HG3111M WO3111M HI3171M handleiding notice d`utilisation
Contents
1. B46 INSTALLATION INSTRUCTIONS building in in Induction hob Building in the appliance over an oven or a drawer thickness worktop If the hob is to be installed over an oven the recess needs to be a UU certain size This size is dependent thickness of the worktop building in height of the hob refer to table maximum height of the oven not including the control panel The correct recess size is the maximum size of the oven plus the building in height of the hob minus the thickness of the work top recess size GB4 Saftey of the induction hob 1 sensor continuously monitors the temperature of the hob s components If the temperature gets too high the hob s power is automatically reduced 2 The cooking process stops automatically when you remove the pan from the hob You are nevertheless advised to make it a habit to always switch off the hob or cooking zone after use to avoid switching the appliance on by accident 3 Fach cooking zone has been fitted with a sensor that continuously monitors the temperature of the pan s base to avoid the risk of overheating should a pan boil dry 4 Small objects such as a pan smaller than 12 cm a fork or a spoon are not recognised by the hob as a pan The zones display will flash 0 and the hob will not switch on Cooking time limiter maximum cut out2. Maximum cut out is a safety function incorporated in your hob It activates automatically if you forget to switch off the hob after use Cooking setting The cooking zone automatically switches off after 1 and 2 9 hours 3 4 and 5 5 hours 6 7 and 8 4 hours 9 3 hours 10 2 hours Land B48 APPENDIX disposal of packaging and appliance All appliances This appliance has been constructed from durable materials The packaging of this appliance is recyclable It could have been made from e cardboard polythene foil e CFK free polystyrene PS hard foam e polypropylene tape PP These materials should be disposed of in a responsible manner in accordance with government regulations The identification card contains the picture of a dustbin with a cross through it This means that at the end of its working life the appliance may not be disposed of as household refuse but must be handed in at a special refuse collection centre run by the local authority or must be given to a dealer providing this service Segregated processing of household appliances such as this hob avoids any negative effects on the environment and public health that might otherwise occur This process also enables the recovery of the materials used in the production of this appliance thus realising considerable savings in terms of raw materials and energy To draw attention to the fact that the
3. There is no heat loss and the han dles stay cool during induction cooking vi Always lift pans never shove them over the cooking zone it only takes a minute to get used to Induction cooking is fast At first you will be surprised by the speed of the hob At higher settings especially food and liquids are brought to the boil very rapidly It is best not to leave pans unattended to avoid them boiling over or dry The power level adjusts automatically Induction cooking only uses the part of the zone that is directly underneath the pan If you use a small pan on a large zone the power will adjust automatically to the diameter of the pan This means that there will be less power so that it will take longer for the contents of the pan to come to the boil Minimum pan diameter The diameter of a pan must be 12 cm at least The best results are achieved when using a pan with the same diameter as the cooking zone If a pan is too small the cooking zone will not switch on Attention Grains of sand may cause permanent scratches on the glass plate Therefore always make sure that the base of pan is clean before you put it on the cooking zone Also lift a pan before moving it Do not use the hob as a worktop Always keep a lid on the pan to avoid loss of energy PANS optimum use of the hob Induction hob Ng Induction cooking requires pans of a particular quality Pans that have already been used o
4. hob is switched on Hob wrongly connected Check the electrical connection Fault code FOO F01 F11 Fault code FA Fault code FO F6 Fault code F8 A button has been pressed and held too long or there is an object lying on the button The hob has been wrongly connected or the mains voltage is too low The hob has overheated Remove object Switch on the hob again Check the connection Contact your electricity supplier if the problem per sists Defective generator Contact the service department The hob has been switched off due to overheating Let the hob cool down and use a lower setting Fault code F99 Continuous bleep You have pressed 2 or more buttons simultaneously The hob has been wrongly connected or the mains voltage is too high Press 1 button at a time Have your connection changed GB31 INSTALLATION INSTRUCTIONS general Gas hob This appliance may only be fitted by a Corgi registered installer Attention The data card indicates the type of gas and the country for which the appliance has been designed This is a category 3 appliance Gas connection The gas connection must comply with all national and local regulations We recommend that the hob be connected by means of a fixed pipe Connecting the hob with a specially designed safety hose is also permitted Only pipes that are entirely made of metal may be used behind an oven Attention Safety hos
