularly an issue for HDR images Noise reduction This option reduces chromatic noise and to a lesser extent luminance noise This option is recommended when you are processing RAW files directly in Photomatix Note that the noise reduction is done on the HDR image itself once it has been created This means that you don t have to check the noise reduction option on the dialog for generating the HDR image when you need noise reduction You can apply noise reduction to your HDR image later on by choosing Utilities gt Reduce Noise Ghosting reduction settings Ghosting artifacts appear when combining images of a dynamic scene Photomatix Pro offers options to reduce two types of ghosting artifacts The option Background movements reduces ghosting artifacts caused by background elements that follow a rhythmic pattern flowing water for instance oscillating between shadows and highlights The Moving objects people option attempts to reduce the ghosts in the combined image due to moving persons animals or objects It is important to note that selecting Moving objects people lowers the quality of the resulting HDR image Only select this option if it is really necessary and try first with Detection set to Normal
25. lobal contrast Moving them to the left reduces Black Point 0 000 clipping at the extremes The White Point slider sets the value for the maximum of the tone mapped The Black Point slider sets the value for the minimum of the tone mapped image The default value is 0 25 for the White Point setting and 0 for the Black Point setting Gamma 1 00 Gamma Adjusts the mid tone of the tone mapped image brightening or darkening the image globally The default value is 1 0 Color settings v Color Settings Temperature Adjusts the color temperature of the tone mapped Temperature 0 y image relative to the temperature of the HDR source image Moving the slider to the right will give a Saturation Highlights Ss warmer more yellow orange colored look Moving the slider to the left gives a colder more bluish look A Saturation Shadows 0 value of O default preserves the original color a temperature of the HDR source image Saturation Highlights Adjusts the color saturation of the highlights relative to the color saturation set with the Color Saturation slider Values higher than 0 increase the color saturation in the highlights values lower than O decrease it The default value is 0 Saturation Shadows Adjusts the color saturation of the shadows relative to the color saturation set with the Color Saturation slider Values higher than zero will increase the color saturation in the shadows Values lower than zero will decreas
26. mprove your analysis of the image Luminance Red Green and Blue In addition if you move your mouse back and forth across the histogram Level Count and Percentile information are provided If the histogram is turned off enable it by selecting 8 bit Histograms from the View menu Loupe When you move the mouse over the preview you will see a square marquee If you click on some position the content of that square will show up at 100 resolution in the Loupe panel You can use the option Refresh loupe only to avoid refreshing the main preview when you change settings This will soeed up the view refresh inside the Loupe window Undo amp Redo 2 e At the bottom of the Tone Mapping Settings dialog the Undo arrow to the left and Redo arrow to the right buttons let you undo and redo changes you made to the settings Photomatix Pro User Manual Page 9 Presets The Presets menu lets you quickly access default or previous settings as well as specific settings you had defined earlier It also allows you to save the current settings and load settings available outside the Presets location Natural Default Sets to the default factory values Previous Recalls the values set the last time you used the tone mapping tool a v A Built in Presets Settings for a specific look The built in presets are Natural SmoothSkies Painterly and Grunge
27. nel On the Save panel the File Type menu offers the following options TIFF 16bit Best choice for further processing File name icamival_expo 2_ 2_0 1x Savesstpe MEET E TIFF 8bit For use in applications that cannot deal with 16 ito bit or for avoiding too large file size on disk ac JPEG For use on the web without further editing Yx Choosing File gt Save settings will save the applied tone mapping settings as an XMP file so you can easily reproduce the same Tone Mapping process in the future R Ifyou save the tone mapped image as a TIFF file the tone mapping settings will be automatically embedded as XMP metadata in the TIFF file If you open the file in Photoshop you can then view the tone mapping settings under File gt Info gt Advanced mes xmo Te pers Se C Srece rey Photomatix Pro User Manual Page 15 Section 3 Exposure Fusion Exposure Fusion is the process of combining your photos under multiple exposures into one image with details in both shadows and highlights The resulting image with increased dynamic range is achieved in one step with Exposure Fusion whereas HDR Tone Mapping requires two steps Exposure Fusion was known as Exposure Blending in prior versions of Photomatix Pro Exposure Fusion offers several advantages over the HDR and Tone Mapping workflow described in the previous section e Fusing the images has the effect of reducing noise whereas HDR and tone mappin
