SM-192 DMX Controller User Manual Main Features 1. 192 - AV-iQ
Contents
1. 119 TURN ON TURN OFF SCENE 8 CHASE 120 TURN ON TURN OFF CHASE 1 121 TURN ON TURN OFF CHASE 1 122 TURN ON TURN OFF CHASE 2 123 TURN ON TURN OFF CHASE 3 124 TURN ON TURN OFF CHASE 5 125 TURN ON TURN OFF CHASE 6 126 BLACKOUT2. 0mA Min Programming for Scenes Press PROGRAM for 3 second appropriate LED blink which indicates it in PROGRAM mode 1 Scene Programming 1 1 Press SCANNER key to select DMX channel composed of 8 channels 1 2 Select different channel to control several devices at the same time 1 3 Adjust appropriate fades to select desired output level and then turn off fade 1 4 Select and adjust output level continuously until all devices are set 1 5 Press MIDI ADD 1 6 Select desired bank using UP or DOWN 1 7 Press SCENE to store this SCENE Scene Editing 2 1 Select desired scene of bank 2 2 Make program of scene to meet the requirement of device 2 3 Press MIDI ADD 2 4 Press scene to store this scanner Scanner Copy 3 1 If a scanner is set press and hold the SCANNER first 3 2 Press the SCANNER to copy to then the SCANNER is copied to another SCANNER Scene Copy 4 1 Select desired SCENE 4 2 Press MIDI ADD once 4 3 Select one bank Then press the scene to copy to Delete Scene DMX channel incorporated with this SCENE are ser to 0 5 1 Select desired scene 5 2 While pressing and holding AUTO DEL press scene required to be deleted Clean all scene all DMX channel are set 0 6 1 Press PROGRAM DOWN while turning power off 6 2 Turn the power on Copy Bank 7 1 Select desired bank 7 2 Press MIDI ADD 7 3 Select the bank to copy to 7 4 Press MUSIC BANK COPY Delete a Bank Select the bank to be deleted press AUTO DEL MUSIC BANK COP
3. 32 OFF OFF 3 33 48 OFF OFF 4 49 64 OFF OFF 5 65 80 OFF OFF 6 81 96 OFF OFF Ji 97 112 OFF OFF 8 113 128 OFF OFF 9 129 144 OFF OFF 10 145 160 OFF OFF 11 161 176 OFF OFF 12 177 192 OFF OFF Scanners Channel Fade Control LED 1 1 16 ON ON 2 17 32 ON ON 3 33 48 ON ON 4 49 64 ON ON 5 65 80 ON ON 6 81 96 ON ON 7 97 112 ON ON 8 113 128 ON ON 9 129 144 ON ON 10 145 160 ON ON 11 161 176 ON ON 12 177 192 ON ON Press desired scanner corresponding LED is lit and appropriate channels is enabled to be adjusted when scenes are running if fades control is OFF channel output level is not controlled by fades if fades control is ON channel 8 output level is controlled by the fades 2 2 Scene button Press one scene button to run scene or to store scene and the second digit of LCD DISPLAY shows scenes 1 8 2 3 Fade 18 Slide the fades to adjust the output level or DMX channel from 0 to FF 255 2 4 Page Select Press to select page A to page B 2 5 Speed Slider Move the slider to adjust chasing speed 2 6 Fade Time Slider Move the slider to adjust FADE TIME 2 7 LED Display 28 BANK Button fory Press UP or DOWN to increase or decrease BANK the third and fourth digit or LED DISPLAY shows BANK NO 01 30 2 9 Chase 1 Chase 6 Select desired CHASE to be programmed or run CHASE 2 10 Program Turn the power on it is in MANUAL RUN mode press PROGRAM for 2 seconds corresponding LE
4. D blinks SCENE and CHASE are ready to be programmed press PROGRAM once more to return to RUN mode Corresponding LED goes out 2 11 MIDI Add a Press MIDI key when running the third and fourth digit of LED flash select MIDI channel using UP or DOWN press MIDI key once more or any other key excluding UP or DOWN to end the MIDI channel setting b Press this key to make programs when in PROGRAM mode 2 12 Auto Del a In RUN mode press Auto Del corresponding LED is ON which indicates it is AUTO RUN mode press once more to withdraw MUSIC mode corresponding LED goes out b Press this key to make Scene and chase program when in PROGRAM mode 2 13 Music Bank Copy a In RUN mode press this key corresponding LED is ON which indicates it is in MUSIC mode press once more to withdraw MUSIC mode corresponding LED goes out b Press this key to make Scene and chase program when in PROGRAM mode 2 14 Tap Sync Display a In AUTO RUN mode running speed of scene is dependent on the interval of last two pressing of TAP SYNC DISPLAY Max 10 minutes b in PROGRAM mode select display between STEP and BANK in other mode select display between 00 225 and 0 100 2 15 Blackout Press this key to disable channel output but not any other functions Press once withdraw Blackout mode 2 16 MIDI In Use to receive MIDI data 2 17 DMX Polarity Select Select the polarity of DMX output 2 18 DMX Out Use to output DMX data 2 19 DC Input DC 9V 12V 30
