User manual
Contents
1. amp TTE directive 1999 5 EC Disposal of your old product and battery ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused H This symbol on a product means that the product is covered by European Directive 2012 19 EU A This symbol means that the product contains a built in rechargeable battery covered by European Directive 2013 56 EU which cannot be disposed of with normal household waste We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery Inform yourself about the local separate collection system for electrical and electronic 10 EN products and rechargeable batteries Follow local rules and never dispose of the product and rechargeable batteries with normal household waste Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health Remove the integrated battery Note e Make sure the headset is disconnected from the USB charging cable before removing the battery If there is no collection recycling system for electronic products in your country you can protect the environment by removing and recycling the battery before disposing the headset Compliance with EMF This product complies with all applicable standards a2. detailed information refer to he user manual of your mobile phone Note Make sure your mobile phone has the NFC feature available and switched on Make sure your mobile phone is not in standby mode Pairing with NFC is only suitable for Android mobile operating system 4 2 or above Refer to the user manual of your mobile phone to identify its NFC detection area EN 5 The following example shows you how to pair the headphones with your mobile phone 1 Activate the Bluetooth feature of your mobile phone select Philips SHB7250 2 Enter the headset password 0000 4 zeros if prompted For those mobile phones featuring Bluetooth 3 0 or higher no need to enter a password Add Philips SHB7250 Enter Password Bluetooth device 0000 4 Use your headphones Connect the headphones to a Bluetooth device 1 Tumon your mobile phone Bluetooth device 2 Press and hold to turn the headset on L gt The blue LED flashes L gt The headset is reconnected to the last connected mobile phone Bluetooth device automatically EJ e If you turn on the mobile phone Bluetooth device or activate the Bluetooth feature after turning on the headset you have to reconnect the headset and mobile phone Bluetooth device manually e If your mobile phone Bluetooth device cannot reconnect automatically try to reconnect manually by clicking the headphones name again under the Bluetooth setting manual on your mobile
3. phone Bluetooth device Note Ifthe headset fails to connect to any Bluetooth device within range in 5 minutes it will switch off automatically to save the battery life Manage your calls and music On off Task Button Operation Turn the Y Press and hold for 2 headphones seconds on Turn the 0 Press and hold for 4 headphones seconds off L gt The white LED is on and fades out Music control Task Button Operation Play or pause Ca Press once music Adjust Volume trac Press once volume control or press and VOL hold Skip forward Volumef trac Press once control gt Skip Volume trac Press twice backward control Enable disable EQ Press twice equalizer Call control Task Button Operation Pick up hang up C Press once a call da gt besa Reject an Ci Press and hold incoming call for 2 seconds gt 1 beep Switch caller Volume Press once during a call track gt 1 beep control Mute unmute the Press once microphone in L gt 1 beep a call Voice control Task Button Operation Siri Google Now Press once EN 7 Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device while the headphones in standby mode or while you are listening to music Tip Indicator After use twist the headphones for easy storage The blu
4. Always there to help you Register your product a T upport at www philips com suppor a Question Contact SHB7250 Philips User manual PHILIPS Contents 1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth wireless headphones 3 What s in the box 3 Other devices 3 Overview of your Bluetooth wireless headphones 3 3 Get started 5 Charge your headphones 5 Pair the headphones with your mobile phone 5 4 Use your headphones 7 Connect the headphones to a Bluetooth device 7 Manage your calls and music 7 Wear your headset 8 5 Technical data 9 6 Notice 10 Declaration of conformity 10 Disposal of your old product and battery 10 Compliance with EMF 10 Trademarks 11 7 Frequently asked questions 12 EN 1 Important safety instructions Hearing Safety Danger To avoid hearing damage limit the time you use headphones at high volume and set the volume to a safe level The louder the volume the shorter the safe listening time is Be sure to observe the following guidelines when using your headset e Listen at reasonable volumes for reasonable periods of time e Be careful not to adjust the volume continuously upwards as your hearing adapts Do not turn up the volume so high that you can t hear what s around you You should use caution or temporarily discontinue use in potentially hazardous situations Excessive sound pr
5. Bluetooth device e g play pause skip forward backward Make sure the Bluetooth audio source supports AVRCP see Technical data on page 9 My headset does not work when the audio cable is connected Microphone function will be deactivated if a 3 5mm audio cable is connected to the headset In such case your headset is only for music enjoyment After using Google Now music starts playing through the mobile phone speaker instead of headphones but Bluetooth is still connected what can do Press the Siri Google now button again music will resume playing from the headphones How can restore all original headphones settings When the headphones are powered on and is not connected to the USB cable press and hold and Y for 5 seconds until you see the white LED flashes 5 times For further support visit www philips com support EN 13 PHILIPS 20150 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used C 0890 by WOOX Innovations Limited under license from Koninklijke Philips N V UM_SHB7250_00_EN_V1 0 2 wk1452
