Manual (english)
Contents
1. like ending a Turntable Press PLAY PAUSE again to stop the effect DSP Reverse Press REVERSE to play the track backwards If you press this button again you stop this effect Scratch button Press SCRATCH to activate the Scratch Pitch Bend and Search mode You control these effects with the JOG WHEEL If the indicator is off the player is in Pitch Bend mode Press SRATCH again to change to Scratch mode Press SCRATCH a third time to get to the Search mode Jog Wheel Shuttle wheel Controls the mode selected with the scratch button Scratch Search Pitch Bend Cue button Press CUE while playing the track to jump back to the point where you have started the track Play Pause button Every time you press this button you change the mode from Play to Pause or Pause to Play Direct Access buttons With the buttons 0 9 you can select the tracks of the CD direct Display The display shows the track Track number time remain pitch continuous or single play 8 16 sinus 17 18 19 20 21 22 23 018 E 0 E J e 36 38 Piteh Control Use this fader to increase or decrease the speed Re Loop button This button is used to start the last recorded Loop To release the Loop press RE LOOP again Loop in button With this button you can confirm the starting point of the Loop recording Loop Out button If you press this button you set the ending point of the Loop recording At the same time you sta2. sinus Manual Audio player CDXS 1000 1 sinus Table of contents Safety instructionsi i ira ie i a td eil a 3 1 1 Instructions for a safe and efficient operation Be careful with heat and extreme temperature 3 1 2 Further Safety instructions sorsra ieh 4 1 2 1 Satety related red fl gs accion i be aan 4 1 2 2 DeSIQMated USC iis cc nennen 4 2 MOUCHO cacian A T T 6 e GONNBGtONS L ik sys dacs aa a a aaa is aaa ss ad 6 3 1 Electrical COnmOCtiONS ur iii 6 4 CONTO faceted sarasa is ao o iai is i a a a a iaia 7 5 Fronts G L a is asai La ano iii a Di Tas ia aa ia 10 6 Mixer SEHON Limissias anai kan iniai an a k i aid Ein ae 11 T BaCk Sdan basi ansas i das as Di das ii ba nn sea i ii ida 13 2 16 rus 1 Safety instructions e This Device is suitable for indoor use only e All modifications will void the warranty e Repairs have to be carried out by skilled personnel only e Only use fuses of the same type and original parts as spare parts e Protect the Unit from rain and humidity to avoid fire and electric shocks e Make sure to unplug the power supply before opening the housing 1 1 Instructions for a safe and efficient operation Be careful with heat and extreme temperature Only use the device in a place where no extreme temperatures will occur Do not keep it in a temperature bellow 32 F 0 C or exceeding 104 F 40 C Avoid exposing it to direct rays of the sun or near a heati
3. nel 1 and channel 2 High Here you can raise or lower the high frequencies Mid Here you can raise or lower the mid frequencies Low Here you can raise or lower the low frequencies rus 12 13 14 15 16 17 Cue Mix Pgm Control With this control you can set the balance between the master and the cue signal The output is via the headphones Cue for Ch 1 2 Here you can choose the input source for the headphone cue setting Fader CH 1 2 With this fader you can control the volume of the channel Fader Start If you activate this option the CD Player starts if the crossfader is moved The crossfader starts the corresponding CD player if it is moved from left to right and back Crossfader This fader produces the crossings between the input sources Left chooses the left channel channel 1 and right the right channel channel 2 Is the crossfader set to the middle position both channels are played with the same volume Use the crossfadder to produce smooth fades iPod Dock Connect your iPod with this dock and choose your source with SOURCE and INPUT TOGGLE Note Some DJ functions are not supported if you use an iPod or iPhone 12 16 Gros 7 Back side 18 19 20 21 22 23 24 25 26 y CI Ww N a RI ad y Wy BR w RI LY Oy O D Power supply Use only the included power cable Power button With this butt
4. ng appliance Keep away from humidity water and dust Do not place the set in a location with high humidity or lots of dust Containers with liquid should not be placed on the set Avoid placing it on un stable location Select a level and stable location to avoid vibration Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust Metall Parts can be cleaned with a wet soft cloth for stubborn dirt If out of work contact sales agency soon If any troubles occurs remove the power plug immediately and contact with an engineer for repairing do not open the cabinet by yourself it might result a danger of electric shock Take care with the power cable Never pull the power cable to remove the plug from the receptacle be sure to hold the plug When not using the device for an extended period of time be sure to disconnect the plug from the receptacle IMPORTANT Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Make sure the electrical connection is carried out by qualified personnel All electrical and mechanical connections have to be carried out according to the European safety standards 3 16 Gros 1 2 Further safety instructions IMPORTANT Keep away from water and humidity Make sure to unplug the power supply before opening the housing Please read careful through this manual bef
5. on you switch the device on or off XLR balanced Balanced XLR stereo connections Signal output Stereo Main output Unbalanced RCA connector Line Phono input switch If you have chosen phono the signal is passed directly to the high quality phono preamp Line sources will overload this input Always make sure that you have the line signal selected before you insert a line signal Input Connect devices like tape decks a CD player or a Turntable USB Out Connect a USB cable with this output Plug it to the other side to a USB port of a PC The midi mode is activated and enables the control via Virtual DJ Your device was shipped with an LE version of Virtual DJ You can install and activate this version by entering the serial number of your device Follow the instructions on the screen to complete making your device to a midi unit GND Connection for Earth Ground for turntables DJ Mic Here you can connect a DJ microphone via XLR Connector 13 16 sinus 14 16 sinus 15 16 Gros Importer B amp K Braun GmbH IndustriestraBe 2 D 76307 Karlsbad www bkbraun com info bkbraun com RoHs m en 16 16
