IVB9L User Manual 107400434 B.indb
Contents
1. Tests and approvals EC declaration of conformity Make the old cleaner unusable immediately 1 Unplug the cleaner 2 Cut the power cord 3 Do not discard of electrical appliances with household waste As specified in European Directive 2002 96 EC on old elec Et trical and electronic appliances used electrical goods must be collected separately and recycled ecologically Contact your local authorities or your nearest dealer for further in formation Our general conditions of business are applicable with regard to the guarantee Unauthorised modifications to the appliance the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage Electrical tests must be performed in accordance with the provisions of safety regulations VBG4 and to DIN VDE 0701 Part 1 and Part 3 In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications The vacuum cleaner has been approved in accordance with IEC EN 60335 2 69 EC conformity declaration NILFISK ADVANCE A S Sognevej 25 DK 2605 Br ndby Product Vacuum cleaner for wet and dry operation Model IVB 961 0L IVB 965 0L SD XC Description 110 230 240 V 50 60 Hz The design of the machine complies EC Machine Directive 98 37 EC with the following regulations EC Low Voltage Directive 732. Danger that can lead to minor injuries and damage The appliance must e only be used by persons who have been instructed in its correct usage and explicitly commissioned with the task of operating it e only be operated under supervision e not be used by children 1 Do not use any unsafe work techniques 2 Never use the vacuum cleaner without a filter 3 Switch off the appliance and disconnect the mains plug in the following situations Prior to cleaning and servicing Prior to replacing components If foam develops or liquid emerges Besides the operating instructions and the binding accident preven tion regulations valid in the country of use observe recognised regu lations for safety and proper use When dust removers are used the rate at which air is exchanged in the room must be adequate if the exhaust air from the vacuum cleaner is blown into the room please observe regulations valid in your country Before starting work the operating staff must be informed on e use of the vacuum cleaner e risks associated with the material to be picked up e safe disposal of the picked up material The vacuum cleaners described in this operating manual are suit able for e commercial use e g in hotels schools hospitals factories shops offices and rental businesses e for separation of dust with an exposure limit of greater than 1 mg m8 dust class L Any other use is considered as improper use
3. 11 Push the dirt tank as far as possible into the vacuum cleaner 12 Swing the bar B downwards without forcing it 1 Optional accessories Option depending on model 17 IVB9OL IVB9OL 7 2 3 Replacing the filter bag IVB 961 0L During the following work ensure that dust is not unnecessarily spread around Wear a P2 breathing mask If the filter bag has heavy dirt re move the bag by tilting the tank 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors 3 Open the retaining clamps B and remove the upper section of the vacuum clean er Removing the filter bag 4 Carefully remove the filter bag connection from the inlet fitting C 5 Close the filter bag connec tion 1 with the hinged lid 6 Dispose of the filter bag in accordance with legal regu lations Inserting the filter bag 7 Clean the dirt tank 8 Insert the filter bag in the dirt tank 9 Press the bush of the new fil ter bag firmly on to the inlet fitting C 10 Attach the upper section of the vacuum cleaner 11 Close the retaining clamps B Ensure that the retaining clamps fit properly 18 1 Optional accessories Option depending on model 7 2 4 Replacing the disposal bag IVB 965 0L SD XC During the following work ens