5. SM 192 DMX Controller User Manual Main Features 192 DMX Channels 30 Banks each composed or 8 programmable scenes 8 Fades adjusting output level Built in Microphone AUTO mode is controlled by TAP SYNC and SPEED controlled MIDI control through MIDI interface 4 digits LED display Blackout master controlled by Manual or Remote CHASE programming and CHASE running manual control and remote control Fade Time control DMX polarity selects Se Oe Oe Technical Specification 1 POWER INPUT DC 9 12 300mA min 2 Output AC230V 50Hz AC 120V 60Hz 300Ma DC 9V 300Ma 3 Dimensions 482x132x73mm 4 Weight 2 5Kg Operating Instructions 1 General Descriptions 1 1 There is a 192 DMX channel adjusting output level in every scene 1 2 8 scenes are available to be programmed for each bank When scene running all scenes of one bank will be executed continuously in a cycle 1 3 Select desired bank using UP and DOWN button Also you can select desired bank using MIDI signals through MIDI interface there are totally 30 banks once only one can be chose 1 4 Scenes can be executed automatically and the duration is dependent on TAP SYNC scenes are executed under music triggering or NOTE triggering also press a scene buttons by hand to run scenes 1 5 There are total 6 chases each contains 240 scenes 2 Controls amp Functions 2 1 Scanners 1 12 Scanners Channel Fade Control LED 1 1 16 OFF OFF 2 17
6. Y Programming for Chases Press PROGRAM Corresponding LED flashes which indicates it is in PROGRAM mode 1 Make Program of Scene in Chase 1 1 There are up to 240 scenes in a CHASE 1 2 Scenes are run in the programmed order First programming first running 1 3 Select a CHASE who contains programmed scene 1 4 Select scene of bank 1 5 Press MIDI ADD Copy a Bank to Chase Select a bank press MUSIC BANK COPY and press MIDI ADD then the scenes of the bank are copied to the chase Chase Editing Add a STEP IN CHASE 3 1 Select desired LCD display 3 2 Press TAP SYNC DISPLAY the LCD shows CHASE and its STEP press TAP SYNC DISPLAY once the LCD shows the SCENE and BANK 3 3 Add a STEP in CHASE 3 4 Press TAP SYNC DISPLAY the LCD shows the CHASE and its STEP if it has made program till the 15 step Select the 9 using UP or DOWN press MIDI ADD the CHASE is maintained and the STEP turns to 10 STEP Select desired SCENE using UP or DOWN press MIDI REC then the new 10 STEP is added to SCENE the previous 10 STEP turns to the new 11 STEP the previous 11 STEP turns to the new 12 STEP and so on 3 4 Delete a STEP in CHASE Select desired STEP and then press AUTO DEL For example select the 10 STEP using UP or DOWN press AUTO DEL then the 10 STEP is deleted the previous 11 STEP turns to the 10 STEP the previous 12 STEP and so on Delete a Chase 4 1 Select desired CHASE 4 2 Press desired CHASE while holding AUTO DEL C
7. king programs when running CHASE scene will be step auto matching 5 2 CHASE RUN includes MANUAL RUN AUTO RUN AUDIO RUNS and MIDI RUN 5 3 Either one CHASE more can be run in the order of selection 5 4 Press CHASE corresponding indicator lights which indicates it is in CHASE RUN 6 Fade Time Control Move the slider to adjust FADE TIME output varies accordingly MIDI Channel Setting 1 MIDI Channel Setting 1 1 Press MIDI the third and fourth digits of LED blink selects MIDI channel setting 1 2 Press MIDI one or more to end MIDI channel setting Also you can press any other key except UP or DOWN or move the fades to end MIDI channel setting 2 MIDI Running NOTE ON Receive NOTE ON signals to execute corresponding function BANK NOTE NUMBER FUNCTION BANK2 00 TURN ON TURN OFF SCENE 1 01 TURN ON TURN OFF SCENE 2 02 TURN ON TURN OFF SCENE 3 03 TURN ON TURN OFF SCENE 4 04 TURN ON TURN OFF SCENE 5 05 TURN ON TURN OFF SCENE 6 06 TURN ON TURN OFF SCENE 7 07 TURN ON TURN OFF SCENE 8 BANK2 08 TURN ON TURN OFF SCENE 1 09 TURN ON TURN OFF SCENE 2 10 TURN ON TURN OFF SCENE 3 BANK15 112 TURN ON TURN OFF SCENE 1 113 TURN ON TURN OFF SCENE 2 114 TURN ON TURN OFF SCENE 3 115 TURN ON TURN OFF SCENE 4 116 TURN ON TURN OFF SCENE 5 117 TURN ON TURN OFF SCENE 6 118 TURN ON TURN OFF SCENE 7
8. lean all Chase ALL Scenes are still available 5 1 Press DOWN AUTO DEL while turning power off 5 2 Turn the power on Running Scenes Turn the power on it is in MANUAL RUN mode when in PROGRAM mode press PROGRAM for 2 seconds PROGRAMMED LED goes out it enters MANUAL mode If there are not any scenes having been programmed in a bank the scene can t be run only the SCENES having been programmed are executed If the fades is set to OFF Scene will execute channel program setting 1 Manual Run 1 1 Extinguish AUTO triggered LED and MUSIC triggered LED 1 2 Select a bank using 4 of t MIDI signals through MIDI interface 1 3 Press scene to run scene 1 4 Run scene using MIDI 2 Auto Run 2 1 Press AUTO DEL corresponding LED is ON 2 2 Press TAP SYNC DISPLAY press it once more some time the interval between two pressing is assigned to the speed of AUTO RUN the maximum limit is 10 minutes if there are many pressings more then twice the last two pressing are designated 2 3 Select desired bank using UP or DOWN via MIDI signals 2 4 Press AUTO DEL once more to withdraw AUTO RUN mode 3 Music Run 3 1 Press MUSIC BANK COPY corresponding indicator lights SCENE RUN is engaged into MUSIC RUN 3 2 Select desired bank using UP or DOWN or via MIDI signals 3 3 Press MUSIC BANK COPY once more to withdraw MUSIC RUN 4 MIDI Run Select bank to run scenes using MIDI whenever it is in MANUAL RUN AUTO RUN or MUSIC RUN 5 Chase Run 5 1 CHASE RUN requires ma
Download Pdf Manuals
Related Search