Skypatrol Evolution - TT8740AT001 - AT Commands
Contents
1. MSGSND 0 3 ASCII DATA OK N A N A N A N A AT MSGSND lt destination gt lt data gt OK 0 3 possible Valid Values O lt data gt is sent out the serial port 1 lt data gt is sent to all SMS addresses listed in AT SMSDA command 2 lt data gt is sent via GPRS to first IP address configured as server in AT FRIEND command and port number defined by AT UDPAPI command 3 lt data gt is sent via GPRS to IP address and Port number listed in the AT PADDST command a maximum of 50 bytes ASCII characters Page 52 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 21 MSGSND Message Send continued Reference Standard Scope Implementation Scope Notes AT MSGSND command can be sent to the MTG via SMS UDP API or serial port TT8740AN001 1 09a Page 53 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 21 Odometer ODOMETER MT Trip Odometer Command Function The 0DOMETER command records how far the vehicle has traveled in one trip The user can reset the odometer at the beginning of a new trip Command Functional Group Command Format Query ATSODOMETER Response SODOMETER 0 4000000000 Write Format ATSODOMETER 1234 where 1234 is distance in meters Response oK Read Format ATSODOMETER Response SODOMETER xxxx xxxx distance traveled2. 1 3 COMMAND SYNTAX ai aia 1 4 REVISION HISTORY cccssssecscesecscesssssesccesecccseeessnsceecescesesesenseseeeseesesensnsaaeeeseceens 2 ALCOMIANDS a aa 2 1 AUTOMATIC PIG RESE Tis adidas 2 2 DELETE A RANGE OF EVENT GROUPS cccccccesesssssccececcescesssnsececesecsesesentsaeeeseseens 2 3 DELETE A RANGE OF GEO FENCES ccccccssesccessessssecseesecsesessnseceeesecsceesensseeeseeeens 2 4 PVEN a Oa sR OBEN ROR REE 2 5 EVENT QUERY A E AA A T A a a E T eA 2 6 EVENT COUNTER sui an AE R 2 7 GEO FENGING reae SGA a IT EE 2 8 GEOFENCE DEBOUNCE cccccccccsccscssssssseeesecccsceessnseceeesecsesesessaeeeeescesesensnseaeeeseceens 2 9 GPS LOCAL SUBSGRIPTIONssiisccecsssteisvenccsrescdalesedad sas QAO GPS ODOMETER stu seks aar a A aed Be lin tei dret 2 11 GPS OVERSPEED INTERVAL cccccccccccsssessssececesccsceesessaecesececseeesssseeeeescesesenenteaeess 2 42 GPS QUALITY FILTERS SAN Z1 GPS READ At ie 2 14 IGNIHONDEBOUNCE o scciisce3ejscececccas sveiss erent dies sdausvessesathses a n a ZE WONDEBOUNEC Biosoc a a 2 16 MESSAGE LOG CLEAR occococccnnnnonononnnconononnnnononononcononannnonnnnnonnononnno nn nnncocononnnonononos 21 77 MESSAGE LOG DUMP iii ts 2 18 MESSAGE LOG ENABLE cc 2 19 MESSAGE LOG READ DATA oocooooocnnonccconononnononononccnonannnononononnononnnno no nnncncononannnnononos 220 MESSAGE SEND ad SE E Ei lia PAIA ODOMETER iio 222a POWER SAVE Add tit 2 23 REAL TIME COCK ALARM si a OS SE dessa 2 24 REMOTE
3. lt fix type gt lt HDOP OK AT GPSQUAL GPSQUAL lt fix type gt lt HDOP level gt N A O default consider GPS data valid if GPGSA fix is either 2D GPS fix 2 or 3D Differential GPS fix 3 consider GPS data valid only if GPGSA fix is 3D Differential GPS fix 3 O default do not use HDOP value from GPGSA sentence when determining whether GPS is valid 1 255 consider GPS data valid only if HDOP value from GPGSA sentence is less than or equal to indicated this HDOP limit Page 38 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 12 GPSQUAL GPS Quality Filters continued Reference N A Standard Scope Optional Implementation Scope Full Notes TT8740AN001 1 09a Page 39 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 13GPS Read GPSRD Read current GPS ASCII data Command Function This command allows a user to read Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt nmeaMsgs gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC current NMEA format GPS data SkyPatrol Specific AT GPSRD GPSRD 0 3F 0 63 0 1 OK N A N A AT GPSRD lt nmeaMsgs gt lt decimal gt GPG e OK N A N A The output NMEA sentence depends on whether the
4. lt nmeaMsgs gt parameter is entered in Hex or Decimal format By default the lt decimal gt parameter is not required and lt nmeaMsgs gt parameter has to be entered as HEX value without the preceding Ox characters as outlined in Hex Format table below This field is the sum of the type of NMEA messages desired A user has the following message options to select from Maximum value for lt nmeaMsgs gt in this case would be 3F in Hex format or 63 in decimal format Page 40 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 13 GPSRD lt decimal gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Read current GPS ASCII data continued Hex Format User Type of NMEA Selectable Message 0x01 GGA 0x02 GLL 0x04 GSA 0x08 GSV 0x10 RMC 0x20 VTG Decimal Format User Type of NMEA Selectable Message 1 GGA 2 GLL 4 GSA 8 GSV 16 RMC 32 VTG 1 lt nmeaMsg gt value has to be sum of User Selectable values from decimal table format 0 select values out of hex table format N A Optional Full N A Page 41 of 65 SkyPatrol Evolution AT Command Set Reference skypatrol 2 14 lgnition Debounce IGNDBNC Debounce Ignition hardware line for the specified amount of time Command Function This command allows a user to set ignition debounce
5. 0 59 The second on which the alarm is being set to trigger on Values range from 0 59 Periodic Alarm time in minutes RTC Alarm will be reset at a period specified by this parameter N A Optional Full Page 59 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 24 RTCALRM Real Time Clock Alarm continued Notes This command is used to set the Alarm time for the RTC Currently all time is based on 24 Hour time format The alarm may be cleared using the command AT RTCCLRA This call in conjunction with the use of either the EVENT engine or the RTCWAKE command the user has a rich feature set of driving other events or waking the system up at a pre determined time in the future No checks are made for alarm time not being later than current time Examples Following sets and alarm for 2003 October 13th at 17 00 Hours at rtcalrm 3 10 13 17 0 0 OK Following queries the alarm for current time and shows that the alarm being Enabled for 2003 October 13th at 17 00 hours at rtcalrm RTCALRM 01 03 10 13 17 00 00 0 OK Following call unsets alarm followed by displaying alarm time information at rtcclra OK at rtcalrm RTCALRM 00 03 10 13 17 00 00 0 OK TT8740AN001 1 09a Page 60 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 24 Remote TAIP GPSRTP Enable remote TAIP messag
6. TAIP a id desucteses A A OR ONO pee 226 SCRIPT VERSION tt Aita SkyPatrol Evolution AT Command Set Reference misil skypatrol 1 Introduction 1 1 Document Scope This documentation pertains to the AT Command Set to be used in conjunction with the SkyPatrol Evolution series units 1 2 Platform Reference and Use The SkyPatrol Evolution series unit will be referred to using various terms to include MS Mobile Station TA Terminal Adapter DCE Data Communication Equipment or ME Mobile Equipment The SkyPatrol Evolution series unit can be controlled via the use of a DTE Data Terminal Equipment platform by issuing the AT commands via a serial interface 1 3 Command Syntax The attention or AT prefix is required prior to entering any command All commands require a carriage return or lt CR gt following the entry of the desired command All command responses are encapsulated by a carriage return and line feed or lt CR gt lt LF gt The ASCII display of these characters is suppressed with only the modem response being presented The following examples demonstrate the potential usage of AT commands presented Type Example Description Command Format AT GXXX When entered will Query return the command format and value ranges Command Read AT GXXX When entered will return the current valu assigned to the command Command Write AT GXXX lt value gt lt value gt When entered will set
7. a list of supported TAIP commands N A Optional Full N A Page 62 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 26 Script Version USRVAL Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt hexval gt Reference Standard Scope Implementation Scope TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Script Version Allows the user to record an ASCII HEX number for event script versioning SkyPatrol Specific AT USRVAL OK AT USRVAL lt hex value gt lt cr gt OK AT USRVAL USRVAL hex value OK N A N A O FFFFFFFF N A Optional Full Page 63 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol Appendix A Default AT Values GPSLCL MESSAGE Default Value Default Value Meaning GEOFNC Default Value Default Value Meaning GPSRD Default Value Default Value Meaning PWRSAV Default Value Default Value Meaning TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC CONFIGURE SENDING OF LOCAL GPS 0 feature disabled Geo fencing a circle area 1 0 0 0 2 0 0 0 3 0 0 0 4 0 0 0 5 0 0 0 6 0 0 0 7 0 0 0 8 0 0 0 9 0 0 0 10 0 0 0 11 0 0 0 12 0 0 0 13 0 0 0 14 0 0 0 15 0 0 0 16 0 0 0 17 0 0 0 18 0 0 0 19 0 0 0 20 0 0 0 21 0 0 0 22 0 0 0 23 0 0 0 24 0 0 0
