ZVK-66 - Meyertech
Contents
1. 13 uiui vos Error Bookmark not defined DISPOS A V eet 14 legc 15 WARRANTY 5 5 iicnuiinctuissnceucrkaceti tu aaa Dexia i ae gena dada DN duaceseaudaacuusiussusasuiuensawudsancsdadandeseuanancsduduesuabusnancaseaberests 16 ZVK 66 User Manual Issue 05 Page 3 of 17 Introduction Thank you for purchasing Meyertech s ZVK 66 Please read this user guide prior to using this product It will help you to achieve FEATURES the maximum benefit from the product The manual covers installation operation and maintenance of a ZVK 66 What is a ZVK 66 The ZVK 66 is part of the ZoneVu CCTV Control family Meyertech s new ZVK 66 system keyboard is the latest in the range of next generation ZoneVu products Designed to provide maximum accuracy the ZVK 66 in conjunction with Meyertech s FUSION workstation a PC based GUI application running under Windows is capable of controlling multiple independent PTZF cameras on multiple sites The design of the ZoneVu ZVK 66 Keyboard uses the latest materials and technology available to bring superior levels of functionality and integration to the CCTV control room The features described in this manual refer to Version 1 2 0 0 of the ZVK 66 firmware The information in this manual is believed to be accurate and reliable However M2. Oo 0 11 12 13 Carefully read this Product Manual prior to commencing installation and configuration Before working on this product power it down and remove the power leads Removing panel s modules or PCB s may cause damage to the product and present an electric shock and fire hazard To reduce the risk of electric shock and fire hazard do not operate this product with panels or covers removed Do not install or operate the product near water Do not install or operate this equipment outdoors If work is carried out on the product with panels and covers removed ensure full electrostatic handling procedures are adhered to Louvers and openings are provided in the product enclosures for ventilation purposes to protect it from overheating Under no circumstances block or cover these openings Ensure the product is operated in a suitably temperature controlled environment within the specification limits Do not operate the product in humidity greater then 90 Do not drop objects of any kind through the product louvers and openings This may cause electric shock and fire hazard and product malfunction Avoid liquid spillages on the product This may cause electric shock and fire hazard as well as product malfunction Never attempt to service this product yourself This product contains no serviceable parts Refer all servicing requirements to the Meyertech Service Centre or appointed Meyertech Service Agent Do not operate this
3. press the joystick button to select iris mode The mode of the iris is logged centrally so if the camera is already in manual iris mode the ZVK 66 will enable the user to control it Se MEYERTECH UMITED ZVK 66 User Manual Trouble Shooting Symptom Issue 05 Problem Page 11 of 17 Network flashing MAC address conflict Reassign a MAC address Network LED not lit Device not seeing the network When the keyboard is first plugged in it can take up to a minute to join the network If after this time it has not been detected check wiring PTZ LED permanently lit up even when no network is present Joystick is not calibrated properly Follow the instructions to re calibrate the joystick Iris LED will not light up the mode jumps from focus to zoom The camera is in manual iris Use Fusion to put the camera in manual iris To get from focus to zoom the button has to be pressed twice Network not detected MAC conflict See points above PTZ lights up when the joystick is moved but the camera is not moving Another workstation with an equal or higher priority already has control Request that the camera is released For further assistance please call the Meyertech technical service centre The number can be found in the Support section MEYERTECH UMITED QO MAZ ZVK 66 User Manual Issue 05 Page 12 of 17 Safety Precautions Np oo Ro N
4. the software with other software or on equipment with which it is incompatible To the extent permitted by English law the Seller disclaims all other warranties with respect to the software which it provides pursuant to the Contract either express or implied including but not limited to any implied warranties of satisfactory quality or fitness for any particular purpose The Buyer is solely responsible for various scanning the software that it receives from the Seller pursuant to the Contract The Seller warrants that it will use reasonable skill and care in providing the Services to the buyer Se MEYERTECH UMITED
