Home

Tracking System Server TSSR 3.1

1. STAR NETWORK TECHNOLOGY LIMITED TSSR 3 1 Tr acking System Software for Web Ser vices Proprietary Notice and Disclaimer Unless otherwise noted this document and the information herein disclosed are proprietary to Star Network Technology Limited SNT Any person or entity to whom this document is furnished or who otherwise has possession thereof by acceptance agrees that it will not be copied or reproduced in whole or in part or used in any manner except to meet the purposes for which it was delivered The information in this document is subject to change without notice and should not be construed as a commitment by SNT Although SNT will make every effort to inform users of substantive errors SNT disclaims all liability for any loss or damage resulting from the use of this document or software described herein including without limitation contingent special or incidental liability Copyright 2005 Star Network Technology Limited License Agreement Read this agreement before opening the software Once you have removed the software from its envelope or downloaded from the SuperGuard website you have accepted the agreement USAGE RIGHTS Your rights with respect to the Software are non exclusive The software may only be used by one user on one computer at a time The software may be transferred to another computer as long as it is only used by one user at a time The Software and its documentation may not be copie
2. To receive alarm notifications when the device exceeds a predefined speed limit you can setup a Max Speed limit Enter the speed in km h or enter 0 km h to cancel a speed limit In the GPRS USID field enter the GPRS user name or ID for GPRS connectivity if required to enable GPRS services with the SIM card used in your GPS device In the GPRS PWD field enter the password for GPRS connectivity if required to enable GPRS services with the SIM card used in your GPS device In the APN field enter the Access Point Nod address required to use GPRS services with the SIM card used in the GPS device Please ask your GPRS service operator to provide this information In the GPRS Dial field enter the GPRS dial number required to use GPRS services with the SIM card used in the GPS device Please ask your GPRS service operator to provide this information User Name Dean Phone Number 18175554321 Contactl 18175554567 Contact2 Contact3 GSM Serivce NO 18175000000 Control Center 13760252803 v Max Speed __ 145 GPRS USID 3393200521 GPRS PWD APN internet voicescream com GPRS Dial NO oor Email dean trackmenow com Spare Account 477 8 Submit Main Menu 117 To be able to retrieve your login password by e mail in case it has been lost you can enter your e mail address in the Email field In the Spare Account field you can view the amount of credit remaining on your SMS acc
3. To test the Hot Start time of the GPS module in the device click Restart GPS To test the functionality of device buttons or inputs press at the relevant button 106 sate O TIFF OSac HorStet OS z SSM Signal Longuda Bog Diagnostic ai eee button Stop Dwgrostie Rentat GP Jpgrade Online Firmware Upgrades At times you might get notifications from your service center to download newest firmware upgrades for your device Click Upgrade to start to send a command to the device to go GPRS online and start downloading the new upgrade package from the server You will be able to view the download status in the Upgrade status bar After successful download and installation of the new firmware the device will restart and return to normal operation mode NOTE During the period of downloading and upgrading a device all alarm functions and tracking features will be disabled Upgrading a device might take 10 to 15 minutes After completion all original configurations will remain in the units unless otherwise stated in the firmware release notes Vehicle Security and tracking schedules will also resume after completion and automatic restart of the units If the upgrade process has been interrupted or GPRS connection gets disconnected for any reason the devices will restart and resume working with the original firmware version You are able to repeat the download process at any time 107 29 Using the Mo
4. Choose a time interval between 1 45 min in which you like the GPS module to power on and get GPS fix The module will stay on for approximately 1 minute to get positions and return to sleep mode Click Apply Device Settings to send the setup parameters to the device 92 Activate or Disable Vehicle Security AVL models If you have purchased a GPS Vehicle Security device and been logged in to the Vehicle Tracking Web you can activate or disable vehicle security of your device online Security fa oF Data Storage co 8 Da Click the Arm button to lock the doors of your vehicle and activate security features Click the Disarm button to disable the vehicle security system this command will not oF automatically unlock vehicle doors Setup GPS Storage Sequence AVL models For GPS Vehicle Security devices that are able to store GPS data into their memory for uploading at a later time you can setup storage intervals in the Vehicle Tracking Web GPRS required Set the time interval between 60 2250 seconds in the Store Data every sec field Click the Start Storage button to setup the storage sequence the vehicle unit Click the Stop Storage button if you wish to stop the vehicle unit from storing GPS information to its memory E3 To let the vehicle unit upload its complete GPS data storage to the location database click Upload Storage This command will let the vehicle unit go GPRS online and all GPS 23 data sto
5. TRACKING Man gaw SH Prarie tet ee eh er HOUMA Dg THNeTy Ha megane AL moara UMIDM STAT jan Supt Pane e z TAI ME MOR 0 Ma 0 mh 0 E 0 Mm 0 mm Dmg bv BRE Tracking History mpal F anayeoa a coms iaae ATONAL GALLE MY OF ANY wii Pont OTTAWA nano U carro SMALL UES etna THRE cmb BPE LEDUEITT Reveding SMOfene BOE Beeld Ratton Cirborsi Correre Pewert an EE E E Dmna Jefferson As me mioca ed To stop tracking in Real Time Tracking mode click Stop Real Time Tracking The rx device will go offline and discontinue sending GPS data The dot in the map will turn ca grey to signal when the device is offline NOTE The Real Time Tracking mode will not automatically stop when you exit your browser window or turn to other work During Real Time Tracking your device will continue sending data over GPRS until you have stopped Real Time Tracking Please make sure the device is GPRS offline before you shut down Internet Explorer 100 Viewing the Tracking History of Your Device To view the history of GPS data stored in the location database at the service center displayed as a colored line you can use the Tracking History feature from your Tracking Website Tracking History Start Time 2005 M4 M6 M 21 VIO 46 End Time 2005 4 V6 21 Vi 19 4614 ow History 9 Hide Geo Fence al Select a Start Time to define which date and time
6. About connects to the Online Upgrade Server to receive TSSR 3 1 updates displays current software version and installed hardware upgrades Main Toolbar Overview SHKA S amp BH Aletwhenin 7 Washington B aia FRG amp Pal y UR VA FERE H AE CART amp 10 The Print tool allows you to print the current map or map extent on a printer The Export Map tool allows you to save the current map or map extent to a Bitmap bmp file The Point tool changes your mouse cursor from functional tool to default pointer The Zoom In tool lets you select and zoom into a map area The Zoom Out tool lets you zoom out from a map extent The Pan tool lets you grab and move the map The Full Map tool lets you view the complete map The Measure tool lets you manually measure distances in map The View Status in Area tool allows you to view the device status and information of all selected tracking objects within a specified area The Show amp Draw GeoFence tool lets you show and define Geo Fence areas for selected devices The Hide GeoFence tool lets you hide all Geo Fences displayed in map The Remove GeoFence tool lets you remove Geo Fences settings for selected devices The Geo Fence mode lets you select the options for Geo Fence alerts In for inbound alarms Out for outbound and In Out for border crossing alarms The map menu lets you select maps from the local map database or ArcSDE dat
7. Battery Low Shows if battery power is Completed Shows if an event has been low accepted at the operator side Shock Shows if the vehicle is being Version Displays the actual firmware moved in armed status version of the device 16 Eagle Map Overview The Eagle map window shows the position of the PonnsyWenta Rs current map extent from the main map in a lower zoom p ON aie level making it easier for you to know the overall A T Mayla location of a current position on the main map Use the i Vie k erginia mouse to pan and move the current map extent Ta EagleMap la Everts Ge Sts Events Window Overview The Events window allows you to follow all incoming iD information in order of their appearance Information GPS Sent The table includes Device ID information and details of the events and date and time of the event To change the arrangement of the table order click the headers Double click a table row to show the tracking object in the map Tia EagleMao Everts A sms The Event Log will only show events happening in the current session of the program If the TSSR 3 1 program is restarted former events can be searched and viewed in the History Log SMS Window Overview The SMS window will show all SMS text messages received at the Control Base Details include sender message text and time Bern Fron Metsage Sent Time lt Ts EagleMap J Evers E sms 3 Tr
8. SMS charges will be billed to the relevant user accounts of the device for which the text message has been sent From the Control Panel select the device from the Device ID menu In the Phone field enter the phone number to receive the SMS text message Message ID poo00001 MaE DILE sms Phone 181 75554321 Create the text you want to send in the SMS editor window and click Send Message to send the message to the recipient i 78 19 Online Software Updates and Upgrading Devices From the Tracking System Server you are able to receive software updates over Internet and new upgrade packages for GPS device firmware Personal Tracker and Vehicle Units can be upgraded wireless over GPRS GPRS connection from the devices required Download and Installation of Software Updates To connect to our Online Upgrade Server and receive software updates and new firmware packages for GPS devices go to Help menu Online Upgrade You will be asked to confirm that you want to shut down the program and start upgrading Click Yes to proceed The download and installation will begin shortly If Internet or server connection is not available at the time a message box will appear If the download and installation of the software upgrade was successful the Tracking System Server program will start automatically To know the current software version and check which firmware upgrade packages have been installed in your Tracking S
9. Website Tracking Panel Overview 20 Website Search Panel Overview 19 Website POI Creator Overview 22 Website Device Setup Panel Overview 23 Website User Data Panel Overview 25 Website Status Window Overview 26 4 Mobile Website Basic Functions 27 Mobile Website Main page 27 Mobile Website Map Page 28 Mobile Website Search Page 29 Mobile Website POI Page 30 Mobile Website Geo Fence Page 30 Mobile Website Device Setup Page 31 Mobile Website Device Status Page 32 Mobile Website Password Page 32 5 Glossary 33 6 Installation Preparations 34 Recommended System and Hardware Requirements 34 Software Requirements 34 System Preparations 35 7 Installing the Tracking System Software 26 8 Configuring Modem Connections 41 Preparing GSM Connection 41 Preparing 56K Modem DTMF Connection 41 Modem Configuration 42 9 Configuring Internet and Data Connections 46 Configuring GPRS Socket 46 Configuring Internet Map Server Connection 47 Configuring Simple Web Server Connection 48 Adding Maps to the Local Map Database Mapping Options 49 Configuring User Database Connection 51 10 Adding Users to the Database 52 How to Create User Entries 52 Other User Archive Features 55 11 Initializing GPS Devices 56 Setup Geo Fence Areas for a Device 57 Setup Power Saving Modes 58 Setup GPS Storage Sequence for a Device AVL Models 59 12 Using the Map Tools 60 13 Using the Search Functions 62 Searc
10. type of map layer you want to search for Select All Layers if you want to search the complete GIS database The types of information may vary from map to map depending on availability and detail level of the GIS data from the map database In the field Search Key enter the name or parts of the name of the search object The more accurate and complete the name you entered is the faster and fewer are the search results displayed in the Search Results box th Click the Start Search button to start the search The Search Results box will display all places or objects from the GIS database matching the search criteria and contain the name you have entered Select and double click a result from the Search Results box The map window will open the appropriate map extent and the search object will appear flagged with a callout box 62 POEM nc ac moat paar ns SEE Sa e ERTS aL teen rrer FT ps teve i t yipuu r i h z foorh Paio N A potra rrr oan e PAIA N 4 Lio Goeth Lee ra Laa x 77A s pase VETERANS ME be aes SAROHA 5 OE LOE AMACA Gem Mar Roce i Vee sae pana apa mear mms i a anaita n OGRE T er a BE Kiar yo aea uneCee 1 S ee eee Pr yi ae ore q eat Pie efit M rrn POATA MEM Cm or See gt mamira tepi ae eek en laii fae ste D ere 8 lt A x To search for other places or map objects repeat the steps as described above All search objects found in the map will remai
11. 0 aosan Jeder 0008009 20044270 omoes PETRI DIA Tede Diten KITOE Y Paire Fehe Tree Paine Faise Tree Paise Device Status Log History Log Control Panel a a or come meto 4 oon Wh rw To onan mnn To a B mwn mewe stanet ryewraga 1 zianian p xew IOI Ra H ow B fewest THROES n i E ome iboe Fn Prerna New Let Thea Tracing Hintory in Map mide Tub mg Hhitep os Map Beckie Dwabere bae ishare Fowo Fave Fare Dew 1 Fase Fuse Fave eon Eagle Map Events SMS Viewer Main Menus Overview File Print File Export allows you to print the current map extent on a printer allows you to save the current map extent to a Bitmap bmp file File Exit lets you exit the program and end all activities Map Tools Point Map Tools Zoom In Map Tools Zoom Out changes your mouse cursor from functional tool to default pointer lets you select an area to zoom into the map lets you zoom out from a map area Map Tools Pan lets you grab and move the map Map Tools Full Extent lets you view the complete map Map Tools Measure Length opens tool to manually measure distances in map Map Tools View all Status in Area allows you to view the device status and information of all selected tracking objects within a specified area Map Tools Show and Draw GeoFence opens database to select device and lets you
12. Click Submit to save the point and label to your database Click Return to return to main page To edit the name of a POI you created click Edit POI ESI Find the POI to be renamed in the map and select through mouse click In the POI Label field change the name of the POI you selected and click Change Click Return to return to main page To move a POI to a different location click Move POI Le Find the POI to be moved in the map and select through mouse click Click at the new location to move the POI To delete a POL click Delete POI Find the POI you want to delete in the map and click at it To search and display POIs from your database enter a search key PO CREATOR Point OF interest Ss 2 Search For POI Key o Show AIIPOI Hide All Show Currert Postion and click Start Search GM Select from the search results and double click to view the POI To show all POIs in the map click Show All POI To view all Geo Fences loaded to the device click Geo Fence To hide all POIs and Geo Fences displayed in the map click Hide All To revert to the current GPS position centered on the map click Show Current Position The SMS Editor allows you to send SMS text messages to any GSM phone number Type the text into the text field enter a phone number in the No field and click Send Short Message to send the SMS SMS charges will automatically be billed to your user account 22 SMS EDITOR
13. Company Name and Serial Number from the CD ROM into the empty fields Install the Tracking System Server to your PC Close all applications on your PC server Locate the TSSRSetup exe file in the TSSR 3 1 Setup folder Double click the TSSRSetup icon to start the installation Follow the instructions on your screen 7 In the Choose Location box confirm the destination folder for the Tracking System Server software or click Browse and select another folder to install Tracking System Server 8 If you install the Tracking System Web Server for the first time on your PC or server choose Typical Installation and click Next to continue 6 The InstallShield Wizard will guide you through the complete Setup process 39 9 During the installation process Setup will add program icons to the Windows Start Menu and Desktop Program Icon E 10 If the installation was successful the InstallShield Wizard Complete box will appear Click Finish to complete the installation of Tracking System Server 11 If you install Tracking System Server for the first time on your PC or server you will need to restart your Windows operating system to complete the installation 12 To make sure that your Tracking System Server software and included device firmware upgrades are up to date please run the Online Upgrade from the Help Menu after you start Tracking System Server for the first time Make sure to ru
14. From the Mobile Website you are able to setup Geo Fence boundaries in order to receive alarm messages whenever your GPS device in or out of the defined area From the Main Page press Geo Fence if you like to create a Geo Fence around the current GPS position of the device If you like to setup a Geo Fence around a location from the map go to Search Page and search for the location Press Set as Geo Fence to define an area around the location you selected in the Search Results box After opening the Geo Fence Page enter a distance in meter in which you would like to setup a Geo Fence around the device position or location This will create a square shaped Geo Fence around the position or location Choose between the Geo Fence modes In To let the device report with an alarm when it enters a restricted 45 M area Om Out O Out To let the device report with an alarm when it exits from a OInOut predefined area Search Result as GeoFence In Out Current Poston as To let the device report with an alarm when it crosses the border GeoFence of a predefined area Geo Fence 1 Press Search Results as GeoFence to setup and load your GPS device with the Geo Fence around the location you have found in th h Page G e Search Page Show Geo Fence ti J Press Current Position as GeoFence to setup and load your GPS Man Menu device with the Geo Fence around the last known GPS position Every time you have setup a new Geo Fence a new
15. GPS Tracking device required for GPS GPRS Tracking units In the GPRS UID field enter the GPRS user name or ID for GPRS if required to enable GPRS services with the SIM card used in the GPS Tracking device optional for GPS GPRS Tracking units In the GPRS PWD field enter the dial in password for GPRS if required to enable GPRS services with the SIM card used in the GPS Tracking device optional for GPS GPRS Tracking units In the Vehicle Type field enter the type of vehicle in which the GPS Vehicle Tracking unit is used optional In the EngineNum field enter the engine number of the vehicle in which the GPS Vehicle Tracking unit is used optional To select a color matching the vehicle color in which the GPS Vehicle Tracking unit is used double click the Vehicle Color field and choose from the color palette optional In the ChassisNum field enter the chassis number of the vehicle in which the GPS Vehicle Tracking unit is used optional In the Email field enter the user e mail for login password retrieval optional Inthe Address field enter the address of the user optional Click OK to save the all user entry details or changes you made to the user database or click Cancel to leave the User Archive manager without changes Other User Archive Features Click Archive Settings from the toolbar or go to the Archive Settings Manager in the Menu to open your user database Arhive 5M3 Seinos GPRS Ostata
