Crystal Ball
Contents
1. Please read this user manual carefully and thoroughly before operation 1 1 What is Included C rysta Ba a 1Xcrystal ball with lead b 1X usermanual Carefully unpack the carton check the contents to ensure that all parts are present and in good condition Contact your supplier if any part is missing ordamaged 1 2 Safety Instructions WARNING To reduce nsk of fire electnc shock or injury follow these important safety instructions This product is intended for indoor use only Always tum off unplug power and allow fixture to cool before servicing Ensure that fixture is properly grounded Please keep this User Guide for future reference Always make sure that you are connecting to the proper voltage and thatthe line voltage you are connecting to isnothigherthan that TRIANGLE stated on decal orrear panel of the fixture ie a To prevent risk of fire or shock do not expose fixture to rain or Copyrnght triAngle lights moisture Last updated on Mach 28th 2012 Make sure powercord isnevercnmped ordamaged tnangle lights gmail com Do not look into the beam from a distance of less than 40 cm 16 Inches 1 8 Copyright 2011 tnAngle lights 1 3 Product Features 2u Super bright 6X3W RG BW leds 2 1 Mounting 4 modes Sound Auto DMX Master Slave With adjustable mounting double brackets this unit may be wall DMX 6CH mounted free standing orclamp mounted IMPORTANT Safety cables must alwa2. ight Weight POWER AC Power Power Consumption Fuse LIGHT SOURCE Red Green Blue IMPORIANT INFORMATION 17cm 17cm 15cm 1 3kg AC110 240V 50 60Hz 25w MAX 6x3W rgb leds 6 6 6 old appliances contain and reduce the impacton human health In orderto optimize the recovery and recycling of the matenals that 8 and the environment ensure that this product is recycled atthe end of its life 7 8 Copynght 2011 tnAngle lights
3. lockwise rotation slow to fast 192 255 Counter clockwise rotation slow to fast CH6 0 255 Auto run and sound mode settings 3 4 Master Save Mode In this mode multiple units can be linked together as one system and run in sync Maximum 31pcscan be linked in a daisy chain as Master Slave system 1 Use DMX cable to link your Amor pars together from DMX OUTto DMX IN connector 2 One of the fixtures isto be setas Masterand this Master unit needs to work under Auto Static Color mode Othersare to be set Save mode A001 3 Operate the Master fixture to run the whole system 5 8 Copyright 2011 trAngle lights 4 SERVIC ING 4 1 Fuse Replacement 1 Unscrew the fuse holderand remove the damaged fuse 2 Replace with exact same type fuse and screw the fuse holder back in its place 4 2 Cleaning To maintain optimum performance fixtures should be cleaned frequently Unplug fixture from powerand allow the fixture to cool down Use a vacuum oraircompressorand a soft brush to remove dust collected on the plastic coverorlens 4 3 Trouble Shooting 1 Unit doesnot respond to DMX Check that the DMX cablesare connected propery and are wired correctly pin 3 is hot on some other DMX devices pin 2 may be hot It does matter which way the inputs and outputs are connected Disconnect from mains before servicing 6 8 Copyright 2011 trAngle lights _5 TECHNICAL SPECIRCATIONS WEIG HT amp DIMENSIO NS Length Depth He
4. ys be used The safety cable must be capable of holding 10 times the weight of the fixture 2 2 Fixture Linking To run your light shows of one or more fixtures using a DMX 512 controller orto run synchronized shows on two or more fixtures in master slave operating mode you need DMX cablesto link the units from DMX IN to DMX OUT 2 3 AC Power The fixture is designed to work on 1OOV 240V 50 60Hz 2 8 Copyright 2011 tnAngle lights 3 8 Copyright 2011 tnAngle lights 3 OPERATION INSTRUCTIONS 3 1 Menu Map Display Function Dmx Address A001 A512 A001 A511 Slave Mode please set addressto A001 Al Red Color A2 Green Color A3 Blue Color A4 RGB Step mode A5 RGB CMYW 7 color mode A6 Color Slow change mode A7 Strobe mode S1 Sound mode S2 Sound and color step mode 3 2 Auto Mode In this mode you can set the unit to run in static colors trobe ordo colorchanging without a dmx controller 1 Press MENU button until display reads Al to A7 2 Press Enter to run in different auto run modes 3 3 Dmx Mode In DMX mode you can control the fixture with a DMX controller 1 Press MENU button until display reads A001 A511 2 Then press Enter button to reach A xxx and use Use Up Down button to set DMX address forthe fixture 4 8 Copyright 2011 tnAngle lights Dmx Table Chl 0 255 Strobe from slow to fast CH2 0 255 Red dimmer Ch3 0 255 Green dimmer Ch4 0 255 Blue dimmer 0 127 Pan position Ch5 128 191 C
Download Pdf Manuals
Related Search