SpinWise CD Duplicator User Guide
Contents
1. 3 FOR BEST PERFORMANCE awe sedate Sua Aantal ote aden van a Ss 4 CHAPTERS THE BASICS aiian oeaan aaeeea a aa a paaa a anaa eaaa naa anada anakana 5 ONE RVI WV A A ht lik E E E 5 COPYING AMAS TER ai Sm rarahi Sarh 5 LOADING CD ONTO THE HARD 22 7 COPYING FROM A PARTITION ON THE HARD 9 COPYING SELECTED TRACKS A PARTITION ON THE HARD 11 BURNING COMPOSITE CDS FROM A PARTITION ON THE HARD 15 SELECTING THE SOURCE COPY FROM CD ROM OR HARD 18 SELECTING A SPECIFIC HARD DRIVE PARTITION AS THE SOURCE 20 CHAPTER 4 BEYOND THE BASICS wcicccecssc cotcdececssesteeweccetncstesteewe ceeeiaeecateauecene 23 TESTING SIMULATING THE COPY 8 23 TESTING AND COPYING 23 VERIFYING THE TARGET DUPLICATE CDS ac ae 24 COMPARING THE SOURCE AND TARGET AFTER 24 PRESCANNING THE MASTER SOURCE 25 VIEWING THE DISC INFO OF THE MASTER SOURCE 26 CHAPTER 5 U2. ee SpinWise Press the down arrow button to scroll through the functions that are available in the system They appear in the following order Copy Test Test amp Copy Verify Compare Prescan Disc Info Select Source 9 Image when a hard drive is in the duplicator 10 Edit Track 11 Setup Re eB Press the up arrow button to scroll through the functions in the opposite order Pressing the button starts the function that you have selected Pressing the Esc button stops cancels any function that you have started or selected Chapter 2 Started TELEX SpinWise CD Duplicator For Best Performance For best performance quality CDs are a considerable factor Telex recommends Telex Branded Bulk Media CDs recommended for best performance which are available in 300 disc cartons six 50 disc spindle packs TELEX SpinWise CD Duplicator Chapter The Basics Chapter 3 The Basics Overview This chapter provides procedures for the most frequently used functions of the SpinWise CD Duplicator which are as follows Duplicating Copying a CD Copying a CD to the Hard Drive Duplicating from the Hard Drive Copying Selected Tracks to the Hard Drive Burning Composite CDs from a Hard Drive Partition Selecting or Changing the Source Master CD or Hard Drive Selecting a Specific Hard Drive Partition as the Source Copying a Master CD Overview Duplicating Copying from CD to CD
3. Track At Once Wave Yellow Book Under the ISO 9660 a CD ROM sector can be Mode 1 or Mode 2 Mode 1 allocates2048 bytes for user data plus a third layer of error detection and error correction codes This is the Mode that provides the highest integrity for computer data Mode 2 allocates 2336 bytes for user data and no third layer of error detection and error correction This mode is considered appropriate for segments of music graphics and video especially in CD ROM XA and CD I implementations Information in more than one form such as text still images sound animation and video Usually implies that the information is presented by a computer Optical discs are given a clear plastic or lacquer coat that protects the metallic layer Even with this coating small scratches pressure dirt and other markings can make the disc unreadable The coating also prevents air from reaching and oxidizing the metallized layer which would render the disc unreadable With Track at Once writing mode a CD Recorder will record one track at a time In between every two tracks unless you are only recording a single track The CD Recorder laser will stop while the hard disc prepared for the contents of the next track Each time the laser is stopped it writes Run Out blocks When starting again it writes Run In blocks a total of 7 blocks These are ignored by CD ROM readers and so do not disturb data transmission but in some audio players
4. TELEX SpinWise CD Duplicator User Guide Document Number 38110 248 Version Rev A Declaration of Conformity Safety Precautions CE Certification Telex Communications Inc 12000 Portland Avenue South Burnsville MN 55337 Equipment Information Description CD Duplicator Model Number Number of Drives 2 52 NH 2 3 52 H 3 3 52 NH 3 3 52 3 4 52 NH 4 6 52 R 6 7 52 H 7 SpinWise Duplicator products have been tested and found to comply with the Class A digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions contained in this manual may cause harmful interference to radio and television communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning equipment off and on the user is encouraged to try correcting the interference by one or more of the following measures or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the d
5. The 9 03 Image Image Info option is used to examine the contents of the currently displayed hard drive partition How to Use the 9 03 Image Image Info option 1 Use the down arrow button to scroll to 9 lImage function The press the OK button to select it Use the down arrow to display the option 9 03 Image Image Info Press the OK button The LCD Panel displays the Number of Sessions and the Number of Tracks 2 Press the down arrow button to view the total number of minutes and the size of the data in Megabytes 3 Press the down arrow button again to view the tracks in the first session Press the down arrow button again to view the number of minutes in the first track 5 Repeat step 4 for each track and press the OK or the ESC button to exit this option gt 28 TELEX SpinWise CD Duplicator Chapter 5 Using the Hard Drive Partitions as the Source Compare the Partition to the CD The 9 04 Image Compare Image option is used to compare the image data of the target and the current working partition on the hard drive How to Use the 9 04 Image Compare Image option 1 Use the down arrow button to scroll to the 9 lImage function The press the OK button to select it Use the down arrow to display the option 9 04 Image Compare Image Press the OK button Selecting a Hard Drive Partition The 9 05 Image Select Image option is used to select the current working partition of the hard drive How to Use the 9 05 I
6. To learn more about how to select a particular partition on the hard drive see page 20 Chapter The Basics TELEX SpinWise CD Duplicator Loading a CD onto the Hard Drive continued Load the 4 Press the OK button The LCD Panel display will indicate the status of Contents of the load process by displaying the percent of the CD s contents that have a weer been loaded number of tracks that have been loaded etc onto the Har Drive In the following example we can see that the contents of the Master CD are being loaded into partition A of the hard drive This particular snapshot shows that 43 percent of the CD has been copied 9 of the 15 tracks have been copied the present copying speed is 35X and that 26 seconds of track 9 have yet to be copied from the Master CD to the hard drive TELEX SpinWise When the load process is complete the system will beep and display the following message TELEX SpinWise Congratulations You have just loaded a master CD onto the hard drive Remove the 5 Remove the master CD from the Master source drive Master CD Exit the Image 6 Press the ESC button two times to return to the numbered functions list Load Function Use the up or down arrow buttons to set the display to 1 Copy TELEX SpinWise CD Duplicator Chapter The Basics Copying from a Partition on the Hard Drive Overview Initial Operation Mode Select the Hard Drive HDD as
