Home

Chapter 1 - Revo America

1. NOTE The Event Search dialog box will differ depending on the specifications of the remote DVR NOTE The Text n Event Search Text In tab search may not be supported depending on the specifications and version of the remote DVR Set up the search criteria for the event search in the Event Search dialog box and click the Find button The results will be displayed in the event list A total of 100 results can be displayed at a time Click the Query Next button to display the next results If you select an event in the list the recorded data associated with that event will be displayed on the screen The images may be played back using the playback buttons NOTE When First is selected for the search starting time the search will be from the first recorded data When Last is selected for the search ending time the search will be to the last recorded data Additional Functions Searching Data Source Click the button on the Search View panel to set up the data source to be searched e Search on Local Searches recorded data on primary storage installed in the remote DVR e Search on Archive Searches archived data on backup storage installed in the remote DVR e Search on Other Searches recorded or archived data on storage used for another DVR then ia lts installed in the selected remote DVR Data Source Screen Layout and Frame Layout to hi H Ba es 2 6 leal ea bo Mel BH 2 5
2. Clicking Eh Layout Load will apply the selected frame layout to REVO Remote Pro and clicking EE Layout Setup allows you to set up the user defined frame layout Audio Communication REVO Remote Pro supports audio communication between the REVO Remote Pro system and a DVR location equipped with two way audio The icon will be displayed on each camera screen If you want to enable audio communication with the remote site select any camera of the remote site on the screen and click the right mouse button Selecting Enable Audio from the menu displays the following audio control panel lO If you want to send audio to the selected remote site click the 3 button and talk into the microphone If you want to monitor live audio from the selected remote site through the attached speaker click the 6 button Clicking both button and button allows two way communication Clicking the X button disables audio communication If the remote DVR allows you to select an audio channel to monitor from the REVO Remote Pro system clicking the button displays the Select Audio Channel dialog box Selecta camera channel associated with an audio channel to monitor and click the OK button Seac eee man Select Audio Channel 29 User s Manual Sequence Monitoring Clicking the k button on the toolbar and selecting a desired Auto Sequencing group connects to the registered sites sequentially allowing connection to more than
3. e OSD Margin Set the Horizontal and Vertical margins so that text and icons will MERA display within the edges of the monitor Horizontal Vertical ce Cancel 23 User s Manual Main Monitor Settings DISPLAY 3 Main Monitor Tab e Sequence Mode Select the sequence mode between Full Sequence and Cameo Sequence Selecting the Sequence menu icon at the top of the screen or pressing the SEQUENCE button on the remote control causes the DVR se to sequence cameras The DVR can sequence cameras in two modes Full and Cameo In the Full mode the E Event Monitoring On DVR sequences through the cameras with predefined screen layouts In the Cameo mode the bottom right window of a multi screen format sequences through the cameras See Chapter 3 Operation Live Monitoring for details OSD Main Monitor VGA A Interval NOTE You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts pages so that all the cameras will be displayed You also can set up the DVR to display one camera or a group of cameras all the time while cycling through the remaining cameras in a cameo window This can be done with one camera displayed full screen while displaying the cameo window as a PIP picture in picture or displaying the cameras in a grid pattern with the bottom right window as the cameo NOTE Sequence cannot be used in the 4x4 d
4. 16 Channel Digital Video Recorder Chapter 1 Introduction FEATURES Your color digital video recorder DVR provides recording capabilities for 16 camera inputs It provides exceptional picture quality in both live and playback modes and offers the following features e 8 RJ 12 and 8 BNC Input Connectors e Compatible with Color NTSC and B amp W CCIR and EIA 170 Video Sources e Records up to 480 NTSC Images per Second e Continuous Recording in Disk Recycle Mode e Records while Playing Back and Transmitting to Remote Site e Full Function Infrared Remote Control e User friendly Graphical User Interface GUI Menu System e Multiple Recording Modes Time lapse Pre event Motion Alarm and Panic e Multiple Search Engines Date Time Event Record Table e Audio Monitoring Capable e 8 Channel Audio Recording and 1 Channel Audio Playback e Alarm Connections Include Input and Output e 2 USB 2 0 Ports e Built in Buzzer e Live or Recorded Video Access via Ethernet e Self diagnostics with Automatic Notification including Hard Disk Drive S M A R T Protocol Audio Output VGA Out Video Out Sensors 1 16 Flash Drive H or Flashing Light Alarm mm nq Siren REVO Remote Pro REVO Remote oy Cameras 1 8 Video In Audio In Sy Cameras 1 8 Mouse IR Remote Control Network Typical DVR installation User s Manual PACKAGE CONTENTS The package contains the following e Dig
5. 30 REVO Remote Pro Remote Administration System NOTE Connecting to a Favorite site will be available if the Search Screen display option was set up to connect to selected Favorite sites Refer to 3 3 Menu System Menu for more details on Favorite Site setup NOTE When selecting the display option of Watch and Search Screen during System setup the remote site can be also be set to connect using the right or left mouse buttons This eekan Sere is user defined and must be set during System setup Select Search Screen to connect Search Soreen to the selected site on the Search screen when the text menu screen appears It 1s possible to display cameras in both the Watch Screen mode live view and Search Screen mode at the same time For example you can connect to a remote DVR site with nine cameras Drag and drop the site into the first frame on the viewing screen and select Watch Screen Live video will display in the first nine frames on the screen Then drag and drop the site into the 10 frame on the viewing screen and select Search Screen You will be able to view any video recorded on the remote DVR in frames 10 through 18 Search View Panel Search view MET 2009 07 09 2009 07 10 0 00 21 00 22 00 01 00 02 00 03 00 04 00 TAM 1 CAM2 2 A CAMS ente View The Search View panel consists of playback and search controls time lapse search table and event search table The playback buttons on the Search View panel
6. Exit icon at the top of the screen SA A NOTE It is possible no recorded image displays on the current screen Press the LAYOUT button on the remote control and change the screen mode to 4x4 You will be able to easily see which cameras have recorded video for target time You also can narrow your event search by selecting Option and setting up the new search condition TUS e From Pressing the e button toggles between On and Off From E First When set to Off you can enter a specific Date and Time When ds ee set to On the search will be from the first recorded image ees a e To Pressing the e button toggles between On and Off When Motion E _ m Panic Record z set to Off you can enter a specific Date and Time When set a E y il to On the search will be to the last recorded image Record Channels E Check Alarm In M Disk Almost Full M Disk Bad Cancel e Check Time Overlap Selecting the box and pressing the e button toggles between On and Off You will be able to turn the Check Time Overlap on or off only if user defined date and time have been set in the From and To boxes If the DVR s date and time have been reset it is possible for the DVR to have overlapping start and stop times When set to On you will be asked to select one of the overlapping start and stop times When set to Off the DVR will display search results from all start times to all stop times Alarm In Select the alarm inputs that
7. IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE WARNING CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS The information in this manual is believed to be accurate as of the date of publication We are not responsible for any problems resulting from the use thereof The information contained herein is subject to change without notice Revisions or new editions to this publication may be issued to incorporate such changes The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSource Guide OpenSource Guide pdf or as a printed document included along with the User s Manual User s Manual Important Safeguards 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Cleaning Unplug this equipment from the wall outlet before cleaning it Do not use liquid aerosol cleaners Use a damp soft cloth for cleaning 4 Attachments Never add any attachments and or equipment without the approval of the manuf
8. gt Mail Tab e Enable The DVR can be set up to send an e mail when an event occurs Selecting the box enables the Mail function You will only be able to change the settings 1f Mail is enabled e SMTP Server Set the SMTP server IP address or domain name obtained from your system administrator General Network DVRNS RTSP Mail M Enable NOTE You will need to get the IP address or domain name of the SMTP server from your network administrator You can use the domain name instead of IP address if you set up the DNS server during Network setup e Port Set the SMTP server port number obtained from your system administrator e Use SSL TLS Check the box when sending an e mail via an SMTP server requiring SSL Secure Sockets Layer authentication e Authentication Select the button if the SMTP server needs authentication PRS and set up the Authentication by selecting the Use box and entering the user E Use ID and password j NOTE This product includes software developed by the OpenSSL Project TR Cancel for use in the OpenSSL Toolkit http www openssl org e Sender Recipient Enter the sender s recipient s e mail address The e mail address must include the character to be a valid address CAMERA SETUP Camera Settings e No Selecting the box toggles all or each camera On and Off e Title Change the name ofall or each camera e PTZ Model Select the PTZ device you wish to con
9. or icon is the same as pressing the Left or Right buttons on the remote control OSD Selecting the L OSD icon toggles OSD On and Off 27 User s Manual EVENT MONITORING When an event occurs the DVR will display the camera associated with that event if Event Monitoring On is selected in the Display setup screen OSD tab How the cameras are displayed depends on the number of cameras associated with the event If one camera is associated with the event the DVR will display that camera full screen If two to four cameras are associated with the event the DVR will display the cameras on a 2x2 screen If five to nine cameras are associated with the event the DVR will display the cameras on a 3x3 screen If 10 or more cameras are associated with the event the DVR will display the cameras on a 4x4 screen Event monitoring lasts for the dwell time set for event recording After the dwell time has elapsed the monitor returns to the previous screen unless another event has occurred If you want to return to the live monitoring mode before the dwell time has elapsed press the LAYOUT or one of the camera buttons on the remote control ACTIVE CAMEO MODE You can enter the Active Cameo mode by pressing the e button on the remote control while in any multiview format A yellow outline surrounding the video indicates the active cameo and pressing the arrow buttons moves the active cameo Pressing the e button while in the Active Cameo
10. Backup or press the BACK UP button on the remote control while in the Search mode or Live Monitoring mode and the Backup screen appears to allow backup setup 35 User s Manual ae e From Pressing the e button toggles between On and Off When set IA Record to Off you can enter a specific Date and Time When set to On the From MFirst 04 22 2010 01 32 40 PM copy will be from the first recorded image A da e To Pressing the button toggles between On and Off When set to Ch 1 16 nants ere i Off you can enter a specific Date and Time When set to On the copy will be to the last recorded image Dest 1 Partition 1 62 MB File name 20100422 exe e Channels Select the cameras that you would like to include in your Fi beh video clip e Password Pressing the e button displays a virtual keyboard allowing you to enter a password for reviewing the video clips e Dest Select the storage device on which you would like to record the video clip CAUTION The USB device for backup must be FAT 16 or FAT32 format e File name The DVR automatically assigns a file name to the video clip However you can give the video clip file a different name Pressing the lt button displays a virtual keyboard Enter a file name for the video you are copying and select Close The DVR will automatically add exe to the file name NOTE When naming a file you cannot use the following characters 1 lt
11. DVR REVO Mobile 3 1 0 Cancel 46 REVO Remote Pro Remote Administration System 5 When the following dialog box appears select OK to complete the installation Application Downloading Complete Please check your mobile device screen to see if additional steps are necessary to complete this installation 6 After installing the REVO Mobile software the program will be installed on the My Device Program Files REVO Mobile 3 1 0 folder and you will find the REVO Mobile icon on the desktop Double click the icon or run the My Device Program Files REVO Mobile 3 1 0IREVO Mobile exe file NOTE To remove the program select Start on the Task Bar on the PDA Go to Settings System Control panel Add Delete programs DVR REVO Mobile 3 1 0 in order Clicking the Delete button uninstalls the program Configuration and Operation The Graphical User Interface GUI of the REVO Mobile is as shown below and the description of each menu buttons follows 5 066000 BO Monitoring Screen Displays live video images from the cameras at the remote site 2 Status Information Displays REVO Mobile version information and the status information about the remote site connection 3 Menu Buttons Performs REVO Mobile functions e Connection ts Camera E Screen Mode 2 Image Adjustment PTZ Control Alarm out Control x Disconnection Connection Click the button to perform remote site management D
12. DVRNS server address and port number in the SETUP setting when selecting the Use DVRNS option ID PASSWORD LOGIN EXIT SELECT MODE REMOTE WATCH REMOTE SEARCH NOTE Do NOT close the LOGIN window during the REVO Remote operation otherwise it will cause a script error when switching between Web monitoring and Web search modes and you will need to restart the REVO Remote program NOTE When running the updated REVO Remote for the first time Internet Explorer might occasionally load the information of the previous version In this case delete the temporary internet files by selecting Tools gt Internet Options gt General tab and then run REVO Remote again NOTE There might be a problem that the bottom of REVO Remote page is cropped due to the address or status bars in Microsoft Internet Explorer 7 0 In this situation it is recommended that websites open windows without address or status bars by changing the internet setting Go to the Tools gt Internet Options gt Security tab gt Click the Custom level button gt Select Enable for the Allow websites to open windows without address or status bars option NOTE When running REVO Remote in the Microsoft Windows Vista or higher operating system it is recommended to start Internet Explorer with elevated administrator permissions Click the right mouse button on the Internet Explorer icon and select the Run as administrator option from the context menu Otherwi
13. Layout Setup The user can configure the frame layout by displaying panels on the screen where they are most convenient Set up the user defined frame layout Layout Load e Default Layout Displays the panels that are used most frequently in the Watch Fae and Search screen modes e Admin Layout Displays only the panels that are used most frequently in the Layout Load Admin screen mode e Full Layout Displays all the panels e Hide Layout Hides all panels and displays only the screen e User Defined Layout Displays the user defined layout User Defined Layout Layout Name Layout 1 Layout 2 Layout 3 Layout 4 26 REVO Remote Pro Remote Administration System Layout Setup e Always Load Layout at REVO Remote Pro Startup Select whether or not the selected frame layout loads automatically when REVO Remote Pro starts e Save Enter a layout name and click the Save button to save the current frame layout as a new user defined layout e Rename Select the layout to change from the Layout List and click the Rename button Then change the layout name Delete Select the layout to delete from the Layout List and click the Delete button Layout Setup C Always Load Layout at REVO Remote Pro Startup Layout NOTE Up to 10 user defined layouts can be saved Help Menu Displays REVO Remote Pro version information 3 4 TOOLBAR The Toolbar allows conveni
14. MENU button on the remote control displays the menu icons on the screen Selecting the IEX Search Mode icon at the top of the screen exits the Live Monitoring mode and enters the Search mode Once video has been recorded you can view it by pressing the Play Pause button on the remote control in the Search mode When playing video for the first time the DVR will display the most recent image When playing video subsequent times the DVR will start playing video from the last recalled image Recorded audio will be played when the DVR displays a camera with recorded audio in full screen mode Playback Related Buttons on the Remote Control e CAMERA Buttons 1 to 16 Pressing the individual camera buttons will cause the selected camera to display full screen When selecting 11 to 16 press 10 and then press the 1 to 6 e Playback Buttons Backward When in the pause mode pressing the 41 button moves to the previous image Forward When in the pause mode pressing the 1 button moves to the next image Rewind Pressing the 44 button plays video backward at high speed Pressing the button again toggles the playback speed from 44 444 and 4444 Play Pause Pressing the button plays back video at regular speed The screen displays when the DVR is in the Pause mode and the screen displays gt when the DVR is playing back video Fast Forward Pressing the gt gt button plays video forward at high speed Pressing the button again tog
15. Open Connect the device to the COM and NO Normally Open connector NO is a relay output which sinks 14A 930VDC NO Connector Pin Outs Alarm In 1 to 16 Alarm Inputs 1 to 16 Chassis Ground Alarm Out Normally Open Connecting to the RS 485 Port eS The RS 485 connector can be used to control PTZ pan tilt zoom cameras Connect TX RX or TX RX On of the control system to the or respectively of the DVR See the Camera Setup section in this chapter of this manual and the PTZ camera manufacture s manual for configuring the RS 485 connection 16 Channel Digital Video Recorder Connector Pin Outs Master Unit Slave Unit gt To TX RX gt To gt TX RX Connecting the DVR Power Cord Connect the connector of the adaptor to the DVR and connect the AC power cord to the adaptor and then to the wall outlet WARNING ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET THE POWER CORD HAS A GROUNDING PIN IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE DO NOT MODIFY THE PLUG DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT CAUTION Make sure that the DVR is not so close to any heating unit that it could become overheated FRONT PANEL CONTROLS HDD LED 2 Power LED Alarm LED 4 USB Port NOTE The infrared sensor on t
16. Press the ZOOM button to zoom in and the ZOOM button to zoom out You can use the FOCUS amp and FOCUS E buttons to focus the image You can establish preset positions for PTZ cameras Press the PRESET SET button to create or change Presets You can quickly move PTZ cameras to Preset positions Press the PRESET SELECT button to view an established camera Preset position or click the right mouse button on the PTZ camera screen 28 16 Channel Digital Video Recorder You can save camera position settings as presets so that you can go directly to desired penta UAC TER views Once you have the camera at the desired settings press the PRESET SET 1 Lobby 1 Lobby button and the Set Preset dialog box will appear Select the number you want to assign eee aan to the preset and press the e button on the remote control Use the virtual keyboard to enter the preset name Press the PRESET SELECT button to load the PTZ preset and the Move to Preset dialog box will appear Select the desired preset and press the button on the remote control to load the preset You also can load the preset using the mouse Click the right mouse button on the PTZ camera screen and select the desired preset 3 Room 3 Room NOTE The Preset menu also can be displayed by clicking the right mouse button on the screen while in the PTZ mode While in the PTZ mode pressing the MENU button on the remote control displays the menu icons at Advanced PTZ the top o
17. Rec To 04 17 2008 06 53 02 PM Status Version 37 User s Manual Function Buttons Disconnect Disconnects the current connection on the Status View panel NOTE If you want to connect to another site disconnect from the currently connected system on the Status View panel first by clicking the F button E Remote Setup Allows changing the setup of the remote DVR connected to the Status View panel NOTE Refer to the manual for each applicable remote DVR for more details on system setup E Remote System Log Displays the system log information of the remote DVR connected to the Status View panel J Remote Event Log Displays the event log information of the remote DVR connected to the Status panel NOTE Refer to 3 3 Menu Remote Menu for more details on the Remote System Log and Remote Event Log NOTE When the remote site is not connected to the Status View panel Remote Setup Remote System Log and Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on the Remote Sites panel E Remote Panic Control Controls the panic recording of the remote DVR connected to the Status View panel The E On button indicates that the remote DVR is not in the panic recording mode and you can start panic recording by clicking the button The E Off button indicates that the remote DVR is in the panic recording mode and you can stop panic recording by clicking the button Status Dis
18. S adi 1 1 3 Product FON Maio al ao aaa 1 Chapter 2 Installation oocccoconnccccnncccnnncconnncnnnnncanononanononanononnnnnnnnnononnnenanonos 3 Chapter 3 Configuration icici Sidi eee a a ee eee 7 A E E E E E E E EE E T E nadia 8 AA A A A 13 Fr ae 90 107 genet PON E OE O erent eee 21 Chapter 4 OperatiON oocccccccncoccnnccccnnnoncnncconnnonannnonannnonannonannnnnnnnnnnnnnonannnenananenos 29 AE MONO IN asocia 29 4 2 Playback and Seal event dacesvaialuanst donc oxiahcdvesaiplerenieee 30 49 AG CIUO Kall IRUNCUONA Stata 36 AA Pane Record potro tesi 37 SO A A Ee E 37 A e 39 REVIEWING Video Clips id ii 39 DVR Name Service DVRNS ooocccccoocococccnococoncnnccnncnonononnnnononononnnnnnnonannnnnnanannnss 41 Map E dOr missan aint tots tte arate el eed cte e uate Clas tetas E 41 REVO MODE vienui denied erste lel aetna 46 User s Manual REVO Remote Pro Remote Administration System Chapter 1 Overview 1 1 IN THIS MANUAL This manual describes installation and operation of REVO Remote Pro Remote Administration System software which is designed to be used with remote digital video recorders DVRs 1 2 REVO REMOTE PRO FEATURES REVO Remote Pro program is an integrated software program that controls system management video monitoring video recording and image playback of multiple remote sites REVO Remote Pro offers the following features e Checks and reports status of remote DVRs e R
19. Selecting Audio while in the full screen mode toggles playing live audio On and Off While playing live audio the icon displays on the camera screen if Audio is selected in the Display setup screen OSD tab e Color Control Selecting Color Control and choosing the camera number displays an image adjustment dialog Selecting Color Control and choosing the camera number is the same as pressing and holding a camera button on the remote control for a few seconds You can control brightness contrast hue and saturation for each camera NOTE Selecting Audio will be enabled on camera screens 1 to 8 NOTE It is important that cameras and monitors are correctly installed and adjusted prior to making any image adjustments using the DVR s controls NOTE Any image adjustments you make will be applied to both the live video on the monitors and the recorded video NOTE The Camera Menu also can be displayed by clicking the right mouse button on each camera screen ptz e Edit Group Supports the active cameo function Select Edit Group and choose a camera that you Zoom want to change display position e g Camera A Then click the right mouse button to display the j SO A menu Ifyou choose another camera in the menu e g Camera B the screen displays Camera B Edit Group instead of Camera A Clicking the right mouse button and selecting Exit Group Edit in the menu exits the Active Cameo mode See the following Active Cameo Mode section for detail