28. rayscale image The value affects each color channel equally The default value is 46 C Light mode Luminosity Controls the compression of the tonal range which has the effect of adjusting the global luminosity level Moving the slider to the right boosts shadow details and brightens the image Moving it to the left has the opposite effect and gives a more natural look to the resulting image The default value is 0 Smoothing Controls smoothing of the contrast variations throughout the image This setting has an important influence on the look of the tone mapped image High values give a more natural look low values a more artificial or painterly look Smoothing is available in two modes The default mode new to Photomatix Pro version 3 2 is a slider If the slider is not visible uncheck Light mode in the Smoothing section The Light mode takes the form of labeled buttons and can be accessed by checking Light mode The effect on the image differs depending on the mode The Light mode tends to produce a more surreal effect Microcontrast Sets the how much local details are amplified A higher value gives a sharper look The default value is 0 Photomatix Pro User Manual Page 11 Tone settings v White Point Black Point U i on Both sliders control how the minimum and maximum values of DO e the tone mapped image are set Moving the sliders to the right o increases g
29. rea of a photo taken in a low light situation The default value is 0 Other Settings 360 image Checking this option eliminates the seam between the left and right sides of a panorama viewed in a 360 panoramic viewer The seam would otherwise show because Details Enhancer takes into account local contrast assigning different tonal values to the right and left parts of the image The default value is unchecked Note that this option is not enabled when the image is in portrait mode as the option is intended for panoramas Photomatix Pro User Manual Page 13 2 2 3 Tone Compressor controls Brightness Adjusts the overall brightness of the tone mapped image The default value is 0 Tonal Range Compression Controls the compression of the tonal range Moving the slider to the right has the effect of shifting both shadows and highlights toward the mid tones in the tone mapped image The default value is 0 Contrast Adaptation Adjusts the influence of the average brightness in relation to the intensity of the processed pixel Moving the slider to the right tends to result in more pronounced colors Moving the slider to the left tends to result in a more natural look The default value is 0 White Point Black Point Both sliders control how the minimum and maximum values of the tone mapped image are set Moving the sliders to the right increases global contrast Moving them to the left reduces clipping at the extrem
30. rge range of highlight and shadow details contained in the HDR image cannot be properly displayed on screen at this stage An unprocessed HDR image is in a way similar to a film negative or the RAW file of a digital camera The image needs further processing called Tone Mapping for display or printing KR Saving the 32 bit HDR image at this point will allow you to apply different Tone Mapping settings to the HDR source image without repeatedly following the Generate HDR procedure Photomatix Pro saves the name of the color profile in the header of an HDR image saved in the Radiance hdr format This means you will not have to re assign the color profile provided the HDR image file have been saved as Radiance and the color profile is either sRGB Adobe RGB or ProPhoto RGB However the color profile information of the source images will not be preserved if the HDR image has been saved in the OpenEXR format v Photomatix Pro allows you to create a 32 bit HDR image from a single RAW file To do this open one RAW file using File gt Open and Photomatix will convert it into a pseudo HDR image It is important to note though that an image created with a single RAW file cannot really be considered High Dynamic Range The important characteristic of this pseudo HDR image is that it is unprocessed Its dynamic range is not much larger than the range of an already converted file Photomatix Pro User Manual Page 7 2 2 Processing the HDR ima
31. s oi eee oie a Rel eee lala 18 3 1 2 Highlights amp Shadows 2 IMAGES cece a soa oe deacons cehd ee us ee tdeeenpenecedeseceb ws terepceeeereesecea et 18 3 1 3 Highlights amp Shadows Intensive ee eeesseeeeeeeeeeeeteeeeeeeeeeseeeeeeseeeeeeeseaeeseeetseeeeens 18 3 2 Processing and saving the fused image i coves noxieccseccetee Hea pee ta rete edad eee Remainder ee 19 Section 4 Automating with batch processing 20 4 1 Using Batch PROCESSING eneretten aeea CTA SRS Rappa 20 4 2 Settings specific to Batch Processing isuisieneizrtaio pezcaedecebe saver tirado sacetedetageeenious GAL ceecdeendetenuns 22 4 3 BalCit processing SUDIOIO CTS mic cies eos ass SS wa ead esi a 22 Section 5 Tips and Techniques sacana sa aa a ao 24 5 1 Integrating Lightroom with Photomatix PRO spas sk Pena de ee dee ee 24 5 2 Using Photomatix Pro with a Single image file cescceseceseeeececesereeeseeeeeeaeeeeaeeteeceeeeaeeeaeeess 24 5 3 Processing RAW files in third party RAW converters cccccceetteeeeeteeeteneeeeneeeteeeeeeneeneeees 25 5 4 Dealing WH TIONS Chi i ce at ct est coe iiie ed dead caia re tease ety Dl a 26 5 5 Photomatix Pro and color management ir ireerreaenasaeanaraanranenasaaanaaaanaaannada 26 Photomatix Pro User Manual Introduction Introduction Photomatix Pro processes multiple photographs of a high contrast scene into a single image with details in both highlights and shadows Photomatix o
32. should be empty until 1 3 of the histogram s width If this is not the case you will have to add one or more photos taken with longer exposure times Another option is to re shoot the exposure sequence with the normal exposure set one or more EVs higher if your most underexposed image in the exposure sequence was too dark This is the case when the histogram of your darkest image is completely empty on the right half The number of exposures needed depends on the dynamic range of the scene in addition to the exposure increment For most outdoor scenes three exposures taken at 2 exposure increments will be sufficient provided the scene does not include the sun However for the interior of a room with a bright view out the window you will need at least five images taken with an exposure increment of 2 or nine images taken with an exposure increment of 1 In scenes with extreme differences between light and dark details you should change the exposures manually to ensure you capture a wide enough range to cover your scene 1 3 Taking photos for HDR with film based cameras Follow the camera setup listed at the top of subsection 1 1 and the tips on selecting exposures in subsection 1 2 Keep in mind that you will not have the option of previewing the live histogram to determine your exposure range Scan film or slides not prints Photo labs will attempt to make the best print from each of your source images and you will not ach
