Television - B&R Vacances Locations Lac Majeur
Contents
1. Configuring the Input Menu 0 Source List Use to select TV or other external input sources such as DVD Blu ray players Satellite receivers Set Top Box connected to the TV Use to select the input source of your choice TV Ext AV Component PC HDMI1 DVI HDMI2 Edit Name You can choose only those external devices that are connected to the TV In the Source List connected inputs will be highlighted and sorted to the top Inputs that are not connected will be sorted to the bottom Ext and PC always stay activated TOOLS Tools Displays the Edit Name and Information menus Press the SOURCE button on the remote control to view an external signal source TV mode can be selected by pressing the TV button DESS Q Edit Name Name the device connected to the input jacks to make your input source selection easier VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI TV IPTV Blu ray HD DVD DMA When connecting an HDMI DVI cable to the HDMI IN 1 DVI port you should set the HDMI1 DVI mode to DVI or DVI PC in the Edit Name of the Input mode In this case a separate sound connection is required J Configuring the Support Menu 0 Self Diagnosis Picture Test If you think you have a picture problem perform the picture test Check the colour pattern on the screen to see if the problem still exists Software Upgrade e Yes If the test pattern does not appea2. VOD Video on Demand and so on are not included in this specification So they cannot be workable at this moment 3 Although this TV set meets the latest DVB T and DVB C standards as of August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed 4 Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business 5 Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with some cable service providers 6 For more information please contact your local Samsung customer care centre Q Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen e Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image o Watching the LCD TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the abo
3. You can change the country for analogue channels Manual Store Now 8 Next Guide Full Guide You can change the country for digital channels Default Guide Now Next Channel List Digital Channel Auto Store You can scan for the frequency ranges available to you and availability depends on your country Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Child Lock function the PIN input window appears Digital amp Analogue Digital and Analogue channels Digital Digital channels Analogue Analogue channels Q Manual Store Scans for a channel manually and stores it in the TV s memory If a channel is locked using the Child Lock function the PIN input window appears Digital Channel Manual store for digital channels Digital Channel is only available in DTV mode e Channel Set the Channel number using the A V or number 0 9 buttons e Frequency Set the frequency using the number buttons e Bandwidth Set the bandwidth using the A V or number 0 9 buttons When it has finished channels are updated in the channel list English 9 Analogue Channel Manual store for analogue channel e Programme Programme number to be assigned to a channel Sets the programme number using the A V or number 0 9 buttons Colour System Auto PAL SECAM NTSC4 43 Sets the colour system value using the A or V button Sound System B
4. 11 www samsung com tr ESTONIA 800 7267 www samsung com ee LATVIA 8000 7267 www samsung conv lv LITHUANIA 8 800 77777 www samsung comi lt MOLDOVA 00 800 500 55 500 KAZAHSTAN 8 10 800 500 55 500 www samsung com kz ru KYRGYZSTAN 00 800 500 55 500 RUSSIA 8 800 555 55 55 www samsung ru TADJIKISTAN 8 10 800 500 55 500 UKRAINE 8 800 502 0000 a ki UZBEKISTAN 8 10 800 500 55 500 www samsung com kz ru imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model 737 Serial No BN68 02358A 02 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Q Digital TV Notice 1 Functionalities related to Digital TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T or DVB C signal 2 DVB T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast transmission of digital TV over cable However some differentiated features like EPG Electric Programme Guide
5. R AUDIO L jacks KENSINGTON LOCK depending on the model The Kensington Lock optional is a device used to physically fix the system when used in a public place If you want to use a locking device contact the dealer where you purchased the TV The location of the Kensington Lock may be different depending on its model English 5 You can use the remote control up to a distance of about 23 feet from the TV The performance of the remote control may be affected by bright light The product colour and shape may vary depending on the model POWER Television Standby button NUMERIC BUTTONS Press to change the channel FAV CH Used to display Favourites Channel Lists on the screen a Press to increase or decrease the volume SOURCE Press to display and select the available video sources INFO Press to display information on the TV screen TOOLS Use to quickly select frequently used functions CHLIST Displays the Channel List on screen COLOURS BUTTONS Use these buttons in the Channel list menus etc TV Selects the TV mode directly PRE CH Enables you to return to the previous channel you were watching MUTE Press to temporarily cut off the sound D P AIP Vv Press to change channels MENU Displays the main on screen menu GUIDE Electronic Programme Guide EPG display RETURN Returns to the previous menu UPA DOWNY LEFT4 RIGHT gt ENT
6. action movies e Low signal level or bad quality can cause picture distortion This is not a TV issue Wrong or missing colour with Component connection e Make sure the Component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or the screen will be blank Poor colour or brightness e Adjust Picture options in the TV menu Picture mode Colour Brightness Sharpness e Adjust Energy Saving option in Setup menu e Try picture reset to view the default picture setting Go to MENU Picture Picture Reset Dotted line on the edge of screen e f picture size is set to Screen Fit change to 16 9 e Change cable set top box resolution Picture is black and white with AV Composite input only e Connect video cable Yellow to Green jack of component input 1 of the TV Picture freezes or is distorted when changing channels or picture is delayed e f connected with cable box please try to reset cable box reconnect AC cord and wait until cable box reboots It may take up to 20 minutes e Set output resolution of cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating e Goto MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may caused by the source or signal No sound or sound is too low at maximum volume e Please check t
7. completed Alternative Software To display the software version information Q HD Connection Guide This menu presents the connection method that provides the optimal quality for the HD TV Refer to this information when connecting external devices to the TV Q Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can view the information regarding the call centre product and software file download method English 23 RECOMMENDATIONS FOR USE Fl Teletext Feature Most television stations provide written information services via Teletext The index page of the Teletext service gives you information on how to use the service In addition you can select various options to suit your requirements by using the remote control buttons For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control O E mode O S Teletext on mix Press to select the Teletext mode LIST FLOF If you press it in the LIST mode it switches into the List save mode In the List save mode you can save Teletext page into list Press to activate Teletext mode after selecting the channel providing the Teletext service Press it twice to overlap the Teletext with the current broadcasting screen using th