5. appliance and making connections Place the appliance in the worktop and attach it using the mounting brackets and screws Connect to the gas supply Check the connection for gas leaks using soapy water Connect the appliance to the mains B38 INSTALLATION INSTRUCTIONS gas information Gas hob ct G25 25 mbar G20 20 mbar G25 20 mbar G30 29 mbar G31 29 mbar G31 37 mbar G30 50 mbar G31 50 mbar evigo Leien ews gm loo sc t s m 5 00 360 4 40 317 5 00 360 5 50 396 4 75 342 The HG3111M type is the only type fit to be built in This appliance is fitted for the use of natural gas There is a set available to convert this appliance to make it suitable for other types of gas and other gas pressures You may order this conversion set from the sales and service organization The conversion instructions are supplied with the set GB39 INSTALLATION INSTRUCTIONS building in in Induction hob Electrical connection 230 V 50 Hz 2800 W The electrical connection must comply with all national and local regulations Wall mounting socket and plug must be accessible at all times In order to create a permanent connection the power supply lead should be fitted with a multi pole switch with a contact distance of at least 3 mm Attention This appliance must always be earthed In order to avoid dangerous situations a faulty connection may only be replaced by the ma
6. attention to you should pay attention to Induction hob Induction cooking is very safe The hob has been fitted with various safety devices like a residual heat indicator and maximum cut out Yet as with any appliance there are a number of matters that you should pay attention to Connection and repair This appliance may only be connected by a qualified installer Never open the casing yourself Only a service technician is allowed to do this Always disconnect the appliance from the electronic power supply before you start any repair work We advise you to do so by unplugging the appliance by switching off any fuses or in case of a permanent connection by setting the switch in the power supply lead to zero Do not use the hob in temperatures below 5 C During use This cooking appliance has been designed for household use Only use it for preparing dishes When you use the hob for the first time you will notice a new smell This is normal By ventilating the kitchen this smell will soon disappear Remember that if you use one of the higher settings the heating time will be extremely short Never leave the hob unattended when using a high setting If a programme has been set automatic heating it will automatically power down Ensure that there is adequate ventilation during use Keep natural ventilation openings open GB17 Ensure that pans do not boil dry The hob itself is prot
7. off button or the memory button M When recording a new programme any existing programme will be erased The settings and cooking times selected are stored in memo ry Io activate the recorded programme use the PLAY function to switch on the memory You may record 1 programme for each zone GB23 Memory cooking PLAY RECORD PLAY RECORD M PLAY M B24 Both the left hand and right hand cooking zones have a memory function for recording a cooking programme for each zone When recording a programme the settings you select will be saved automatically A programme may last a maximum of 4 hours Memory cooking enables you to record and play a cooking programme for each cooking zone Recording a programme Fill a pan and put it on the cooking zone Press and hold the memory button M until the indicator record starts flashing Switch the cooking zone to the power setting required The indicator record burns continuously After a few seconds the display will alternately show the selected setting and rE The cooking times and settings are saved automatically during the cooking process The button lets you adjust the power setting At the end of the cooking process press the on off button or the memory button tot stop the cooking process and recording the programme Running the programme Fill a pan and put it on the approp
