Instructions Manual
Contents
1. 10 DCI BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject MaiA Dear music lover thank you for purchasing a Pro Ject Audio Systems integrated amplifier In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the unit or possible misuse nes Important notice Safety instructions AC outlet voltages vary from country to country Before connecting to the mains make sure that the voltage in your area meets the voltage requirements printed on the power supply The power supply is used to disconnect the unit from the mains Make sure that the power supply is easily accessible at all times Never handle the device the power supply while your hands are wet or damp V Avoid letting liquids enter the device or the power supply Never place any item containing liquid such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Connectors In 1 Phono In2 In3 SIPDIF In9BT Power e er 077 77 07 41 Output CO 0 00 ae mo HM 090 Pro Ject Audio Systems Vienna Austria RoHS oom OO Make all connections except the connection to the headphone whilst the amplifie2. 3V Do not dispose the batteries as ordinary domestic refuse Please dispose your exhausted batteries at the appropriate collection sites usually located at supermarkets and drugstores 4 O Pro Ject Audio Systems gt Pro Ject MaiA Revision 2014 6 5 Technical specifications Pro Ject MaiA Power output Frequency response Channel separation Noise floor THD Gain Line level inputs Line input sensitivity Line input impedance Phono input Phono input sensitivity Phono input impedance Phono input gain S PDIF coaxial input S PDIF optical input USB input USB data transfer Digital to Analogue converter Variable line level output Bluetooth music receiver codec Bluetooth range Speakers connectors Outboard power supply Power consumption Replacement battery remote control Dimensions W x H x D D with sockets Weight Service Should you encounter a problem which you are not able to alleviate or identify please contact your dealer for 2x 25W 37W at 8 ohms 4 ohms both channels driven 20Hz 20kHz 0 3dB 2 5dB gt 65dB at 20kHz gt 90dB A weighted lt 0 07 at 15W 31dB measured via line level input 2 pair RCA 1 jack 3 5mm 350mV 50kohms 1 pair RCA suitable for MM MI or high output MC cartridges 47kohms 40dB up to 24bit and 192kHz up to 24bitand 96kHz USB Audio Class 2 reguires USB 2 0 or higher on computer Asynchronous Cirr
3. r is disconnected from the power supply Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white Never use any other power supply than the one supplied with the unit Line output A power amplifier or active loudspeakers can be connected to the output sockets marked Output Phono input Connect the tone arm signal lead to the In 1 Phono of the amplifier The earthing wire may be connected to the screw terminal if you encounter hum problems when using the turntable Line inputs Line level sources such as CD player radio or TV can be connected to the input sockets marked In 2 In 3 or In 4 Digital inputs Sources with a digital output such as TV satellite cable receiver or a game console can be connected to the digital inputs Coaxial to In 5 and optical to In 6 and In 7 2 O Pro Ject Audio Systems gt Pro Ject MaiA gt Revision 2014 6 5 Connection to a Computer Connect the USB input In 8 USB of the MaiA unit must be switched on to a free USB socket on your computer and turn it on make sure it is powered on Select input 8 USB For Windows operating systems an USB driver supplied on CD has to be installed Mac OS operating systems do not need an additional driver Please note Connection should be made to an USB socket of your computer directly Connecting to USB hubs or switches can cause problems Driver installation Windows ope
4. rating systems only For Windows operating systems a USB driver supplied on CD has to be installed Insert the included CD into the drive of your PC and follow the instructions After installing the driver some settings have to be checked done For example Windows 7 operating system gt Control Panel gt Hardware and Sound gt Sound gt Playback select Speaker MaiA USB 2 0 Audio Out gt Properties gt Supported Formats make sure nothing is assigned gt Level gt Sound setting must be 100 gt Enhancements disable all enhancements gt Advanced gt Default Format set to studio quality 24 192 Mains power connection Connect the low voltage plug from the power supply to the Power socket before connecting the power supply to the mains Connection to the speakers The output terminals accept loudspeaker cables terminated with 4mm Banana plugs spades connectors or naked wire Remote control ON OFF turns the unit on or back into standby VOL ot and adjust the sound volume and or select the inputs 13006 Front panel controls 2 e 8 3 amp 6 46 Ce o a SS E Phono Line Digital USB BT MaiA Pro Ject Audio Systems Pro Ject MaiA Revision 2014 6 5 3 To switch on from standby or to standby The push button on the left side of the front panel turns the unit on or back into standby press and hold to switch into standby mode The blue LED above the stand by push button
5. shows that the unit is switched on Input selector After the unit is powered on pressing the buttons 4 and P gt next to the LEDs inputs indicators selects desired input Volume Adjust the volume to the desired level using the large knob on the front panel Connecting a headphone Connect the headphones to the Vs 6 3mm jack socket on the front of the unit Bluetooth connection Make sure the antenna is attached to its connector In 9 BT on the back panel prior using Bluetooth Bluetooth is activated only when input 9 is selected Pairing with Android devices Open Settings and tap on Bluetooth Turn on Bluetooth and tap on Scan Searched devices will show up Tap on MaiA Enter 0000 if requested and confirm by pressing power button on MaiA as soon as the blue LED of the input 9 starts blinking Once the device is paired it will show Connected to media Audio The device is now ready for playing music via Bluetooth through MaiA Pairing with Apple devices Tap on Settings tap on Bluetooth turn on Bluetooth your device will automatically start searching for available devices Tap on MaiA and confirm by pressing power button on MaiA once the blue LED of the input 9 starts blinking Replacing batteries Proceed as follows e Unlock and slide open the battery case cover e Replace the battery Make sure the battery is the right way round e Close the battery case cover Battery type 1 x CR2032 3V or 1 x CR2025
6. us Logic CS4344 24bit 192kHz Multi bit Delta Sigma type jack 3 5mm aptX A2DP profile 10 meters in direct visibility between source and receiver 4mm banana plugs spades connectors or naked wire 20V 3A DC suitable for your country s mains supply max 3A DC lt 0 5W in standby 1 x CR2032 3V or 1 x CR2025 3V 206 x 36 x 150 165 mm 1250 g without power supply further advice Only if the problem cannot be resolved there the unit should be sent to the responsible distributor in your country Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use Modification or changes to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer Copyright trademarks Pro Ject Audio Systems is a registered Trademark of H Lichtenegger This guide was produced by Pro Ject Audio Systems Copyright 2014 All rights reserved The information was correct at the time of going to press The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development Pro Ject Audio Systems Pro Ject MaiA gt Revision 2014 6 5 5
Download Pdf Manuals
Related Search