16. MEMORIAL Go Straight 173m Turn Right ARLINGTON MEMORIAL Go Straight 809m Turn Left GEORGE WASHINGTON MEMORIAL Go Straight 11m Turn Right STATE HWY 27 Go Straight 2117m Turn Left JOYCE Go Straight 25m Turn Right I 395 Go Straight 2539m Turn Right RAMP Go Straight 17m Turn Left I 395 Go Straight 6755m Turn Straight 6755m Turn Right EDSALL Go Straight 3890m Turn Left CLIFTON Go Straight 86m Turn Right NEW HOPE Go Straight 115m Turn Left BLACKSBURG Go Straight 209m Turn Right INDEPENDENCE Go Straight 105m Length 16851 Washington Y Change Map Main Menu 111 Using the POI Creator From your Mobile Website you are able to create and label own points of interest POD in the map that will be stored to your personal database To create a POI at the last known GPS positions press POI from the Main Page To add a POI from the search results select the location from the Search Results box of the Search Page and press Set as POI You will be connected to the POI Page In the Name field key in a name you want to give this point e g Office Home School etc Press either Search Result as POI if you have selected from search results or Current Position as POI if you want to set last known GPS position to save the point and its name to the database You can add and label as many points of interests as you like Press Show POI to view all points of interest in the map To sea
17. PENNSYLVANIA A Go E Straight 1168m Tu rn Left EXECUTIVE Go Straight 264m Tur n Right ELLIPSE Go a Length 4981 m To find routing information starting from the last known GPS position of your GPS device click From Current Position Click Search Result as Start if you want to calculate a route starting from a search cD result you marked in the Search Results box 97 Make a search and click Search Result as End if you want to calculate a route ending at the search result you marked in the Search Results box Click Use Mouse Set Start Point to manually set a point in the map from which you want to calculate a route In the Map Window point at the location and click to set the start point Click Use Mouse Set End Point to manually set a point in the map to which you want to calculate a route In the Map Window point at the location and click to set the end point Check if you want to calculate the Shortest or Fastest route between start and end point Click the Calculate Route button to start the route calculation The result box will display the complete routing information shortly containing street names directions and distance length to the end point in meters At the same time the map window will load a map extent showing the complete route from starting point to end point marked with a red line ga VEHICLE TRACKING WEB SEARCH MAP Cet WA DHE lea GFE TOET Bedae Iiae BOE doeii Dai Gaa Bres
18. Straight 86m Turn Right 00000001 es lt SSS cee g Hertew me Cowes 4 OE NT AND Reeth reres 3 amoi Paia MOMS E Dw Dirtaeca ic DIO Mogote Mengen Device ere Hate AP Fen n htop Select a device from the Device Status Log and click Set Current Position as Start if you want to calculate a route starting from the current GPS position of a tracking object The Device ID will be displayed in the Navigate Device ID field above result selected from the Search Results window Click Start from Search Result if you want to calculate a route starting with a search l3 64 Click End at Search Result if you want to calculate a route ending at a search result selected from the Search Results window Click Click in Map to Set Start to manually set a point in the map from which you want to calculate a route In the Map Window point at the location and click to set the start point Click Click in Map to Set End to manually set a point in the map to which you want to calculate a route In the Map Window point at the location and click to set the end point o r e Click the Find Shortest Path to start the calculation The Shortest path box will display Ea the complete route information containing street names and total distance in meters Ne At the same time the map window will open a map extent showing the complete route from starting point to end point marked wi
19. TrackMobile Allow Read and Run Scripts and finish the Wizard Your TrackMobile Website shall now be included in the Default Web Site list To start and publish your Web Services right click Default Website and choose Properties In the IP Address field select All Unassigned from the generated list Apply and click OK to confirm From the IIS toolbar click the Stop Item button W Press the Start Item button gt to put the services into effect 4 Install Runtime features for TrackMobile and TrackWeb services Copy the complete folder runtime from the TSSR 3 1 Setup folder to the wwwroot directory assigned to your Internet Information Services IIS e To check up on the assigned wwwroot directory go to Control Panel Administrative Tools and open the Internet Information Service manager e On the folder list to the left open local computer Web Sites Default Website e Right click Default Website and choose Properties Select Home Directory to view the Local Path in which wwwroot can be located usually Dir Inetpub wwwroot Search for the destination folder wwwroot from the directory on your hard drive and copy the runtime from the TSSR 3 1 Setup folder into it 37 38 Click Accept and Next to continue when you see the dialogue boxes for License Agreement and Information text In the Customer Information box enter your User Name
20. View Size View Size Search Place Search Place opens the Search Page with options to search for Clear Found locations and route planner Path Path and Length will display results generated from the route Length 0 planner Clear Found hides all search results routes Geo Fences or Washington v POIs displayed in the map Change Map To change a map provided from the Control Base choose a maj Main Menu s BE p from the map field and select Change Map 28 Mobile Website Search Page The Search page enables you to find locations streets or other objects on the map Type All Key Search Place Total O Page 1 Go Shortest O Fastest Set as start Set as end Set as PO Setas Geo Fence Man Menu In the Type field specify the layer or type of object to be searched In the Key field key in the name or parts of the name of the object you search Press Search Place to start the search The search results window will display the names of all places beginning with the name entered in the Search key Choose from the list and select Show Place to return to the Map Page and view the location on the map To scroll through the complete list of search results you can either key in a page number and select Go or scroll page by page using Prev and Next To use the route planner choose between Shortest or Fastest route to define the calculation method Use Set as start to choose the search result as starti
21. and time zone settings of the PC you are using at this moment SPEED The speed recorded at the last known GPS position in km h GPS GPS availability at the time of the last data entry or event If unavailable the position shown in the map and DATE TIME information might be incorrect SOS The alarm icon will flash red if an SOS emergency call had been triggered SPEEDING The alarm icon will flash red if a maximum speed violation has been recorded GEO FENCE The alarm icon will flash red if a Geo Fence alarm has been recorded The second line in the Status Window will show street name and nearest intersection of the last recorded GPS position If no street level data is available for the position the location will be shown in Longitude Latitude 102 The following information can be viewed from the Vehicle Tracking Web TIME Kmoh GPS SECURITY Speeding GEO Fence SOS Accid Battery CarMoved DoorOpen PowerCat sooo YK vVvvsevves Dean is in Jefferson Ave near intersection 3rd TIME The actual date and time of the last known GPS data calculated for the time and time zone settings of the PC you are using at this moment Kmph The speed recorded at the last known GPS position in km h GPS GPS availability at the time of the last data entry or event If unavailable the position shown in the map and DATE TIME information might be incorrect SECURITY Shows if vehicle security has been activated or disabled SPEEDIN
22. events in order of occurrence will appear To open the History log in a new individual window click Expand From the Time menu select the time period for which you want to view entries and events from the device status database From the Device ID menu select one device or select All Devices to view the complete log for all devices from your database GPS Qeon 46 0009 11 Sa de ce 2007 04 OF SREP mater tad From the Status menu select if you wish to view the status history for entries that have been eane a SEARLS OP AEP OF VEME ae Hon rest Fare reported as events no event entries or all entries from the database Corgit The mares Dm ne Tuaagriupnn From the Event Completed menu filter the database from those entries that have events accepted arera by operators completed and those entries that have not been accepted not completed yet Decor 0 xere asi Cormmand 8 Hiao BA Seach ail gt Vehicle Staa i Hinon Ra J All Vehicles ta E J 15 minutes amp i hour 3 hours bore Tree Fase False r Pagel Totat 7 Paget Te Paha bre Paro Half day 1 day amp 1 week Ea 1 month 23 12 22 9532 77200 95307 Any 947 273 122002 95220 n2200 951 54 2312 200 FI De 2245 TIOTI ONST a HH0088 SSSRR RES o w Bail gt ai Status gt hee l i x Not Completed Show Teacking Hator in Map 7 Fay Has Event Completed Ha
23. exceeded the amount of time To use the IE Tracking Website from the Simple Web Server you only need to connect to http host_IP_address host_Port_Number from any workgroup computer with Internet access or external computers if fixed IP address is available All requests can be viewed in the Visitor Monitor Window in the Web Server manager Click Clear to remove all request entries from the Visitor Monitor Window 48 Adding Maps to the Local Map Database If you don t use ArcSDE ArcIMS map database services to maintain your map data you are still able to use digital maps for Control Base and Internet Web services from your local map database Please note that mapping performance of the local map engine will depend on map size and hardware capacities of your PC server To run Route Planner calculations on the local map engine incorporated in the Tracking System Server all map topology data has to be loaded into the RAM memory from your PC Server To add maps to the local map database remember the location of the map folder to be added on your hard drive and do the following steps 3 From the application toolbar click Add Map or select Add New Map from the Map Tools Menu Locate the XML file from the map folder with the new map Double click the XML file to load the new map into your map database After some seconds the new map will be displayed in the Map Window and ready to use for operators and onli
24. in or from a tracking device out or search map layers for containing GPS data contents Longitude Latitude Velocity Time event and activity indicators Geo Fence A restricted user defined Operator A person or team authorized to geographic area If a GPS operate and control the software device leaves or enters the and server features predefined area an alarm is administrate user accounts and triggered incorporate additional services GIS Geographic Information SMS Short Message Service System A Geographic Mobile phone text service that Information System is a lets operators and users send combination of elements text messages and commands designed to store retrieve through GSM cellular network manipulate and display geographic data information about places GPS Global Positioning System A User The customer or subscriber system of satellites that using products and services transmit continually which provided by the operator make it possible to locate tracking objects within an accuracy of 15m through a receiving unit GPRS General Packet Radio Service Tracking A GSM GPRS GPS enabled A GSM data transmission Device unit that is able to receive store technique able to transmit and transmit GPS data data rates from 56 up to 114 recognize and implement Kbps Users pay only for the commands and perform various volume of data sent and security and safety functions received GSM Global System for Comm
25. key in the name or part of the name Select Begin Search to search the database From the search results choose the POI and select Show POI to view the POI on the map To delete a POI from the database choose the POI from the search results and select Delete POI To rename a POI choose the POI from the search results and select Edit POI Label Type in the new name in the Name field and confirm with OK Mobile Website Geo Fence Page The Geo Fence page enables you to create square sized Geo Fence areas around current GPS positions or search results and load them to your GPS device M Ol Out Ona Search Result as GeoFence Current Position as GeoFence Geo Fence 1 Show Geo Fence Delete Geo Fence Man Menu 30 To create a Geo Fence around the current GPS location or search result define the distance measured in meter in which you would like to create the Geo Fence area from the point of origin as center Select from the Geo Fence alarm modes In for inbound alarms which will trigger an alarm message when a device enters a restricted territory Out for outbound alarms which will trigger an alarm message when a device exits a territory In Out to trigger an alarm message every time a device crosses the border To submit and load the Geo Fence to the device press Search Result as GeoFence or Current Position as GeoFence All up to four Geo Fences will be listed in the Geo Fence window T
26. map features receive positions from your devices control device settings and configurations and manage your user account Please note that your service center might have setup a time out function to the Tracking Web service causing the Web site to expire after a period of inactivity Please return to the Login page to re login to your service if an expiration message appears To return to the login page you can use the Home button on top of the Tracking lt j Website To print out or save a map extent displayed on the map window click Print Map S A new pop up window with the map extent will appear shortly along with printer options to choose from 86 23 Managing User Data and Initialize Devices from the Tracking Website Initializing Your GPS Device Before you can start locating and tracking your GPS device and view positions on the Tracking Website you will need to complete your user account setup and device configurations for SMS GPRS and contact number list NOTE To configure your GPS Device the device must have been properly installed and powered up prior to initialization For the initialization process GSM network with adequate signal strength at its location is required To enter or edit user information and device configurations click the User Data button in the function bar All user information you submitted will be automatically updated to your account at a secure database of your service center I
27. messages in text mode Click Accept to bring the changes into effect If you want to use SMS over IP services please contact our customer service or hotline to receive customized setup features for these services SMS Cost allows you to define charges for each SMS send from the SMS terminal at the Control Base All SMS costs will be deducted from the credit amount entered in the User Archive and only be billed to the user account when SMS commands or alarms were sent from the Tracking Websites or sent from the Control Base terminal on behalf of that user account If you wish to keep records of all SMS sent from the Control Base terminal as Excel file check Record Sent Out SMS Check Record Received SMS to keep records of all SMS received at the Control Base terminal To view the SMS records for all incoming SMS received locate the file SMSReceived xls in Dir Program Files Tracking System Tracking System Server Data To view the SMS records for all SMS sent from the terminal locate the file SMSRecord xls in Dir Program Files Tracking System Tracking System Server Data 45 9 Configuring Internet and Data Connections Configuring GPRS Socket To be able to exchange data packages between Control Base and GPS GPRS Tracking devices one Internet port has to be configured to allow communication through TCP IP Before you can use this port please make sure that it is not fire walled and uses a fixed IP connection F
28. panel select the Device ID and click Initialize GeoFence button to send the Phone 18175554321 command per SMS to the device Setup Power Saving Modes To reduce power consumption on GPS devices you can setup sleep configurations for GPS modules used in the devices You can setup the GPS to only start in case of alarms or tracking commands or let it start in time intervals to store positions instead of leaving it on power for all the time Open the Control Panel and select the device from the Device ID menu Choose from the power saving options GPS Always On default Saving The GPS module will stay powered on all GPS Always On the time scanning for GPS satellites and save positions continuously l GPS Always shutdown C Wakeuptime pg sec GPS Always Shut Down To keep the GPS module powered off It will only wake up if an alarm has been triggered or users send Location or Tracking A commands Time to get positions will take longer due to cold start of the GPS module If no GPS is available at the location of the device you will not be able to receive an actual position Initialize Saving Mode Wake Up Time Choose a time interval between 60 seconds and 2550 seconds 42 5 min in which you like the GPS module to power on and get GPS fix The module will stay on for approximately 1 minute to get positions and return to sleep mode Click Initialize Saving Mode to send the setup parameters to the dev
29. shall mark the starting point of the history track Choose a date and time from the menus or click at the date and time values to edit the time Select an End Time to define which date and time shall mark the end point of the history track Choose a date and time from the menus or click at the date and time values to edit the time Click Show History to view the Tracking History for the time and dates setup above displayed as a blue dotted line VEHICLE TRACKING WEB TRACAING Treching tarry se DE ime WS ETE wede HAm NA And iren dries Inston Heat ce ai ZBvVvvevVveV Desea Aeterna Ave reer morari ew 101 To evaluate if your device has violated any Geo Fences during its history you can display all available Geo Fence areas in addition to the History track by clicking the Geo Fence button To remove Tracking History lines and Geo Fences from the map click Hide All Status Window Information Every time you log in to the Tracking Website the map window will show the last known position of your device if available and date time device status information and location details can be viewed in the Status Window below The following information can be viewed from the Personal Tracking Web DATE TIME SPEED GPS SOS SPEEDING GEO FENCE BATTERY LOW 05620 0 VS 8 v y Carlo is nearby Longitude 000000000 Latitude 000000000 DATE TIME The actual date and time of the last known GPS data calculated for the time
30. tools select or press See Map 108 30 Map and Search Features of the Mobile Website Map Display Your Mobile Website comes with a variety of useful map tools and functions Opening the Map Page will load a picture of a map extent with the last available GPS position If the map cannot be loaded at the first attempt press Refresh to start the picture download again To refresh updated positions press Show GPS Position To zoom in or out of a map extent you can choose from eight preset zoom levels by selecting a level from the Level drop down menu and press Zoom to level Level 1 will zoom out to the full map while Level 8 will display the smallest available zoom level To zoom in or out of the map extent in steps press either Zoom In or Zoom Out until you reach the level you want to view To move through the map in half steps in different directions press either Up Down Right or Left You can adjust the display size of the map if your screen supports a bigger display resolution Select a Level and press View Size to change the size of the map extent The following resolutions are available Level 1 150 x 200 pxl Level 2 300 x 400 pxl Level 3 450 x 600 pxl Level 4 600 x 753 pxl Level 5 750 x 753 pxl Level 6 900 x 753 pxl Level 7 1028 x 753 pxl NOTE If you use GPRS to connect to the TrackMobile site please note that higher resolution levels will have impact on download size and speed If your service of
31. your PC Server Since this folder will be used as directory for the TrackMobile and TrackWeb Web pages please do not move or delete this folder after successful installation of the software NOTE If you plan to publish your Websites through ArcIMS server connection install the folders for TrackWebIMS and TrackMobileIMS to your IIS service instead 2 Setup Virtual Directory to publish Website TrackWeb Go to Control Panel Administrative Tools and open the Internet Information Service manager On the folder list to the left open local computer Web Sites Default Website Right click Default Website and choose New Virtual Directory During the Virtual Directory Creation Wizard create a name Virtual Directory Alias for your Website e g Track Web Enter path or browse for the directory TSSR 3 1 Setup and select the folder TrackWeb Allow Read and Run Scripts and finish the Wizard Your TrackWeb Website shall now be included in the Default Web Site list s a ae a r s s a 36 3 Setup Virtual Directory to publish Website TrackMoble Right click Default Website again and choose New Virtual Directory During the Virtual Directory Creation Wizard create a name Virtual Directory Alias for your Website e g TrackMobile Enter path or browse for the TSSR 3 1 Setup directory and select the folder