20. Server Ml Use UPnP e Type Select the type of network configuration from Manual DHCP and ADSL with PPPoE Manual Y ou can select Manual when using a static IP address for network connection Set up LAN parameters manually Set the numbers of the IP Address Gateway and Subnet Mask DHCP You can select DHCP when the DVR is networked through DHCP Dynamic Host Configuration Protocol The DVR reads the IP address from DHCP network when selecting the Save button ADSL You can select ADSL with PPPoE when the DVR is networked through ADSL Enter the ID and password for ADSL connection and the DVR receives the IP address when selecting the Save button General Network DYRNS RTSP NE Type ADSL with PPPoE IP Address ID Password DNS Server E Use UPnP NOTE Ask your network provider for your network connection type and connection information NOTE If the DVR is configured for DHCP or ADSL the IP address of the DVR might change whenever the unit is turned on If you want to use the DVRNS function you will need to get the IP Address of the DNS Server from the Internet service provider e DNS Server Set the DNS server IP address obtained from your network administrator If you set up the DNS Server the domain name of the DVRNS server or SMTP server instead of the IP address can be used during DVRNS Server or Mail setup Checking the Auto box allows the DVR to obtain the IP address of the DNS server automati
21. button exits the screen without saving the changes 12 16 Channel Digital Video Recorder Digital Video Recorder System Menu 2 Network Menu 3 Camera Menu 4 Record Menu 6 Event Menu Display Menu 04 22 2010 01 48 05 PM NOTE When the installed hard disk drive is not formatted a message box appears asking you to format the hard disk drive If you want to record video you must format the hard disk drive SYSTEM SETUP System Settings SYSTEM gt System Tab e System ID Set the system ID Use the Up and Down arrow buttons or scroll the mouse wheel to increase or decrease the number NOTE It is possible to have multiple DVRs with the same System ID in the same area In this case all DVRs with the same System ID will be controlled at the same time when using the infrared remote control for that ID number system Date Time Storage System ID Language Version Setup e Language Select the desired language Upgrade e Version Displays the software version of the DVR To upgrade the software connect a USB flash drive containing the upgrade package ORAR file rui to the DVR Selecting Upgrade displays the Upgrade ES screen Select the desired upgrade file and press the button The system restarts automatically after completing the upgrade Select a package Cancel e Setup Imports saved DVR settings or exports the current DVR settings Import To import saved DV
22. by using the arrow buttons on the remote control NOTE If the DVR has images recorded in more than one recording mode in the same time range the recording status bar displays recording information in the following priority order Panic gt Pre Event gt Event gt Time The color of the bar indicates different recording modes Red for Panic Yellow for Pre Event Purple for Event and Blue for Time Selecting amp located at the bottom displays the Calendar Search screen Days with recorded video display on the calendar with white numbers You can select the days with recorded video by using the arrow buttons on the remote control Selecting the Display when entering Search Mode box will display the Calendar Search screen whenever entering the Search mode Once you have selected a day pressing the e button displays the first recorded image of the selected date on the screen Once you have selected the date you want to search review the surrounding video by using the playback controls located at the bottom Refer to the Recording Video Playing Recorded Video section of this chapter T cose for information regarding playback controls Calendar Search M Display when entering Search Mode 33 User s Manual Selecting located at the bottom displays the Search menu e Go To Displays the first or last recorded image or searches by date and time see below for more details Go to Backup e Backup Copies a video
23. color reflecting its status on the Map panel Check the box beside Color Use and select each status box to use Click each selected status box and select the desired color When done click the OK button e Unplugged Either connection to the remote site has failed or Device No for the device is not supported by the remote site e Event off Event detection function is not set up e Irregular The device is not working properly e Video Blind Video Loss Motion The event is detected e Alarm In Alarm in is detected e Alarm Out Alarm out is detected NOTE Devices are displayed as Irregular based on the system check settings and as Video Loss Motion Alarm In and Alarm Out based on the event detection settings on the remote DVR NOTE The device displays mixed color when detecting more than two statuses at the same time Name Table Select Name Table in the Option menu to display the name instead of the IP address of the DVR on the Map panel and the following Name Table setup window appears 43 User s Manual Name Table Click the Display Name field of each IP address and enter the name of the DVR IP Address Display Name to display on the popup screen 10 0 12 170 Device Setting Selecting the 2 MB or buttons on the toolbar displays the Camera AlarmOut and Alarmin tabs under the Image Bar Select the icons and drag and drop them at the desired locations on the background image Go to th
24. control scrolling the mouse wheel or clicking the mouse on the desired segment If the DVR s time and date have been reset to a time that is earlier than some recorded video it is possible for the DVR to have more than one video stream in the same time range In this case the overlapping time range in the record table will be separated by a yellow vertical line NOTE The recorded data in the time range located to the right of the yellow vertical line is the latest There are three view modes Standard view Expanded view and Compact view Standard view default displays combined recording information of all camera channels currently displayed on the screen In the Standard view mode selecting the d icon located at the bottom switches to the Expanded view mode The Expanded view displays the recording information of each camera channel currently displayed on the screen Selecting the icon switches to the Compact view mode which displays only the toolbar Selecting the amp icon in the Compact view mode switches to the Standard view mode and selecting the icon in the Expanded view mode switches to the Standard view mode Selecting amp or El located at the bottom zooms the record table Selecting amp displays eight hours 1 minute based and selecting Q displays 24 hours 3 minute based at once To move to earlier or later times that are not shown in the current record table screen select the arrows located at the end of the times
25. drew You can draw lines around shapes by repeating this process Min Blocks Set the minimum number of detection blocks that must be activated to E trigger a motion alarm for Daytime and Nighttime independently Daytime Nighttime Cancel Actions Set the actions the DVR will take whenever motion is detected on the RAEE selected camera Motion event can sound the external alarm or DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions Alarm Out Select the alarm out signals Alarm Out and Beep to be associated with the camera Notify Select Mail if you want to send an e mail to the address set during NETWORK Mail setup PTZ Select the preset position for each PTZ camera where you want PTZ cameras to move to Cancel 21 User s Manual NOTE For the Notify action to work the Mail should be enabled in the NETWORK Mail setup e Motion Ignoring Interval Set the motion ignoring dwell time You can control excessive event logging and remote notification of motion detected after the motion dwell time by adjusting the motion ignoring dwell intervals The DVR will not log and notify motion events occurred during the preset interval range The recording for motion events will not be affected by the Motion Ignoring function e Daytime Setup Select the button and set the Daytime range The DVR will SO consider the remaining time range as the nighttime Dayti
26. enter it manually Device No Set the device number 1 16 for each device If the selected device is a camera Device No changes to Camera No DVRNS Use Select Yes to use DVR Name Service and the DVRNS field appears Enter the IP address or domain name and the port number of the DVRNS server and the name of the DVR registered on the DVRNS server NOTE You should not select numbers that are not supported for devices on the remote DVR when selecting Device No Otherwise the map cannot detect the device and it displays the device status as Unplugged For example Device No should be from 1 to 16 when the device is connected to a 16 channel DVR NOTE If you set the IP address and port number of the DVRNS server in Site Information Setting the DVRNS fields are filled with the information automatically NOTE The DVRNS function is supported only with the devices associated with a DVR providing the DVRNS DVR Name Service function Go to the Event Camera AlarmOut AlarmIn tab and set the option for the devices e Event Camera Selecting an event from a drop down list and checking the Watch View Popup box set the Map panel to pop up another screen when an event occurs Selecting Click from a drop down list and checking the Watch View Popup box pops up another screen by Watch View Pooup clicking the mouse button on the camera icon on the Map panel regardless of event detection 44 REVO Remote Pro Remote Administration Sys
27. following values 8200 for Admin 8016 for Watch 10019 for Search and 8116 for Audio Select the number of cameras at the remote site For example selecting 8 from the list when registering a 16 channel DVR displays video of the first 8 channels on the screen Remote Site Setup Login Setup User ID Password Confirm Password Emergency Event Instruction NOTE When using DVRNS server place a checkmark in the Use DVRNS box The IP Address field will be changed to DVR Name and you can enter the name of remote site registered on the DVRNS server The DVR name you enter should match the name set during the DVRNS setup on the remote DVR Login Setup Enter the user ID and password of the remote site to be accessed If you have entered a user ID and a password the site will be connected automatically without a dialog box requesting a password Select No Password for remote systems that do not require a password e g guest login NOTE Up to 32 characters may be used for the site names telephone numbers and user IDs and up to 8 characters may be used for passwords Emergency Event Instruction Enter the message to display when emergency events are called in from the remote site The Emergency Event Instruction can be checked by clicking the right mouse button after selecting the event or the site from the list in the Emergency Event panel e Change Select the group or site you want to
28. gt Once you have given the video clip a file name select Start and press the e button A confirmation screen displaying data size will appear When the storage device does not have enough space the DVR will ask if you want to copy as much of the video clip as possible in the available space Select Continue and press the e button to continue backup Once the backup starts you can cancel it by selecting Stop or hide the screen by selecting Close When selecting Close Backup continues and a confirmation screen displays when complete NOTE The file size for backup is limited to 2GB You can use other functions on the DVR while video is being copied To do this select Close and press the e button You can return to the Backup screen at any time to check the progress You do not need to install any special software on your personal computer to review the video clips Refer to the REVO Remote Pro manual for instructions on how to review video clips you have copied NOTE During Backup you cannot shut the system down clear data on the storage device or format the storage device CAUTION Do NOT disconnect the USB flash drive from the DVR while backing up video REVO REMOTE REVO Remote allows you to access a remote DVR monitor live video images and search recorded video using Internet Explorer web browser anytime from virtually anywhere Computer system requirements for using the REVO Remote program are e Operating Sys
29. i RemoteSite3 04 17 2008 05 26 57 PM u Watch Event View T ent View Cc Ready 3 1 SCREEN The Screen displays images from selected cameras in the live monitoring or playback modes REVO Remote Pro provides various multi screen layouts single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 8x8 and full screen User s Manual NOTE There might be a problem with screen display or screen update due to low image transmission speed when using Microsoft Windows Vista or later operating system In this situation it is recommended that you disable the Auto Tuning capability of your computer Run the Command Prompt with elevated administrator permissions Go to the Start Menu Accessories Command Prompt Click the right mouse button and select the Run as administrator option Then enter netsh int tcp set global autotuninglevel disable and click the OK button Restart your computer to apply the changes If you want to enable the Auto Tuning capability again enter netsh int tcp set global autotuninglevel normal after running the Command Prompt with elevated administrator permissions Restart your computer to apply the changes 3 2 PANEL REVO Remote Pro has many powerful tools that can be used to streamline your work Most of the tools are located on 12 docking panels that can be placed on the screen where they are most convenient You can keep your screen free of clutter by displaying only the panels you
30. image v NOTE A camera name change in the Web Search mode does not affect the camera name set up on the remote site Leaving the Camera Title blank causes the camera name set up on the remote site to display 40 16 Channel Digital Video Recorder Appendix ERROR CODE NOTICES SYSTEM UPGRADE RELATED Description BACKUP RELATED Description Unknown error nknown error File version error Device error Operating system version error Mounting failed Software version error File already existed Kernel version error Not enough space OO RI Upgrade device mounting failed Creating temporary file failed O ackage is not found pening disk failed N rj Extracting package failed ILO failed ebooting failed ormatting disk failed O oO atabase has been changed ppending failed O al nvalid package ad sector w Z emote connection failed o executable file emote network error za pening executable file failed Remote upgrade is not authorized riting executable file failed Saving remote package failed reating image failed Remote upgrade is cancelled by the user A 400 USB device mounting fae Oo OSS 401 Reading upgrade package on the USB device led 402 Copying upgrade package on the USB device failed 500 System is busy clipcopying SPOS GD OjJjojo WIN ye any rs O oO g TROUBLESHOOTING
31. mode exits the Active Cameo mode You also can exit the Active Cameo mode by clicking right mouse button and selecting Exit Group Edit in the menu The active cameo mode will remains in effect for 15 seconds if there is no further operation In active cameo mode press the camera button on the remote control for the camera you want displayed as active cameo After setting the camera number to active cameo the DVR moves the active cameo to the next cameo You can use this method to change the screen layout in this way PTZ MODE In the Live Monitoring mode press the MENU button on the remote control or move the mouse pointer to the top of the screen to display the E Camera Menu icon on the screen Selecting PTZ and choosing the camera number from the Camera Menu enters the PTZ mode Only camera numbers that are set up for PTZ control during Camera setup can be selected in the list To exit the PTZ mode select the Exit icon at the top of the screen displayed by pressing the MENU button while in the PTZ mode You also can enter the PTZ mode by pressing the PTZ button and selecting the camera button on the remote control and exit the PTZ mode by pressing the button again While in the PTZ mode the icon flickers on the PTZ camera screen if PTZ is selected in the Display setup screen OSD tab Press the Left and Right arrow buttons on the remote control to pan left and right and press the Up and Down arrow buttons to tilt the camera up and down
32. one remote site and displays images from selected cameras Clicking the button during sequence monitoring releases sequence monitoring and maintains the current connection For sequence monitoring to function the sequence sites should be registered during System setup Refer to 3 3 Menu System Menu for details on configuring the sequence site NOTE While in the sequence monitoring mode you cannot manually connect to sites by dragging and dropping with the mouse PTZ Control Mine Gotten Select a PTZ camera at the remote site and control pan tilt and zoom Only the administrator can control PTZ at REVO Remote Pro The P icon will display on each camera screen when PTZ can be controlled remotely NOTE Control features of the Advanced menu will be enabled when a camera connected to a DVR supports PTZ features such as Speed Auto x Pan Tour etc and the DVR supports remote PTZ control Depending on the specifications of the PTZ camera some features of the Advanced lols eee menu may not be active rove orien NOTE Using the mouse for PTZ control is supported Click the left sb s set preset mouse button on the image and move that image in the direction you Focus near far Iris close open want to by dragging the mouse Use the mouse wheel to zoom in and out Color Control a E Adjust the brightness contrast saturation and hue of live video for each camera by POA clicking the target icons on the Color Control panel Clic
33. required for REVO Remote Pro to initiate RE YO Remote Pro Installing REVO Remote Pro Click Finish to exit Setup Y Install MSXML 9 Click Next 13 MSXML 4 0 SP2 Parser and SDK Setup Welcome to the MSXML 4 0 SP2 Parser and SDK Setup Wizard The Setup Wizard will install MSXML 4 0 SP2 Parser and SDK on your computer Click Next to continue or Cancel to exit the Setup Wizard 13 MSXML 4 0 SP2 Parser and SDK License Agreement End User License Agreement Please read the following license agreement carefully END USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE MICROSOFT XML CORE SERVICES MSXML 4 0 IMPORTANT READ CAREFULLY This Microsoft End User License Agreement EULA is a legal agreernent between you either an indrvidual or a single entity and Microsoft Corporation for the Microsoft software identified above which may include computer software associated media printed materials and online or electronic documentation SOFTWARE By davemlandina imatalline arm av athawrnas saina tha CACTI ADT O 1 do not accept the terms in the License Agreement User s Manual 11 Enter User Name and Organization and click Next i MSXML 4 0 SP2 Parser and SDK Setup Customer Information Please enter your customer information User Name Organization ee ooo 12 Select Install Now i MSXML 4 0 SP2 Parser and SDK Setup Choose Setup Type Choose the setup type that b
34. segment and saves it see below for more details Zoom A Zoom Zooms the current playback image e Slow Play Plays video at low speed x1 2 x1 3 x1 4 x1 6 and x1 8 NOTE Playing video at low speed will be supported for video recorded 10 images or more per second Selecting in the top left corner exits the Record Table Search screen Motion Search Motion Search can be selected from the Search menu while the DVR displays the camera full screen The Motion Search EDO TTA screen displays a list of motion events Use the arrow buttons 2 05 04 2010 10 46 18 AM to highlight the event for which you would like to see video and press the button to display the video associated with the selected event in the small search screen Selecting Close and pressing the e button will extract the video associated with the Motion event and display the first image of the event Pressing the Play Pause button on the remote control button will start playing the event video segment If you want to return to live monitoring press the MENU button on the remote control and select the 91 Exit icon at the top of the screen 05 04 2010 10 46 18 AM You also can narrow your event search by selecting Option and setting up new search conditions on Seach Opler e From Pressing the e button toggles between On and Off When From E First set to Off you can enter a specific Date and Time When set to On ee Last the search will be f
35. time lapse search mode searches for recorded data by time and then plays back images found within the time parameters The event search mode searches for event log entries using specific conditions and plays back the images associated with those event entries These two modes have different panel configurations and search methods NOTE Using both search modes at the same time is NOT possible 31 User s Manual Time Lapse Search Click the HE button on the Search View panel to enter the time lapse search mode Selecting a date from the calendar initiates the time lapse search The dates for which recorded images are available are enabled When first entering the time lapse search the latest date with recorded images will be selected highlighted in the calendar Click the Reload button to reload the date information Recorded information available from the selected date will be displayed on the timetable The recorded data are displayed by time and bar shaped segments indicate there are recorded data during that time Select a specific hour by clicking the mouse on the desired hour segment S r 1 0 AY DA NNI gt gt MA a 209 Y e 2009 07 09 2009 07 10 A i 2009 7 21 0 22 00 23 00 01 00 02 00 03 00 04 00 0 rm 5 6 78 9 1011 12 13 141516 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ID CAM4 v The recorded data of each camera channel are displayed by time in one minute segments and a red
36. to 9 are also used to enter passwords SEQUENCE Button When in the Live Monitoring mode pressing the SEQUENCE button displays live channels sequentially FREEZE Button Pressing the FREEZE button freezes the current live screen 16 Channel Digital Video Recorder Up Down Left Right Arrow Buttons These buttons are used to navigate through menus and items displayed in the Live Monitoring or Search screens They are also used to navigate through menus and GUI during the system setup You also can use them to change numbers by highlighting a number in a menu and using the Up and Down arrow buttons to increase or decrease the number s value The arrow buttons are also used to control Pan and Tilt when in the PTZ mode When in the PIP display format pressing the Up and Down arrow buttons moves the position of the small screen counter clockwise and clockwise Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode MENU Button In the Live Monitoring mode and Search mode pressing the MENU button displays the menu icons at the top of the screen Pressing the button also hides the menu icons During menu setup pressing the button closes the current menu or setup dialog box Playback Buttons e Rewind Pressing the L44 button plays video backward at high speed Pressing the button again toggles the playback speed from 44 dd and 4444 e Play Pause Pressing the 4 button plays ba
37. vertical line indicates the selected time that will be played back The color of the bar indicates different types of recording Yellow for Pre event Purple for Event and Blue for Time lapse Ifthe DVR has more than one video segment in the same time range each segment will be separated by a yellow vertical line To view an image from a specific time click the Go To button and set up the date and time to search Event Search ARRE NKI gt Pa as Date Time ad Q A i RemoteSite3 ES CAM12 04 16 2008 08 34 41 PM i RemoteSite3 ES CAM16 04 16 2008 08 34 30 PM i RemoteSite3 ES CAmi5 04 16 2008 08 34 23 PM i Remotesite3 ES CAM12 04 16 2008 08 34 23 PM i RemoteSite3 ES CAMIS 04 16 2008 08 34 09 PM i JRemoteSite3 ES CAM12 04 16 2008 08 34 09 PM i RemoteSite3 ES CAM13 04 16 2008 08 34 07 PM Click the 2 button on the Search View panel to enter the event search mode First click the E button and set up the search condition in the following Event Search dialog box Event Search Event Text In 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 All 32 Y Recorder Bad X Alarm In Bad M Disk Bad Disk Temperature Disk S M A R T Disk Almost Full Panic Record Fan Error REVO Remote Pro Remote Administration System Event Search Event Text In piis To Last M r SES 7 SA SH DS AS Name Comp Value Column Line vi 0 o