7. 10 4 Close Session 11 Setup 11 1 Language optional 11 2 Burn Speed 11 3 Read Speed 11 4 Auto Start Drive 11 5 Startup Menu 11 6 Auto Verify 11 7 Auto Compare 11 8 Auto Prescan 11 9 Eject Disc 11 10 Burn On The Fly 11 11 Burn Mode 11 12 Button Sound 11 13 Device Info 11 14 System Info 11 15 Quick Erase 11 1 Full Erase 35 TELEX SpinWise CD Duplicator This page intentionally left blank 36 TELEX SpinWise CD Duplicator Glossary Glossary CD CD Duplication CD G CD DA CD R Disc CD Recordable CD ROM CD ROM Disc CD ROM Drive Short for compact disc an optical disc storage format developed by Philips and Sony The process of making one or more copies of a compact disc CD Graphics Audio text and graphics used in the same application This type of disc is usually used for Karaoke machines Compact Disc Digital Audio A CD DA disc contains tracks with audio sectors only In 1982 Philips and Sony introduced the necessary technology for storing digital audio signals on a compact disc and introduced the CD Digital Audio An acronym for compact disc recordable which is a type of media that allows you to record information using a CD Recorder CD Recordable technology allows production of CD ROMs on the desktop one offs It requires a PC a CD R recorder or drive appropriate software and recordable media The reduction of prices for this hardware and software
8. 4 Press the OK button to select the Select Image option and then use the down arrow button to select the letter of the partition where you moved your selected tracks to For example 15 Chapter The Basics TELEX SpinWise CD Duplicator 5 10 Burning Composite CDs from Partition the Hard Drive continued Press the OK button to select the partition The LCD Panel will indicate your choice For example Press the OK button to confirm your choice and then press the ESC button to return to the function list Use the up arrow button to display the 8 Select Source function Press the OK button to select the 8 Select Source function and use the down arrow button to display the hard drive source option Press the OK button to select the hard drive The LCD Panel will display the following Press the OK button to confirm that the source is the hard drive The LCD Panel will redisplay the functions list Use the down arrow button to scroll to the Copy function Note that the Copy function now shows the hard drive partition that you selected as the source for the copy operation 16 TELEX SpinWise CD Duplicator Chapter The Basics Burning Composite CDs from a Partition on the Hard Drive continued Notes to help you set up the system for the next duplicating project 11 Place blank CDs in the available disc drives and press the OK button to start the duplication process The LCD
9. Edit Track Close Session option Use the down arrow button to scroll to the 10 Edit Track function The press the OK button to select it Use the down arrow to display the option 10 04 Edit Track Close Session Press the OK button The LCD Panel displays the prompt Close all discs session Yes If you select Yes then the target CDs in the system cannot be written to anymore Selecting No cancels the option and ejects the disc s 32 TELEX SpinWise CD Duplicator Chapter 7 About the Setup Options Chapter 7 About the Setup Options Overview The 11 Setup function contains options that allow the user to change the original default settings As there are various settings that control the duplicator s operation we suggest using the preset default settings for optimal operation The options are described in this chapter for your reference Language This option allows you to select the language that appears in the LCD Panel The options are English Spanish Burn Speed This option allows you to change the burn speed depending on the CD RW maximum speed support Read Speed The option allows you to control the read speed of the CD ROM depending on the CD ROM maximum speed support Auto Start Drive This option controls whether or not the CD writers will auto start to copy or if the CD writers will test for the blank discs The default setting is OFF Startup Menu This option allows you to select which funct
10. Move operation is complete the LCD Panel displays a confirmation For example Press the OK button which causes the LCD panel to redisplay the Edit Track CD to HDD Edit option Press the ESC button to return to the functions list and then use the down arrow to scroll to the Copy function To Burn CDs from the hard drive partition that has loaded selected tracks refer to page 15 14 TELEX SpinWise CD Duplicator Chapter 3 The Basics Burning Composite CDs from a Partition on the Hard Drive Overview This procedure explains how to make CDs from selected tracks that you ve loaded and moved to a specific partition on the hard drive Refer to page 11 for instructions on how to create a composite CD from selected tracks by loading tracks onto the hard drive Start with the 1 Turnonthe system Note that the copy command is displayed Your Initial Copy LCD Panel display should look like this if your last operation involved Function duplicating from a Master CD Displayed If your last operation involved duplicating CDs from a hard disk partition then the last used partition will be displayed in the LCD Panel In the following example Partition A is the working partition 2 Use the down arrow button to display the 9 Image function 3 Press the OK button to select the 9 Image function Use the down arrow button to display the Select Image option Note that the last used hard drive partition letter is displayed
11. and their ease of use has helped the growth of CD ROM production in house is very different from the mass reproduced or hot pressed CDs It is sold pre grooved in 63 or 74 minute capacities and it involves a layered structure with a sensitive chemical recording layer and almost always with a gold reflective layer Once recorded the CD R disc one off performs in the same way as the mass reproduced CDs Compact Disc Read Only Memory A standard for compact disc to be used as a digital memory medium for personal computers The specifications for CD ROM were first defined in the Yellow Book A CD ROM disc contains only data sectors as defined in the Yellow Book A peripheral device attached to a computer which allows it to read play a CD ROM disc All CD ROM players can also play back audio CDs but you need external headphones or speakers to hear them 37 Compact Disc Compact Disc Formats Digital Audio Digital Audio Extraction DAE Disc Read Head Disc Write Head Disc At Once DAO Glossary TELEX SpinWise CD Duplicator CD stands for compact disc which is a general term for all formats of CD media CD formats available on the market now include CD Audio CD ROM CD ROMXA Video CD CD I and others During the last two decades several Compact Disc formats were developed to serve different purposes and uses Starting with the CD DA format in 1980 as a way to distribute high quality
