DVRN960 Series Setup Guide - Tri
Contents
1. Auto Focus Basic Playback Operation Search By Time Press SEARCH to enter the Search menu Move the cursor to From and press ENTER to start playing the recorded video from the beginning of the database Move the cursor to End and press ENTER and the playback will start from the end of the database Move the cursor to Select and press LEFT RIGHT keys to choose date time Press ENTER and adjust the values with UP DOWN keys Press ENTER again to confirm or ESC to abort Move the cursor to lt Begin Playback gt and press ENTER to start playing back recorded video of the selected time Press PLAY STOP again to return to live video AN NOTE If there is no available recorded video that matches the specified time and date the unit starts to playback from the next available video Calendar Search Press SEARCH to enter the Search menu Move the cursor to lt Calendar Search gt and press ENTER a calendar will show up Select any underlined date which indicates recording data are available The table on the left will display available videos of each channel within the selected date The videos are classified into four categories Normal Motion Alarm In and Video Loss shown as four different tabs on the top Then select a preferred time from the time bar Alternatively specify the values of date hour minute second under lt Select gt on the bottom right corner Move the cursor to lt Fr2. Language Setting If users wish to change language of the DVR system follow the steps below e Select lt Language gt in System menu and press ENTER e Press the UP DOWN keys to choose the preferred language Network Setup Configure the LAN setup for the DVR to properly function with Ethernet connection The default IP of the DVRN960 must be changed to avoid network conflicts e From the OSD main menu select lt System gt gt lt Network Setup gt set the lt LAN Select gt item to lt LAN gt lt PPPoE gt or lt None gt according to the network application and enter lt LAN Setup gt e For DHCP users set the DHCP to lt On gt The IP address Netmask Gateway and DNS settings are retrieved from network servers DHCP is dynamic that the settings change from time to time For Non DHCP users set the DHCP to lt Off gt IP address Netmask Gateway and DNS settings must be set Please obtain the information from the network service provider To change the IP address Netmask Gateway and DNS value press UP DOWN keys to move the cursor to the item Use LEFT RIGHT keys to access each section and press ENTER then change the value with UP DOWN keys e PPPoE users must set the lt PPPoE Account gt and lt PPPoE Password gt as well e When complete the settings press ENTER to confirm and save the settings or press ESC abort Dome Camera Control Dome Camera Connection amp Settings e See section Pin Definit
3. Northern DVRN960 Series Setup Guide Package Contents Inspect the packaging carton to make sure the DVRN960 was properly delivered Make sure the box contains the following items Power Supply Cord NIN Y Front Panel Northern IR Remote amp Mouse Audio amp Alarm Cables Rack Ears Manuals amp Disc 9 10 0 11 gt 1 12 gt 2 13 gt 3 14 gt 4 15 5 16 gt 6 URN COIScnes oe ee ee O CALL COPY DOME SEQ FREEZE PLAY STOP MODE SEARCH MENU oo POWER In Live or Playback mode press any key to view the corresponding video 1 Channels in full screen 2 Alarm LED Lights up when an alarm is triggered 3 Network LED nee Bae HS apap oe In addition it also blinks when data 4 Record LED Blinks when video is being recorded 1 In the OSD main menu or selection interface press this key to make 5 ENTER the selection or save settings E l l 2 In live and playback full screen viewing mode press this key to view a 2x zoom image press it again to return 6 ESC Press this key to cancel or exit from certain control modes 1 In Zoom mode these keys function as normal direction keys 7 Seeeeee ne ne press UP DOWN keys 8 MENU Press this key to enter the OSD main menu 9 SEARCH Press this key to search the recorded videos by date time or event 10 MODE Press this key to view in full screen or multiple window modes 11 PLAY Press once to start playi
