English - BLACK & DECKER® Service
Contents
1. BLACKSDECKER www blackanddecker co uk Intended use Your Black amp Decker chainsaw has been designed for pruning and felling trees and cutting logs This tool is intended for consumer use only Safety instructions General power tool safety warnings A Warning Read all safety warnings and all instructions Failure to follow the warnings and instructions listed below may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in all of the warnings listed below refers to your mains operated corded power tool or battery operated cordless power tool 1 Work area safety a Keep work area clean and well lit Cluttered or dark areas invite accidents b Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes c Keep children and bystanders away while operating a power tool Distractions can cause you to lose control 2 Electrical safety a Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock b2. 90601362 REV 0 Tel 03 8720 5100 Fax 03 9727 5940 Tel 64 9 259 1133 Fax 64 9 259 1122 Tel 01753 511234 Fax 01753 551155 Helpline 01753 574277 08 2013
3. GK2235 GK2240 Black amp Decker declares that these products described under technical data are in compliance with 2006 42 EC EN 60745 1 EN 60745 2 13 2006 42 EC Chain Saw Annex IV DEKRA certification B V Utrechtseweg 310 6802 ED Arnhem The Netherlands Notified Body ID No 0344 Level of accoustic power according to 2000 14 EC Article 13 Annex III Lya measure sound power 104 dB A Lwa guaranteed sound power 107 dB A These products also comply with directive 2004 108 EC amp 2011 65 EU For more information please contact Black amp Decker at the following address or refer to the back of the manual The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black amp Decker Kevin Hewitt 4 Vice President Global Engineering Black amp Decker Europe 210 Bath Road Slough Berkshire SL1 3YD United Kingdom 01 08 2013 Original instructions ETE Guarantee Black amp Decker is confident of the quality of its products and offers an outstanding guarantee This guarantee statement is in addition to and in no way prejudices your statutory rights The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area If a Black amp Decker product becomes defective due to faulty materials workmanship or lack of conformity within 24 months from the date of purchase Black amp Decker guarantees
4. bar and chain fig A E Place the chainsaw onto a stable surface Set the front guard chain brake assembly to the forward position fig D Fully loosen the chain adjust locking knob 9 fig A Remove the chain cover assembly 10 Place the chain 6 over the guide bar 7 making sure that the saw chain cutters on the upper part of the guide bar 7 face towards the front fig B2 Guide the chain 6 around the guide bar 7 and pull it to create a loop to one side at the rear end of the guide bar 7 Guide the chain 6 around the drive sprocket 12 Place the guide bar 7 onto the bar location studs 13 fig B1 Make sure that the sliding nut peg 14 locates into the tensioning hole 15 fig E Warning Make sure that the front guard chain brake assembly 4 is in the set forward position before refitting fig C Place the chain cover assembly 10 onto the chainsaw Turn the chain adjust locking knob 9 to attach the chain cover assembly 10 but do not tighten fully Turn the chain tension adjust screw 5 clockwise until the chain 6 is tight Make sure that the chain 6 is snug around the guide bar 7 Check the tension as described below Do not overtighten Tighten the chain adjust locking knob 9 Checking and adjusting the chain tension fig G Before use and after every 10 minutes of use you must check the chain tension Disconnect the tool from the mains s
5. branches The operator should consider access to the tree limb and the direction of fall The tree branch is liable to swing towards the tree trunk In addition to the user bystanders objects and property below the branch will be at risk To avoid splintering make the first cut in an upward direction to a maximum depth of one third the diameter of the branch Make the second cut downwards to meet the first Logging fig K M How you should cut depends on how the log is supported Use a saw horse whenever possible Always start a cut with the saw chain running and the spiked bumper 17 in contact with the wood fig K To complete the cut use a pivoting action of the spiked bumper against the wood When supported along its whole length Make a downward cut but avoid cutting the earth as this will blunt your saw chain quickly When supported at both ends First cut one third down to avoid splintering and second cut again to meet the first cut When supported at one end First cut one third up to avoid splintering and second cut down to prevent splintering KM When on a slope fig L Always stand on the uphill side When attempting to cut a log on the ground fig L Secure the workpiece using chocks or wedges The user or a bystander should not steady the log by sitting or standing on it Make sure that the saw chain does not contact the ground When using a saw horse fig M This is strongly
