InfoCenter User`s Manual - Pro-Lite
Contents
1. Task 1 Enable no SPACE to change Press ENTER Press Space to enable or disable the task press y or z to select task number press Enter to edit the task Input the script that has to run in the task the screen will display To Run Script no 0 Number 0 9 l INFOCENTER V2 02 Input script number ranging from 0 to 9 press Enter or Down arrow to access the next menu Set the Start Time of the task the screen will display From Time HH MM 00 00 Press or f Use the number key to enter a specific hour and minute for The InfoCenter to start running the script Press Left or Right key to move the cursor input the start time of the task and then press Enter or Down arrow for the next menu Set the End Time of the task the screen will display To Time HH MM 00 00 Press or fl Use the number key to enter a specific hour and minute for The InfoCenter to stop running the script Press Left or Right key to move the cursor input the start time of the task and then press Enter or Down arrow for the next menu Set the Start Date of the task the screen will display From Date dd mm yyyy 00 00 0000 Press or f Use the number key to enter a specific month day and year for The InfoCenter to running the script Press Left or Right key to move the cursor input the start2. Country Select character set S English Press SPACE 44 Available country character sets English Scandinavian French Turkish German and Roman Press o INFOCENTER V2 02 Space to change the country setting Press ESC to return to the main menu or Down arrow to access the next menu IZ Select the communication parameters the screen will display Set COMM Use MODEM no Baud Rate 4800 Press SPACE 1 The following baud rates are available 1200 2400 4800 9600 14400 and 19200 Press Left or Right arrow key to move the cursor Press p q or Space to change Press Enter or Down arrow for the next menu Select the line count the screen will display Line Count Set the line count Total lines 4 Press SPACE f 4 types are available 4 lines 8 lines 12 lines and 16 lines Press Space to change the line count Press Enter or Down arrow for the next menu Select the desired date format the screen will display Date FMT Select date format gt dd mm yyyy Press SPACE 1l Available formats dd mm yyyy dd mm yyyy mm dd yyyy mm dd yyyy Press Space to change the date format Press Enter or Down arrow for the next menu Select the desired time format the screen will display Time FMT Select time format 212 hours Press SPACE T Available time formats 12 hours and 24 hours
3. Note You might have to press ESC multiple times until you have returned to the main menu INFOCENTER V2 02 7 Edit Script The script is a program that instructs The InfoCenter how the page s will be displayed Press F2 key to start editing a script the last edited script will be displayed on the screen You should see the following screen If you don t see the main Script menu press F2 again Page no 00 Pause 000 Method Curtain Press or Y The first line shows the page number to be displayed The second line shows the time how long the page will stay on the screen ranging from 000 to 999 seconds The third line shows how the page will appear and disappear on the screen Curtain Jump or Scroll Press ESC to return to the main menu to see how the current page is being displayed Input script number ranging from 0 to 9 and then press Enter key to start editing script the screen will display Script 01 Goto script Number 0 9 i Input the script number ranging from 0 to 9 and then press Enter key If you want to stay and edit the current script press Enter without entering any number Press the Down arrow will display the menu that allows you to Clear the current script Clear Clear this script Are you sure n Press Y or N 14 Press Y and then press Enter key the current script will be cleared Leave the option as N
4. Press Space to change the date format Press Enter or Down arrow for the next menu INFOCENTER V2 02 Select the serial address the screen will display Set ADDR Set serial address 2001 Number 001 255 1 Please input number 001 to 255 to identify the signs in network Use number keys 0 to 9 input the number directly or Space to change the number by plus or minus one After all is set press ESC to exit and return to run mode Note You might have to press ESC multiple times until you have returned to the main menu Edit Page A page is the screen of text or any other information that will be displayed by The InfoCenter Press F1 key to access the Edit Page mode The following screen will display Page No 00 Goto page Number 00 99 Use the number key on your keyboard and enter the page number ranging from 00 to 99 Press Enter to start type in your message Or you can press the Down arrow key to set up to view more options that you can insert onto the current page If you are already in the Page Editing mode where you are entering Text onto a page you will have to return to the Edit Page F1 mode in order to insert or change any properties of a specific text If you press the Down arrow key this screen will display Clear Clear this page Are you sure n Press Y or N tL If you want to clear the contents in the cu