6. ore the first start up All persons which are entrusted with installation start up operation maintenance and repair of this device have to e Show acorresponding competence e Follow the lines of this manual e Face this manual as part of the product e Keep this manual over the lifetime of the product e Pass this manual to new owners of the device e Download the latest version of the manual 1 2 1 Safety related red flags IMPORTANT Handle carefully with dangerous electric voltages With this voltage there is the danger to get a life threatening electric shock Always observe After taken the device from a cold room to a warm room it is not allowed to activate the device It is possible that thereby emerged condensed water damages the device Activate the device not until it reached ambient temperature Prevent that the power cable has contact with other cables Handle carefully with power cables and power connections Don t touch them with clammy hands Make sure that the voltage which is to connect does not exceed the specified values Make sure that it isn t possible to squeeze or damage the power cable with sharp edges Assure yourself with regular checks that there are no damages to the power cable or the device Don t switch the device in short time intervals e g in second cycle on and off Keep away children and laymen off the device 1 2 2 Designated use This device was developed for professional u
7. rt the Loop playing To release the Loop press LOOP OUT again Pitch button This button switches the Pitch fade on or off Pitch Bend button The speed decreases while the button is pressed If the button is released it jumps back to old speed Pitch Bend button The speed increases while the button is pressed If the button is released it jumps back to old speed 9 16 sinus 5 Front side 24 CD Tray Here you can insert and load the CD 25 Mic Input Here you can connect a microphone with a 14 jack 26 Mic control Here you can control the volume of the microphone 27 Cue Level Control With this control you can control the volume of the headphones 28 Headphones Here you can connect headphones with a jack 10 16 Gros 6 Mixer Section 10 11 A X T DT i RELAY ng K FADER Source button Press this button to select between CD USB iPod or Midi USB Port Here you can connect a USB stick Note This connection does not support external hard drivers CD LED This LED illuminates if the CD mode is activated USB LED This LED illuminates if the CD mode is activated Input toggle switch Choose which input you want to control live LED meter This meter displays the output level of the master Master Level With this control you can set the output level of the master output Ch1 and Ch2 Gain With this controls you set the input level of chan
8. se on stages in discos theatres etc The device is only approved for a connection up to 230V 50 60 Hz AC voltage and only for indoor use Regular breaks during operation increase the lifetime of your device Avoid convulsions or any form of forceful impact during the installation or the start up of the device 4 16 Gros Make sure that the device is not exposed excessive heat humidity or dust at the place of installation Take care that no cables are lying around You would endanger your own safety and also the safety of a third party It is not allowed to operate or store the device in an environment in which spray water rain humidity or fog is expected Humidity or very high atmospheric humidity could reduce the isolation of the device and could cause deathly electric shocks If you use fog devices the device has not be exposed to a direct smoke jet There has to be a safety distance of at least 0 5m between this device and the fog machine Make sure that the saturation of the fog has to enable a visibility of at least 10m The ambient temperature has to be between 0 C and 40 C Avoid direct sunlight and close proximity to heaters You have also to attend it during the transport in closed motor vehicles You have to attend that with an ambient temperature von 40 C it is not allowed that the relative humidity exceeds 50 Operate the device not during thunderstorms Surge voltages could destroy the device Unplug the power supply d
9. to eject or load the CD Every pressing opens or closes the drive Note The drive does not open until you have pressed STOP or PAUSE 2 Time button Use this button to define the time mode There are three modes with every press of the button you change the mode Elapsed Time Elapsed time of the Title Remaining Time Still passing time of the Title Total remaining time Time until the end of the medium 3 Single button Use this button to choose between the modes SINGLE and CONTINOUS PLAY The relevant mode can be read on the LCD display In single mode the device stops after every track In the continuous mode the device stops at the end of the medium 4 Repeat button Use this button to repeat one or all tracks of the medium 7 16 rus 5 Prog button 10 11 12 13 14 15 16 In this mode you can program up to 20 tracks that are played one after the other e Press STOP e Press PROG e Use TRACK SELECT Buttons to choose the required song and press PROG again e Repeat these steps until you have save all required tracks e Press PLAY PAUSE to start the playing Folder button With this button you can navigate through the folder or USB or CD Search lt lt gt gt button Search forwards or backwards through the current track Track Select lt lt gt gt button With this button you can choose the previous or next song DSP Brake In playing mode first press BRAKE and then PLAY PAUSE The effect sounds
10. uring thunderstorms Surrounding objects or surfaces should not be in contact with the device Make sure that during the installation and removal of the device the area below the place of installation is basically cordoned off This also applies to implementation of service Make yourself familiar with the functions of the device before start up People without the experience should not handle with the device The most cause of functional disorder is inappropriate handling Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust or a wet soft cloth for stubborn dirt For transport use the original packing or designated accessory to avoid damages during the transport For reasons of safety unauthorized changes are forbidden A usage of the device which differs from usages which are described in this manual can cause damages of the device In that case the warranty expires Additional you should notice that every differed usage is related with dangers and can cause e g an electrical short fire electric shock or crash 5 16 Gros 2 Introduction Thank you for buying the Audio player CDXS 1000 It is a powerful device For a successful installation and operation please read this manual carefully 3 Connections 3 1 Electrical connections Connect the fixture to the mains with the enclosed power cable and plug 6 16 sinus 4 Control 1 Eject button Press this button
Download Pdf Manuals
Related Search