GB/US . . . . .DH .2000
Contents
1. 12 QUT une Dismantling the hoist 2 2 06 one Fest RP eru ER Rep IURE 12 3 02 55 eds How to transport h hoist tb oer e dues 12 SOS ea da How to package the hoist for transport 12 4 00 Maintenance and storage 12 4 01 Cl ningith hiolSt zeste punis mana DR EUR te some rent 12 AO usas Storing the holsl sa arrasada vend de ede nde ee pa dele aed 12 4095 mia ixo Long term storage A oL xen DAVE E A 13 4 04 How to prevent avoid corrosion 13 AOS ets Maintenance which should be carried out by the owner 13 Service and Life span 2 0 coeur m e xs 13 5 012 ss Life span and servicing of hoist 13 Ol Battery ad USOS etedi mee n a di a taa 13 0 Service check allround 2 5 aos emere de nme 14 5 04 MOU DIS SKOON ls gua Aydin seen Repas Feste Tec eo ie 15 6 00 Technical specifications 15 Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 1 00 Purpose and use 1 01 Manufacturer V Guldmann A S Graham Bells Vej 23A DK 8200 Arhus Tel 45 8741 3100 Fax 45 8741 3131 1 02 Purpose and use of hoist Purpose DH 2000 is a lifting module of the Guldmann Ceiling Mounted Lifting Systems DH 2000 is suit2. D ctor housing in order to avoid deforming it i Give the conductor housing a press to 900 ensure that the tape is in fully contact with 4 1 4 the rail 1 1 07 Slide the end stop back to the mark Unscrew the screw 1 next to the rub ber knob of the end stop and fit the spring retainer 2 into the opening of the rail undeneath the end stop The opening of the spring retainer must face the hoist The foam rubber disc 3 must be positioned at the bottom end of the spring retainer 4 behind the screw Tighten the end stop Connect the conductor housing to the charger and check the function The positioning of the conductor housing could be marked by means of the enclosed labels with charging symbols Mounting of charging station in the traverse rail system When charging in the traverse C rail system two conductor housings one for the traverse rail and one for the parallel rail are employed Further more one current receiver is employed in addition to the current receiver on the hoist The above mounting instructions apply for the mounting of the conductor hou sing in connection with trolley for traverse rail However no spring retainer is to be mounted Before mounting the trolleys for traverse rail position the current receiver on one of the trolleys for traverse rail and make sure that it will face the chosen position of the conductor housing Fit the current receiver to the hanger at th
3. not cover any part of the lifting equipment which has been alte red or changed in any way by you or others Guldmann is not responsible for problems caused by changes in the operating charasteristics of the operating system which are made after the delivery of the lifting equipment Any implied warranties including any warranties of merchant abillity or fitness for a particular purpose are limited to the term of the express warranties Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 Guldmann shall not in any case be liable for special incidental consequen tial indirect or other similar damages arising from any breach of these war ranties even if Guldmann or its agent has been advised of the possibility of such damages You must call Guldmann or your distributor for an authorization to return any defective item during the warranty period If your distributor is unable to cor rect your problem by telephone you will be provided with a return authoriza tion number and address for returning the defective item for warranty service or replacement You must insure any defective item being returned because Guldmann does not assume the risk of loss or damage while in transit Do not return items or warranty service to Guldmann The warranties set forth above are in lieu of all other express and implied warranties whether oral written or implied and the remedies set forth above are your sole and exclusive remedie
4. on the bottom of the DH 2000 starts flashing the hoist must be recharged as soon as possible The DH 2000 is placed at the charging station which is mounted in an appropriate place in the rail system and con nected to the charger When the hoist is run into position in the charging sta tion the hoist will respond with a number of beeps depending on the charging state of the battery At the sound of 3 5 beeps the battery is fully charged At the sound of 6 30 beeps recharging is required and the hoist should be recharged for a longer period If the beeping sound does not stop the batteries are defective After recharging when the hoist is run out of the charging station there will be the sound of one beep During recharging the hoist is secured in the charging station by means of a spring retainer Recharge the DH 2000 overnight or when not in use to encure a long lifespan of the batteries Connection of Charging station Recharging in single track rail systems Bring the DH 2000 to the charging station The charging station signs with a number of beep s depending on the energy level of the battery The beep is a guarantee for charging Recharging in room covering rail systems Bring the DH 2000 to the end of the traverse rail and the traverse rail to the end of the parallel rails where the charging station of the room covering system is placed The charging station signs with a number of beep s depen ding o