4. 23 EC EC EMC Directive 89 336 EC Harmonized standards EN 12100 1 EN 12100 2 EN 60335 1 EN 60335 2 69 EN 55014 1 EN 55014 2 EN 61000 3 2 National standards and technical DIN EN 60335 1 specifications DIN EN 60335 2 69 Anton S rensen General Manager EAPC Technical Operations Br ndby 01 06 2007 22 1 Optional accessories Option depending on model 9 5 Technical data IVB 961 0L 965 0L SD XC 230 EU GB Voltage V 110 GB Mains frequency Hz 50 60 13 GB 230V Fuse A 16 EU 32 GB 110 V j 2x1150 GB 110 V Power consumption WwW 2x1500 EU GB j 2x1000 GB 110 V Power consumption ec W 2x1200 EU GB i 2x2900 GB 110 V Air flow rate l min 2x3600 EU GB 210 21 GB 110 V Vacuum mbar kPa 230 23 EU GB Sound pressure level at a distance of 1 m EN 60704 1 ee 70 Sound level dB A 67 Power cord Length m 10 Power cord Type HO7RN F3G1 5 mm EU GB 230 V Yp H07RN F3G2 5 mm GB 110 V Protection class l Type of protection splash IP X4 water protected Radio interference level EN 55014 1 Tank volume 70 50 Width mm 610 640 Depth mm 645 725 Height mm 985 1020 Weight kg 36 42 9 6 Optional accessories Description Order No Filter bag 5 pcs IVB 961 OL 302002892 Disposal bag 5 pcs IVB 965 OL SD XC 302001480 Filter element 107400562 Cloth insert filter 302002894 Alto Foam Stop 6
5. er Take the accessories out of the dirt tank and the packag ing Attach the suction pipe hold er to the suction pipe Accessory Distance x diamater from pivot joint to the floor nozzle approx cm 38 52 50 47 1 Optional accessories Option depending on model IVB9OL 1 The mains plug should not yet be inserted into a socket 2 Apply parking brakes A on both castors 3 1 3 Inserting the filter bag IVB 961 0L 3 Open the retaining clamps B and remove the upper section of the vacuum clean er 4 Insert the filter bag C in the dirt tank 5 Attach the upper section of the vacuum cleaner 6 Close the retaining clamps B Ensure that the retaining clamps fit properly 1 Optional accessories Option depending on model 9 IVB9OL 3 1 4 Inserting the disposal bag IVB 965 0L SD XC The mains plug should not yet be inserted into a socket Apply parking brakes A on both castors Swing the bar B upwards Use the handle C to pull the dirt tank out of the vacuum cleaner Insert the disposal bag D in the dirt tank Fold the top edge of the dis posal bag over the rim of the dirt tank Push the dirt tank as far as possible into the vacuum cleaner Sw
6. IVB 961 OL IVB 965 0L SD XC Operating Instructions 107400434 B a Wi ONilfisk setting standards Contents 1 Important safety instructions 2 Description 3 Before starting the cleaner 4 Control Operation 5 Applications and methods 6 After using the cleaner 7 Maintenance 8 Troubleshooting 9 Further information 2 1 2 2 3 1 3 1 1 3 1 2 3 1 3 3 1 4 4 1 4 1 1 4 1 2 4 2 4 2 1 4 3 4 3 1 4 3 2 5 1 5 1 1 5 1 2 6 1 7 1 72 7 2 1 7 2 2 7 2 3 7 2 4 7 2 5 erase aa oh teu ea aug chee ea eases eens cad ER EET og rahe 2 Operating elementuri oueienn ere dan EDER 6 Operating Panel eisirean 7 Assembling the vacuum cleaner sssererrerrrsrrernerernnnnee Taking accessories out of the packaging 1r Attaching the suction pipe holder to the suction pipe Inserting the filter bag IVB 961 OL 0 0 ec eeeeeeeeeereeeees 9 Inserting the disposal bag IVB 965 OL SD XC 0 10 COnNeCtioN Sieten S EET 11 Connecting the suction NOSE eeeeeeeeeeeeeeeeeteeeeeteneeeeee 11 Electrical COMMOCTION issia a 11 Switching on the vacuum cleaner ssseseeeerrrrrrrrrnee 11 SWITCH Oe errena a aE dea ER 11 Cleaning the filter element ccceeeceeeeeeeeeeeeeeeeeeeeeeeeee 12 Cleaning the filter element Push amp Clean System VB 96 IFOL irises anen aara a a NEEE 12 Cleaning the filter element XtremeClean VB 965 0L SD XO irsin doene cola 12 TOCNNIGUO Son