12. displayed Your Operation LCD display should look like this if your last operation involved Mode duplicating from a Master CD If your last operation involved duplicating CDs from a hard disk partition then the last used partition will be displayed For example Define the 2 Press the down arrow button to scroll to the 8 Select Source function Source 3 Press the OK button to select the 8 Select Source option Use the down arrow button to display the top drive IDE 1 as the Master or source and press the OK button to select the source Press the OK button again to confirm the selected source This step may be skipped if the CD ROM drive was previously defined as the source 5 Place the CD from which you will copy the first track into the top source drive tothe Edit Use the down arrow button to scroll to the 10 Edit Track function and Track then press the OK button to select it Function 11 Chapter Basics TELEX SpinWise CD Duplicator Copying Selected Tracks to a Partition on the Hard Drive continued Selectthe CD 7 The Edit Track CD to CD Edit option appears as the first option to HDD Option within the Edit Track function 8 Press the down arrow button to select the Edit Track CD to HDD Edit option 9 Press the OK button to select the Edit Track CD to HDD Edit option Insert 10 If you have not done so already place the Master CD in the CD ROM Master CD
13. drive top disc drawer The system will read the Master CD and the LCD Panel will display the number of tracks and show the minutes and seconds of the first track For example Select Tracks 11 Use the down arrow button to display the first track that you want to load onto the hard disk In the following example we want to copy track 6 to the hard disk partition 12 Press the OK button to select the track Note that a plus sign appears in front of the track number For example 12 TELEX SpinWise CD Duplicator Chapter The Basics Copying Selected Tracks to a Partition on the Hard Drive continued Load a Track 13 from the Master CD 14 15 16 17 18 Press down arrow key to scroll through rest of track numbers until you see the End option Press the OK button The following appears in the LCD Panel display Press the OK button again The track you selected will be loaded to the hard disk partition Note that the LCD Panel displays the status of the load When the track has been loaded the LCD panel displays the following Press the OK button again You are given the option of copying a track from the next disc To add additional tracks to the partition in the hard drive use the down arrow button to select Yes and press the OK button The disc drawer of the Master will automatically open Remove the Master CD and insert the next Master CD from which you wil
14. is the most frequently used function of the SpinWise system This procedure provides step by step instructions for making duplicates from a Master CD The Copy 1 Turn system Note that the 1 Copy command is displayed Your Function is the LCD display should look like this Default Function TELEX SpinWise The Master 2 Place the Master CD in the top drive This is the drive that functions as Source Drive the Master or source drive The Slave 3 Place one or more blank CDs in the remaining drives It doesn t matter Destination which drive s you use the system will automatically detect which Slave Drive s or destination drives have blank discs in them ready to be copied to Chapter The Basics TELEX SpinWise CD Duplicator Copying a Master CD continued Start the Copy 4 Press the OK button The system will begin by copying information Process from the master CD to the CDs in the slave drives Red lights on the slave drives indicate when information is being written to the discs in those drives The Master drive flashes a green light indicating that it is reading and copying the information In the LCD Panel display the status of the copy operation is indicated For example Duplicates 5 When the copies are produced the slave disc drawers will automatically Produced open and the LCD Panel will display the status of the successful duplication process Remove the 6 Remove the dupl
15. music in a compact and convenient format the first compact disc standard was formulated Then the idea of storing computer data on the same media more than 10 years ago lead to a new format the CD ROM along with CD In the last few years the desire to store a whole new generation of multimedia contents audio video games pictures etc demanded new formats CD I CD XA Photo CD Video CD CD etc were invented Although digital audio can have a variety of sampling rates and quantization the Red Book specifies CD Digital Audio as being sampled at 44 1KHz and quantized at 16 bits sample for high quality stereo sound 65 536 values Therefore sound of different quality even if it is placed in a CD is not Red Book Digital Audio The process of copying CD DA audio tracks digitally from your CD writer or another CD ROM drive to a hard disk or to a recordable CD Not all CD ROM drives support this Storage drives magnetic and optical have a head or heads that float over the recorded area to read and write Obviously CD ROM drives have only a read head which involves a low intensity red laser diode a k a infrared laser diode lenses that focus the laser on the track and others that redirect the reflections to one of the photodiodes for appropriate decoding Some Write Once and Rewritable optical drives involve two heads to write and read while other drives including CD Recordable use only one head to do both using a high
16. which you will be copying from Start with the 1 Turn on the system Note that the Copy function is displayed If your Initial Copy last operation involved duplicating from a Master CD in the CD ROM Function drive then the Copy function appears as follows Displayed If your last operation involved duplicating CDs from a hard disk partition then the last used hard drive partition will be displayed For example Select the 2 Use the down arrow button to scroll to the 8 Select Source function Source to Press the OK button to select the function Copy From Use the down arrow button to select the source you wish to copy from For example to select the hard drive as the source select HDD To select the CD ROM drive as the source select CD ROM 20 TELEX SpinWise CD Duplicator Chapter 3 The Basics Selecting a Specific Hard Drive Partition as the Source continued Source Selection Confirmed Selecting the Partition within the Hard Drive if the Hard Drive is the Source 4 Press the OK button to make your selection The LCD Panel displays a 6 confirmation of your selection For example if you selected the hard drive as the source the following message is displayed If you selected the top Master drive IDE 1 as the source the following message is displayed Press the OK button or the ESC button to redisplay the Select Source function The Copy function will reflect the source as explained in