32. 000002 Jimmy Ample 00000003 Dean g 00000004 Perry Hotter If the upgrade process has been interrupted or 00000005 Dave s Truck g GPRS connection gets disconnected for any reason 00000006 Gary Elsvaer the devices will restart and resume working with the 9 00000007 James Bond original firmware version 00000008 Pitt Brad You are able to repeat the download process at any 00000009 Julia R time 00000010 S a To know if the upgrade has been successfully installed you can send a Get Location or Query Last Status command from the Control Panel Current Device 00000002 After receiving any GPS or status data from the device the Version field in the Device Status Log Upgrade MENEE and History Log will show the current firmware version installed in the unit 80 20 Testing Devices with the Diagnostic Program Operators can run a diagnostic program for GPS devices from the Tracking System Server in order to monitor and evaluate GPS availability GSM signal strength Hot start time to get GPS fix and check functionality of buttons on the device All information will be received through GPRS connection from the devices GPRS required In the Control panel select the device from the Device ID menu you want to test and click Diagnostic to start the diagnostic program ID foo000001 mE ISSA Phone 18175554321 Get Location _ Diagnostic H A new program window will open with fields for GPS satellite in
33. 04 09 05 0 False False False False 22 5412 1 1999 06 14 2 False False False False 24 996267 1 True False False False 0 0001 00000006 False True False False 00000007 False False False False 2 00000008 True False False Falte 00000009 False False False False 60 2003 12 The following entries to the Device Status Log will be made for every event Device ID Displays the device number Out of Area Shows if the vehicle violated from the user database a Geo Fence GPS Sent Displays the satellite time Request Shows if the request button GMT of the time of record of the Vehicle Unit has been pressed GPS Available Shows if GPS was available Speeding Shows if the maximum speed to the device at the time of limit has been exceeded record Door Lock Shows the status of the Power Removed Shows if main power source central door lock system had been cut car battery Active Shows the status of the car Latitude Displays the latitude from security system the GPS data Engine Off Shows the status of the Longitude Displays the longitude from immobilizer function the GPS data SOS Shows if an SOS call has Speed Displays the actual speed in been triggered knots from the GPS data Crash Shows if the vehicle has been Direction Displays the direction from hit or rammed the GPS data Door Open Shows if the doors have been Has Event Shows if an event has been opened in armed status recorded
34. D for GPRS activation access if applicable GPRS PWD lets you enter Password for GPRS activation access if applicable APN lets you setup the Access Point Nod to use online access with the device required GPRS Dial No lets you setup the GPRS dial number to use online access with the device required Email lets you enter e mail address for password retrieval Spare Account shows the credit from the user account available to send SMS commands Submit lets you initialize your device and synchronize user data information with the database at the Control Base Select Main Menu to return to the Main Page 31 Mobile Website Device Status Page The Website Status Window displays time GPS availability and all event reports from the device along with longitude latitude details Status information shown as true indicates that an event or alarm has been reported for this status 4 19 1 53 20 GPS On True Security True SOS False Out limit area False Speeding False Battery Low True Accident False Door OpenFalse Car Moved False Power Removed False Latitude 0 0 Longitude 0 0 Speedd Online Now False Refresh Man Menu GPS Sent Date and Time from the last GPS information received at the Control Base Security AVL models Shows whether vehicle security is active or disabled SOS Shows when the SOS emergency button has been activated Out limit area Shows when a GeoFence alarm has been triggered Spee
35. FTWARE FROM SNT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SNT does not warrant that the functions contained in the Software will meet all your requirements or that the operation of the Software will be uninterrupted or error free However SNT warrants the CD ROM on which the Software is furnished to be free from defects under normal use for a period of ninety 90 days from the date of delivery as evidenced by a copy of your paid invoice or sales receipt If the CD ROM fails due to neglect accident or abuse SNT shall not be liable to replace the CD ROM under this Limited Warranty SNT s entire liability and your exclusive remedy for a diskette not meeting SNT s Limited Warranty will be the replacement of such diskette which is returned to SNT or to an authorized dealer with a copy of your paid invoice In no event will SNT be liable for any damages including any lost profits or other incidental or consequential damages arising out of the use or performance of the Software even if SNT or an authorized dealer has been advised of the possibility of such damages This Limited Warranty gives you specific legal rights You may have additional rights if you entered into an individual license agreement or maintenance program with SNT In such cases the rights an liability features furnished to you will exclu
36. G The alarm icon will flash red if a maximum speed violation has been recorded GEO FENCE The alarm icon will flash red if a Geo Fence alarm has been recorded SOS The alarm icon will flash red if an SOS emergency call had been triggered ACCID The alarm icon will flash red if and accident alarm has been reported from the Crash Sensors if applicable BATTERY The alarm icon will flash red if the spare battery in the device is low CAR MOVED The alarm icon will flash red if the vehicle has been moved with security activated DOOR OPEN The alarm icon will flash red if the vehicle doors have been opened with security activated POWER CUT The alarm icon will flash red if the main power vehicle battery has been cut off or reaches a critical battery power 103 27 Using the POI Creator from the Tracking Website From your Tracking Website you are able to create and label own points of interest POTD in the map that will be stored to your personal database To open the POI Creator click the POI function button Point Of Interest Search For POI Key o o js To add a new POI to your database click Add POI Point in the map and click at the location where you want to create a point of interest In the New POI label field that appears enter a name you want to give this point e g Office Home School etc Click Submit to save the point and its name to the database The new POI and its name wi
37. Geo Fence number will be listed in the field below To view a Geo Fence area mark the number in the list and press Show Geo Fence to display it in the map If you wish to remove a Geo Fences and reinitialize the device you can do this by selecting the Geo Fence number from the list and then pressing Delete Geo Fence Press Main Menu to return to the Main Page 116 Device Settings To enter or edit contact numbers and device configurations press Device Setup in the Main Page In the User Name field enter or change the name for the holder vehicle or driver using the device This name will appear in all text alarm and location messages received from the device or service center on behalf of your account In the Phone Number field enter the GSM phone number of the SIM card used in the GPS device In the Contact 1 Contact 3 fields enter or change the numbers of the 3 contact persons authorized to send location requests and commands to the device and receive SMS alarm messages If the SOS emergency button has been pressed the device will automatically dial to the phone number set as Contact 1 In the GSM Service NO field enter the SMS Service Center number for the SIM card used in the GPS device Please ask your GSM service provider to provide this information The Control Center field shows the phone number of the service center it will be initialized to your GPS device for use with all tracking command and alarm features
38. RRY Reeds GFR eee B08 deed M D aa a moe BEVevuevveTT Demn e deter eee en ron ma eects Ded To search for other places or map objects repeat the steps as described above All search objects found in the map will remain flagged until you decide to hide all information Click Hide All Found to remove all flags from the map window Searching for a Near Place or Object From the Search Near Places menu select the type of information you want to search for Search Near Places Type HighWay v Tool MASSACHUSETTS Name AVE NE Distance 103 m Click From Search Results if you want to find a place near to the object you marked from the Search Results box Click From Mouse Select to manually set a point in the map from which you want to search In the Map Window point at the location and click to set the point 96 Click the Search Nearest Place button to start the search The search result will be sas displayed and appear flagged on the map shortly In addition the name of the location and distance from the point of origin will be displayed in the Search Panel da VEHICLE TRACKING WEB TOELT SEARCH WAP IE Cee p ET eode Shihe M dent bom Dirt Deden Areri wee Ff BVeeesevs Demn n fetter em Ave new earte led Click Hide All Found to remove all flags from the map window Using the Route Planner Click the Route Planner button to open the route calculator RoutePlanner CEEE Shores O Fastest ED
39. Route Planner 97 26 Locating and Tracking from the Tracking Website 99 Locating and Tracking a Device 99 Viewing the Tracking History of Your Device 101 Status Window Information 102 27 Using the POI Creator from the Tracking Website 104 Sending SMS Text Messages 105 28 Using the Diagnostic Program and do Online Device Upgrades 106 29 Using the Mobile Website 108 Login to the Mobile Website 108 30 Map and Search Features of the Mobile Website 109 Map Display 109 Searching for a Place or Map Object 110 Using the Route Planner 111 Using the POI Creator 112 31 Locating and Tracking from the Mobile Website 113 Locating and Tracking a Device 113 32 Device Setup and Alarm Configurations from the Mobile Website 114 Activate or Disable Vehicle Security AVL Models 114 Setup Power Saving Mode 115 Setup Geo Fence Areas 116 Device Settings 117 Change Login Password 118 1 Introduction The TSSR 3 1 Control Base software for use with GPS location and tracking devices consists of an advanced multifunctional geographic information system with extensive GSM and GPRS communication interface for short message commands and data exchange and integration tools for third parties server architecture It allows you to manage and remote operate all types of GPS tracking devices operating under the SuperGuard logo as operator from the Control Base or user over the Internet and mobile browsers It is designed for professional use in Service and Call Center
40. Security Devices AVL SMS GPS Vehicle Security Devices with SMS communication only Click Login to access the Tracking Website Add New User Account If you want to add a new User account to the database at the Control Base or service center click New User NOTE Please remind that you will have to proof ownership of SIM card and GSM number to setup a new device and User account online To do this insert the SIM card you want to use with the GPS device into an operational GSM phone During the setup of the user account you will receive login details and password per SMS on this number 84 Register New User Account Accourt Name Device SIM Number Gat Passpoa Go to Lagin To register the new account with the Control Base or service center fill in an Account Name you wish to use with your Web Services and the GSM number of the SIM card for the device Click Get Passport to receive an SMS text message from the Control Base or service center including confirmation of Account name and a password to login to Tracking Websites It is recommended that you setup your individual login password from the User Data settings of the Tracking Website You are able to change login passwords at any time later After receiving your login password return to the Login Page and enter Account name and Password into the relevant fields Retrieve Login Password If you already have a user account and device database but lost your login p
41. Website Device Setup Panel Overview The Device Setup panel allows you to draw and load up to four Geo Fence areas into your GPS device define Speed Limit alerts configure power saving modes and data storage and activate or disable vehicle security features for AVL units Add GeoFence Choose between three different modes of Geo Fence DEVICE SETUP alerts and use your mouse to drag and draw rectangular areas in the map Click Add GeoFence In to define areas that will Adi Geoterse trigger an alarm message when a device enters a oe a restricted territory Click Add GeoFence Out W to define areas that will trigger an alarm message when a device exits a territory Lv x bode acm E Show Current Poston Click Add GeoFence In Out to define areas that will trigger an alarm message every time a device crosses the border Speed Lane All Geo Fence areas you drew will be listed in the 9 hmh Geo Fence window Click Accept and Send A to load Other Options all Geo Fence information to the device To delete Geo Fences from the list select the Geo Fences from sae the list and click Delete Selected Geo Fence G You inten re will have to click Accept and Send again if you have Gu GPS every min already loaded Geo Fences to the device before O GPS shape on To view specific Geo Fences areas you have drawn in the map window select the Geo Fence from the list and click View Selected To show all Geo Fence areas you ha
42. Websites To enable access to GIS features from the Control Base or ArcIMS map servers you will need to configure one IP address and port Before you can use this port please make sure that it is not fire walled and uses a fixed IP connection eit From the application toolbar click GIS Settings or open the GIS Settings Manager from the Menu The GIS Settings Manager will appear IPPS Deude SE Meters at Seting Matoa Map Sean Litteewg Pont By default the IP Address list will list the IP connection available at your PC Server Select or enter the Listening Port number you want to assign to connect to Internet mapping GIS services Click Start if the GIS port has not been automatically opened when the Tracking System Server software was started To define a Default Map to be loaded when users login to the Tracking Websites choose from the list of maps if applicable The IMS Map Settings window lets you view the list and location of all connected map servers that use ArcSDE ArcIMS services if applicable Click Refresh to receive updated map database location information from the connected ArcIMS server To open the Internet Map Server automatically when the Tracking System Server software is started check Auto open GIS Service when start To maintain your broadband capacity and disconnect visitors that have logged in to Tracking Websites for long periods of inactivity or requests from your server you can setup a L
43. Yimin Track Interval Press Security Off to disable the vehicle security system this command will not automatically unlock vehicle doors O Yi min 30 Y sec Start Tracking Stop Track Start real time tracking Stop real time tracking Security On Security OF Saving Mode Coo 114 Setup Power Saving Mode From the Main Page press Saving Mode to define and setup power saving modes for your device GPS Settings Always on Always shutdown O Saving Mode 60 2550S sec Initialize Saving Settings Main Menu GPS Settings Always On The GPS module of the device will stay powered on all the time scanning for GPS satellites and save positions continuously Always Shut Down This will keep the GPS module powered off It will only wake up if an alarm has been triggered or it receives Location or Tracking commands The time to get positions will take longer due to cold start of the GPS module If no GPS is available at the location of the device you will not be able to receive an actual position Saving Mode 60 2550 sec Enter a time interval between 60 2550 seconds 42 5 min in which you like the GPS module to power on and get GPS fix The module will stay on for approximately 1 minute to get positions and return to sleep mode Press Initialize Saving Settings to send the setup parameters to the device 115 Setup Geo Fence Areas For every GPS device you can create and load up to 4 Geo Fence areas
44. abase Add Map lets you load new maps into your map database Note This feature will be disabled when ArcSDE ArcIMS server connections are used Archive Settings opens the device and user database for searching adding changing or removing user entries GIS Settings lets you define Web server port default map and ping ArcIMS server connections SMS Settings lets you setup and choose SMS modes and SMS over IP settings Modem Settings lets you configure your COM ports and GSM SIM card information GPRS Settings lets you define port for GPRS socket and default communication ports for TCP IP data exchange Database Settings lets you choose between standard MS Access database or SQL database management Inner Web Settings lets you start the embedded Web Server for standard Internet Intranet use Other Settings lets you change Fonts and font size for map display SMS text language Control Panel options and third party server connection Control Panel Overview The Control Panel enables you to send tracking commands configure GPS Tracking devices activate security features and run the test diagnostic program The TSSR 3 1 uses different SMS Control Panels for Personal Tracker PSP and Vehicle Tracking AVL devices To select the correct mode use Other Settings from the menu select the type of devices and confirm with Change to change the mask of the Control Panel according to device type ID lets you select and control all GPS
45. abase name into the fields and click Test to check if the connection to the SQL database is successful Click Accept to switch from Access database to SQL database use 51 10 Adding Users to the User Database Before you are able to run the Tracking System Server you will need to setup at least one user entry in your user database For every GPS Tracking device you want to add to your system you need to create a new user entry The Tracking System Server maintains a Dynamic Database feature that allows users to create user entries and manage their own personal information and device settings autonomously over the incorporated Internet Websites Operators are not required to enter or modify any personal user information From the application toolbar click Archive Settings or open the Archive Settings Manager from the Menu to open your user database The Archive Manager will appear Uwe nages Avthine SMG Semmes GPRS Darebare aB Moder l Web Sewer Onton ELA saaret TT iy age Dr ze D asust Latiano Licerne Pigne A Prose How to Create User Entries g To add a new user and device to your database click the Add User button This will open the User Archive manager Enter the following data and information into the User Archive manager 52 Spare Account contact he Corana NO ortad3 NO ENG Bowes WO Contal Center NO Max Speed Chal Maes oor PAD Erepeehers ChaiseMamber Adtre
46. acking devices select the port used for the 56K modem and check 56Kps Modem to configure the connection Enter the Data call number of your connection and click the Initialize Modem button to dial in to the network The Modem Monitoring Window will show if the dial in process was successful To add a DTMF decoder to receive data via DTMF tone from GPS DTMF tracking devices select the port used for the DTMF decoder and check DTMF to configure the connection Enter the DTMF number of your connection and click the Initialize Modem button to register Check Direct Connect if you want to connect to a GPS tracking device directly through RS232 connection Click the Initialize button to configure the relevant COM port Use commands of the Control Panel to initialize or upload data from the GPS device directly Finish the configuration for each COM port by clicking the Initialize icon In the Communicator Window you can view the system s activity and whether your initialization was successful 44 is To finalize settings for SMS messaging click the SMS Settings button from the toolbar or open the SMS Settings Manager from the Menu If you use external GSM modem hardware connected to the Control Base server select Modem and adjust settings accordingly Choose PDU Mode if your modem is able to send SMS messages by PDU Protocol Description Unit mode default for Siemens and Telit modems Choose Text Mode if your modem sends