8. displayed HDMI Black Level Normal Low You can directly select the black level on the screen to adjust the screen depth This function is active only when the external input connects to HDMI RGB signals Film Mode Off Auto The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality Z Film Mode is supported in TV AV COMPONENT 480i 1080i and HDMI 480i 1080 amo o o Q Picture Reset Reset Picture Mode Cancel Resets all picture settings to the default values Select a picture mode to be reset The reset is performed for each picture mode e Reset Picture Mode Current picture values return to default settings Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP The Windows display settings for a typical computer are shown below The actual screens on your PC will probably be different depending upon your particular version of Windows and your particular video card However even if your actual screens look different the same basic set up information will apply in almost all cases If not contact your computer manufacturer or Samsung Dealer 1 First click on Control Panel on the Windows start menu 2 When the control panel window appears click on Appearance and Themes and a display dialog box will appear 3 When the control panel window appears click on Display and a dis
9. from TV and reassemble Can not assemble stand base Make sure TV is placed on flat surface If can not remove screws from TV please use magnetized screw driver Channel menu is grey out unavailable Channel menu is only available when TV source is selected Your settings are lost after 30 minutes or every time TV is turned off If TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Please change from Store Demo mode to Home Use mode in the Plug amp Play procedure Press the SOURCE button to select TV mode go to MENU Setup Plug amp Play ENTER 4 Intermittent loss of audio or video Check cable connections and reconnect Can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If wall mounting we recommend using cables with 90 degree connectors You may see small particles if you look closely at the edge of the bezel surrounding the TV screen This is part of the product s design and is not a defect Scramble signal or Weak Signal No Signal with CAM CARD Cl Check that CAM has Cl Card installed into the common interface slot Pull out CAM from the TV and insert into the slot again When turned off and 45 minutes later TV is turned on itself It is normal the TV operate OTA Over The Air function itself to upgrade firmware downloaded during watching Recurrent
10. from the menu English 7 P gt Mode Standard Backlight Bi Contrast 95 Brightness 45 Sharpness 50 Color 50 Mode i Standard B Backlight BT Contrast 295 Brightness 145 Sharpness 50 Color Backlight Contrast ig Sharpness 150 Color 50 Advanced Settings Picture Options Picture Reset SS es Move 4 gt Adjust CC Enter 5 Return x Move 4p Adjust Enter Return J Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption The standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER Q button on the remote control The screen is turned off and a standby indicator appears on your set 2 To switch your set back on simply press the POWER 5 button again Do not leave your set in standby mode for long periods of time when you are away on holiday for example It is best to unplug the set from the mains and aerial W Plug 8 Play Feature When the TV is initially powered on basic settings proceed automatically and subsequently 1 Press the POWER button on the remote control control The message You can set the menu language is displayed 2 Select the appropriate language by pressing the A or V button Press the ENTERC button to confirm your choice 3 Press the lt or B button to select Store Demo or Home Use then the ENTER C button We recommend setting
11. front and back of the stand when attaching it 4 To make sure the TV is installed on the stand at a proper level do not apply excess downward pressure to the upper left of right sides of the TV 2 Fasten two screws at position and then fasten two screws at position Stand the product up and fasten the screws If you fasten the screws with the LCD TV placed down it may lean to one side J Installing the Wall Mount Kit Wall mount items sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the Wall Mount items Contact a technician for assistance when installing the wall mounted bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own AN Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock J Using the Anti Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately The location of the Kensington Lock may be different depending on its model 1 Insert the locking de
12. is not available in Component and HDMI mode Q Speaker Select External Speaker TV Speaker If you want to hear the sound through separate speakers cancel the internal amplifier The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker If you select External Speaker in the Speaker Select menu the sound settings will be limited 0 Sound Reset Reset All Reset Sound Mode Cancel You can restore the Sound settings to the factory defaults Reset Sound Mode Current sound values return to default settings J Selecting the Sound Mode You can set the sound mode in the Tools menu When you set to Dual I Il the current sound mode is displayed on the screen Audio Type Dual 1 2 Default Mono MONO i Automatic change A2 Stereo Stereo STEREO MONO Dual DUAL 1 DUAL 2 DUAL 1 Mono MONO Automatic change NICAM Stereo MONO STEREO 9 Stereo MONO e DUAL 1 Dual DUAL 2 DUAL 1 If the stereo signal is weak and an automatic switching occurs then switch to the mono This function is only activated in stereo sound signal It is deactivated in mono sound signal This function is only available in TV mode English 18 SETUP W Configuring the Setup Menu Q Menu Language You can set the menu language Plug 8 Play 2 c Time Q Time Broadcast Clock Security Setting the clock is necessary in order to use the various timer features of the TV paa The current time
13. menu You can also set the size by selecting Tools Picture Size e Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio e 16 9 Adjusts the picture size to 16 9 appropriate for DVDs or wide broadcasting e Wide Zoom Magnify the size of the picture more than 4 3 e Zoom Magnifies the 16 9 wide picture in the vertical direction to fit the screen size e 4 3 This is the default setting for a video movie or normal broadcasting e Screen Fit Use the function to see the full image without any cut off when HDMI 720p 1080i or Component 1080i signals are input 7 Depending on the input source the picture size options may vary The items available may differ depending on the selected mode J In PC Mode only 16 9 and 4 3 mode can be adjusted Settings can be adjusted and stored for each external device you have connected to an input of the TV Temporary image retention may occur when viewing a static image on the set for more than two hours 2 Wide Zoom Press the B button to Select Position then press the ENTER C4 button Press the A or V button to move the picture up down Then press the ENTER C button Zoom Press the B button to Select Position then press the ENTER C button Press the A or V button to move the picture up and down Then press the ENTER button Press the B button to Select Size then press the ENTER button Press the A or V button to magnify or reduce the picture
14. of the picture Tint G R Adjusts the colour tint of the picture Select a picture mode to be adjusted first The adjusted values are saved for each picture mode When you make changes to Backlight Contrast Brightness Sharpness Colour or Tint G R the OSD will be adjusted accordingly In analogue TV Ext AV modes of the PAL system you cannot use the Tint G R Function In PC mode you can only make changes to Backlight Contrast and Brightness Settings can be adjusted and stored for each external device you have connected to an input of the TV The energy consumed during use can be significantly reduced if the brightness level of the picture is reduced which will reduce the overall running cost YAY 0o o o o o 06888 0 Advanced Settings Samsung s new TVs allow you to make even more precise picture settings than previous Colour 50 models See below to adjust detailed picture settings Advanced Settings is available in Standard or Movie mode Advanced Settings Pa In PC mode you can only make changes to Gamma and White Balance from among the C Picture Options Advanced Settings items Picture Reset Black Tone Off Dark Darker Darkest You can select the black level on the screen to adjust the screen depth English 13 Dynamic Contrast Off Low Medium High You can adjust the screen contrast so that the optimal contrast is provided Gamma You can adjust the Primary Colour Red Green Blue Intensity