8. gt or when lt parm1 gt and lt parm2 gt are equal 3 Output An Output event is executed when all input event conditions defined as Transition Trigger Occurrence Trigger or Input Trigger for that particular lt event group gt are met lt event category gt This parameter defines the actual Input or Output Event number and their valid range for lt parm1 gt and lt parm2 gt The below table defines the values for lt event category gt lt parm1 gt and lt parm2 gt parameter for input events defined as a Transition Trigger Occurrence Trigger or Input Trigger event category Parml Parm2 Description 0 Oorl 0 or 1 GPIO1 General purpose Input Output 1 0 Low 1 High Oor 1 Oorl GPIO2 General purpose Input Output 2 0 or 1 0 or 1 GPIO3 General purpose Input Output 3 0 or 1 Oor 1 GPIO4 General purpose Input Output 4 0 Main battery disconnected 1 Main battery connected Oor 1 0 or 1 GPIOS General purpose Input Output 5 Controls the RESET line of the GPS receiver 0 Turn OFF the GPS receiver 1 Turn ON the GPS receiver 0 or 1 Oorl GPIO6 General purpose Input Output 6 0orl 0orl GPIO7 General purpose Input Output 7 Oorl 0orl GPIO8 General purpose Input Output 8 CO A Nn Modem power up indication 0 to5 Oto 5 Modem GSM registration see A
9. level to the message format NOTE This bit field sends 3 bytes ASCII when Bit 0 is set to 0 o 1 byte when Bit 0 is set to 1 Bit 24 1 add GPS over speed data 6 bytes of Odometer information in Binary format or 18 bytes if Bit 0 is set to 0 Binary format xxyyzz xx is speed specified by AT GPSOSI yy is the maximum speed incurred during the interval zz is the duration in seconds of the interval ASCII format Xxxxx yyyyy zzzzz fields are five bytes long comma delimited and MSBs of each field are zero padded 0 do not add this particular field of GPS data Note yyyyy should be interpreted as yyyy y knots Bits 25 31 TBD Notes A maximum of 150 events input and output are supported Reference Standard Scope Optional Implementation Scope Full Notes TT8740AN001 1 09a A maximum of 150 events input and output are Page 24 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 5 Event Query SEVNTRY Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt used gt lt left gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC EVENT QUERY This command queries how many events have been used and how many are left AT
10. lt parm1 gt and less than or equal to lt parm2 gt The output event would be executed when an input lt event category gt requirements are satisfied or transition to the value set by lt parm1 gt and lt parm2 gt when they are equal lt parm1 gt should be the min value and lt parm2 gt should be the max value Example 4 Parml Parm2 o Max Figure 4 An output event will be executed when the current value of an input event is between lt Parm1 gt and lt Parm2 gt including boundary conditions Example 5 Parml 0 Parm2 1 0 1 Figure 5 An output event will be executed when the value of the input event changes from 0 to 1 or vice versa Example 6 ll m Parml Parm2 o a Figure 6 An output event will be executed when the value of the input event is 1 and lt Parm1 gt along with lt Parm2 gt is set to 1 Input Trigger An Input Trigger is defined as an input condition defined by lt event category gt that should be used as a logical AND condition to another input TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 16 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol condition defined as Transition Trigger or an Occurrence Trigger An Output event is not triggered when Input Trigger condition is valid The input event defined as Input Trigger is valid when within the event range defined by lt parm1 gt and lt parm2
11. modem functions 60 Field O l Table below See Bit Generate and transmit message to main serial port based on Parml and Parm2 values GPIO Flash Table Parml Parm2 Bits 16 31 determine the low signal state while bits 0 15 determine the high signal state A value of 0 for bits 16 31 indicates the GPIO will remain in low signal state for the same amount of time as the high signal state 50 duty cycle The high or low states are measured in multiples of 1 4 seconds The toggle count is set by Parm2 The flashing GPIO event will cause the GPIO output state to toggle at time 0 to the opposite state prior to starting the GPIO output flash event processing This counts as toggle 1 An even number of toggle count will force a final state which is the same as the initial state An odd number of toggle count will force the final state to be opposite of the initial GPIO output condition 0 toggle forever Bit Field Table Parm2 value is obtained as a result of selecting individual bit fields from the table below Parm2 Bit 0 format format 1 send all data generated as a result of this table in Binary 0 send all data generated as a result of this table in ASCII Bit 1 1 add parml data to UDP message 4 bytes in Binary format 11 bytes of data in ASCII format 0 do not add parm1 data to outbound UDP message of Bit 0 setting Bit2 1
12. than lt parm1 gt and less than lt parm2 gt or was greater or equal to lt parm2 gt is now less than lt parm2 gt but greater than lt parm1 gt The output event would be executed when an input lt event category gt requirements are satisfied or transition to the value set by lt parm1 gt and lt parm2 gt when they are equal lt parm1 gt should be the min value and lt parm2 gt should be the max value Example 1 Parml Parm2 o Max Figure 1 An output event will be executed when the value of an input event exceeds lt Parm1 gt previously it was lt Parm1 gt or less or decreases to a value less than lt Parm2 gt previously it was lt Parm2 gt or greater Example 2 Parml Parm2 0 0 a Figure 2 An output event will be executed when the value of an input event is 0 previously it was TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 15 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol anything else but 0 and lt Parm1 gt along with lt Parm2 gt is set to 0 Example 3 Parml Parm2 1 o 1 Figure 3 An output event will be executed when the value of an input event is 1 previously it was anything else but 1 and lt Parm1 gt along with lt Parm2 gt is set to 1 Occurrence Trigger An Occurrence Trigger is defined as an input condition defined by lt event category gt whose current value is greater than or equal to
13. the command to specified value s Command Execution AT GXXX When entered will execute the specified command TT8740AN001 1 09a Page 9 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference an skypatrol 1 4 Revision History 2 5 03 Initial Draft 4 29 03 Initial Release C Added EVENT command 6 10 03 1 02 Update EVENT command Parm1 and Parm2 definitio for Output Flash Event 6 13 03 Added AT NETMON command reference 11 11 03 1 04 C Patel Added AT GPSODOM command Updated AT PWRSAV AT GEOFNC and ATSEVENT commands 08 22 05 D ONeil Added MSGLOGEN MSGLOGRD MSGSND 11 15 05 1 06 D ONeil Corrected MSLOGEN command 2 12 07 1 07 D ONeil Edited Input and Output tables in SEVENT Added RTCALRM Added IGNDBNC 11 16 07 1 08 D ONeil Added GFDBNC Added Input Event 65 Edited Output Event 45 Added Output Events 54 58 Added SHBRST Added SUSRVAL Added GPSOSI Added Input Event 71 Added Bit 24 to Parm2 value table Added SIODBNC Added Event 72 Added EVDELR GFDEL Added output event 59 Added input events 66 69 timers 5 8 Edited input event 71 Added output event 60 Edited Bit 6 01 24 08 1 09 D ONeil Added GPSQUAL Added MSGLOGDMP TT8740AN001 1 09a Page 10 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 ATCommands 2 1 Automatic PIC Reset
