MD USER MANUAL
Contents
1. E fri jado USER MANUAL MD SERIES EN Original Instruction MD ZEE fri jado MD KEEP THIS USER MANUAL FOR FUTURE USE O 2013 Fri Jado BV Etten Leur The Netherlands We advise you to contact your supplier for the guarantee period and conditions Further we refer to our General Terms and Conditions for Sales and Delivery that are available upon request The manufacturer does not accept any liability for damage or injury caused by failing to adhere to these regulations or by not observing the usual caution or care in actions operation maintenance or repair activities even if not explicitly described in this manual As a result of constant commitment to improvement it may happen that your unit deviates in detail from what is described in this manual For this reason the given instructions are only a guideline for the installation use maintenance and repair of the unit referred to in this manual This manual has been composed with the utmost care The manufacturer shall however not be held responsible for any mistakes in this manual nor for any consequences thereof The user is allowed to copy this manual for own use Further all rights are reserved and nothing in this manual may be reproduced and or made public in any way Modifications In case of unauthorised modifications in or on the unit every liability on the part of the manufacturer becomes null and void EN 2 20 9123715 1305 E fri jado MD EN 32. wall socket e avoid damage remove the lower skirts when necessary e heunits are not suited to pass ledges or obstacles higher than 10 mm e Make sure that the wheels can move freely so they never touch the power lead see Figure 1 Figure 1 1 4 3 Hygiene The quality of a fresh product always depends on hygiene It is essential that products are packaged immediately after preparation At that moment the core temperature of the products should at least be 85 C gt Immediately remove products in damaged packaging from the equipment Clean all components that that have come in contact with products from damaged packaging Refer to the instruction Cleaning the unit 1 5 Service and technical support The electrical schematics of your unit is included In case of malfunctions you can contact your dealer service agent Make sure you have the following data available e Model e Serial number This data can be found on the identification plate 1 6 Storage the unit will not be used temporarily and will be stored follow these instructions e Clean unit thoroughly Wrap the unit from getting dusty e Store the unit in a dry non condensing environment 1 7 Disposal Dispose of the machine any components or lubricants removed from it safely in accordance with all local and national safety and environment requirements EN 7 20 9123715 1305 fri jado MD 2 DESCRIPTI
3. 20 9123715 1305 _A fri jado MD CONTENTS t INTRODUCTION u u uuu 5 1 1 O DOE O E 5 1 2 Identilication OF Ene UNE uuu uu u L u Z he RS det 5 1 3 RiCtosrams and SvImDOIS uuu uuu u u uuu 5 1 4 Safety InSITUCUO S u uu IR o 6 Ja l CEN 1 S Su _________ 6 7 u n naa 7 1A sss SA os 7 1 5 Service technical SUPPO uuu u uuu 7 1 6 SO PAP gn 7 1 7 sle 8 7 2 DESCRIPHCNOP 5 1 WIN al a ess 8 2 1 i uu 8 2 2 lien ll O 8 2 3 Ae OOS E E 8 3 INSTALLATION AND FIRST USE 9 OPERATION AND 10 4 1 SE O Pp E DO EE 10 4 2 Checking the temperature in the unt sese ee eee eee eee ee eee eee 11 4 3 Checking the product nennen nennen 11 4 4 WI ri EE 11 5 DAILY MAINTENANCE uuu u E 12 6 MALFUNCTIONS AND SERVICE WHAT TO DO 13 6 1 a Ei uuu u tt 14 6 2 Placing UE RE 15 6 3 Replacing the child guard a rr nennen nennen 15 6 4 Replacing CMS Mans CONC L 15 Js TECHNICAL SPECIEICATION Sorento 16 Be
4. 5 kg WARNING Always use the brakes on both front wheels gt gt PP P 1 4 1 General The user of the unit will be fully responsible for abiding the locally prevailing safety rules and regulations The pictograms labels instructions and warning signs attached to the unit are part of the safety measures They may never be covered or removed and have to be clearly visible during the entire lifetime of the unit Immediately repair or replace damaged or illegible pictograms warnings and instructions Only pack the products in bags or containers that are suitable for this purpose To ensure good contact with the heated trays only place a single layer of products Make sure that the air slot at the front of the shelf remain free from obstructions The unit must be cleaned regularly to ensure proper functioning This appliance is not intended for the use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety e Children should be supervised to ensure that they do not play with the appliance The packaged material used must be heat resistant to at least 95 C EN 6 20 9123715 1305 E fri jado MD 1 4 2 Moving When moving the unit e Before moving the unit first switch off the mains voltage by pulling the plug from the