5. 6 keyboard directly to the Fusion GUI The operator must log on to Fusion at Manager or Engineer level then click on the Setup menu option located at the top left of the screen the operator must then select the keyboard config option This will open a new window that will display the currently configured MAC machine access Setup Help code address of the linked keyboard Keyboard Config Now put the ZVK 66 into configuration mode If communication to the ZVK 66 is successful the display will update to show the current MAC address for the keyboard If you are happy to overwrite this with the Fusion setting press the Link Keyboard to Fusion button If you do not wish to change anything click on close Keyboard Configuration e Link Keyboard to Fusion This will change the MAC of the keyboard to match the MAC currently used by the Fusion Mac address E Termination Fase workstation Version string 1 2 0 0 Keyboard Link Keyboard Details Link above Keyboard with this Fusion workstation Note this configuration screen must be displayed before putting the keyboard into configuration mode Link Keyboard to Fusion Keyboard Functions Calibrate Local Keyboard Close Reading the Version Number The version string of the keyboard is displayed in the Keyboard configuration dialog box When directly connected to Fusion this version number will always be displayed When connected via the ZVK network the ver
6. ZVK 66 User Manual Issue 05 Page 1 of 17 ZVK 66 LIS ER MANUAL mEYERTECH SECURITY with VISION ZAVIKCGG CCTV Keyboard Issue 05 QOMAZ mEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 2 of 17 Contents engl E 2 INTRODUCTION ese 3 WHATIS WAU SL HIE 3 ZVK 66 E Soll 4 Rc 4 IBUEEVILL M 4 CONFIGURATION e 6 Possible Setups E 6 Direct To ZVK NEIWOTK c 6 Connected Direct To BUSIOR iint oer tret E e E ES 6 Network ulnnM T T 7 Putting the Keyboard into configuration mode cerei eee eee eese esee esee tn etna setas tns ts senses stone esses sense ta setas essen 7 Linking to a Workstation PR 8 HOP HIPARHCASOUOIBIITDIS E 8 Rye Mecllncinnime 9 OPERATION uec 10 pp te l IINE Dejexp coe 11 sj giu did iie V nplo ict 12 MAINTENANG E siraan anan
7. al There are no additional requirements beyond safe working practice in the decommissioning of the Meyertech ZVK 66 However the ZVK 66 contains printed circuit boards populated with electronic components The whole unit must be returned to Meyertech Service Centre for final disposal Please follow the normal returns procedure Se MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 15 of 17 Meyertech Limited is a member of the CCTV User Group ser Group Support At Meyertech our staff understand quality support is important to you vital in fact which is why we place such a high precedence on providing it For all matters relating to support go to our website to find the information your require visit http www meyertech co uk support html QO MAZ mEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 16 of 17 Warranty Please refer to Meyertech Limited Terms amp Conditions of Sale of Goods amp Services for interpretation 1 Ifthe Buyer establishes to the Seller s reasonable satisfaction that there is a defect in the materials or workmanship of the Goods manufactured then the Seller shall at its option at its sole discretion and within a reasonable time a arrange for the repair or making good such defect or failure in such Goods free of charge to the Buyer including all costs of transportation of any Goods or materials to and from the Buyer for that purpose b replace such Goods with Goods which are
8. be solely responsible to the entire exclusion of the Seller for complying with the same 7 Forthe purposes of Condition 1 references to Goods shall be deemed to exclude software 8 The Buyer acknowledges that software in general is not error free and agrees that the existence of such errors in the Software Programs shall not constitute a breach of this Contract SS mEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 17 of 17 9 11 12 In the event that the Buyer discovers a material error which results in the Programmed Products not performing substantially in accordance with the Functional Specification or the Licensed Programs not performing substantially in accordance with the relevant Program Documentation and notifies the Seller of the error within 90 days from the date of the Seller making available the respective software to the Buyer the warranty period the Seller shall at its sole option either refund the price which the Buyer has paid to the Seller or if such price has not been paid relieve the Buyer of all obligations to pay the sum in respect of the respective software or use all reasonable endeavours to correct by patch or new release at its option that part of the software which does not so comply provided that such non compliance has not been caused by any modification variation or addition to the software not performed by the Seller or caused by its incorrect use abuse or corruption of the software by use of
9. eyertech Limited assumes no responsibility or liability for its use or for any infringement of patents or other rights of third parties which may result from its use No license is granted by implication or otherwise under any patent or other rights of Meyertech All specifications are subject to change without prior notice MEYERTECH UMITED are committed to continuous product development and therefore reserve the right to change specifications without notice 2007 ALL RIGHTS RESERVED MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 4 of 17 ZVK 66 LAYOUT Joystick The joystick employed in the ZVK 66 is a fully proportional X Y Z joystick providing the operator with independent variable speed control of Pan Tilt Zoom Focus and lris functions It also has a centre mounted button that is used to change the functionality of the twist action LED layout The LED s are split into 2 areas During normal operation the LEDs indicate the following e Status These are on the left side of the keyboard Name Colour Description Off Flashing Status Normal operation PTZ Sending telemetry No telemetry been sent See trouble shooting Joystick not calibrated page 11 Network a Network detected Network not detected See trouble shooting page 11 QO MAZ MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 5 of 17 e Twist Function These are on the right side of the keyboard Name Colour Description Off Flashing Zo