7. The manufacturer ac cepts no liability for any damage resulting from such use The risk for such use is borne solely by the user 1 Optional accessories Option depending on model Transport Storage Electrical connection Extension lead Maintenance cleaning and repair Proper use also includes proper operation servicing and repairs as specified by the manufacturer 1 Before transporting the dirt tank close all the locks Do not tilt the cleaner if there is liquid in the dirt tank 3 Do not use a crane hook to lift the cleaner N 1 Store the appliance in a dry place protected from frost 1 Itis recommended that the vacuum cleaner should be connected via a residual current circuit breaker 2 Arrange the electrical parts sockets plugs and couplings and lay down the extension lead so that the protection class is main tained 3 Connectors and couplings of power supply cords and extension leads must be watertight 1 As an extension lead only use the version specified by the man ufacturer or one of a higher quality 2 When using an extension lead check the minimum cross sec tions of the cable Cable lenth Cross section lt 16A lt 25A up to 20 m 1 5 mm 2 5 mm 20 to 50 m 2 5 mm 4 0 mm Electrical tests must be performed in accordance with the provisions of safety regulations BGV A3 and to DIN VDE 0701 Part 1 and Part 3 In accordance with DIN VDE 0702 these tests mus
8. acuum cleaner Damage due to unsuitable mains voltage The appliance can be damaged as a result of being connected to an unsuitable mains voltage 1 Ensure that the voltage shown on the rating plate corre sponds to the voltage of the local mains power supply Picking up liquids IVB 965 0L SD XC Due to their construction vacuum cleaners with a removable tank SD do not have an automatic level indicator There is a risk of damage to the vacuum cleaner due to overfilling or of damage due to leakage of the picked up liquid 1 Never pick up more than 40 litres at once 2 Switch off the vacuum cleaner and empty the dirt tank 1 Optional accessories Option depending on model Hazardous materials Vacuuming up hazardous materials can lead to serious or even fatal injuries 1 The following materials must not be picked up by the vacuum cleaner hazardous dust hot materials burning cigarettes hot ash etc flammable explosive aggressive liquids e g petrol solvents acids alkalis etc flammable explosive dust e g magnesium or alumin ium dust etc Spare parts and accessories The use of non genuine spare parts and accessories can impair the safety of the appliance 1 Only use spare parts and accessories from Nilfisk Ad vance 2 Use only the brushes supplied with the vacuum cleaner or specified in the operating manual Emptying
9. cleaner with out a filter 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors 3 Open the retaining clamps B and remove the upper section of the vacuum clean er Removing the filter element 4 Lay the upper section of the cleaner down with the filter element facing upwards 5 Open the bar handle C and remove it 6 Remove the filter holder D 7 Carefully remove the filter el ement E 8 Dispose of the used filter ele ment in accordance with le gal regulations Inserting the filter element 9 Clean the filter seal F Check it for damage and re place it if necessary 10 Check the antistatic pin G for damage If necessary have it replaced by Nilfisk Advance Service 11 Push new filter element E onto the filter holder 12 Attach filter holder D 13 Attach bar C and close 14 Attach the upper section of the vacuum cleaner 15 Close the retaining clamps B Ensure that the retaining clamps fit properly 1 Optional accessories Option depending on model 8 Troubleshooting Fault Cause Remedy Motor does not start Fuse of the mains socket has blown Overload protect
10. dirt tank Picking up environmentally hazardous materials Materials picked up can present a hazard to the environment 1 Dispose of the dirt in accordance with legal regulations 1 Optional accessories Option depending on model IVB9OL IVB9OL 2 Description 2 1 Operating elements 6 1 Optional accessories Option depending on model IVB9L Handle Applicance switch I 0 II Receptacle for electrical lead Inlet fitting Dirt tank Castor with brake Swivel bar to remove dirt tank Grip to empty tank Handle to remove dirt tank 10 Retaining clamp 11 Suction pipe support 12 Bracket for floor nozzle 13 Accessory holder 14 Clamps and hinges for dirt tank 15 Operating knob for filter cleaning 16 Inlet for fresh air 17 Outlet for waste air OANDOABRWN 2 2 Operating panel 1 Optional accessories Option depending on model 7 IVB9OL 3 1 Assembling the vacuum cleaner 3 1 1 Taking accessories out of the packaging 3 1 2 Attaching the suction pipe holder to the suction pipe 3 Before starting the cleaner Take vacuum cleaner and accessories out of the pack aging The mains plug should not yet be inserted into a socket Apply parking brakes A on both castors Open the retaining clamps B and remove the upper section of the vacuum clean