5. 2400 mm Total weight of hoist without sling without et a E he de se 14 5 kg Nanger RC 2 0 kg Electrical connection for charger hoist 230V 115V depending on national voltage standards Connection between charger and hoist 24V DC Consumption effect of actuator 240 VA Charger fully automatic 24V DC 0 5 Ah Chargingtime ue enr deren RR a eu E Max 8 hours Batteries gasproof and free of maintenance 2 pcs 12 4 0 Ah Battery protection at too low a voltage Yes disconnects below 17V Permitted periodic load sua the vira depen e nas 15 85 working time breaks in percentages mo densas ace sche nu ee ne done a cs 1 year U S A and countries outside the EU gt Users guide Read the entire warranties and the entire chapter in english before use of the product WARRANTIES The Guldmann lifting equipment is designed to be used for the lifting trans ferring and transporting of persons with a physical handicap who are not able to physically selftransfer or who are temporarily incapacitated by illness anesthesia or other causes This lifting equipment is designed to relieve the users their relatives and nursing personnel in the task of lifting elderly or handicapped people thereby minimizing the risk of back injury du
6. 900662 Guldmann GB US 897 08 08 900662 5 04 Trouble shooting If the DH 2000 does not react when pressing the keys of the hand control Check that the plug for the hand control is correctly inserted If the green light on the bottom of the DH 2000 does not come on when pressing the keys of the hand control Check that the emergency stop is not activated Check that the batteries are charged Check that the charger is on the hand control could be faulty or a fuse is blown in the hoist Please contact your local Guldmann representative If the green light on the bottom of the DH 2000 is still flashing after the hoist has been recharged Check that the light on the charger is on when recharging the DH 2000 Check that the charger is on Check that the charging points of the DH 2000 have been connected properly to the charging station Please contact your local Guldmann representative 6 00 Technical specifications Dimension WxHxL 350 x 190 x 245 mm Maximumilifting Capacity ss isa cares va heres em da eas 175 kg No of lifts per charging 100 with 85 kg amp 40 with 175 kg Lifting speed with 85 kg load 2000 mm pr min Lifting interval 235 2 ira ada ga did he e RR c Eie nd ES 2000 mm Min distance from pivot joint on the lifting hanger to the ceiling 400 mm Max distance from pivot joint on the lifting hanger to the ceiling
7. G GB US DH 2000 Vers 1 00 Es Guldmann ES CD CO EEE TOO DH 2000 Ceiling mounted hoist Item nos 12075 000 12075 100 1 00 Purpose and USC E e eee A ous amiens see 3 1 01 5 55 Manufacturer er enm ane ES E a m ox UR M RT Av 3 102 oss Purpose and use of hoist 3 1 09 ics Important Warming 12 a 5 mE e en Pe a ES gu 4 1 04 ons Sling safety sos ids enc ck Ee ee Ne dre Ue tt kasd 5 1 05 mns Unpacking and preparation of the hoist 5 1 00 Mounting of charging station 5 1 07 us Mounting of charging station in the traverse rail system 6 1 09 35 wenn eH Assembling before use 7 1 09 25 m e asa SWINGHKIE uen edes Yee repete sod eevee oT BE ROTE NA pede 8 2 00 2s Description of functions 9 2 01 Pictograms labels 2 seas ce E REEF ERR Y cR E Es 9 202 5 RS Operating the NOISE aa carla E ec 9 2 Safety TUNCHONS 2 56 led dE ddd E dts beta re As ds 10 2 04 Recharging connecting the hoist 10 2 055 senta Connection of Charging station 10 2106 iia AACCESSONES 0 7 1 3 00 upa eens Dismantling amp transport
8. able in all Guldmann rail systems both single track room covering and combined rail systems DH 2000 is developped for use in private homes insitutions hospitals riding schools and swimming pools where it offers full flexibility for lifting transferring and transporting of elderly and disabled persons Requirements The instruction that Guldmann offers all custumers when ordering a DH 2000 has been received When a hoist is used in an institution or in the home care service the assumption is that it will be operated by qualified staff Use slings with 4 6 lifting straps designed for use with hooks of min 8 mm Lifting to and from a sitting position When lifting from e g a wheelchair move DH 2000 towards the person to be lifted The lifting hanger should be level with the chest and positioned above the middle of the thigh Position lifting hanger parallel to the user s shoulders Now fit the lifting sling to the lifting hanger For instructions on how to fit the sling see the section entitled Fitting the sling Lifting to and from a lying position in bed The lifting hanger is placed right over the person The lifting hanger should be parallel with the person s shoulders Now fit the lifting sling to the lifting hanger For instructions on how to fit the sling see section entitled Fitting the sling Working with DH 2000 As the DH 2000 does not require any special space or power consumption and as it is