17. will appear in the LCD Panel 4 Press the ESC button to redisplay the function 25 Chapter 4 Beyond the Basics TELEX SpinWise CD Duplicator Viewing the Disc Info of the Master Source CD The 7 Disc Info function shows the following information about the Master CD Number of sessions Number of tracks Total time in minutes Size of the data on the CD in Megabytes Number of minutes per track Type of data on each track e g AUDIO How to Use the 7 Disc Info function 1 3 4 Place Master CD in CD ROM drive source Use the down arrow to display the 7 Disc Info function Press the OK button to view the number of sessions and total number of tracks on the Master CD Press the OK button again to view the number of sessions and total number minutes and the number of Megabytes of data that are on the Master CD Press the OK button again to view the details of the first session Press the down arrow to view the type of data e g audio and minutes for track 1 press the down arrow again to view the type of data and minutes for track 2 etc Press the ESC button to redisplay the 7 Disc Info function 26 TELEX SpinWise CD Duplicator Chapter 5 Using the Hard Drive Partitions as the Source Chapter 5 Using the Hard Drive Partitions as the Source Overview This chapter pertains to SpinWise systems that contain a hard drive For SpinWise systems that have a hard drive the user can do the followin
18. you might hear a click between tracks This is why disc at Once recording is preferable for audio discs A Wave file WAV is a type of sound file which stores digitized analog signals The book which sets out the standard developed by Philips and Sony for the physical format of compact discs to be used for information storage CD ROM 40 TELEX SpinWise CD Duplicator Index Index ent cee 37 CD 37 37 37 CDR DISC 37 37 CD ROM a 37 ene 37 Compact 38 Compact Disc Formats 38 copying CDs how to copy a CD to 5 Digital ai 38 Digital Audio Extraction 38 Disc Read Head Disc Write 38 38 Disk 39 duplication 1 39 Enhanced 39 39 ICD i bhi skied N 39 TA cca co esa tet aes ae ad dd Mobs Ges 39 installation instructions 2 Jewel a e i 39 MASTOT ai aa r 39 39 MOGE on 40 mode of o
19. D Extra CD Plus hybrid CD interactive music CD mixed mode CD pre gap CD or track zero CD Originally known as Winchester drives these magnetic storage devices have one or more non removable solid platters as opposed to the floppy disk drives Hard drives come in various types different capacities and configurations and are connected to the bus through a controller or interface card There are removable hard drives which allow removal of the component that contains the platters a workable option for users with security concerns High definition Compatible Digital A proprietary method of enhancing audio on CDs Hertz A unit of frequency measurement The number of cycles repetitions per second The plastic clamshell case that holds a CD for shipping or for storage Literally empty orchestra The social sensation from Japan where people sing along to a music track Karaoke was largely responsible for the success of laserdisc in Japan thus supporting it elsewhere The metal disc used to stamp replicas of optical discs The tape used to make additional recordings Technically refers to the process of creating a glass master from which compact discs will be reproduced in quantity In desktop recordable CD systems mastering is done together with premastering by the desktop CD recorder and the term is generally used to mean recording 39 Glossary TELEX SpinWise CD Duplicator Mode Multimedia Protective Coating
20. MENU a AEE EE EE EEE EA E A EA 33 AUTO 33 COMPARE ERD LR Ad 33 AUTO 33 EJECT DISC 34 BIN ose odin baa 34 BURNIMODE tt Sa tah 34 BUTTON SOUND ested 34 DEVIGE INEO ea Hebd ten 34 SYSTEMINE Ol ei cos send sted 34 QUICK ERASE veces cc uh Gove Geese as 34 ERAS Eis rs eee ve 34 APPENDIX A OVERVIEW OF THE SPINWISE FUNCTIONS 35 E 37 41 iv TELEX SpinWise CD Duplicator Chapter 1 Introduction Chapter 1 Introduction Introducing the SpinWise CD Duplicator Systems SpinWise CD Duplicator systems enable you to copy CDs up to 52X speed They are available in the configurations listed in Table 1 shown below w
21. Panel displays the status of the burn process 12 The SpinWise system will automatically eject all successful copies of the burn process and the LCD Panel will display the finished status In the following example six duplicates were successfully burned from partition J of the hard drive Depending on your next task using the SpinWise CD duplicator you may need to use the Select Source function to identify a different partition of the hard drive or to identify the top Master drive as the source for your next duplicating project To identify a different partition of the hard drive use the Image function and then use the Select Image option to select a different working hard drive partition 17 Chapter The Basics TELEX SpinWise CD Duplicator Selecting the Source to Copy From CD ROM or Hard Drive Overview This procedure explains how to change the source drive The top drive is the default drive when shipped Start with the 1 Turn on the system Note that the Copy function is displayed If your Initial Copy last operation involved duplicating from a Master CD in the CD ROM Function drive then the Copy function appears as follows Displayed If your last operation involved duplicating CDs from a hard disk partition then the last used hard drive partition will be displayed For example Select the 2 Use the down arrow button to scroll to the 8 Select Source function Source to 3 Press the OK button to s
22. SING THE HARD DRIVE PARTITIONS AS THE 27 ota lh 27 LOADING A CD IMAGE INTO A PARTITION OF THE HARD 28 DELETE THE CONTENTS OF A HARD DRIVE 28 REVIEW THE CONTENTS OF PARTITION conceit 28 COMPARE THE PARTITION TO THE a 29 SELECTING A HARD DRIVE PARTITION eat 29 CHAPTER 6 EDITING TRACKS ei ici ccccccccctecccitctaesecectccseetsnencnse ates ccutetaedessatnseeteacesecssttenseeds 31 te ute thts tse Kemi oe ree acca i see Pac sh cee eon cna eet aac 31 COPYING TRACKS MASTER CD TARGET 31 PLAYING AN AUDIO TRACK os2c fs sencectsxsesschadetencevgetys anuaeeeuehs ervesis decnnesacqeveuss 32 CLOSING A SESSION AA aia 32 iii CHAPTER 7 ABOUT THE SETUP OPTIONS 33 OVERVIEW tla teal td at tent 33 33 BURN SPEED ha BLS I hg AON we SS Sd 33 READS PEED ails tet ea cca rs ca tea tad 33 dante haga does 33 STARTUP
23. ard is completed and returned to Telex Communications Inc within 90 days from the date of purchase The warranty is not applicable to defects or malfunctions caused by misuse accidents or system changes by the end user Telex is not responsible for damages to data or related content by the SpinWise system You can register your SpinWise product online at www telex com duplication Click on the online warranty registration link Note Telex assumes no responsibility for the illegal copying and distribution of audio video and text graphics data Technical Support For detailed technical support or questions regarding the SpinWise CD Duplicator contact Telex Technical Support at 1 800 828 6107 ext 5549 952 887 5549 TELEX SpinWise CD Duplicator Chapter 2 Getting Started Chapter 2 Getting Started Turning on the System Plug the AC cord into the SpinWise system and then into a wall outlet Press the ON OFF button located in the bottom right corner of the tower unit The LCD Panel display will light up indicator lights on each of the CD disc drives will flash momentarily the ON indicator light next to the ON OFF button will be lit and the LCD Panel Display will indicate that it is initializing and detecting drives It is ready for operation when the LCD Panel displays 1 Copy About the LCD Panel Display When you first turn the system on the information displayed in the LCD Panel will indicate that Copy function is selected