15. picture sound issue Check and change signal source This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be few bright or dark pixels on the screen These pixels will have no impact on the performance of the product English 29 ii Specifications Model Name LE26B350 LE32B350 Screen Size Diagonal 26 inch 32 inch PC Resolution Optimum 1360 x 768 60Hz 1360 x 768 60Hz Sound Output 5W X2 5W X2 Dimensions WxDxH Body 665 x 75 x 453 mm 799 x 76 x 530 mm With stand 665 x 215 x 496 mm 799 x 218 x 573 mm Weight With Stand 7 kg 10 kg Environmental Considerations Operating Temperature 10 C to 40 C 50 F to 104 F 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing 5 to 95 non condensing Stand Swivel Left Right 0 0 Design and specifications are This device is a Class B digita subject to change without prior notice apparatus For the power supply and Power Consumption refer to the label attached to the product English 30
16. size in the vertical direction Then press the ENTER C button After selecting Screen Fit in HDMI 1080i or Component 1080i mode Select Position by pressing the 4 or button Use the A V lt or B button to move the picture Reset Press the 4 or B button to select Reset then press the ENTER C button You can initialize the setting If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the Overscan function English 14 Screen Mode 16 9 Wide Zoom Zoom 4 3 When setting the picture size to Auto Wide in a 16 9 wide TV you can determine the picture size you want to see the 4 3 WSS Wide Screen Service image or nothing Each individual European country requires different picture size so this function is intended for users to select it 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnify the size of the picture more than 4 3 Zoom Magnify the size of the picture vertically on screen 4 3 Sets the picture to 4 3 normal mode This function is available in Auto Wide mode This function is not available in PC Component or HDMI mode Digital NR Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen 7 When the signal is weak select one of the other options until the best picture is
17. source list even though a PC is not connected Video is OK but there is no audio with HDMI connection Check the audio output setting on your PC English 28 Issue Solution Others Picture is not shown in full screen Black bars on each side will be shown on HD channels when displaying upscaled SD 4 3 contents Black bars on Top amp Bottom will be shown on movies that have aspect ratios different from your TV Adjust picture size option on your external device or TV to full screen Remote control does not work Replace the remote control batteries with correct polarity Clean the transmission window located on the top of the remote Try pointing the remote directly at the TV from 5 6 feet away Can not control TV power or volume with Cable Set top box remote control Programme the Cable Set top box remote control to operate the TV Refer to Cable Sat user manual for SAMSUNG TV code Not Supported Mode message Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual Plastic smell from TV This smell is normal and will dissipate over time TV Signal Information is unavailable in the Self Diagnostic Test menu This function is only available with digital channels with an Antenna RF Coax connection TV is tilted to right or left side Remove the stand base
18. the TV to Home Use mode for the best picture in your home environment Store Demo mode is only intended for use in retail environments If the unit is accidentally set to Store Demo mode and you want to return to Home Use Standard Press the Volume button on the TV When the volume OSD is displayed press and hold the MENU button on the TV for 5 seconds 4 Press the ENTER button Select the appropriate country by pressing the A or V button Press the ENTER C4 button to confirm your choice 5 Press the A or V button to select the channel source to memorize Press the ENTER 4 button to select Start Digital amp Analogue Digital and Analogue channels Digital Digital channels Analogue Analogue channels The channel search will start and end automatically Press the ENTER 4 button at any time to interrupt the memorization process After all the available channels are stored the message Set the Clock Mode is displayed 6 Press the ENTER C button Press the A or V button to select Auto then Press the ENTER C button If you select Manual Set current date and time is displayed If you have received a digital signal the time will be set automatically If not select Manual to set the clock refer to page 19 The connection method to provide the best quality HD is offered After confirming the method press the ENTER C button 8 The message Enjoy your TV is displayed When you have finished press the ENTER 4 b
19. will appear every time you press the INFO button If you disconnect the power cord you have to set the clock again e Clock Mode You can set up the current time manually or automatically Auto Set the current time automatically using the time from the digital broadcast Manual Set the current time to a manually specified time Depending on the broadcast station and signal the auto time may not be set correctly If this occurs set the time manually The Antenna or cable must be connected in order to set the time automatically e Clock Set You can set the current time manually Set up this item when you have set Clock Mode to Manual You can set the day month year hour and minute directly by pressing the number buttons on the remote control Sleep Timer Off 30 min 60 min 90 min 120 min 150 min 180 min The sleep timer automatically shuts off the TV after a preset time 30 60 90 120 150 and 180 minutes The TV automatically switches to standby mode when the timer reaches 0 To cancel the Sleep Timer function select Off A Press the TOOLS button to display the Tools menu You can also set the sleep timer by selecting Tools Sleep Timer Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time Set the hour minute and activate inactivate To activate the timer with the setting you ve chosen set to Activate Off Time Set the hour minut
20. Audio Language and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted If you change this language setting the new selection is only valid for the current channel The changed setting does not change the setting of the Primary Subtitle Language Primary Audio Language or the Primary Teletext Language of the Preference menu Common Interface e CI Menu This enables the user to select from the CAM provided menu Select the CI Menu based on the menu PC Card e Application Info This contains information on CAM inserted in the CI slot and displays it The Application Info inserting is about the CI CARD You can install the CAM anytime whether the TV is ON or OFF 1 Purchase the CI CAM module by visiting your nearest dealer or by phone 2 Insert the CI CARD into the CAM in the direction of the arrow until it fits 3 Insert the CAM with the CI CARD installed into the common interface slot Insert the CAM in the direction of the arrow right up to the end so that it is parallel with the slot 4 Check if you can see a picture on a scrambled signal channel CAM is not supported in some countries and regions check with your authorized dealer O Security Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the m