14. type gt lt event category gt lt parm1 gt lt parm2 gt OK Read Format ATSEVENT Response SEVENT evgp evtyp evcat p1 p2 1A 0 27 1 4 1B 3 22 0 0 2A 0 27 0 0 2B 3 14 0 0 3A 0 9 2 4 3B 3 37 1 0 4A 0 9 5 5 4B 3 21 0 0 5A 0 9 0 0 5B 3 13 0 0 6A 0 9 1 1 6B 3 21 0 0 Execution Format N A Response TT8740AN001 1 09a Page 14 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 4 EVENT Parameter Values lt event group gt lt event type gt User Defined Input Output continued This parameter defines the group number of a group of events and the order they are executed Events are grouped together to control execution sequence A group number has to have at least one input event and one output event Multiple input events within a group number would be treated as a logical AND condition Multiple output events within a group number would be executed individually in a sequential manner Valid values for group number are 1 thru 99 This parameter defines the type of event Input or Output An Input event can be defined as Transition Occurrence or Input The output event is executed when input event conditions are met Value Type of event Description Transition Trigger A transition Trigger is defined as an input condition defined by lt event category gt whose value was previously lt parm1 gt or less is now greater
15. 0 Changes GPIO 4 to Input from Output 4 0 0 Changes GPIO 5 to Input from Output 5 0 0 Changes GPIO 6 to Input from Output 6 0 0 Changes GPIO 7 to Input from Output 7 0 0 Changes GPIO 8 to Input from Output 8 0 0 Set GPIO 1 configured as Output to Low 0 9 0 0 Set GPIO 2 configured as Output to Low 0 TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 19 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 10 0 0 Set GPIO 3 configured as Output to Low 0 11 0 0 Set GPIO 4 configured as Output to Low 0 12 0 0 Set GPIO 5 configured as Output to Low 0 13 0 0 Set GPIO 6 configured as Output to Low 0 14 0 0 Set GPIO 7 configured as Output to Low 0 15 0 0 Set GPIO 8 configured as Output to Low 0 16 0 0 Set GPIO 1 configured as Output to High 1 17 0 0 Set GPIO 2 configured as Output to High 1 18 0 0 Set GPIO 3 configured as Output to High 1 19 0 0 Set GPIO 4 configured as Output to High 1 20 0 0 Set GPIO 5 configured as Output to High 1 21 0 0 Set GPIO 6 configured as Output to High 1 22 0 0 Set GPIO 7 configured as Output to High 1 23 0 0 Set GPIO 8 configured as Output to High 1 24 0 0 Toggle GPIO 1 configured as Output 25 0 0 Toggle GPIO 2 configured as Output 26 0 0 Toggle G
16. 09a Page 34 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 10 GPSODOM Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC GPS Odometer History continued Distance traveled within an hour is only saved on top of every hour and during an Ignition off if configured Distance for the current hour is not saved in the event of a power cycle Hour displayed is in Greenwich Mean Time GMT zone Page 35 of 65 SkyPatrol Evolution AT Command Set Reference skypatrol 2 11 GPS Overspeed Interval GPSOSI Set and Query the GPS overspeed interval Command Function This command allows the user to define the criteria for a GPS overspeed event A GPS overspeed event occurs when a minimum speed is maintained for a specific duration of time Command Functional Group SkyPatrol Specific Command Format Query AT GPSOSI Response GPSOSI 0 65535 0 65535 OK Write Format Response AT GPSOSI 0 65535 0 65535 OK Read Format Response AT GPSOSI GPSOSI lt speed gt lt interval gt lt status gt lt max_speed gt lt duration gt OK Execution Format Response AT GPSOSI ERROR Parameter Values lt speed gt Speed in nautical miles hr that must be met and or exceeded to trigger the GPS overspeed event lt interval gt Number of consecutive seconds for which lt speed gt must be maintained to trigger the GPS ove
17. 25 0 0 0 feature disabled Read current GPS data none n a Enable power save mode 0 0 0 feature disabled Page 64 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol GPSRTP Default Value Default Value Meaning TAIP Default Value Default Value Meaning EVENT Default Value Default Value Meaning NETMON Default Value Default Value Meaning GPSODOM Default Value Default Value Meaning TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Enable remote TAIP messaging 0 feature disabled Enable the user to send TAIP data to the GPS receiver none n a User Defined Input Output Events 1 6 are configured Event group 1 and 2 are associated with User LED 2 and GPS fix Event group 3 6 are associated with User LED 1 and registration status User LED 1 indicates registration status User LED 2 indicates GPS fix status Network Monitor 0 0 feature disabled GPS Odometer 0 no distance traveled Page 65 of 65
18. AT Command Set Reference Revision 1 09A s ypatrol 2 18 Message Log Enable MSGLOGEN Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt setting gt Reference Standard Scope Implementation Scope TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Message Log Enable The MSGLOGEN command has been created to enable or disable saving GPS data generated via the event engine in modem s memory AT MSGLOGEN MSGLOGEN 0 1 OK AT MSLOGEN lt setting gt OK AT MSGLOGEN MSGLOGEN lt setting gt 0 1 possible valid values 0 Disable message logging default Event data is sent to the remote server upon occurrence 1 Enable message logging Event data has to be read via AT MSGLOGEN command or when AT MSGLOGEN 0 is sent Page 47 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 19 MSGLOGEN Message Log Enable continued Notes If AT MSGLOGEN command was enabled and any unsent messages exist in memory then the unsent data will be sent to the remote server when data logging is disabled TT8740AN001 1 09a Page 48 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 19 Message Log Read Data MSGLOGRD Command Function Command Functional G
19. HBRST Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt hours gt Reference Standard Scope Implementation Scope TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Automatic PIC Reset This command allows the user to program the reset interval SkyPatrol Specific AT HBRST HBRST 0 4 168 OK AT HBRST lt hours gt lt cr gt OK AT HBRST HBRST lt hours gt OK N A N A 0 Off 4 168 Number of hours until we stop providing heartbeat pulse to PIC N A Optional Full Page 11 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 2 Delete a Range of Event Groups EVDELR Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt start gt lt stop gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Delete a Range of Event Groups This command deletes a range of event groups SkyPatrol Specific AT EVDELR EVDELR 0 99 0 99 OK AT EVDELR lt start gt lt stop gt OK N A N A N A N A First group index in range to be deleted Last group index in range to be deleted N A Optional Full This feature is available in software
20. IMx command to 0 44 Execute AT command stored at index number of 1 15 0 the SSTOATEV command Parm1 identifies the index number TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 20 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 45 0 21474836 47 See Bit Field Table below Sends data over SMS to All SMS destination addresses configured via SSMSDA command For select SSMSDA entries see event categories 54 58 46 N A N A Reserved 47 0to 1 Input Event Counter 48 0to 1 Input Event Counter reset to value stated by parm2 49 0 1000000 Set geo fence specified by parm to current latitude amp longitude with radius specified by parm2 50 0to 1 Emulate ATSEVTEST command via event engine Parml is the input event number while Parm2 is the value to emulate for the input event 51 8640000 0 262800 Enter Power Save Mode Parm1 indicates time to stay ON in seconds max 100 days Parm2 indicate time to stay OFF in minutes max 6 months Note RTC must be backup battery voltage and power control pin has to be configured according on the hardware for this feature work 52 0to 1 See Bit Field Table below Generate and transmit one TCP IP Message to IP address amp port number listed by FRIEND command based on Parm1 and Parm2 values 53 0 16 Sets periodic RTC al
21. ND condition with other input events Has the user programmed any geo fence Normally this can be found by sending 54 Dori Oorl AT GEOFNC command and verifying it manually based on the response sent by the device 0 geo fence does not exists 1 at least one geo fence was created 55 N A N A Reserved 56 N A N A Reserved 57 N A N A Reserved 58 N A N A Reserved 59 0 100 0 100 Battery level as a percentage 60 0 9999 0 9999 Number of Unsent Messages msglogrd count 61 0 100 0 100 Memory full percentage msglogrd 62 63 64 Receipt of Incoming Call with Call Identifier matching one the numbers configured via the 65 1 to5 1to5 EVCID command lt Parm1 gt and lt Parm2 gt correspond to range EVCID entries which will generate the input event 66 1 1 Timer 5 set by ATSEVTIMS 67 1 1 Timer 6 set by ATSEVTIM6 68 1 1 Timer 7 set by ATSEVTIM7 69 1 1 Timer 8 set by ATSEVTIM8 70 N A N A Reserved GPS Antenna Status 0 unknown 71 0 3 0 3 1 good 2 open 3 short 22 0 1 0 1 0 A GPS overspeed interval has ended 1 A GPS overspeed interval has begun The below table defines the values for lt event category gt lt parm1 gt and lt parm2 gt parameter for output events defined as Output event Daremi Parad Description category 0 0 0 Changes GPIO 1 to Input from Output 1 0 0 Changes GPIO 2 to Input from Output 2 0 0 Changes GPIO 3 to Input from Output 3 0
