User manual P-link Nano User Guide product code
Contents
1. Content of the package Please check the content of the package before using P Link Nano The package consists in e 2 x P Link Nano adapters e 2 x ethernet cables e 1 x quick start guide 1 x warranty card 2 3 2 System requirements P Link Nano does not have any particular requirement lt can work with any computer or device that has an operative system with network support that is a network card with ethernet port 2 3 3 Connecting P Link Nano This section can help the user in connecting P Link Nano to a computer or other network device In order to connect P Link Nano you need to follow the steps below 1 Use the ethernet cable in the package in order to connect P Link Nano to the ethernet port of your mo dem router and plug the device to power socket 2 Use the ethernet cable in the package in order to connect the second P Link Nano to the ethernet port of your PC or network device and plug P Link Nano in a power socket NOTE Please do not use multiple power sockets because they can interfere with data transmission We suggest to use wall socket in order to achieve the maximum allowed speed 3 Once plugged in 2 P Link Nano adapters as described above the network is fully configured and you can start using it In order to protect encrypt your network please follow the procedure described in section 2 4 1 TELE System 2 4 Advanced usage of P Link Nano Data exchange by using electrical system can be2. e a 2 4 1 1 Protect a new network between 2 P Link Nano 2 4 1 2 Expand an existent network by adding a new P Link Nano o o ooo o 2 4 1 3 Remove a P Link Nano from an existent Network 2 4 2 Facioty ROSEI Tare miria a AA en di RT Ba outs A iaia a a 2 4 3 SPpoediaciease Os ob os La BEE ara E ia eee AO ED Y IO e a Sa s omea SPECION e ato ot a aa dea sE A a e Bee ae aha P Link Nano 1 Safety Regulation We advise you to read the following advice concerning the safety regulations carefully in order to ensure safe use of the appliance ELECTRICAL SUPPLY The appliance should be supplied by using a voltage of 100 240 Volt AC 50 60 Hz The appliance must not be repaired in any way by the user in case of breakages or failures please refer to the nearest center for assistance Do not remove the cover The inside of the appliance could contain higher voltages than that of the supply voltage which could endanger the user The device should be disconnected from the electrical supply before performing any intervention Non authorised removal will mean that the warranty is no longer valid LIQUIDS Keep the appliance far from any liquids Do not place any objects containing liquids on the appliance such as vases humidifiers etc The appliance must not be installed in areas where it could come into contact with sprays or drops of water or in an environment with a high level of humidity where condensation could occur If th
3. 2 ELE System t P link Nano Powerline adapter Manuale utente User manual Dear Customer we would like to thank you for buying our product Please read carefully this user manual before using the device Only by doing so the device can work in the correct way and it can meet all your needs We reccomend you to keep the product box in case you need to send back the device to customer care The Staff of TELE System ATTENTION The maximum speed of the device is 200 Mbps This speed is affected mainly by the quality of your electrical system but also by the place in which you connect the adapter wall socket or multiple power socket This device supports the following products TELE System P Link 0 2 TELE System P Link 0 3 Fuba PLK200 TELE System Electronic Srl states that due to hardware or software changes needed to improve the product itself the user could find differences between the content of this user guide and the product Table of Contents 1 SEE ENGEN ada e ele ini ii ee IIA aaa LA NI dele 2 1 Iniroducion to PLM Nano Sia bh oe rare De en te 2 2 Product Descr bliOni ie ee ee ao 2 3 Basic usage ob P link NAND i 0 a a i E RI de lele Ae 2 3 1 Coment Of tie Package ios e e eA e e E O e ai a 23 2 SYSIEMLISAUTERMENES ws ia ety TR cc Re rec ina Mp gece aka n 2 3 3 SORTIEREN Ph MEMO ot a ela e ee luted e ga a 2d Advanced Usage O P link NaNO a x ur a a a e A a 2 4 1 NEIWOHKENEIYBIION ee E a Rg E ae
4. e device should accidentally come into contact with liquids disconnect immediately from the power socket DO NOT TOUCH the device until it has been disconnected SMALL OBJECTS Keep the receiver away from coins or other small objects Objects which fall into the appliance via the ventilation gaps could cause serious damage CLEANING Before cleaning disconnect the device from the power supply To clean the outside of the reciever use a soft and dry or slightly damp cloth Avoid using products which contain chemicals or solvents VENTILATION Make sure that the area where the appliance is to be installed has good air circulation so that the heat can be dissipate well in order to avoid overheating In order to allow enough ventilation it is necessary to have a distance of at least 10 cm on either side of the appliance and 15cm above the appliance The vents must be kept clear from any obstructions such as newspapers table cloths furnature material curtains carpets etc Avoid installing the receiver close to any heat sources i e radiators stoves etc or on top of any other appliances which omit heat video players DVD etc WARNING Keep the appliance out of reach of children The plastic bags used for packaging can be dangerous To avoid suffocating keep the bags out of reach of children Do not expose the receiver or remote control to direct sunlight The appliance must be placed on a solid and stable base Connect the device to the power supply on