5. ProLite The InfoCenter Version 2 12 KEYBOARD MANUAL FOR MODELS PL 160RWL GWL PL 160RL 160GL PL 160RLWD 160GLWD PL VFD INFOCENTER V2 02 Table of Contents l Set up ODverview memes Pg II Set up Procedures iaia Pg Time Parameter Gettnmg lava Pg ECO ei et tesis Pg Gil SC Deia tuya aaa ai uu ass seeds nana gen cit S s sts Pg Setting Up Display Task Schedule Pg DefaulE Scripti ee Pg III Special Characters Pg IV Shortcut Hot Keys Pg V Contact Information Pg INFOCENTER V2 02 Set Up OVERVIEVV IN Once the InfoCenter is powered plugged in it will start to run By default it will display and fill the screen with 1 s At the same time the InfoCenter will check to see if there s any scripts or schedules been set within its memory If there are no presences of any scripts or schedules within its memory then the following will display No Page lt F1 gt Edit Page lt F2 gt Edit Script lt ESC gt Main Menu The very first thing after The InfoCenter is powered up is to set its basic Parameters Such as time date character set and format Press lt F4 gt key to enter the Set Time Parameter mode For detailed set up procedures please refer to Set up Procedures on page 3 Once the basic paramete
6. http www pro lite com support
7. he RS 232 interface to communicate with a PC or use a MODEM for remote communication The default setting of the INFOCENTER is to use RS 232 at 4800 baud without MODEM This exact setting must be used if you want to program the INFOCENTER with PC Alternatively a maximum 255 signs can be linked into one network by RS422 communication Please contact your supplier for configuration details INFOCENTER V2 02 Set Up Procedures Set Time and Configuration Press the lt F4 gt key to start The InfoCenter s Time Date setting The screen will display Setup Configurations F4 Press ENTER Press Enter or the Down arrow to go the next screen The next menu allows you to Set the Time Set Time HH MM SS 00 00 00 Press or Use the number on the keyboard and enter the hour minute and second of the current time If entered the wrong number by mistake use the Left or Right arrow key to move the cursor to the error location and enter the correct number Press Enter or the Down arrow to go the next screen The next screen allows you to Set the Date Set Date dd mm yyyy 01 01 2000 Press or f The date range is from 1 1 1990 to 31 12 2089 in format dd mm yyyy The procedure is very similar to Set Time menu Press Enter or the Down arrow to go the next screen The following menu allows you to select your Country Character
8. if you don t want to clear reset the current script Press the Down arrow to go to the next menu Delete the current page from script Delete Delete this page Are you sure n Press Y or N 11 Press Y and then press Enter key the current page in the script will be deleted INFOCENTER V2 02 8 To check what is the current page being display press either ESC or lt F1 gt Rey to display the current page Press lt F2 gt key and navigate back to the Delete menu with the arrow key to delete the current page Press the Down arrow will display the menu that allows you to Insert a new page into the current script Insert Inset one page Page no 772 Number 00 99 1 Input page number ranging from 00 to 99 and then press e the given page will be inserted to the script Press ESC key to check and see if the page is being display properly Press F2 key and navigate back to the Insert menu to insert more pages into the script This allows the script to display the pages in sequence Setting Up Display Task Schedule The InfoCenter allows the user to set a specific time and day for the pages to be displayed Each individual Task is a set of agenda that you can apply to The InfoCenter Press F3 key to enter Set Schedule Mode Schedule Edit schedule tasks F3 Press ENTER Press Enter key to start edit schedule the screen will display
9. lt script and press ESC key to exit run mode INFOCENTER V2 02 SPECIAL CHARACTERS In order to insert special characters in your pages first please make sure that you have selected the correct character settings in the SET UP menu To insert a special character please hold the a Rey inserted and simultaneously press the accompanying key according to the below mentioned table ENGLISH CHARACTER KEYBOARD ASCII CODE Alt Q 64 Alt W 156 Y Alt E 152 f Alt R 159 y Alt A 157 SCANDINAVIAN CHARACTER KEYBOARD ASCII CODE A Alt Q 134 Alt W 132 Alt E 145 Alt R 146 Alt A 142 Alt S 143 CE Alt D 242 Alt F 148 Alt Z 153 d Alt X 155 Y Alt C 157 Alt V 154 FRENCH CHARACTER KEYBOARD ASCII CODE Alt Q 133 Alt W 131 Alt E 130 Alt R 138 Alt A 137 Alt S 136 i Alt D 140 i Alt F 139 6 Alt Z 147 Alt X 145 Alt C 151 Alt V 150 Alt B 153 Alt N 135 INFOCENTER V2 02 TURKISH CHARACTER KEYBOARD ASCII CODE C Alt Q 128 Alt W 135 G Alt E 243 j Alt R 244 Alt A 245 Alt S 246 Alt D 153 Alt F 148 S Alt Z 248 S Al
