NJ-PA_E.fm Data Sheet
Contents
1. 8 I md T en l Leg Connector DC input d E H tts LG S e GR o o RUN output uel D DI f Pe uc AC Input Supply 100 to 240 VAC allowable 85 to 264 VAC The NJ PA3001 has a wide input range so it does not have voltage switching terminals DC Input Supply 24 VDC allowable 19 2 to 28 8 VDC LG Ground to a resistance of 100 or less to increase noise resistance and avoid electric shock GR Ground to a resistance of 100 Q or less to avoid electric shock RUN Output The internal contacts for the RUN output turn ON when the CPU Unit is in RUN status omnon NJ PA PD Wiring About Power Supply For AC DC power supply Recommended wire AWG 14 to 20 diameter Cross section 0 517 to 2 08 mm For grounding wire Recommended wire 2 mm or thicker diameter eCrimp Terminals The terminals on the Power Supply Unit are M4 self raising terminals with screws Crimp Terminals for AC Power Supplies 7 mm max Crimp Terminals for DC Power Supplies 7 mm max DH 7 mm max Crimp terminal for the grounding wire 7mm max DH 7 mm max Precautions for Use Compatible CPU Models NJ PA3001 NJ PD3001 are dedicated for NJ series Please make sure to use NJ PA3001 NJ PD3001 for all products including NJ series CPU rack and expansion rack Power Supply Units Current Consumption Checking Current Consumption and Power Consumption After selecting a Power Supply Uni2. all amounts including amounts payable hereunder whether or not then due which are owing to it by Buyer Buyer shall in any event remain liable for all unpaid accounts Cancellation Etc Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses Force Majeure Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control including earthquakes fires floods strikes or other labor disputes shortage of labor or materials accidents to machinery acts of sabotage riots delay in or lack of transportation or the requirements of any government authority Shipping Delivery Unless otherwise expressly agreed in writing by Omron a Shipments shall be by a carrier selected by Omron Omron will not drop ship except in break down situations b Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer c All sales and shipments of Products shall be FOB shipping point unless oth erwise stated in writing by Omron at which point title and risk of loss shall pass from Omron to Buyer provided that Omron shall retain a security inter est in the Products until the full purchase price is paid d Delivery and shipping dates are estimates only and e Omron will package Products as it deems proper for protection against nor mal handling and extra charges apply
3. series Power Supply Unit Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products Other company names and product names in this document are the trademarks or registered trademarks of their respective companies omnon NJ PA PD General Specification Item Model Supply voltage Operating voltage and frequency ranges Power consumption Inrush current 1 Output capacity 2 Output terminal service supply RUN output 3 Replacement notification function Insulation resistance 4 Dielectric strength 4 5 Noise immunity Vibration resistance Shock resistance Ambient operating temperature Ambient operating humidity Atmosphere Ambient storage temperature Grounding Enclosure Weight CPU Rack dimensions Safety measures Specifications NJ PA3001 NJ PD3001 100 to 240 VAC wide range 50 60 Hz 24 VDC 85 to 264 VAC 47 to 63 Hz 19 2 to 28 8 VDC 120 VA max 60 W max At 24 VDC 30 A 20 ms max for cold start At 100 VAC 20 A 8 ms max for cold start at room temperature At 200 VAC 40 A 8 ms max for cold start at room temperature 5 VDC 6 0 A including supply to CPU Unit using CPU Rack 5 VDC 6 0 A using Expansion Rack 24 VDC 1 0A Total 30 W max Not provided Contact configuration SPST NO Switch capacity 250 VAC 2 A resistive load 120 VAC 0 5 A inductive load 24 VDC 2A resi
4. shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities losses claims costs and expenses including attorney s fees and expenses related to any claim inves tigation litigation or proceeding whether or not Omron is a party which arises or is alleged to arise from Buyers acts or omissions under these Terms or in any way with respect to the Products Without limiting the foregoing Buyer at its own expense shall indemnify and hold harmless Omron and defend or set tle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party Property Confidentiality Any intellectual property in the Products is the exclu sive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron Notwithstanding any charges to Buyer for engineering or tooling all engineering and tooling shall remain the exclusive property of Omron All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party Export Controls Buyer shall comply with all applicable laws regulations and licenses regarding i export of products or information iii sale of products to forbidden or other pro