21. Colour Space Colour Space is a colour matrix composed of red green and blue colours Select your favourite Colour Space to experience the most natural colour e Native Native Colour Space offers deep and rich colour tone e Auto Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources White Balance You can adjust the colour temperature for more natural picture colours e R Offset G Offset B Offset R Gain G Gain B Gain You can adjust the Colour temperature in the light areas by changing the values of R G B Recommended for advanced users only e Reset The previously adjusted white balance will be reset to the factory defaults Flesh Tone You can emphasize the pink flesh tone in the picture Changing the adjustment value will refresh the adjusted screen Edge Enhancement Off On You can emphasize object boundaries in the picture Picture Options In PC mode you can only make changes to the Colour Tone and Size from among the items in Picture Options Colour Tone Cool Normal Warm1 Warm2 You can select the most comfortable colour tone to your eyes Settings can be adjusted and stored for each external device you have connected to an input of the TV Warm1 or Warm2 is only activated when the picture mode is Movie Size You can select the picture size which best corresponds to your viewing requirements A Press the TOOLS button to display the Tools
22. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre Tr Web Site AUSTRIA 0810 SAMSUNG 7267864 0 07 min www samsung com at BELGIUM a Bag 800 SAMSUNG 800 726786 www samsung com cz CZECH REPUBLIC Distributor pro eskou republiku Samsung Zrt esk organiza n slo ka Oasis Florenc Sokolovska394 17 180 00 Praha 8 DENMARK 8 SAMSUNG 7267864 www samsung com dk EIRE 0818 717 100 www samsung com ie FINLAND 30 6227 515 www samsung com fi FRANCE 01 4863 0000 www samsung com fr GERMANY 01805 SAMSUNG 7267864 0 14 Min www samsung de HUNGARY 06 80 SAMSUNG 7267864 www samsung com hu ITALIA 800 SAMSUNG 7267864 www samsung com it LUXEMBURG 02 261 03 710 www samsung com lu NETHERLANDS 0900 SAMSUNG 0900 7267864 0 10 Min www samsung com nl NORWAY 3 SAMSUNG 7267864 www samsung com no POLAND Na Waaa PN ASTA www samsung com pl PORTUGAL 808 20 SAMSUNG 7267864 www samsung com pt SLOVAKIA 0800 SAMSUNG 7267864 www samsung com sk SPAIN 902 1 SAMSUNG 902 172 678 www samsung com es SWEDEN 0771 726 7864 SAMSUNG www samsung com se SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 min www samsung com ch U K 0845 SAMSUNG 7267864 www samsung com uk BELARUS 810 800 500 55 500 TURKEY 44477
23. ER C Use to select on screen menu items and change menu values EXIT Press to exit the menu SUBT Digital subtitle display AD Audio Description selection Teletext Functions E Teletext mode selection LIST FLOF E Teletext reveal E Teletext size selection E9 Teletext store Fastext topic selection Alternately select Teletext Double or Mix O Exit from the teletext display 9 Teletext sub page 57 Teletext next page 3 Teletext previous page Gi Teletext index Teletext hold x Teletext cancel 686 989 8599990 O Installing Batteries in the Remote Control il Remote Control tS A source P MUTE SAMSUNG Lift the cover at the back of the remote control upward as shown in the figure 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Replace the cover Remove the batteries and store them in a cool dry place if you won t be using the remote control for a long time If the remote control doesn t work check the following Is the TV power on Are the plus and minus ends of the batteries reversed Are the batteries drained Is there a power outage or is the power cord unplugged Is there a special fluorescent light or neon sign nearby English 6 OPERATION J Viewing the menu
24. G DK I L Sets the sound system value using the A or V button Channel When you know the number of the channel to be stored Press the A or V button to select C Air channel or S Cable channel Press the B button then press the A V or number 0 9 buttons to select the required number You can also select the channel number directly by pressing the number 0 9 buttons If there is abnormal sound or no sound reselect the sound standard required e Search When you do not know the channel numbers Press the A or V button to start the search The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen e Store When you store the channel and associated programme number Set to OK by pressing the ENTER C button Channel mode P Programme mode When completing tuning the broadcasting stations in your area have been assigned to position numbers from P00 to P99 You can select a channel by entering the position number in this mode C Air channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode S Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode Now 8 Next Guide Full Guide The EPG Electronic Programme Guide information is provided by the broadcasters Programme entries may appear blank or out of date as a result of the information broad
25. If you have any doubt about the security of your connections contact a professional installer English 26 J Troubleshooting If you have any questions of TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com site then click on Support or contact Call Centre on list of last page Issue Solution Picture Quality First of all please perform the Picture Test to confirm that your TV is properly displaying test image e Goto MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may caused by the source or signal TV image does not look as good as it did in the store e Ifyou have an analogue Cable Set top box upgrade to an Box Use HDMI or Component cables to deliver HD picture quality e Cable Satellite subscriber Try HD High Definition stations from channel line up e Antenna connection Try HD stations after performing Auto programme Many HD channels are upscaled from SD Standard Definition contents e Adjust Cable Set top box video output resolution to 1080i or 720p e Confirm that you are watching the TV at the minimum distance recomended based on the size and definition of the signal you are displaying Picture is distorted macroblock small block dots pixelization e Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and
26. Inc TruSurround HD technology is incorporated under license from SRS Labs Inc DIGITAL CXIDOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of DIGITAL PLUS Dolby Laboratories Q Symbol A A Note One Touch Button TOOLS Button Press English 1 GENERAL INFORMATION J Viewing the Control Panel SOURCE C SAMSUNG O aQ OI OHHH i The product colour and shape may vary depending on the model The front panel buttons can be activated by touching them with your finger SOURCE 4 Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER 4 button on the remote control MENU Press to see an on screen menu of your TV s features d Press to increase or decrease the volume In the on screen menu use the sag buttons as you would use the 4 and B buttons on the remote control V CH A Press to change channels In the on screen menu use the V CH A buttons as you would use the V and A buttons on the remote control POWER INDICATOR Blinks and turns off when the power is on and lights up in stand by mode POWER Press to turn the TV on and off REMOTE CONTROL
27. SENSOR Aim the remote control towards this spot on the TV SPEAKERS English 2 Accessories Power Cord Cover Bottom Remote Control 4 Batteries AAA x 2 Va o M4 X L16 Stand Screw X 6 Cleaning Cloth Owner s Instructions e Warranty card e Safety Guide Please make sure the following items are included with your LCD TV If any items are missing contact your dealer Warranty card Safety Guide Not available in all locations The items colour and shape may vary depending on the model English 3 Viewing the Connection Panel TV Rear Panel TV Side Panel DIGITAL AUDIO OUT OPTICAL 30V3YILNI NOWWOD N ANTIN Power Input AUDI0 D COMPONENT IN AV IN The product colour and shape may vary depending on the model Whenever you connect an external device to your TV make sure that power on the unit is turned off When connecting an external device match the colour of the connection terminal to the cable ANT IN Connects to an antenna or cable TV system HDMI IN 1 DVI 2 Supports connections between HDMI connection enabled AV devices Set Top Boxes DVD Blu ray player No additional Audio connection is needed for an HDMI to HDMI connection The HDMI IN 1 DVI jack can be used to connect a PC What is HDMI High Definition Multimedia interface allows the transmission of high definition digital video data and