47. acking Website Basic Functions Website Overview The Tracking Website for Internet Explorer allows users with access to Internet to view and print maps search for locations or near objects find shortest path and route information create individual Points of Interest monitor and track their GPS devices manage device settings send remote commands and modify their personal user information Function Buttons Map Tools Function Panels VERJCCE TRACKING WEB pasar neg TRINITY CHURGH mga RICAL e 5 c PAAK Ga SEARCH MAP 3E a7 Mpas NO Vs TIONAL GALLERY OF sare li POOL e5 OTA WAL GARD BUTH CAPTO ELN Dean is Jetierson Ae near mer secton Xi Status Window Map Window 18 Website Map Tools Overview Web users can select and view maps available from the Control Base map database Various map tools will allow them to operate zoom and pan functions The Zoom Out tools let you zoom out from a map extent The Full Map tool lets you view the entire map currently loaded Washington The Map Selection tool lets you choose and load maps The Pan tool lets you grab and move the map The Zoom In tools let you to select and zoom into a map extent In addition users can choose from eight zoom levels to view map extents comfortably To print the current map on a printer or
48. assword you can retrieve password information by clicking Get Password in the Login page Retrieve Password you canot remember your Logn passed you can retneve the pasted either by e mail o SMS taxt message To recewe your paseword si the emai address you hye setup earher in User lata settings check E Mail you choose te raceiwe your password by SMS you wil be raquired to proof wanership of the SIM card used in the Gi xe Todo that please nsen the EIM card wth the device into a GSM cell phone Capable of recewing SMS ext messages Enter Accourt name of Oowce SIM card number in the falds below and proceed th OK to receive Accourt and Password details hom the Sevice Center Please send my Paseword through Email SMS text message I only remenber ny Account Name Denice SIM aumber oK Cng 85 If you have registered an e mail account to receive lost password information check Email If you like to receive your password per SMS insert the SIM card used for the GPS device into and operational GSM phone and check SMS text message In the next fields enter either Account Name or Device SIM number required to retrieve your password and click OK to receive account and password information Return to the Login page choose your GPS device type and click Login to proceed to the Tracking Website main page Daan ao beer net Comore stad PERDONAL TRACHIWG OER You will now be able to use the full range of online
49. at are using Data Call or DTMF for data exchange the Tracking System Server software provides interfaces to 56K modem and DTMF decoder When connecting to 56K modems make sure that your existing phone line accepts Data calls to and from cellular networks and has caller ID function To connect and dial to 56K modems or DTMF decoders you will need to manually choose ports and setup the devices from the Modem Settings manager 41 Temhing Sytem Operame Wieden Modem Configuration Before you can make use of the GSM features of your Tracking System Server application make sure that all software has been installed properly and the GSM terminal with SIM card is powered on and connected to the serial port of your PC server Start the application by double clicking the program icon from your Windows Desktop or choose Tracking System Server from the Start Menu Program Files The system will automatically detect and initialize The number of ports and their configuration Connected GSM devices Availability of SIM card Availability of GSM network To setup your SIM card information and GSM number click the Modem Settings button from the toolbar or open the Modem Settings Manager from the Menu be able to send commands and connect to tracking devices sl Gory Achhe GMS Setina GPF Dwtatase an Moden web Serer Oston If no GSM device has been detected all ports will be closed anne nen meae meene e
50. bile Website If you own a GPRS enabled cell phone PDA or Pocket PC with color display and your subscription allows free GPRS access to browse mobile Websites you will be able to make full use of the TrackMobile sites which provide access to online maps and nearly all features from the Tracking Website for Internet browsers The TrackMobile sites for Personal Tracking devices and vehicle units are designed to operate and made fit to the screen on more than 150 types of cell phones currently in the market Login to the Mobile Website Start the mobile browser if your cell phone and enter the HTTP service address for TRACKMOBILE in the Address bar to access the Login Page Tracking System User Account Password Personal Tracker AVL GPRS O AVL GSM Online 1 In the User Account and Password fields enter the user name and login password you have received from your service center or through online registration Select and check the device type of your GPS Device PSP Personal Tracking Devices AVL GPRS GPS GPRS Vehicle Security Devices AVL SMS GPS Vehicle Security Devices with SMS communication only Select or press Login to access the Mobile Website This will link you to the Main Page with location details for the last known GPS position tracking features and links to all other pages of the Mobile Website To view the last position on a map extent or access map search and other map
51. ce will automatically dial to the phone number set as Contact 1 The Address field shall contain the service address if required by your service center To be able to retrieve your login password by e mail in case it has been lost you can enter your e mail address in the Email field In the GPRSuID field enter the GPRS user name or ID for GPRS connectivity if required to enable GPRS services with the SIM card used in your GPS device In the GPRS Pwd field enter the password for GPRS connectivity if required to enable GPRS services with the SIM card used in your GPS device In the GPRS Dial field enter the GPRS dial number required to use GPRS services with the SIM card used in the GPS device Please ask your GPRS service operator to provide this information In the APN field enter the Access Point Nod address required to use GPRS services with the SIM card used in the GPS device Please ask your GPRS service operator to provide this information 88 To update your user account at the service center and send all user information and configurations to the GPS device click the Submit button Submit User Info 8 Your GPS device will now be able to recognize and accept SMS commands send from the Tracking Websites locate and track your devices on the digital map receive current and past GPS information remote control various car security functions AVL and receive alarm messages and vehicle locations in case of emergency acciden
52. ceived From _ Active Door Lock Engine Off sos Ot 0001 1 1 2003 14 12 37 True 9495554667 True False True False Confirm that you accepted the alarm by clicking the check box in the Device ID field At the same time your Control Base will send an SMS text message to all Contact numbers from the User account LJ Wcereation Crash Sensors Have Been Triggered GPS Cer Mew Accent If a vehicle has been rammed or is involved in a car accident the device will send a Crash alert to the Control Base On the operator side you will receive an event entry in the device status log Event Window and History log Ta Eagebion 5 Everts 0 565 76 771 17 Activate Disable Vehicle Security AVL Models Operators at the Control Base are able to remote activate and disable the GPS Vehicle Security of an AVL device From the Control Panel select a vehicle from the Device ID menu Commands Security AR a In the Security Commands click the Activate button to activate Vehicle Security on the device Click the Disarm command to disable Vehicle Security on the device NOTE Disabling 2 the For every command you will see the location and relevant information of the tracking object on the map window Click Query Last Status to get location and information about the current status 18 Using the SMS Editor Operators can write and send SMS text messages on behalf of user accounts from the Tracking System Server
53. d or distributed to others You may not create modify alter adapt merge decompile or reverse engineer the Software and you may not remove or obscure SuperGuard logos or other included copyright or trademark notices COPYRIGHTS The Software accompanying this manual is protected by copyright laws of the United States and Hong Kong SAR The Software documentation is copyrighted You may only copy the Software and the Software documentation for backup or to load the Software onto your computer as part of program execution TITLE TO SOFTWARE AND CONFIDENTIALITY The Software and all copies thereof are proprietary to SNT and title thereto remains in SNT All applicable rights to patents copyrights trademarks and trade secrets in the Software are and shall remain in SNT You may not sell transfer publish or otherwise make available any software or copies thereof to others You acknowledge that the Software is a trade secret of SNT You agree to secure and protect each program software product and copies thereof in a manner consistent with the maintenance of SNT s rights therein and to take appropriate action by instruction or agreement within your organization to satisfy your obligations hereunder Violation of these provisions shall be a basis for immediate termination of this license Termination of the license shall be in addition to and not in lieu of any other legal or equitable remedies available to SNT SOFTWARE LIMITED WARRANTY ALL SO
54. de and exceed all terms of this Limited Warranty You acknowledge that you have read this Agreement and understand it and agree to be bound by its terms and further agree that it is the complete and exclusive statement of the Agreement which supersedes and merges all prior proposals understandings and other agreements oral and written between the parties to this Agreement This Agreement may not be modified or altered except by a written instrument duly executed by both parties This agreement and performance hereunder shall be governed by and construed in accordance with the laws of the Special Administrative Region of Hong Kong If any of the provisions or portions thereof of this Agreement are invalid under any applicable statute or rule of law such invalidity shall not affect the validity of the balance of this Agreement and such provisions or portions thereof are to the extent of their invalidity to be deemed omitted from this Agreement TABLE OF CONTENTS 1 Introduction 7 2 Control Base Basic Functions 8 Application Overview 8 Main Menus Overview 9 Main Toolbar Overview 10 Control Panel Overview 11 History Panel Overview 13 Search Panel Overview 14 GPRS Panel Overview 15 Device Status Log Overview 16 Eagle Map Events Window SMS Window Overview 17 3 Tracking Website Basic Functions 18 Website Overview 18 Website Map Tools Overview 19 Website Function Buttons Overview 19
55. define Geo fence areas Map Tools Hide GeoFence hides all Geo Fences displayed in map Map Tools Remove GeoFence lets you remove Geo Fences settings for selected devices Map Tools Add New Map lets you add a new map to the local map database View Unit Status View Control Panel View Scale Panel View Compass lets you open or close the Device Status Log lets you open or close the Control Panel lets you open or close a metric scale in the current map extent lets you open or close a North indicator Manager Archive Settings opens the device and user database for searching adding changing or removing user entries lets you define Web server port default map and ping ArcIMS server connections Manager SMS Settings lets you setup and choose SMS modes and SMS over IP settings Manager Modem Settings lets you configure your COM ports and GSM SIM card information Manager GPRS Settings lets you define port for GPRS socket and default communication ports for TCP IP data exchange Manager Database Settings lets you choose between standard MS Access database or SQL database management Manager Inner Web Settings lets you start the embedded Web Server for Internet Intranet use Manager Other Settings lets you change Fonts and font size for map display SMS text language Control Panel options and third party server connection Manager GIS Settings Help Online Upgrade Help
56. device in the map window Click Hide All to make track lines and Geo Fences disappear from the map window Website Search Panel Overview The Website Search Panel allows users to search a map for places street names and landmarks find locations and distance to other objects and calculate the shortest route and distance between two points Type Key lets you specify the layer or type of object to be searched lets you enter the name or parts of the name of the search object Click the Search button WB io start the search The Search Results window will display the names of all places beginning with the name entered in the Search key Choose from the list and double click to view the location on the map To scroll through the complete list of search results use the First Prev Next and Last buttons Search Near Places allows you to search for specific objects near to a Route Planner search result Select the type of object you search for and click From Search Result to start searching from a location from the Search Results window Click From Mouse Select to start searching from a point you click in the map Click Search Nearest Place W to start the search The name of the result and distance to the point of origin will be displayed shortly will open the Route calculator enabling you to calculate and show the shortest distance and route between two points in the map To set the current GPS positi
57. device you want to initialize al gt The GSM phone number of the f Search History Control lt gt Device will appear in the Phone field PT2 Controller under the device ID ID 00000001 a ig Click the Initialize button next j to the device ID field to send and initialize user information and configurations you have entered in the User Archive to the GPS device Phone 18175554321 The GPS device will then be able to recognize and accept SMS commands you send from the Control Base or Websites Every time you make changes on SIM card details GPRS dial in information and Contact numbers or change communication ports for GPS devices at the Control Base you will need to reinitialize the device with the new configurations o After setting up the Web Services users can modify or update information to the Dynamic User Database and their GPS Devices independent from Control Base operators After initializing all GPS devices operators and users are able to locate and track them on the digital map receive current and past GPS information remote control various car security functions AVL receive alarm messages and vehicle locations in case of emergency accidents AVL car theft or tow away AVL for every device from your database 56 Setup Geo Fence Areas for a Device For every device up to 4 Geo Fence areas can be created Using the Geo Fence tools from the toolbar you are able to draw Geo Fence bou
58. devices from Search History 8 Control 41 gt your user database Click the Initialize unit FT Controller button to send user information and settings 00000001 Bae AA to the selected GPS unit Click Upgrade Device Phone 18175554321 to transfer new firmware upgrades to the k Get Location Test PSP device over GPRS Track To initialize Geo Fence areas you have drawn Track Timer before click Initialize Geo Fence Sl o dy Jo hour fi min Track Interval ah Phone shows the phone number from the SIM card Z used in the device All SMS commands will be 0 0 o send to this number Saving GPS Always On Get Location PSP Panel sends a command to the device C GPS Always shutdown to receive current GPS position and status C Wake uptime ea sec information to be displayed on the map To get one single location from a Vehicle unit in the AVL Panel click Query Last Status button p instead eve Initialize Saving Mode Test Device PSP Panel starts the testing and diagnostic program to monitor GPS satellite availability GSM signal strength and other test features Track Timer lets you setup a tracking period over which you like to receive positions from a device You can choose a time ranging from 1 minute to 45 days using the M minutes H hours D days menus Track Interval lets you setup the interval in which you
59. ding Shows when a maximum speed violation occurs Battery Low Shows if the spare battery of the device is low Accident AVL models Shows if the vehicle crash sensors have been activated Door Open AVL models Shows if the vehicle doors have been opened with security on Car Moved AVL models Shows if the vehicle is been moved with security on Power Removed AVL models Shows if the vehicle battery has been removed or power is low Latitude Shows latitude information Longitude Shows longitude information Speed Shows actual speed Online Now Shows if the device is GPRS online at this moment Select Refresh to refresh information from the Control Base Mobile Website Password Page Password Confirm Main Menu 32 To change the login password to access your Tracking Website and mobile Web enter new password in the Password field and reenter again to confirm new password Select Submit to submit the password change Select Main Menu to return to the Main Page 5 Glossary Command Digital instruction send by an operator or user to perform a specific function or operation Map Object A point line or shape on a digital map layer containing a name and geographic information e g countries rivers districts streets buildings parks Device Status A set of GPS and status Map Tools A system of tools that allow you information data received to view map extents zoom
60. e Car Moved Shows if the vehicle is been AVL models security is active or disabled AVL models moved with security on Speeding Shows when a maximum Door Open Shows if the vehicle doors speed violation occurs AVL models have been opened with security on GeoFence Shows when a GeoFence Power Cut Shows if the vehicle battery alarm has been triggered AVL models has been removed or power is low 26 4 Mobile Website Basic Functions Mobile Website Main page The Mobile Website for mobile browsers allows users with GPRS enabled mobile phones PDAs or Smart Phones with color display and support for WML and HTML to access maps search for locations or near objects find shortest path and route information create individual Points of Interest monitor and track their GPS devices manage device settings send remote commands and modify their personal user information Tracking Dean is nearby Longtude 000000000 Latitude 000000000 See Map Get GPS Position Track Tumer D v day vV ihour 0o viaa Track Interval 0 hour I Vimin system 3D sec Start Trac Stop Track Start real time tracking Stop real time tracking Saving Mode Search POI Geo Fence Device Setup Device Status Password The Main Page includes the following features The main page header includes street name and location details for the last recorded position of the GPS device Select or press See Map to view th
61. e ae HarQuwe You will be able to use all GIS related features of your Tracking System Server software but not pgp ceed Darel rh Gove To connect and initialize a GSM terminal later you can use the Modem Manager from the ee application menu or toolbar Weare mader rene plans wat 42 43 The Modem Settings Manager allows you to connect to ports and initialize or disconnect external modems connected to your PC server To add a GSM modem manually select the relevant COM Port and check Open to open the port and establish a connection to the device Check GSM Modem from the Hardware list In the SIM field enter GSM phone number of SIM card used in the modem In the SC field enter the SMS Service Center number of the SIM card used in the modem Enter PIN code into the PIN field if necessary to unlock SIM features Adjust the baud rate according to modem specifications if necessary Click the Initialize button to start and register the modem The program will try to establish connection to the port and initialize the modem for 10 times If connection cannot be established the port will close automatically If successful the Modem Monitoring Window will start displaying AT commands and confirm if there is a connection established Check Close to discontinue a connection between PC and GSM modem The Modem Monitoring Window will stop displaying AT commands To add a 56K modem to receive data via Data Call from GPS Data Call tr
