User`s Manual - Block Lighting
Contents
1. User s Manual Pocket InfraRed Thermometer Model 59114 Introduction This device allows the user to take non contact temperature measurements simply by pointing the meter and pressing a button This meter with proper care will provide years of safe reliable service Specifications General Specifications Display 3 digit 2000 count LCD display ee Temperature 30 to270 C 22 to 518 F Range Specifications Ranges Resolution 30 to 270 C 22 to 518 F 1 C 1 F Accuracy 30 to 270 C 22 to 518 F 2 5 of reading 2 C 4 F 1 Accuracy is given at 18 C to 28 C 64 F to 82 F Power off Automatic shutoff after approx 7 8 seconds Laser power Laser power less than 1mW red Operating Temperature 32 to 122 F 0 to 50 C Accuracy notes less than 80 RH 2 Accuracy specified for emissivity of 0 95 Emissivity settings Distance Factor Operating Humidity Max 80 RH Power Supply 2 x AAA battery 97 x 57 x 29 mm IR Measurements Taking Measurements Distance to Target Point the meter toward the object being measured then press and hold the MEASURE button The meter and Laser will turn ON and take a reading Read the measured temperature on the LCD The meter and Laser turn off automatically approximately 8 seconds after the MEASURE button is released The object being measured should be larger than the spot size as illustrated at right Distance D to Spot Sizes Measurement consideratio2. artment 1 Laser pointer beam 2 Backlight key 3 LCD display 4 Hand Strap 5 IR sensor 6 TA
3. ns If the surface of an object to be ee 6 1 measured is covered with frost dust or other materials surface cleaning must be performed before accurate measurements can Sa be made High Reflective Surfaces If the surface of an object to D S 6 1 15025 300050 00100 mm be measured is highly reflective apply masking tape or apply flat black paint to the surface since black paint has a fixed emissivity value Backlighting function Press the key to turn on the LCD backlighting function The backlight turns off automatically approximately 8 seconds after the BACKLIGHT button is released 24 4 Inch p Sensor Beam Displaying F or C Open the battery compartment move the slide switch located in the opening beneath the outermost battery Battery Replacement A flashing display indicates that the AAA batteries which power the meter have weakened Open the battery compartment on the rear of the meter replace the batteries and close the compartment CAUTION Do not directly view or direct the laser pointer at an eye Low power visible lasers do not normally present a hazard but may present some potential for hazard if viewed directly for extended periods of time LASER RADIATION DO NOT STARE INTO BEAM DIODE LASER lt 1mW Output at 675nm CLASS II LASER PRODUCT FRONT PANEL DESCIPTION Measuring amp Laser key C or F select key need open Battery compartment 8 Battery comp
Download Pdf Manuals
Related Search