38. 007 12 11 08 50 42 AM 2007 12 11 08 50 41 AM 2007 12 11 08 50 40 AM 2007 12 11 08 50 39 AM 2007 12 11 08 50 38 AM v Close Move Buttons Moves to the first page lt previous page lt next page _ or last page gt 1 You can go directly to a log page by clicking the page number button Close Closes the Log dialog box REVO Remote Pro Remote Administration System Favorite Menu REVO Remote Pro hg Save Current Screen to Favorite Sites NOTE The Favorite menu can also be accessed using the toolbar controls Saves the current screen layout directly to the Favorite site Sequence Menu REVO Remote Pro MPAA st 1d Y O HH LA ER ES ee E Auto Sequence On Auto Sequence Off NOTE The Sequence menu can also be accessed using the toolbar controls Starts or ends auto sequencing Watch Screen Only Clicking Auto Sequencing On allows you to select a desired Auto Sequencing group Record Menu REVO Remote Pro Panic Recording On Panic Recording Off gt Record Play NOTE The Record menu can also be accessed using the toolbar controls Starts or ends panic recording Selecting Record Play initiates the RecordPlayer program and plays recorded video Refer to 4 4 Panic Recording for more details Image Menu REVO Remote Pro CAES e IMD eS Save En Print NOTE The Image menu can also be accessed using the toolbar controls e
39. 18 19 20 21 22 23 24 25 26 27 28 29 30 1 Click the E icon to log out of the REVO Remote program Click the Ed icon to access the web monitoring mode 3 Position the mouse pointer on the Remote Search logo to see the version of the REVO Remote program 4 The DVR information window displays the time information of recorded data on the remote DVR and login information of REVO Remote 39 User s Manual Click the A icon to blur sharpen equalize and interpolate playback images Click the 55 icons Blur to zoom out or zoom in the recorded image Click the 224 icons to adjust the brightness of the Shaman Equalize recorded images Interpolation NOTE Image processing works only in the pause mode a 6 The playback function buttons include fast backward pause play fast forward go to the first image go to the previous image go to the next image and got to the last image 1 Click the screen format to select the desired display mode Click the Bl icon to enter the time lapse search mode which allows you to search for recorded data hour by time and then play back images found within the time parameters The Timetable window minute located at the bottom displays the time information for the image of the date selected on the calendar second If there is more than one video stream in the same time range you can select the video stream you Go To Cancel want to search Clicking a s
40. 20 change the Auto Sequencing settings of a group or delete the group by using the popup menu displayed by selecting the Auto Sequencing group and clicking the right mouse button e Add Select the site to add from the Group List and click the Add button Select an Auto Sequencing group to add the site from the popup menu displayed by clicking the button e Add All Adds all sites in the Group List to the Auto Sequencing list Select an Auto Sequencing group to add all sites from the popup menu displayed by clicking the button e Remove Select the site to remove from the Auto Sequencing list and click the Remove button e Remove All Removes all sites in the Auto Sequencing list NOTE The Auto Sequencing list is not valid with modem connections Load Setup File Allows applying the settings of the System Setup menu saved as a xml file format to the REVO Remote Pro system Loading the setup file can also be performed by clicking the la button on the toolbar 20 REVO Remote Pro Remote Administration System Save Setup File Allows saving the current settings of the System Setup menu as a xml file format Saving the setup file can also be performed by clicking the la button on the toolbar Batch Job Setup Multiple remote sites can be upgraded or set up using the Batch Job Setup screen BatchJob Setup Upgrade Setup Group List Upgrade Sites 7 oa SA Remotesites E3 RemoteSitel E RemoteSite2 E3 RemoteSit
41. 3 3 Menu Remote Menu for more details The Favorite Sites panel displays the list of Favorite sites registered during REVO Remote Pro System setup Selecting the Favorite site you want to connect to from the list and then dragging and dropping it in the desired position on the screen connects all remote sites registered in the Favorite site automatically The Map panel allows efficient monitoring of the remote sites by displaying a map of the selectable site Click the right mouse button on the map panel to select the map image file rmp you want to monitor from the list The selected map image displays in the Map panel and the sites registered on the map image file will be connected When the selected map is linked with sub maps clicking the linked image moves to the sub map NOTE Refer to Appendix Map Editor for details on editing maps User s Manual x 0 25 e x0 25 to x2 Sets the desired size of the Map popup screen x05 e Full Screen Enters the full screen mode of the Map popup screen x 0 75 hee Y x1 initial size e Transparency Adjusts the transparency of the popup screen x 1 25 e PTZ Set Controls pan tilt and zoom of the selected PTZ camera x qu e Disable Time Out Continues displaying the popup screen when events are detected by disabling the dwell time out PROA Original Ratio Displays the Map popup screen by matching its original aspect ratio Tannen Anti Aliasing Screen Enhances image display qu
42. 5 REVO Remote Pro provides multiple screen layout for playback The available formats are single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 and 8x8 and full screen When in one of the multi view formats clicking the MEl or button will move to the previous or next page To view a specific image in the single screen mode move the cursor to that image and double click the left mouse button To return to the previous screen mode from the single screen mode double click the left mouse button in the playback window Clicking Eh Layout Load will apply the selected frame layout to REVO Remote Pro and clicking 94 Layout Setup allows you to set up the user defined frame layout 33 User s Manual Image Processing The Image Processing panel allows enhancing played back images using processing controls L Blurs the image LA Sharpens the image ttt Equalizes the image l Reduces the alias effect that occurs when using the zoom function Reloads the original image Playing Recorded Audio REVO Remote Pro will play audio when it is in the single screen layout while playing back recorded video that has recorded audio Audio playback can be On or Off by selecting Enable Audio from the menu displayed by clicking the right mouse button on the screen NOTE Audio might be interrupted during playback because of network conditions and your PC s performance Save Clicking the EH button on the Search View panel saves recor
43. AND searches for logs satisfying all conditions Selecting OR searches for logs satisfying at least one of the conditions e Search Displays log entries satisfying the preset search filter e Reset Resets the search filter File dE e Log File Open Opens a log file db Log File Open e Delete Log Deletes logs older than a certain age e Save As Saves the log information in the list as a text txt or CSV csv file Delete Log i i e Print Prints the log information Save s e Close Closes the Log Viewer screen Print Close Exit Disconnects all current connections and exits REVO Remote Pro program 23 User s Manual View Menu REVO Remote Pro Toolbar gt CHH LE ES ES e Site Panel gt Control Panel gt Watch Event View Panel BR Emergency Event View Panel Era d Search View Panel Report View Panel IM Status View Panel al Ea Displays or closes the toolbar and panels Remote Menu REVO Remote Pro 5 Remote Setup JUE LB ES ES e EE Remote System Log Remote Event Log NOTE The Remote menu can also be activated by clicking the right mouse button after selecting the remote site on the Remote Sites panel Remote Setup Remote Setup can be used to change the setup of a remote DVR Select the remote site on the Remote Sites panel initiate the Remote Setup menu and the setup screen displays NOTE Refer to the user manual for the remote DVR for more de
44. DEO Signal Format NTSC Video Input 8 RJ 12 and 8 BNC inputs 1 Vp p auto terminating 75 Ohms E Composite One RCA 1 Vp p 75 Ohms Monitor Outputs VGA One ah entire Han Composite 720x480 VGA 800x600 60Hz 1024x768 60Hz 1280x1024 60Hz Playback Record Speed images per second A 80dB at 10cm 10 100 Base Ethernet RJ 12 Input 8 Line In RCA Output 1 Line Out 1 Remote Control CONNECTORS Video Input 8 RJ 12 12V rra Max 310mA and 8 BNC Composite 1 RCA Monitor Output VGA 1 DB15 Audio In RJ 12 connector Audio Out 1 RCA connector STORAGE Primary Storage SATA hard disk drive Backup Storage USB flash drive 11 8 x 2 4 x 9 1 300mm x 62mm x 231mm Shipping Dimensions ji i i WxHxD 14 2 x 4 3 x 18 1 360mm x 110mm x 460mm Operating Temperature 41 F to 104 F 5 C to 40 C Operating Humidity 0 to 90 DVR 12V tr 2A Adaptor 100 240 VAC 50 60Hz 1 5A 12V rr SA Camera 12V tra 2 5A Adaptor 100 240 VAC 50 60Hz 1 5A 12V rra SA Approval Specifications are subject to change without notice Power V1 0 43 REVO Remote Pro DIGITAL VIDEO RECORDER Remote Administration System USER S MANUAL REVO MOBILE www revoamerica com 1 866 625 REVO 7386 REVO Remote Pro Remote Administration System Table of Contents Chapter 1 OVErVICW ccccccsccccseccccenceceesceseeeeeceaececeaeesseacessaeeeseeeessaeeessgeeeseaeeees 1 Tet INS Mana sk 1 2 Netconn Feature
45. DVRNS OFF Login User ID user gt Password gt Monitoring Touch the Connect button to connect to a DVR for monitoring Selecting the DVR from the site list displays the video from the DVR on the screen iPod gt 10 10 AM iPod gt 10 10 AM REVO Mobile CAM1 at RemoteSite1 Connect Camera Settings 7 Disconnect Camera e Disconnect Touch to release the connection to the DVR e Camera Touch to select the camera to monitor The list of cameras supported by the DVR is displayed Selecting a desired camera from the list and touching the Apply button displays video from the selected camera NOTE The remote connection might fail if the DVR uses the SSL function Refer to the user manual of the remote DVR for details about the SSL function V1 0 51
46. DVRNS Server Register the unit name and IP address of the DVR during the DVRNS setup on the Remote DVR This unit name and IP address will be registered on the DVRNS server directly NOTE Refer to the applicable manual for each remote DVR for more details on DVRNS setup STEP 2 REVO Remote Pro gt DVRNS Server Request the IP address of the remote DVR using the registered unit name of the DVR you want to connect to STEP 3 DVRNS Server gt REVO Remote Pro The DVRNS server notifies REVO Remote Pro of the requested IP address STEP 4 REVO Remote Pro gt DVR Connect to the target DVR using the IP address returned from the DVRNS server NOTE You should follow steps 2 to 4 whenever connecting to the remote site because the DVR name and IP address might change at anytime MAP EDITOR The Map Editor program allows you to create maps of remote sites With the drag and drop and link function you can create and edit the map easily and efficiently Run the program by selecting MapEditor from the REVO Remote Pro options under the Start menu in Windows 41 User s Manual en Untitled Map Editor File Edit View Option Help A ES a 0 o 0 og A Property Bar x Comes alamo nemin E General Name noname Horizontal 800 Vertical 600 Position Left Top Camera left Camera right E j gt Event Canvas Camera top Camera
47. EeE_ a QUT OF SIGHT PEACE OF MIND Err A DIGITAL VIDEO RECORDER 16 Channel USER S MANUAL www revoamerica com 1 866 625 REVO 7386 16 Channel Digital Video Recorder WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance COMPLIANCE NOTICE OF FCC THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE
48. M A R T monitoring is not working or supported NOTE When the S M A R T displays Bad the screen displays a message box Once the message box appears replacing the hard disk drive is recommended usually within 24 hours e Recorded Data Displays the time information about recorded data on the drive Selecting Clear All Data will clear all video data except the system log When the hard disk drive has not been formatted the Clear All Data button changes to the Format button which is used to format the hard disk drive NETWORK SETUP General Settings NETWORK gt General Tab e Transfer Speed Set the transfer speed and select the unit of measure for the transfer speed between bps bits General Network BYRNS RTSP Mail per second and ips images per second __ D Quality Select the quality of the transferred image e cere eS NOTE The local recording speed might be affected by various network bandwidth Transfer Speed conditions Transfer Speed Quality Resolution Remote Audio Channel E Enable SSL for Transferring Data ar ee Ras hones cone NOTE The higher Quality settings require higher Port 12001 14000 Transfer Speed settings The transfer speed you set is the maximum speed Depending on the network Mac Address 00 03 22 00 00 00 environment this speed may not be achieved Cancel e Remote Audio Channel The DVR supports remote audio communication between a PC running REVO Remote Pro or REVO
49. PROBLEM POSSIBLE SOLUTION No Power e Check power cord connections e Confirm that there is power at the outlet e Check camera video cable and connections e Check monitor video cable and connections e Confirm that the camera has power e Check camera lens settings No Live Video If hard disk drive is full you will either need to delete video or set the DVR to the Recycle DVR has stopped recording On Recycle When Disk Full Mode See Chapter 2 Installation Configuration Advanced Setup Record Setup for details When the DVR is in the Pre Event recording mode the yellow amp and icons display when there is no event and the DVR is not recording The red and icons display when any event occurs and the DVR starts recording The icon displays however the DVR is not recording e Check the batteries in the remote control IR remote control does not e Check that nothing blocks the infrared sensor on the DVR work properly e Check the system ID setting for the remote control See Chapter 2 Installation amp Configuration Advanced Setup System Setup for details 41 User s Manual MAP OF SCREENS ADVNACED SETUP MENU System System Date Time Storage Network General Network DVRNS RTSP Camera Record Settings Panic Record Schedule Event Motion Alarm In System Display OSD Main Monitor VGA 42 16 Channel Digital Video Recorder SPECIFICATIONS VI
50. R settings connect a USB flash drive containing the setup file to the DVR and select the desired setup file Checking the Include Network Setup box changes the network settings Export To save the current DVR settings in dat file format connect a USB flash drive to the DVR and enter a file name for the settings Setup Import Select a setup file Setup Export File name File name Ml Include Network Setup Cancel Cancel NOTE Even after changing the DVR settings by importing saved settings the time related settings Date Time Time Zone and Daylight Saving Time will NOT be changed N CAUTION The USB device must be FAT16 or FAT32 format 13 User s Manual e Show System Log Displays the system logs up to 5 000 from the latest The icon will be displayed in the last column for system activities of remote sites 05 31 2010 12 08 56 PM Setup Begin 05 31 2010 12 08 55 PM Panic Off 05 31 2010 12 08 54 PM Panic On 05 31 2010 12 08 51 PM Setup End 05 31 2010 12 08 34 PM Setup Change Alarm In 05 31 2010 12 08 04 PM Setup Change Network 05 31 2010 12 07 52 PM Setup Begin 05 31 2010 12 07 51 PM Setup Change User 05 31 2010 12 07 50 PM Login admin 05 31 2010 12 07 40 PM Setup Change Record Close Setup Begin Clear All Data Local Time Change Local e Change Password Changes the password e System Shutdown Shuts the system down Password gt 7 Are you sure you want to
51. Remote and a local system Select the audio channel that sends audio to the remote site Selecting Select From REVO Remote will send audio of the channel selected from REVO Remote Pro or REVO Remote NOTE Depending on network conditions audio might be interrupted or out of synchronization during transmission e Enable SSL for Transferring Data Selecting the box turns the SSL Secure Sockets Layer authentication On When it is On the security of data except video transmitted for remote monitoring or remote recording can be enhanced by using the SSL Secure Sockets Layer authentication When using the SSL function the DVR cannot be connected with a remote program or a network keyboard which does not support the SSL function CAUTION The remote connection will be disconnected temporarily after changing the SSL settings 15 User s Manual NOTE This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org e Use REVO Remote Service Selecting the box turns the REVO Remote service On Select the port number used when accessing REVO Remote See Appendix REVO Remote for details e Mac Address Displays the MAC Media Access Control address of the DVR Network Settings NETWORK gt Network Tab General Network DYRNS RTSP El Type Manual ooo IP Address Gateway Subnet Mask DNS Server E Use UPnP General Network DVRNS RTSP Mail Type DHCP DNS
52. Save Saves the current image as a bitmap bmp or JPEG jpg file e Print Prints the current image NOTE Refer to 4 1 Live Monitoring and 4 2 Playback and Search for more details 25 User s Manual Layout Menu Screen Layout gt Frame Layout NOTE The Layout menu can also be accessed using the toolbar controls Screen Layout MO O o Select the desired screen layout using the layout toolbar When changing Frame Layout RE Previous Cameras FB Layout 2x2 the screen layout the selected camera on the current screen will be Next Cameras LE Layout 8 located in the first cell of the new layout When in one of the multi view ES FullScreen Es formats selecting Previous Cameras or Next Cameras will move to me E the previous or next page In other words when viewing Cameras 1 to 4 Ba Layout 32 in the quad format selecting Previous Cameras will display Cameras BS Layout 6x6 61 to 64 and selecting Next Cameras will display Cameras 5 to 8 eee a Selecting Full Screen enters the full screen mode To return to the previous screen mode press the Esc key on the keyboard or select FullScreen Close x from the popup menu displayed by clicking the right mouse button Frame Layout SereenLaout gt l os ta ga Layout Load Select the desired frame layout and click the Load button to apply the E Layout Load selected frame layout to REVO Remote Pro BB Layout Setup e
53. To connect a remote site on the Watch screen select the site or camera you want to connect to in the Remote Site Favorite Sites or Map panel and then drag and drop it in the desired position on the screen The gga icon will be displayed on each Watch screen To disconnect the current connection select the site or camera you want to disconnect to in the Remote Sites Favorite Sites or Map panel or on the screen and then click the E button on the toolbar or select Disconnect from the System drop down menu NOTE When selecting the display option of Watch and Search Screen during System setup the remote site can also be set to connect using the right or left mouse buttons This is WatehScreen user defined and must be set during System setup Select Watch Screen to connect to Search Screen the selected site on the Watch screen when the text menu screen appears Screen Layout and Frame Layout HH HH ls 32 36 ja 64 m ME Eh i E REVO Remote Pro provides multiple screen layout options The formats available are single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 8x8 and full screen When in one of the multi view formats clicking the MB or BM button will move to the previous or next page To view a specific image in the single screen mode move the cursor to that image and double click the left mouse button To return to the previous screen mode from the single screen mode double click the left mouse button in the monitoring window
54. VRNS settings and remote connection e Change Select the site you want to change and click the Change button and then edit the site information e Remove Select the site you want to remove and click the Remove button e DVRNS Click the DVRNS button to set up the DVRNS function and the DVR Name Service screen is displayed Enter the DVRNS server s IP address and port number The IP address and port number you enter should match the values set during the DVRNS setup on the remote DVR you want to connect to e Connect Select the site you want to connect to and click the Connect button Once you connect to the remote site the live video of camera displays If the connection fails the error message will be displayed in the Status Information box e Add Click the button to add the remote site Site Name Enter a site name Up to 32 characters may be used for the site names IP Address Enter the IP address of the remote site Watch Port Set up the port number of the Watch program The IP port number of Watch Remote Sites Site1 203 238 93 3 Off ibe Site Name Site1 IP Address 203 238 93 3 Watch Port 8016 use ovens Port should match the value set during the network setup of the remote DVR vols Use DVRNS Select whether or not to use the DVRNS function When using the DVRNS aa function you can enter the remote site s name registered on the DVRNS server instead of
55. acturer as such additions may result in the risk of fire electric shock or other personal injury 5 Water and or Moisture Do not use this equipment near water or in contact with water 6 Placing and Accessories Do not place this equipment on an unstable cart stand or table The equipment may fall causing serious injury to a child or adult and serious damage to the equipment q ud lt This equipment and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the equipment and cart combination to overturn 7 Power Sources This equipment should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power please consult your equipment dealer or local power company 8 Power Cords Operator or installer must remove power and TNT connections before handling the equipment 9 Lightning For added protection for this equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the equipment due to lightning and power line surges 10 Overloading Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 11 Objects and Liquids Never push objects of any kind through openings of this equipment as they may touch dangerous voltage poin
56. ade for the cameras currently not displayed on the Watch screen even though they are set up to be recorded 15 User s Manual NOTE When selecting the User Assignment Setup mode the user can assign camera channels to record manually on the Watch screen Select a camera on the Watch screen and click the right mouse button then select Set Record Camera in the text menu screen The gray fl icon displays on the selected camera screen System 1 System 2 Remote Sites Favorite Sites Sequence Sites Dial up Network Security Option Verify Password _ Before Setup C Before Startup _ Before Shutdown Network Option Callback IP Port Number 8201 8000 12000 Event Setup Report Setup Report Use LJ Use Report Report Check Interval 1 1 24 hours DVR Name Service Server IP Address www revodvr com Server IP Port Number 10088 10000 12000 default 10088 Startup Settings Reselect Language on Next Startup C Automatically Run REVO Remote Pro When to Log on to Windows System 2 Set up the modem connection information for remote access system password network option report function and DVRNS server e Dial up Network Select Use modem if you want to use a modem for remote access e Security Options Designate whether password confirmation is required Before setup Before startup or Before shutdown of REVO Remote Pro Click the Change button to change the password e Network Option Set up t
57. ality on the popup screen by smoothing stair stepping aliasing effects in the enlarged image e User Set Sets the msde of the current popup screens displayed on the monitor For example x2 Disable Time Cut Y pr ee the monitor displays the current popup screen with enough frames for 16 cameras when you ntr Alasing screen User Set select 4x4 NOTE Refer to Appendix Map Editor Device Setting section for more details about the popup function To connect to the remote site select the device you want to connect to from the Map panel and then drag and drop it in the desired position on the screen or the Status View panel Also placing the mouse cursor on the device on the map displays the device status When the device detects any event or the device is not working properly the following status icons appear maximum of 4 Unplugged cy Event Off O Irregular FE Video Loss es Video Blind Motion ID Alarm In Alarm Out NOTE The device status is displayed as Irregular based on to the system check settings and as each event according to the event detection settings on the remote DVR NOTE Some event icons may not be supported depending on the specifications and version of the remote DVR Clicking the right mouse button on the Map panel causes a text menu screen to display Selecting Watch Event View from the menu displays the event information of the connected remote sites Selecting Close disconnects the current connec