24. d drive In this chapter you will learn how to use the following additional Edit Track options Copy a track from a Master CD to a target CD 10 01 Edit Track CD to CD Edit page Play an Audio Track 10 03 Edit Track Play Audio Track page xx Close a session 10 04 Edit Track Close Session page xx Copying Tracks Master CD to Target CD The 10 01 Edit Track CD to CD Edit option is used to combine tracks on different CDs onto a single CD For example you can make a collection of favorite songs from different music CDs and store them onto one CD How to 1 2 Use the 10 01 Edit Track to Edit option Place the Master CD in the CD ROM drive and a blank CD in a target CD drive Use the down arrow button to scroll to the 10 Edit Track function The press the OK button to select it The LCD Panel displays the first Edit Track option 10 01 Edit Track CD to CD Edit Press the OK button The LCD Panel displays the contents of the Master CD and prompts you to select a track Use the down arrow button to select the track number and then press the OK button to select it Do this for each track you wish to select Use the down arrow to scroll to the end of the list of tracks When End appears in the LCD Panel press the OK button The system prompts you with the message End edit disc and burn Yes Press the OK button to start the burn When the selected track has been copied from the Master CD
25. ealer or an experienced radio TV technician help You may find helpful the following booklet How to Identify and Resolve Radio TV Interference Problems It is available from the U S Government Printing Office Washington D C 20402 stock number 004 000 00345 4 Warning Changes or modifications to this unit not expressly approved by Telex Communications Inc could void the warranty SpinWise Duplicator products are high precision electronic devices Do not use them in any manner other than as specified in this manual Please read this manual in its entirety before using the SpinWise system To prevent fire or shock do not expose the unit to moisture or rain To prevent electrical shock do not attempt to disassemble the duplicator or any of its internal components Refer servicing to authorized personnel The internal drives utilize a laser beam that can be harmful to the eyes Do not disassemble the unit Do not attempt to look through the front panel or into the unit while the power is turned on A user who changes or modifies the unit or operation procedures specified herein without express written approval by the manufacturer will void the user authority to operate the equipment Specifications and features subject to change without notice or obligation This product has been tested and complies with the requirements of The EMC Directive 89 336 EEC EN55022 Radiated and Conducted Emissions A EN55024 Generic I
26. elect the function Copy From Use the down arrow button to select the source you wish to copy from For example to select the hard drive as the source select HDD To select one of the CD ROM drives as the source press the down arrow button to cycle through the available source drives 18 TELEX SpinWise CD Duplicator Chapter The Basics Selecting the Source to Copy From continued Source Selection Confirmed Selecting the Partition within the Hard Drive if the Hard Drive is the Source 4 Press the OK button to make your selection The LCD Panel displays a 6 confirmation of your selection For example if you selected the hard drive as the source the following message is displayed If you selected the CD ROM as the source the following message is displayed Press the OK button or the ESC button to return to redisplay the Select Source function The copy function will reflect the source as explained in step 1 If you have selected the hard drive as your source you must make sure to specify which partition in the hard drive you intend to use as your source using the Image function This procedure is explained on page 20 Selecting a Specific Hard Drive Partition as the Source 19 Chapter The Basics TELEX SpinWise CD Duplicator Selecting a Specific Hard Drive Partition as the Source Overview This procedure explains how to select a specific partition on the hard drive as the source from
27. finished 23 Chapter 4 Beyond the Basics TELEX SpinWise CD Duplicator Verifying the Target Duplicate CDs The 4 Verify function is used to examine if the target CDs can be read correctly after copying How to Use the 4 Verfiy function 1 Begin by copying a Master CD data from a partition in hard drive to a target slave destination CD You can use the 1 Copy function or the 3 Test and Copy function to do this When the copy process is done the system will automatically eject the duplicated disc s Press the ESC button to redisplay the function and re insert the disc s Use the down arrow button to display the 4 Verfiy function and press the OK button to start the Verify process The SpinWise system will start to verify the CDs in the target drives The LCD Panel will display the verify process information and the results It will automatically open all disc drives of the verified discs when the process is complete Comparing the Source and Target after Copying The 5 Compare function compares the source CD and the target CD after copying How to Use the 5 Compare function 1 Begin by copying Master CD to a target slave destination CD You can use 1 Copy function or the 3 Test and Copy function to do this Press the ESC button to redisplay the function Ensure that the source and the copied target CDs are in their respective drives Use the down arrow button to scroll down to the 5 Compare func
28. g Load a into a specific partition of the hard drive 9 01 Image Load page 28 Delete the contents of a partition on the hard drive 9 02 Delete Image page 28 Review the contents of a partition on the hard drive such as number of sessions number of tracks total number of minutes and size of the data in megabytes 9 03 Image Info page 28 Compare the contents of the working partition with the contents of the target CD 9 04 Compare Image page 29 Select a Hard Drive Partition Image 9 05 Select Image page 29 Select the Image Source Drive 9 06 Image Src Drive page 30 The hard drive in the SpinWise CD Duplicator system contains 36 partitions Each partition can store one gigabyte of data Therefore you can load as many as 36 CDs into the hard drive And you can duplicate the information that is in a particular partition onto all available CD drives at once Each partition in the hard drive is labeled as shown at right Hard Drive Partition Label lt lt 2 lt lt lt gt 27 Chapter 5 Using the Hard Drive Partitions as the Source TELEX SpinWise CD Duplicator Loading a CD Image into a Partition of the Hard Drive The 9 01 Image Load option is used to load the data from a Master CD to a partition on the ha