62. e call to the Control Base allowing you to listen to all events and activities happening in the vehicle 74 Geo Fence Alert Geo Fence area has been violated eee a If a device is entering leaving or crossing a predefined area that has been setup as Geo Fence the device will send a Geo Fence alert to the Control Base On the operator side you will receive an n event entry in the device status log Event Window and History Ga EodeMeo i caen iad sug log Vehicle ID GPS Sent GPS Available Received From Active Door Lock Engine Off sos O38 0001 31 2003 16 29 12 Tre 9495554667 False Tre False False Confirm that you accepted the alarm by clicking the check box in the Device ID field At the same time your Control Base will send an SMS text message to all Contact numbers from the User account Speeding Alert Maximum Speed Limit exceeded SOCET If a device is exceeding the maximum speed limit configured earlier the device will send a Speeding alert to the Control Base On the operator side you will receive an event entry in the device ie gt status log Event Window and History log Ge Eegeeo E craen E S05 Vehicle ID GPS Sent GPS Available Received From Active Door Lack Engine Ort sos O38 0001 3 1 2003 16 29 12 Tme 9495554667 False Tre False False Confirm that you accepted the alarm by clicking the check box in the Device ID field At the same time your Contro
63. e current position on a map extent along with zoom and other mapping features Press Get GPS Position to send an SMS command to the GPS device in order to receive the latest available GPS position Use the Track Timer and Track Interval menus to setup a tracking schedule From the Track Timer you can choose a time ranging from 1 minute to 45 days using the M minutes H hours D days menus The Track Interval lets you choose the interval in which you like to receive positions from the device Select Begin Tracking to send a command to the device to start the scheduled tracking Select Stop Tracking to abort the tracking before the end of schedule Select Start Real Time Tracking to start receiving GPS positions in real time GPRS connection on the GPS device required To view the results on the map you will need to open the Map page and manually refresh the page To stop real time tracking mode select Stop Real Time Tracking Security On AVL models lets you activate vehicle security features of your GPS device Security Off will disable vehicle security Saving Mode will open the Power Saving page with options to save battery power on your device Search will open the Search page with options to search for locations and route planner 27 POI will open the POI page with options create label and edit points of interest Geo Fence will open the Geo Fence page with options to create setup or delete Geo Fence areas Device S
64. e unit shall store GPS positions and status data to its memory To activate data storing click Start Store To stop the unit from storing data click Stop Store l To upload all data from its memory to the history database and clear the unit s memory click Upload Data from Unit GPRS required Message lets you write and send SMS text messages to a number you have entered in the Phone field The GSM monitoring box at the bottom of the Control Panel displays activities and short status information of connected GSM modems or terminals indicating SMS sent and received 12 Message sms Reading SiM card now History Panel Overview The History Panel enables you to review search save and retrieve positions end events received from GPS devices and stored in the history database From the Tracking History Time menu choose a time period to view the tracking history From the Device menu choose a Device ID or view history of All Devices from your database From the Status field select if you want to view the complete history database or only the history connected to an event From the Event Completed menu filter the events that have not been completed or accepted yet The History log allows you to view all positions status and events according to the parameters you have selected in the fields above Click on a table row if you want to view this position and date on the map Click at the table head
65. easure length Click once to set the starting ih point and draw a line to the next point Click once again if you want to continue from the following point Double click if you want to mark the point as end point The measure results in meters can be viewed in the status bar below the Eagle Map window To print the current map extent click Print in the toolbar or go to File Menu Print amp Follow the instructions from the printer dialogue box to print the map extent To save the map extent currently displayed to a Bitmap bmp file click Export Map in the toolbar or go to File menu Export Map Select the destination folder and click Save to save the current map extent 61 13 Using the Search Functions The Tracking System Server software allows operators to make use of various convenient and fast search operations from the map database You will be able to search for places and objects find other objects next to a specified location and calculate and display shortest routes Searching for a Place or Map Object From the Control Panels select the Search Panel to access search function tools M Search S History a8 Control 4 Search Search Place Search Layer 41 Layer Search Key Roosevelt fh N ROOSEVELT ST N ROOSEVELT ST N ROOSEVELT ST ROOSEVELT ISLAND FRANKLIN D ROOSEVELT MEM PA v From the Search Layer menu choose from the list of available search criteria by selecting the
66. eceive the last known position and time stored in the device memory The time to view position updates on the map will depend mainly on SMS messaging speed and can take up to 20 60 seconds To setup a tracking schedule to report back in timed intervals you can setup Track Timer and Track Interval by selecting designated time parameters The Track Timer allows you to select time periods between 1 minute and 45 days 44d 23h 59m Setup an interval in which you want the device to report back over the time period set above The Track Interval allows you to select time intervals between every 30 seconds to every 18 hours 17h 59min 59sec 99 Click the Start Tracking button to start tracking the device according to the tracking parameters you set up above The device will confirm the setup by sending one first SMS with GPS position and status and continue sending in the interval you set To stop the device from sending positions before the initial tracking period is up click the x Stop Tracking button To monitor the track of a device in Real Time Tracking mode click Start Real Time E Tracking This will send a command to the device to go GPRS online and keep sending data every time a new GPS position is available ca 10 seconds During this time the dot in the map marking the position of your device will start flashing red and you will see it moving step by step followed by a red trail line da VEHICLE TRACKING WEB
67. er and mobile browsers for GPRS enabled cell phones and PDAs with color display The Personal Tracking Web and Vehicle Tracking Web allow you to create and manage your user account autonomously setup initialize and control device configurations locate and track your devices on a map search for places streets or other objects from the map make route calculations and setup and label own points of interest in the map a VEHICLE TRACKING WEB T Yoo Jape SEARCH MAP PURE Kesh GPS SOCREITY Soenting GLO Pence SOG Aceit Battery CorWeved OoarOees Powertet sro J EEU TUUU VI Dean is h Jefferson Ave new mer section Xi 83 22 Adding Users Login to the Tracking Website Login to Tracking Website with Internet Explorer To view the Tracking Website online on a PC with Internet connection you are required to install Microsoft Internet Explorer IE 5 5 or higher Make sure your browser supports frames and Java Applets before you are able to use all Website functions of your Tracking System Start Microsoft Internet Explorer and enter the HTTP service address for TRACKWEB in the Address bar Click Go to access the Login Page F Tracking Syren Lagin Microseth lriernet Eephonet Favona tp If your service already has provided you with User Account and Password enter these into the Account and Password fields Select the device type of your GPS Device Personal Tracker Personal Tracking Devices AVL GPRS GPS GPRS Vehicle
68. ers to reorganize the order of history entries To scroll through all pages of the history database use First Previous Next and Last page 9 aprs 4 History ae sms mM 41 gt Tracking Hi oe Ws Hide Tracking History in Map Backup Database mport Database Click Show Tracking History In Map to select a time period and view the history track as colored line in the map window Click Hide Tracking History in Map to make the track line disappear from the map Click Backup Database to define a time interval in which data entries from the history log shall be saved to your database Click Import Database to load previous history files from your database Search Panel Overview The Search Panel enables you to search a map for places street names and landmarks find near locations and calculate the shortest route and distance between two points Search Layer lets you specify the type of map objects Search Key you are searching for lets you enter the name or parts of the name of the location or object you are searching for Click the Start Search button to start the search The Search Results window will display the names of all objects found according to your search parameters Choose from the list and double click to view the item on the map Search Nearest allows you to locate a place or object next to Navigate a given point or name Click Nearest from Search Result l
69. essages whenever your GPS device in or out of the defined area Add GeoFence Show All To let the device report with an alarm when it enters a restricted area click Add Geo Oo Fence In To let the device report with an alarm when it exits from a predefined area click Add ia Geo Fence Out To let the device report with an alarm when it crosses the border of a predefined area Cal click Add geo Fence In Out 90 Point at the map window Click and hold the mouse button down and drag the cursor in the direction you want to draw the Geo Fence area Release the mouse button to view the rectangular area you want to setup as Geo Fence for the tracking object Repeat these steps if you want to define a new Geo Fence GREEN U Eny D Ons munna a MADA SsereeesORe BATION WOE PER DENCE WALLENATRD Add GeoFenoe Geo Fence 1 Geo Fence 2 Every time you create a new Geo Fence area a new Geo Fence number will be listed To view a Geo Fence area mark the LX on number in the list and click View Selected to display it in the map To view all Geo Fences click Show All To Hide all Geo view Selected Fences displayed in the map click Hide All To view the last known GPS position of your device in the map click Show Current Position Before you initialize your device with Geo Fences you still will be able to delete Geo x Fences you have drawn by marking them in the list and c
70. etup will open the Device Setup page with access to user database and necessary features to setup your GPS device Device Status shows you time and all status information received with the last data package Password lets you setup or change your personal login password to access Web Tracking over Internet Explorer or mobile browsers Mobile Website Map Page x The Map page opens a graphic display of the map reformatted for i Pennsylvania gt display on small screen devices allowing you to view and refresh v GPS positions search for locations and receive route information on your mobile device The Map Page includes the following features Carolina on Refresh lets you receive updated GPS positions during Real Time tracking or after new data has been received at the Control Base Show GPS Position lets view the last known GPS position of the device centered in the map after searching for locations or other mapping activities Refresh Show GPS Poston To zoom in or out of a map extent you can either choose one of 8 Level 2 zoom levels directly or zoom step by step Select a Level and press Zoom to level to use preset levels Select Zoom In or Zoom Out to om to leve zoom step by step To move the map extent in four directions select Up Down Right and Left To adjust the viewing size of the map to a larger screen size select Level 2 and press View Size To revert to original size select Level 1 and press
71. facilities with existing Broadband Internet connection and static IP address GSM terminal Web Server and database systems Utilizing ArcIMS server connection service capacity per CPU can range from 1 220 user logins at the same time Additional CPUs can be appended according to requirements The TSSR 3 1 Control Base software and incorporated Websites will enable you to Choose and view detailed vector maps in street level points of interest additional information at operator base or online over Internet and mobile browsers Zoom pan and print map extents Do multiple search for geographic areas roads points of interest and other map items Define and find specific map items near to a location Calculate and display the shortest or fastest route between two points Send SMS commands and text messages Locate monitor and control tracking objects in real time Manage tracking history and user database Setup up to five individual Geo fence for each tracking object Setup parameters and initialize new GPS devices wireless Remote operate vehicle security systems Run test program and device upgrades wireless over GPRS 2 Control Base Basic Functions Application Overview Menu Bar Toolbar Controls GPRS Socket Search Panel Map Window G pe Meor Yew Merge S vet has 203420080 Gxeeme Tee Oe 14 Qocceers 2004 04 27 0 Goera 2994 42 25
72. fers a selection of maps for different countries or cities you will be able to change between maps from the Map menu Select and press Change Map to switch between maps Show GPS Position Level 5 v Zoom to level Zoom In Zoom Out Up Down Right Left View Size Search Place Clear Found Path Length 0 Washington2 v Change Map Main Menu 109 NOTE If you send a location command to your GPS device or wish to view it s last known position you will have to change to a map that covers the area in which the device is located in order to view it s position Searching for a Place or Map Object To access the Search Page select and press Search Place From the Type menu choose from the list of available search criteria by selecting the type of information you want to search for Select All if you want to search the complete GIS database In the Key field key in the name or parts of the name of the search object The more accurate and complete the name you entered is the faster and fewer are the search results displayed in the Search Results box Press Search Place to start the search The Search Results box will display all places or objects from the GIS database matching the search criteria and contain the name you have entered Select a result from the Search Results box and press Show Place to return to the Map Page The search object will appear flagged with a callout box To resume your search or cho
73. formation GPS module status GSM signal strength indicator and device function buttons Personal Tracker models alfi z Fie Mim Towle View Miammuny Hote Co PTY Contention Ge Locotes Chnpeartc Trech Troch Twe p aide P Jaf Jm E inap Jen fo Se elol el E OFS baer Oe GPO Fate Dare Ira GEM tome C ope we GPG Abeays smadoan JPE denne oe aie hotest 5 d r mr g wes soume Fo Free herbus a s bowa ra re 5 Mod Leegude r ore Sorg d Lato 2 wenn ee 2l eers mann Re Stott te L Dersen 141058 81 Click Begin Test to send an SMS command to the device in order to let it go GPRS online and switch to testing mode The diagnostic program will start showing all available satellites GPS and GSM signal strength To test the Hot Start time of the GPS module in the device click Restart GPS Pest ID 00000006 FSF States sioi x 00000006 Diagnostic GPS Satelite Status GPS Status Buttons Status GSM Status GPS Available True Bos 99 TIFF a 5 button HotStat 0 8 Longitude 11404 5606 Latitude 222325412 Begin Diagnostic Restart GPS Stop Diagnostic button button3 a To stop the diagnostic program and let the device go offline click Stop Test 82 21 Using the Tracking Website Upon receipt of your GPS tracking or vehicle security device you will be able to access Websites designed for use with Internet Explor
74. hing for a Place or Object 62 Searching for a Near Place or Map Object 63 Finding the Shortest Path and Routing 64 14 Using the Location and Tracking Commands 66 Locating and Tracking a Device 66 Configuring a Tracking Schedule 67 15 Using the History Log 69 Viewing and Storing the Tracking History of a Device 69 Maintaining the History Database 71 16 Accepting Events 73 Types of Events SOS Emergency Geo Fence Speeding Battery Low 74 Vehicle Security Alerts AVL Models 76 17 Activate Disable Vehicle Security 78 18 Using the SMS Editor 78 19 Online Software Updates and Upgrading Devices 79 Download and Installation of Software Updates 79 Sending Firmware Upgrades to Devices 79 20 Testing Devices with the Diagnostic Program 81 21 Using the Tracking Website 83 22 Adding Users Login to the Tracking Website 84 Login to Tracking Website with Internet Explorer 84 Add New User Account 84 Retrieve Login Password 85 23 Managing User Data and Initialize Devices from the Tracking Website 88 Initializing Your GPS Device 87 Changing Your Login Password 89 24 Device Setup and Alarm Configurations from the Tracking Website 90 Setup Geo Fence Areas 90 Setup a Speed Limit 92 Setup Power Saving Mode 92 Activate or Disable Vehicle Security AVL Models 93 Setup GPS Storage Sequence AVL Models 93 25 Map and Search Features of the Tracking Website 94 Searching for a Place or Map Object 95 Searching for a Near Place or Object 96 Using the
75. ice 58 Setup GPS Storage Sequence for a Device AVL Models For all Vehicle Tracking devices that are able to store GPS data into their memory for uploading at a later time you can setup storage intervals from your Control Base software Open the Control Panel SMS panel in Options has to be set to AVL From the Device ID field select the device ID of the vehicle unit for which you want to apply the storage sequence GPS Data Storage Store Data ever 30 gt sec olo Set the time interval in Store Data every sec between 60 2250 seconds Click the Start Store button to setup the storage sequence the vehicle unit e Click the Stop Store button if you wish to stop the vehicle unit from storing GPS information to its memory To let the vehicle unit upload its complete GPS data storage to the database at the Control Base click Upload Data from the Unit This command will let the vehicle unit go GPRS online All GPS data stored in the vehicle unit s memory will be transferred to the Tracking History of the Control Base software To view the track history of a vehicle use the features included in the History Panel from your Control Base software 59 12 Using the Map Tools The Tracking System Server provides operators a variety of useful map tools and functions To load maps from your local map database into the map window choose from available maps in the map menu This feature will not be available
76. ice Enter ArcIMS Server location Port number and Service name into the fields and click Accept to establish connection to the server 50 Configuring User Database Connection For your Tracking System Server you have the choice between using the included MS Access database program or connection to an external MS SQL Server to store and manage your user database From the application toolbar click Database Settings or open the Database Settings Manager from the Menu The Database Manager will appear Anhe BMS Settee GPRS C GB Modern Web Bewer Ostos DataDace Setrg F Use teceas f PAS tocept amen Sening Pareang eme Text To configure the system to use the included Access database select Use Access All user database files of your Tracking System Server program are password protected The default password is win2000 It is recommended to change database passwords frequently Please use MS Access to open database files as Open Exclusive then unset and change passwords accordingly Click Test to check if the connection to the database is successful If you want to use SQL Server as database program please contact our customer service or hotline to receive customized database files and instructions for use with your server architecture After setting up SQL client and customized database files select Use SQL Server in the Database Manager Enter the Server address User name database Password and Dat
77. if you use a map database in connection with ArcSDE ArcIMS services To view the entire map in the map window click the Full Map button from the tool bar or go to Map Tools Menu Full Extent e Click the Zoom In tool from the toolbar or go to Map Tools Menu Zoom In to zoom into a map extent In the map window hold the left mouse button down and drag to mark the Cg area you want to zoom in You will see a box being drawn When you let go of the mouse button the map will zoom in to the extent you selected 60 eens nang cog be To zoom out of a map extent click the Zoom Out tool from the toolbar or go to Map Tools ow Menu Zoom In Point at the map window and click to zoom out of a map extent Click repeatedly to zoom out to the next scales To grab and move a map extent click the Pan tool from the toolbar or go to Map Tools H Menu Pan Point and click at the map window Hold the left mouse button down and drag the cursor in the direction you want to move the map extent To select and move a map extent from a higher zoom scale you can use the Eagle Map screen From the Eagle Map window move the marked area to the position you want to place the current map extent from the main Map Use click and drag to move the map extent within the Map Screen Ta Ensletten J Everts Ge SMS To measure distances between two or more points in the map use the Measure tool from the toolbar or go to Map Tools Menu M