58. cally NOTE Selecting Auto will only be enabled when the DVR is configured for DHCP network e Port Number Setup Set the port number of each remote software related Port Number Setup 8000 12000 program Remote Admin Remote Watch NOTE You will need to get the appropriate Port Numbers for each remote Remote Search software related program from your network administrator Do NOT use the Remote Audio same port number for two different programs otherwise the DVR cannot be connected with the PC running REVO Remote Pro or REVO Remote CAUTION When changing the port settings you must change the port settings on the PC running REVO Remote Pro 16 16 Channel Digital Video Recorder Use UPnP Check the box when using the UPnP Universal Plug and Play service When using the UPnP service port forwarding from the NAT Network Address Translation device to the DVR will be enabled automatically via UPnP service This function will be used especially when accessing to a port on a private IP address Checking the Status box displays the port numbers forwarded from the NAT device via UPnP service NOTE For the UPnP service to work the NAT device should support the UPnP Port Forwarding function and the function should be set to enabled NOTE You cannot change the port settings when Use UPnP is On DVRNS Settings NETWORK gt DVRNS Tab NOTE The DVRNS DVR Name Service allows you to connect to the DVR via interne
59. cessor ARMv4 Core compatible processor e Display 240x240 pixel 320x240 pixel or 640x480 pixel e Memory 4MB of storage memory 96MB or more of RAM e Wireless LAN Support IEEE 802 11 e Input Device Touch screen e Desktop PC Microsoft Windows 2000 Sever 2003 XP with Microsoft ActiveSync 4 5 or above Vista 7 with Microsoft Windows Mobile Device Center 6 1 or above System Diagram PDA DVR _ x sevccee NETWORK are ore Lo Ma Installation 1 Install the Microsoft ActiveSync program on the PC and connect the PDA to the PC 2 Run the REVO Mobile Setup exe file 3 When the following dialog box appears click Next REVYO Mobile Pocket PC installation REVO Mobile will be installed on your Pocket PC now README for REVO Mobile 3 1 0 for Windows Mobile Copyright 2010 Revo America Inc All rights reserved SYSTEM REQUIREMENTS Operating System Microsoft Windows Mobile 5 or above Processor ARMv4 Core compatible processor Display 240x240 pixel 320x240 pixel or 640x480 pixel Memory 4MB of storage memory 96MB of RAM or more Desktop PC Microsoft Windows 2000 Sever 2003 lt P with Microsoft ActiveSync 4 5 or above Vista with Microsoft Windows Mobile Device Center 6 1 or above IMPORTANT NOTE Program Shortcut Location Start Menu REVO Mobile 3 1 0 i Cancel 4 The progress bar shows the installation progress Installing Applications Installing
60. change and click the Change button or double click the group or the site to change Then edit the site information e Remove Select the group or site you want to remove and click the Remove button e List All Displays all registered remote sites e Find Enter the group name or site name to search for and click the Find button to display the matching groups or sites in the list 18 REVO Remote Pro Remote Administration System System 1 System 2 Remote Sites Favorite Sites Sequence Sites Favorites Auto Conmect O Connect Favorite Site at Startup 53 Group List Favorites Y RemoteSites W Camt MWCam2 MCam3 WCam4 Cams MMCame WCam vCam8 E RemoteSite1 E RemoteSite2 E RemoteSite3 DW Cam10 pacamt1 McCan MaCam13 cams cams came Remove Selected Camera Remove All Cameras Favorite Site The Favorite Site is a user defined connection list that combines more than one remote site so multiple sites can be monitored at the same time with a single connection Add a new Favorite Site and define it by dragging and dropping sites and or cameras to the Favorites map Up to 64 cameras can be monitored at a time when each camera is assigned to its own position on the Favorites map e Favorites Site Name Select a registered Favorite site from the drop down list ADD Adds a new Favorite site Clicking the button displays the Favorites dialog box Enter the name of the Favorite si
61. ck video at regular speed The screen displays when the DVR is in the Pause mode and the screen displays gt when the DVR is playing back video e Fast Forward Pressing the gt button plays video forward at high speed Pressing the button again toggles the playback speed from PP gt gt gt and PPP e Stop Pressing the IM button stops playback and enters the Live Monitoring mode e Backward When in the pause mode pressing the 41 button moves to the previous image e Forward When in the pause mode pressing the button moves to the next image In the Live Monitoring mode pressing any playback button enters to the Search mode PANIC Button Pressing the PANIC button starts panic recoding of all camera channels and displays Y on the screen Pressing the button again will stop panic recording LAYOUT Button Pressing the LAYOUT button toggles between different display formats The available formats are 4x4 3x3 2x2 and PIP ZOOM Button Pressing the ZOOM button zooms the current image on the screen A PIP with a rectangle temporarily displays showing what area of the screen has been enlarged You can use the arrow buttons to move the rectangle to another area PTZ Button Pressing the PTZ button enters the PTZ Pan Tilt Zoom mode which allows you to control properly configured cameras Enter Button The Enter button selects a highlighted item or completes an entry that you have made during system setup This bu
62. d supply wiring Appropriate consideration of equipment nameplate ratings should be used when addressing this concern 23 Reliable Earthing Grounding Reliable grounding of rack mounted equipment should be maintained Particular attention should be given to supply connections other than direct connections to the branch circuit e g use of power strips WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal 16 Channel Digital Video Recorder Table of Contents Chapter l TAUPO GUC ON diia 1 Be NU IMM EEE errs ass etc eee as ec eee me cee cee eae eect a
63. ded video Save Type Save As Self Player Save As Video e Save As Self Player Saves any video clip of recorded data as an executable file Set up the save parameters in the following dialog box Click the Start button and select Save in Enter a File name and then select Save as type exe for the video you are saving Then click the Save button NOTE When the data file reaches 2GB you will be asked to continue saving by creating multiple files in 2GB units 11 16 2008 _ Sl 10 43 16 If you do not want to be asked select Don t ask about file 11 18 2008 2 10 43 18 limit Save As Self Player C Save Password Don t ask about file limit C Include Text In Data AS 4 S G 7 8 9 10 11 12 13 14 15 16 Camera Progress Save As Self Player can be performed by using the button on the Search View panel Selecting the desired time on the timetable and clicking the button sets the starting date From and selecting another time and clicking the button again sets the ending time To e Save As Video Saves any video clip of recorded data in an AVI Audio Video Interleaved file format Set up the save parameters in the following dialog box Click the Start button and then set the file name Clicking the Save button starts saving video 34 Save As Video 10 43 18 To Last 10 43 18 all ee ES bbs El E lm VY ate Gs alge aly alles Camera QOOOOOOOUOOOOO0OO0 C
64. e Property Camera AlarmOut AlarmIn tab and set the device information x General Property Camera E Gema e Name Enter a device name Name e Description Enter description of the device Description e Site Information Select a proper site for the device in the list and the Equipment fields ae cesom User Password IP Address and Port are filled automatically with the information set Ratio 100 in Site Information Setting X Coordinates 203 e Image Select an image of a device Y Coordinates 115 e Ratio Adjust the size of the device image Horizontal 2 e X Coordinates Y Coordinates Adjust the position of the device image by clicking each Equipment field and changing the numbers User e Horizontal Vertical Adjust the size of the device image by clicking each field and changing Password the numbers DVENS Yes e Popup camera If the selected device is an alarm in device you can associate a camera DVRNS with the sensor by entering the camera name The camera name you enter should be the Server Address www revodyr ci same as the camera name entered under the Property Camera tab The Map panel pops Server Port 10088 Mi up another screen and displays images of the camera associated with the sensor on the popup screen when an alarm in event occurs Equipment e IP Address User Password Port Each field is filled in automatically with the information user ID password and port number set in Site Information Setting or you can
65. e arrow buttons on the remote control Freeze E EA 2 Sequence CAMS a a Ene 5 3 Camera Menu aj Aral Alii EA EZRA ee 68 3 2 ee fi tel E Alarm Panic Setup Search Mode Login Logout NOTE The menu icons also can be displayed by moving the mouse pointer to the top of the screen Freeze Selecting the 4 Freeze icon will freeze the current image on the screen until you select Freeze again It is the same as pressing the FREEZE button on the remote control Selecting the Y icon again exits the Freeze mode While in the Freeze mode the 3 icon displays in bottom left corner if Freeze is selected in the Display setup screen OSD tab Sequence Selecting the Fd Sequence icon causes the cameras to display sequentially It is the same as pressing the SEQUENCE button on the remote control When in one of the multiview formats selecting Sequence will cause the DVR to go through predefined screen layouts Full Sequence Or the bottom right screen will display live cameras sequentially Cameo Sequence For example if you select the FJ icon in the 2x2 format the DVR changes pages as follows 1721 518 910 1312 112 12 1012 a 012 2 012 12 1012 314 3 6 314 Full Sequence Cameo Sequence Selecting another display mode or selecting the Fd icon again exits the Sequence mode While in the Sequence mode the icon displays in bottom left corner if Sequence is selected in the Display s
66. e size Options are enabled when the selected camera screen can display images in that size MultiStream Allows to choose the desired stream if the remote DVR is in the multistream mode for live monitoring e Set Record Camera Sets the selected camera channel to be recorded during panic recording Refer to 3 3 Menu System Menu for details on configuring camera channels for panic recording e Deinterlacing Enhances image display quality of interlaced video on the screen by eliminating horizontal scan lines or noise in areas with motion Anti Aliasing Screen Enhances image display quality for all cameras on the screen by eliminating stair stepping aliasing effects in the enlarged image e Disconnect Camera Disconnects a camera on the screen Disconnect Camera NOTE When using a low end computer image drawing speed might decrease while using a deinterlace filter depending on the type of deinterlace filter NOTE When using a low end computer image drawing speed might decrease when the Anti Aliasing Screen option is selected 36 REVO Remote Pro Remote Administration System 4 4 PANIC RECORDING Clicking the I button on the toolbar starts panic recording of cameras currently displayed on the Watch screen Clicking the button again stops panic recording Up to 16 channels can be recorded at a time and you can select which cameras are to be recorded during the System setup Clicking the 8 button on the toolbar initiates
67. e3 Add All Remove All Upgrade Now Upgrade Sets up the remote upgrade job for remote sites First select the remote sites to upgrade from the Group List and add them to the Upgrade Sites list by clicking the Add button Then click the Upgrade Now button to initiate the remote upgrade job for listed Upgrade Sites e Add Select the site to add from the Group List and click the Add button Add All Adds all sites in the Group List to the Upgrade Sites list e Remove Select the site to remove from the Upgrade Sites list and click the Remove button e Remove All Removes all sites in the Upgrade Sites list e Upgrade Now Upgrades the software on the Upgrade Sites 21 User s Manual BatchJob Setup Upgrade Setup Group List Setup Sites oa Remotesites E RemoteSitel E RemoteSite2 E3 Remotesite3 Setup Sets up the remote setup job for remote sites First select the remote sites to set up from the Group List and add them to the Setup Sites list by clicking the Add button Then click the Setup Now button to initiate the remote setup job for Setup Sites e Add Select the site to add from the Group List and click the Add button e Remove All Removes all the sites in the Setup Sites list e Setup Now Performs the setup on the Setup Sites Disconnect Disconnects all current connections Disconnection can also be performed by clicking the E button on the toolbar Log Viewer Displays log informat
68. ease the reset switch All of the DVR s settings are now at the original settings it had when it left the factory Network Port The DVR can be networked using the 10 100Mb Ethernet connector Connect a Cat5 cable with an RJ 45 CJ jack to the DVR connector The DVR can be networked with a computer for remote monitoring searching configuration and software upgrades See the Network Setup section in this chapter for configuring the Ethernet connections CAUTION The network connector is not designed to be connected directly with cable or wire intended for outdoor use Connecting Alarms _ om emm NOTE To make connections on the Alarm Connector Strip press and hold the button e and insert the wire in the hole below the button After releasing the button tug gently 0000000000000 e f noOoOooooooooooooooooo on the wire to make certain it is connected To disconnect a wire press and hold the button above the wire and pull out the wire Alarm In 1 to 16 You can use external devices to signal the DVR to react to events Mechanical or electrical switches can be wired to the ALARM IN and GND Ground connectors The threshold voltage for NC Normally Closed is above 4 3V and for NO Normally Open 1s below 0 3V and 1t should be stable at least 0 5 seconds to be detected GND Ground Connect the ground side of the alarm input and or alarm output to a GND connector NOTE All the connectors marked GND are common NO Normally
69. echnician to perform safety checks to determine that the equipment is in proper operating condition 16 Field Installation This installation should be made by a qualified service person and should conform to all local codes 17 Correct Batteries Warning Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 18 Tmra A manufacturer s maximum recommended ambient temperature Tmra for the equipment must be specified so that the customer and installer may determine a suitable maximum operating environment for the equipment 19 Elevated Operating Ambient Temperature If installed in a closed or multi unit rack assembly the operating ambient temperature of the rack environment may be greater than room ambient Therefore consideration should be given to installing the equipment in an environment compatible with the manufacturer s maximum rated ambient temperature Tmra 20 Reduced Air Flow Installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the equipment is not compromised 21 Mechanical Loading Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical loading 22 Circuit Overloading Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits might have on over current protection an
70. emote Pro When to Log on to Windows to run REVO Remote Pro automatically when logging onto Windows System 1 System 2 Remote Sites Favorite Sites Sequence Sites Group List Remote Site List E Remotesites Site Name Address Use Modem Use DYRNS Admin Port Es RemoteSitel E3RemoteSitel 10 0 11 111 E Remotesite2 ERemoteSite2 10 0 15 36 E RemotesSite3 EwWRemotesites 10 0 11 103 List All Remote Site Configures the connection list for remote access e Add Click the Add button and enter the information about the remote site you want to add 17 User s Manual Bocce Reference Group The site should be assigned to a Reference UTA Group for effective management of multiple remote sites Click FEF emotesites y the Add button to create a new reference group Device Setup Select the system of the remote site to register When Site Name registering an IP camera select IP Camera IP Address m Remote Site Setup Select PC Based DVR when registering a Camera DVR at the remote site that is PC based Enter a site name and the IP address of the remote site modem telephone number for dial up connections acquired from your network administrator Click the Port button to set up the IP port number of each program The IP port number should match the value set during the network setup of the remote DVR Ifthe remote system version does not allow you to set the IP port numbers use the
71. emote monitoring of live camera images e Panic recording of monitored images e Time lapse and event search of recorded images e Remote software upgrades and system programming e View system and event log information of remote DVRs e Remote monitoring of multiple remote sites using maps e Connect up to 64 remote sites up to 16 remote sites for remote search at a time NOTE This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 1 3 PRODUCT INFORMATION Package Components e User s Manual this document e Installation CD System Requirements e Operating System Microsoft Windows XP x86 32 Bit Service Pack 3 Microsoft Windows Vista x86 32 Bit Service Pack 1 or Microsoft Windows 7 x86 32 Bit e CPU Intel Pentium IV Celeron 2 4GHz or faster RAM 512MB or higher VGA AGP Video RAM 8MB or higher 1024x768 24bpp or higher User s Manual REVO Remote Pro Remote Administration System Chapter 2 Installation CAUTION If an older version of REVO Remote Pro software is installed in your computer you should uninstall the older version first NOTE In the Windows Start menu go to Control Panel Double click the Power Options to open the Management Properties dialog box Under the Power Schemes tab set both Turn off monitor and Turn off hard disks to Never 1 Insert the installation CD 2 Run the Setup exe file NOTE You sh
72. ent access to desired functions REYO Remote Pro System View Remote Favorite Sequence Record Image Layout Help i em E E O E Jm i HE Remote Sites x RemoteSites Disconnect fu REVO Remote Pro Setup Load Setup File Save Setup File Eli Batch Job Setup Log a Save Favorite Sites Auto Sequence Save ES Print W Panic Recording 5 Play O D GS BB Es es ba be lol Ea Es el EH Single Cuad 1 7 5x3 4x9 5x5 1452 6x6 7x7 ox Full Previous Next Select the desired screen layout using the layout toolbar When changing the screen layout the selected camera on the current screen will be located in the first cell of the new layout When in one of the multi view formats clicking the or BH button will move to the previous or next page Clicking Eh Layout Load will apply the selected frame layout to REVO Remote Pro and clicking EE Layout Setup allows you to set up the user defined frame layout 27 User s Manual 28 REVO Remote Pro Remote Administration System Chapter 4 Operation REVO Remote Pro provides remote monitoring functions for viewing video images in real time from either a single site or multiple sites In addition when events are detected at a remote site while in the live monitoring mode REVO Remote Pro displays the event information on the Watch Event View panel In order to perform live monitoring the display option must be set to Watch Screen or Watch and Search Screen during System setup
73. er program Click El to go to the beginning of the video clip Click E to play the video clip in fast reverse Click El to go back one frame of the video clip 39 User s Manual Click J to play the video clip Click A to go forward one frame of the video clip Click A to play the video clip in fast forward Click J to go to the end of the video clip Click E to show the previous camera group if there is recorded video in the previous camera group in the current screen mode Click ES to cycle through the screen layouts It cycles through 2x2 1 7 3x3 4x4 4x5 5x5 and 1 32 NOTE 4x5 5x5 and 1 32 screen modes might not be supported depending on the number of saved camera channels Click EJ to show the next camera group if there is recorded video in the next camera group in the current screen mode Click the Eg icon to set up the REVO Backup properties Print e Print Prints the current image e Frame Info Displays Channel Title Time Type Size and Resolution information about the image Frame Info ia fede protesta e Image Processing Controls brightness blur and sharpness of playback images Single Screen Play Speed Control Layout and Pause Mode Only e Play Speed Control Changes the playback speed Play or fast forward backward playback speed Drawing Mode Screen Size FF RW Aspect Ratio Drawing Mode Selects the draw mode level If you are not sure about the best draw mode level OSD Set
74. er the network IP port number 8000 to 12000 that matches DVR Name the value set during the LAN setup on the DVR Check the box beside Use DVRNS to use the DVR name service Login Setup NOTE If you use DVR Name Service you can enter the name ia registered on the DVRNS server instead of the IP address of the DVR Password and you do not need to enter the network IP port number Confirm password e Login Setup Enter the user ID and password for the DVR associated with devices e DVRNS Server Enter the IP address and port number 10000 to 12000 ofthe DVRNS server which matches the values set during the DVRNS setup on the DVR DVRNS Server IP address Port 10088 10000 12000 Default 10088 Clicking the OK button saves the setting Popup Dwell Time Select Popup Dwell Time in the Option menu to set the duration of the Map popup screen displayed when events are detected and the following Popup Dwell Time window appears Check the box beside Use Timeout and adjust the time out dwell from 1 second to 5 minutes Selecting Display remaining time displays the remaining time out dwell Z Use Timeout on the Map popup screen Popup Dwell Time Display remaining time NOTE Popup Dwell Time will be applied to all maps displayed on the map panel Status Color Setting Select the Status Color Setting in the Option menu and the following Status Color window appears You can set the device to display a unique
75. er video by eliminating these horizontal scan lines and flashes e Record Audio Selecting the box records audio from up to eight inputs when video is recording e Auto Deletion Adjust the length of time recorded data will be kept by using the slide bar or Up and Down arrows buttons Selecting Never will disable the Auto Deletion function The DVR automatically deletes video recorded earlier than the user defined period under three conditions at midnight whenever the system reboots or whenever the user changes the Auto Deletion settings Panic Record Settings RECORD gt Panic Record Tab e Use Panic Recording Check the box when using the Panic recoding function e Panic Recording Duration Set the duration of panic recording Panic recording will stop automatically after the preset duration as long as the PANIC button on the remote control is not pressed to stop the panic recording e Panic Recording ips Set the images per second for Panic recording e Panic Recording Quality Set the recorded image quality for Panic recording e Panic Recording Resolution Set the recorded image resolution for Panic recording Settings Panic Record Schedule M Use Panic Recording Panic Recording Duration ips Quality al PE SA Resolution Schedule Settings RECORD gt Schedule Tab The DVR provides two recording schedule modes Basic and Advanced The Basic schedule mode allows you to set recording settings for all came
76. est suits your needs Install Now Install MSXML 4 0 at C Program FilesiMSXML 4 0 Customize Allows users to choose which program features will be installed and where they will be installed Recommended For advanced users Cancel 13 Click Finish to complete the MSXML installation i REVO Remote Pro Installation Complete REVO Remote Pro has been successfully installed Click Close to exit REVO Remote Pro Remote Administration System Chapter 3 Configuration After installing the REVO Remote Pro software you will find the REVO Remote Pro shortcut icon on the desktop Run the REVO Remote Pro program by double clicking the icon The REVO Remote Pro program consists of the screen 12 docking panels menu and toolbar NOTE Some panels will not be displayed on the screen in the default frame layout To display those panels open the View menu at the top of the screen and select each panel from the menu REVO Remote Pro System View Remote Favorite Sequence Record Image Layout Help a 00 iG la E d4 a 3 E Camerajl RemoteSite1 E RemoteSte2 RemoteSite3 Ba Remote Sites BN i RemoteSitel 04 18 2008 02 27 56 PM i RemoteSite3 04 17 2008 05 27 13 PM i RemoteSite3 04 17 2008 05 27 09 PM i RemoteSite3 04 17 2008 05 27 09 PM i RemoteSite3 04 17 2008 05 27 08 PM i RemoteSite3 04 17 2008 05 27 07 PM i RemoteSite3 04 17 2008 05 27 01 PM i RemoteSite3 04 17 2008 05 26 59 PM