5. x 24V O vale Including supply to the CPU Unit omnon NJ PA PD Example Calculating Total Current and Power Consumption Example When the Following Units are Mounted to a NJ Series CPU Rack Using a NJ PA3001 Power Supply Unit Voltage group Unit type Quantity owa 2 09A S i Current consumption 1 9 A 0 02 A 0 08 A x Total 2 0 09 A x 2 0 09 A x 0 048 A x2 240 12 A 0 28 24 A 60A 01096 A 10A 142W 23W 65W 90W Using the Sysmac Studio to Display Current Consumption and Width CPU Rack and Expansion Rack current consumption and width can be displayed by selecting CPU Expansion Racks from the Configurations and Setup in the Multiview Explorer If the capacity of the Power Supply Unit is exceeded an error icon is displayed in the power supply unit of a corresponding rack For details refer to Symac Studio Version 1 Operation manual W504 lt a Po pel rpo s 2 O gt co 2 omnon NJ PA PD Dimensions Unit mm NJ PA3001 PA3001 NJ PD3001 PD3001 Related Manuals Manual name Model numbers Application Description NJ series CPU Unit W500 Learning the basic An introduction to the entire NJ series system is Hardware User s Manual specifications of the NJ series provided along with the following information on CPU Units including a Controller built wi
6. ESS THE RISKS AND THAT THE OMRON S PRODUCT IS PROP ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM Programmable Products Omron Companies shall not be responsible for the user s programming of a programmable Product or any consequence thereof Performance Data Data presented in Omron Company websites catalogs and other materials is provided as a guide for the user in determining suitabil ity and does not constitute a warranty It may represent the result of Omron s test conditions and the user must correlate it to actual application require ments Actual performance is subject to the Omron s Warranty and Limitations of Liability Change in Specifications Product specifications and accessories may be changed at any time based on improvements and other reasons It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made However some specifica tions of the Product may be changed without any notice When in doubt spe cial part numbers may be assigned to fix or establish key specifications for your application Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product Errors and Omissions Information presented by Omron Companies has been checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or o
7. NJ Series Power Supply Unit NJ PA PD Powerful power supply unit to supply stable power to the NJ series controller CSM_NJ PA_PD_DS_E_1_1 Stable power supply is available from the NJ series CPU Unit to each I O Unit via the dedicated bus Lineups are provided for AC and DC input types with 30 W output NJ PD3001 Features e AC input type 100 to 240 VAC DC input type 24 VDC with 30 W output allows power supply to large scale configurations e Operating output contact indicates the CPU operation status available in all models Ordering Information International Standards e The standards are abbreviated as follows U UL U1 UL Class Division 2 Products for Hazardous Locations C CSA UC cULus UC1 cULus Class Division 2 Products for Hazardous Locations CU cUL N NK L Lloyd and CE EC Directives e Contact your OMRON representative for further details and applicable conditions for these standards Power Supply Units Output Output current capacity Power Product Name supply 24 VDC Maintenance Standards voltage Total power service consumption ower bens capacity capacity P SUDO monitor AC Power Supply Unit DC Power Supply Unit 1 hu to 240 V hu Poma PA3001 24 VDC NJ PD3001 Note Power supply units for the CJ Series cannot be used as a power supply for a CPU rack of the NJ system or as a power supply for an expansion rack Accessories There is no accessory for the NJ
8. f i the invoice is paid according to Omron s payment terms and ii Buyer has no past due amounts Interest Omron at its option may charge Buyer 1 1 2 interest per month or the maximum legal rate whichever is less on any balance not paid within the stated terms Orders Omron will accept no order less than 200 net billing Governmental Approvals Buyer shall be responsible for and shall bear all costs involved in obtaining any government approvals required for the impor tation or sale of the Products Taxes All taxes duties and other governmental charges other than general real property and income taxes including any interest or penalties thereon imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture production sale delivery importa tion consumption or use of the Products sold hereunder including customs duties and sales excise use turnover and license taxes shall be charged to and remitted by Buyer to Omron Financial If the financial position of Buyer at any time becomes unsatisfactory to Omron Omron reserves the right to stop shipments or require satisfactory security or payment in advance If Buyer fails to make payment or otherwise comply with these Terms or any related agreement Omron may without liabil ity and in addition to other remedies cancel any unshipped portion of Prod ucts sold hereunder and stop any Products in transit until Buyer pays