6. in considerable danger to the user We recommend you keep this user manual in a safe place Mains plug replacement U K amp Ireland only If a new mains plug needs to be fitted Safely dispose of the old plug Connect the brown lead to the live terminal in the new plug Connect the blue lead to the neutral terminal Warning No connection is to be made to the earth terminal Follow the fitting instructions supplied with good quality plugs Recommended fuse 10 A Protecting the environment Separate collection This product must not be m disposed of with normal household waste Should you find one day that your Black amp Decker product needs replacement or if it is of no further use to you do not dispose of it with household waste Make this product available for separate collection AN 2 Separate collection of used products and packaging 7 allows materials to be recycled and used again Re use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials Local regulations may provide for separate collection of electrical products from the household at municipal waste sites or by the retailer when you purchase a new product Black 8 Decker provides a facility for the collection and recycling of Black amp Decker products once they have reached the end of their working life To take advantage of this service please return your product to any authorised repair agent
7. make sure the saw chain is not contacting anything A moment of inattention while operating the chainsaw may cause entanglement of your clothing or body with the chainsaw Always hold the chainsaw with your right hand on the rear handle and your left hand on the front handle Holding the chainsaw with the reversed hand configuration increases the risk of personal injury and should never be done Hold the power tool by insulated gripping surfaces only because the saw chain may contact hidden wiring or its own cord Saw chains contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock Wear safety glasses and hearing protection Further protective equipment for head hands legs and feet is recommended Adequate protective clothing will reduce personal injury by flying debris or accidental contact with the saw chain Do not operate a chainsaw in a tree Operation of a chainsaw while up in a tree may result in personal injury Always keep proper footing and operate the chainsaw only when standing on fixed secure and level surface Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the chainsaw When cutting a limb that is under tension be alert for spring back When the tension in the wood fibres is released the spring loaded limb may strike the operator and or throw the chainsaw out of control Use extreme caution when cut
8. to replace defective parts repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless The product has been used for trade professional or hire purposes The product has been subjected to misuse or neglect The product has sustained damage through foreign objects substances or accidents Repairs have been attempted by persons other than authorised repair agents or Black 8 Decker service staff To claim on the guarantee you will need to submit proof of purchase to the seller or an authorised repair agent You can check the location of your nearest authorised repair agent by contacting your local Black amp Decker office at the address indicated in this manual Alternatively a list of authorised Black amp Decker repair agents and full details of our after sales service and contacts are available on the Internet at www 2helpU com Please visit our website www blackanddecker co uk to register your new Black amp Decker product and to be kept up to date on new products and special offers Further information on the Black 8 Decker brand and our range of products is available at www blackanddecker co uk Australia Black 8 Decker Australia Pty Ltd 20 Fletcher Road Mooroolbark Victoria 3138 New Zealand Black 8 Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black 8 Decker 210 Bath Road Slough Berkshire SL1 3YD
9. 2 and then push the on off switch 1 to start When the motor starts remove your thumb from the lock button 2 and grip the handle firmly Do not force the tool allow the tool to do the work It will do a better and safer job at the speed for which it is designed Excessive force will stretch the saw chain 6 How to set the chain brake fig C Make sure that the tool is disconnected from the mains supply Pull the front guard chain brake assembly 4 back into the set fig C position The tool is now ready to use How the anti kickback chain brake works In the event of kickback your left hand comes in contact with the front guard pushing it forwards toward the workpiece and stops the tool within a few fractions of a second How to test the anti kickback chain brake fig C Always check that the kickback brake operates correctly before use A Original instructions Grip the tool firmly in both hands on a firm surface make sure the saw chain 6 is clear of the ground and switch on see How to switch the chainsaw on Rotate your left hand forward around the front handle so that the back of your hand comes in contact with the front guard chain brake assembly 4 and push it forwards toward the workpiece fig C The saw chain 6 should stop within a few fractions of a second To reset after the operation of the front guard chain brake assembly 4 follow the instructions for How to set th
10. Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded c Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock d Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock e When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock Original instructions P ENGLISH Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting
11. Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of dust collection can reduce dust related hazards Power tool use and care Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories o