4. IO RS485 Pin Definition Pin Definition Pm Definition _ Pin Definition 1 Alarm Out Open 8 Alarm In3 Reserved 22 Alarm In 13 2 Alarm Out COM 9 Alarm In 4 7 Reserved 23 Alarm In 14 3 RS485 D 10 Alarm In 5 17 Reserved 24 Alarm In 15 4 RS485 D 11 Alarm In 6 18 Alarm In 9 25 Alarm In 16 5 Reserved 12 Alarm In 7 19 Alarm In 10 6 Alarm In 1 13 Alarm In 8 20 Alarm In 11 7 Alarm In 2 14 Alarm Out Close 21 Alarm In 12 Pin Definition of Audio 16CH models Pin Definition Pin Definition Pin Definition _ Pin Definition 1 Audio In 1 8 Audio In 15 15 Audio In 4 22 GND 2 Audio In3 9 GND 16 Audio In 6 23 GND 3 Audio In5 10 GND 17 Audio In 8 24 GND 4 Audio In7 11 GND 18 Audio In 10 25 Reserved 5 Audio In 9 12 Reserved 19 Audio In 12 6 Audio In 11 13 Main Audio Out 20 Audio In 14 7 Audioln13 14 Audio In 2 21 Audio In 16 Live Panel Buttons The functional buttons are displayed in the Live Panel when the mouse pointer moves to the right of the screen Refer to the table below for definition of each button Item Icon Icon Descriptio Icon Description Enter Up Esc Left Down Right Mode i Freeze Q Search Play Stop Sequence Menu g Call Monitor Dome camera Control Power On the DVR Please follow the proper power on procedures
5. Video e Click lt Play gt on the main window toolbar and then lt Remote Playback gt tab e lt From gt and lt To gt on top of the screen display the date and time from which recorded video is available for playback e Choose lt Playback gt in lt Select gt field to playback the recorded video e Select the date and time of the segment to play back from the lt Start gt field The date and time can be changed by either typing desired numbers directly or using the arrow buttons e Click lt OK gt to start the playback or click lt Close gt to abort Playback Local drv File e Click lt Play gt on the main window toolbar and then lt Local Playback gt tab e Click lt Open gt and the file selection screen is displayed Select the drv video file to playback and click lt OK gt e Click lt OK gt to start the playback or click lt Cancel gt to abort e View the video playback by using the Playback controls e To end the playback click lt Live gt to return to live video Playback Local avi Files e Start the windows media player or other media players from lt Start gt menu or any other possible access e Select lt File gt and then lt Open gt e Select the wanted avi file and click lt Open gt AN NOTE The avi files for each channel are stored separately Therefore the video can be played back in single channel full screen mode only Playback Event Video e Click SEARCH on the main window toolb
6. ar The Event List appears e Scroll through the Event List and highlight the interested events e Double click on the desired event to view the event video Playback Controls Fast Backward Fast Forward Step Backward Step Forward Play Pause
7. erse forward respectively Press FREEZE again to continew playing back the video PLAY Press to start the playback or to stop playing back the video and return to Live mode LEFT RIGHT Playback Controls of Control Panel Buttons Icon Description Icon Description Time Frame of the Previous Time Bar Time Frame of the Next Time Bar Backward Playback a Click repeatedly to increase speed by A 1x 2x 4x 8x 16x or 32x Step Backward Only shows when playback is paused TI Pause Playback Mark Video Export Time WwW Forward Playback Click repeatedly to increase speed by 1x 2x 4x 8x 16x or 32x Step Forward Only shows when playback is paused VFL a 4 Change Viewing Mode x Search Menu 8 al EH q x a k Return to Live Mode Scale Time Bar by 4 Hour r k N F J B 3 iat 12hr Scale Time Bar by 12 Hour Scale Time Bar by 24 Hour DVRN960 Status Bar Icons Icons that will be displayed in the status bar are listed in the following table with their descriptions Icon Description ite Descriptio Main Monitor Quick Export Call Monitor Stamp A Monitor Active Inactive Stamp B E Sequence Lock i Record Disk Error ij Event Record Disk Full li Freeze Live Mode Disk Overheat Dome Camera Control No Disk Pe Zoom Disk Almost Ful
8. ion of Alarm I O amp RS 485 and Audio for RS 485 port pin definition e Refer to the following figures Connect the R R terminals on the dome camera to the RS 485 D D terminals on the DVR by RS 485 cable respectively 4CH models Power 8CH models Power RS 485 Cable e To set up the dome protocol and ID of the camera press MENU to access the OSD main menu and select lt Camera gt Then select lt Dome Protocol gt and choose the corresponding protocol Next select lt Dome ID gt and choose a preferred ID number Note that the ID number must match the ID address defined by the dome camera e To configure the RS 485 parameters select lt System gt from OSD main menu and then select lt RS485 Setup gt The default RS 485 settings are 9600 Baud 8 Data Bits 1 Stop Bit and No Parity Control Keys in Dome Camera Control Mode DVRN960 Series i 1211109876 Set Go Preset Pan Tilt Iris Close Go Presets 1 6 Zoom In Focus Far 16CH models only Enter Auto Zoom Out Focus Near Enter Dome Camera ESC Iris Open Control Mode Control Buttons in Dome Camera Control Panel Description Description Iris Open Iris Close Focus Near Focus Far Zoom In Zoom Out Set Go Preset Points Return to Live Mode Move the Lens to the Left Move the Lens to the Right Move Up the Lens DUECO Move Down the Lens oppooo