9. awings below x For use with DH 2000 the standard liftinghanger is model 21170 Q MM Loosen the pointed screws 4 with 9 the 1 5 mm Allen key to pull out the 2 axle journal 3 and the cylinder sleeve 1 Insert the cylinder sleeve Ra O s Q2 in the lifting strap 2 and mount the lifting hanger 5 For use with DH 2000 with the oval hook the lifting hanger is model 21190 Loosen the screw remove the pipe and mount the lifting hanger Reposition the pipe and tighten the screw A The pipe is mounted as shown below Please make sure that the screw is correctly X fixed and fastened after the installation y Lo _ ES EN fe AS 4 Y k E ad De A 677 Bath chair bath stretcher or horizontal lifting support are mounted direct on to the oval hook of the lifting strap by means of a snap hook with a swiveling safety The hand control is connected to the plug on the bottom of the lifting module as shown on the sketch DH 2000 is now ready for use in the Guldmann rail systems 1 09 Swing kit 1 Place the two hoists as close to each other as possible Mount the lifting hanger on the hook of hoist B Unroll the unloaded strap of the hoist A until it can be hooked onto the oval hook of the lifting hanger Continue to unroll a
10. e end of the trolley and push it into position in the eye of the hanger The solderings of the current receiver must turn away from the trolley Check that the wire is secured in the hooks placed at the bottom of the current receiver After mounting the traverse rail mount the conductor housing of the hoist as shown in the instructions and con nect it to the current receiver on the trolley for traverse rail The marked wire is the con ductor The conductor of the conductor housing is con nected to the conductor of the current receiver Stick the wire underneath the trolley for traverse rail by means of double sided adhesive tape Connect the conductor housing to the charger and check the function The positioning of the conductor housing could be marked by means of the enclosed labels with charging symbols If service repair should be necessary the conductor housing and charging station for the room covering system can be dismounted and exchanged without dismounting the rail system For servicing of the current receiver it is necessary to remove the hoist and or the travelling trolley from the rail Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 1 08 Assembling before use Place the DH 2000 lifting unit in the rail prior to mounting the lifting hanger The Guldmann lifting hanger model 21170 or 21190 is mounted a on the lifting strap as shown on the ES dr
11. easy to move around in the rail system only the user s functional level and the carer s working technique need to be considered Lift the user claer of the surface and continue transferring at this height 1 03 Fitting the sling Hook the top set of straps from the back to the hooks facing the user Hook the lower set of straps from the legs to the hooks facing away from the user From a chair wheelchair or other sitting positions Place lifting sling behind user s back e g between the back of the chair and the user s back The suspension strap marking the size of the sling for instance M indicates the centre of the sling and should follow the spine The green blue or red type marking bands run parallel to the spine The user should not sit on the sling Bring the leg straps along the outer thigh and then under the thigh between the back of the knee and the hip Now cross the leg straps in front of the user All four straps are now ready to be mounted to the lifting hanger Lying position in bed on a mattress or on the floor Turn the user on his side Place the high back sling so that its upper edge is flush with the top of the user s head Put the sling on the user so that the coloured bands run parallel to the spine Turn the user on his back and pull the sling out Bring the leg straps under the thigh and cross them over All four straps are now ready to be mounted to the lifting hooks If in doubt about how to use t