29. he available disc drives and press the OK button The system will scan for blank CDs and then write to those CDs copying the data from the displayed partition letter of the hard drive Note that the CD drives that are being written to from the hard drive have a red light indicating that the copy session is in progress The status of the copy operation is indicated in the LCD Panel Display In the following example the snapshot shows that 44 of the data in hard drive partition A which includes 7 out of 15 total tracks and 37 seconds of track 7 remain to be copied from the partition of the hard drive When the copy process completes the disc drawers will automatically open and the LCD Panel display will indicate the status In the following example 7 CDs were successfully written to from partition A of the hard drive Congratulations You have learned how to use the hard drive to make CD duplicates Press the ESC button and note that the system is still set to copy from partition A unless you select a different source using the 8 Select Source function 10 TELEX SpinWise CD Duplicator Chapter The Basics Copying Selected Tracks to a Partition on the Hard Drive Overview This procedure applies to SpinWise systems that contain a hard drive It explains how to identify and copy selected tracks from multiple CDs into a partition on the hard drive Note the Initial 1 Turnon the system Note that the copy command is
30. hich shows how many CD copies can be made at once number of target drives and whether or not a 40 Gigabyte hard drive is included in the system configuration If your system includes the hard drive you can load the original CD onto the hard drive and use all of the available CD drives to duplicate multiple CDs all at once The hard drive has 36 partitions of one gigabyte each You can load up to 36 CDs in the hard drive and duplicate from one partition at a time You can also use each partition in the hard drive to load selected tracks from any number of CDs and then duplicate the loaded tracks to multiple CDs If your system does not include a hard drive you can use the first CD drive as the reader and the remaining drives for duplication Model Number Includes 40 Gigabyte Dimensions Weight Number A HxWxD 2 52 NH 2 x 6 x7 x 11 12 Ibs 3 52 H 3 x 10 3 8 x 7 x 15 16 Ibs 3 52 NH 3 x 10 3 8 x 7 x 15 16 Ibs 3 52 3 x 5 x 19 x 15 12 22 Ibs 4 52 NH 4 x 13 x 7 x 18 29 Ibs 5 52 5 x 5 x 19 15 2 29 Ibs 7 52 H 7 x 17 x 17 x 18 40 Ibs 7 52 NH 7 x 17 x17 x 18 40 Ibs Table 1 SpinWise System Configurations Features Up to 52X recording speed Disk At Once support for audio Support for multiple CD formats including CD G compact disc and graphics Karaoke Cooling fans Audio track extracti
31. icated CD s from the drive s and close the drive s a using the open close button on the CD drive s Congratulations You have just copied a master CD Remove the 7 Unless you intend to make more copies of the same master CD remove Master CD the master CD from the Master source drive End Copy 8 Press the ESC button to return to the Copy function Session TELEX SpinWise CD Duplicator Chapter 3 The Basics Loading a CD onto the Hard Drive Overview The Initial Default Function Insert the Master CD Select the Image Load Function This procedure applies to SpinWise systems that have a hard drive It explains how to copy the contents of a CD into a partition on the hard drive Once a CD is copied to the hard drive it is easy to make duplicates using all of the available CD drives 1 Turn system Note that the copy command is displayed Your LCD display should look like this lt SpinWise 2 Place the CD to be Loaded onto the Hard Drive into the Master Source Drive the top drive of your SpinWise system 3 Use the down arrow button to display the Image function SpinWise Then press the OK button to select the Image function Note that the LCD Panel display shows which partition of the hard drive the CDs contents image will be loaded into In the following example the Image will be loaded into hard drive partition A SpinWise
32. intensity blue argon laser for the write function For mass replication of CD Audio CD ROM and DVDs the glass master is produced by encoders that have special recording heads A method of writing in which one or more tracks are written in a single operation The laser will not stop until the whole disc recording is finished and the disc is closed hence no clicks between audio tracks Disc at Once has only been added available with the recent generation of CD recorders and recent firmware upgrades TELEX SpinWise CD Duplicator Glossary Disk Sector Emulate Enhanced CD Hard Drives HDCD Jewel Box Case Karaoke Master Mastering In magnetic disks formatting provides a geography of the platters which are divided into concentric circles and these circles are further subdivided into sectors Although sectors vary in size depending on their position in the disk they have a specific capacity in bytes This sectored framework is found in constant angular velocity CAV drives and is compatible with the FAT used in PCs When discussing optical discs sector is used to refer to discrete amounts of data with a specific layout or structure along the single spiral track To test the function of a disc on a computer after formatting a complete disc image A general term for various techniques that add computer software to a music CD producing a disc which can be played in a music player or read by a computer Also called C
33. ion will appear at system startup The default is the Copy function Auto Verify This option controls the auto verify of the target CDs which verifies if they can be read correctly in the CD ROM drive after copying The default setting is OFF Auto Compare This option controls the auto compare of the data between the Master CD and the target CDs after a copy operation The default setting is OFF Auto Prescan This option controls the auto prescan of the master disc to see if it can be read correctly and it tests the reading speed The default setting is OFF 33 Chapter 7 About the Setup Options TELEX SpinWise CD Duplicator Eject Disc This option controls the ejection of the discs by the CD writer Three settings are available the default setting is the Eject Good Only setting which will only eject the passed discs automatically and leave the failed ones in the CD writers the Eject All Disc setting will eject all discs whether or not they passed or failed the Do Not Eject setting causes all the discs to remain in the CD writers when the job is done and the user will have to eject the discs manually Burn On The Fly This option controls the writing methods to the CD When this setting is ON the data will direct copy from the source drive to the target drives When the setting is OFF the data will load into a particular temporary partition in the hard drive and then the copied data will come from the so