11. in the frame and close the locks D 9 Attach the upper section of the vacuum cleaner 10 Close the retaining clamps B Ensure that the retaining clamps fit properly 16 1 Optional accessories Option depending on model 7 2 2 Emptying the dirt tank IVB 965 0L SD XC Only after picking up harmless dust After emptying the tank clean the rim of the tank and the seals in the intermediate ring and the upper sec tion of cleaner before refitting them If the seal or groove is dirty or dam aged the suction performance will be reduced Before reinserting the suction hose clean the inlet fitting and hose col lar 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors Removing the dirt tank 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Tipping out the collected dirt WARNING If heavy dirt has been picked up never lift the dirt tank alone Use the FORKLIFT D which is available as an accessory 6 Use a crane or fork lift truck to position the FORKLIFT above the dirt tank 7 Attach the tank to the acces sory 8 Dispose of the dirt in accord ance with legal regulations Inserting the dirt tank 9 Clean the dirt tank 10 Check the seals E between the tank and the upper sec tion of the vacuum cleaner
12. ing the bar B downwards without forcing it 10 1 Optional accessories Option depending on model 4 Operation 4 1 Connections 4 1 1 Connecting the suction hose 4 1 2 Electrical connection The operating voltage shown on the rating plate must correspond to the voltage of the mains power supply 4 2 Switching on the 1 Connect the suction hose 1 Ensure that the cleaner is switched off 2 Insert the power cord into a properly installed and fused socket with earthing contact Switch vacuum cleaner position Function 4 2 1 Switch I 0 II Reduced I e UGE suction 0 Off Maximum II suction 1 Optional accessories Option depending on model 11 IVB9OL IVB9OL 4 3 Cleaning the filter element 4 3 1 Cleaning the filter element Push amp Clean System IVB 961 0L mal A Z A Only for vacuum cleaning without a filter bag and without a cloth insert P u sh amp CI ean filter Filter Cleaning System A Th If suction performance drops 1 Turn switch to position II maximum suction power 2 Close the nozzles or suction hose opening with the palm of your hand 3 Press the button to start filter cleaning three times The resulting stream of air removes attached dust from the slats of the filter elements 4 3 2 Cleaning the filter element XtremeClean a xtremeClean Automatic Filter Cleaning System On
13. ion switch has tripped Motor is faulty Connect mains fuse Switch off the vacuum cleaner and allow it to cool for approx 5 minutes If the cleaner cannot be started again contact the Nilfisk Advance service department Have motor changed by Nilfisk Advance Service Reduced suction power Suction power selected with suction power control is too low Clogged suction hose nozzle gt Tank disposal bag or filter bag is full Filter element is clogged Seal between tank and upper section of vacuum cleaner is faulty or missing Cleaning mechanism is defective Set suction power in accordance with section Setting suction power Clean suction hose nozzle See Emptying tank or Replacing disposal bag filter bag sections See section Cleaning filter element and Replacing filter element Replace seal Contact Nilfisk Advance Service No suction power during wet cleaning IVB 961 0L Tank is full Switch off the cleaner Empty the tank Voltage fluctuations Impedance of power supply is too high e Connect the cleaner to another socket closer to the fuse box Voltage fluctuations over 7 should not occur if the impedance at the transfer point is lt 0 159 1 Optional accessories Option depending on model 21 IVB9OL IVB9OL G 9 9 1 9 2 9 3 9 4 Further information Recycling the cleaner Guarantee