12. ed liable for defects and accidents due to use of a sling manufactured by others 1 05 Unpacking and preparation of the hoist Visual check of hoist Should the packaging be damaged on receipt each part of the hoist must be carefully examined for visible defects or deficiencies In case of suspected damage do not use the hoist until authorised by qualified service staff or the Guldmann Service Team D Parts list Pos 1 DH 2000 2 Hand switch 3 Lifting hanger if delivered 1 06 Mounting of charging station Always position the charging station together with an end stop Check that the current receiver on the hoist trolley for traverse rail is turned the right way so that it faces the conductor housing Make a mark on the rail to indicate where the end stop is to be positioned A Loosen the end stop and slide it up the rail DM Pull the wire of the conductor housing out of the rail and position the rear end of the 1 conductor housing opposite the mark B al Remove the cover film from the tape on the conductor housing and push one side of the conductor housing into the rail ac Push the other side of the conductor hou Val 0 sing into the rail so that it rests on the bot tom of the rail Check that the conductor housing is positioned opposite the mark Push the conductor housing into position in the rail Push right at the side of the condu Ju
13. electric switch track is activated by pressing the key on the hand control once Safety Via mechanical safety devices the product secures the hoist against running off the rail or getting jammed Turntable The turntable is used in rail systems where it is necessary to combine 3 or 4 directions The DH2000 is positioned in the centre of the turntable prior to use The turntable is activated by pressing the key of the hand control When activating the key once the turntable turns 90 Keep pressing the key till the desired direction is reached Safety Via mechanical safety devices the product secures the hoist against running off the rail or getting jammed 11 Combi lock The Combi lock is used when joining a single track system with a room covering system or when joining two room covering systems By using the Combi lock the two systems are locked together for instance when the hoist pas ses from the single track system in the bedroom on to the traverse rail in the room covering system in the bathroom The Combi lock is activated by pressing the key of the hand control once Safety Via mechanical safety devices the product secures the hoist against running off the rail or getting jammed 3 00 Dismantling amp transport 3 01 Dismantling the hoist The hoist can be dismantled see section 1 8 3 02 How to transport the hoist The hoist can be dismantled for transport and storage see section 3 1 3 03 How to
14. he sling please contact your supplier Guldmann A S cannot be rendered liable for inadequate anchoring resulting from incorrect estimation of mounting conditions Guldmann cannot rendered liable for defects or accidents due to incorrect fitment or assesment of slings Important warning Read the user manual fully before using the DH 2000 Do not exceed the max load of 175 kg If accessories are used that are marked with a lower load capacity than 175 kg the lowest load capacity decides the maximum load of the DH2000 Use the hoist to lift persons only Do not use DH 2000 where there is a risk of considerable amounts of water continuously coming into direct contact with the hoist If the DH 2000 shows defects during use operation must be discontinued Contact your local Guldmann representative for a possible repair The DH 2000 must not be used witout the extension strap if the distance bet ween rail and floor exceeds 3 metres The string of the emergency lowering unit should be adapted to the reach of the user Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 1 04 Sling safety Only CE marked slings with a lifting capacity corresponding to or higher than the lifting capacity of the DH 2000 are to be used The lifting straps must be suitable for hooks with a diameter of 8 mm The lif ting straps must be designed for use with a four point horizontal lifting hanger Guldmann cannot be render
15. little further the lifting strap of the hoist B and then wind up the lifting strap of hoist A Once the transfer from one room to the other is carried out one of the lifting straps is unloaded hoist B Disconnect the unloaded strap from the lifting hanger Wind up the lifting strap into the hoist B where it remains until the hook is going to be used again Move the lifting hanger in hoist up to correct working height and the transfer through the door is completed Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 2 00 Description of functions 2 01 Pictograms labels Pictograms printed on bottom of the DH 2000 ini i 19 1 Charging 2 Hand 3 Emergency 4 Emergency indicator control stop lowering 2 02 Operating the hoist Hand switch and indicator lamp DH 2000 switches on automatically when pressing one of the keys 0 of the hand control gt The lamp turns green when the hoist is switched on S The hoist switches off automatically approx 1 minute after use DH 2000 will only function when the lifting hanger is mounted on i the lifting strap Lifting and lowering is activated by pressing and of the hand con trol Transport Transferring along the rail system Y Transferring and transport of the DH 2000 along the rail is carried out manu ally by the carer The transverse drive motor DH 2000 can be provided with a transverse drive motor