34. l select tracks to copy Repeat steps 10 to 15 to add more tracks If you do not have any more tracks to add from a Master CD then use the down arrow to select No and press the OK button 13 Chapter Basics TELEX SpinWise CD Duplicator Copying Selected Tracks to a Partition on the Hard Drive continued Moving the Selected Tracks toa Partition Exit the Edit Track CD to HDD Edit Function Burning CDs 19 20 21 You can immediately burn the tracks you ve loaded onto the hard disk or you can move them to a partition in the hard disk for burning copying later If you elect to burn duplicates of the selected tracks that you ve loaded onto the hard drive place blank CDs in the available drives and then press the OK button If you elect move the selected tracks that you ve loaded onto the hard drive to a partition use the down arrow button to select Move and then press the OK button Refer step 20to continue When you elect to move the selected tracks to a partition the LCD Panel will display the last selected hard drive partition as the default To select a different partition than the one displayed press the down arrow button to select the partition letter of your choice and then press the OK button In the following example we selected partition letter J to move our selected tracks to The status of the move operation appears in the LCD display For example When the
35. mage Select Image option 1 Use the down arrow button to scroll to the 9 1 function The press the OK button to select it Use the down arrow to display the option 9 05 Image Select Image Press the OK button The LCD Panel displays the prompt Select Working Partition 2 Use down arrow button to display the desired working partition Then press the OK button to select it 3 Press the OK button again to confirm you choice of the current working partition 29 Chapter 5 Using the Hard Drive Partitions as the Source TELEX SpinWise CD Duplicator Selecting the Image Source Drive The 9 06 Image Image Src Drive option is used to select the particular drive to be the master source from which the data will be coming from How to Use the 06 Image Image Src Drive option 1 Use the down arrow button to scroll to the 9 lmage function The press the OK button to select it Use the down arrow to display the option 06 Image Image Src Drive Press the OK button The LCD Panel displays the prompt Select Img Sre 2 Use the down arrow button to display the desired image source Then press the OK button to select it 3 Press the OK button again to confirm you choice of the current working partition 30 TELEX SpinWise CD Duplicator Chapter 6 Editing Tracks Chapter 6 Overview Editing Tracks In Chapter 3 you learned how to copy selected tracks from master CDs to a particular partition on the har
36. mmunity ESD RF and Transient Susceptibility and Low Voltage Directive Product Safety EN60950 Copyright Trademarks Copyright Telex Communications Inc All rights reserved Printing 06 03 The SpinWise CD Duplicator is used only for copying personal data and audio tracks Violation of the International Copyright Laws is a criminal charge The SpinWise CD Duplicator is intended to be used only in legal copying situations Telex Communications Inc is not responsible for the illegal use or any damage in connection with the use or performance of this system SpinWise is a registered trademark of Telex Communications Inc ii Table of Contents CHAPTER 1 INTRODUCTION 1 INTRODUCING THE SPINWISE DUPLICATOR 1 at cent 1 SYSTEM SPECIFICATIONS ity aaa 2 INSTALLATION INSTRUCTIONS ote tut ea ays he ea 2 WARRANTY INFORMATION c ee ana io eed cane tt Get arta 2 TECHNICAL SUPPORT 2 CHAPTER 2 GETTING STAR BED oi 3 TURNING ON THE SYSTEM 3 ABOUT THE LCD PANEL 25
37. on for music disc compilation Chapter 1 Introduction TELEX SpinWise CD Duplicator System Specifications Power 115 230 VAC 0 5 Amp 50 60 Hz Duplication Speeds Up to 52X recording speed CD Formats Support for multiple CD formats including CD G Karaoke Other Disc At Once support for Audio Copy Copy and Compare Verification Emulation and Load to Hard Drive are supported All sizes of business card CD format are supported Installation Instructions Unpack the SpinWise system in a clean working area with moderate temperature control Confirm that the following items have been shipped with the system power cable user manual and warranty card Confirm that the voltage setting AC 115 230V is correct Confirm that the power input is stable and consistent Install an uninterruptible power supply UPS if necessary Make sure that the environment for the SpinWise system is properly ventilated and free of dust excessive heat and humidity and electronic interference Make sure the system is properly grounded Do not attempt to defeat the third ground prong on the power cable The system is shipped in professionally designed foam based external packaging Please keep and store this packaging for future transport or storage of the system Warranty Information The SpinWise system is guaranteed to be free from defect in materials and workmanship for one year This warranty is applicable when the warranty registration c
38. peration current mode 3 5 7 8 E N 40 Protective Coating 40 system 1 technical 1 2 40 warranty 2 WAVE 40 Yelow 40 41
39. rd drive How to Use the 9 01 Image Load option 1 Use the down arrow button to scroll down to the 9 Image function Then press the OK button to select it The option 9 01 Image Load is the first option presented within the Image function 2 Place a Master CD in the CD ROM drive top disc drawer 3 Press OK to start the load process If the selected partition is already written to then select another working partition and press the OK button to select it Press the OK button again to confirm your selection Press the OK button again to start the Load of the Master CDs contents to the partition displayed in the LCD Panel 4 The LCD Panel displays the status of the load process and when the load is finished the LCD will show the results Delete the Contents of a Hard Drive Partition The 9 02 Image Delete Image option is used to delete the data image stored in the currently displayed partition of the hard drive How to Use the 9 02 Image Delete Image option 1 Use the down arrow button to scroll to the 9 lmage function The press the OK button to select it Use the down arrow to display the option 9 02 Image Delete Image Press the OK button 2 At system prompt Delete Image in Partition Yes Use the down arrow button to display No and then press the OK button to cancel the option or if Yes then press the OK button and the data in the displayed partition is immediately deleted Review the Contents of a Partition
40. step 1 If you have selected the hard drive as your source you must make sure to specify which partition in the hard drive you intend to use as your source using the Image function Use down arrow button to scroll to the 9 lmage function and press the OK button to select the function Use the down arrow button to scroll to the Select Image option For example Press the OK button to select this option and use the down arrow button to display the letter of the partition in the hard drive that you wish to use as the source For example Press the OK button to select the displayed partition The LCD Panel will confirm your selection For example 21 Chapter The Basics TELEX SpinWise CD Duplicator Selecting a Specific Hard Drive Partition as the Source continued Note the Source Partition listed with the Copy Function Press the ESC button twice to return to the Image function Then use the down arrow button to scroll to the Copy function Note that the partition you selected is displayed with the Copy function For example 22 TELEX SpinWise CD Duplicator Chapter 4 Beyond the Basics Chapter 4 Beyond the Basics Testing Simulating the Copy Process The 2 Test function is used to simulate the copying process When the simulation test finishes no data will be written to the CD How to Use the 2 Test function 1 Use the down arrow button to scroll down to the 2 Test option 2 The system
