Product Manual
Contents
1. PROFESSIONAL AUDIO EQUIPMENT Built in Ceiling or Wall Speaker CS55 User Manual amp Installation Guide AUDAC PROFESSIONAL AUDIO EQUIPMENT User Manual amp Installation Guide AUDAC http www audac eu info audac eu Before connecting or installing this product first read these instructions carefully Warning e Use only the correct amplifier output voltage and impedance exceeding these limits could cause fire or other failures e Avoid explosions do not use the speaker around gasoline thinner or other combustibles e Only install the speaker in locations that can structurally support the weight of the speaker Not doing this may result in the speaker falling down e Do not use any other method than specified to mount the speaker If extreme force is applied to the speaker it could fall down e Attach a safety wire to the speaker when it is mounted high above the ground Failure in doing so could cause the speaker to fall down for any reason e Avoid mounting the speaker in locations exposed to constant vibrations The mounting points can be damaged by excessive vibration potentially causing the speaker to fall down Caution e Avoid electric shocks switch off the amplifier power when connecting the speaker e Avoid installing the speaker in locations exposed to solvents acids smoke and heaters as excessive exposute to these factors could result in speaker failure fire or electric shock e Do not operate t2. 100 8 dB 8 Ohm 1600 Ohm 6W 3300 Ohm 3W 6600 Ohm 1 5W Fo 14kHz Fo 16kHz 205x70 mm 165 mm 0 70 Kg 4 Screws with clamp White RAL9010
3. he speaker for an extended period of time at distorted sound This could cause irreparable damage to the speaker e Do not stand or sit on nor hang down from the speaker as this may cause failure of the speaker Installation e Make a hole with a diameter of 165mm This is very easy when you use the carton that is inside of the box e Take the grille from the speaker and put the speaker in the hole e Tighten the screws of the speaker so that the speaker will be clasped on the ceiling or wall e Inside of the box you can find gums Put these gums on the sides of the grille Then put the grille on the speaker The gums on the sides of the grille will prevent the grille from falling down Connections Impedance e Plug the speaker cable into the socket at the back of the speaker Make sure to match the impedance Always plug one cable into the common socket and the other cable into the socket of the desired power tapping Cable e Be sure that you use the following polarities for your speaker cable when using several speakers in the same location Red Negative or common Black Positive e The total rated input of all connected speakers may not exceed the amplifiers output Specifications Nominal Power SPL 1W 1m SPL 20W 1m Impedance Line transformer impedance Frequency Response 3dB Frequency Response 10 dB Dimensions Diameter x Depth Cut out Diameter Weight Mounting Color 10 Watt 93 dB
Download Pdf Manuals
Related Search