9. g Product or iii repay or credit Buyer an amount equal to the purchase price of the non complying Product provided that in no event shall Omron be responsi ble for warranty repair indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were prop erly handled stored installed and maintained and not subject to contamina tion abuse misuse or inappropriate modification Return of any Products by Buyer must be approved in writing by Omron before shipment Omron Compa nies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components circuits system assemblies or any other materials or substances or environ ments Any advice recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty See http www omron247 com or contact your Omron representative for pub lished information Limitation on Liability Etc OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED IN CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY Further in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted Indemnities Buyer
10. ion or use of the Product At Buyer s request Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product This information by itself is not sufficient for a complete determination of the suitability of the Prod uct in combination with the end product machine system or other application or use Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application product or system Buyer shall take application responsibility in all cases but the following is a non exhaustive list of applications for which particular attention must be given i Outdoor use uses involving potential chemical contamination or electrical interference or conditions or uses not described in this document ii Use in consumer products or any use in significant quantities iii Energy control systems combustion systems railroad systems aviation systems medical equipment amusement machines vehicles safety equip ment and installations subject to separate industry or government regulations iv Systems machines and equipment that could present a risk to life or prop erty Please know and observe all prohibitions of use applicable to this Prod uct NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDR
11. l not be sufficiently cool and the inrush current given in the table may be exceeded by up to twice the given value The DC inrush control circuit uses a capacitor charging delay circuit If the power is OFF for only a short time for a hot start the capacitor will not sufficiently discharge and the inrush current given in the table may be exceeded by up to twice the given value An inrush current of approximately 4 A may occur and continue for 1 s when the power is turned ON When selecting fuses breakers and external DC power supply devices for external circuits allow sufficient margin in shut off performance 2 Internal components in the Power Supply Unit will deteriorate or be damaged if the Power Supply Unit is used for an extended period of time exceeding the power supply output capacity or if the outputs are shorted 3 Supported only when mounted to CPU Rack 4 The tests can also be performed with the LG terminal and GR terminal connected to each other 5 Change the applied voltage gradually using the adjuster on the Tester If the full dielectric strength voltage is applied or turned OFF using the switch on the Tester the generated impulse voltage may damage the Power Supply Unit omnon NJ PA PD External Interface NJ PA3001 PA3001 POWER Indicator PWR LED AC input nm Connector GR pigg RUN output NJ PD3001 PD3001 POWER Indicator PWR LED DC input
12. missions OMRON AUTOMATION amp SAFETY OMRON INDUSTRIAL AUTOMATION THE AMERICAS HEADQUARTERS Schaumburg IL USA e 847 843 7900 800 556 6766 www omron24 7 com OMRON CANADA INC HEAD OFFICE OMRON ARGENTINA SALES OFFICE Toronto ON Canada 416 286 6465 e 866 986 6766 www omron24T com Cono Sur e 54 11 4783 5300 OMRON ELECTRONICS DE MEXICO HEAD OFFICE OMRON CHILE SALES OFFICE M xico DF 52 55 59 01 43 00 001 800 556 6766 mela omron com Santiago e 56 9 9917 3920 OMRON ELECTRONICS DE MEXICO SALES OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca N L e 52 81 11 56 99 20 e 001 800 556 6766 mela omron com 54 11 4783 5300 OMRON ELETR NICA DO BRASIL LTDA HEAD OFFICE Sao Paulo SP Brasil e 55 11 2101 6300 www omron com br OMRON EUROPE B V Wegalaan 67 69 NL2132 JD Hoofddorp The Netherlands e Tel 31 0 23 568 13 OO Fax 31 0 23 568 13 88 www industrial omron eu Cat No CSM NJ PA PD DS E 1 1 10 11 Note Specifications are subject to change 2013 Omron Electronics LLC Printed in U S A
13. scribed persons and ii disclosure to non citizens of regulated technology or information Miscellaneous a Waiver No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron b Assignment Buyer may not assign its rights hereunder without Omron s written consent c Law These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products without regard to conflict of law princi ples d Amendment These Terms constitute the entire agreement between Buyer and Omron relating to the Products and no provision may be changed or waived unless in writing signed by the parties e Severability If any provi sion hereof is rendered ineffective or invalid such provision shall not invalidate any other provision f Setoff Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice g Definitions As used herein including means including without limitation and Omron Compa nies or similar words mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof Certain Precautions on Specifications and Use 1 Suitability of Use Omron Companies shall not be responsible for conformity with any standards codes or regulations which apply to the combination of the Product in the Buyers applicat