12. e chain brake Note Avoid re starting the tool until you hear the motor come to a complete rest Note If chain brake in malfunctioning take the product to an approved Black amp Decker service centre If the saw chain 6 or guide bar 7 becomes jammed Switch the tool off Disconnect the tool from the mains supply Open the cut with wedges to relieve the strain on the guide bar 7 Do not try to wrench the chainsaw free Start a fresh cut Felling fig H J Inexperienced users should not attempt to fell trees The user may suffer injury or cause damage to property as a result of failure to control the direction of fall the tree may splinter or damaged dead branches may fall during cutting The safe distance between a tree to be felled and bystanders buildings and other objects is at least 2 1 2 times the height of the tree Any bystander building or object within this distance is at risk from being struck by the tree when felled Before attempting to fell a tree Make sure that there are no local by laws or regulations that would prohibit or control the felling of the tree Consider all conditions that may affect the direction of fall including The intended direction of fall The natural lean of the tree Any unusual heavy limb structure or decay Surrounding trees and obstacles including overhead lines and underground drains The wind speed and direction Pre plan a safe exit from falling trees or bra
13. e level in the reservoir should not be allowed to fall below a quarter full Saw chain and guide bar fig G After every few hours of use and before storage remove the guide bar 7 and the saw chain 6 and clean them thoroughly Make sure that the guard is clean and free from debris On reassembling turn the guide bar 7 through 180 and oil sprocket nose via the sprocket lubrication hole 16 This ensures an even distribution of wear around the guide bar rails Saw chain sharpening If you are to get the best possible performance from the tool itis important to keep the teeth of the saw chain sharp Guidance for this procedure is found on the sharpener package For this purpose we recommend the purchase of the Black amp Decker saw chain sharpening kit available from Black amp Decker service agents and selected dealers Replacing worn out saw chains Replacement saw chains are available through retailers or Black 8 Decker service agents Always use genuine spare parts Saw chain sharpness The saw chain cutters will blunt immediately if they touch the ground or a nail while cutting g gt Original instructions Saw chain tension Regularly check the saw chain tension What to do if your chainsaw needs repair Your chainsaw is manufactured in accordance with the relevant safety requirements Repairs should only be carried out by a qualified person using original spare parts otherwise this may result
14. glasses or goggles when operating this tool Always wear ear protection Do not expose the tool to rain or high humidity Always remove the plug from the socket before inspecting a damaged cable Be careful not to use your chainsaw if the cable is damaged Directive 2000 14 EC guaranteed sound power Chain Brake Off ES Chain Brake On Features 1 Lock off button Oil cap Front guard chain brake Chain tension adjustment screw ao On off switch Chain Guide bar Chain sheath Chain adjust locking knob Chain cover assembly Oil level indicator Assembly A A A Warning Always wear protective gloves when working on your chainsaw Warning Before performing any maintenance on power tools switch off and unplug the appliance Warning Remove the cable tie that attaches the chain to the chainbar before assembly B Oiling the chain You must do this whenever you use a new chain 6 for the first time Take the new chain 6 and soak it in chain oil for at least an hour before using it Use Black amp Decker chain oil We recommend that you use only Black amp Decker oil during the lifetime of your chainsaw because mixtures of different oils could lead to the oil becoming degraded which can drastically shorten the lifetime of the saw chain and create additional risks Never use waste oil thick oil or very thin sewing machine oil These may damage your chainsaw Fitting the guide
15. icking the guide bar up and back towards the operator Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator Either of these reactions may cause you to lose control of the chainsaw which could result in serious personal injury Do not rely exclusively upon the safety devices built into your chainsaw As a chainsaw user you should take several steps to keep your cutting jobs free from accident or injury Kickback is the result of tool misuse and or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below Maintain a firm grip with thumbs and fingers encircling the chainsaw handles With both hands on the chainsaw position your body and arm to allow you to resist kickback forces Kickback forces can be controlled by the operator if proper precautions are taken Do not let go of the chainsaw U Do not overreach and do not cut above shoulder height This helps prevent unintended tip contact and enables better control of the chainsaw in unexpected situations Only use replacement guide bars and chains specified by the manufacturer Incorrect replacement guide bars and chains may cause chain breakage and or kickback Follow the manufacturer s sharpening and maintenance instructions for the saw chain Decreasing the depth gauge height can lead to increased kickback Striking metal cement or any other hard material nea
16. nal instructions a Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another The declared vibration emission value may also be used in a preliminary assessment of exposure Warning The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used The vibration level may increase above the level stated When assessing vibration exposure to determine safety measures reguired by 2002 44 EC to protect persons regularly using power tools in employment an estimation of vibration exposure should consider the actual conditions of use and the way the tool is used including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time Electrical safety E This tool is double insulated therefore no earth wire is required Always check that the power supply corresponds to the voltage on the rating plate Ifthe supply cord is damaged it must be replaced by the manufacturer or an authorised Black amp Decker Service Centre in order to avoid a hazard Using an extension cable Always use an approved extension cable suitable for the power input of this tool