78. ife Time 47 between requests Users will have to re login to the Web services if the period of inactivity has exceeded the amount of time Configuring Simple Web Server Connection The Simple Web Server connection allows you to connect to an Internet Explorer Tracking Website over LAN or workgroup computers In addition it allows running simple web services from operating systems that are not able to install Internet Information Services IIS or for small and medium size businesses that want to run the Tracking System Server software as stand alone version for single company purposes only From the application toolbar click Simple Web Server Settings or open the Simple Web 2 Server Settings Manager from the Menu The Web Server Manager will appear By default the IP Address list will list the IP connection available at your PC Server Select or enter the Listening Port number you want to assign to connect to the Simple Web Service Click Start if the port has not been automatically opened when the Tracking System Server software was started Click Stop if you want to disconnect from the port Since Website logins are limited to 1 20 logins at a time maintain your login capacity by disconnecting visitors that have logged in to the Tracking Website for long periods of inactivity or requests from your server you can setup a Release Time between requests Visitors will have to re login to the Website if the period of inactivity has
79. ion and GPS date and time for every alarm in order of appearance Information GPS car alarm Velecle Mo GPS car sarm Door Oper GPS car alarm Acodent GPS car alarm SOS GPS car alarm SOSLGEC NOTE The Event window will be automatically cleared when you exit the software All event entries can be viewed later using the History log 73 Types of Events He Tyrer Poeer nie Wisse Be mept See taye te TL CEEE E E e eww B unesmeas i Tuning kwee OA LITIOA EM OSBE OTT ammen n SOS Emergency Alert SOS Button has been pushed rterestan If somebody pushes the SOS emergency button of a GPS device the device will send an SOS alarm message to the Control Base On the operator side you will receive an event entry in the device a status log Event Window and History log Ta ige j cent E s Vehicle ID GPS Sent GPS Available Received From _ Active Door Lock Engine Off sos Ot 0001 1 10 2003 10 15 46 Tre 9495554667 False Tre False Tre Confirm that you accepted the alarm by clicking the check box in the Device ID field Vehicle ID GPS Sent GPS Available Received From __ Active Door Lock Engine Off sos M 0001 1 10 2003 10 15 46 Tme 9495554667 False True False Tre At the same time your Control Base will send an SMS text message to all Contact numbers from the User account NOTE If configured the device will then place a silent phon
80. l Base will send an SMS text message to all Contact numbers from the User account Battery Low Alert Low Battery Power Ls raman 00 GPS Car Asm Gateery Lew 7 If the spare battery of a device is low the device will send a Low Battery alert message to the Control Base On the operator side you will receive an event entry in the device status log Event Window and History log e Ta EageMap il Sweet E SMS 75 Vehicle ID GPS Sent GPS Available Received From Active Door Lock Engine Off sos Vehicle ID GPS Sent GPS Available Received From Active Door Lock Engine Off sos Ost 0001 1 10 2003 13 36 01 Tme 9495554667 False False False False O24 0001 1 10 2003 10 11 23 Tre 9495554667 False False False False Confirm that you accepted the alarm by clicking the check box in the Device ID field Vehicle Security Alerts fo r AVL models on ly At the same time your Control Base will send an SMS text message to all Contact numbers from the User account 10 Weerreaton Door Is Opened with Security On 20 GPS Car New Dew Open ams D jeha rraaos P Main Power Has Been Cut O eee ee If the doors of a vehicle are opened with GPS vehicle security on if SPO Ses ee ees Cre Oo the device will send a Door Open alert to the Control Base On the A fi P 4 A If the vehicle battery has been cut off or removed or reaches a operator side yo
81. licking Delete Selected Geo Fence To initialize and load your GPS device with the Geo Fence areas you have created click Accept and Send If you wish to remove or add new Geo Fences at a later time you can do this by deleting and adding Geo Fences as described above You will need to click Accept and Send again to bring the changes into effect 91 Setup a Speed Limit To receive alarm notifications when the device exceeds a predefined speed limit you can setup a maxim speed limit Speed Limit o n SB Enter the speed in km h and click Alert When Exceed Speed Limit to send the configuration command to the device To cancel a maximum speed limit enter 0 km h and click Alert When Exceed Speed Limit to send the configuration command to the device Setup Power Saving Mode Choose from the power saving options Other Options GPS always on O GPs always off O Get GPS even min Apply Device Settings GPS Always On default The GPS module of the device will stay powered on all the time scanning for GPS satellites and save positions continuously GPS Always Shut Down This will keep the GPS module powered off It will only wake up if an alarm has been triggered or it receives Location or Tracking commands The time to get positions will take longer due to cold start of the GPS module If no GPS is available at the location of the device you will not be able to receive an actual position Get GPS every min
82. like to receive positions from the device over the tracking period setup in Track Timer To send the Track Timer Interval command to the GPS unit and start tracking click the Start Track button To abort tracking before the Track Timer is up click Stop Track al To manually start Real Time Tracking over GPRS with position updates every 10 seconds click Start RealTime Tracking to end Real Time Tracking click Stop RealTime Tracking 2 Saving PSP Panel lets you configure battery saving modes for Personal Tracking devices Choose GPS Always On default to disable shut off timer for GPS engine Choose GPS Always Shutdown to turn the GPS engine off It will be activated only if the 11 device is been interrogated through tracking commands or the emergency button has been pressed To turn on the GPS engine in a specific time interval select a Wake up Time between 60 seconds and 42 minutes To initialize the device with the power saving settings click Initialize Saving Mode Security AVL Panel lets you remote activate the Vehicle Unit s car security features To turn on security click Activate amp To turn off security features click Disarm l Click Query Status to receive location and information about the current status of the car security Commands Security AR GPS Data Storage Store Data even 30 ojola Z sec GPS Data Storage AVL Panel lets you setup the interval 10 sec 42 min in which th
83. line access with the device required Con lets you setup the Access Point Nod to use online access with the device required Submit User Info lets you initialize your device and synchronize user data information with the database at the Control Base Change Password To change the login password to access your Tracking Websites enter new password and confirm new password Click Change Password to submit the password change 25 Website Status Window Overview The Website Status Window displays time GPS availability and all event reports from the device along with short location details Status information shown with red lights indicates that an event or alarm has been reported for this status TIME Kmoh GPS SECURITY Speeding GEO Fence SOS Accid Battery CarMoved DoorOpen PowerCat soo YX VveevvseES Dean is in Jefferson Ave near intersection 3rd For every received position data or in case of events and activities the following entries will appear in the Status Window TIME Date and Time from the last SOS Shows when the SOS GPS information received at emergency button has been the Control Base activated Kmph Speed of the device from the Accid Shows if the vehicle crash last GPS information AVL models sensors have been activated received GPS Shows GPS availability to Battery Shows if the spare battery of the device at the report time the device is low Security Shows whether vehicl
84. ll be displayed in the map You can add and label as many points of interests as you like Click Return after you finished adding POIs Point Of Interest a wv a POI Label Office To search for POIs you have created type the name or part of the name in the Key field Click Start Search to find the POI from your database The Search Results box will display all POIs with the name you have entered Select and double click at the result from the Search Results box The map window will open an appropriate map extent showing the POI 104 To edit the name of a POI search or locate the POI in the map Click Edit POI Point and ES click at the POI you want to rename in the map In the POI Label field that appears enter the new name you want to give the POI Click Change to rename the POI To move a POI to an different location click Move POI Search or locate the POI in the ED map and click at it Find the new location in the map and click again to set the POI to the new position To delete a POI from your database click Delete POI Search or locate the POI you wish Ex to delete in the map and click at it to remove it Show All PO Hide All Geo Fence Geo Fence ence Show Current Position To view all POIs you have created Show All POI To view Geo Fence areas you have setup in relation to the POIs click Geo Fence To hide all POIs and Geo Fences in the map click Hide All Click Show Current Po
85. map extent showing the history track as a blue line 70 Click Hide Tracking History In Map to remove the track line from the map window Maintaining the History Database For maintenance of the device status database and to increase accessing speed of the History log it is recommended to save and backup device status data periodically Click Backup database to open the maintenance manager j Backup Database Backup tme C Never Bockup C Eve Morth _ Ever Week Week Day Sunday C Evew Ow Time 32 4 Fo m j Backup Mode Copy F Move Choose how to backup your vehicle status data Check Never Backup if you want to leave all data in the log window without backup 71 Check Every Month and select a date if you want to backup your data on a monthly basis Check Every Week and choose a week day if you want to backup your data on a weekly basis Check Every Day and select a time if you want to backup your data on a daily basis Choose between the backup modes Copy will save a copy of the data from the log to a file You still will be able to view the complete history log from the History Panel Move will clear the log from the History Panel and save it to a backup file This option is recommended if your status database is accessed frequently and over long time periods To load and view saved history logs from the database click Import Database Choose which status log you want to open from the backup file li
86. n Online Upgrades frequently to receive newest software and firmware updates from our customer service 40 8 Configuring Modem Connections Preparing GSM Connection To use SMS commands and Tracking features of your Tracking System Server software you will need to connect your PC server to a GSM modem or terminal The Tracking System Server software can automatically detect and use GSM modems from various manufacturers Siemens TC 35 T and up Telit GM 862 WAVECOM GSM modems The Tracking System Server software allows you to add and utilize up to 8 GSM terminals for SMS data exchange For installation and operation of GSM modems or terminals please refer to instructions and manuals provided by the manufacturers When you apply SIM cards to your GSM device please make sure that the SIM card can operate without entering PIN and has unlimited SMS Data feature enabled ask the GSM service provider to do this before you can use it in connection with the Tracking System Server software Ask the GSM service provider for the SMSC number SMS service center number Empty the SMS storage in the GSM SIM card using operational GSM phone please refer your GSM phone manual to do this If you wish to integrate SMS over IP services please contact our customer support or service hotline to receive instructions and customized program items necessary for integration Preparing 56K Modem DTMF Connection For some GPS Tracking models th
87. n flagged until you decide to remove the flags Click Hide All Found in Map to remove all flags from the map window Searching for a Near Place or Map Object In the field Search Layer define a search criteria by selecting the type of map layer you want to search for Select All Layers if you want to search the complete GIS database Search Nearest Nearest Place is INDEPENDENCE AVE SW Distance is 200m Click Nearest from Search Results if you want to find a place or map object next to the result you selected from the Search Results box Click Click Start Point in Map to manually set a location in the map from which you want to search In the Map Window point at the location and click to set the position Click the Search Nearest Object button to start the search The Search Results box will display all places or map objects that comply with the search criteria and contain the name you have entered D a e Double click at the matching name in the Search Results box The map window will open the relevant map extent and the search object will appear flagged with a callout box apru y ASFIDO ns cate cana guess gus 9 MEY emer fh iiron eg y oreo IROA OF ast Daf yt z hdd Aa aa Click Clear All Found in Map to remove all flags from the map window Finding the Shortest Path and Routing Navigate Navigate Device ID Length 5346m Path MOUNT VERNON Go Straight 426m Turn Left STH Go
88. n the Credit field you can view the amount of credit remaining on your SMS account you hold with the service center All short messaging charges for sending SMS commands over the Tracking or Mobile Websites SMS alarm messages for SOS emergency calls and SMS backup messages that are sent from the service center on behalf of your account will be billed there USER DATA Credit Hame Jimmy Ample ceno 181733399997 mo 18175554321 In the Name field enter a name for the holder vehicle or driver using the device This name will appear in all text alarm and location messages received from the device or service center on behalf of your account The CC No field shows the phone number of the service center it will be initialized to your GPS device for use with all tracking command and alarm features 87 In the NO field enter the GSM phone number of the SIM card used in the GPS device smse 18170000100 caet 18175551111 Conta ss Comt3 Address Email xample trackec GPRS uD GPRS Pwd GPRS Dia 99 APN linternet voicescrg In the SMSC field enter the SMS Service Center number for the SIM card used in the GPS device Please ask your GSM service provider to provide this information In the Cont 1 Cont 3 fields enter the numbers of the 3 contact persons authorized to send location requests and commands to the device and receive SMS alarm messages If the SOS emergency button has been pressed the devi
89. ndaries in order to receive alarm messages whenever a device moves in or out of the defined area TE ry Ta Alert when In v To setup a Geo Fence or view all Geo Fence areas for a device click the Show amp Draw GeoFence button and choose the device from the user archive that appears Select a Geo Fence mode o Alert when In will cause the device to send a Geo Fence alert when it enters a restricted area o Alert when Out will cause the device to send a Geo Fence alert when it exits from a predefined area o Alert when In Out will cause the device to send a Geo Fence alert when it crosses the border of a predefined area Point at the current map window Click and hold the mouse button down and drag the cursor in the direction you want to draw the Geo Fence area Release the mouse button to view the rectangular area you want to setup as Geo Fence for the tracking object Repeat these steps if you want to define a new Geo Fence Hr sat Bd Te DOM N MBS EGCOPAL CHUGH wiht pert tioa Pape j Scares se agt a t SA arla prosak ENEO By GE UNSEE PERSE TER t p Finora co cons SRS ve To delete all Geo Fence areas you have drawn for a device choose the device from the user archive and click the Remove Geo Fence button To make Geo Fence areas disappear from the map window click Hide GeoFence B 37 To finish the Geo Fence setup and load the area information to the device open the ID jooooo001 Eii 3 Ey Control
90. ne through Tracking Websites To make the Search Place and Route Calculator available online you will have to do one first route calculation at the Control Base to load topology data into the memory of the PC Server Every time you restart the Tracking System Server you will have to repeat this step 49 Mapping Options To make viewing of street names on your operator map and Tracking Websites more comfortable you might adjust Font names and size used for display m i From the application toolbar click Other Settings or select Other Settings from the Manager Menu 01x El Dasbese l OE ioden Wirt Sever Opton Pend Senet targe E Une Operor Map hee aitti Femme In the Option Manager select Font Name and Default Font Size to display street names Use Zoom In or Zoom Out to see the effect of the changes If you are using the Local Map engine for Search Place and Route Calculator select Use Operator Map in the Option Manager To change the SMS text language for SMS notifications sent from the Control Base select a language from the SMS Text menu Check Auto show device location if you wish to view the position of Tracking Object displayed in the map window every time new GPS data or alarms from a device are received at the Control Base not recommended for services with high communication traffic If you are using ArcSDE ArcIMS server to manage your map database and mapping features select Use ArcIMS Serv
91. ng Mode Search POT Geo Fence Device Setup Device Status Password To open the Map Page and view updated positions in the map press See Map Press Show GPS Position to receive latest position updates from the server 113 NOTE Most mobile browser do not automatically refresh Web Pages If you are tracking a device over a period of time use Show GPS Position repeatedly to show updated positions on the map Additional GPS and status information for every position can be viewed when you press_Device Status in the Main Page 32 Device Setup and Alarm Configurations from the Mobile Website Your Mobile Tracking Website allows you to setup various alarms security and power save modes You can define restricted areas Geo Fences to receive alarms in case the holder of the device is entering leaving or crossing the boundary of an area You can setup a maximum speed limit to let the GPS device report whenever it s holder exceeds the defined speed limit To save battery power you are able to setup sleeping modes for your device Activate or Disable Vehicle Security AVL models If you have purchased a GPS Vehicle Security device and been Get GPS Position logged in to the AVL Mobile Website you can activate or disable Track Timer vehicle security of your device from your GPRS cell phone 0 day f x 0 hour In the Main Page press Security On to activate vehicle security i features and lock the vehicle doors 0
92. ng point You will be redirected to the Map page to view the location From the Map page select Search Place again to search for a second place to define the end point After finishing your search continue with Set as end and you will be redirected to the Map page to see the Path with complete route information street names and distance in meters In addition a colored line will show the route in the map To add a location from the search results to your list of POIs Point of Interest mark the result from the search result window and select Set as POI In the POI page that follows key in a name to label the POI and save it to your database To create a square sized Geo Fence area around the search result choose the result from the search result window and select Set as Geo Fence Select Main Menu to return to the Main Page 29 Mobile Website POI Page The POI Page allows you to create label and edit point of interests and save them to your personal database Name Seach Result as POT Curent Position as POT Search POL Rey Begin Search Rekte POT Edit POI Label Show POI Main Menu To create a POI at a search result you found with the Search function press Search Result as POI To create a POI at the current GPS position select Current Position as POI In the Name field enter a name you want to give the new POI and select OK to add the point to your database To search for POIs you created