14. stive load Not provided 20 MO min at 500 VDC between AC external and GR terminals 2 300 VAC 50 60 Hz for 1 min between AC external and GR 20 MQ min at 500 VDC between DC external and GR terminals 1 000 VAC 50 60 Hz for 1 min between DC external and GR terminals Leakage current 10 mA max terminals Leakage current 10 mA max 2 kV on power supply line Conforms to IEC 61000 4 4 5 to 8 4 Hz 3 5 mm amplitude 8 4 to 150 Hz acceleration 9 8 m s in X Y and Z directions for 100 min Time coefficient 10 min x coefficient factor 10 total time 100 min according to IEC 60068 2 6 147 m s 3 times each in X Y and Z directions Relay Output Unit 100 m s according to IEC 60068 2 27 0 to 55 C 10 to 90 with no condensation Must be free from corrosive gases 20 to 75 C Less than 100 O Mounted in panel 470 g max 490 g max 174 7 to 484 7 x 90 x 90 mm W x D x H not including cables W 70 Power Supply Unit 90 CPU Unit 20 x n 31 x m 14 7 end cover n is the number of 32 point I O Units or I O Control Units and m is the number of other Units Conforms to cULus EC Directives NK and LR 1 The AC and DC values above are given for a cold start and the AC values are at room temperature The AC inrush control circuit uses a thermistor element with a low temperature current control characteristic If the ambient temperature is high or the Controller is hot started the thermistor wil
15. t based on considerations such as the power supply voltage calculate the current and power requirements for each Rack Condition 1 Current Requirements There are two voltage groups for internal power consumption 5 V and 24 V Current consumption at 5 V internal logic power supply Current consumption at 24 V relay driving power supply Condition 2 Power Requirements For each Rack the upper limits are determined for the current and power that can be provided to the mounted Units Design the system so that the total current consumption for all the mounted Units does not exceed the maximum total power or the maximum current supplied for the voltage groups shown in the following tables The maximum current and total power supplied for CPU Racks and Expansion Racks according to the Power Supply Unit model are shown below Note 1 For CPU Racks include the CPU Unit current and power consumption in the calculations When expanding also include the current and power consumption of the I O Control Unit in the calculations 2 For Expansion Racks include the I O Interface Unit current and power consumption in the calculations Max current supplied C Conditions 1 and 2 below must be satisfied ota A 5 VDC Max total Condition 1 Maximum Current u a i ed A Y Mae CPU Expansion B 24 VDC power 1 Total Unit current consumption at 5 V lt A value Rack supplied 2 Total Unit current consumption at 24 V lt B value eoo sow 0xSV
16. th an NJ501 CPU Unit introductory information e Features and system configuration designing installation and e Introduction maintenance Mainly e Part names and functions hardware information is e General specifications provided e Installation and wiring e Maintenance and inspection Use this manual together with the NJ series CPU Unit Software User s Manual Cat No W501 omnon Terms and Conditions of Sale OMRON 12 Offer Acceptance These terms and conditions these Terms are deemed part of all quotes agreements purchase orders acknowledgments price lists catalogs manuals brochures and other documents whether electronic or in writing relating to the sale of products or services collectively the Products by Omron Electronics LLC and its subsidiary companies Omron Omron objects to any terms or conditions proposed in Buyer s purchase order or other documents which are inconsistent with or in addition to these Terms Prices Payment Terms All prices stated are current subject to change with out notice by Omron Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders Payments for Products are due net 30 days unless otherwise stated in the invoice Discounts Cash discounts if any will apply only on the net amount of invoices sent to Buyer after deducting transportation charges taxes and duties and will be allowed only i
17. to special conditions Claims Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original trans portation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed Warranties a Exclusive Warranty Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron or such other period expressed in writing by Omron Omron disclaims all other warranties express or implied b Limitations OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED ABOUT NON INFRINGEMENT MERCHANTABIL 14 15 16 17 18 ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or oth erwise of any intellectual property right c Buyer Remedy Omron s sole obli gation hereunder shall be at Omron s election to i replace in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof the non complying Product ii repair the non complyin
Download Pdf Manuals
Related Search