28. TV Gold All deleted channels will be shown on All Channels menu Ma UKTV style Agray coloured channel indicates the channel has been deleted Ci The Add menu only appears for deleted channels a E ete You can also delete a channel from the Added Channels or Favourites menu in the m4 c pe same manner me a v Add to Favourite Delete from Favourite mj You can set channels you watch frequently as favourites AI wChannelType mZoom mSelect Tools A Press the TOOLS button to display the Tools menu You can also set the add to or delete from Favourite by selecting Tools Add to Favourite or Delete from Favourite The symbol will be displayed and the channel will be set as a favourite All favourite channels will be shown on Favourites menu Timer Viewing If you reserve a programme you want to watch the channel is automatically switched to the reserved channel in the Channel List even when you are watching another channel To reserve a programme set the current time first See page 19 Only memorized channels can be reserved You can set the channel day month year hour and minute directly by pressing the number buttons on the remote control Reserving a programme will be shown in the Programmed menu Digital Programme Guide and Viewing Reservation When a digital channel is selected and you press the B button the Programme Guide for the channel appears You can reserve a programme according to the pr
29. ame way To display the previous or next page press the corresponding coloured button SUBT The Teletext pages are organized according to six categories Part Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information nMmMODOWS English 24 Teletext information is often divided between several pages displayed in sequence which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system Teletext level supported by the TV is version 2 5 which is capable of displaying additional graphics or text Depending upon the transmission blank side panels can occur when displaying Teletext In these cases additional graphics or text is not transmitted Older TV s which do not support version 2 5 are not capable of displaying any additional graphics or text regardless of the Teletext transmission Press the TV button to exit from the Teletext display POWER EF Teletext 16 9 picture is 16 9 SD Installing the Stand 1112113 Preset Place the stand onto the Guide Stand and fasten it using the screws Applicable to 32inch models only 1 Attach your LCD TV to the stand Two or more people should carry the TV Make sure to distinguish between the
30. ation Press the TOOLS button to use the option menu Change Info Select to change a viewing reservation Cancel Schedules Select to cancel a viewing reservation 1 1 2009 1359 5 TV1 Ghangelnfo Cancel Schedules 18 59 2 TV3 information mey 2 ma oh pawwelbolg Information Select to view a viewing reservation You can also change the reservation information Select All Select all reserved programmes All aZoom Select 4 Tools Information PICTURE CONTROL J Configuring the Picture Menu Q Mode You can select the type of picture which best corresponds to your viewing requirements A Press the TOOLS button to display the Tools menu You can also set the picture mode by Mode Standard gt selecting Tools Picture Mode Q Backlight BY p Contrast 95 Dynamic Brightness 145 Selects the picture for high definition in a bright room Sharpness 50 Stan dard E Colour BE Selects the picture for the optimum display in a normal environment Movie Selects the picture for viewing movies in a dark room Q Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options that allow you to control the picture quality Backlight Adjusts the brightness of LCD back light Contrast Adjusts the contrast level of the picture Brightness Adjusts the brightness level of the picture Sharpness Adjusts the edge definition of the picture Colour Adjusts colour saturation
31. cast on a given channel The display will dynamically update as soon as new information becomes available For detailed procedures on using Now amp Next Guide and Full Guide refer to the descriptions on page 11 You can also display the guide menu simply by pressing the GUIDE button To configure the Default Guide refer to the descriptions Now amp Next Guide For the six channels indicated in the left hand column displays the Current programme and the Next programme information Full Guide Displays the programme information as time ordered One hour segments Two hours of programme information is displayed which may be scrolled forwards or backwards in time Default Guide Now amp Next Guide Full Guide You can decide whether to display either the Now 4 Next Guide or the Full Guide when the GUIDE button on the remote control is pressed Channel List For detailed procedures on using the Channel List refer to the Managing Channels instructions You can select these options by simply pressing the CH LIST button on the remote control Channel Mode When press the P W A button Channels will be switched within the selected channel list Added Ch Channels will be switched within the memorized channel list Favourite Ch Channels will be switched within the favourite channel list Fine Tune If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and sto
32. ck icon gone View programme information Select a programme of your choice by pressing the A V 4 gt button Then press the INFO button when the programme of your choice is highlighted The programme title is on the upper part of the screen centre Please click on INFO button for detailed information Channel Number Running Time Status Bar Parental Level Video Quality Information HD SD Sound Modes Subtitle or Teletext languages of Subtitle or Teletext and brief summary of the highlighted _programme are included on the detailed information will be appeared if the summary is long Toggle between the Now amp Next Guide and Full Press the red button repeatedly Guide In Full Guide Scrolls backwards quickly 24 hours Press the green button repeatedly Scrolls forwards quickly 24 hours Press the yellow button repeatedly J Managing Channels Using this menu you can Add Delete or set Favourite channels and use the programme guide for digital broadcasts All Channels Shows all currently available channels 824 UKTV Gold Added Channels B288 UKTV style Shows all added channels Favourites m3 Ce Shows all favourite channels a z To select the Favourites channels you have set up press the FAV CH button on the remote m6 C control W7 ca i Channel Type mZoom mSelect fITools Programmed Shows all current reserved programmes Select a channel in the All Channels Added Channels
33. cted to TV check if Game Mode is On Set Game Mode to Off and connect external devices If Game Mode is On Picture mode is automatically changed to Standard and cannot be changed Sound mode is automatically changed to Custom and cannot be changed Adjust the sound using the equalizer 7 The Reset Sound function is activated Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults ss Energy Saving Off Low Medium High Picture Off Auto This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption If you select Picture Off the screen is turned off and you can only hear the sound Press any button to get out of Picture Off In the Tools menu Picture Off function is not supported A Press the TOOLS button to display the Tools menu You can also set the Energy Saving option by selecting Tools gt Energy Saving Melody Off Low Medium High A melody sound can be set to come on when the TV is powered On or Off The Melody does not play When no sound is output from the TV because the MUTE button has been pressed When no sound is output from the TV because the volume has been reduced to minimum with the volum button When the TV is turned off by Sleep Timer function English 21 INPUT SUPPORT
34. ded on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows N Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do To avoid the TV from falling 1 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally ow 2 Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product In this case please purchase the screws of the following specifications Screw Specifications Fora 17 29 Inch LCD TV M4 X L15 For a 32 40 Inch LCD TV M6 X L15 Z 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly Install the TV near to the wall so that it does not fall backwards MG It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Wall Untie the string before moving the TV 4 Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure
35. e and activate inactivate To activate the timer with the setting you ve chosen set to Activate Volume Select the desired turn on volume level Channel Select the desired channel Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual When Manual is selected press the B button to select the desired day of the week Press the ENTER 4 button over the desired day and the Y mark will appear You can set the hour minute and channel by pressing the number buttons on the remote control Auto Power Off When you set the timer On the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by the timer This function is only available in timer On mode and prevents overheating which may occur if a TV is on for too long time Broadcast Subtitle You can activate and deactivate the subtitles Use this menu to set the Subtitle Mode Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing impaired person e Subtitle Off On Switches subtitles on or off e Mode Normal Hard of hearing Sets the subtitle mode e Subtitle Language Set the subtitle language English 19 If the programme you are watching does not support the Hard of hearing function Normal automatically activates even though Hard of hearing mode is selected English is the default in cases where the selected language is unavailable in the broadcast You ca
36. e store button O exit 5E ols clk reveal Used to display the hidden text answers to quiz games for example To display normal screen Exit from the Teletext display amp sub page Used to display the available sub page 5 l 9 Bo a i o 2 ress it again 1 0 a page up ARA O amp size Used to display the next Teletext CU Press to display the double size SEE APANG PA aa letters in the upper half of the screen O page down aL Y D For lower half of the screen press Used to display the previous Teletext ee it again To display normal screen page al g press it once again O amp hold RENN D 4 store WJ Used to hold the display on a given page if the selected page is linked with several secondary pages which follow Used to store the Teletext pages Colour buttons red green yellow E 13 S blue on automatically To resume press it PX YA If the FASTEXT system is used Agan by a broadcasting company the Gi index 5 I Used to display the index contents page at any time while you are viewing Teletext E9 cancel Used to display the broadcast when searching for a page different topics covered on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is displayed with other coloured information that can be selected in the s
37. enu Child Lock Off On This feature allows you to prevent unauthorized users such as children from watching unsuitable programme by muting out video and audio You can lock some channels in Channel List Child Lock is available only in TV mode English 20 Parental Lock This feature allows you to prevent unauthorized users such as children from watching unsuitable programme by a 4 digit PIN Personal Identification Number code that is defined by the user The Parental Lock item differs depending on the country When the Parental Lock is set the f symbol is displayed Allow All Press to unlock all TV ratings Block All Press to lock all TV ratings Change PIN You can change your personal ID number that is required to set up the TV If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER Off gt MUTE 8 2 4 POWER On General Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game menu Restrictions on game mode Caution To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available in regular TV PC and Ext mode If the picture is poor when external device is conne
38. hannels have either perfect reception quality or you will not receive them at all So unlike analogue channels you cannot fine tune a digital channel You can however adjust your antenna to improve the reception of available digital channels If the signal strength meter indicates that the signal is weak physically adjust your antenna to increase the signal strength Continue to adjust the antenna until you find the best position with the strongest signal English 22 0 Software Upgrade To keep your product up to date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal It will automatically detect these signals and display the software upgrade banner You are given the option to install the upgrade BY Channel Upgrades the software using the broadcasting signal If the function is selected during the software transmission period this function searches for available software and downloads the software The time required to download the software is determined by the signal status Standby Mode Upgrade To continue software upgrade with master power on Select On by pressing the A or V button 45 minutes after entering standby mode a manual upgrade is automatically conducted Since the power of the unit is turned on internally the screen may be on slightly for the LCD product This phenomenon may continue for more than 1 hour until the software upgrade is
39. he volume of external device connected to your TV then adjust the TV volume accordingly Picture is good but no sound e Set the Speaker Select option to TV speaker in the sound menu e Make sure audio cables from an external device are connected to correct audio input jacks on the TV e Check connected device s audio output option ex You may need to change your cable box audio option to HDMI when you have HDMI connected to your TV e Ifyou are using a DVI to HDMI cable a separate audio cable is required e Deactivate SRS function if you are setting the volume over 30 value e Remove plug from headphone jack if available on your TV Noise from speaker e Check cable connections Make sure a video cable is not connected to an audio input e For Antenna Cable connection check signal strength Low signal level may cause sound distortion English 27 Issue Solution No Picture No Video TV won t turn on Make sure the AC power cord is plugged in securely to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the remote is working properly If the TV turns on it may be caused by Remote Control To fix the Remote problem refer to Remote control does not work below TV turns off automatically Check if the Sleep Timer is set to On in the Setup menu If connected the TV to your PC check your PC power settings Ma
40. ke sure the AC power cord is plugged in securely to the wall outlet and the TV If there is no signal for about 10 15 minutes with Antenna Cable connection the TV will turn off No picture Video Check cable connections remove and reconnect all cables of TV and external devices Set your external device s Cable Set top Box DVD Blu ray etc video output to match the connections to the TV input For example external device s output HDMI TV s input HDMI Make sure your connected device is powered on Make sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection Cannot receive all channels Make sure Antenna cable is connected securely Please try Plug amp Play to add available channels to the channel list Go to MENU Setup Plug amp Play and wait for all avaiable channels are stored Verify Antenna is positioned correctly Picture is distorted macroblock small block dots pixelization Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue PC Connection Not Supported Mode message Set your PC s output resolution and frequency so it matches the resolutions supported by the TV PC is always shown on source list even if not connected This is normal PC is always shown on the
41. multiple channels of digital audio The HDMI DVI terminal supports DVI connection to an extended device with the appropriate cable not supplied The difference between HDMI and DVI is that the HDMI device is smaller in size has the HDCP High Bandwidth Digital Copy Protection coding feature installed and supports multi channel digital audio PC DVIAUDIO IN Connect to the audio output jack on your PC DVI audio outputs for external devices O PCIN Connect to the video output jack on your PC DIGITAL AUDIO OUT OPTICAL Connects to a Digital Audio component such as a Home theatre receiver When the HDMI IN jacks are connected the DIGITAL AUDIO OUT OPTICAL jack on the TV outputs 2 channel audio only If you want to hear 5 1 channel audio connect the Optical jack on the DVD Blu ray player or Cable Satellite Box directly to an Amplifier or Home Theatre not the TV Yi English 4 EXT Input Output Connector Video Audio L R RGB Video Audio L R EXT O O O Only TV or DTV output is available Inputs or outputs for external devices such as VCR DVD video game device or video disc players COMMON INTERFACE Slot S co When not inserting Cl CARD in some channels Scrambled Signal is displayed on the screen The pairing information containing a telephone number Cl CARD ID Host ID and other information will be displayed in about 2 3 min