9. l Ax 2x Forward Playback Speed 1x 2X Yx 3x As By HDD Usage 16x 32x T6x 32x bi Pause Playback mode Guest 1x 2x Backward Playback Speed 4x BK T a User s Authority Level 16x 32x 16x 32x End of Video Setup Requirements e Make sure the PC is connected to the Internet e Obtain the IP address of the DVRN960 To check the IP address of the DVR press MENU on the front panel and select lt System gt gt lt Network Setup gt gt lt LAN Setup gt gt lt IP gt to check the IP Changing Internet Setting The DVRN9Q60 only supports 32 bit IE browser However the DVR does not support IE browser under WinMetro mode e Start the IE select lt Tools gt from the main menu of the browser then lt Internet Options gt and then click the lt Security gt tab e Select lt Trusted Sites gt and click lt Sites gt to specify its security setting e Uncheck Require server verification https for all sites in this zone Type the IP address of the unit in field and click lt Add gt to add this website to the zone e Inthe Security Level area click lt Custom Level gt Under lt ActiveX controls and plug ins gt set all items to lt Enable gt or lt Prompt gt e Click lt OK gt to accept the settings and close the lt Security Settings gt screen Using the Remote Software e Start IE and enter the IP address of the DVRN960 in the address bar e The ActiveX controls and plug ins dialog
10. ng back the recorded video Press again to exit 12 FREEZE Press this key to freeze the current viewing screen 3625 Cincinnati Avenue Rocklin CA 95765 888 874 3336 www northernvideo com 13 SEQ Press this key to start an automatic sequence display of cameras 14 DOME Press this key to enter the Dome Camera Control mode 15 COPY This key is used for marking time in quick video export function 16 CALL Press this key to control call monitor 17 Power Key Press this key to power on the DVR om a a Rear Panel 4CH models 10 9 8 VGA output is offered for connecting to VGA monitors 1280x1024 1 Maln Monitor VGA 1024x768 resolutions recommended for 4 3 aspect monitors 2 USB 2 0 Port The USB 2 0 port allows users to connect external USB devices to the unit such as a USB ThumbDrive or a USB mouse Connect the power supply cord shipped with the DVR Use of 3 FowerdJack other power supply cords may cause overloading 4 LAN 10 100 1000M The DVR is capable of networking and it allows the videos to be RJ 45 viewed over the LAN network or the Internet via internet browsers HDMI output is offered for connecting to a HDMI main monitor 5 Main Monitor HDMI Supports 1080p 720p 1280x1024 1024x768 resolutions 6 Alarm I O RS 485 amp The DVR provides alarm I O RS 485 amp Audio In ports that offer Audio In Out
11. om gt or lt End gt and press ENTER to indicate the beginning or the end of the database Press lt Begin Playback gt and press ENTER to start playing back the selected video Search by Event Press SEARCH to enter the Search menu To search event video that was recorded on a specific camera Use LEFT RIGHT keys to move the cursor and press ENTER to select or de select the channel Move the cursor to lt Event List gt and press ENTER to list the event video of the selected channels The list displays each event by date time triggered camera and alarm type The latest recorded event video will be listed on the top To exit the event list press ESC Use UP DOWN keys to scroll through the Event List Press the buttons below to see the previous or next pages of the Event List Press ENTER to playback the selected event video AN NOTE The event list displays only the first 1024 events as some events are deleted others will be displayed Playback Controls Button Description The button is to rewind the recorded video while playing back Press the button repeatedly to increase the speed of reverse playback by 1x 2x 4x 8x 16x or 32x The button is used to play the recorded video fast forward Press this button repearedly to increase the speed of forward playback by 1x 2x 4x 8x 16x or 32x Press FREEZE to pause the playback When the recorded video is paused press FREEZE LEFT RIGHT to playback the video single step rev