16. n the energy level of the battery The beep is a guarantee for charging 10 Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 2 06 Accessories Transverse drive motor The transverse drive motor makes the hoist fully automatic It is built into the DH 2000 without changing the outer dimensions and the visual impression of the hoist When the hoist is provided with the drive motor the spped is gradually increased to 8 metres minute to ensure a smooth up start IR remote control The IR remote control is often used with the hoist with transverse drive motor enabling the user to call the hoist and thus to a certain degree be indepen dent of the carer Important When the user is independent the IR remote control sender should be attached to the user so that it will always be within the reach Lifting Slings Please ask the distributor for a special leaflet on Lifting Slings Extension strap This is used if the distance between rail and floor exceeds 3 metres and is ordered separately If E G the distance is 3 5 metres between rail and floor you should order an extension strap of 0 5 metres length Switch track The switch track is used when it is necessary to divide a single track rail system into two tracks The manual switch track is activated by pulling one of the strings hanging down from the switch track The DH 2000 is driving in the direction of the string pulled The
17. oment eg swimming baths In swimming baths and bathrooms where strong gasses may be present the hoist is particularly exposed to corrosion 4 05 Maintenance which should be carried out by the owner Check at regular intervals that the lifting strap has no damages If the lifting strap is damaged DH 2000 should not be used The lifting strap must only be exchanged by an atuhorized installer 5 00 Service and Life span 5 01 Life span and servicing of hoist According to the international standard EN ISO 10535 Hoist for the transfer of disabled persons Requirements and test methods a safety inspection of the hoist must be performed at least once a year Servicing and estimation of life span are based on the annual service check and maintenance carried out by a service engineer or by the Guldmann Ser vice Team The hoist has an expected life span of 15 years The hoist must then be assessed by qualified service staff as to its future use Spare parts lists and drawings are available from manufacturer or supplier 5 02 Battery and fuses Change of batteries and fuses should be carried out by a service engineer or by the Guldmann Service Team 5 03 Service check allround During the inspection a service report shall be made describing what has been checked and exchanged Worn or defective parts shall be replaced by new spareparts from V Guldmann A S Visual check of the product Check the product f
18. or wear and tear Check the product for any deformity Check that the product does not show any other dificiencies Test of the product as during normal use Check all functions on the product with and without load eg Up down forward backward out and in Check the emergency lowering is operational Check the emergency stop is operational Check the charging indicator is operational Dismantle the cover fence Check the electrical condition of the products Check the batteries and measure the Input Voltage Output Voltage Check electrical functions and signals Check all wirings for errors and defects Check wire lead ins Check all possible conections plugs etc Check the mechanical condition oft the product Clean the product for dirt and other impurities Inspect and evaluate the vital parts of the product Exchange defective and worn Grease the product Mount the cover fence Point 1 2 is carried out one more time as a control function Have new errors or problems arisen in point 7 If new problems have arisen go back to point 3 If no problems have arisen finish the inspection When a service inspection including service work or exchange of components has taken place the final check should comprise a weight test with the product s nominal load If the DH 2000 has been silicone coated for use in wet environment this coa ting must be renewed if it shows sign of drying Guldmann GB US 897 08 08