22. NY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY WAY TO THE PRODUCTS PROPRIETARY INFORMATION AND ACCOMPANYING ACCESSORIES AND MATERIALS INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS REGARDLESS OF WHETHER SKYPATROL HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND SKYPATROL EVEN IF SUCH DAMAGES ARISE FROM THE NEGLIGENCE OF SKYPATROL AND OR ITS AGENTS BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU YOU ACKNOWLEDGE THAT THE PRODUCT MAY ALLOW YOU AT YOUR DISCRETION TO RECEIVE WHERE AVAILABLE FROM AN AUTHORIZED DISTRIBUTOR SERVICES ENABLED THROUGH THE USE OF THE PRODUCT AND YOU IRREVOCABLY AND ABSOLUTELY AGREE THAT UNLESS YOU HAVE PURCHASED SUCH SERVICES DIRECTLY FROM SKYPATROL SKYPATROL SHALL NOT BE LIABLE IN CONNECTION WITH ANY ACTIONS OMISSIONS OR OTHER OCCURRENCES WITH RESPECT TO SUCH SERVICES PROVIDED BY AN AUTHORIZED DISTRIBUTOR Date JANUARY 24 DRAFT vou Draft 2008 MARCH 20 DRAFT ooo 2003 C Moreno Table of Contents TI INTRODUCTION Scar ii did ad atasiectssesstedessuense 1 1 DOCUMENESCOPE a oidos 1 2 PLATFORM REFERENCE AND USE oococcncncncnonononononononononononononononononononononononononononos
23. PIO 3 configured as Output 27 0 0 Toggle GPIO 4 configured as Output 28 0 0 Toggle GPIO 5 configured as Output 29 0 0 Toggle GPIO 6 configured as Output 30 0 0 Toggle GPIO 7 configured as Output 31 0 0 Toggle GPIO 8 configured as Output 32 Flash GPIO 1 configured as Output 33 Flash GPIO 2 configured as Output 34 Flash GPIO 3 configured as Output 35 See GPIO Flash Flash GPIO 4 configured as Output 36 Table below Flash GPIO 5 configured as Output 37 Flash GPIO 6 configured as Output 38 Flash GPIO 7 configured as Output 39 Flash GPIO 8 configured as Output 40 Generate and transmit one UDP Message to first IP address listed in FRIEND command and port number listed in SUDPAPI command based on Parml and Parm2 values 41 See Bit Generate and transmit a UDP message with Field Acknowledge This message is controlled by 0 to l SACKTM command for number of retries sent Table alme This message has to be acknowledged to avoid sending of retries 42 Generate and transmit one UDP Message to all IP address listed in SFRIEND command and port number listed in SUDPAPI command based on Parml and Parm2 values 43 Resets the timer Timer 1 Timer 4 specified by Parml to the time in seconds specified by Parm2 Parm2 when set to 0 resets the timer 1 4 0 to the time last set by SEVTIMx command A value other than 0 would set the timer to expire at the new specified interval A timer can only be disabled by setting SEVT
24. SEVNTRY SEVNTRY lt used gt lt left gt OK N A N A N A N A N A N A Number of events that have been used Number of events available for new entries N A Optional Full Page 25 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 6 Event Counter EVTIMQRY Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Event Counter This command shows the current count for the event counter indicated by the argument SkyPatrol Specific AT EVTIMQRY SEVTIMQRY 1 8 OK AT EVTIMQRY lt timer_index gt EVTIMQRY lt timer_index gt lt count gt OK ATSEVTIMQRY ERROR AT EVTIMQRY 8 SEVTIMQRY 8 0 000 OK N A ITU T Ref V 25ter Chapter 6 3 8 Mandatory Full Page 26 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 7 Geo Fencing GEOFNC Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt fenceNum gt lt radius gt lt latitude gt lt longitude gt Reference Standard Scope TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Geo fencing a
25. T CREG command description for GSM registration status information 10 0 to 8 0 to 8 Modem GPRS registration see AT CGREG command description for GPRS registration status information 11 Oor 1 Oor 1 Receipt of IP address 0 No IP address 1 Valid IP address obtained 12 Timer 1 set by ATSEVTIM1 13 Timer 2 set by ATSEVTIM2 14 Timer 3 set by AT EVTIM3 15 1 Timer 4 set by ATSEVTIM4 16 0 to 1000000 1000000 GPS Distance unit of measurement is meters TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 17 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 17 0to250 250 Maximum Velocity unit of measurement is Knots 0 to Analog Digital 1 18 1760 1760 0 to Analog Digital 2 19 1760 1760 20 Reserved Geo Fence 1 See AT GEOFNC command for 21 0or1 Hard details on setting a circular geo fence 0 Leaving Geofence area 1 Entering Geofence area 22 Oorl Oor 1 Geo Fence 2 23 Oorl 0orl Geo Fence 3 24 Oorl Oor 1 Geo Fence 4 25 Oor 1 Oor 1 Geo Fence 5 MT Power Save Event 26 Oorl Oor 1 0 Exit Power Save Mode 1 Enter Power Save Mode GPS Status 27 Oorl 0orl 0 Invalid GPS data 1 Valid GPS data 28 1 1 RTC Alarm Input Oto Invalid GPS
26. TY IS LIMITED IN DURATION TO THE DURATION OF THE EXPRESS LIMITED WARRANTY SET FORTH ABOVE SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU YOU MAY ALSO HAVE ADDITIONAL RIGHTS NOT STATED IN THIS DOCUMENT IF ANY PORTION OF THE LIMITED WARRANTY PROVIDED HEREIN IS ILLEGAL OR UNENFORCEABLE SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE REMAINDER OF THE LIMITED WARRANTY This Limited Warranty allocates the risk of Product and Software failure between you and SKYPATROL and SKYPATROL s pricing of the Product reflects this allocation of risk and the limitations of liability set forth below The agents employees distributors and dealers of SKYPATROL are not authorized to make modifications to the Limited Warranties set forth herein or make additional warranties binding on SKYPATROL Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by SKYPATROL and should not be relied upon LIMITATION OF LIABILITY SKYPATROL S ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE LIMITED TO THE GREATER OF THE AMOUNT PAID BY YOU FOR THE PRODUCT OR SOFTWARE LICENSE OR U S 25 00 TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL SKYPATROL OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER UNDER A
27. _day gt lt rtc_hour gt lt rtc_min gt lt rtc_sec gt lt rtc_alarmTimeinMinutes gt OK Execution Format N A Response N A TT8740AN001 1 09a Page 58 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 24 RTCALRM Parameter Values lt rtc_enabled gt lt rtc_year gt lt rtc_month gt lt rtc_day gt lt rtc_hour gt lt rtc_min gt lt rtc_sec gt lt rtc_alarmTimeinMinutes gt Reference Standard Scope Implementation Scope TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Real Time Clock Alarm continued Parameters are positional dependent any parameter may be omitted with the use of the comma as a place holder on command line If a parameter is omitted then the current value in the hardware is used Indicates if alarm is enabled or not 1 gt Enabled 0 gt Disabled The year on which the alarm is being set to trigger on The RTC supports years 2000 2099 The data is entered as a two digit value 0 99 The month on which the alarm is being set to trigger on Values range from 1 12 The day on which the alarm is being set to trigger on Values range from 1 31 The hour on which the alarm is being set to trigger on Values range from 0 24 for 24 Hour mode settings NOTE only 24 Hour mode currently supported The minute on which the alarm is being set to trigger on Values range from
28. add MDMID value 22 bytes of ASCII data irrespective 0 do not add MDMID value ASCII format Bit3 1 add IOCFG and IOGPA GPIO direction and data in ASCII HEX format 2 bytes in Binary format 6 bytes in 0 do not add GPIO direction and data value ASCII format 0 do not add A D 1 value Bit4 1 add IOADC1 value 2 bytes in binary format 5 bytes in Copyright 2005 SkyPatrol LLC Page 22 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol Bit 5 1 add IOADC2 value 2 bytes in binary format 5 bytes in ASCII format 0 do not add A D 2 value Bit 6 1 Message is stored in non volatile memory until it can be sent regardless of network status 0 Code checks network status before storing message in non volatile memory If it appears that the message can be sent out immediately network status is clear and message queue has few or no messages pending the message is stored in the non volatile message queue until it can be sent Otherwise the message is deleted Bit 7 1 add input lt event category gt number 1 byte in binary format 3 bytes in ASCII format 0 do not add input lt event category gt number Bit 8 1 add GPS data 3 bytes of Date information in Binary format or up to 80 bytes of SGPGGA NMEA message if Bit 0 is set to 0 0 do not add this particular field o
