USER MANUAL “Madita Fun” Posture Chair
Contents
1. Arm rest angle adjustment The angle of the arm rests can be adjusted This is very useful when a table is being used To adjust the angle loosen the top locking handle see arrow A at the side of the arm When delivered size 0 will have an adjustment length of the lower support of 20cm to 24cm To increase this length the inner tube must be t shortened To do this loosen the socket head screws press both push ca ari AANA the fest ses beat rar ane aa eu 4cm When in the required position e push buttons are then put back into the tube an e foot piece retighten the locking wheel reassembled rear grip B can be loosened to adjust the height Arm rest width adjustment The width adjustment is done by loosening the locking nuts see arrow screw C which can be found underneath the seat surface When in the required position the locking nuts should be retightened Caution After making all adjustments tighten all the screws firmly again 4 Use of accessories 4 1 Head Support The angle and height of the head rest can be adjusted To make the height adjustment loosen the bolts A on the back rest To adjust the angle loosen screws B in the articulated arms of the head support holder When adjustment is complete retighten the bolts and screws A Caution After making all adjustments tighten all the screws firmly again 4 2 Side bolsters To adjust the width height and angle loosen and2. USER MANUAL Madita Fun Posture Chair Kingkraft 26D Orgreave Crescent Dore House Industrial Estate Sheffield S13 9NQ Tel 0114 269 0697 Fax 0114 269 5145 e mail info kingkraft co uk url www kingkraft co uk STCM ISSUE 1 02 10 IMPORTANT SAFETY INSTRUCTONS Dear Customer Thank you for purchasing the Madita Fun Posture Chair We ask you to carefully read through this manual before attempting to use the chair We reserve the right to make technical alterations at any time Please also make sure that each person and any carer who uses the chair is also aware of the contents in this manual and follows the instructions each time they use the product Please retain these instructions with the product keeping them safely for future reference We advise you to make a photocopy in case they become lost or ask Kingkraft for a further copy Yours faithfully Kingkraft Customer Service Team CONTENTS 1 General Information 2 Overview component parts 3 Operation of the standard product 3 1 Locking the castors 3 2 Seat height 3 3 Seat angle 3 4 Inclined back rest 3 5 Seat depth 3 6 Back rest height 3 Knee angle 3 8 Foot support height 3 9 Arm rests 4 Use of the accessories 4 1 Head Support 4 2 Side bolsters 4 3 Folding Side bolsters 4 4 Hip bolsters seat width 4 5 Table 4 6 Knee abduction wedge 5 Cleaning and maintenance 6 Technical data 7 Guarantee details 1 General In
3. formation The Madita Fun Posture Chair is intended for use by children and young persons with reduced posture control who are unable to sit or stand unaided Attention e The product must not be used without supervision e The product must only be used on even or solid ground e The product must not be used to transport people e In order to assist with the transfer of the user into and out of the product the Carer must stand at the side of the chair and hold the seat support This ensures that all moving parts e g height adjustment remains unaltered 2 Overview component parts Important information When adjusting the locking screws or nuts please use the hexagonal key or spanner supplied with the chair These should be located with the user manual attached to the back of the chair An example of the Madita Fun Posture Chair Head Support Side Bolsters Back Rest qo BS Faj nju L fh Y pal SE legate A Arm Rests Backrest Angle at We oe Hip Bolsters Foot Pedel for M ea Height Adjustment 1i Seat Foot Support Rear Castors with Brakes Front Castor Base Frame 3 Operation of the standard product 3 1 Locking the castors The Posture Chair is parked by locking the two rear castors Foot operation of the brakes Releasing the brakes Brakes off Warning The brakes only operate correctly on even surfaces 3 2 Seat height adjustment Seat height adjustment is assisted by a ga
4. irmly again 4 6 Knee abduction wedge Height adjustment The height is adjusted by loosening the wing nut See arrow on the abduction wedge The wing should be retightened following adjustment Depth adjustment The depth is adjusted by loosening the nuts See arrows which are found under the seat see arrows Retighten the two nuts following adjustment Caution After making all adjustments tighten all the screws and nuts firmly again 5 Cleaning and maintenance The Posture Chair is designed to be relatively maintenance free All parts are corrosion resistant However under unfavourable conditions some slight rusting may occur If this happens it can be easily removed by simply wiping with polish and a soft cloth It is recommended that following a long period of use all nuts and bolts are checked for tightness Like every technical product the chair requires regular inspection Check the unit frequently for tears breakage holes or lost parts and or non functioning parts Remove the chair form normal use when it is clear it is not functioning correctly or safely Any machine washable covers WASH AT MAX 30 DEG C DRY GENTLY WHILST MAINATING THE SHAPE 6 Technical Data SeatHeight ShorBack 3 Seat Height Long Back 38 38 48 Adjustable Seat Height Max 45 45 55 Base Frame Width 56 56 66 Max load kg H aO Weight kg 30202 Castors 2 X double castors 2 X
