iPower Case manual 2.6.12
Contents
1. charging ports Doing so may cause permanent damage to the ports device or cable 8 Do not wash with harsh soaps detergents or chemicals 9 Over an extended period of non usage the iPower will begin to discharge less than 5 overtime Charge at least once every three months when not in use 10 Misuse of this product may result in damages that are not covered in the one year limited warranty 11 Please see the One Year Limited Warranty on the back of this manual for further information 12 All parts of this product including its accessories are limited to the use of the product 13 The developer and manufacturer of this product have the right of interpretation determination and revision of any and all of the above2. iPower 4 4S For iPhone 4 4S USER MANUAL Welcome Thank you for purchasing the iPower Case for iPhone 4 4S Please read the user manual carefully before use iPower Charge your iPhone in your pocket Battery Consumption When iPhone and iPower case are connected to any power source the power source charges the iPhone first When the phone is charged up to 80 the power source then charges the iPower case If the power source is cut off iPower case becomes the main power supply if the unit is in charge mode until it is less than 5 then the power is supplied by your iPhone On amp Off button To turn on the Power press the button on the back and the iPhone will make an audible sound that you re charging To turn off the iPower hold down the On Off button 3 seconds and release To ensure you re not still charging check your iPhone battery it should not show a charging icon Performing this feature will allow your iPower to provide full backup power when needed For best results charge your iPhone in the iPower nightly and only activate your iPower case when your iPhone s battery power is at the halfway point Camera Flash When using flash on the camera for best results remove the top cap of the iPower Sync fa iPhone is inserted in iPower you are able to synchronize your iPhone with iTunes or other applications without removing the iPhone from the iPower case It is recommended to use the
3. original included micro USB cable as other cables may not work properly CMYK iPower Case 1 LED Indicator 2 On Off Button 3 Camera opening 4 Top cover 5 Micro USB input port Package Contents Included iPower Case for iPhone 4 4S Micro USB Cable User Manual LED lights Indication Press the button to indicate iPower Case power status LED 1 4 Lit 80 100 LED 1 3 Lit 60 80 LED 1 2 Lit 40 60 LED 1 Lit 20 40 LED 1 flashing Less than 20 FAQ What are the best charging methods Connect using USB cable that came with iPower case Can be plugged in to your computer or any wall plug power source You can charge the device with the iPhone inserted or indepen dantly How many charge cycles do I get with iPower Rechargeable for over 500 cycles avg Will always double the battery life with iPower We cannot guarantee you will double the battery life The amount of additional power depends on a variety of factors different for every user For additional FAQ and support visit www ipowerup net Specifications Product name iPower Case Cell type Li polymer battery Input DC 5 0V 500mAh Output DC 5 0V 500mAh Capacity 1700mAh Dimension 2 46in x 4 98in x 0 72in Weight 3 10z Compatibility iPhone 4 4S Standby time Up to 210 hrs Talk time Up to 3 5 hrs 4G up to 5 hrs 3G Internet use up to 4 hrs 3G up to 7hrs Wi Fi Audio Play up to 28 hrs Video Play up to 7 hrs Hots
4. pot usage up to 3 3 hrs 2 devices Charging Instructions 1 Use the included micro USB cable to charge the IPower for the first time from USB port or wall charger 2 Charge the iPower device with the iPhone inserted and it will charge both devices In this operation the power source will charge your iPhone first until full then will charge the iPower LED light indicators light up progressively when iPower is charging When all 4 lights are illuminated no flickering both devices are fully charged 3 The iPower will charge your iPhone 4 automatically upon insertion and detection of iPhone s battery status After pre charging your iPower amp Phone use the ON OFF button to save the charge for efficient long term usage when mobile Warning Read all instructions and warnings prior to using this product Failure to do so could result in fire explosion electrical shock or other hazard causing serious and or fatal injury and or product damage 1 Do not modify disassemble open drop crush puncture force or shred the product 2 Do not expose product to rain or water 3 Keep away from open flame or heat 4 Keep away from high voltage devices 5 This product is not a toy keep away from children Ensure that all persons who use this product read all instructions and warnings 6 Only use the adapter with outlet voltage of 4 75V 5 25V or computer USB port to charge the product 7 Do not force the plug in
Download Pdf Manuals
Related Search