29. arm in minutes hours days months or years Parm1 indicates the frequency with which to generate the message Parm2 indicates the unit with which to generate the message For example Parml Parm2 Result 1 1 RTC Alarm occurs every minute 1 2 RTC Alarm occurs every hour 1 4 RTC Alarm occurs every day 1 8 RTC Alarm occurs every month 54 0 21474836 47 See Bit Field Table below Sends data over SMS to the first indexed SMS destination address configured via SMSDA command 55 0 21474836 47 See Bit Field Table below Sends data over SMS to the second indexed SMS destination address configured via SMSDA command 56 0 21474836 47 See Bit Field Table below Sends data over SMS to the third indexed SMS destination address configured via SMSDA command 57 0 21474836 47 See Bit Field Table below Sends data over SMS to the fourth indexed SMS destination address configured via SMSDA command TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 21 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol TT8740AN001 1 09a 58 See Bit Sends data over SMS to the fifth indexed SMS 0 21474836 47 Field below destination address configured via SMSDA Table command 59 0 0 Turns off the modem Not to be confused with sleeping where RTC continues to function This command shuts down all
30. ata sent as a result of this option will always contain a UDP IP header Data will be sent to the IP address and port number set by SUDPAPI command This option has no effect on the operation of the modem when entered via the AT command mode N A Optional Full N A Page 32 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 10 GPS Odometer GPSODOM Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC GPS Odometer History This command allows the user to read the hourly Odometer history for four days starting with the current day SkyPatrol Specific AT GPSODOM GPSODOM 0 3 OK N A AT GPSODOM lt day gt GPSODOM lt day gt lt date DDMMYY GMT gt lt Hour 0 Hundreds of meters traveled between Midnight and 1 AM gt lt Hour 1 Hundreds of meters traveled between 010000 and 015959 gt lt Hour 2 Hundreds of meters traveled between 020000 and 025959 gt lt Hour 3 Hundreds of meters traveled between 030000 and 035959 gt lt Hour 4 Hundreds of meters traveled between 040000 and 045959 gt lt Hour 5 Hundreds of meters traveled between 050000 and 055959 gt lt Hour 6 Hundreds of meters traveled between 060000 and 065959 gt lt Hour 7 Hundreds of meters traveled between 070000 and 075959 gt lt Hour 8 Hundreds of mete
31. be corrected THIS WARRANTY IS VOID IF YOU BREACH THE SOFTWARE LICENSE SET FORTH ABOVE WARRANTY REMEDIES SKYPATROL s sole liability and your exclusive remedy under the warranties set forth above shall be at SKYPATROL s option to repair or replace any Product or Software that fails to conform to such warranty Nonconforming Product or refund the purchase price paid by you for any such Nonconforming Product upon your return of any Nonconforming Product to SKYPATROL or if you purchased the Product from an Authorized Distributor to such Authorized Distributor in accordance with SKYPATROL s or such Authorized Distributor s standard return material authorization procedures The foregoing notwithstanding SKYPATROL will not pay for i costs of installation or removal ii costs of product set up or adjustment or iii shipping or related charges of returning the Product for repair regardless of whether the repair is covered by the Limited Warranty set forth above You must pay for shipment of the Product to the nearest SKYPATROL Authorized Service Facility and if the warranty claim is valid SKYPATROL will pay for shipment of the repaired or replaced Product back to you You must provide a purchase receipt or other proof of the date of original purchase before warranty service will be rendered All replaced parts and products and products on which a refund is made become the property of SKYPATROL Unless prohibited by law new or reco
32. ber gt lt debounce_timeout gt OK AT IODBNC IODBNC lt gpio1 gt lt gpio2 gt lt gpio3 gt lt gpio4 gt lt gpio5 gt lt gpio6 gt lt gpio7 gt lt gpio8 gt OK ATSIODBNC ERROR Number of GPIO whose debounce timeout is being set Number of consecutive seconds lt gpio_number gt must remain unchanged before its input event will be triggered Debounce timeout for GPIO1 Debounce timeout for GPIO2 Page 43 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 16 IODBNC lt gpio3 gt lt gpio4 gt lt gpio5 gt lt gpio6 gt lt gpio7 gt lt gpio8 gt Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC I O Debounce continued Debounce timeout for GPIO3 Debounce timeout for GPIO4 Debounce timeout for GPIO5 Debounce timeout for GPIO6 Debounce timeout for GPIO7 Debounce timeout for GPIO8 If lt debounce_timeout gt is set to zero lt gpio_number gt will not be debounced IGNDBNC is effected by this command Changes made to GPIO8 will be seen via IGNDBNC Writes made by IGNDBNC will be seen by IODBNC This feature is available in software version 0 7 8 pkg 43 and later Page 44 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 16 Message Log Clear MSGLOGCL Message Log Clear Command Function The MSGLOGCL command erases the log file Command Functional Group Command Format Q
33. circular area This command allows a user to send a GPS message when the device moves in or out of a geographical area SkyPatrol Specific AT GEOFNC GEOFNC 1 25 0 100000 90 90 180 180 OK AT GEOFNC lt fenceNum gt lt radius gt lt latitude gt lt longitude gt OK AT GEOFNC GEOFNC lt fenceNum gt lt radius gt lt latitude gt lt longit ude gt OK N A Defines the fence number Defines radius of the circle from given Latitude and Longitude coordinates Defines the latitude for the center point of a circle Defines the longitude for the center point of a circle N A Optional Page 27 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 7 GEOFNC Geo fencing a circular area continued Implementation Scope Full Notes An ATSEVENT command has to be set to send a GPS message to the remote host when entering or exiting the fenced area See the MT G Users Manual for example TT8740AN001 1 09a Page 28 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 8 Geofence Debounce GFDBNC Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt out_cnt gt lt in_cnt gt Reference Standard Scope TT8740AN001 1 09a Copyright 2005 SkyPat
34. d to data stored for the GPRS queue The next two values correspond to data stored for SMS AS BACKUP queue and the last two values correspond to data stored for SMS queue e Each value is comma delimited e The first value of any queue represents Total Number of Unread Messages This value can be used as the lt number of messages gt field while reading messages e The second value of any queue represents Total Number of Messages Stored for that Queue Subtract the Total Number of Unread Messages from the Total Number of Messages Stored for that Queue and use that as the lt starting TT8740AN001 1 09a Page 50 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 20 MSGLOGRD Message Log Read Data continued index gt of where to read data from in the memory TT8740AN001 1 09a Page 51 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 20 Message Send MSGSND Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt destination gt lt data gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Message Send The MSGSND command has been created to allow sending of data from one mode to another AT MSGSND
35. data for a period of time unit of 29 1000000 measurement is seconds Will execute at twice 1000000 the value of Param1 0 to Unit staying Idle in one place unit of 30 1000000 measurement is seconds Will execute at twice 1000000 the value of Param Geo Fence 6 See AT GEOFNC command for 31 Gari Oorl details on setting a circular geo fence 0 Leaving Geofence area 1 Entering Geofence area 32 Oorl 0orl Geo Fence 7 33 Oorl Oor 1 Geo Fence 8 34 Oor1 Oor 1 Geo Fence 9 35 Oorl Oor 1 Geo Fence 10 36 Oorl 0orl Geo Fence 11 37 Oorl Oor 1 Geo Fence 12 38 Oorl Oor 1 Geo Fence 13 39 Oorl Oor 1 Geo Fence 14 40 Oorl Oor1 Geo Fence 15 41 Oorl Oor 1 Geo Fence 16 42 Oorl Oor1 Geo Fence 17 43 Oorl Oor 1 Geo Fence 18 44 Oorl Oor 1 Geo Fence 19 45 Oorl Oor1 Geo Fence 20 46 Oorl Oor 1 Geo Fence 21 47 Oorl Oor1 Geo Fence 22 48 Oorl Oor 1 Geo Fence 23 49 Oorl Oor1 Geo Fence 24 50 Oorl Oor 1 Geo Fence 25 Input Event Counter This event will occur 51 0 0 when a counter reaches the maximum number of a selected Input event count TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 18 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol New SMS indication 52 0orl Oorl 0 SMS message read from SIM 1 New SMS message received Current Input Event Counter count that can be e pa 00 AN an A