42. n select these options simply by pressing the SUBT button on the remote control Digital Text Disable Enable UK only If the programme is broadcast with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games Teletext Language You can set the Teletext language by selecting the language type English is the default in cases where the selected language is unavailable in the broadcast Preference e Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Using this feature users can select one of the languages The language selected here is the default when the user selects a channel If you change the language setting the Subtitle Language Audio Language and the Teletext Language of the Language menu are automatically changed to the selected language The Subtitle Language
43. ocedures described above RSE Edit Channel Name analogue channels only Channels can labelled so that their call letters appear whenever the channel is selected The names of digital broadcasting channels are automatically assigned and cannot be labelled Edit Channel Number digital channels only You can also edit the channel number by pressing the number buttons on the remote control Sort analogue channels only This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store Lock Unlock You can lock a channel so that the channel cannot be selected and viewed This function is available only when the Child Lock is set to On see page 20 The PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu The symbol will be displayed and the channel will be locked Select All Deselect All e Select All You can select all the channels in the channel list e Deselect All You can deselect all the selected channels You can only select Deselect All when there is a selected channel Auto Store For further details on setting up options refer to page 9 If a channel is locked using the Child Lock function the PIN input window appears English 12 Channel List Option Menu in Programmed You can view modify or delete a reserv
44. or Favourites screen by pressing the A V buttons and pressing the ENTER C4 button Then you can watch the selected channel Using the Colour buttons with the Channel List Red Channel Type Toggle between your TV Radio Data Other and All Green Zoom Enlarges or shrinks a channel number Yellow Select Selects multiple channel lists You can perform the add delete add to Favourites delete from Favourites or lock unlock function for multiple channels at the same time Select the required channels and press the yellow button to set all the selected channels at the same time The v mark appears to the left of the selected channels TOOLS Tools Displays the Delete or Add Add to Favourite or Delete from Favourite Lock or Unlock Timer Viewing Edit Channel Name Sort Edit Channel Number Select All or Deselect All Auto Store menu The Options menus may differ depending on the situation English 11 Channel Status Display Icons o An analogue channel A channel selected by pressing the yellow button A channel set as a Favourite A programme currently being broadcast A locked channel Areserved programme ODE B Channel List Option Menu in All Channels Added Channels Favourites 7 Press the TOOLS button to use the option menu Option menu items may differ depending on the channel status Add Delete You can delete or add a channel to display the channels you want 824 UK
45. ound mode to suit your personal preferences A Press the TOOLS button to display the Tools menu You can also configure the sound mode by selecting Tools Sound Mode AA Equalizer Standard SRS TruSurround HO Off Selects the normal sound mode ij Music Emphasizes music over voices Auto Volume Movie Provides the best sound for movies Clear Voice Emphasizes voice over other sounds Custom Recalls your customized sound settings Q Equalizer The sound settings can be adjusted to suit your personal preferences Mode You can select a sound mode to suit your personal preferences Balance Controls the balance between the right and left speakers 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment To adjust the level of different bandwidth frequencies Reset Resets the equalizer settings to the default values Q SRS TruSurround HD Off On SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats A Press the TOOLS button to display the Tools menu You can also set the SRS TruSurround HD by selecting Tools SRS TS HD Q Audio Language digital channels only You can change the default value for audio languages Displays the language information fo
46. play dialogbox will appear 4 Navigate to the Settings tab on the display dialog box The correct size setting resolution Optimum 1360 x 768 pixels If a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box English 15 Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution The resolutions in the table are recommended D Sub and HDMI DVI Input Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity Mode Resolution KHz Hz MHz H V IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 I 832 x 624 49 726 74 551 57 284 l VESACVT 720x576 35 910 59 950 32 750 1280 x 720 44 772 59 855 74 500 1280 x 720 56 456 74 717 95 750 l VESADMT 640 x 480 31 469 59 940 25 175 640 x 480 37 500 75 000 31 500 640 x 480 37 861 72 809 31 500 sl 800 x 600 37 879 60 317 40 000 800 x 600 46 875 75 000 49 500 800 x 600 48 077 72 188 50 000 1024 x 768 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 1360 x 768 47 712 60 015 85 500 VESAGTF 1280 x 720 52 500 70 000 89 040 l When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The inte
47. r or there is noise in the test pattern select Yes HD Connection Guide There may be a problem with the TV Contact Samsung s call centre for assistance Contact Samsung e No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Sound Test If you think you have a sound problem please perform the sound test You can check the sound by playing a built in melody sound through the TV Does the problem still exist with this sound test appears on the screen If you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button e Yes If during the sound test you can hear sound only from one speaker or not at all select Yes There may be a problem with the TV Contact Samsung s call centre for assistance e No If you can hear sound from the speakers select No There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Signal Information digital channels only Unlike analogue channels which can vary in reception quality from snowy to clear digital HDTV c
48. r the incoming stream You can only select the language among the actual languages being broadcast Q Audio Format MPEG Dolby Digital digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function The Audio Format appears according to the broadcasting signal English 17 Q Audio Description digital channels only This is an auxiliary audio function that provides an additional audio track for visually challenged persons This function handles the Audio Stream for the AD Audio Description when it is sent along with the Main audio from the broadcaster Users can turn the Audio Description On or Off and control the volume Press the AD button on the remote control to select Off or On Audio Description Off On Turn the audio description function on or off Volume You can adjust the audio description volume Volume is active when Audio Description is set to On LL Auto Volume Off On Each broadcasting station has its own signal conditions and so it is not easy to adjust the volume every time the channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Auto Volume