41. the Source This procedure applies to SpinWise systems that have a hard drive It explains how to copy a CD that has been loaded into a partition on the hard drive to blank CDs in all of the available CD drives in the system 1 Turn system Note that the copy command is displayed Your LCD display should look like this 2 Use the down arrow button to display the 8 Select Source function Your LCD display should look like this 3 Press the OK button and then press the down arrow key to select the HDD Source For example your LCD display should look like this 4 Press the OK button again to confirm that the hard drive is selected 5 Then press the ESC button to return to the list of functions and use the up or down arrow keys to redisplay the 1 Copy function Note that the Copy function now indicates the hard disc source of data In the following example the hard disk partition that is the Source is partition A The Copy function is indicating that it will be copying from Partition A of the hard drive To learn how to select a different partition refer to page 20 Chapter Basics TELEX SpinWise CD Duplicator Copying from a Partition on the Hard Drive continued Insert Blank CDs in the Disc Drives and Start the Copy Process Remove the Duplicates from the Disc Drawers Exit the Copy Function 6 T 8 With the Copy function displayed in the LCD Panel place blank CDs in t
42. tion and press the OK button to start the Compare process The LCD Panel will display the compare information and the results When the process completes the target CDs will be automatically ejected Press the OK button to view the detail of the Compare information If the compare result is identical then the LCD Panel will display the message Identical If the result of the compare process is Fail then the message will show the number of discs that failed and succeeded Press the OK button to view the detail of the Compare information If the compare failed the LCD panel will display the reason of the failure such as TOC not match Press the ESC button to redisplay the 5 Compare function 24 TELEX SpinWise CD Duplicator Chapter 4 Beyond the Basics Prescanning the Master Source CD The 6 Prescan function is used to scan the master source CD to determine if it can be read correctly and to test the read speed How to Use the 6 Prescan function 1 Place the Master CD in the CD ROM drive source 2 Use the down arrow to display the 6 Prescan function 3 Press the OK button to start the Prescan process The SpinWise system will scan the Master CD and the LCD panel will display the scanning information and the results If the master CD can be read correctly then the message OK appears in the LCD Panel If the Master CD cannot be read correctly then the message Fail
43. to the target CD the LCD Panel displays the message Burn Complete OK Press the ESC button and view the system prompt Continue edit next Disc No Use the down arrow button to display Yes and then press the OK button or if No then press the OK button to end the Edit Track option 31 Chapter 6 Editing Tracks TELEX SpinWise CD Duplicator Playing an Audio Track The 10 03 Edit Track Play Audio Track option is used to listen to any track on the Master CD You will need headphones which plug into the front of the disc drawer The volume control is next to the headphone jack How to Use the 10 03 Edit Track Play Audio Track option 1 Place the Master CD in the CD ROM drive 2 Use the down arrow button to scroll to the 10 Edit Track function The press the OK button to select it Use the down arrow to display the option 10 03 Edit Track Play Audio Track Press the OK button The LCD Panel displays the contents of the Master CD and prompts you to select a track 3 Use the down arrow button to select the track number and then press the OK button to select it 4 Attach headphones to the disc drive to listen to the track 5 Press the ESC button three times to stop the Play Audio Track option Closing a Session The 10 04 Edit Track Close Session option is used to finalize the target CD so that no more data can be written to it This option makes the CD ready to be read on a normal player How to Use the 10 04
44. urce partition Burn Mode This option controls the writing methods to the CD including the Disc At Once DAO or Track at Once TAO The default setting is Disc At Once Some CD writers may support different writing methods If the method selected is not supported the duplicator will automatically switch to the other one Button Sound This option controls whether the button sound is ON or OFF The default setting is ON Device Info This option shows what drives are installed System Info This option shows the system information of the LCD such as the internal firmware revisions Quick Erase This option initiates a quick erase of the data on the CD RW disc Full Erase This option will do a complete erase of the data on the CD RW disc This will take a minute to complete 34 TELEX SpinWise CD Duplicator Appendix A Overview of the SpinWise Functions Appendix A Overview of the SpinWise Functions Upon starting the SpinWise system you can press the down arrow button to scroll through the available options The last three options Image Edit Track and Setup have sub options as listed in the outline below 1 Copy 2 Test 3 Test and Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Select Source 9 Image 9 1 Load 9 2 Delete Image 9 3 Image Info 9 4 Compare Image 9 5 Select Partition 9 6 Select Src Drive 10 Edit Track 10 1 CD to CD Edit 10 2 CD to HD 10 3 Play Audio Track
45. will test the source and the target destination If using the CD ROM as the source put a source CD into the CD ROM top disc drawer blank CDs into the writers If using a partition on the hard disk ensure the correct hard disk partition is displayed If you use rewritable discs that contain data the old data will be quickly erased before simulation 3 Press OK to start the simulation test The LCD Panel will display the testing information and when the test ends the LCD will show the results Testing and Copying CDs The 3 Test amp Copy function is used to test the copying process and then actually copy the source to the destination discs How to Use the 3 Test amp Copy function 1 Use the down arrow button to scroll down to the 3 Test amp Copy function 2 The system will test the source and the target destination and then automatically start the copy process If using the CD ROM as the source put a source CD into the CD ROM top disc drawer and blank CDs into the writers If using a partition on the hard disk ensure the correct hard disk partition is displayed in the LCD Panel along with the Test and Copy function If you use rewritable discs that contain data the old data will be quickly erased before testing and copying 3 Press OK to start the test and copy process The LCD Panel will display the testing information the copy information and the results It will automatically eject the duplicated CDs when the process is
Download Pdf Manuals
Related Search