10. rrent page press Y If not leave it s N Press the Down arrow to continue to the next page or ESC to return to the previous menu Ln INFOCENTER V2 02 The menu belovv allovvs you to set the alignment Center Left or Right of your text Set Align Center Left or Right Your choice c Press C L or R tJ Press C to select align center L to select align left or R to select align right After selecting the alignment you want press the Down arrow key to access the Set Font menu Set Font Blink no Fat Face no PressBorF N Press B to toggle the Blink feature of the font and press F to toggle the Fat Face feature of the font Press B once to activate the Blinking mode Press B again to turn it off Press Down arrow to continue on to the next menu or press the ESC key to return to the main menu The last options allows you to Insert the current date or time in your page Insert Time or Date Your choice t Press T or D Press T to select insert time and D to select insert date Press ESC key to return to the page the current time or date will display on the screen To program another page press the lt F1 gt key again you will see the following menu If you don t see the following menu press lt F1 gt key again Page No 01 Goto page Number 00 99 Use the number key to enter the page number you want to edit
11. rs have been set it is time to program the pages in The InfoCenter Programming the page refers to entering the text or any information you want InfoCenter to display By pressing lt F1 gt Key this allows you to choose which page you want to edit The InfoCenter can record up to 99 pages of 160 Characters Within the Page Editing mode you have the options to Clear Set Align Set Font and Insert Time Date onto the current page After the desired messages have been set on each individual page you will have to program one or more script that determines how a page will be display A script defines which pages have to be display the order of the pages to be displayed the pause time of each page and the method the page appears and disappears on the screen Without a properly programmed script the InfoCenter will not display properly You can program up to 10 scripts numbered from 0 to 9 Each Script can contain 50 pages When no tasks are defined within the scripts the InfoCenter will display the default script To access the Script Editing mode press lt F2 gt Within the Script Editing mode you can Clear Delete or Insert pages in the script In order to let The InfoCenter to display the pages set in the Script you will need to activate the script first Press lt F5 gt to set which script will be running when The InfoCenter is on All functions of the INFOCENTER can be programmed with the standard Infrared keyboard You can also use t
12. t X 247 Alt C 154 Alt V 129 GERMAN CHARACTER KEYBOARD ASCII CODE Alt Q 142 Alt W 132 Alt E 153 Alt R 148 Alt A 154 Alt S 129 B Alt D 225 ROMAN CHARACTER KEYBOARD ASCII CODE Alt Q 160 Alt W 165 Alt E 164 Alt R 153 6 Alt A 162 Alt S 161 i Alt D 168 INTERNATIONAL CHARACTER KEYBOARD ASCII CODE Alt U 250 INFOCENTER V2 02 13 Shortcut Hot Reys When you are using a computer to program The InfoCenter the following Shortcut Keys are available for your convenience These Shortcut Keys can be accessed while editing a page Go to the next page press q Go to the previous page press p Move the cursor left press w Move the cursor right press x Move the cursor up press y Move the cursor down press z Move the cursor to the beginning of the line press h Move the cursor to the end of the line press g Delete the current character press k Insert a blank press i Delete the character to the left of the cursor b Clear current page press see below Make current character blink press amp Make current character Fat Face press Align current line to center left or right press Insert Time press _ Insert Date press Exit page edit and return to the run mode v INFOCENTER V2 02 Contact Information Pro Lite Inc 3505 Cadillac Ave Bldg D Costa Mesa California 92626 Technical Support
13. time of the task and then press Enter or Down arrow for the next menu Set the End Date of the task the screen will display To Date dd mm yyyy 00 00 0000 Press or f Use the number key to enter a specific month day and year for The InfoCenter to stop running the script Press Left or Right key to move the cursor input the start time of the task and then press Enter or Down arrow for the next menu ro INFOCENTER V2 02 10 Weekly x0v1v2v3v4v5 x6 0 Sun 1 Mon etc Press or 1 Press Left or Right key to move the cursor press Space to change the selected status You can also use keys 0 to 6 to toggle the selected state directly x means unselected and Y means selected 0 to 6 indicate Sunday to Saturday NOTE When a task runs on certain weekdays go to Weekly set the From Date to 1 1 1980 and To Date to 31 12 2099 first When a task has to run From Date and To Date set all Weekly days to v at first The ten tasks 1 to 10 are ordered from high priority to low priority Only the task with the highest priority can be run at one time Default Script If there are no current Task Script running The InfoCenter will display a default script until a specific Task is assigned Press F5 to set default script Activate current script Run Run Script 0 F5 Number 0 9 T Input the script number you want to run as defau
Download Pdf Manuals
Related Search