14. ly for vacuum cleaning without a cloth insert filter To ensure that suction performance is always at its best the filter element is automatically cleaned during operation We recommend complete cleaning if the filter element becomes extremely dirty 1 Switch off the vacuum cleaner Close the nozzles or suction hose opening with the palm of your hand Turn the switch to position l and let the cleaner operate for ap prox 10 seconds with the suction hose opening closed 12 1 Optional accessories Option depending on model 5 Applications and techniques 5 1 Techniques 5 1 1 Picking up dry substances 5 1 2 Picking up liquids If used correctly additional accessories suction nozzles and suc tion hoses can enhance the cleaning action and reduce the cleaning effort Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields Here are some basic tips CAUTION Do not pick up flammable substances Before picking up dry substances always ensure that a filter bag is inserted in the tank see section Accessories for order number Disposal of the picked up material is then simple and hygienic After picking up liquids the filter element is wet A damp filter ele ment clogs more quickly when dry substances are picked up For this reason the filter element should be washed and dried or replaced by a dry element before dry subs
15. saina senna dayeenbauns 13 Picking Up dry SUDSTANCES 000 eee eect eee eeeeeeeeeeeeeeeeeees 13 PICKING UP NOUS cacen ER eee cciees 13 Switching the vacuum cleaner off and storage 14 Maintenance plan scossi ens 15 Maintenance Work s ccceceseeeceeeeseeeeeeeeeseeeeeeeeeseeneeeees 16 Emptying the dirt tank IVB 961 OL W W Xu u sssseeerererrrrrnee 16 Emptying the dirt tank IVB 965 OL SD XO 17 Replacing the filter bag IVB 961 OL eceeeeeeeeteeeeeeee 18 Replacing the disposal bag IVB 965 OL SD XC 19 Replacing filter Clerment ccccceeesseeneeeeesseeeeeeeeseeneeeees 20 E asics testi a hevaegieuse vavatinga takes Aeeestented arent ta toon eM santas ae 21 Recycling the Cleaner oa keen 22 Guarantee scii ano a eE p E settee neues 22 Tests and approvals auauna a a REE ds 22 EC declaration of Conformity cccceeceeeeeeeeseeeeeesteeeeeaes 22 TECHNICAL Ata arenaen tate obla veeeeciae nad vere ceeeatlan 23 Optional ACCEsSSorieS asinen aneiens 23 1 Optional accessories Option depending on model IVB9L IVB9OL 1 Important safety instructions Symbols used to mark instructions Purpose and intended use Prior to using the appliance for the first time be sure to read n this document through and keep it ready to hand Danger that leads directly to serious or irreversible injuries or even death Danger that can lead to serious injuries or even death
16. t IVB 965 0L SD XC After finishing work When required 7 2 2 Emptying the dirt tank e 7 2 4 Replacing the disposal bag e 7 2 5 Replacing filter element e 1 Optional accessories Option depending on model 15 IVB9OL 7 2 Maintenance work 7 2 1 Emptying the dirt tank IVB 961 0L Only after picking up harmless dust After emptying the tank clean the rim of the tank and the seals in the intermediate ring and the upper sec tion of cleaner before refitting them If the seal or groove is dirty or dam aged the suction performance will be reduced Before reinserting the suction hose clean the inlet fitting and hose col lar 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors 3 Open the retaining clamps B and remove the upper section of the vacuum clean er Tilting the dirt tank 4 Pull the lever in the handle C upwards and tilt the tank 5 Tip out the collected dirt 6 Dispose of the dirt in accord ance with legal regulations or Removing the dirt tank 4 Open the tank locks D 5 Use the handles E to lift the tank out of the frame 6 Tip out the collected dirt 7 Dispose of the dirt in accord ance with legal regulations 8 Place the empty tank