5. ACCESORIES sui 17 EN 4 20 9123715 1305 ES fri jado 1 INTRODUCTION 1 1 General This manual is intended for the user of the MD Multi Deck The features and controls are being described along with directions for the safest and most efficient use in order to guarantee a long life of the unit All pictograms symbols and drawings in this manual apply to the MD 1 2 Identification of the unit The identification plate can be found on the outside of the machine and contains the following data e Name of the supplier or the manufacturer Model Serial number Year of construction Voltage Frequency Power consumption 1 3 Pictograms and symbols In this manual the following pictograms and symbols are used WARNING Possible physical injury or serious damage to the unit if the instructions are not carefully followed WARNING Hazardous electrical voltage WARNING Danger of getting injured by hot surfaces ouggestions and recommendations to simplify indicated actions Recycling symbol Direction of view symbol DE y b gt gt EN 5 20 9123715 1305 fri jado 1 4 Safety instructions WARNING The top and bottom of the trays and columns at the back of the unit can be very hot WARNING The maximum load on top of the unit may never exceed 50 WARNING The maximum load per shelf may never exceed 35 WARNING The maximum load of the drawer may never exceed 2
6. N 400 230 50 Hz 4310 kW 16 A 3 CEE form 2 40 m Voltage 1N 230V 50 Hz 2350 kW 3490 kW 16 A2 pole 16 A 3 PE CEE form 2 40 m 2 40 m Frequency Required power Plug Power cord length Electrical installation 4 level 1N 230V 3 230 V 3N 400 230 Voltage 1N 230V 50 Hz 3000 kW 16 A 2 pole PE 2 40 m Frequency Required power Plug Power cord length Electrical installation 5 level 1N 230V 3 230 V 3N 400 230 50 Hz 3600 kW Voltage Frequency Required power Plug form 5400 kW 16 A 3 CEE 50 Hz 4500 kW 16 A 3 CEE form 2 40 m 1N 230V 3 230 V 3N 400 230 50 Hz 1N 230V 3 230 V 3N 400 230 50 Hz 6540 kW 16 A 3 CEE form 16 A 3 CEE form Power cord length EN 16 20 9123715 1305 EE fri jado 8 ACCESSORIES E fri jado MD EN 18 20 9123715 1305 E fri jado MD EN 19 20 9123715 1305 E fri jado Fri Jado BV Oude Kerkstraat 2 4878 Etten Leur The Netherlands Tel 31 0 76 50 85 400 Fax 31 0 76 50 85 444 EN 20 20 MD 9123715 1305
7. ON OF THE UNIT 2 1 Technical description The MD uses convection heat The plating of the unit is made of stainless or coated steel and shatter resistant clear side glass 2 2 Intended use The MD has been designed maintain products at a temperature at 65 70 C for up to four hours Any other use will not be regarded as intended use The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly adhere to the safety guidelines and instructions in this manual or due to carelessness during Installation use maintenance and repair of the unit referred to in this manual and any of its accessories Use the unit in perfect technical condition only 2 3 Accessories Your unit contains the following standard accessories e User manual For optional accessories refer to section 8 EN 8 20 9123715 1305 fri jado MD 3 INSTALLATION AND FIRST USE Remove all packaging materials from the unit Remove the foil from the illuminated sign shelves and child guard all temporary tape Before starting to use the unit clean the inside with a damp cloth Avoid excessive use of water on the shelves Make sure no water goes into the air slots Clean the side glass both inside and out Avoid scratches on all plastic and varnished parts do NOT use aggressive detergents UT Do o All packing materials used for this unit are suited for recycling After unpacking check the
8. state of the unit In case of damage store the packing material and contact the transporter within fifteen working days after receiving the goods EN 9 20 9123715 1305 MD gt fri jado 4 OPERATION AND USE 4 1 Switch on ly the heating and lighting be switched separate Note Depending on execution can EN 10 20 fri jado MD 4 2 Checking the temperature in the unit 4 4 Switch off EN 11 20 9123715 1305 XE fri jado 5 DAILY MAINTENANCE 9123715 1305 EN 12 20 fri jado MD 6 MALFUNCTIONS AND SERVICE WHAT TO DO 6 1 Temperature fault EN 13 20 9123715 1305 E fri jado MD 6 2 Replacing a lamp EN 14 20 9123715 1305 fri jado MD 6 3 Placing a price strip 6 4 Replacing the child guard 6 5 Replacing the mains cord WARNING Hazardous electrical voltage If the mains cord is damaged it must be replaced by the manufacturer his service agent or a similarly qualified person in order to avoid hazards EN 15 20 9123715 1305 E fri jado IMD 7 TECHNICAL SPECIFICATIONS WARNING Consult the identification plate to get the proper specifications of the unit The electrical data may vary from country to country Model A A MD60 MD100 MD120 Dimensions x o Weight Electrical installation 3 level 1N 230V 3 230 V 3N 400 230 50 Hz 1N 230V 3 230 V 3
Download Pdf Manuals
Related Search