Home
        Dear Customer, - IAG Appliances
         Contents
1.   Remove lamp cover using Step 2  Place coverin safe place Step 3  Grip the halogen bulb and  a small screwdriver  there are 4 asit is made from glass pull from holder  points to assist in easy removal       Step 4  Remove lamp and discard Step 5  Using a tissue or gloves to Step 6  Re fit lamp covercarefully   ina safe and propermanner  protect bulb  fit new halogen bulb  Ensure it issecurely positioned    Oil from the skin can affect  halogen bulbs      10     IRIGWE3 and IRI9QWE3 Installation and Operation Manual    MAINTENANCE and CLEANING    WARNING  ALWAYS un plug the rangehood PRIOR to any maintenance orcleaning being  camed out  to avoid possible electnc shock     Cleaning of Grease Alter  We recommend cleaning of the grease filterto be done at least every 4 weeks  Cleaning of  the greas filter ensures continued performance of the rangehood     Remove the grease filterand soak in wam to hot water containing liquid detergent  Soak for  atleast 5 minutesto break down the grease build up  Without applying too much pressure  use a soft brush to remove stubbom grease residue  Rinse under clean water  Ensure that the  filter is completely dry before re fitting to rangehood     The grease filter can be cleaned in the dishwasheron a nomalwash program ata  temperature around 60 Degrees Celsius  NOTE  Some dis colouration of the grease filter may  occurwhen cleaned in the dishwasher     Cleaning of the Rangehood   Ascooking can create a great deal of grease  we recommend that t
2.  shock this Integrated Canopy Rangehood should  be unplugged before any maintenance orcleaning iscamed out     e ThisiIntegrated Canopy Rangehood cannot be installed in an extemal  environment     e the Grease Filters should be cleaned at least once a month to avoid the nsk  of fire     e Flambe cooking cannot be camed out under the Integrated Canopy  Rangehood and is not recommended for use over Barbeques     e Ducting must be independent from any otherfom of ducting of other  household heating sources     e Ducting into wall cavities is prohibited unless the cavity has been designed for  this purpose    e Litgasbumershould neverremain uncovered oron when there isno pan  present due to the nsk of fire     e Adequate ventilation of the room is required when the cooker hood is used  atthe same time asSappliances buming gasor other fuels     IRIGWE3 and IRI9QWE3 Installation and Operation Manual    DIMENSIONS    Dimensions of IRIBWE3 and IRISWE3    360       IRIGWE3 and IRI9QWE3 Installation and Operation Manual    INSTALLATION    The IRIGWE3 and IRISWE3 are designed to be installed fully integrated into an overhead  Cupboard as pictured below  The IRIGBWES is suited fora 600mm cupboard and the IRISWE3  suited fora 900mm cupboard        Installation of the IRISWE3 Integrated rangehood in an overhead cupboard    Height Requirement    The minimum installation height requirement above the  highest point of the cooktop to the rangehood filter should  be no lessthan 65cm  Forthe bes
3. Integrated  SERVICE TOLL FREE NUMBER Ran ge hood    1 800 805 300 MODEL  IRI9SWE3   865mm    IRI6BWE3   565mm       SERVICE WEBSITE  www customersupport napl com au    HOME APPLIANCES HOME APPLIANCES  distributors of distributors of  Euromaid IAGE  RC meong Euromaid IAGE ARC meo    HAPL_MC_IRI WE3_Sept 2012             INSTALLATION AND OPERATION MANUA          s n              IRIGWE3 and IRI9QWE3 Installation and Operation Manual    Dear Customer     We thank you for choosing this quality appliance and hope you enjoy many years of  reliable service     Please ensure this manual isread carefully before installation and use  Keep this  manualin a safe and accessible location should future reference be required     Regards    Home Appliances    CONTENTS   Contents 1  Safety Wamings 2  Dimensions 3  Insta lla tio n 4 8  Operation 9  Maintenance and Cleaning 10 11    Service 11    IRIGWE3 and IRI9QWE3 Installation and Operation Manual    SAFETY WARNINGS    e Installation of this Integrated Canopy Rangehood must be camed bya  qualified and competent installer     e The manufacturer disclaims and liability forany damage or injury caused asa  result of not following instruction of installation contained in this instruction  manual     e ThisIntegrated Canopy Rangehood isnot intended for use by young children  or infirm persons without supervison     e Young children should be supervised to ensure they do not play with this  Integrated Canopy Rangehood     e To avoid possible electnc