93. nutes in the Get GPS every min field To initialize the device with the power saving settings click Apply Device Settings Website User Data Panel Overview The Website User Data Panel allows you to access your user database in order to view and modify SIM card and GPRS settings contact information and passwords and synchronize them with the user database at the Control Base All changes must be submitted before they come into effect Credit Name CC No NO SMSC Cont 1 Cont 2 Cont 3 Address Email ulID Pwd Dial APN shows the credit from the user account available to send SMS commands USER DATA lets you change the name of the device holder shows SMS terminal number of Control Base lets you setup or modify the GSM number used in the device required lets you setup the SMS Service Center number of the SIM card used in the device required lets you setup or change the phone number of main contact person required lets you setup or change the phone number of a 2 contact person lets you setup or change the phone number of a 3 contact person lets you enter or change address information ores uD GPRS Ped lets you enter e mail address for password i retrieval OURS Dik lets you enter User name or ID for GPRS pred activation access if applicable lets you enter Password for GPRS activation access ter PW if applicable lets you setup the GPRS dial number to use on
94. o view a Geo Fence area on the map choose the Geo Fence number and select Show Geo Fence To delete a Geo Fence you created choose the Geo Fence number from the Geo Fence list and select Delete Geo Fence Mobile Website Device Setup Page User Name Dear Phone Number 15175554321 Contactl GSM Senvce NO 18175000000 Control Center 13760252803 v Max Speed 145 GPRS PWD APN internet yoecescream com GPRS Dial NO ogm g Emad deangitrackmencw com Spare Account 477 8 Subst Mam Menu The Device Setup Page allows you to access your user database in order to view and modify SIM card and GPRS settings contact information and passwords and synchronize them with the user database at the Control Base All changes must be submitted to the device before they come into effect User Name lets you change the name of the device holder Phone Number lets you setup or modify the GSM number used in the device required Contact 1 lets you setup or change the phone number of main contact person required Contact 2 lets you setup or change the phone number of a and contact person Contact 3 lets you setup or change the phone number of a 34 contact person GSM Service No lets you setup the SMS Service Center number of the SIM card used in the device required Control Center shows SMS terminal number of Control Base Max Speed lets you enter a maximum speed limit for the device GPRS USID lets you enter User name or I
95. on of your device as starting point click From Current Position E Click Search Result as Start BBif the location from the Search Results window shall mark the starting point Click Search Result as End if the search result shall mark the end point Click Use Mouse Set Start Point a to manually set a starting point on the map Click Use Mouse Set End Point if you want to manually set the end point on the map Select if you like to calculate the shortest or fastest route between the points and click Calculate Route The Route Results window will display the complete route information street names between the two selected points and the distance in meters In addition a colored line will show the route in the map window SEARCH MAP Sech for Places Type All Seaech Results Pret Prev P Next La Seach Wea Paces Type Stale v Too Name Distance RoutePlanner A Shortest O Faste ED a Lenath m To revert to the current GPS position centered on the map click Show Current Position To hide all search results and routes in the map window click Hide all Found 21 Website POI Creator Panel Overview The POI Creator enables you to create label edit and move individual points of interest saved to your personal database Click Add POI then point and click in the map to add a new point of interest In the New POI Label field that appears enter a name you want to give this POI
96. ose another result from the search results press Search Place again To scroll through the complete list of search results if applicable use key a page number of the Search Results box and click Go or use Prev and Next to scroll through the pages one by one To view the current GPS position centered in the map press Show GPS Position Type All v Key Lincol Search Place Total 12 Page 1 Go LINCOLNIA SCHOOL LINCOLN MEMORIAL LINCOLN TEMPLE UNITED C LINCOLN ROAD METHODIST Prev Next Show Place Route Planner Shortest O Fastest Set as start Set as end Set as POI Set as Geo Fence Main Menu Using the Route Planner To calculate a route between two locations use the search function to search a start point Choose and check if you want to calculate the Shortest or Fastest route between start and end point Select from the Search Result box and press Set as start Search for another location to define the end point Select from the Search Result box and press Set as end You will automatically be redirected to the Map Page The map extent will display the route as a colored line and below you will find route information directions and length Refresh Show GPS Position Level 7 Y Zoom to level Zoom In Zoom Out Up Down Right Left View Size Search Place Clear Found Path LINCOLN MEMORIAL Go Straight 173m Turn Example Uae Wa Search Place Clear Found Path LINCOLN
97. ount you hold with the service center All short messaging charges for sending SMS commands over the Tracking or Mobile Websites SMS alarm messages for SOS emergency calls and SMS backup messages that are sent from the service center on behalf of your account will be billed there To update and send all contact information and device configurations to the GPS device press Submit Change Login Password To change your login password to access Tracking Website and Mobile Website go to Main Page and press Password Password Confirm Submit Main Menu Enter a new password in the Password field and confirm by reentering it in the Confirm field Click Submit to bring the change into effect Next time you want to login to any of the Websites you will need to enter this password Press Main Menu to return to the Main Page 118
98. own and drag the mouse in the direction you want to move the map extent Searching for a Place or Map Object Q Click the Search Map button from the function bar to open the Search Map panel From the Type menu choose from the list of available search criteria by selecting the type of information you want to search for Select All if you want to search the complete GIS database Search For Places Type All v Key Capitol In the Key field enter the name or parts of the name of the search object The more accurate and complete the name you entered is the faster and fewer are ges the search results displayed in the Search Results box Click the Search button to start the search Search Results CAPITOL CHILDREN S 4 CAPITOL HILL PRESB CAPITOL HILL UNITED CAPITOL HILL METRO CAPITOL BAPTIST CH CAPITOL ASSEMBLY The Search Results box will display all places or objects from the GIS database matching the search criteria and contain the name you have entered Select and double click at the result from the Search Results box The map window will open an appropriate map extent and the search object will appear flagged with a callout box 95 To scroll through the complete list of search results use the First Prev Next and Last buttons ga VEHICLE TRACKING WEB SAW PRE ey Teas OF AST MES EE OPAL CHUN musnesros s a bad Jsa monga Ea er a rrani k Pa CAME neta oa CHO B e BE PE
99. rch for POIs you have created in the Tracking Web or Mobile Website type the name or part of the name in the Key field Click Begin Search to find the POI from your database The Search Results box will display all POIs with the name you have entered Select the result from the Search Results box and press Show POI to view it in the map To edit the name of a POI search and select the POI from the Search Results box Press Edit POI Label A new field will appear allowing you to enter the new name you want to give the POI Press Edit POI Label again to bring the change into effect Name Search Result as POI Current Position as POT Search POL Key o Begin Search Delete POI Edit POI Label Show POI Main Menu To delete a POI from your database search and select the POI from the Search Results box Press Delete POI 112 31 Locating and Tracking from the Mobile Website Your Mobile Tracking Website allows you to send locating and tracking commands to your GPS device in order to receive location details and view updated GPS positions on the map You can send single location requests and setup tracking schedules to record positions into your location database Locating and Tracking a Device To send a single location request to the device press Get GPS Position in the Main Page Shortly you will be able to view an updated position shown the Map Page along with date time location details and status informa
100. re Requirements 34 Internet Information Services IIS supplied with Windows Server installation disc Windows Internet Explorer 6 0 optional ArcSDE map database server optional ArcIMS 4 01 Internet map server optional ArcGIS Desktop optional MS SQL 2000 Server optional XML file editor UltraEdit recommended If you wish to integrate third party server components like ArcSDE and ArcIMS please contact our customer support or service hotline to receive instructions and customized program files necessary for integration The following installation steps will not include instructions to install or integrate third party software to your system architecture The addition and outsourcing of server components can be completed at any time after the initial installation process System Preparations 1 If you have an earlier version of TSSR server software It is recommended that you uninstall any previous version of TSSR server software from your PC server before you install a new copy You can choose to uninstall previous versions of the software when you run the TSSR 3 1 Setup and Installation wizard Alternately from the Windows Start Menu choose Dir Tracking System Uninstall to run the Uninstall program Completely remove all program files and shared files before you run a new Setup Please check if your Windows Server version has been installed with typical or advanced installation features go to Cont
101. red in the vehicle unit s memory will be transferred to the tracking history database 93 25 Map and Search Features of the Tracking Website Your Tracking Website comes with a variety of useful map tools and functions If your service offers a selection of maps for different countries or cities you will be able to change between maps from the Map menu Choose and click at a map name from the selection and the new map will open in the Map Window Washington g NOTE If you send a location command to your GPS device or wish to view it s last known position you will have to change to a map that covers the area in which the device is located in order to view it s position To view the entire map in the map window click the Full button from the map FULL toolbar Click the Zoom In tool from the map toolbar to zoom into a map extent In the map window hold the left mouse button down and drag to mark the area you want to zoom in You will see a box being drawn When you let go of the mouse button the map will zoom in to the extent you selected To zoom out of a map extent click the Zoom Out button Click and drag in the map to zoom out to the next scale 94 If you wish to choose from a range of preset map zoom levels select from the eight levels right from the map window To grab and move a map extent click the Pan tool from the toolbar Point and OPAN o click at the map window Hold the left mouse button d
102. rol Panel Administrative Tools and check if the program Internet Information Service has been installed if not go to Control Panel Add or Remove Programs and open the Add Remove Windows Components list Check the box Internet Information Services IIS and insert the original Windows 2000 2003 Server Installation CD to install the program Follow the instructions from the Installation Wizard Remove the pre installed Microsoft Framework remoting and security configurations Go to Control Panel Add or Remove Programs and uninstall Microsoft NET Framework 1 x NOTE some Microsoft Server editions use older NET Framework releases which might not be fully compatible with the version required for TSSR 3 1 The TSSR 3 1 Setup program will create the necessary components and Net framework program If you have a previous Net framework version installed on your Windows system it is recommended to remove it before you install TSSR 3 1 35 7 Installing the Tracking System Software The installation of the TSSR 3 1 Server software on your PC server creates program group items for running and operating GPS tracking and database management and Web site publishing During Setup and Installation you can choose if you want to install the software in a different location or program group To install Tracking System Server follow these steps 1 Download or copy the complete TSSR 3 1 Setup folder to a hard drive on
103. rom the application toolbar click GPRS Settings or open the GPRS Settings Manager from the Menu The GPRS Settings Manager will appear By default the Computer IP Address List will list all IP connections available at your PC Server Select or enter the Listening Port number you want to assign to communicate with GPS GPRS Tracking devices Click Stop to disconnect from the GPRS Socket Click Start to open the GPRS Socket port Before you are able receive and send data packages from GPS GPRS Tracking devices all devices have to be configured with the IP address and port number used for data exchange with the Control Base Enter the Default IP 1 address and Default Port 1 used for communication with the devices for direct connections it is usually the same IP address and Listening Port number as above If available enter a backup IP address and port number to let GPS GPRS Tracking devices connect in case the Default Port 1 gets busy or blocked by too many incoming requests Key in the backup port information as Default IP 2 and Default Port 2 If no backup IP and port are available enter the same IP address and Port number as in Default IP 1 To open the GPRS socket automatically when the Tracking System Server software is started check Auto open GPRS socket when software start 46 Configuring Internet Map Server Connection An Internet Map Server connection is necessary to display and operate digital maps on the Tracking
104. rst and SMS alarm messages first hand from the device required to allow user control 53 54 In the Contact 2 NO field enter the phone number of the second contact person authorized to interrogate the device for locations send commands and receive SMS alarm messages from the device optional In the Contact 3 NO field enter the phone number of the third contact person authorized to interrogate the device for locations send commands and receive SMS alarm messages from the device optional In the SMS Service NO field enter the SMS Service Center number of the GSM Service Provider for the SIM card used in the GPS Tracking device required to enable SMS messaging for the device By default the Control Center NO field will show the GSM number of the GSM modem registered and connected to the Control Base If the GPS Tracking device shall be setup on a different GSM modem connected to the terminal you will need to change the Control Center number required Max Speed lets you define and setup a maximum speed limit in km h for the GPS Tracking device If the device exceeds the speed limit alarm messages will be sent to all contact numbers optional In the APN field enter the Access Point Nod address required to use GPRS services with the SIM card used in the GPS Tracking device required for GPS GPRS Tracking units In the Dial Num field enter the GPRS dial number required to use GPRS services with the SIM card used in the
105. rt In the Device D field assign a 8 digit number to the GPS Tracking device you want to add to your database required By default adding a new User Entry will automatically assign a free Device ID You may however type another Device ID if you wish Please note that for every Device ID you can only assign one single device In the User Name field type the name of the owner or holder of the device This name will appear in all SMS location and alert messages sent to the Contact persons In the License field type license or reference numbers optional In the Phone NO field enter the GSM phone number of the SIM card used in the GPS Tracking Device required In the Data NO field enter the GSM data call number of the SIM card used in the GPS Tracking Device required only for GPS Data Call Tracking Units In the Account field enter the account or user name required for login to the Tracking Web Sites required In the Password field enter the login password required for users to sign in to the Tracking Web Sites required The Spare Account field allows operators to enter the credit amount available for the user to send SMS commands and messages over the Tracking Web Sites and SMS alarm messages sent from the Control Base terminal In the Contact 1 NO field enter the phone number of the main contact person authorized to interrogate the device for locations send commands receive SOS emergency calls fi
106. rval you set le To stop the device from sending positions before the initial tracking period is up click the Stop Track button Use this button also to stop the Auto Tracking feature when an SOS Emergency call has been triggered from GPS devices o To track a device in Real Time Tracking mode click Start Real Time Tracking This will send a command to the device to go GPRS online and keep sending data every time a new GPS position is available ca 10 seconds E To stop tracking in Real Time Tracking mode click Stop Real Time Tracking The device will go offline and discontinue sending GPS data lo To view the last device status information of all tracking objects within a specific oh 15 Using the History L og area use the View Status In Area tool from the toolbar Point and draw in the map to mark an area and see all devices and status information ithin thi P r ene ya aS i Viewing and Storing the Tracking History of a Device Tracking Syaa Oparatar Window 3x Every incoming report and event from devices connected to your database will be recorded in the Aji pie Molose Mire Menga Hele 0x Tracking History log It allows you to view and arrange tracking history entries select multiple SQ PTS SNM SB wren iuan fF q E entries to be viewed on the map and to view complete history tracks for individual devices over a chosen time period on the map Open the History Panel The History log with all data entries and
107. se GIS Modem web Server Onsen EUO sooren a ae Desce ID Account User Name License Piste AML Phone 00000001 Kampie leniery Ample OT 1817555 Eg To add a new user to your database click the Add New User button This will open a new user entry To open an existing user account double click the user entry from the table j To remove a user account from your database search for the user from the table and click ik at the row once Click the Delete User button to remove the account To edit an existing user account search for the user and double click in the table to open the User Archive entry oy To search the user database choose a category from the Search menu Enter search key in the Key field and click Search Database to start the user search Click Show All to view the complete user database 55 11 Initializing GPS Devices To initialize a GPS Device from either the Tracking System Server or the incorporated Websites you will be required to have finished all necessary setup and configurations as described in the last chapters NOTE To initialize a GPS Device the device must have been properly installed and set up prior to initialization through Control Base For initialization GSM network with adequate signal strength for both GPS devices and GSM terminal of the Control Base is required From the Control Panel in your Tracking System software select the Device ID of the GPS
108. show the route on the map window To hide search results and routes in the map window click Hide All Found In Map 14 GPRS Panel Overview The GPRS Panel enables you to monitor TCP activities communication with GPRS enabled tracking devices Field Search helps you searching for devices from your user database according to specific parameters lets you enter the name or parts of the name you search for in conjunction with the parameters set above Click the Search User button to start the search To view all users of your database click Show All Users amp All active devices that are currently online and communicating over GPRS socket will be shown with yellow light bulbs adjacent to the Device Ids Grey light bulbs indicate that no GPRS connectivity is recorded If units are currently being upgraded with new firmware versions the download status can be monitored at the Upgrade bar over the GPRS socket used for PS GPRS MW Search A History KIC Socket Control Field Device ID Key ie as HG Device D User Name 00000001 brrrry Ample Current Device None Upgrade Device Status Log Overview The Device Status Log shows all current activities and events happening to the GPS devices from your database Use the scroll bars to move through the complete table wice ID ___GPS Sent GPS Available sos Out Of Area j Speeding Latitude jl j 00000003 20