10. in all respects in accordance with the Contract or subject in every case to the remaining provisions of this Condition 1 provided that the liability of the Seller under this Condition 1 shall in no event exceed the purchase price of such Goods and performance of anyone of the above options shall constitute an entire discharge of the Seller s liability under this warranty 2 Condition 1 shall not apply unless the Buyer a notifies the Seller in writing of the alleged defect within 12 twelve months from delivery or such other period or periods as may be agreed in writing between the Seller and the Buyer and b allows the Seller a reasonable opportunity to inspect the relevant Goods 3 Forthe avoidance of doubt the Seller shall be under no liability under the warranty in Condition 1 above a where such defects arise from any drawing design or specification supplied by the Buyer or b where such defects arise from fair wear and tear wilful damage or negligence of a party other than the Seller or its employees or authorised personnel abnormal working conditions failure to follow the Seller s instructions whether oral or in writing misuse or alteration or repair of the Goods without the Seller s approval or c where such defects arise in parts materials or equipment which have not been manufactured or designed by the Seller but have been purchased at the Buyer s request by the Seller from the Buyer s designer and manufacturer or fro
11. libration Note In this mode of operation it is not possible for Fusion to connect to the PC2 port of the Site controller RS232 or IP Se MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 7 of 17 Network Setup This is only required when the keyboard is connected directly to the ZVK network The ZVK 66 requires configuration of the following parameters before use e MAC address e Termination The Module Access code or MAC is required to identify the ZVK 66 to its associated Fusion Workstation The baud rate is automatically detected Valid rates are 9600 19200 and 38400 bps Putting the Keyboard into configuration mode This will only be required when the keyboard is connected directly to the ZVK network 1 Power up the keyboard with the joystick button held down The zoom and focus LEDs will light up and the iris LED will indicate the toggling of the termination state 2 The ZVK 66 will attempt to acquire a new MAC address If no MAC is available the keyboard will keep searching until one becomes available 3 Pressing the button on the joystick will toggle the termination setting the state is displayed in Fusion 4 When the settings are appropriate follow the instructions from your Fusion Workstation 5 Cycle the power on the keyboard to complete the process QO MAZ MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 8 of 17 Linking to a Workstation It is possible to link a ZVK 6
12. m some other third party the Third Party Supplier d ifthe total price of the Goods has not been paid by the due date for payment e in respect of any type of defect damage or wear specifically excluded by the Seller by notice in writing or f ifthe Buyer makes any further use of the Goods after giving notice in accordance with Clause 1 4 Anyrepaired or replaced Goods shall be redelivered to the Buyer free of charge to the original point of delivery but otherwise in accordance with and subject to these Conditions 5 Alternatively to Condition 1 the Seller shall be entitled at its absolute discretion on return of the defective Goods to the Seller at the Seller s request to refund the price of the defective Goods in the event that such price shall already have been paid by the Buyer to the Seller or if such price has not been paid to relieve the Buyer of all obligation to pay the sum by the issue of a credit note in favour of the Buyer in the amount of such price 6 In respect of all Goods supplied to the Seller by a Third Party Supplier the Seller will on request pass on to the Buyer in so far as reasonably possible the benefit of any warranty given to the Seller by such Third Party Supplier and will on request supply to the Buyer details of the terms and conditions of such warranty and copies of any relevant product information sheets technical data sheets or product leaflets issued by such Third Party Supplier and the Buyer shall