77. etup screen OSD tab NOTE Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence monitoring should be selected in the Display setup screen Main Monitor tab 25 User s Manual Camera Menu Selecting the 3 Camera Menu icon displays the following Camera Menu Se RCS i i gar DE pan 4 lo y roi PTZ Zoom 5 Y Audio 7 Color Control e PTZ Selecting PTZ and choosing the camera number allows you to control the selected camera as long as it has Pan Tilt and Zoom capabilities Selecting PTZ is the same as pressing the PTZ button on the remote control See the following PTZ Mode section for details e Zoom Selecting Zoom and choosing the camera number zooms the current image of the selected camera on the screen Selecting Zoom is the same as pressing the ZOOM button on the remote control For a few seconds after selecting Zoom a PIP displays Inside the PIP a rectangle shows the area that is enlarged You can move the rectangle around using the arrow buttons on the remote control Pressing the e button on the remote control enlarges the area Selecting the ol Exit icon at the top of the screen by pressing the MENU button on the remote control exits the Zoom mode You also can exit the Zoom mode by pressing the ZOOM button on the remote control While in the Zoom mode the El icon displays in bottom left corner if Zoom is selected in the Display setup screen OSD tab e Audio
78. f causes it to stop recording once the hard disk is full Standard CIF High Half D1 or Very High D1 The factory default resolution is High When set to High the DVR has a maximum recording speed of 240 ips When set to Standard the DVR has a maximum recording speed of 480 ips When set to Very High the DVR has a maximum recording speed of 120 ips Selecting ME Panic in the Live Monitoring menu or pressing the PANIC button on the remote control starts panic recording of all cameras and selecting fj again stops panic recording If you set the Panic Recording Duration in the Panic Record setup screen panic recording will stop automatically according to the preset duration as long as fj is not selected or the PANIC button is not pressed 29 User s Manual NOTE When the DVR is not in the Recycle mode and all available storage space has been used panic recording will not operate Although you will be able to record without changing the unit from its original factory settings you will want to take advantages of the DVR s many tools See Chapter 2 Installation and Configuration Record Setup for detailed descriptions of the recording mode options If the DVR was set up to record audio it will record audio from up to eight inputs when video is recording NOTE Make certain you comply with all local and federal laws and regulations when recording audio PLAYING RECORDED VIDEO While in the Live Monitoring pressing the
79. f diagnostics on the recorder Selecting Disk Bad o allows you to delete a check recording schedule Disk Temperature a TE Check Alarm In Selecting the column allow you to change interval the DVR to run self diagnostics on alarm inputs Disk Almost Full Select the percentage level of disk usage at which you want the DVR to trigger an alert Check Alarm In Disk Bad Select percentage level of bad disk sectors at which you want the DVR to trigger an alert Disk Temperature Set the temperature threshold and C Celsius or F Fahrenheit If the temperature of hard disk drive exceeds the defined threshold the system triggers an alert 22 16 Channel Digital Video Recorder Check Recording Y Schedule On 1 All 00 00 24 00 1 min Check Alarm In Alarm In 1 Disk Temperature Disk Temperature oa Cancel Cancel e Actions Set up actions the DVR will take whenever it detects system events System events can sound the DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions NOTE The Alarm Out action cannot be set to System and Panic Record events NOTE For the Notify action to work the Mail should be enabled in the NETWORK Mail setup DISPLAY SETUP OSD Settings DISPLAY 3 OSD Tab e Status Camera Check each OSD item box to turn it On or Off OSD Main Monitor VGA A er Remote Control The icon displays when the DVR can be Re
80. f the screen Selecting the 3 Advanced PTZ icon displays the following the PTZ menu Speed Set the feature you wish to control by selecting it from the menu Refer to the camera s instructions spine for the proper settings Depending on the camera specifications some features may not be supported o Origin CTRL Move to Preset You also can use the mouse for convenient PTZ control Position the mouse pointer at the bottom of the screen and the following PTZ toolbar displays Clicking on the left side exits the toolbar If you want to display the toolbar again position the mouse pointer at the bottom of the screen Change the toolbar location by clicking the empty space on the left side of the toolbar and dragging it to where you want it located on the screen Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you want The other controls on the toolbar perform as described below a amp Zoom In or Out x IZ Focus Near or Far Y Iris Open or Close t xs Set or Load Preset RECORDING VIDEO Once you have installed the DVR following the instructions in Chapter 2 Installation and Configuration it is ready to record The DVR will start recording based on the settings you made in the Record setup screen Recycle On or Recycle Off The factory default is Recycle On Recycle When Disk Full It does this by recording over the oldest video once the hard disk is full Setting the DVR to Recycle Of
81. figure from the list e ID Set the PTZ ID of each camera Cancel PTZ Port Setup RS485 E Enable RS485 e PTZ Port Setup Select the button and set up the PTZ device you are connecting to the DVR Check the Enable RS485 box and set the port s setting according to the PTZ device manufacturer s instructions Cancel 18 16 Channel Digital Video Recorder RECORD SETUP Record Settings RECORD gt Settings Tab e Recycle When Disk Full Selecting this box records over the oldest video data once all available storage space has been used When the box is not checked the DVR stops recording once all available storage has been used Settings Panic Record Schedule Recycle When Disk Full De Interlace E Record Audio e De Interlace Selecting the box toggles between On and Off When set to On the DVR will turn the de interlace filter on while recording video with Very High D1 resolution Auto Deletion Cancel NOTE The video signal has a time difference of 1 60 second 1 50 second for PAL between odd and even fields because it is composed of 60 interlaced fields per second 50 fields for PAL When recording video with Very High D1 resolution video is made up of frame units combining two fields one odd field and one even field This can cause horizontal scan lines or flashes in areas with motion because of the time difference between the two fields Turning on the de interlace filter provides clear
82. gles the playback speed from PP gt gt gt and PPPP Stop Pressing the IM button stops playback and enters the Live Monitoring mode e ZOOM Button Pressing the ZOOM button and selecting the camera button on the remote control zooms the current playback image of the selected camera Pressing the ZOOM button again exits the Zoom mode While in the Zoom mode the amp icon displays on the camera screen if Zoom is selected in the Display setup screen OSD tab e LAYOUT Button Pressing the button toggles between different display formats The available formats are 4x4 3x3 2x2 and PIP Y ou also can use the mouse for convenient playback control Position the mouse pointer on the playback screen and the following Record Table Search screen Compact View mode will display Refer to the following Searching Video Search section for information regarding the Record Table Search The individual controls on the toolbar perform the following functions KJ Go to the previous image O Play Pause D Go to the next image KJ Fast backward play J Fast forward play 30 16 Channel Digital Video Recorder SEARCHING VIDEO While in the Search mode pressing the MENU button on the remote control displays the following menu icons at the top of the screen Pressing the MENU button again hides the menu icons Search Go To 3 Export 4 Camera Menu Alarm Panic Exit NOTE The menu icons also can be displayed by movi
83. hapter Before using your DVR for the first time you will want to establish the initial settings The following describes how to use the remote control and mouse in the setup screen Take a minute to review the descriptions Remote Control Mouse To enter the setup screen To select items To change values To enter characters In Live Monitoring mode press the MENU button to display the menu icons at the top of the screen Select the e Setup icon by pressing the e button Move to the desired item by pressing the arrow buttons 4 w 4 p and select it by pressing the e button Select the desired item and press the Up and Down arrow buttons 4 w to increase or decrease the values and then press the button to complete the entry Select the desired 1tem and press the button to displays a virtual keyboard Move to the desired character by pressing the arrow buttons and press the button In the Live Monitoring mode move the mouse pointer to the top of the screen to display hidden menu icons Click the e Setup icon with the left button Click the desired item with the left button Select the desired item with the left button and roll the mouse wheel up and down to increase or decrease the values Select the desired item with the left button to displays a virtual keyboard Click the desired character with the left button 16 Channel Digital Video Recorder NOTE For simplicity mos
84. he DVR is just to the left of the HDD LED Make certain that nothing blocks the sensor or the remote control will not function properly HDD LED The HDD LED flickers when the DVR is recording or searching video on the hard disk drive Power LED The power LED is lit when the unit is On Alarm LED The Alarm LED is lit when alarm output or internal buzzer is activated User s Manual USB Port Connect the supplied USB mouse to one of the ports The USB mouse will be used to access many of the DVR s functions A USB flash drive can be connected for backup or system upgrades INFRARED REMOTE CONTROL Panic Cameras Layout Zoom PTZ Sequence Freeze Arrow Buttons Enter Menu Alarm PTZ Control Playback Backup Calendar ID Button Ifa DVR System ID is set to 0 the infrared remote control will control that DVR without any additional entries Refer to the Advanced Setup section in this chapter for further information on setting the System ID If the DVR system ID is 1 to 16 you must to press the ID button on the remote control followed by the number button 1 to 16 10 amp 6 in order to control that DVR If two or more DVRs have the same ID those DVRs will react to the infrared remote control at the same time CAMERA Buttons 1 to 16 Pressing the individual camera buttons will cause the selected camera to display full screen When selecting 11 to 16 press 10 and then press the 1 to 6 Buttons 1
85. he IP port number from 8000 to 12000 that is used for network connection when receiving a callback message from a remote site Event Setup Enter the number of emergency events displayed PPP in the Emergency Event panel Set up REVO Remote Pro to sound PARA when events are detected by selecting events from the list and 10 1000 designating the sound file wave path You can set up a different MP sound for each type of event Event atch Alarm In Motion Video Loss Text In Alarm In Bad Disk S M A R T Recorder Bad Disk Bad Disk Full lOOOOOOOOO INNER Sound Path 16 REVO Remote Pro Remote Administration System e Report Setup Set up the Use On or Off and check intervals from 1 to 24 hours of the report function When using the report function REVO Remote Pro checks on the remote site based on the user defined interval and reports system status e DVR Name Service Set up the IP address and port number from 10000 to 12000 of the DVRNS DVR Name Service server The IP address and port number you enter should match the values set during the DVRNS setup of the remote DVR you want to connect to NOTE The DVRNS server cannot be configured when using modem connections Refer to Appendix DVR Name Service DVRNS for more details on DVR Name Service e Startup Settings Select Reselect Language on Next Startup to reselect a language when REVO Remote Pro starts Select Automatically Run REVO R
86. he device icon according to the Map Editor settings Change the popup screen location by clicking the left mouse button on the screen and dragging it to where you want it located Clicking the right mouse button on the popup screen displays the following popup menu REVO Remote Pro Remote Administration System The Remote Sites Panel displays a list of remote sites registered during REVO Remote Pro System setup and a list of installed cameras at the remote sites Entering the site name in the query box and clicking the E3 icon allows you to find the remote site easily in the Remote Sites list Clicking the EE icon allows you to register the remote site clicking the EX icon removes the selected remote site from the list and clicking the E icon allows you to edit the site information of the selected remote site from the list To connect to a remote site select the site or camera you want to connect to from the list and then drag and drop it in the desired position on the screen or the Status View panel The screen displays images from selected cameras and the Status View panel displays the system status information of the connected remote site Connecting to the Status View panel can also be done by selecting Connect Status View from the popup menu displayed by clicking the right mouse button after selecting the site from the list This popup menu initiates the remote menu including Remote Setup Remote System Log and Remote Event Log Refer to
87. he remote site When the audio control panel Acpect Rai gt displays click the icon to send audio to the connected remote site and click the button again to Deinterlacing stop sending audio Click the 4 icon to monitor live audio from the connected remote site through Anti Aliasing Screen the attached speaker and click the button again stop monitoring live audio Clicking both the and buttons allows two way communication Clicking the button disables audio communication e Aspect Ratio Changes the image aspect ratio e Deinterlacing Using a deinterlace filter for interlaced video enhances image display quality by eliminating horizontal scan lines and noise in areas with motion e Anti Aliasing Screen Enhances image display quality by eliminating stair stepping aliasing effects in the enlarged image NOTE Acamera name change in the Web Watch mode does not affect the camera name set up on the remote site Leaving the Camera Title blank causes the camera name set up on the remote site to display NOTE The icon will display on each camera screen when audio communication is available between the REVO Remote system and a DVR WEB SEARCH Remote Search is a remote web search program that allows you to search recorded video on the remote DVR NOTE The remote site connection in the Web Search mode will automatically be disconnected if there is no activity for 30 minutes 4 20104 gt SMTWITFS 13 14 15 16 17
88. he remote sites that were set to notify the REVO Remote Pro system when configuring each event setup Search View Panel Search View RemoteSite2 ARB DA NNI pA 7 e o SY x2 E z Baron 2009 07 09 2009 07 10 A site 2009 7 00 28 20 00 21 00 22 00 23 00 02 00 03 00 04 00 0a CAM enca T CAM3 mM PUR Search view The Search View panel allows time lapse or event searching of recoded data on the remote DVR NOTE Refer to 4 2 Playback and Search for more details Report View Panel Report View o k z Alarm In Record Record Check Record Period Y 04 17 2008 03 20 23PM RemoteSite3 1 7 9 16 NotUse On 04 13 2008 11 19 11 AM 04 17 2008 05 26 28 PM Y 04 17 2008 03 20 17PM RemoteSite2 1716 Notlise On 04 16 2008 06 42 06 PM 04 17 2008 02 26 36 PM Y 04 17 2008 03 20 11 PM RemoteSitel 1 3 1 n 04 12 2008 01 17 23 PM 04 18 2008 02 26 49 PM Ww E Repon WIe iy 12 REVO Remote Pro Remote Administration System The Report View panel displays the system status information of remote sites REVO Remote Pro checks the remote site and reports system status Clicking the Es icon on the panel reloads the data and clicking the amp amp icon prints the report out Report Setup must be configured during REVO Remote Pro System setup for this feature to function Refer to 3 3 Menu System Menu for more details NOTE Some report options may not be supported depending o
89. idual camera buttons on the remote control or clicking the left mouse button on a camera image when in one of the multiview formats 1 e 2x2 3x3 or 4x4 Clicking the left mouse button on the screen again returns to the previous display mode PIP 2x2 3x3 4x4 Selecting the MA 23 533 or 22 PIP 2x2 3x3 or 4x4 icon displays the cameras in the selected multiview screen mode PIP 2x2 3x3 or 4x4 Selecting each display mode is the same as pressing the LAYOUT button on the remote control or scrolling the mouse wheel up and down when in one of the multiview formats 1 e 2x2 3x3 or 4x4 NOTE The PIP display mode will not be supported in the Search mode You can change the location of the PIP Picture in Picture counterclockwise or clockwise by pressing TEn the Up and Down arrow buttons on the remote control To change its location and size by using the Left Bottom Right Top mouse select the PIP and then click the right mouse button to display the following menu Select the options you want You can also change the location of the PIP by clicking the left mouse button on the PIP window and dragging it to where you want it located and change the size of the PIP by clicking ETE the left mouse button at the corner of the PIP window and dragging it until it is the desired size Size 1 4 Previous Group Next Group Selecting the El or M Previous Group or Next Group icon moves to the previous or next page Selecting the
90. ing RGB32 a Draw Overlay Mode O overlay RGB32 e Deinterlacing Set up the deinterlace filter Using a deinterlace filter for O overlay RGB565 interlaced video enhances image display quality by eliminating horizontal scan lines and noise in areas with motion re Soften Filter e Aspect Ratio Set up the image aspect ratio displayed on the screen ia esas Selecting Fit to Screen displays images by fitting them to the screen size ir and selecting Original Ratio displays images by fitting them within the screen size while maintaining their original ratio e Anti Aliasing Screen When using this option the image display quality on the screen will be enhanced by eliminating stair stepping aliasing effects in the enlarged image NOTE If the image cannot be displayed properly because of your PC s specifications lower the drawing mode level NOTE While in the Fast Drawing mode the drawing speed might decrease when the REVO Remote Pro screen is not located on the primary monitor NOTE Overlay drawing mode may not be supported depending on the type of video card installed in your PC Video cards with an ATI chipset are recommended NOTE When using dual monitors selecting Overlay drawing will display the image only on the primary monitor NOTE When using a low end computer image drawing speed might decrease while using a deinterlace filter depending on the type of deinterlace filter NOTE When using a low end comp
91. ion saved in the REVO Remote Pro system NOTE You can also display the Log Viewer screen by selecting Log Viewer from the REVO Remote Pro options under the Start menu in Windows 22 REVO Remote Pro Remote Administration System Bl Log Viewer dl Batch Job P Report QE Check Emergency Check Emergency View Log Displays the type of log and the number of log entries of REVO Remote Pro Selecting a log type from the list displays all entries of the selected log type and you can search for the desired log by setting up a search filter e Filter Set up the search condition Search Time Set up the time range to search within Selecting Current Time and the desired period searches for logs from the current time and as far back as the selected time span Selecting Detail Time allows you to set up a specific starting and ending time to search within Detail Condition Set up the desired search parameters Select a filter target from the second list and select a filter from the third list enter a filter in the text box Then select a comparison operator from the last list Equal to search for logs that satisfy the condition case sensitive Not Equal to search for logs excluding logs that satisfy the condition Like to search for logs that include the entered keyword or Not Like to search for logs that do not include the entered keyword Clicking the Add Condition button allows you to add more search conditions Selecting
92. isplay mode e Sequence Interval Select the display dwell time of sequence monitoring e Event Monitoring On Selecting the box turns the Event Monitoring On When it is On the DVR will display the camera associated with the event when an event occurs See Chapter 3 Operation Live Monitoring for details VGA Settings DISPLAY 3 VGA Tab e Resolution Set the resolution o the VGA monitor OSD WANT Monor VOA e Full Screen Displays the VGA monitor in full screen mode Resolution ETA e Test Selecting the button allows you to test how the screen Y Full Screen will be displayed with the resolution you set 24 16 Channel Digital Video Recorder Chapter 3 Operation NOTE This chapter assumes your DVR has been installed and configured If it has not please refer to Chapter 2 LIVE MONITORING As soon as the DVR completes its initialization process it will begin displaying live video on the attached monitor and playing live audio through the attached speaker The default mode is to display all cameras at once Pressing any camera button on the remote control will cause that camera to display full screen The DVR continues displaying live video and playing live audio until the user enters another mode Press the MENU button on the remote control and the following menu icons display at the top of the screen Pressing the MENU button again hides the menu icons You can navigate through menus and items by pressing th
93. ital Video Recorder e Power Adaptors DVR Camera e Power Cords DVR Camera e USB Mouse e Infrared Remote Control and Batteries e REVO Remote Pro Software CD and User s Manual This document Digital Video Recorder Power Adaptors gt Power Cords USB Mouse IR Remote Control and Batteries AAA Type REVO Remote Pro Software CD and User s Manual 16 Channel Digital Video Recorder Chapter 2 Installation amp Configuration REAR PANEL CONNECTORS No special tools are required to install the DVR Refer to the installation manuals for the other components that make up part of your system Your DVR should be completely installed before proceeding Video In Video Out 3 Audio Out 4 Camera Power Connector Factory Reset Switch Network Port Alarm Input Output RS 485 Port DVR Power Connector Connecting the Video Input Connect the RJ 12 cables from the observation cameras to the modular RJ 12 connectors Connect the coaxial cables from the video sources to the BNC connectors O OJO O Connecting the Monitor A VGA connector is provided so that you can use a standard multi sync computer monitor as your main monitor Use the cable supplied with your monitor to connect it to the DVR The VGA monitor 00000 o000o0 00000 O VGA is automatically detected when you connect it If you prefer to use a standard CCTV monitor connect it to the Video Out con
94. its IP address in the IP Address box The name you enter should match the name set during the DVRNS setup on the remote DVR User ID Password Enter the user ID and password of the remote site to be accessed If you have entered a user ID and a password the site will be connected automatically Up to 32 characters may be used for the user IDs and up to 10 characters may be used for passwords 47 User s Manual NOTE The REVO Mobile program might not work properly when connecting to the remote site via Microsoft ActiveSync Camera Displays the camera buttons Click the desired camera button to select the camera to be viewed Live video Images from the selected camera and the OSD information including camera name and date time will be displayed on the Monitoring Screen No Video will be displayed when there is no video signal from the selected camera NOTE The number of camera buttons depends on the specifications of the remote DVR E Screen Mode Allows you to select the desired screen layout The formats available are single screen quad and full screen EEE E ERROR Single Screen Quad Screen Full Screen NOTE The selected camera video in the quad screen mode will be outlined in green NOTE PTZ control during the full screen display will be performed using the arrow buttons of the PDA device Clicking any place on the screen in the full screen mode returns to the previous screen mode 2 Image Adjustment Allow