109. sition to view and center the last known GPS position of your device in the map Sending SMS Text Messages The SMS Editor allows you to send SMS text messages from the Tracking Website SMS charges will automatically be billed to your user account at the service center SMS EDITOR In the Text field type the SMS text you wish to send Enter the phone number of the recipient into the No field Click Send Short Message to send the SMS to the recipient a 105 28 Using the Diagnostic Program and do Online Device Upgrades from the Tracking Website You can run a diagnostic program for your device from the Tracking Website in order to monitor and evaluate GPS availability GSM signal strength Hot start time to get GPS fix and check functionality of buttons on the device All information will be received through GPRS connection from the devices GPRS required From the Login page enter your Account Name and Password select the device type you want to test PSP for Personal Tracking devices or AVL for GPS vehicle units and click Diagnostic to access the testing program The testing program includes fields for GPS satellite information GPS module status GSM signal strength indicator and device function buttons Click Begin Test to send an SMS command to the device in order to let it go GPRS online and switch to testing mode The diagnostic program will start showing all available satellites GPS and GSM signal strength
110. st 72 16 Accepting Events The Device Status Log below the map window enables operators to view the current status and events for all devices from your database select devices for viewing positions in the map creating Geo Fence areas or for use with Search from current position and accept events reported from the devices Whenever a new event or activity is reported the information in the row of the relevant Device ID will be updated To identify if events like SOS emergency call or vehicle security violations have been noted and accepted from operators at the Control Base an event notification icon will appear in the Device ID field and an alarm sound will be played As an operator you will need to confirm every incoming event by clicking the check box left beside the icon either from the Device Status Log or from the History Log The icon will stop blinking and the alarm sound will be turned off The log will record this acceptance as Event Completed in the History Log GPS Sent GPS Awolodle Daor Lock Engne or Cogoomooe 2005 04 201 True Tr True True Fale dowo 200503110 True Tr True Foia Fal B 0000000 005 03 09 0 True False False Fae B 00000004 200503090 Tue False False Foue Fals E oomoos 20050 090 True False False Foue In addition to the event notification icon in Device Status Log and History Log all incoming alarm messages can be viewed in the Event window It will show Device ID event informat
111. status of an AVL Vehicle Tracking device SMS Panel version in Options must be set to AVL open the Control Panel and click Query Last Status To view the updated location on the operator map select device and click at the table in the Device Status or History Log Use the Device Status log to view GPS content and status information for all devices sorted in order of Device ID number Use the History log if you like to view positions and status content in order of their occurrence 66 Configuring a Tracking Schedule To setup and configure devices to report back in timed intervals open the Control Panel From the Device ID menu select the device ID of the tracking object you want to track ID joooo0001 gt a Ga Phone 18175554321 Set up a time period over which you want the device to report back The Track Timer allows you to select time periods between 1 minute and 45 days 1 65535 min Track Track Timer 0 day Jo hour f1 min Setup an interval in which you want the device to report back over the time period set above The Track Interval allows you to select time intervals between every 30 seconds to every 18 hours 30 65535 sec Track Interval 0 H hour jo min Bo Hsec olowo Click the Start Track button to start tracking the device according to the tracking parameters you set up above The device will confirm the setup by sending one SMS with GPS position and status and continue sending in the inte
112. story m No Event Histor Date Backup ingat Backup Data 68 69 Use the scroll bars to navigate through the History log Click the headers from the status table to change the order of appearance For example click the Device ID header to view the log in order of device IDs Click the GPS Sent header to view the log in order of the time when the report was sent Click First Previous Next or Last to navigate through the pages of the history log Click an entry in the status table to view the last position of the tracking object on the map window To view the history track of the selected device click Show Tracking History In Map to open the Tracking History dialogue box Histery Track jc 13 14 15 16 17 18 19 2 2 22 23 24 25 28 27 28 293 ZD Today 4162003 From the Device ID menu select the device Select a Start Time to define which date and time shall mark the starting point of the history track Choose a date from calendar or click at the date and time values to edit the time Select an End Time to define which date and time shall mark the end point of the history track Choose a date from the calendar or click at the date and time values to edit the time Check Only draw a line if you want to display the history track as a line at once Check Step by Step if you want to view the history track developing step by step Click OK to display the history track The map window will open an appropriate
113. teer Areeta nee F EUU UVVU Cario i peatzy Leegtede 177 27220 Lathucte 71 22200Ounsri locate tes aaay tar te pathy Click Show Current Position to view and center the last known GPS position of your device in the map Click Return to Search to return to the default Search Panel Click Hide All Found to remove all flags search results and route from the map window 98 26 Locating and Tracking from the Tracking Website The Tracking Website provides a variety of tools to send locating and tracking commands to your GPS device allowing you to display past and updated GPS positions on the map You can setup tracking schedules to record positions into your location database in order to view them over a longer period or at a later time You can also track your device instantly in real time GPS availability and GPRS required Locating and Tracking a Device To access the tracking features of your Web site click the Tracking function button To receive the current or last known GPS position of your device click the Get Last Position button to send an SMS command to the unit Shortly you will receive an updated position shown as a flashing black dot in the map window along with date time location details and status information from the device NOTE To receive an actual position from a GPS device a valid GPS signal must be available at its location If no GPS is currently available you will r
114. th a red line Draech Geach Mace Bemi Lave oe Sewth ey Posest SewchNewert l iQ Masser Plame s OE PE MOE CE BE Da Orawie e hw Lorgt tya a Pet AI VERa Mao Preg ihn Tun Let Pti megt bir Tor Reg Hede dd Foams a Map click Begin Navigate Directions and distances to next intersections will be given acoustically according to actual GPS position this feature is currently only available for Asian map databases To start audio Navigation for moving tracking objects during Real Time Tracking Click Clear All Found in Map to remove all points and route from the map window 65 14 Using the Location and Tracking Commands Locating and Tracking a Device To view the last known position of a tracking object on a map search the Device ID from either the Device Status Log or History Log Double click in the table to show the position in the map window including the tracking object as a colored icon along with Device ID GPS date and time memes lt SEN a eons To know the current location and status of a Personal Tracking device SMS Panel version in Options must be set to PSP open the Control Panel and click Get Location This will send an SMS command to the device in order to report back with GPS position and Ger ltnention status To view the updated location on the operator map select device and click at the table in the Device Status Log To know the current location and
115. tion from the device NOTE To receive an actual position from a GPS device a valid GPS signal must be available at its location If no GPS is currently available you will receive the last known position and time stored in the device memory The time to view position updates on the map will depend mainly on SMS messaging speed and can take up to 20 60 seconds To setup a tracking schedule to report back in timed intervals you can setup Track Timer and Track Interval by selecting designated time parameters The Track Timer allows you to select time periods between 1 minute and 45 days 44d 23h 59m Setup an interval in which you want the device to report back over the time period set above The Track Interval allows you to select time intervals between every 30 seconds to every 18 hours 17h 59min 59sec Press Start Tracking to start tracking the device according to the tracking parameters you set up above The device will confirm the setup by sending one first SMS with GPS position and status and continue sending in the interval you set To stop the device from sending positions before the initial tracking period is up press Stop Tracking Tracking System Dean is nearby Longitude 000000000 Latitude 000000000 See Map Get GPS Position Track Timer 0 v day O Y hour O min Track Interval O Yi hour O Yimin 30 sec Start Tracking Stop Track Start real time tracking Stop real time tracking Savi
116. to a file click the Print Map button afl This will open a Pop Up Window with the current map extent and printer options To return to the login page click Home Website Function Buttons Overview The Tracking function button opens the Tracking panel with tools to send commands to receive current locations from the device setup timer and interval to track and store location data over a period of time and to view location history from the tracking database The Search function opens the Search panel allowing you to search for locations map objects and do route calculations The POI button opens the POI Creator panel enabling you to create edit and move personal points of interest saved to your own database The SMS Editor allows you to send SMS text messages online to any GSM number you entered Device Setup opens the Device Setup panel where you can draw Geo Fence areas setup Speed Limit alarms and power saving options for your device The User Data button gives you access to your user database allowing you to view and modify SMS and GPRS settings and add or change Contact phone numbers Website Tracking Panel Overview The Website Tracking Panel enables the users to send location requests setup tracking schedules track vehicles in real time mode and view tracking history over a period of time Get Last Position sends an SMS command to the GPS device Track Timer Track Interval lets you setup the interval in
117. to start from the Search Results window Use Click Start Point in Map to manually set a start point on the map Click Search Nearest l to start your search enables you to calculate and display the shortest distance and route between two points in the map To start navigation from the current position of a device select the Device ID by clicking on the relevant row in PA apes Mi search a History 4 Search Search Place Search Layer ap Layer E Search Key Search Nearest Neagate Nevigate Device ID Hide All Found in Mao the Device Status Log Click the Start from Device button lto mark the starting point Click Start from Search Result lif an object from the Search Result window shall mark the starting point Click End at Search Result l if the Search Result shall mark the end point of the route Choose Click in Map to Set Start to manually set a starting point on the map through mouse click Choose Click in Map to Set End if you want to manually set the end point on the map through mouse click Click Find Shortest Path to start route calculation and receive directions Click Begin Navigation amp to receive audio directions during Real Time Tracking currently only available for use with Asian map database The Shortest Path Results window will display the complete route and direction street names between the two points and the distance in meters In addition a colored line will
118. ts AVL car theft or tow away AVL Every time you make changes on SIM card details GPRS dial in information and Contact numbers you will need to reinitialize the device with the new configurations Changing Your Login Password To change your login password to access both the Tracking Website and Mobile Website enter your new password into the New PW field Confirm the password change by reentering it again in the Confirm field New PW Comfmn Change Password Click the Change Password button to setup the new password The next time you log in to the Tracking Websites you will be asked to enter the new password accordingly 89 24 Device Setup and Alarm Configurations from the Tracking Website From your Tracking Website you are able to setup various alarms security and power save modes You can define restricted areas Geo Fences to receive alarms in case the holder of the device is entering leaving or crossing the boundary of an area You can setup a maximum speed limit to let the GPS device report whenever it s holder exceeds the defined speed limit To save battery power you are able to setup sleeping modes for your device To access the device setup features click the Device Setup button to open the setup panel Setup Geo Fence Areas For every GPS device you can create and load up to 4 Geo Fence areas Using the Geo Fence tools you are able to draw Geo Fence boundaries in order to receive alarm m
119. u will receive an event entry in the device status z ag A log Event Window and History log Essa aa critical battery power the device will send a Car Moving alert to 7 atere plian aleu the Control Base On the operator side you will receive an event a entry in the device status log Event Window and History log Ga Eogemeo E Evenn E Ss T Vehicle ID GPS Sent GPS Available Received From Active Door Lock Engine Off sos Ost 0001 11 2003 14 10 12 Tr 9495554667 True False True False Vehicle ID GPS Sent GPS Available Received From Active Door Lock Engine Off sos Oost 0001 1 10 2003 13 36 01 Tre 9495554667 False False False False Confirm that you accepted the alarm by clicking the check box in the Device ID field At the same time your Control Base will send an SMS text message to all Contact numbers from the User account Vehicle Is Moving with Security On riamn Confirm that you accepted the alarm by clicking the check box in the Device ID field At the same time your Control Base will send an SMS text message to all Contact numbers from the User account 00 GPS Car Aare Cor Mering If a vehicle is moving or being moved with GPS vehicle security on the device will send a Car Moving alert to the Control Base On the operator side you will receive an event entry in the device status log Event Window and History log Ta ageh f cone E Se Vehicle ID GPS Sent GPS Available Re
120. unication is a globally accepted standard for digital communication using a cellular network 33 6 Installation Preparations Recommended System and Hardware Requirements The TSSR 3 1 Tracking System Server has the ability to be run as a complete stand alone service system with integrated map engine database and Web server on one single CPU The application and scope of services however will be limited and confined by hardware capacity and security vulnerabilities For use in professional service center facilities we recommend to outsource vulnerable service components like user and map databases to separate servers on a secure network The TSSR 3 1 provides all necessary integration tools to utilize third party server software from ESRI Inc and MS SQL To install the TSSR 3 1 your PC Server is required to meet the following minimum system requirements Pentium 4 Processor 2 00 GHz or higher Operating System Microsoft Windows 2000 or 2003 Server XP Professional optional with limited user logins RAM 512 MB 1 00 GB optimum Graphic Card 16 MB or higher Broadband Internet connection upload speed 500 kb s 1 Mb s depending on scope of service Fixed real IP address or domain 3 free internet ports not firewalled Free Disk Space for Control Base software and Web Sites 25 MB without maps GSM Terminal preferred Siemens TC 35 or higher or SMS over IP gateway SMS enabled GSM SIM card Softwa
121. ve drawn click Show All To hide all Geo Fence areas in the map click Hide All Security AVL devices only enables you to remote setup vehicle security on your device Click Arm to activate vehicle security features Click Disarm Eho disable vehicle security Data Storage A VL devices only lets you setup the interval 60sec seui D OD 42 min in which the unit shall store GPS positions Sa and status data to its memory To activate data Date Storage WP Oi storing click Start Storage E To stop the unit from O a storing data click Stop Storage EB To upload all Speed Une O kah data from its memory to the history database and clear the unit s memory click Upload Storage 2J 23 Speed Limit GPRS required lets you define and setup a maximum speed limit for the device If the device exceeds the speed limit alarm messages will be sent to all contact numbers Enter a speed in km h into the field and click Alert when exceed Speed Limit E to send the speed limit to the device Other Options lets you configure and setup battery saving modes for your device Choose GPS 24 Always On default to disable shut off timer for GPS engine Choose GPS Always Off to turn the GPS engine off It will be activated only if the device is been interrogated through tracking commands or the emergency button has been pressed To turn on the GPS engine in a specific time interval enter a time between 1 minute and 42 mi
122. which you like to Start Real Time Tracking GPRS required Clicking the Start Real Tracking History enables you to view the tracking history of 20 TRACKING in order to receive the latest available GPS position and display it on the map lets you setup a tracking period over which you like to receive positions from a device You can choose a time ranging from 1 minute to 45 days using the M minutes H hours D days menus Ga Laat Postion vm receive positions from the device over the tracking period setup in Track Timer To send the Track 0 m DMs Timer Interval command to the GPS unit and start wma tracking click the Start Track button To abort Tracking History f n PRG Pastory tracking before the Track Timer is up click Stop sret mms Track LX Time Tracking button BF will send a command to the unit to let it go GPRS online and send GPS location and status data every 10 seconds approximate time You will be able to trace the track of the device in the map window To stop the live tracking click Stop Real Time Tracking oe your GPS device in a defined time period From the Start Time menu choose a date and time to start the history track of the device From the End Time field choose date and time to end the history track of the device Click Show History to view the tracking history as a colored line in the map window Click Geo Fence to display all Geo Fences currently loaded to the
123. ystem server go to Help menu About Sending Firmware Upgrades to Devices To know the firmware version installed in a device check the Version entry in the Device Status Log or History Log hegas teme ba Hew Lathato apte gr Coren Hasli neat qme 79 In the Control Panel select the Device ID of the device you want to upgrade and click Upgrade Device This will send an SMS command to the device to let it go GPRS online and prepare to receive the upgrade package ID oooo0001 oat es Phone 19175554321 NOTE During the period of downloading and upgrading a device all alarm functions and tracking features will be disabled Upgrading a device might take 10 to 15 minutes After completion all original configurations will remain in the units unless otherwise stated in the firmware release notes Vehicle Security and tracking schedules will also resume after completion and automatic restart of the units To check if the devices were successful connecting to W GPRS Search E History I4 gt the GPRS socket on the Control Base and view the 5 1 control download progress open the GPRS panel Search Field Device z and select the device to be upgraded and check if it Device ID z is connected to the server A yellow bulb in the Key 4 e Device ID field indicates that devices are connected Click at the row to view the download progress in the status field below 3 00000001 X Ample 00

Tracking System Server TSSR 3.1

Contents

Download Pdf Manuals

Related Search

Related Contents