13. om Green Twist axis will send Twist axis not in this mode zoom telemetry Focus Green Twist axis will send Twist axis not in this mode focus telemetry Iris Green Twist axis will send iris Twist axis not in this mode telemetry MEYERTECH UMITED QO MAZ ZVK 66 User Manual Issue 05 Page 6 of 17 Configuration The ZVK 66 keyboard has the usual system engineering parameters which are normally configured by the engineer during commissioning When the keyboard is connected direct to the Fusion workstation the MAC and termination are automatically configured Please refer to the Fusion and FusionEdit manuals for how to setup Fusion to work with the ZVK 66 attached directly Please note that an RS422 adaptor is required for the workstation Possible Setups Direct To ZVK Network In this mode of operation the keyboard must be configured to run on the ZVK network The MAC address and termination must be setup using the steps described below RS232 or IP Connected Direct To Fusion In this mode of operation the Fusion workstation should be supplied with an RS422 adaptor in the form of a PCI card or external module The Fusion workstation is connected point to point with the keyboard and supplies all the settings to the keyboard The keyboards MAC address is assigned in FusionEdit and must match the MAC address of the port used on the ZSC 250 The only manual setup that may be required is the joystick ca
14. on tc Keyboard The Keyboard Link section will become active as soon as the keyboard is put into configuration r Keyboard Functions Calibrate Local Keyboard r Advanced Keyboard Functions Force MAC Note this configuration screen must be displayed before putting the keyboard into configuration mode Close Joystick Calibration The joystick is a fully proportional type and as such may require re calibrating from time to time 1 Press the Calibrate local keyboard button 2 All the LEDs except the PTZ LED will go out The PTZ LED will start flashing on the ZVK 66 3 Move the joystick around all the extremes of the axis left right up down clockwise and anti clockwise 4 Press the button on the joystick to finish The keyboard will stop responding for a moment whilst the values are saved 5 Automatically returns to the previous mode of operation QO MAZ mEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 10 of 17 Operation The ZVK 66 keyboard is very simple to operate The joystick is used to send telemetry to the camera that is currently selected by the associated Fusion workstation e Tozoom in and out use the button on the top of the joystick to select zoom mode and then twist the top of the joystick e To focus near and far select the focus mode and use the twist axis e To manually control the iris of a camera use Fusion to put the camera into manual iris mode and then
15. product if 13 1 Any product power leads are damaged 13 2 If the product has been exposed to rain 13 3 If the product has been dropped or the enclosure has been damaged 13 4 If liquid has been spilt on the product 13 5 If the appliance has malfunctioned or is not operating to its functional specification 13 6 If the products cooling fans fail to operate 14 15 16 This product must only be operated with the power supply provided or if supplied without a power supply by the type of power source indicated in the specification Follow all warnings and instructions marked on the product and in this manual To clean the enclosure of the product use a cloth Do not use liquid solvent based cleaners MEYERTECH UMITED QO MAZ ZVK 66 User Manual Issue 05 Page 13 of 17 Maintenance The ZVK 66 requires no Planned Preventive Maintenance periods PPM s as it is mainly solid state in design The ZVK 66 contains no serviceable parts and should be returned to our Service Centre in Scunthorpe for repair or replacement under warranty Any repairs attempted repairs or replaced components not carried out by the Meyertech Service Centre will void all Meyertech warranties and liabilities If your ZVK 66 has to be returned to our Service Centre please follow the returns procedure below otherwise delays may be incurred in returning or replacing the ZVK 66 Se MEYERTECH UMITED ZVK 66 User Manual Issue 05 Page 14 of 17 Dispos
16. sion number will be displayed when the keyboard is in configuration mode MEYERTECH UMITED QO MAZ ZVK 66 User Manual Issue 05 Page 9 of 17 Configuring using FusionEdit It is possible to configure a ZVK 66 keyboard through the FusionEdit GUI Click on the Setup menu option located at the top left of the screen then select the keyboard config option Gi Meyertech Fusion This will open a new window that will display the MAC machine access code Setup Help address and termination setting once they have been selected by the keyboard Keyboard Config JT When the settings are correct press either the Link Fusion to Keyboard or Link Keyboard to Fusion button If you do not wish to save the settings on either piece of equipment click on close e Link Fusion to Keyboard This will save the displayed settings to both the ZVK 66 and Fusion e Link Keyboard to Fusion This will change the MAC of the keyboard to match the MAC currently used by the Fusion workstation Keyboard Configuration m Keyboard Detail cri To put the keyboard into calibration mode press the MAC Address Termination Calibrate local keyboard button This will calibrate the keyboard that is currently linked to the Fusion workstation Keyboard Link The Force MAC button is used to force MAC and Link ROSiGn TS EH GITE ERIGI EE GGG P termination settings onto a keyboard Link Kepnoard to Fusion Link pus
Download Pdf Manuals
Related Search