17. t be performed at regular intervals and after repairs or modifications A dust test must be performed at least once every year by Nilfisk Advance service or a trained person This test includes for example whether there is damage to the filter the vacuum cleaner is sealed to the air and the control equipment works properly During maintenance and cleaning handle the vacuum cleaner in such a manner that there is no danger for maintenance staff or other persons In the maintenance area e use filtered compulsory ventilation e wear protective clothing e clean the maintenance are so that no harmful substances get into the surroundings 1 Optional accessories Option depending on model IVB9OL IVB9OL Risks Electrical components Picking up liquids Electric shock due to faulty mains connecting lead Touching a faulty mains connecting lead can result in serious or even fatal injuries 1 Do not damage the mains power lead e g by driving over it pulling or crushing it 2 Regularly check whether the power cord is damaged or shows signs of ageing 3 Have the faulty mains connecting lead replaced by your Nilfisk Advance service representative or a qualified electrician prior to using the appliance again The upper section of the vacuum cleaner contains live components Contact with live components leads to serious or even fatal injuries 1 Never spray water on to the upper section of the v
18. tances are picked up CAUTION Do not pick up flammable liquids Before liquids are picked up always remove the filter bag disposal bag The use of a separate filter element or filter screen is recommend ed If foam appears stop work immediately and empty the tank To reduce the amount of foam use foam killer Alto Foam Stop see section Accessories for order number 1 Optional accessories Option depending on model 13 IVB9OL IVB9OL 6 After finishing work 1 Switch off the cleaner and pull the mains plug out of the socket 2 Wind up the power cord and hang it on the handle A Begin winding up the cord at the cleaner end and not the plug end to prevent the pow er cord from tangling up 3 Empty the dirt tank and clean the vacuum cleaner 4 After picking up liquids Store the upper section of the vac uum cleaner separately so that the filter element can dry 5 Hang the suction hose with the floor nozzle B in the brackets and pack the acces sories C away 6 Store the cleaner in a dry room where it is protected from unauthorized use 6 1 Switching the vacuum cleaner off and storage 14 1 Optional accessories Option depending on model IVB9OL 7 Maintenance 7 1 Maintenance plan IVB 961 0L After finishing work When required 7 2 1 Emptying the dirt tank e 7 2 3 Replacing the filter bag e 7 2 5 Replacing filter elemen
19. ure that dust is not unnecessarily spread around Wear a P2 breathing mask 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors Removing the disposal bag 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Close the disposal bag with string D and remove it from the dirt tank WARNING If heavy dirt has been picked up never lift the dirt tank alone Use the FORKLIFT E which is available as an accessory 6 Use a crane or fork lift truck to position the FORKLIFT above the dirt tank 7 Attach the tank to the acces sory 8 Dispose of the dirt in accord ance with legal regulations Inserting the disposal bag 9 Clean the dirt tank 10 Check the seals F between the tank and the upper sec tion of the vacuum cleaner 11 Insert the disposal bag G in the dirt tank 12 Fold the top edge of the dis posal bag over the rim of the dirt tank 13 Push the dirt tank as far as possible into the vacuum cleaner 14 Swing the bar B downwards without forcing it 1 Optional accessories Option depending on model 19 IVB9OL IVB9OL 7 2 5 Replacing filter element During the following work ensure that dust is not unnecessarily spread around Wear a P2 breathing mask Never use the vacuum
20. x 1 I 8469 1 Optional accessories Option depending on model 23 IVB9L E Nilfisk Advance A S Sognevej 25 DK 2605 Br ndby fi S Denmark Tel 45 43 23 81 00 3 Fax 45 43 43 77 00 setting standards www nilfisk advance com
Download Pdf Manuals
Related Search