5. encrypted in order to protect the privacy of your network This section can help you in using the Security button on P Link Nano Data encryption can be activated by simply pressing the Security button for 1 3 seconds on all the P Link Nano in your network within 2 minutes 2 4 1 Network encryption In order to encrypt the network among 2 or more P Link Nano simply press security button on each P Link Nano for 1 3 seconds By pressing this button the network will be encrypted with a random password NOTE Powerline adapter cannot be configured in stand by mode All the powerlines are configured with the same default password set by the factory process This is done because if you want to add another P Link Nano in your network you can do it automatically by connecting the new adapter to a power socket without the need of pressing the security button in all the devices in your network Next subsections will describe some possible scenarios 2 4 1 1 Protect a new network between 2 P Link Nano Once that 2 P Link Nano are connected as explained in section 2 3 3 press on each device the security button and held on for 1 3 seconds within 2 minutes Now the network is protected from any unauthorized access 2 4 1 2 Expand an existent network by adding a new P Link Nano If the network is encrypted by using security button press for 1 3 seconds the security button of the powerline to add Now the new P Link Nano is connected to the existent netw
6. if no adapter is used 2 2 Product Description deri n Reset Pair 1 LED for PWR steady green when the device is fully operative blinking green if the device is in stand by mode 2 LED for LAN network steady green when the network connection is active blinking green if data are transmitted 3 LED for PLC connection green when the connection with another P Link Nano is established 4 SECURITY button you can start data protection by pressing this button in order to have more information about the usage of this button please refer to section2 4 1 P Link Nano NOTE All P Link Nano devices to be connected to your network must be connected to the same electrical system P Link Nano automatically switch in stand by mode when it cannot find another active device in your network such as a computer connected to its ethernet port In stand by mode the device cannot be found via electrical system Once a device with ethernet interface is connected to the network P Link Nano automatically will come back to active mode and it can be reached via electrical system 5 Ethernet port RJ45 insert here ethernet cable 2 3 Basic usage of P Link Nano In this section the user can found all the necessary information for installing using and configuring P Link Nano Moreover you can find also the content of the package minimum system requirements and main functionalities of the device such as network protection 2 3 1
7. ly after installation is complete Dispose of the product correctly so as to avoid damage to the environment and human health as well as to facilitate recycling of the components materials used in the appliance If the product is not disposed of properly this could be punishable according to the involved law The manufacturers recommend that the parts are recycled seperately and are taken to sites which conform to current regulations TELE System 2 Installation 2 1 Introduction to P Link Nano P Link Nano is an high performace powerline adapter The data rate up to 200 Mbps make this device suitable to applications that can use intensively your broadband network connection Both at work and at home devices like digital receivers set top boxes or PCs can be connected to P Link Nano by using ethernet interface Moreover the communication between 2 P Link Nano can cover a distance up to 300 meters allowing the user to extend its broadband connection without the need of wiring Which is the main function of powerline adapters With these devices you can configure a network in a fast secure and cheap way without the need of wiring The powerline adapters can reach speed comparable often faster than other LAN tecnologies The installation procedure is plug amp play without any software to be installed and in addition P Link Nano has a low power consumption mode it can reduce its power consumption by switching automatically to stand by mode
8. nvido VI Italy Web www telesystem world com Italy only Tel Assistenza Guasti 199 214 455 Rev 00 24 03 2014
9. ork In order to add other P Link Nano you need to do again the same procedure described above 2 4 1 3 Remove a P Link Nano from an existent network In order to remove a P Link Nano from your network press for 6 10 seconds its security button This device will receive a random password and it will leave the previous network 2 4 2 Factory Reset If you want to come back to factory settings for P Link Nano you can do it by simply press and hold the RESET PAIR button of the device for about 12 seconds that is until the power led blinks 2 4 3 Speed Increase In order to have better performances please follow the suggestions below for avoiding interference issues Avoid multiple power sockets Wall power socket are strongly reccommended in order to have maximum speed Put the PC and or network device not so close to P Link Nano in order to avoid interference Do not use the same multiple power socket for 2 different powerlines P Link Nano 3 Technical Specifications Product Code 23500064 Powerline Adapter TELE System P Link Nano CE conformity declaration TELE System Electronic states that this product meets the basic European requirements of 1999 5 EC including 2004 108 EC EMC Electromagnetic Compatibility and 2006 95 EC LVD Low Voltage Directive 2009 125 CE Eup Erp and 2002 95 UE RoHS Flavio De Poli Chairman AM ITALY TELE System Electronic Srl Via Dell Artigianato 35 36050 Bressa
Download Pdf Manuals
Related Search