95. k in the box beside Include Image Info text information about the site will be included when saving the image Print Clicking the amp 4 button on the toolbar prints the image currently displayed on the screen on a printer connected to your computer By placing a checkmark in the box beside Include Image Info text information about the site will be included when printing the image Screen Menu Selecting a camera on the Watch or Search screen and clicking the right mouse button display the popup menu Change tHe e Change Camera Title Changes the camera name displayed on the screen Leaving the Camera Enable Audio Title blank causes the camera name set up on the remote site to display Changing the camera title SERA does not affect the camera name set up on the remote site Bek Raed Cara e Enable Audio Enables audio communication with the remote site on the Watch screen Two way Deinterlacing audio equipped remote sites only Plays audio while playing back recorded video that has recorded Anti Aliasing Screen audio on the Search screen Refer to 4 Live Monitoring and 4 2 Playback and Search for more details e Aspect Ratio Changes the image aspect ratio displayed on each camera screen Fitto Screen Displays images by fitting them to the screen size Original Ratio Displays images by fitting them within the screen size while maintaining their original ratio Half Size x0 5 to Quadruple Size x4 Select the desired imag
96. king the 9 icon cancels the S El Image processing operation and reloads the original image Only the administrator can on Undo adjust the image at REVO Remote Pro Brightness Satuarti Contrast H ue NOTE It is important that cameras are properly adjusted These adjustments cannot make up for improperly adjusted cameras when the images are recorded Alarm Out Control a am Control alarm out devices on the remote DVRs by clicking the ON or OFF buttons Only the y e administrator can control an alarm out at REVO Remote Pro DEF OFF OFF 4 2 PLAYBACK AND SEARCH REVO Remote Pro allows you to play back and search recorded images on remote DVRs It also provides additional functions including zoom various image enhancements image saving and image printing To use remote playback and search functions the display option must be set to of Search Screen or Watch and Search Screen during System setup To connect a remote site on the Search screen select the site or camera you want to connect to in the Remote Site or Favorite Sites panel and then drag and drop it in the desired position on the screen The Bl icon will be displayed on each Search screen The remote site connection on the Search screen will automatically be disconnected if there is no activity for a specified amount of time Click the 4 button on the toolbar or select Disconnect from the System drop down menu to disconnect the current connection manually
97. me Cancel Alarm In Event Settings EVENT gt Alarm in Tab e No Selecting the box toggles each alarm input On and Off e Type Set each alarm input as NO Normally open or NC Normally closed Motion Alarm In System g Alarm in 1 e Actions Set the actions the DVR will take whenever an input is detected on the Rei needa selected alarm input Alarm In event can sound the external alarm or DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions Alarm Out Select the alarm out signals Alarm Out and Beep to be associated with the alarm input Notify Select Mail if you want to send an e mail to the address set during NETWORK Mail setup PTZ Select the preset position for each PTZ camera where you want PTZ cameras to move to NOTE For the Notify action to work the Mail should be enabled in the NETWORK Mail setup Cancel System Event Settings EVENT gt System Tab e Settings Set up the DVR to run self diagnostics Alarmcin System System Select the interval that you want the DVR to run self diagnostics on the system pater D Check Recording Selecting the column allows you to set Panic Record J up the check recording schedule by selecting Schedule On Check Recording 2 i Selecting allows you to add a check recording schedule ene by setting the day time range and interval that you want the ETS DVR to run sel
98. mera B the screen displays Camera B instead of Camera A Clicking the right mouse button and selecting Exit Group Edit in the menu exits the Active Cameo mode Alarm Resets the DVR s outputs including the internal buzzer during an alarm Selecting the E Y icon is the same as pressing the ALARM button on the remote control EJ Panic Starts panic recording of all cameras Selecting MA again stops panic recording It is the same as pressing the PANIC button on the remote control Exit Exits the Search mode and enters the Live Monitoring mode 31 User s Manual SEARCH Event Log Search Record Table Search Event Log Search The DVR maintains a log of each time the Alarm Input port is activated The Event Log Search screen displays this list Use the arrow buttons to highlight the event for which you Video Loss 7 CAM Video Loss 6 CAM6 would like to see video 05 11 2010 07 01 49 PM Alarm In 5 a Alarm In 5 05 11 2010 07 01 49PM Alarm In6 1 Alarm In 6 Pressing the lt button will select the event video and display se Se e UA the first image of the event Pressing the Ls Play Pause A SS Seman oan butt the remote control button will start playing the event 05 11 2010 07 01 45 PM Motion 1 CAM1 utton on i p y Is 05 11 2010 07 01 44 PM Motion 2 CAM2 video segment If you want to return to live monitoring press EEES Maton SOME the MENU button on the remote control and select the 05 11 2010 07 01 33 PM Motion 5 CAM5
99. mote Control BI No E Title controlled using the infrared remote control E Zoom Record E Audio Zoom The amp icon displays on the enlarged video A ee di Network The amp amp icon displays when the unit is connected to gas ane a network via Ethernet The icon displays when audio E Free Space communication is available between the DVR and a PC Mi Date running REVO Remote Pro or REVO Remote via Ethernet e tati Freeze amp Sequence The 3 icon displays while in the Freeze cabal n mode and the amp icon displays while in the Sequence mode Cancel Screen Group The screen group number displays when the DVR is in other than the 4x4 display mode Free Space The icon displays when the DVR is in the Recycle mode The percentage of available storage space displays when the DVR is not in the Recycle mode Date Time The current date and time information displays User Name The name of the current user logged in displays Camera No The camera number displays in the top left corner of each camera screen Camera Title The camera title displays in the top left corner of each camera screen Record The record related icons display on each camera screen Audio The BY icon displays on the camera screen for which the DVR can play audio PTZ The icon displays on each PTZ camera screen with PTZ capabilities e Transparency Adjust the transparency of the setup screens by using the slide bar
100. n Load Default Map at Startup Recording Setup 7 Use Recording System 1 Set up the date time format for REVO Remote Pro display option and panic recording function e Date Time Format Set the date time format e Display Option Set up the screen display drag amp drop popup option display acceleration and OSD Screen Option Select Watch Screen to use the screen for live monitoring only Search Screen to use the screen for search only or Watch and Search Screen to use the screen for both live monitoring and searching Selecting Hide the Message Box hides the message box that displays the status information about REVO Remote Pro and remote site connections 14 REVO Remote Pro Remote Administration System Drag amp Drop Popup Option Select which mouse button will be used when displaying popup menu screens from Use Left Mouse Button Use Right Mouse Button or both Watch and Search Screen mode only Drawing Mode Setup Set up the display options for the screen e Normal Drawing Depends on your PC s CPU performance and displays images in low speed DIB Draw Mode Fast Drawing Default Displays image in normal speed Direct Draw Mode Fast Drawing YUV420 RGB32 Depends on your PC s video card performance and displays images in high speed Direct Draw Mode Overlay YUV420 RGB32 RGBS565 Displays image in high speed Direct Drawing Mode Fast Drawing YUV420 Fast Draw
101. n the specifications of the remote DVR Status View Panel REVO Remote Pro provides a status display remote setup system log and event log view of the connected remote site in real time To display the status of the remote site select a camera or a site from the Remote Site list and drag it to the Status View panel You can also select Connect Status from the popup menu displayed by clicking the right mouse button after selecting the site from the Remote Site list NOTE Refer to 4 5 Status View for more details DORM Rec From 0413 2008 11 19 11 AM Rec To 04 17 2006 06 53 02 PM Status Version 1 0 0 rs REYO Remote Pro System View Remote Favorite Sequence Record Image Layout Help Bm oy ee key Sl Bw OB MeO Remote Sites x A RemoteSites User s Manual System Menu REVO Remote Pro Bd Setup fee Ch say cs H LE EEE tb la Load Setup File AS f bams fa Save Setup File HED Es 7 rr SH Batch Job Setup e E Disconnect View Log Exit Setup The Setup screen allows setting up the system operation and remote site configuration Es j System 1 System 2 Remote Sites Favorite Sites Sequence Sites Date Time Format Date Time 04 15 2010 16 36 03 Date Format v Time Format 24 hours v Display Option V Watch and Search Screen _ Hide the Message Box Drag amp Drop Popup Option V Use Left Mouse Button Use Right Mouse Butto
102. ncel e Post Event Record Dwell Set the length of time you would like to record for the associated event e Add Schedule Adds a schedule item Up to 20 schedules can be registered No Indicates a schedule number The higher the number the higher its priority Day Select the days that the recording will take place Range Set the time range that the recording will take place Mode Select the recording mode EJ Time Time lapse recording Event recording H Time amp Event recording Channels Select which cameras will be recorded Settings Set the ips Quality and Dwell of the recording for the selected recording mode in the Mode column If you do not set the Settings column the DVR will follow the default settings See below for details MX Deletes the recording settings 20 16 Channel Digital Video Recorder EVENT SETUP Motion Event Settings EVENT gt Motion Tab e No Your DVR has built in motion detection Selecting the box turns the motion detection On and Off for each camera Motion Alarm In System 3 3 768 Block 3 3 768 Block 3 3 768 Block s 3 3 768 Block s s s s s 3 3 768 Block s s s s JE 3 3 768 Block s 3 3 768 Block s 3 3 768 Block s Motion Ignoring Interval Cancel e Sensitivity Set the DVR s sensitivity to motion for Daytime and Nighttime independently AO from 1 the least sensitive to 5 the mos
103. nector using the RCA jack NOTE The DVR supports simultaneous operation of a CCTV and a VGA monitor Connecting Audio NOTE Itis the user s responsibility to determine if local laws and regulations permit recording audio Connect Audio Out to your amplifier using the RCA jack Connect the audio sources to the audio input connector of the observation cameras that are connected to the modular RJ 12 connectors of the DVR Refer to the observation camera manual for configuring the Audio In connection Your DVR can record audio from up to eight sources User s Manual Connecting the Observation Camera Power Cord The CAMERA power connector is provided to supply power to the observation cameras Connect the connector of the adaptor to the DVR and connect the AC power cord to the adaptor and then to the wall outlet Factory Reset switch will only be used on the rare occasions that you want to return all the settings to the The DVR has a Factory Reset switch to the left of the Network port on the rear panel This 0 GA eric wil only te original factory settings AN CAUTION When using the Factory Reset you will lose any settings you have saved To reset the unit you will need a straightened paperclip Turn the DVR off gt Poke the straightened paperclip in the unlabeled hole to the left of the Network port and turn the DVR on gt Hold the switch until the DVR turns on and the live monitoring screen appears gt Rel
104. ng the mouse pointer to the top of the screen e Search Selects video from the event log searches using a recording table or searches motion events see below for more details Go To Displays the first or last recorded image or searches by date and time see below for more details Export Copies a video segment and saves it see below for more details Fo Camera Menu n_n o B Camera Menu EA Zoom Zoom Selecting Zoom and choosing the camera number zooms the current playback image of the selected camera on the screen Selecting the Exit icon at the top of the screen by pressing the MENU button on the remote control or moving the mouse pointer to the top of the screen exits the Zoom mode While in the Zoom mode the amp icon displays on the camera screen if Zoom is selected in the Display setup screen OSD tab e Audio Selecting Audio while in the full screen mode toggles playing recorded audio On and Off While playing recorded audio the 1 icon displays on the camera screen if Audio is selected in the Display setup screen OSD tab NOTE The Camera Menu also can be displayed by clicking the right mouse button on each camera screen scan e Edit Group Selecting Edit Group supports the active cameo function Select Edit Group and choose a camera that you want to change the display position e g Camera A Then click the right mouse button to display the menu If you choose another camera in the menu e g Ca
105. odec Setup Codec Cinepak Codec by Radius Size 1640 x 480 YGA Y Anti Aliasing Screen Keyframe J 120 Frames Quality J 80 s C Limit File Size Progress view Proceeding Frames Motion Search REVO Remote Pro Remote Administration System NOTE Selecting Include Audio Data includes audio data when saving video with recorded audio This option is not available when more than one camera is selected NOTE When the data file reaches 2GB saving stops Selecting Limit File Size and adjusting the maximum file size causes saving to stop once the data file reaches the maximum file size setting Selecting Save Split File saves video by creating multiple files in 2GB units or in the Max File Size units NOTE Selecting View Proceeding Frames displays a popup screen showing the video currently being saved Click the Ha button on the Search View panel to search for motion in the recorded images on remote DVRs Motion Search Search Condition Record Period From 3 4 2010 Y 3 36 05 PM To Find Method Motion Search O Museum Search Sensitivity 3 Num of diff block 3 36 05 PM a Search Screen No Date Time NOTE Motion Search is supported only in the single screen mode e Record Period Sets up the record period of images to search Find Method Selects a search method Motion Search Searches for images with changes in the Detecti
106. ollows Alarm In On A Alarm in Off g Motion Detection f Object Detection KE Video Loss xs Video Blind Text In Alarm In Bad Recorder Bad Disk S M A R T Disk Bad LJ Disk Full 14 Disk Temperature Panic Recording On Panic Recording Off Ed Fan Error On Fan Error Off NOTE Some event icons may not be supported depending on the specifications and version of the remote DVR 11 User s Manual Emergency Event View Panel Emergency Event View site Event DateTime Remotesite i 06 17 2006 15 46 04 E pRemotesitet La 06 17 2008 18 46 01 F a Remotesitel 13 06 17 2008 18 31 04 remotesitet 14 06 17 2008 18 16 03 O remotesitet 14 06 17 2006 18 01 03 remotesite 06 17 2006 17 49 05 E Wi remotesitel 4 06 17 2008 17 46 01 El MM remotesitel 14 06 17 2006 17 45 31 Pott Lal Ae ES Annn aan an e roai oe The Emergency Event View panel displays a list of events preset for notification at the remote site that were called from individual remote sites LAN connection only Selecting an event from the list and then dragging and dropping it in the desired position on the Watch or Search screen connects to the remote site and a checkmark is placed in the box at the left Selecting an event or site from the list and then clicking the right mouse button causes a tooltip to appear which contains the emergency event instruction from the remote site NOTE The Emergency Event View function is available only for t
107. omplete the setup wizard Finish ADVANCED SETUP To enter the Main Setup screen press the MENU button on the remote control Select the 9 Setup icon at the top of the screen by pressing the e button The Login screen appears Enter the password by pressing the appropriate combination of Camera number buttons ee on the remote control and select the OK button There is no default password when Password logging in for the first time Login NOTE Setting up a password is strongly recommended to ensure secure management of the system NOTE To enter a password by using the mouse click the button and a virtual keyboard displays See instructions above for using the virtual keyboard Ve ye T La iz 7 al A rm 2 P NOTE Selecting Quick Setup or Network Setup in the Main Setup screen runs the selected setup wizard Refer to the previous Quick Setup Wizard section for information regarding the Quick Setup and Network Setup Selecting Advanced Setup in the Main Setup screen displays the following Advanced Setup screen and gives you to access to all the DVR s setup screens Your DVR can be set up using various screens and dialog boxes Throughout the screens you will see 4 Selecting the H and pressing the e button on the remote control gives you the opportunity to reset that screen to its default settings You can save your changes by selecting the Save button and pressing the e button Selecting the Cancel
108. on Area between two consecutive images for example when there was movement Museum Search Searches for images with changes which last for the Activation Time in the Detection Area when compared to the image displayed currently on the Search Screen for example when an object disappeared e Sensitivity Sets the sensitivity of the change detection The higher the number is the more sensitive it is e Num of diff block Sets the minimum number of blocks that must be activated to be considered as a change Motion Search only 35 User s Manual Diff to ref image Sets the minimum proportion of blocks that must be activated to be considered as a change Museum Search only e Activation Time Sets the duration that the change must last to be considered as a change Museum Search only If a change is detected but does not last as long as the Activation Time the change is not considered as a change e 2 Detection Area Select Clear Sets the detection area on the Search Screen by selecting or clearing blocks e Search Stop Starts or stops searching The last recorded image is displayed on the Search Screen e Next Searching stops when the search results reach 100 Clicking the button continues searching e Reset Resets the search condition 4 3 ADDITIONAL FUNCTIONS Save Clicking the iq button on the toolbar saves the image currently displayed on the screen as a bitmap or JPEG file By placing a checkmar
109. ou entered should be checked by selecting the Check button otherwise the DVRNS changes will not be saved When no name is entered or a name is already registered on the DVRNS server an error message displays Help Desk Selecting the Save button registers the DVR on the DVRNS server Proper DVRNS settings will cause the help desk information of the DVRNS server to display RTSP Settings NETWORK gt RTSP Tab Enable RTSP Selecting the box enables the RTSP Real Time Streaming Protocol service You will be able to change the settings if Enable RTPS is enabled e RTSP Port Set the port number of the RTSP server n AA nin obtained from your system administrator eat e RTP Port Set the Start Port and End Port numbers of the RTP End Port RTP server obtained from your system administrator AI E A Mail E Enable RTSP Use Mobile e Use Mobile Selecting the box when using Blackberry or other mobile devices 17 User s Manual NOTE You can access a remote DVR and monitor live video images using the media players like VLC Player supporting the RTSP service Start the media player on your local PC and enter rtsp ID Password IP address RTSP port number trackID channel number or start Internet Explorer on your Blackberry or other mobile devices and enter http IP address REVO Remote port number NOTE The RTSP service might not be supported depending on the type of media player Mail Settings NETWORK
110. ould run the file as the administrator user otherwise the installation will fail If you have logged on the computer as other user running the file will ask you to enter the user name and password of the administrator user NOTE The User Account Control window might appear when using Microsoft Windows Vista or later operating system Click Allow and install REVO Remote Pro software following the instructions 3 The NET Framework and the Visual C Runtime Libraries are installed automatically Microsoft NET Framework 2 0 Microsoft Visual C 2005 Redistributable gt OMT COCO NOTE Installing the NET Framework and the Visual C Runtime Libraries is required for REVO Remote Pro to operate properly This installation step will be skipped if they are already installed on your computer 4 Designate the folder path to install REVO Remote Pro and select the user s who can use REVO Remote Pro Then click Next 8 REVO Remote Pro Select Installation Folder The installer will install REVO Remote Pro to the following folder To intall in this folder click Next To install to a different folder enter it below or click Browse Folder Install REVO Remote Pro for yourself or for anyone who uses this computer Everyone Just me User s Manual 5 When the following dialog box appears click Next i REVO Remote Pro Welcome to the REVO Remote Pro Setup Wizard E The installer
111. ow keys while holding the Ctrl key on a keyboard changes the position of selected boxes e Cut Copy Paste Cuts copies or pastes the link box Py p p Go to the Property Link tab and set the properties of the selected link box Property Bar i x Name Enter a name of the link box e Image Double click the field and select an image to insert in the link box e Link Document Double click the field and select a map to be linked with the link box E G l l cat Nene Link Map e Ratio Adjust the image size within the link box Image A X Coordinates Y Coordinates Adjust the position of the link box on the screen by clicking code Documer a each field and changing the numbers oan ates BST e Horizontal Vertical Adjust the link box size by clicking each field and changing the numbers Y Coordinates 231 e Text Show Select Yes to display the name of the link box on the selected image Horizontal 100 vertical 26 Text Show Yes Clicking the fi Save button on the toolbar saves the map You can monitor remote sites by using the map Refer to 3 2 Panel Map Panel section for details 45 User s Manual REVO MOBILE REVO Mobile for PDA REVO Mobile allows you to access remote sites and monitor live video using the Windows Mobile based PDA anytime from virtually anywhere PDA system requirements for using the REVO Mobile program are e Operating System Microsoft Windows Mobile 5 or above e Pro
112. pecific time displays the image recorded at that time on the screen a Selecting the l icon allows you to display an image from a specific time 9 Click the MB icon to enter the event search mode which allows you to search for event log entries using specific conditions and play back the images associated with those event entries Click the icon to save the current image in a bitmap or JPEG file format or click the Es icon to save any video clip of recorded data as an executable file Click the j icon to print the current image on a printer connected to your computer Click the HH icon to set up the image drawing mode and OSD display You can adjust the display speed by changing the image drawing mode and select OSD information to be displayed on the screen 2 Click the icon to reload the recording data 43 The Timetable displays recorded data of the selected camera by time in hour segments Selecting a camera on the screen and clicking the right mouse button displays the text menu screen Chenge Camera THe e Change Camera Title Changes the camera name e Aspect Ratio Changes the image aspect ratio Apat Raitio e Deinterlacing Using a deinterlace filter for interlaced video enhances image display quality by Deinterlacing eliminating horizontal scan lines and noise in areas with motion Anti Aliasing Screen Anti Aliasing Screen Enhances image display quality by eliminating stair stepping aliasing effects in the enlarged
113. perform the following functions as described below kk Go to the First Image lt KEl Fast Backward Play Go to the Previous Image L Stop gt Play gt Go to the Next Image bf Fast Forward Play Ll Go to the Last Image NOTE The speed of fast forward depends on network bandwidth and the number of images per second recorded You can control the playback speed of images that are currently being played back by using the x 1 0 control slider You can control the fast forward or fast backward playback speed of images that are currently being played back fast forward or fast backward by using the Hr x 2 control slider You can display the selected image on the screen in its original size by clicking the El button Clicking the button again displays the image in the preset aspect ratio You can enlarge a specific part of the image up to five times using the ey control slider The user can electronically pan and tilt within the enlarged image by dragging the image using the mouse Click the left mouse button on the enlarged image and drag to move its position Clicking the button cancels the enlargement and resets the image You can change the brightness of the current image using the pS y control slider Clicking the button cancels the brightness changes and resets the image NOTE Zoom in out and brightness control work only while in the pause mode Search Mode REVO Remote Pro supports two search modes time lapse mode and event mode The