19. package the hoist for transport Guldmann recommends that the dismantled hoist is always transported in its original packaging 4 00 Maintenance and storage 4 01 Cleaning the hoist Hoist and lifting hanger can be cleaned using a damp sponge Do not use chemicals or autoclaving to cleanse the hoist The charger must only be wiped using a dry cloth The charging system is maintenance free as it is placed inside the rail system 4 02 Storing the hoist The hoist should be kept in a dry room where the humidity does not exceed 70 per cent This is why the hoist must never be kept in bathrooms and similar areas Guldmann GB US 897 08 08 900662 Guldmann GB US 897 08 08 900662 4 03 Long term storage The hoist should be stored in cool rooms e g a basement The hoist should be stored at temperatures below 15 C due to the risk of running the batteries down The Guldmann Service Team recommends that the fuses are removed from the hoist when it is stored for long periods of time 4 04 How to prevent avoid corrosion The hoist should not be kept remain in damp surroundings for long periods Water vapour might liquefy into water on the hoist thus causing corrosion rust in the bearings The hoist should not be exposed to sudden cold or warmth This means that one should not take a cold hoist into e g a hot bathroom The DH 2000 shall be ordered with a treatment coating if it mainly is used in agressive envir
20. rring such lifting and transfer operations If the product is used in any fashion or in an irresponsible manner or for any use other than that described above or in the enclosed written instructions the manufacturer s warranty will be nullified and rendered void There are no warranties which extend beyond the description in the enclosed written instructions Guldmann warrants that its lifting equipment is free from defects in materials and workmanship under normal use Guldmann warrants that the lifting equip ment itself will perform substantially in accordance with the specifications set forth in the documentation provided with the equipment The above express warranties are made for a period of 365 days from the date the lifting equipment is delivered to you as the first user Your distributor will replace any lifting equipment which proves defective in materials or workmanship without additional charge on an exchange basis Your distributor will either replace or repair without additional charge any Guldmann lifting equipment that does not perform in substantial accordance with the specifications of the documentation Guldmann does not warrant that the functions contained in the lifting devices will meet your requirements or that the operation of the services will be unin terrupted or error free The warranty does not cover any of the part of the lifting equipment which has been subject to damage or abuse by you The warranty does
21. s Only an authorized officer of Guldmann may make modifications to this warranty or additional warranties binding on Guldmann Accordingly additional statements such as advertising or presentations whether oral or written do not constitute warranties by Guldmann and should not be relied upon as such The warranty gives you specific legal rights and you may also have the other rights which vary from state country to state country 299006 80 80 268 SN 99 uueupino 18 299006 80 80 268 SN 99 uueupno 19 Guldmann GB US 897 08 08 900662 rime to care V Guldmann A S Corporate Office Graham Bells Vej 21 23A DK 8200 rhus N TIf 45 8741 3100 Fax 45 8741 3131 info guldmann com www guldmann dk Guldmann Inc 14401 McCormick Drive Unit A Tampa FL 33626 Tel 800 664 8834 Tel 8138800619 Fax 813 880 9558 info guldmann net www guldmann net
22. which can be build into the hoist The transverse drive motor is activated by pressing or of the hand control DH 2000 with transverse drive motor can also be transported manually along the rail system when the hoist is switched on and are not activated 2 03 Safety functions Important Only use the emergency stop and emergency lowering functions in emergen cies Should it be necessary to apply the emergency safety functions the supplier must be contacted prior to using the hoist again Description of the emergency stop function If during operation the DH 2000 should not react on the functions of the hand control the lifting lowering can be interrupted by pulling the string marked STOP The DH 2000 is not ready for operation again until the emergency stop has been pushed back into the hoist again Description of the emergency lowering function If the DH 2000 fails to operate by the hand control the emergency lowering unit is activated to lower the user safely The emergency lowering unit is activated by pulling the string marked When the emergency stop or emergency unit have been activated the defect has to be repaired before the DH 2000 is ready for operation again Description of the safety strap function The lifting stops automatically when not performed vertically when the lifting strap is twisted or in case of overloading 2 04 2 05 Recharging connecting the hoist Recharging When the green lamp
Download Pdf Manuals
Related Search