17. nches Make sure that the exit route is clear of obstacles that would prevent or hinder movement Remember that wet grass and freshly cut bark is slippery Do not attempt to fell trees where the tree diameter is greater than the cutting length of the chainsaw Cut a direction notch to determine the direction of fall Make a horizontal cut to a depth of between 1 5th and 1 3rd of the diameter of the tree perpendicular to the line of fall at the base of the tree fig H Make a second cut from above to intersect with the first and make a notch of about 45 Make a single horizontal felling cut from the other side 25 mm to 50 mm above the centre of the direction notch fig I Do not cut through to the direction notch you could lose control of the direction of fall Drive a wedge or wedges into the felling cut to open it and drop the tree fig J Pruning trees Make sure that there are no local by laws or regulations that would prohibit or control the pruning of the tree limbs Pruning should only be undertaken by experienced users there is an increased risk of the saw chain pinching and kick back Before pruning consideration should be given to conditions affecting the direction of fall including The length and weight of the branch to be cut Any unusual heavy limb structure or decay Surrounding trees and obstacles including overhead The wind speed and direction The branch being intertwined with other
18. nless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Ensure someone is nearby but at a safe distance in case of an accident If for any reason you have to touch the saw chain make sure your chainsaw is disconnected from the mains The noise from this product can exceed 85 dB A We therefore recommend you take appropriate measures for the protection of hearing Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings These risks can arise from misuse prolonged use etc Even with the application of the relevant safety regulations and the implementation of safety devices certain residual risks can not be avoided These include Injuries caused by touching any rotating moving parts Injuries caused when changing any parts blades or accessories Injuries caused by prolonged use of a tool When using any tool for prolonged periods ensure you take regular breaks Impairment of hearing Health hazards caused by breathing dust developed when using your tool example working with wood especially oak beech and MDF Labels on tool The following pictograms are shown on the tool read the instruction manual Warning To reduce the risk of injury the user must Z Wear safety
19. r the wood or buried in the wood can cause kickback Adull or loose chain can cause kickback Do not try to insert into a previous cut As this could cause kickback Make a fresh cut every time Safety recommendations for the chainsaw We strongly recommend that first time users obtain practical instruction in the use of the chainsaw and protective equipment from an experienced user Initial practice should be completed sawing logs on a saw horse or cradle Always check that the kickback brake operates correctly before use We recommend that when carrying the chainsaw that you make sure that the brake is engaged and the saw chain is facing backwards Maintain your chainsaw when not in use Do not store your chainsaw for any length of time without first removing the saw chain and guide bar which should be kept immersed in oil Store all parts of your chainsaw in a dry secure place out of reach of children We recommend you drain the oil reservoir prior to storage Be sure of your footing and pre plan a safe exit from a falling tree or branches Use wedges to help control felling and prevent binding the guide bar and saw chain in the cut Saw chain care Keep the saw chain sharp and snug on the guide bar Ensure the saw chain and guide bar are clean and well oiled Keep handles dry clean and free from oil and grease Avoid cutting Prepared timber Into the ground Into wire fences nails etc Origi
20. r storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools em ee GAS Original instructions f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 5 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained Additional power tool safety warnings A Warning Additional safety warnings for chainsaws Keep all parts of the body away from the saw chain when the chainsaw is operating Before you start the chainsaw
21. recommended whenever possible Position the log in a stable position Always cut on the outside of the saw horse arms Use clamps or straps to secure the workpiece Troubleshooting Problem Possible cause Possible solution Tool will not start Lock button not Press the lock pressed button Front guard in the Reset front guard brake position Tripped RCD Check RCD Mains lead not Check mains supply connected Check chain tension Chain tension is too slack Oil tank empty Check oil tank level Oil hole blocked Clean oil hole on chain bar Chain tensionis Check chain too tight tension Guide bar Oil the guide bar sprocket sprocket nose nose needs greasing Chain does not stop instantly when the tool is switched off Bar chain appear hot smoking Chain on backwards Chainsaw does not cut well Check modify chain direction nenn Original instructions a Possible cause Possible solution Debris in tank Empty oil from tank and replace Oil hole in cap Remove debris blocked from hole Remove debris Problem Chainsaw not using oil Debris in chain bar and clean the chain bar Debris in oil outlet Maintenance Regular maintenance ensures a long effective life for the tool We recommend you make the following checks on a regular basis Warning Before performing any maintenance on power tools Switch off and disconnect the tool from the mains supply Oil level Th