114. play Window The Status Display Window displays the event alarm out system check and recording status information of the remote system connected to the Status View panel in real time NOTE Depending on the specifications of the remote DVR status display may not be supported e Event Displays events Motion Detection Alarm In Video Blind The status display of event detection will continue during the preset dwell time of the event driven recording Event Detection iy No Event Detection E a ES Event Off e Alarm Out Displays status of the alarm out signals i Alarm Out 9 No Alarm Out ES Alarm Out Off e System Check Displays the function status of the camera alarm and recording A A Ei Normal El A EJ Irregular El E System Check Off e Record From To Displays the record period e Status Displays the recording playback archiving clip copy status o a A m on nas or e Version Displays the system version information 38 REVO Remote Pro Remote Administration System Appendix REVIEWING VIDEO CLIPS You do not need to install any special software on you personal computer to review video saved as Self Player files The file contains a REVO Backup program Double clicking the target file starts the REVO Backup program NOTE It is suggested that the computer used for the REVO Backup program has at least an 800MHz Pentium lil Intel Pentium Dual Core 2 2GHz recommended If your CPU is slower than this video clip
115. ra channels at one time The Advanced schedule mode allows you to set recording settings for each camera channel 19 User s Manual Setting up the Basic Schedule Mode e Schedule Type Select the Basic schedule mode e Record Schedule Select the time range that the scheduled recording will take place e Mode Select the desired recording mode 1 Time Time lapse recording yellow 4 Pre Event recording red amp ate Post Event recording 1 amp red E Time amp Post Event MX Pre Event recording yellow 4 amp red Pre Event recording amp Post E Post Event 30 00 ips _ Very High High E Event recording Settings Panic Record Schedule Schedule Type nn Record Schedule e ips Set the images per second for the selected recoding mode e Quality Set the recorded image quality for the selected recoding mode e Resolution Set the recorded image resolution for the selected recoding mode e Dwell Set the length of time you would like to record for the selected recoding mode Setting up the Advanced Schedule Mode e Schedule Type Select the Advanced schedule mode Settings Panic Record Schedule Schedule Type Advanced Pre Event Record Setup Post Event Record Dwell ET ve 1 All _00 00 24 00 3H 1 16 e Pre Event Record Selecting Setup allows you to set up the pre event recording by setting the ips Quality Resolution and Dwell for each selected camera channel Ca
116. rd Step 2 5 LAN Setup Get IP Gateway Subnet Mask Use DSL PPPoE Setup Search DNS Server Check Internet connectivity Search uPnP PortForwarding Network Setup Wizard Step 3 5 REVO Dashboard Setup REVO Dashboard is a free internet service where you can access you DVR from anywhere using the World Wide Web This setup wizard will create a REV Dashboard account for you or add this DYR to an existing REVO Dashboard account Multiple DVRs may be added to a single account The next step will ask you to name this DVR so that it can be accessed on the REVO Dashboard When naming your DVR you may use letters symbols and or numbers but NO SPACES Example TomsStore05 Network Setup Wizard Step 4 5 REV Dashboard Setup New account Existing account To create a REVO Dashboard account you will need to create a User ID as an account name and create a password The User ID is not the same as this DVRs name and must be at least 5 characters long If you already have a REVO Dashboard account please enter that information Network Setup Wizard Step 5 5 REVO Dashboard Setup User ID New Password Confirm Now enter the DYR name you created to access this DYR NO SPACES DYR Name Register Add a new DVR 16 Channel Digital Video Recorder LAN Setup Select the desired network configuration between Auto Configuration and Manual Configuration and then select the Test button to test the network configuration
117. rding at that highest frame rate but requires more hard disk space than the LRTPP Please see the User s Manual for details Quick Setup Wizard You have now completed the setup for basic operation Click the Finish button to start Network Setup Finish Network Setup Wizard REVO Network Wizard will help configure the DYR for your Network Please make sure to connect an Ethernet cable between your DVR and Router DSL Modem or Cable Modem The wizard includes LAN Setup UPnP Port forwarding Setup REVO Dashboard Setup Click the Next button to start the wizard Network Setup Wizard Step 1 5 Internet Connection Is your DYR connected to the Internet Yes I will use an Internet connection No I will Not use an Internet connection 10 Record Video Quality Setup e Select the desired video quality profile from Higher Video Quality Priority Profile Standard Recording Profile Longer Recording Time Priority Profile NOTE The higher quality setting requires more storage space Select the Finish button to finish the Quick Setup Wizard and start the Network Setup Select the Next button to start the Network Setup Wizard NOTE The Network wizard also can be accessed by selecting Network Setup in the Main Setup screen Refer to the following Advanced Setup section Internet Connection Select whether or not your DVR is connected to the Internet Network Setup Wiza
118. rom the first recorded image e To Pressing the e button to toggles between On and Off When Type Motion Search Zone 768 Block s a i Sensitivity 3 set to Off you can enter a specific Date and Time When set to On Min Blocks the search will be to the last recorded image e Type Motion Search detects motion in the defined area e Zone Press the e button and an image from the video appears with a grid overlay You can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion The zone should be placed or focused on the centre or at least within the outline of targeted object NOTE Defining the area of the image in which you want to search for motion is nearly identical to setting up the DVR for Motion Detection Please refer to the Motion Event Settings section in Chapter 2 Installation amp Configuration Advanced Setup Event Setup for more detailed instructions on setting up the detection blocks e Sensitivity Select the sensitivity from 1 low sensitivity to 5 high sensitivity e Min Blocks Set the number of sensor blocks that must be activated Once you set your desired search conditions select Search and press the e button to display the search results in the Motion Search screen Selecting Cancel exits the screen without saving the changes When you search for motion events for another camera you will be asked whether or not you want to delete the pre
119. s Alarm Selecting the 1 Alarm icon resets the DVR s outputs including the internal buzzer during an alarm Selecting the Vicon is the same as pressing the ALARM button on the remote control Panic Selecting MI Panic in the Live Monitoring menu starts panic recording of all cameras and displays on the screen Selecting fj again stops panic recording It is the same as pressing the PANIC button on the remote control Setup Selecting the e Setup icon enters the Main Setup screen Search Mode Selecting the 49 Search Mode icon exits the Live Monitoring mode and enters the Search mode 26 16 Channel Digital Video Recorder Login Logout Selecting F Login in the Live Monitoring menu accesses the Login screen and you will be asked to enter the password to log into the system Selecting E Logout in the Live Monitoring menu displays the Logout screen asking you to confirm whether or not you want to log out the current user DISPLAY MENU In the Live Monitoring mode or Search mode moving the mouse pointer to the left edge of the screen displays the following Display menu icons 1 Full Screen O PIP 2x2 3x3 6 4x4 Previous Group e i ELL Next Group a 4 A gt tie 4 ail OSD P cams E s ME Full Screen Selecting the E Full Screen icon displays the selected camera full screen Selecting the Ml icon and choosing the camera number is the same as pressing the indiv
120. s eee eae 1 FAC KA content de ee oe incase tele is ta e a 2 Chapter 2 Installation amp ConfiguratiON ooccccoonccncoconcncconcnnconanoncononcnnononnnncnnnrnnonancnnonancnnnnnas 3 Rear Panel COmMCClORS ccc cere ccc o elas 3 FONT Panel CONTOS sc O ace Weal ae dada tenia 5 Infrared Remote Control ii A anita a a a 6 Turning OM ING PO Wenn ii ico aay 8 QUICK SEW Wizard ai o 9 Advanced Sc Dit id ide Masta 12 Sc A aes leet 13 A A ae ec ee 15 A ae tne see ae ney Ue eee eae Ce ee fe ee ere met eee ee ee 18 RECONTO GUI o AREA 5 O eee 19 A aR eee 21 BEE Se O A a ref ee er ee 23 Chapter 3 Operation iii A A ee 25 LIV MONO IN nar ad a a 29 Display MS Uan 21 EVent NIOMIMOMMG ra Dio ciaci n 28 Ac ve Cameo Mode ns senses 1055 omic o e ashe Cs tose 28 PTA MOOG eraning Mies bi eta sat nse ic A 28 ROC CORANO VIC On nae Sica a ete ec E teres Cua ce cee es cea camemec saat wench esate caeeutneee 29 Paving Recorded VideO tata les tota dl dni idee eat eae 30 gt Sarco ua teens do asia ee ne Ne eee ee eee 31 NS 6 ae ee ae EA 32 GOTO paren eee ee eet en err erect RR eae A A 35 A E ere eee ea 35 REVO REMO enei ieee e ee 36 WeB MONTONG deroet a 38 E e dd tes 39 ADE e lo o eee 41 EMO Code NOCES o dada 41 Momo pala o AAA PA eansetecatiaiate E es oeaten ee meee ERS 41 Map of Screens Advnaced Setup cccccssscecccssscccesseecceseecceagececseseeeseseeesseseesssaeeesseaes 42 SA er Rl NO tenet ee eee 43 User s Manual
121. s recorded at maximum speed with very high image quality will be played back slowly Also DirectX 9 0 or higher is required to install and the VGA card with 16MB or higher video RAM is recommended for proper operation NOTE You will be asked to enter the password to initiate the REVO Backup program if you select Save Password option when saving recorded video a do i b hm The REVO Backup Screen displays the clip images NOTE Proper image display depends on the display settings of your PC If you are experiencing display problems click the right mouse button on the background screen and select Properties gt Settings then set the Color quality to 32 bit Then select Advanced gt Troubleshoot and then set the Hardware Acceleration to Fulf Please make sure that DirectX version 9 0 or higher has been installed if the display problem continues To check the version of DirectX click Start gt RUN and type dxdiag then hit the enter key which will display DirectX Diagnostic Tool dialog box Then move to the Display tab and make sure DirectDraw Acceleration is set to Enabled Test DirectDraw by selecting the DirectDraw Test button Please check the driver version of the video card and update it to the latest version available If you still have display problems after changing all display settings as described above try replacing the video card Video cards with an ATI chipset are recommended Clicking Eg exits the Play
122. s you to adjust the brightness contrast hue and saturation of the image Selecting Undo cancels the image processing operation and reloads the original image Brightness PTZ Control Allows you to control pan tilt iris and zoom of the camera at the remote site and set certain position as preset and go to desired views Set Move to Preset Zoom In Out Iris Open Close ROKER e Alarm Out Control Allows you to control alarm out devices at the remote site X Disconnection Disconnects the current connection and closes the REVO Mobile program 48 REVO Remote Pro Remote Administration System REVO Mobile for iPod Touch or iPhone REVO Mobile allows you to access remote sites and monitor live video via network connection using the Apple based iPod Touch or iPhone iPhone OS 3 0 or later version anytime from virtually anywhere System Diagram iPhone iPod Touch DVR NETWORK i y Installation 1 Connect your iPod Touch or iPhone to your PC Run the iTunes program on your PC and connect to Tunes Store CITY GUIDE G LaS CE Books Browse Business Power Search Y PLAYLISTS TERE yid Account 7 Tunes DJ Entertainment Support i 3 textPlus Salesforce Mobile Stick It iPhone S reQall 3 Genus Finance Business Utiities Produciviy i 90 s Music Health amp Fitne TOPPAIDAPPS st Music Videos Lifestyle 7 uu xi Recently Added Mu
123. screen Select the desired display option between Watch Screen and Search screen If you do not select the display option Watch Screen display will be assigned to all cameras of the registered Favorite site by default 19 User s Manual NOTE Clicking the 34 button on the toolbar will save the current screen layout of the Watch screen or Search screen directly to the Favorite site NOTE The Favorite Site list does not work with modem connections System 1 System 2 Remote Sites Favorite Sites Sequence Sites Sequence Dwell Time default Sec 5 3600 default 120 Group List Auto Sequencing hy default EA RemoteSites E RemoteSite 1 E RemoteSite2 E RemoteSite3 Add All Remove Remove All Sequence Site Configure the sequence site REVO Remote Pro connects to the registered sites sequentially allowing connection to more than one remote site Register an Auto Sequencing group and add desired sites in the Group List to the Auto Sequencing group Video from the sites added to the Auto Sequencing group 1s displayed on the screen in the preset sequence interval during the sequence monitoring e Sequence dwell time Displays the preset sequence intervals from 5 seconds to 1 hour for each connection to the sites registered in the Auto Sequencing group You also can change the preset sequence interval e Auto Sequencing Displays the list of registered Auto Sequencing groups You can add a new group max
124. se some functions of the REVO Remote might be limited NOTE There might be a problem with screen display or screen update due to low image transmission speed when using the Microsoft Windows Vista or higher operating system In this situation it is recommended that you disable the Auto Tuning capability of your computer Run the Command Prompt with elevated administrator permissions Go to the Start Menu gt Accessories gt Command Prompt gt Click the right mouse button and select the Run as administrator option Then enter netsh int tcp set global autotuninglevel disable and press the enter key Restart your computer to apply the changes If you want to enable the Auto Tuning capability again enter netsh int tcp set global autotuninglevel normal after running the Command Prompt with elevated administrator permissions Restart your computer to apply the changes 37 User s Manual WEB MONITORING Remote Watch is a remote web monitoring program that allows you to monitor live video transmitted in real time from the remote DVR Revo Remote Watch Windows Internet Explorer E http 10 0 12 81 12088 watch htm Ba 112 Remote Wat 10 0 12 81 CAM13 2010 04 27 20 07 05 10 0 12 81 CAMS 2010 04 27 20 07 05 10 0 12 81 CAM15 2010 04 27 20 07 05 AN N 1924 CANT PNION4 97 FONTS 1 Click the E icon to log out of the REVO Remote program Click the Bd icon to access the web search mode 3 Position
125. shut down Confirm Cancel Cancel Date Time Settings SYSTEM gt Date Time Tab e Date Set the system date and select the date format e Time Set the system time and select the time format e Time Zone Select your time zone e Use Daylight Saving Time Selecting the box sets the UL ZN GMT 05 00 E T 5 8 Ca system to use daylight saving time System Date Time Storage Date o cece nse Time sl M Use Daylight Saving Time NOTE The clock will not start running until you have selecting the Save button 14 16 Channel Digital Video Recorder Storage Settings SYSTEM gt Storage Tab e Capacity Displays the capacity of the storage drive a om so IN Disk Bad Displays the damage status of the storage drive Capacity 145 20 GB Not Formatted The device is not formatted Disk Bad Good 0 Good The device is working properly though some Temperature Good 41 C 106 F portion of the storage is damaged S MA R T Good Bad More than 90 of the storage is damaged Recorded Data e Temperature Displays the temperature of the storage drive 04 22 2010 01 27 03 PM E ee N A The DVR cannot read the temperature Good The temperature is normal Bad The temperature is 70 C 158 F or higher e S M A R T Displays S M A R T information of the storage Good The storage condition is normal Bad Data cannot be written on or read from the storage drive N A The S
126. sic A a Navigation TwitterFon Pro Roambi Visualizer PwDDJ TheTumbler Tu e Recently Played aoe Social Networking Business Music Social Networking FastFinga xi Top 25 Most Played ae Productivity egos 2 BeatRider 1 4 Productivity iPodtouch Entertainment Reference 3 GoStop JAS Social Networking 30 Software y Entertainment e U ae 4 arate 203 TOEFL aes Get the Update Her Utilitie is Ene Nestor ano 6 ene _SOMIFI pan AroundMe ener 9 poral co ish Korean A 10 pi Di Utilities LL R o O aD S Piano apa SALE TweetMic Quickoffice Mob Social Networking Business Ed A a Y 2 Enter REVO Mobile in the search field at the top right corner of the Tunes screen lo ela File Edit View Controls Store Advanced Help iTunes 3 Install the REVO Mobile program on your iPod Touch or iPhone and run the program iPod 10 10 AM e Connect Touch to connect to a site to monitor e Camera Touch to select a camera to monitor e Settings Touch to register sites Connect Camera Settings 7 49 User s Manual Operation l 50 Touch the Settings button to register DVRs Select Site List and then enter the DVR s information Pas 10M0AM jas moam Pod 10 10 AM REVO Mobile REVO Mobile Settings ES Add New Site Te Site List gt General DVRNS gt Site ID gt Connection Address gt Port 8016 gt Use DVRNS f OFF Login User ID g
127. t P d RERKEREN gt Connect Camera Settings 7 asswor e General Enter the site name e Connection Enter the IP address and port number of the DVR Ifthe DVR uses the DVRNS function enable the Use DVRNS option and enter the name registered on the DVRNS server instead of the IP address of the DVR e Login Enter the user ID and password set on the DVR If the registered DVRs use the DVRNS function select DVRNS and enter the IP address or domain name and port number of the DVRNS server The IP address or domain name and port number of the DVRNS server should be the same as those registered on the DVRs iPod gt 10 10 AM iPod gt 10 10 AM iPod gt 10 10 AM a Site List gt Address revodvr com gt DVRNS gt Port 10088 gt Connect Camera Settings 7 You can add other DVRs or delete a registered DVR by touching the Edit button in the Site List screen or edit a DVR s information by selecting the DVR from the list Pod 2 10 10 AM iPod 2 10 10 AM iPod 10 10 AM REVO Mobile REVO Mobile Settings Settings Site List Edit Site List gt RemoteSite1 10 0 12 79 gt DVRNS gt Connect Camera Settings 7 REVO Remote Pro Remote Administration System iPod gt _ 10 10 AM iPod gt 10 10 AM Done Site List F Site List Site Info RemoteSitet 10 0 12 79 General Site ID RemoteSite1 gt Connection Address 10 0 12 79 gt gt or Port 8016 gt Use
128. t with the dynamic IP A AAA address or the domain name To make this feature easy E Use DVR Name Service you can name your DVR example TomStore05 and connect using the DVR name instead of the IP address To use the DVRNS feature you will need to have your DVR registered through DVRNS with the settings matched between your DVR and the DVRNS server Any changes VEY Name to the DVRNS server might cause improper operation DYRNS Server Port 10000 12000 Help Desk NOTE When Network settings have been changed set up the DVRNS after saving your Network changes by selecting the Save button Use DVR Name Service Checking the box when using the DVR Name Service function You will only be able to change the settings if Use DVR Name Service is enabled DVRNS Server Enter the IP address or domain name of the DVRNS server NOTE You will need to get the IP address or domain name of the DVRNS server from your network administrator You can use the domain name instead of IP address if you set up the DNS server during Network setup Port Set the port number of the DVRNS server Use NAT Check the box when using NAT When using a NAT Network Address Translation device such as a router refer to the NAT manufacturer s instructions for the proper network settings DVR Name Enter the DVR name to be registered on the DVRNS server Check whether or not the name you entered is available by selecting the Check button NOTE The DVR name y
129. t Record Recommended Continuous amp Motion Event Record Continuous Record Motion Event Record means that the system will record when a Motion Event is detected Generally video quality is more important for Motion Event Recording than it is for Continuous Recording so the system records at a higher quality for Motion Events Select the Next button to start the Quick Setup Wizard NOTE Selecting the Cancel button throughout the screens exits the Quick Setup Wizard without saving your changes and return to the Live Monitoring mode Date Time Setup e Date Set the system date and select the date format e Time Set the system time and select the time format e Time Zone Select your time zone e Use Daylight Saving Time Selecting the box sets the system to use daylight saving time NOTE The Date Time will be set and the clock will start when you click the Next button Record Method Setup e Select the desired recording mode from Motion Event Record Recommended Continuous amp Motion Event Record Continuous Record NOTE You should understand each recording mode before selecting the DVR s recording method User s Manual Quick Setup Wizard Step 3 3 Record Video Quality Setup Which video quality profile would you prefer to use High Video Quality Priority Profile Standard Recording Profile Longer Recording Time Priority Profile The H PP provides the highest video quality reco
130. t of the operation explanations in this manual are based on using the Remote Control While setting up the DVR there will be many opportunities to enter names and titles When making these entries a Virtual Keyboard will appear Camera 1 a ee LKS M UVWXY 2 Sie beds space Use the arrow buttons on the remote control to highlight the character you want in the name or title and press the e button That character appears in the title bar and the cursor moves to the next position Selecting 4 toggles between the upper and lower case keyboards backspaces and M deletes entered characters You can use up to 31 characters including spaces in your title QUICK SETUP WIZARD When you turn the system on for the first time the Quick Setup Wizard will run The Quick Setup Wizard guides you to configure the system for basic operation The wizard also can be accessed by selecting Quick Setup in the Main Setup screen Refer to the following Advanced Setup section Quick Setup Wizard You are about to start the Quick Setup Wizard This Wizard will guide you through Date Time Setup Recording Method Setup Recording Video Quality Setup Network Setup Optional Click the Next button to start the wizard Quick Setup Wizard Step 1 3 Date Time Setup Date Time Time Zone Use Daylight Saving Time Quick Setup Wizard Step 2 3 Record Method Setup Which recording method would you prefer to use Motion Even
131. t sensitive Daytime a Nighttime Cancel e Zone Define the area of the image where you want to detect motion e g a doorway The Motion Detection Zone screen is laid over the video from the selected camera You can set up motion zones one block at a time in groups of 16 individual block groups A block group is positioned within the image area using the arrow buttons on the remote control and individual blocks within the block groups are selected or cleared using the camera buttons on the remote control Pressing the button on the remote control or clicking the right mouse button displays the menu screen Each item in the menu has the following functions Select Select All Activates highlighted blocks or all blocks to detect motion Clear Clear All Deactivates highlighted blocks so that they will not detect motion a Reverse Reverse All Activates inactive highlighted blocks neces or all inactive blocks and deactivates active highlighted Select All blocks or all active blocks Clear All OK Accepts changes and closes Zone setup eta Cancel Exits Zone setup without saving changes Select oK Cancel NOTE You can select the block groups to be selected or cleared by using the mouse Place the mouse pointer where you want to start the line Hold down the left mouse button and drag the pointer to where you want to end of the line Release the mouse button and a group of blocks appears along the line you