4. cabinet     IRIGWE3 and IRI9QWE3 Installation and Operation Manual    INSTALLATION   Fitting of Integrated Rangehood    Fit 150mm duct spigot  pictured below  with the four 8mm screws provided overthe  rectangular hole located at the top rear of the integrated rangehood  Fit 150mm flexible  ducting  pictured below   supplied  to the ducting spigot  Using one of the nylon ties   supplied  secure the ducting to the duct spigot     A hole orcutout needsto be made in the centre rearof the removable shelf positioned  above the integrated rangehood forthe ducting to go through        150mm duct spigot 150mm flexible ducting    Mount the Integrated Rangehood onto the two tabson the mounting bracket into the two  matching slots located at the rear of the rangehood   Fig  4     Removable shelf   Cannot be permanently  fixed if the need for  servicing is required        Slots to mount to  tabs of mounting  bracket    Integrated Rangehood       IRIGWE3 and IRI9QWE3 Installation and Operation Manual    INSTALLATION   Ducted or Re circulating    The integrated rangehood can be installed in either ducted orre circulating method  The  integrated rangehood issupplied with a small length of flexible duct  although may not be  sufficient in all installations  The installerneedsto determine the method in which the  rangehood will be installed and may need to supply the appropnate componentsto duct  the rangehood corectly     Ducted installaton   Ducting components will need to be supplied by th
5. d create airnoise  from the rangehood     The shelf above the top of the rangehood needsto removable  should the need for servicing  be required ata laterdate  The shelf needsto be located no lessthan 400mm above the  top of the rangehood asthe metal motor housing supplied needsto be put in place after  the rangehood hasbeen installed  Above the shelf a U shaped boxcan be made to cover  the duct so it cannot be seen when the overhead cupboard isopen   Fig 6     Carbon filters may be required to reduce any fumes or smells being re directed back into  the kitchen environment  Call 1800 805 300 to ordercarbon filters if required     Carbon Filter code   CF160  2 supplied     Mesh Cover  recommended to    keep out insect or 150mm diameter hole in top of cupboard  vermin        a A ss Z m e en o e e e e e  2T m m m ee  A A A HS O OA A A OA O  AT A FF A a A A A O A OA O   A D ES D A S D    U shaped box   to cover l  ducting Ducting   Needsto be  supplied   removable     Removable shelf   Cannot be permanently  fixed if the need for    Shelf support  brackets x 4 servicing is required     Motor housing cover    IRIGWE3 and IRI9QWE3 Installation and Operation Manual    OPERATION  The integrated rangehood isfitted with push button Back lit electronic controls     There is 1 light push button and 3 soeed push buttons  Low  Mid and High to control the air  flow speeds   Fig  7           tQ    rt    AAAH a  I Zz 6  S si z    C         Light Contol  To tum ON the halogen lights  depress t
6. e installer as every installation can be  different  The size of the duct pipe needsto be no lessthan 150mm in diameter  Use of  smaller diameter duct pipe will effect performance and create air noise from the  rangehood     The shelf above the top of the rangehood needsto removable  should the need for servicing  be required ata laterdate  The shelf needsto be located no lessthan 400mm above the  top of the rangehood asthe metal motor housing supplied needsto be put in place after  the rangehood hasbeen installed  Above the shelf a U shaped boxcan be made to cover  the duct so it cannot be seen when the overhead cupboard isopen   Fig 5         150mm Ducting required  and ducted to outside of  the home       U shaped box  to cover  ducting   Needsto be  removable     Removable shelf   Cannot be permanently  fixed if the need for  servicing is required     Shelf support  brackets x 4       Fig  5    Motor housing cover    IRIGWE3 and IRI9QWE3 Installation and Operation Manual    INSTALLATION   Ducted or Re circulating    Re circ ulation installation   150mm flexible duct is provided with the integrated rangehood for re circulatiing installation   This type of installation can be executed to the top of a cupboard orthrough a bulkhead  above the cupboard  In both cassa mesh cover will need to be supplied by the installer to  keep out insectsand vermin  The sze of the duct pipe needsto be no lessthan 150mm in  diameter  Use of smaller diameter duct pipe will effect performance an