5. locking double castors C CE Conformity This product conforms to the following guidelines 93 42 EWG for medical products Madita Fun Modification status B Issued 30 03 2009 schuchmann GmbH amp Co KG schuchmann Guarantee The Madita Fun Posture Chair with its accessories are guaranteed in the UK for a period of 12 months from the date of delivery against defects arising from faulty material inferior workmanship or construction The result of incorrect handling of the unit shall not be covered by the guarantee In line with the company s policy of continual product improvement we reserve the right to carry out improvements to the specification without notice Kingkraft 26D Orgreave Crescent Dore House Industrial Estate Sheffield S13 9NQ Tel 0114 269 0697 Fax 0114 269 5145 e mail info kingkraft co uk url www kingkraft co uk
6. remove the two nuts see arrows on the back of the back rest The height is adjusted by loosening the nuts and boltsand setting at the required height in the slotted holes see arrows in the backrest plate Caution After making all adjustments tighten all the screws firmly again 4 3 Folding Side Bolsters Push the red button above the joint to fold the bolsters to the side When folding back make sure there is an audible click as they engage in position 4 4 Hip bolsters seat width Height adjustment The height of the bolsters is adjusted by loosening the two bolts see arrow B When adjustment is complete the bolts should be retightened The bolsters with holders can be positioned at various heights on the arm rest see diagram Width angle adjustment seat width After loosening the cylindrical head bolts A see arrow the angle and width of the hip bolster can be adjusted seat width Caution After making all adjustments tighten all the screws firmly again 4 5 Use of table Table height This is adjusted by means of the arm rests Depth adjustment To alter the distance of the table form the user the winged locking nuts see arrow should be loosened Retighten the wing nuts after adjustment Folding To fold the table for example when the user is being positioned in the chair it is simply swung upwards to one side Caution After making all adjustments tighten all the screws f
7. s spring To raise the seat height operate the foot pedal arrowed With slight assistance the seat will raise To lower the seat depress the pedal and at the same time push down on the seat The foot pedal can also be locked in position to prevent unwanted movement by means of the locking pin which is to be found on the inner side of the foot pedal Turn the locking pin until it engages slight movement of the foot pedal will help it to engage To unlock the pin pull it outwards and turn through a quarter turn Attention Please be careful not to trap any body part feet in the area of the adjustment mechanism between the floor and the foot plate 3 3 Seat angle adjustment In order to adjust the seat angle the hand release lever should be pulled upwards The seat unit can then be moved into the Active or Passive position The locking bracket should be hinged down and the lever engaged to avoid it being unintentionally adjusted when in use Hand Release Lever 3 4 Inclined back rest The angle of the back rest can be adjusted by operating the clamp handle see arrow When adjusted retighten the clamp handle Caution After making all adjustments tighten all the screws firmly again 3 5 Seat Depth Adjustment of the seat depth is done by loosening the two socket head bolts See arrow which are on the side of the chair When the seat is in the desired position the bolts should be retightened Ca
8. ution After making all adjustments tighten all the screws firmly again 3 6 Back rest height To adjust the height of the back rest the two locking wheels behind the back rest see arrows should be loosened When the back rest is in the desired position the locking wheels should be retightened Caution After making all adjustments tighten all the screws firmly again 3 Knee angle adjustment The knee angle adjustment has a ratchet mechanism which allows for adjustment in small steps To adjust the angle both locking wheels see arrow must be loosened When the required position is achieved the locking wheels should be retightened Caution After making all adjustments tighten all the screws firmly again 3 8 Foot support height The foot support height can be adjusted To do this loosen both socket head screws see arrows on the rear side of the foot support When the required position is reached the screws should be retightened Caution After making all adjustments tighten all the screws firmly again Attention Please take care during adjustment that no body parts feet are in the area of the adjustment mechanism between the foot rest and the base frame 3 9 Arm rests Arm rest height adjustment The two arm rests are adjusted by loosening the locking wheels see arrow B on the arm rests left and right When in the required position the locking wheels should be retightened
Download Pdf Manuals
Related Search