132. tails on system setup Remote System Log Remote Event Log These selections display the system log and event log information of a remote DVR Set the time range of interest and click the Find button The log entries within the time range displays in the list 100 results can be displayed in a single page Click the Move buttons to display additional results e From Adjust the search starting date and time When First is selected it will search from the first logged item e To Adjust the search ending date and time When Last is selected Log RemoteSite1 me System Log Event Log From First To Las it will search to the last log E re e Find Displays remote log entries within the selected period Panie On 2007 1211 0227 43 PM e Print Prints the log information Pani On e A E e i Remote Setup Change 2007 12 11 0220 37 PM Save Saves the log information as a text or CSV file UTF 8 Remote Time Change 2007 12 11 02 20 31 PM als pea eile sil a bles encoded 24 Remote Login admin Remote Logout admin Local Search Begin Local Setup End Local Setup Begin Local Login admin Remote Login admin Boot Up Shutdown Local Logout admin Local Setup End Local Setup Begin Local Setup End 2007 12 11 02 20 33 PM 2007 12 11 12 15 44 PM 2007 12 11 10 41 58 AM 2007 12 11 09 05 34 AM 2007 12 11 08 53 24 AM 2007 12 11 08 53 24 AM 2007 12 11 08 53 04 AM 2007 12 11 08 52 54 AM 2
133. te to add and Select the desired screen layout used when the Favorite site is connected Change Select the Favorite site to change from the Site Name list and click the Change button Then change the site name or screen layout Remove Select the Favorite site to remove from the Site Name list and click the Remove button e Connect Favorite Site at startup Select whether or not your favorite site is automatically connected when REVO Remote Pro starts e Remove Selected Camera Removes selected cameras from the Favorites map Cameras can also be removed by clicking the right mouse button after selecting the camera e Remove All Cameras Removes all cameras from the Favorites map NOTE Cameras can be selected by clicking the left mouse button on the camera in the Favorites map Selected cameras will be outlined in red Clicking the left mouse button on the camera while holding the Ctrl key toggles camera selection On and Off Multiple cameras can be selected by clicking the left mouse button while holding the Shift key NOTE W Watch Screen and S Search Screen displayed to the left of the camera number indicates the display option of each camera The display option can be selected when registering a Favorite site Selecting the remote site from the Group List and dragging and dropping it to the Favorites map using the right or left mouse buttons This is user defined and must be set during System setup displays the text menu
134. tem e Event AlarmOut Checking the Switch on off box controls the alarm out remotely by clicking the alarm out icon on Map panel Ic at Switch onfott e Event AlarmIn Selecting Alarm in Event from a drop down list and checking the Watch View Popup box sets the Map panel to pop up another screen when an alarm in event occurs Selecting Click from a drop down list and checking the Watch View Popup box pops up Watch wiew Popup another screen by clicking the mouse button on the alarm in icon on the Map panel regardless of event detection NOTE The popup camera should be associated with the alarm in device to use the popup function Refer to the Device Setting General Popup camera section for the popup camera association Link Setting Click the Link button on the toolbar and place it on the screen linked with a sub map Then the Link Map box appears Select the individual link boxes by using the Ctrl key on the keyboard and then adjust the size and position of the link box using a mouse a keyboard or the icons shown below e Interval adjustment Equalizes the distance between three or more selected boxes e Size adjustment Equalizes the size of two or more selected boxes Clicking the arrow keys while holding al a the Shift key on the keyboard changes the size of the selected boxes _ 5 T e Position adjustment Arranges two or more selected boxes towards one direction or 2 ea tt towards the center Clicking the arr
135. tem Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista or Microsoft Windows 7 e CPU Intel Pentium III Celeron 600MHz or faster e RAM 128MB or higher e VGA 8MB or higher 1024x768 24bpp or higher e Internet Explorer Version 6 0 or later 36 16 Channel Digital Video Recorder Start Internet Explorer on your local PC You can run the REVO Remote program by entering the following information in the address field http IP address port number The DVR IP address and the REVO Remote port number default 12088 set in the Network setup screen General tab Or http www revodvr com DVR name The DVR name registered on the DVRNS server NOTE You will need to get the appropriate IP address for the DVR you want to connect to and the REVO Remote port number from your network administrator NOTE REVO Remote only works with Microsoft Internet Explorer and will NOT work with other browsers LOGIN Select between the REMOTE WATCH Web monitoring and REMOTE REVO Remote Login SEARCH Web search modes Entering ID default admin and PASSWORD and clicking the LOGIN button logs in using the selected mode You will need to enter the DVR IP address in the DVR ADDRESS field when running the REVO Remote program by entering http www revodvr com Selecting the Use DVRNS option allows you to enter the DVR name registered on the DVRNS server instead of the IP address You must enter the
136. the Record Player program and plays video saved in the recording folder designated during the System setup The Record Player GUI and its controls are almost identical to the REVO Backup Refer to Appendix Reviewing Video Clips If you want to play back video saved in another recording folder run the Record Player program first Move to the Start menu in Windows Then select RecordPlayer from the REVO Remote Pro options and select the recoding folder path you want Recorded video can be saved as a bitmap or as an executable file using the save function of the Record Player NOTE Panic recording will be available only if you select Use Recording and it is set up in the recording options during the System setup NOTE The date and time displayed on the Record Player indicates when the recording was made on REVO Remote Pro NOTE The M icon will display on each screen when panic recording starts NOTE Audio recording is not supported 4 5 STATUS VIEW Status View REVO Remote Pro provides a status display remote setup system log and event A E C log view of the connected remote site in real time To display the status of the remote site select a camera or a site from the Remote Site list and drag 1t to the Status View Status Display Window panel You can also select Connect Status from the popup menu displayed by clicking the right mouse button after selecting the site from the Remote Site list Rec From 04 13 2008 11 19 11 AM
137. the mouse pointer on the Remote Watch logo to see the version number of the REVO Remote program 4 The DVR information window displays the login information of REVO Remote 5 Click the screen format to select the desired display mode When changing the screen format the selected camera on the current screen will be located in the first cell of the new layout 6 Click the camera button to select the camera to be viewed Click the icon to adjust the brightness contrast saturation and hue of the monitored image Click the l icon to pan tilt and zoom the remote site camera 9 Click the Y icon to control alarm out devices at the remote site Contrast Saturation Brightness Hue Move Buttons Dd PE D Zoom Out Zoom In Iris Close Iris Open Le Undo Focus Near Focus Far E Set Preset Go to Preset Click the 1 icon to save the current image in a bitmap or JPEG file format 19 Click the Hi icon to set up the image drawing mode and OSD You can adjust the display speed by changing the image drawing mode and select OSD 2 The event status window at the bottom displays a list of events that were detected at the remote site 38 16 Channel Digital Video Recorder 3 Selecting a camera on the screen and clicking the right mouse button displays the text menu screen Change Camera Title e Change Camera Title Changes the camera name Enable Audio e Enable Audio Enables audio communication with t
138. tion on the Map panel PTZ Control Panel an The panel allows PTZ control while live monitoring a remote site JE O NOTE Refer to 4 1 Live Monitoring for more details DO 4 OJO 10 REVO Remote Pro Remote Administration System Color Control Alarm Out Control and Image Processing Panels Color Contral x Alarm Out Control Image Processing DARA S LA 14 E OFF OFF OFF ntra 1 Image Processing PTZ Contro La Color Controll The panels allow you to control color and alarm out while live monitoring a remote site or to enhance images while playing back video NOTE Refer to 4 1 Live Monitoring and 4 2 Playback and Search for more details Watch Event View Panel Watch Event View Site ven Date Time i RemoteSitel ES CAM1 04 17 2008 04 46 39 PM i RemoteSitel ES CAM1 04 17 2008 04 46 09 PM i RemoteSitel ES CAMI 04 17 2008 04 44 56 PM i RemoteSitel ES CAMI 04 17 2008 04 44 48 PM i RemoteSite1 ES CAM1 04 17 2008 04 44 44 PM i RemoteSite1 ES CAM1 04 17 2008 04 44 29 PM i RemoteSite1 ES CAMI 04 17 2008 04 44 12 PM i RemoteSitel ES CAM1 04 17 2008 04 44 06 PM i RemoteSite1 ES CAM1 04 17 2008 04 43 46 PM 3 sin an 4 OO marcas Meagan me AAN y Watch Event viewit The Watch Event View panel displays events detected at individual remote sites while REVO Remote Pro is in the live monitoring mode The description of event icons is as f
139. top left j v Background Image Setting First prepare the image in a bitmap or JPEG file format Click the EM Background button on the toolbar and select the background image of the map Go to the Property Canvas tab and set the background image information x Name Enter a name of the background image e Horizontal Vertical Adjust the background image size by clicking each field and changing the E General numb A avs me AS e Position Adjust the position of the background image on the screen Select Auto Fit to fit the Horizontal 800 map screen size to the background image Vertical 600 Position Left Top Option Menu Click the Option menu to set up the remote site information device status display and remote site name to display He Site Information Setting Popup Dwell Time Status Color Setting Name Table Site Information Setting Select the Site Information Setting in the Option menu to set the information about the remote site connections and the following Site Information setup window appears 42 REVO Remote Pro Remote Administration System rere Click the Add button and the following Site Item box appears Site Name IP Address RemoteSite1 10 0 12 170 REET e Remote Site Setup Enter the site name and IP address of the DVR Sa es connected to the devices you want to include on the map Click the Port Site Name _ button and ent
140. ts actual size Single Screen Layout Only You can move the enlarged image by clicking the left mouse button and dragging Click the J icon to display the image full screen Click the 3 icon and set up the date and time of a saved image to view the image from the specific time Encryption icons display at the bottom right corner amp displays when the clip file has not been tampered with and amp displays and playback stops when the system has detected tampering NOTE If the VGA card or monitor does not support 800x600 video resolution Full Screen might not display properly If this happens press the ESC key on your PC keyboard to return to the normal screen mode Click the slider bar and move it left or right to move through the video clip Placing the mouse cursor on an image and clicking will cause that image to display full frame 40 REVO Remote Pro Remote Administration System DVR NAME SERVICE DVRNS Overview Using Static IP addresses in LAN WAN networks requires high management overhead and increases the cost burden to users Therefore it has become essential for DVRs to support Dynamic IP addresses in ADSL VDSL networks using DHCP Dynamic Host Configuration Protocol This reduces cost burdens and increases cost effectiveness for system users Use the following steps to set up a system using DVRNS System Configuration STEP 4 REVO Remote Pro STEP 1 STEP 3 STEP 2 DDNS Server STEP 1 DVR gt
141. ts or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the equipment 12 Servicing Do not attempt to service this equipment yourself Refer all servicing to qualified service personnel 13 Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or the plug has been damaged If liquid is spilled or objects have fallen into the equipment If the equipment has been exposed to rain or water If the equipment does not operate normally by following the operating instructions adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation If the equipment has been dropped or the cabinet damaged When the equipment exhibits a distinct change in performance this indicates a need for service 14 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this equipment ask the service t
142. tton is also used to enter the Cameo mode in the Live Monitoring mode or Search mode User s Manual ALARM Button Pressing the ALARM button resets the DVR s outputs including the internal buzzer during an alarm PTZ Control Buttons While in the PTZ mode the PRESET buttons are used to save Presets and load a Preset View the ZOOM buttons are used to Zoom In and Zoom Out and the FOCUS buttons are used for Near Focus and Far Focus BACK UP Button Pressing the BACK UP button allows you to copy video clips CALENDAR Button In the search mode pressing the CALENDAR button displays the Calendar Search screen TURNING ON THE POWER Connecting the power cord to the DVR turns on the unit The unit will take approximately 30 seconds to initialize As soon as the DVR s initialization process completes you might have the DVR s internal buzzer sound if not all 16 cameras are installed to the DVR because the DVR is set to use all camera channels by default To turn the internal buzzer off press the ALARM button on the remote control or move the mouse pointer to the top of the screen and click the E 1 4 arm icon When you turn the system on for the first time you will be asked to select the startup language Select the desired language and then click the OK button Language Please select a language English French Spanish NOTE You can change the language during System setup Refer to the Advanced Setup section of this c
143. up for your system try each level until the image displays properly e Screen Size Changes the REVO Backup screen size e Aspect Ratio Changes the image aspect ratio displayed on each camera screen w Enable Audio w Show Text In e OSD Setup Selects options to display on the screen e Enable Audio Plays audio while playing back recorded video that has recorded audio Single Screen Layout Only e Anti Aliasing Screen Enhances image display quality on the screen by smoothing stair stepping aliasing effects in the enlarged image If video plays slow because of your CPU s slow speed releasing the Anti Aliasing Screen option might improve playback speed e Show Text In Displays video with text in data if the video was recorded with text in data Single Screen Layout Only Click the Ef icon to save clip images Save ae Image e Save as Image Saves the current image as a bitmap or JPEG file e Save as Image Actual Size Saves the current video frame as a bitmap or JPEG file in its Save as Clip Copy actual size Single Screen Layout Only Seye ae tiden e Save as Clip Copy Saves video of desired time range as an executable file e Save as Video Saves video of desired time range as an AVI file e Clip Copy Log Saves the clip copy log information as a text file The user information about Save As Clip Copy will be logged as Internal Copy Clip Copy Log Click the 4 icon to enlarge the image or display the image in i
144. use most frequently Clicking the 2 icon at the upper right corner of a panel enables the auto hide feature Tabs for auto hidden panels are displayed on the edge of the screen Scrolling over an auto hidden panel tab will cause the panel to fly out You can cause the panel to lock back into its original display position by clicking the icon Clicking the icon hides the panel without a tab Hidden panels can be displayed by selecting them from the drop down menus Panels can be resized moved and combined with other panels creating a workspace that fits your needs To resize a panel scroll the cursor over the edge of the panel until the cursor changes to gt or Then click the left mouse button and drag the panel border to enlarge or reduce its size To move a panel to a different position on the screen scroll the cursor over the title bar of a panel that has not been auto hidden until it changes to Once you click and drag position arrows will display on the screen The four position arrows along the outer edges allow you to place the panel along the given edge independent of the other panels When you drag the panel over a position arrow a transparent blue box will display showing the new panel position If you are satisfied with the position release the left mouse button and the panel will move to its new position You can also move a panel so that it is associated with another panel To do this drag the panel over the panel you
145. uter image drawing speed might decrease when the Anti Aliasing Screen option is selected OSD Setup Select options to display on the screen Load Default Map at Startup Select whether or not the user defined map file is loaded automatically when REVO Remote Pro starts and designate the path of the map file rmp to load e Recording Setup Set up the Use On or Off of the panic recording function and overwriting option of the recording folder On or Off When using the panic recording function and overwriting option REVO Remote Pro continues recording when the hard disk drive is full by overwriting the oldest video Designate a recording folder path and set the recording folder size from 640MB to 2 048MB Capacity shows the remaining space of the recording folder NOTE The recording folder size cannot be changed once it has been set Designate another recording folder path if you want to expand the recording space Recording Mode Setup Set up the panic recording mode e Visible Watch Camera Records camera channels currently displayed on the Watch g Mode Setup screen Visible Watch Camera e User Assignment Setup Records camera channels assigned by the user on the Watch O User Assignment Setup screen O Camera Range Setup e Camera Range Setup Records camera channels within preset channel range Select the boxes beside Camera and adjust camera range up to 16 channels NOTE Panic recoding will NOT be m
146. vious search results from the list 34 16 Channel Digital Video Recorder GO TO sd A wt tad Y Eli lt en gt E ill re hy Go to the First CAMS _ Kare my Go to the Last d E REC S a os Go to the First Selecting Go to the First displays the first recorded image Go to the Last Selecting Go to the Last displays the last recorded image Go to the Date Time a You can use the Left and Right arrow buttons on the remote control to select the year ae month day hours minutes and seconds Use the Up and Down arrow buttons to change a 04 22 2010 01 32 40 PM lt to the date and time you want to search for video Once you have set the date and time so caei press the e button Then select Go and press the button to display the image recorded at the selected time The Playback buttons on the remote control can now be used to review the surrounding video If no video was recorded during the selected time a message appears alerting you that no image was recorded at that time EXPORT A B Backup Selecting A B Backup or pressing the BACK UP button on the remote control during playback will set the starting point of the video to be clip copied and the ff icon displays at the bottom left corner of the screen Selecting 4 B Backup or pressing the BACK UP button again will set the ending point of the video to be clip copied and displays the Backup screen Backup Select
147. want it associated with and the icon with four position arrows will center over that panel Scrolling the cursor over the icon arrows will cause a transparent blue box to display where the panel will be located If you are satisfied with the position release the left mouse button and the panel moves to its new position It is possible to combine panels so that they take up less space on the screen Combined panels have a row of tabs across the bottom Clicking a tab brings that panel to the foreground To combine panels move the cursor to the title bar of the panel you want to move Click and drag the panel onto the panel you want to combine it with Ifthe panels can be combined the four position arrow icon will have a tab symbol in the center Drag the cursor over the tab symbol and a new tab appears Sia 5 on the panel Release the mouse button and the panels will now be combined The layout possibilities are virtually unlimited With a little experimentation you will be able to lay out the screen so that it best meets your workflow Remote Sites Panel Remote Sites i X Mn oS El Remotes ites Remotes te RemoteSite2 E RemoteSites BS Remote Sites Bl Favorite Sites Panel Favorite Sites Favorited Favoritez Favorite BR Favorite Sites Map Panel The Map panel pops up another screen when alarm in motion or video loss events are detected or when you click t
148. will guide you through the steps required to install REYO Remote Pro on your computer WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law Cancel 6 Select whether or not to run REVO Remote Pro automatically when logging onto Windows and then click Next i REVO Remote Pro Installing REVO Remote Pro C Automatically run REVO Remote Pro when log on to Windows 7 Set the language option by selecting either Select language when starting REVO Remote Pro or Always start REVO Remote Pro using the language below If you select Always start REVO Remote Pro using the language below select the desired startup language from the list of available languages and then click OK Language Option Select the language option Select language when starting REVO Remote Pra iv L Language English O Espa ol Spanish OE Frangais French NOTE To properly display the selected language your PC s operating system should be set to support the selected language REVO Remote Pro Remote Administration System 8 When the following dialog box appears after finishing the REVO Remote Pro installation select Install MSXML application and click Finish Installing the MSXML is
149. you set NOTE Selecting Auto Configuration allows the DVR to obtain LAN parameters IP address Gateway Subnet Mask and DNS Server address automatically Selecting Manual Configuration allows you to set up LAN parameters manually NOTE The network configuration you set should be tested by selecting Test otherwise the Next button will not be selected so that you cannot move to the next step e Use DSL PPPOE Setup Selecting the box allows you to set up the DSL network Entering the ID and password for DSL connection will be required REVO Dashboard Setup Select the Next button to start the Dashboard Setup REVO Dashboard Setup II Select New account if you want to create a new Dashboard account and select Existing account if you want to use your existing Dashboard account REVO Dashboard Setup III Enter the User ID and Password for your Dashboard account And then register the DVR you want to access by entering the DVR name and selecting the Register Add a new DVR button 11 User s Manual Select the Finish button to finish the Setup Wizard Network Setup Wizard You have now completed your network setup and created your REVO Dashboard account and or added this DVR to an existing account FOR NEW ACCOUNT please make sure to visit us at to complete activation of your new REVO Dashboard account Once activated you will be able to access your DVR s anytime anywhere using the Internet Click Finish to c
150. you want to include in your search Motion Select the cameras for which you want any reports of motion detection e Video Loss Select the cameras for which you want any reports of lost video Record Channels Select the cameras that you want to search for any reports of event recorded data The DVR will display the events not the camera channels that occurred and that also are recorded on the camera channel that you selected If you do not select a camera channel in this field the DVR will search events that are not associated with cameras e Panic Record Check Recording Check Alarm In Disk Almost Full Disk Bad Disk Temperature Disk S M A R T Fan Error Pressing the e button toggles between On and Off to include or exclude self diagnostic events as part of your search Once you set your desired search conditions select Search and press the e button to display the search results in the Event Log Search screen Selecting Cancel exits the screen without saving the changes 32 16 Channel Digital Video Recorder Record Table Search 08 26 2008 15 08 26 2008 15 Standard View avar O00 Of T Wg maias JEN eye Compact View Expanded View Recording information about video images currently displayed on the screen displays in the recording status bar A grey vertical line indicates the current search position To search for specific video move the vertical line by pressing the Left or Right arrow buttons on the remote

Chapter 1 - Revo America

Contents

Download Pdf Manuals

Related Search

Related Contents