33. t median exposure one underexposed and one overexposed Select Advanced for additional selection criteria including automatic bracket detection and selective processing Configure advanced options by selecting Options In the Source frame select the location of the folder where your bracketed photos are The batch will arrange the files of this folder in alphabetical order It will process N files at a time N being the number you specified in step 2 If you want to save the results in a different folder than the folder containing your source photos select the Custom location option in the Destination frame at the bottom right If you leave the default option Created under source folder then the batch will create a subfolder with the name PhotomatixResults and will store the resulting images in this folder 5 In the Destination frame select the output file type 6 Click the Run button to start batch processing While the batch is running the results area below the Run button will display the processing done Photomatix Pro User Manual Page 21 4 2 Settings specific to Batch Processing The Settings buttons allow you to specify the settings for HDR generation Tone Mapping and Exposure Fusion Please refer to sections 2 and 3 for a description of these settings In the case of the settings for Generate HDR there are a few settings that are specific to Batch
34. then save it 2 The Tone Mapping Preview window provides a preview of what the image will look like once the Tone Mapping has been applied to the entire HDR source image and includes options to adjust the size of the preview Note that in the case of the Details Enhancer method the preview is not always an accurate representation of the final tone mapped image Photomatix Pro User Manual Page 8 2 2 1 General controls The image adjustment controls are specific to the tone mapping method activated and are described in the next subsection The Tone Mapping Settings and Preview dialogs include additional general controls which apply to both tone mapping methods Preview size The radio button across the top of the Preview dialog let you choose between two or three sizes for the preview related to the size of the original For instance 1 4 means that the size of the preview is one fourth the size of the original HDR image The Preview Magnification control allows you to scale the selected size upwards by the given percentage up to 199 Show Original Show Preview Show Original lets you quickly toggle back and forth between a preview of the tone mapped image the default and the original non tone mapped image Show Original Use this to compare the effects of your changes with the original Floating Histogram The tone mapping Histogram is a floating window that contains four selectable tabs to i
35. tting Set the camera to Auto Exposure Bracketing AEB f possible use the camera s self timer setting or a cable release to minimize camera shake Set the exposure increment to 2 for optimal exposure range If your camera does not offer 2 exposure increments select the maximum possible Consult the camera manual for model specific instructions for choosing this setting Photomatix Pro User Manual Page 1 Section 1 Taking photos for HDR Note The continuous shooting mode may not always be the best strategy because camera shake may build up We recommend using a method that ensures the least possible shake for each single shot e g mirror lock up functionality if available OZ AEB Flash exp comp WB SHIFT BKT Custom WB Color space Picture Style Dust Delete Dat Canon Rebel XTi 400D LCD showing AEB with 2 increments selected Photomatix Pro User Manual Page 2 Section 1 Taking photos for HDR 1 2 Selecting the exposures To get good results with HDR processing your capture sequence must include photos that correctly expose highlights and photos that correctly expose shadows The latter is especially important to avoid noise showing in the processed HDR image In the lightest photo of the sequence the darkest shadows should be at least in the mid tones You can check that with your camera s histogram preview in playback mode In your most overexposed photo the left part of the histogram
36. verters Even though Photomatix Pro can process RAW files from most camera models we recommend converting RAW files using a third party RAW converter Such as Photoshop Lightroom Aperture DxO or other applications specialized in RAW conversion before processing them in Photomatix Pro When a third party RAW converter is used RAW images should be developed with the following settings the screenshot shows the settings in Lightroom e WB White Balance Same WB for all source photos e Basic settings Should be all set to 0 Auto e Curves Both Parametric and Point Curves should be linear Linear Photomatix Pro User Manual Page 25 5 4 Dealing with noise When you process your images using Exposure Fusion the fused image will tend to show less noise than the source images This is because Exposure Fusion works by directly combining your bracketed photos and thus averaging out noise However when you create a 32 bit HDR image your bracketed photos are assembled in linear space into an image that spans the full range of luminance values captured by the camera If the lightest photo of your exposure sequence is not bright enough to expose the shadows of the scene then the noise in the source photographs will be transferred to the HDR image Noise in the HDR image will then be made more apparent by tone mapping especially with Details Enhancer as this tone mapping method increases local details Though Photomatix Pro
Download Pdf Manuals
Related Search