36. device Command Functional Group SkyPatrol Specific Command Format Query AT GPSLCL Response GPSLCL 0 4 OK Write Format Response AT GPSLCL lt option gt OK Read Format Response AT GPSLCL GPSLCL lt option gt OK Execution Format Response N A TT8740AN001 1 09a Page 31 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 9 GPSLCL Parameter Values lt option gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Configure sending of GPS message to the Serial Port continued 0 Disable sending of GPS data to the local serial port when the device is in AT command mode Default 1 Enable sending of GPS NMEA ASCII data to the local serial port when the device is in AT command mode 2 Enable sending of GPS NMEA ASCII data to the local serial port This option has to be sent by the user in DUN mode Data sent as a result of this option will always contain a UDP IP header Data will be sent to the IP address and port number set by SUDPAPI command This option has no effect on the operation of the modem when entered via the AT command mode 3 Enable sending of GPS TAIP ASCII data to the local serial port when the device is in AT command mode 4 Enable sending of GPS TAIP ASCII data to the local serial port This option has to be sent by the user in DUN mode D
37. er mode 1 reset modem when entering normal power mode N A Optional Full An AT EVENT command has to be set to send a GPS message to the remote host when entering or exiting power save mode If lt dtr gt AND lt ign gt parameters are set to 1 then both DTR and Ignition must be low for lt timeout gt seconds before the unit will enter low power mode The white cable is the ignition line Page 57 of 65 SkyPatrol Evolution AT Command Set Reference skypatrol 2 23 Real Time Clock Alarm RTCALRM Real Time Clock Alarm Settings Command Function This command handles the setting and querying of the RTC alarm registers When the alarm feature has been enabled the SEVENT engine will be invoked upon the going off If the RTCWAKE call is invoked following the alarm feature setup the modem will power back up automatically upon the alarm going off The actions of these two features are mutually exclusive of each other so one or the other will occur but not both Command Functional SkyPatrol Specific Group Command Format Query AT RTCALRM Response RTCALRM 0 99 1 12 1 31 0 23 0 59 0 59 0 43200 OK Write Format AT RTCALRM lt rtc_year gt Response lt rtc_month gt lt rtc_day gt lt rtc_hour gt lt rtc_min gt lt rtc_sec gt lt rtc_alarmTimeinMinutes gt OK Read Format AT RTCALRM Response RTCALRM lt rtc_enabled gt lt rtc_year gt lt rtc_month gt lt rtc
38. er mode when DTR or Ignition line drops The Ignition line has to be connected per the user manual for this feature to work properly A user has the capability of getting a notification when the device entering low power mode or returns to normal operating mode Command Functional Group SkyPatrol Specific Command Format Query AT PWRSAV Response PWRSAV 0 1 0 1 0 65535 0 1 OK Write Format Response AT PWRSAV lt dtr gt lt ign gt lt timeout gt lt reg gt OK Read Format Response AT PWRSAV PWRSAV lt dtr gt lt ign gt lt timeout gt lt reg gt OK Execution Format Response N A Parameter Values lt dtr gt 0 disable the DTR feature 1 enter low power mode after DTR signal went low and timeout has expired lt ign gt 0 disable the Ignition feature 1 enter low power mode after Ignition signal went low and timeout has expired lt timeout gt 0 65535 seconds Timeout value after which the unit will enter low power mode Unit will work in normal mode TT8740AN001 1 09a Page 56 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 23 PWRSAV lt reg gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Enable power save mode continued until the timeout has expired 0 remain registered with GSM GPRS network during low pow
39. f GPS data Bit 9 1 add GPS data 1 bytes of Status information in Binary format or up to 80 bytes of SGPGLL NMEA message if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 10 1 add GPS data 3 bytes of Latitude information in Binary format or up to 80 bytes of SGPGSA NMEA message if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 11 1 add GPS data 4 bytes of Longitude information in Binary format or up to two 80 bytes of SGPGSV NMEA message if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 12 1 add GPS data 2 bytes of Velocity information in Binary format or up to 80 bytes of SGPRMC NMEA message if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 13 1 add GPS data 2 bytes of Heading information in Binary format or up to 80 bytes of SGPVTG NMEA message if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 14 1 add GPS data 3 bytes of Time information in Binary format or 0 bytes if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 15 1 add GPS data 3 bytes of Altitude information in Binary format or 0 bytes if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 16 1 add GPS data 1 byte of Number Of Satellites In View information in Binary format
40. in meters Execution Format Response Parameter Values Reference Standard Scope Implementation Scope TT8740AN001 1 09a Page 54 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 22 SODOMETER Odometer continued Notes The user shall be able to set a seed value for the Virtual Odometer including a value of 0 but not higher than the maximum value of 4000000000 The AT amp F command shall not reset the seed value to 0 The Virtual Odometer reading would be a 4 byte value starting from O to 4000000000 maximum of approximately 2500000 miles before it rolls over to 0 The unit for Virtual Odometer shall be in METERS The Virtual Odometer history shall be updated every second The Virtual Odometer history shall be saved once a minute in modem s memory This value shall be retained through an internal or external reset and can be read upon the next power up or during run time mode The delta distance traveled between the minute marks could be lost due to an unexpected external or non modem originated reset However the total distance traveled till the prior minute would still be preserved TT8740AN001 1 09a Page 55 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference skypatrol 2 22 Power Save PWRSAV Enable power save mode Command Function This command allows a user to put the device in low pow
41. ing Command Function This command enables the user to Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt remoteTAIP gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC select the OTA transmission method of TAIP data SkyPatrol Specific AT GPSRTP GPSRTP 0 3 OK AT GPSRTP lt remoteTAIP gt OK AT GPSRTP GPSRTP lt remoreTAIP gt OK N A 0 disable sending of TAIP data OTA 1 2 Send TAIP data OTA via UDP to the first IP address listed in FRIEND command 3 Send TAIP data OTA via UDP to the first IP address in FRIEND list only N A Optional Full N A Page 61 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 25 TAIP TAIP Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values gt TAIP_Command lt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Enable the user to send TAIP data to the GPS receiver This command enables the user to send TAIP data string to the GPS receiver itself SkyPatrol Specific N A ATSTAIP gt TAIP_command lt OK N A N A See the TAIP reference manual for
42. mation and instructions contained herein Warranty Information LIMITED WARRANTIES The following limited warranties give you specific legal rights You may have others which vary from state jurisdiction to state jurisdiction Hardware Limited Warranty SKYPATROL warrants that the Product shall be free from defects in materials and workmanship and will substantially conform to SKYPATROL s applicable published specifications for the Products for a period of one 1 year from the date of original purchase THIS WARRANTY IS VOID IF THE PRODUCT CASING IS OPENED BY ANYONE OTHER THAN A SKYPATROL AUTHORIZED SERVICE FACILITY The warranty set forth in this paragraph shall not apply to the Software Software Limited Warranty The Software is licensed and not sold Its use is governed by the provisions of the applicable End User License Agreement EULA if any included with the Software In the absence of a separate EULA included with the Software providing different limited warranty terms exclusions and limitations the following terms and conditions shall apply SKYPATROL warrants that the Software will substantially conform to the applicable published specifications for the Software for a period of ninety 90 days from the date of valid activation SKYPATROL does not warrant that the operation of the Software will be error free or uninterrupted or that the Software functions will meet your requirements or that all defects in the Software will