6. e LED flashes for every 8 seconds The headphones are ready for pairing The LED flashes blue and white alternately The headphones are on but not connected to a Bluetooth device The blue LED flashes quickly Low battery The white LED flashes 3 times for every 10 seconds until it is out of power Battery is fully charged White LED is off Wear your headset Wi k Adjust the headband to fit your head m Z 5 Technical data e 11 hours of music time or talk time e 200 hours of standby time Normal time for a full charge 2 hours e Rechargeable Lithium Polymer battery 200 mAh e 3 5 mm audio jack for corded headphones mode e Bluetooth 4 0 Bluetooth mono support Headphones Profile HSP Hands Free Advanced Audio Distribution Profile A2DP Audio Video Remote Control Profile AVRCP e Operating range Up to 10 meters 33 feet e Digital echo amp noise reduction Auto power off Note Profile HFP Bluetooth stereo supported e Specifications are subject to change without notice EN 6 Notice Declaration of conformity Hereby WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC You can find the Declaration of Conformity on www p4c philips com This product has been designed tested and manufactured according the European R
7. e headphones are fully charged Tip e Normally a full charge takes 2 hours When your battery is empty you can carry on listening music with an audio cable Make sure the headphone are off and not in idle mode before using this audio cable Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the first time pair it with a mobile phone A successful pairing establishes a unique encrypted link between the headphones and mobile phone The headphones store the last 4 devices in the memory If you try to pair more than 4 devices the earliest palred device is replaced by the new one There are two ways to pair your headphones with your mobile phone Manual pairing NFC pairing Manual pairing 1 2 Make sure that the headphones are fully charged Press and hold to turn the headphones on Press and hold until the blue and white LED flashes alternately Turn on the Bluetooth function of your mobile phone L gt The headphones are in pairing mode for 2 minutes Pair the headphones with the mobile phone For detailed information refer to the user manual of your mobile phone NFC pairing 1 Make sure you turn on the NFC function on your phone and your phone s screen remains active Place your phone over the headset so that he NFC detection area of each device can ouch each other Pair the headphones with the mobile phone For
8. ely before you release Do not stop holding the button if you see he blue LED only The mobile phone cannot find the headphones e The headphones may be connected to a previously paired device Turn off the connected device or move it out of range e Pairing may have been reset or the headphones have been previously paired with another device Pair the headphones with the mobile phone again as described in the user manual see Pair the headphones with your mobile phone on page 5 Voice dialing or redialing does not work on my mobile phone Your mobile phone may not support this feature 12 EN The other side cannot hear me on the mobile phone The microphone is muted Press once to enable the microphone My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone but music only plays on the mobile phone speaker Refer to the user manual of your mobile phone Select to listen to music through the headphones The audio quality is poor and crackling noise can be heard The Bluetooth device is out of range Reduce the distance between your headphones and Bluetooth device or remove obstacles between them The audio quality is poor when streaming from the mobile phone is very slow or audio streaming does not work at all Make sure your mobile phone not only supports mono HSP HFP but also supports A2DP see Technical data on page 9 hear but cannot control music on my
9. essure from earphones and headphones can cause hearing loss Using headphones with both ears covered while driving is not recommended and may be illegal in some areas while driving e For your safety avoid distractions from music or phone calls while in traffic or other potentially dangerous environments General information To avoid damage or malfunction pg Caution Do not expose headphones to excessive heat Do not drop your headphones Headphones shall not be exposed to dripping or splashing Do not allow your headphones to be submerged in water Do not use any cleaning agents containing alcohol ammonia benzene or abrasives If cleaning is required use a soft cloth if necessary dampened with a minimum amount of water or diluted mild soap to clean the product The integrated battery shall not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type About operating and storage temperatures and humidity e Operate or store in a place where temperature is between 15 C 5 F and 55 C 131 F up to 90 relative humidity e Battery life may be shorter in high or low temperature conditions 2 Your Bluetooth wireless headphones Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product a
10. nd regulations regarding exposure to electromagnetic fields Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by WOOX Innovations Limited is under license Siri is a trademark of Apple Inc registered in the U S and other countries Google Google and the Google Logo are registered trademarks of Google Inc EN 11 7 Frequently asked questions My Bluetooth headphones do not switch on The battery level is low Charge the headphones cannot pair my Bluetooth headphones with a mobile phone The Bluetooth is disabled Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones Pairing does not work Make sure the headphones are in pairing mode e Follow the steps described in this user manual see Pair the headphones with your mobile phone on page 5 ake sure that the LED light flashes blue and white alternat
11. t www philips com welcome With this Philips wireless on ear headphones you can e enjoy convenient wireless handsfree calls e enjoy and control wireless music e switch between calls and music e enjoy music on non Bluetooth devices with an audio cable What s in the box Philips Bluetooth wireless headphones SHB7250 USB charging cable Audio cable Quick start guide Other devices A mobile phone or device e g notebook PDA Bluetooth adapters MP3 players etc which supports Bluetooth and is compatible to the headphones Overview of your Bluetooth wireless headphones PHILIPS N 0000 Q O Pi Music Call control button LED indicator 0 O Power button O Microphone O 9Q lt Pairing Equalizer Mute button Micro USB charging slot Volume Track control NFC detection area O Audio jack 3 Get started Charge your headphones E e Before you use your headphones for the first time charge the battery for 5 hours for optimum battery capacity and lifetime Use only the original USB charging cable to avoid any damage e Finish your call before charging the headphones as connecting the headphones for charging will power the headphones off Connect the supplied USB charging cable to e the USB connector of the headphones and e USB power source gt LED turns white during charging and turns off when th
Download Pdf Manuals
Related Search