7. he Lightelectronic push button once  When ON  the  back lit push button will glow blue  To tum lights OFF  depressthe Lightelectronic push button    again     Speed Control  To tum ON the rangehood  depress either the Low  Mid or High electronic push buttons     When ON  the back lit push button will glow blue to indicate your selection  You may wish to  start on Low pnorto cooking commencing and at any time switch to Mid or High without  having to tum off the Low speed first  You can depress any speed at any time and it will  cancel the previous speed chosen  To tum of OFF the rangehood depressthe indicated    electronic push button again     At the end of cooking it isrecommended to run the rangehood on low forup to 10 minutes  to help remove any residual fumesand smoke produced dunng cooking     IRIGWE3 and IRI9QWE3 Installation and Operation Manual    MAINTENANCE and CLEANING    WARNING    ALWAYS un plug the rangehood PRIOR to any maintenance orcleaning being  Ccamed out  to avoid possible electnc shock     To ensure long lasting performance and efficiency  regular maintenance and cleaning of  your integrated rangehood should be perfomed     Replacing Halogen Bulbs    After many hours of operation halogen bulbs may require replacement  Thiscan be done by  the owner  Please follow the following stepsto conduct this procedure     Halogen bulb type   20W 12V G4    NOTE  Replacement of halogen light bulbs are not covered underthe 2 yearspartsand  labour wa manty        Step 1
8. he rangehood body  and motor housing area be cleaned every 3 months  Ensure that non caustic  abrasive  detergents or harsh chemicals are not used to clean the rangehood asthis could cause  damage     Regulany cleaning the rangehood will ensure you get the best performance of your  appliance  Use hot water  detergent and a soft cloth to cany out the cleaning of your  rangehood  DO NOTexcess water dunng cleaning and keep water away from the motor  and other electronic components     Avoid cleaning immediately after using the rangehood ascomponents and lights could still  be hot  Clean the rangehood when it hasnot been in operation     Carbon Filters  Carbon Filters CANNOTbe washed and re used  Carbon filters  if used  require replacement  every 4to 6 months depending on usage     SERVICE    Should you expenence any problems with your rangehood  please un plug immediately and  assoon aspossible  contact Service on    Toll Free 1800 805 300    Altematively you can booka service callon our website    www customersupport integratedappliancegroup com au     11     
9. t performance  the  maximum height should not exceed 75cm   Fig  1        Fig  1    IRIGWE3 and IRI9QWE3 Installation and Operation Manual    INSTALLATION   Position of Mounting Bracket    The Integrated Rangehood ismounted to the rearof the overhead cupboard  Supplied with  the rangehood isa mounting bracket  Fig  2        Fig  2    Pnorto installation  check the measurement from the screw holes in the mounting bracket to  the base of the rangehood  Achieve this by placing the mounting bracket onto the rear of  the Integrated rangehood and measure from base of rangehood to the mid point of the  centre screw hole on the mounting bracket  This may vary slightly to the dimensions  mentioned in Fig  3  and should be the one you use to ensure the base of the rangehood is  level with the base of the ovemead cupboards     Centre the mounting bracket on the rear panel of the overhead cupboard  Ensure the  mounting bracket islevel and mark the 3 screw holes positions  Drill pilot holes into the rear  panel atthe postions you have marked  Relocate mounting bracket and fasten it with  appropnate screwsto the rear cupboard panel  Before tightening completely check the  level iscorrect   Fig  3     Removable shelt   Cannot be pernanently  Axed  Tne need for  Servicing i required       B       A  f  ie  f  r  i  2  A  A  Z  a  a  2  a  2  2  A  2  2  2     2  2  A  A     a     5  i  Z  2  2  2  2  2  2  2  2  2  2  Z  a  f  a  A    Mounting bracket N    284mm  600mm cabinet  i  454mm 0mm 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Chamberlain 2220-267 1/2 HP User's Manual  koprivnica - Francuska alijansa Zagreb  SolDES - Publitour  iSymphony B1W User's Manual  Untitled - Irradio  L`ÉCONOMIE POLITIQUE DE LA COMMUNICATION  ioSafe Solo  Bedienungsanleitung - Niehoff Sound & Light  HQ Power SPACE 250 ELC      Copyright © All rights reserved. 
   Failed to retrieve file