43. nditioned parts and Products may be used in the performance of warranty service Repaired or replaced parts and Products are warranted for the remainder of the original limited warranty period You will be charged for the repair or replacement of the Product made after the expiration of the warranty period WARRANTY EXCLUSIONS AND DISCLAIMER The preceding warranties are conditioned upon submission of a purchase receipt or other proof of the date of original purchase and the preceding warranties shall not apply to and SKYPATROL shall not be responsible for 1 damage failure or malfunction caused by or attributable to acts of God lightning or other incidence of excess voltage or current fresh or salt water immersion or spray abuse neglect accident misuse alteration cosmetic damage or any other occurrence beyond the reasonable control of SKYPATROL 2 the Products and Software if they are not properly and correctly installed configured interfaced maintained stored and operated in accordance with the relevant operator s manual and specifications 3 Services not provided by SKYPATROL 4 the combination or utilization of the Product or Software with accessories products information data systems devices or ancillary or peripheral equipment not made supplied or specified by SKYPATROL 5 the operation of the Product or Software under any specification other than or in addition to the standard specifications for the Product or Soft
44. or 0 bytes if Bit 0 is set to 0 0 do not add this particular field of GPS data Bit 17 1 disables send of OTA messages when MTG is in Low Power Mode 0 sends OTA messages when MTG is in Low Power Mode Bit 18 1 send this OTA message via SMS when GPRS services is not available 0 send this OTA message via GPRS only TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Page 23 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol Bit 19 1 send Last Valid GPS data if current data is invalid 0 send current GPS data valid or invalid Bits 20 1 add Odometer reading 4 bytes of Odometer information in Binary format or 11 bytes 1f Bit 0 is set to 0 0 do not add this particular field of GPS data Bits 21 1 add RTC time 6 bytes of RTC time in Binary format or 13 bytes if Bit 0 is set to 0 0 do not add RTC time with GPS data Bits 22 1 Replace append modem ID field with 10 byte modem ID including one leading and one ending space character if bit 0 is set to 0 Replace append it with 8 bytes long modem ID value if bit 0 is set to 1 no leading or ending space characters in binary mode NOTE bit 22 setting overrides bit 2 setting 0 Sent the modem ID as defined by Bit 2 Note The ID will appear right justified Bits 23 Battery level as a percentage 1 add the battery level to the message format 0 do not add the battery
45. r any purpose without the express written permission of SkyPatrol LLC SkyPatrol may have patents patent applications trademarks copyrights or other intellectual property rights covering subject matter in this document Except as expressly provided in any written license agreement from SkyPatrol the furnishing of this document does not give you any license to these patents trademarks copyrights or other intellectual property 2005 2007 Skypatrol LLC All rights reserved Enabler is a registered trademark of Enfora in the United States Regulatory Compliance FCC The EVOLUTION has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and recei
46. rol LLC Set geofence debounce count This command allows the user to set the of consecutive geofence positions required to trigger an inside geofence or outside geofence event SkyPatrol Specific AT GFDBNC GFDBNC 0 250 0 250 OK AT GFDBNC lt out_cnt gt lt in_cnt gt OK AT GFDBNC GFDBNC lt out_cnt gt lt in_cnt gt OK N A consecutive GPS position reports outside a geofence required to trigger 0 condition for geofence input event see EVENT consecutive GPS position reports inside a geofence required to trigger 1 condition for geofence input event see EVENT N A Optional Page 29 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 8 GFDBNC Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Set geofence debounce count continued Full The GPS reporting interval varies depending on the product For the MTGL the updates are sent once a second so the GFDBNC counts correspond to seconds For the MT uL the updates are sent once every two seconds Page 30 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 9 GPS Local Subscription GPSLCL Configure sending of GPS message to the Serial Port Command Function This command allows the user to configure sending of GPS data on the 9 pin serial port labeled Serial on the SkyPatrol Evolution series
47. roup Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt queue gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Message Log Read Data The MSGLOGRD command has been created to read data from memory AT MSGLOGRD MSGLOGRD 0 2 0 x 0 y OK N A N A N A N A AT MSGLOGRD MSGLOGRD lt queue gt lt number of messages gt lt starting index gt OK 0 2 possible valid values 0 event data that was configured to be sent to a remote server via GPRS only 1 event data that was configured to be sent to a remote server via GPRS primarily but also use SMS as backup method if GPRS is not available 2 event data that was configured to be sent to a remote server via SMS only Page 49 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat ro 2 20 MSGLOGRD Message Log Read Data continued lt number of messages gt Xx x total number of messages one desires to read from the memory A user can choose to read 1 message in which case x 1 or read all messages in which case x 65535 lt starting index gt y y starting index number of messages that are stored in the memory NOTE y cannot be greater than maximum number of stored messages Reference Standard Scope Implementation Scope Notes AT MSGLOGRD command returns 8 values The first two values correspon
48. rs traveled between 080000 and 085959 gt lt Hour 9 Hundreds of meters traveled between 090000 and 095959 gt lt Hour 10 Hundreds of meters traveled between 100000 and 105959 gt Page 33 of 65 SkyPatrol Evolution AT Command Set Reference skypatrol 2 10 GPSODOM GPS Odometer History continued lt Hour 11 Hundreds of meters traveled between 110000 and 115959 gt lt Hour 12 Hundreds of meters traveled between 120000 and 125959 gt lt Hour 13 Hundreds of meters traveled between 130000 and 135959 gt lt Hour 14 Hundreds of meters traveled between 140000 and 145959 gt lt Hour 15 Hundreds of meters traveled between 150000 and 155959 gt lt Hour 16 Hundreds of meters traveled between 160000 and 165959 gt lt Hour 17 Hundreds of meters traveled between 170000 and 175959 gt lt Hour 18 Hundreds of meters traveled between 180000 and 185959 gt lt Hour 19 Hundreds of meters traveled between 190000 and 195959 gt lt Hour 20 Hundreds of meters traveled between 200000 and 205959 gt lt Hour 21 Hundreds of meters traveled between 210000 and 215959 gt lt Hour 22 Hundreds of meters traveled between 220000 and 225959 gt lt Hour 23 Hundreds of meters traveled between 230000 and 235959 gt Execution Format N A Response N A Parameter Values lt day gt 0 today 1 yesterday 1 day ago 2 2 days ago 3 3 days ago Reference N A Standard Scope Optional Implementation Scope Full TT8740AN001 1