49. re operation If the signal is weak or distorted you may have to fine tune the channel manually Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset by pressing the A or V button and then press the ENTER C button Only Analogue TV channels can be fine tuned LNA Low Noise Amplifier If the TV is operating in a weak signal area the LNA function can improve the reception a low noise preamplifier boosts the incoming signal Not available in DTV or external input mode English 10 Using the Now amp Next Guide Full Guide Now amp Next Guide Ta DIVA 900 fin 240 Tue 1 Jun DIVA 900 fin 240 Tue 1 Jun Freshmen On Campus Freshmen On Campus 2 00 2 30 1 2 00 2 30 No Detailed Information mi No Detailed Information 16 00 17 00 17 00 18 00 fin ITV Play Kerrang Kiss oneword SmashHis Smash HisESUNday Smash His Watch Information a Full Guide a Exit G Watch Information m Now Next m 24 Hours a Exit To Then Watch a programme in the EPG list Select a programme by pressing the A V 4 B button Exit the guide Press the blue button If the next programme is selected it is scheduled with the clock icon displayed If the ENTER C button is pressed again press the lt gt button to select Cancel Schedules the scheduling is cancelled with the clo
50. rlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG is not supported J Setting up the TV with your PC Preset Press the SOURCE button to select PC mode Q Auto Adjustment Auto Adjustment allows the PC screen of set to self adjust to the incoming PC video signal The values of fine coarse and position are adjusted automatically This function does not work in DVI HDMI mode A Press the TOOLS button to display the Tools menu You can also set the Auto Adjustment by selecting Tools Auto Adjustment Brightness 145 Screen Advanced Settings Picture Options Picture Reset QO Screen Coarse Fine The purpose of picture quality adjustment is to remove or reduce picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned on the centre of screen PC Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or V button to adjusting the Vertical Position Press the lt or B button to adjust the Horizontal Position Image Reset You can replace all image settings with the factory default values English 16 SOUND CONTROL J Configuring the Sound Menu Q Mode Standard Music Movie Clear Voice Custom You can select a s
51. s Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions 1 Press the MENU button The main menu is displayed on the screen Its left side has icons Picture Sound Channel Setup Input Support 2 Press the A or V button to select one of the icons Press the 4 or gt button to access the icon s sub menu 3 Press the A or V button to move to items in the menu Press the ENTER 4 button to enter items in the menu 4 Press the A lt P gt button to change the selected items Press the RETURN button to return to the previous menu 5 Press the EXIT button to exit from the menu Using the remote control buttons Backlight Contrast Brightness Sharpness Colour Button Operations Button Operations MENU M Display the main on screen menu Move the cursor and select an item RETURN 5 Return to the previous menu A V lt gt Select the currently selected item ENTER C 6 EXIT Exit the on screen menu Confirm the setting Example Setting the TV s Brightness in the Picture Menu Adjusting the Brightness to 80 1 Press the MENU button to display the menu 2 Press the ENTER 4 button to select Picture 3 Press the A or V button to select Brightness 4 Press the ENTER C4 button 5 Press the lt or B button until the brightness becomes 80 6 Press the ENTER 4 button Press the EXIT button to exit
52. utes If an error message is displayed please contact your service provider When the channel information configuration has finished the message Updating Completed is displayed indicating that the channel list is now updated You must obtain a Cl CARD from a local cable service provider Remove the Cl CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it Insert the Cl Card in the direction marked on it The place of the COMMON INTERFACE Slot may be different depending on its model CAM is not supported in some countries and regions check with your authorized dealer MPONENT IN AV IN Connect component video cables optional to component connector Pr Ps Y on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD If you wish to connect both the Set Top Box and DTV or DVD you should connect the Set Top Box to the DTV or DVD and connect the DTV or DVD to component connector Pr Ps Y on your set The Pr Ps and Y connectors on your component devices DTV or DVD are sometimes labelled Y B Y and R Y or Y Cb and Cr Connect RCA audio cables optional to R AUDIO L on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD The COMPONENT IN jack is also used as the AV IN jack Connect the video cable to the COMPONENT IN AV IN Y VIDEO jack and the audio cable to the COMPONENT IN AV IN
53. utton Plug amp Play You can set the menu language Menu Language English If you want to reset this feature 1 Press the MENU button to display the menu Press the A or Y button to select Setup then press the ENTER button 2 Press the ENTER C button again to select Plug amp Play 3 Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 If you want to change PIN number use the Change PIN function refer to page 20 The Plug amp Play feature is only available in the TV mode English 8 J Viewing the Display The display identifies the current channel and the status of certain audio video settings Press the INFO button to viewing the information Press the INFO button on the remote control The TV will display the channel the type of 48 11 Thu 6 Jan sound and the status of certain picture and sound settings Life On Venus Avenue No Detalld Information e A V You can view other channel s information If you want to move to the currently selected channel press ENTER 4 button e 4 gt You can view the desired program s information at the current channel Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically CHANNEL CONTROL J Configuring the Channel Menu Q Country The PIN number input screen appears Enter your 4 digit PIN number Gown Analogue Channel 8 Auto Store
54. ve effect are not covered by the Warranty e Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images 2009 Samsung Electronics Co Ltd All rights reserved CONTENTS m Viewing the Control Panel m Configuring the Sound Menu m Accessories m Selecting the Sound Mode m Viewing the Connection Panel SETUP m Remote Control sssececeeeseceeees I Configutitig fe Setup MeN a osrcecrtseencceeeceensaevesnemmecensinnerneaeoanns 19 m Installing Batteries in the Remote Control BEEN INPUT SUPPORT eee mens m Configuring the Input Menu m Placing Your Television in Standby Mode m Configuring the Support Menu m Plug amp Play Feature m Viewing the Display RECOMMENDATIONS FOR USE CHANNEL CONTROL m Teletext Feature AA m Installing the Stand ka ee Menu m Installing the Wall Mount Kit m Using the Anti Theft Kensington Lock oy m Securing the Installation Space 26 m Securing the TV to the Wall m Troubleshooting m Specifications 2 3 4 6 6 owen PICTURE CONTROL m Configuring the Picture Menu m Using Your TV as a Computer PC m Setting up the TV with your PC Q License SRS C TruSurround HD SRS and symbol are trademarks of SRS Labs
55. vice into the Kensington slot on the LCD TV and tum it in the locking direction exo 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object lt Optional gt English 25 J Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product Install the product so the required distances shown in the figure are kept When using a stand or wall mount use parts provided by Samsung Electronics only Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling Ifyou use parts provided by another manufacturer it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation The appearance may differ depending on the product When installing the product with a stand When installing the product with a wall mount oe fiom S tom 10cm 1 10cm 10cm 1 10cm Securing the TV to the Wall not hang over or destabilize the TV doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provi
Download Pdf Manuals
Related Search