12. t offer users the a i i flexibility to connect the unit to other devices 7 Main Monitor BNC BNC output is offered for connecting to a BNC main monitor The same amount of BNC connectors beneath Video In BNC are S Vigan OUL ENG offered for looping out the video from the specific input A group of BNC connectors is provided for video input streams from 9 Video In BNC installed cameras The number of connectors equals to the number of channels 10 Call Monitor BNC BNC connector is provided for connecting to a BNC call monitor 11 Audio In Out An Audio connector is provided for connecting audio input devices for all channels and an audio ouput device for the Main monitor Pin Definition of Alarm I O amp RS 485 and Audio Pin Definition of Alarm I O amp RS 485 and Audio In 4CH 8CH models ALARM IO RS485 Pin Definition GND 10 Alarm In 1 19 Audio In 2 GND 11 RS485 D 20 Alarm In 8 8CH only 3 Audio In 7 8CH only 12 Alarm Out COM 21 Alarm In 6 8CH only 4 Audio In 5 8CH only 13 Alarm Out Open 22 Alarm In 4 5 Audio In 3 14 GND 23 Alarm In 2 6 Audio In 1 15 Main Audio Out 24 RS485 D 7 Alarm In 7 8CH only 16 Audio In 8 8CH only 25 Alarm Out Close 8 Alarm In 5 8CH only 17 Audio In 6 8CH only 9 Alarm In3 18 Audio In 4 Pin Definition of Alarm I O amp RS 485 16CH models ALARM
13. to avoid damaging the DVR e Connect all necessary components e g monitor USB mouse and cameras before powering on the DVR e Check the type of power source before plugging in the power cord to the DVR The acceptable power input is between AC110V AC240V e After the power key on the front panel is blinking press it to power on the DVR Select Viewing Mode e Press MODE repeatedly to select the preferred display mode The available viewing modes are full screen 4 window 9 window and 16 window e Press FREEZE to pause the current viewing image A NOTE 9 window viewing mode is only available for 8CH and 16CH models As for 16 window viewing mode it is only available for 16CH models EECA Enter the OSD main menu and setup some basic configuration of the DVR The basic configuration can be set via either the DVR or DVRRemote the remote software Enter OSD Main Menu e Press MENU to enter the OSD main menu e Select the administrator account admin to login Enter the preset password 1234 e It is strongly suggested to change the password to prevent unauthorized access Date Time Setting Follow steps below to setup date time before the recording starts Refer to the User s Manual for advanced setup of Time Sync function e Select lt Date Time gt in System menu e Select the date and time and adjust the value with UP DOWN keys e The new date and time settings take effect after the changes are confirmed
14. users the flexibility to connect the unit to other devices 7 Main Monitor BNC BNC output is offered for connecting to a BNC main monitor r The same amount of BNC connectors beneath Video In BNC are 9 Video OUt BNG offered for looping out the video from the specific input A group of BNC connectors is provided for video input streams 9 Video In BNC from installed cameras The number of connectors equals to the number of channels 10 Call Monitor BNC BNC connector is provided for connecting to a BNC call monitor 16CH models 21 11 10 9 CA O OHOHOHOM HOHO MOYO HE HOMO gas MAPANE K OHOHOHOHOHOHOHO W HOHO J AOI TE 34 5 6 7 8 1 Main Monitor VGA VGA output is offered for connecting to VGA monitors 1280x1024 1024x768 resolutions recommended for 4 3 aspect monitors The USB 2 0 port allows users to connect external USB devices to AA eee the unit such as a USB ThumbDrive or a USB mouse 3 Power Jack Connect the power supply cord shipped with the DVR Use of other power supply cords may cause overloading 4 LAN 10 100 1000M The DVR is capable of networking and it allows the videos to be RJ 45 viewed over the LAN network or the Internet via internet browsers i HDMI output is offered for connecting to a HDMI main monitor 5 Main Monitor HDMI Supports 1080p 720p 1280x1024 1024x768 resolutions 2 The DVR provides alarm I O and RS 485 ports tha
15. will show up twice for confirmation click lt YES gt to accept ActiveX plug ins The DVRRemote plug ins will be downloaded and installed on the PC automatically when the connection is successfully made AN NOTE Do not enter any leading 0 characters in the address for example 192 068 080 006 should be entered as 192 68 80 60 AN NOTE If the default trigger port 80 is changed to another port e g port 81 the IP address should be entered as 192 68 80 6 81 Version verification starts automatically to verify whether DVRRemote was installed This process may take up to 30 seconds When the software is completely downloaded and installed the Login Window is displayed Enter username and password The default username and password is admin and 1234 The following picture shows the display window of the DVRRemote Refer to the table below for brief description of functional items Item Description Audio On Off 4 3 Viewing Aspect 2 Way Audio Talk Capture Snapshot Instant Recording Search Event List Setup Menu Display Mode Playback Video Bandwidth Normal Dual Stream View Live Camera Dome Camera Control Download DVRPlayer Playback Control Select Picture Size oo Select Camera HDD Status For more information on DVRRemote see User s Manual wN DVRRemote Playback Playback Remote
Download Pdf Manuals
Related Search