49. rspeed event lt status gt If 1 then lt max_speed gt and lt duration gt represent a GPS overspeed interval that is currently active If O they represent the previous GPS overspeed interval TT8740AN001 1 09a Page 36 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 11 GPSOSI lt max_speed gt lt duration gt Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC GPS Overspeed Interval continued The highest speed that was attained in the current or previous GPS overspeed interval Number of consecutive seconds that the speed was at or above lt speed gt If lt speed gt is set to zero the GPS overspeed event is disabled This feature is available in software version 0 7 8 pkg 43 and later Page 37 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 12GPS Quality Filters GPSQUAL Command Function Command Functional Group Command Format Query Response Write Format level gt Response Read Format Response Execution Format Response Parameter Values lt fix type gt lt HDOP level gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC GPS QUALITY FILTERS This command allows the user to set query the filter values used to determine when to interpret GPS data as valid SkyPatrol Specific AT GPSQUAL GPSQUAL 0 1 0 255 OK AT GPSQUAL
50. s ypatrol AT Command Doc TT8740AN001 Skypatrol Evolution AT Command Set Reference Release 1 09A Confidential and Proprietary Information 2005 Skypatrol LLC Do not duplicate without express permission from Skypatrol LLC General All efforts have been made to ensure the accuracy of material provided in this document at the time of release However the items described in this document are subject to continuous development and improvement All specifications are subject to change without notice and do not represent a commitment on the part of SkyPatrol LLC SkyPatrol Inc will not be responsible for any loss or damages incurred related to the use of information contained in this document This product is not intended for use in life support appliances devices or systems where a malfunction of the product can reasonably be expected to result in personal injury SkyPatrol Inc customers using integrating and or selling this product for use in such applications do so at their own risk and agree to fully indemnify SkyPatrol LLC for any damages resulting from illegal use or resale Copyright Complying with all applicable copyright laws is the responsibility of the user Without limiting the rights under copyright no part of this document may be reproduced stored in or introduced into a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise or fo
51. time The ignition line has to be valid for the specified amount before the event GPIO 8 in the event engine will be triggered Command Functional Group SkyPatrol Specific Command Format Query AT IGNDBNC Response IGNDBNC 0 4 OK Write Format Response AT IGNDBNC lt debounceTimeout gt Read Format Response AT IGNDBNC IGNDBNC 0 OK Execution Format Response N A Parameter Values lt debounceTimeout gt 0 4 seconds This field specifies the debounce timeout value Reference N A Standard Scope Optional Implementation Scope Full Notes If the ignition remains ON for less than or equal to IGNDBNC the device will reset TT8740AN001 1 09a Page 42 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 15 I O Debounce IODBNC Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt gpio_number gt lt debounce_timeout gt lt gpio1 gt lt gpio2 gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Debounce specified GPIO for the specified amount of time This command allows a user to set and query GPIO debounce time The GPIO must be unchanged for the specified number of seconds before the input event will be triggered SkyPatrol Specific AT IODBNC IODBNC 1 8 0 60 OK AT IODBNC lt gpio_num
52. uery N A Response N A Write Format N A Response N A Read Format N A Response N A Execution Format AT MSGLOGCL Response OK Parameter Values None Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Page 45 of 65 Copyright 2005 SkyPatrol LLC SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 17 Message Log Dump MSGLOGDMP Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt queue gt TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Dump Unsent Messages to Serial Port This command allows the user to dump the contents of the unsent messages to the serial port This command is non destructive in that it does not actually remove the messages from the queue SkyPatrol Specific AT MSGLOGDMP MSGLOGDMP 0 3 0 1 OK AT MSGLOGDMP lt queue gt lt format gt lt bytes_per_line gt OK N A N A 0 event data that was configured to be sent to a remote server via GPRS only 1 event data that was configured to be sent to a remote server via GPRS primarily but also use SMS as backup method if GPRS is not available 2 event data that was configured to be sent to a remote server via SMS only 3 event data that was configured to be sent to a remote server via TCPAPI only Page 46 of 65 SkyPatrol Evolution
53. ver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Disclaimer The information and instructions contained within this publication comply with all FCC GCF PTCRB RTTE IMEI and other applicable codes that are in effect at the time of publication Skypatrol disclaims all responsibility for any act or omissions or for breach of law code or regulation including local or state codes performed by a third party Skypatrol strongly recommends that all installations hookups transmissions etc be performed by persons who are experienced in the fields of radio frequency technologies Skypatrol acknowledges that the installation setup and transmission guidelines contained within this publication are guidelines and that each installation may have variables outside of the guidelines contained herein Said variables must be taken into consideration when installing or using the product and Skypatrol shall not be responsible for installations or transmissions that fall outside of the parameters set forth in this publication Skypatrol shall not be liable for consequential or incidental damages injury to any person or property anticipated or lost profits loss of time or other losses incurred by Customer or any third party in connection with the installation of the Products or Customer s failure to comply with the infor
54. version 0 7 8 pkg 43 and later Page 12 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A s ypatrol 2 3 Delete a Range of Geo Fences GFDEL Command Function Command Functional Group Command Format Query Response Write Format Response Read Format Response Execution Format Response Parameter Values lt start gt lt stop gt Reference Standard Scope Implementation Scope Notes TT8740AN001 1 09a Copyright 2005 SkyPatrol LLC Delete a Range of Geo Fences This command deletes a range of geo fences SkyPatrol Specific AT GFDEL GFDEL 1 25 1 25 OK AT GFDEL lt start gt lt stop gt OK N A N A N A N A First geo fence index in range to be deleted Last geo fence index in range to be deleted N A Optional Full This feature is available in software version 0 7 8 pkg 43 and later Page 13 of 65 SkyPatrol Evolution AT Command Set Reference Revision 1 09A S KY pat FO 2 4 EVENT EVENT User Defined Input Output Command Function This command allows the user to customize the modem s input and output capabilities Any combination of input events can be monitored to trigger any combination of output events Command Functional SkyPatrol Specific Group Command Format Query AT EVENT Response EVENT 0 99 0 3 0 255 2147483647 2147483647 2147483647 2147483647 Write Format AT EVENT lt event group gt lt event Response
55. ware 6 the Product and Software if the serial number has been removed or defaced 7 any repairs other than those provided by a SKYPATROL Authorized Service Facility 8 consumable parts e g batteries and fuses 9 the unauthorized modification or use of the Product or Software 10 use of the Product without a valid license for the Software or 11 any shipment of the Product claims must be presented to the carrier THE WARRANTIES ABOVE STATE SKYPATROL S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDIES RELATING TO PERFORMANCE OF THE PRODUCTS AND SOFTWARE EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN THE PRODUCTS THE PROPRIETARY INFORMATION AND ACCOMPANYING ACCESSORIES AND MATERIALS ARE PROVIDED AS IS AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND BY SKYPATROL ITS AUTORIZED DISTRIBUTORS OR ANYONE ELSE WHO HAS BEEN INVOLVED IN ITS CREATION PRODUCTION INSTALLATION OR DISTRIBUTION INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT THE STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF SKYPATROL ARISING OUT OF OR IN CONNECTION WITH ANY PRODUCTS OR PROPRIETARY INFORMATION SKYPATROL IS NOT RESPONSIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF GPS SATELLITES OR THE AVAILABILITY OF GPS SATELLITE SIGNALS IF ANY IMPLIED WARRANTY APPLIES TO THE PRODUCT OR THE PROPRIETARY INFORMATION SUCH IMPLIED WARRAN
Download Pdf Manuals
Related Search