22. see technical data The extension cable must be suitable for outdoor use and marked accordingly Up to 30 m of HO7RN F 2 X 1 5 mm extension cable can be used without loss of product performance Before use inspect the extension cable for signs of damage wear and ageing Replace the extension cable if damaged or defective When using a cable reel always unwind the cable completely Voltage drops Under certain power supply conditions this product may cause short time voltage drops during start up Other equipment may be affected For example electric lights may temporarily reduce in brightness Contact the supply authority if necessary to determine that the impedance of the power supply is lower than 0 411 ohms Disturbances are unlikely to occur under this condition O a Original instructions Guard against electric shock Prevent body contact with earthed or grounded surfaces e g metal railings lamp posts etc Electric safety can be further improved by using a high sensitivity 30 mA 30mS Residual Current Device RCD Warning The use of an RCD or other circuit breaker unit does not release the operator of your chainsaw from the safety instructions and safe working practices given in this user manual Additional safety instructions This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge u
23. ting brush and saplings The slender material may catch the saw chain and be whipped toward you or pull you off balance Carry the chainsaw by the front handle with the chainsaw switched off and away from your body When transporting or storing the chainsaw always fit the guide bar cover Proper handling of the chainsaw will reduce the likelihood of accidental contact with the moving saw chain Follow instructions for lubricating chain tensioning and changing accessories Improperly tensioned or lubricated chain may either break or increase the chance for kickback Keep handles dry clean and free from oil and grease Greasy oily handles are slippery causing loss of control Cut wood only Do not use chainsaw for purposes not intended For example do not use the chainsaw for cutting plastic masonry or non wood building materials Use of the chainsaw for operations different than intended could result in a hazardous situation Position the cord so that it will not get caught on branches or similar when cutting The spiked bumper 17 may become sharp during the life of the product Handle with care When handling the product the chain bar may become hot handle with care Causes and operator prevention of kickback Kickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain in the cut Tip contact in some cases may cause a sudden reverse reaction k
24. upply Lightly pull on the chain 6 as shown inset fig G The tension is correct when the chain 6 snaps back after being pulled 3 mm away from the guide bar 7 There should be no sag between the guide bar 7 and the chain 6 on the underside Original instructions a Note Do not over tension the chain as this will lead to excessive wear and will reduce the life of the guide bar and the chain Note When the chain is new check the tension freguently after disconnecting from the mains during the first 2 hours of use because a new chain stretches slightly To increase the tension Turn the chain adjust locking knob 9 counterclockwise Tension the chain using the chain tension adjusting screw 5 turn clockwise to tighten Tighten the chain adjust locking knob 9 Use Warning Let the tool work at its own pace Do not overload Filling the oil reservoir fig F Remove the oil cap 3 and fill the reservoir with the recommended chain oil You can see the oil level in the oil level indicator 11 Refit the oil cap 3 Periodically switch off and check the oil level indicator 11 if it is less than a quarter full disconnect your chainsaw from the mains supply and refill with the correct oil Switching on Note It will not be possible to switch the tool on if the front guard chain brake assembly is not in the set position Grip your chainsaw firmly with both hands Push the lock off button
25. who will collect them on our behalf You can check the location of your nearest authorised repair agent by contacting your local Black 8 Decker office at the address indicated in this manual Alternatively a list of authorised Black amp Decker repair agents and full details of our after sales service and contacts are available on the Internet at www 2helpU com Technical data GK1935 GK2235 Typ 3 Typ 3 Bar length cm 35 35 Voltage Vie 230 230 Power input Ww 1900 2200 Chain speed no load mis 9 5 12 5 Max cutting length cm 35 35 Oil capacity ml 250 250 Weight kg 5 2 5 3 Safety class ll ll GK1940 GK2240 Typ 3 Typ 3 Bar length cm 40 40 Voltage Vac 230 230 Power input W 1900 2200 Chain speed no load mis 9 5 12 5 Max cutting length cm 40 40 Oil capacity ml 250 250 Weight kg 5 2 5 3 Safety class ll ll GK1830 Typ 2 Bar length cm 30 Voltage Vac 230 Power input W 1800 Chain speed no load mis 9 5 Max cutting length cm 30 Oil capacity ml 250 Weight kg 5 2 Safety class ll Level of sound pressure according to EN 60745 Sound pressure L 94 dB A uncertainty K 3 dB A Sound power La 105 dB A uncertainty K 3 dB A Vibration total values triax vector sum according to EN 60745 Vibration emission value a 5 m s uncertainty K 1 5 m s gt EC declaration of conformity MACHINERY DIRECTIVE OUTDOOR NOISE DIRECTIVE ce GK1830 GK1935 GK1940
Download Pdf Manuals
Related Search