8. segragated processing of electric household appliances is compulsory this appliance carries the symbol of GB49 a crossed out dustbin plak hier het toestel identificatieplaatje placez ici la plaque d identification de I appareil kleben Sie hier das Geritetypenschild ein stick the appliance identification card here Dit plaatje bevindt zich aan de bovenzijde van het toestel Cette plaque se trouve sur le dessus de l appareil Dieses Schild befindet sich an der Oberseite des Ger tes This card is located on the top of the appliance plak hier het ombouw identificatieplaatje indien van toepassing placez ici la plaque d identification relative la conversion en cas d application kleben Sie hier das Umbautypenschild ein wenn zutreffend stick the conversion identification card here where applicable Dit plaatje bevindt zich in de ombouwset indien van toepassing Cette plaque se trouve dans le jeu de conversion en cas d application Dieses Schild befindet sich im Umbausatz wenn zutreffend This card 15 supplied with the conversion kit where applicable Houd wanneer u contact opneemt met de serviceafdeling de productiecode PCODE en het volledige itemnummer ITEMNR bij de hand En cas de contact avec le service apres vente ayez de vous le code de production CODEP et le num ro complet de l article ARTICLENO Halten Sie den Produktionscode PCODE und die vollstindige Itemnummer ITEMNR bereit
9. setting burner indication high setting low setting Wok burner 0 setting burner indication high setting low setting low setting outer ring wok Controls Press the control knob and turn it anticlockwise The burner ignites When using an appliance that has been fitted with a flame failure device you need to press and hold the knob for a few seconds in order to activate the flame failure device GB7 GB8 COMFORTABLE COOKING optimum use of the hob Gas hob Ensure that the flames always remain underneath the pan Flames playing around the pan will lead to loss of energy Also the handles may get too hot to handle Always use pans with a base diameter of 12 cm or more Smaller pans are not stable WRONG RIGHT It is best to use the rapid burner or the wok burner when frying stir frying boiling large quantities and deep frying Use the low setting of the semi rapid burner or the wok burner for cooking sauces simmering and boiling The high setting will make the burner large enough for boiling Always keep the lid on the pan while cooking This will reduce the use of energy by up to 50 Use pans with flat clean and dry bases Flat based pans are stabler and a clean base will transfer the heat more effectively to the food COMFORTABLE COOKING optimum use of the hob Gas hob Wok burner WO3111M The wok burner enables you to prepare dishes at extremely high temperatures When using the wok bur
10. used important information vi 0 GB3 YOUR GAS description HG3111M Semi rapid burner Rapid burner WO3111M Wok burner GB4 YOUR GAS introduction KOOKKE UR This gas hob has been designed for the true cooking enthusiast The differences in burner capacity mean that you can cook any type of dish The control buttons have an integrated spark iginition which means that you need only one hand to ignite and operate the burners This appliance complies with all requirements set by the Cooking Approval quality mark It combines high efficiency with a minimum of incompletely burned combustion gases This hob offers short heating times and excellent simmering capabilities Both the HG3111M and the WO3111M have been fitted with a flame failure device which ensures that the gas supply is shut off if the flame goes out during cooking This manual describes how to make optimum use of the gas hob Besides information on how to operate the hob you will also find background information that may come in handy when using this appliance Store this manual in a safe place so that any subsequent users may also benefit from it GB5 SAFETY what you should pay attention to you should pay attention to Gas hob Ensure that there is adequate ventilation during use Keep natural ventilation openings open When using your hob for longer periods extra ventilation is necessary For instance open a
11. wenn Sie mit der Kundendienstabteilung Kontakt aufnehmen When contacting the service department have the production code PCODE and complete item number ITEMNR to hand Adressen en telefoonnummers van de serviceorganisatie vindt u op de garantiekaart Les adresses et les num ros de t l phone du service apr s vente se trouvent sur la carte de garantie Adressen und Telefonnummern der Kundendienstorganisation finden Sie auf der Garantiekarte You will find the addresses and phone numbers of the service organisation on the guarantee card art nr 700002117000
12. window or install a mechanical fan Use the hob only for preparing dishes The appliance is not suitable for heating spaces Never flamb underneath an extractor hood The high flames may cause a fire even if the fan is switched off Burner parts get very hot during use and take some time to cool down Do not touch them and avoid contact with non heat resistant materials Never immerse hot burner parts and pan supports in cold water Rapid cooling may damage the enamel There should always be at least a 2 cm distance between the pan to a knob or a non heat resistant wall At shorter distances the high temperatures may cause the knobs the wall to discolour and or distort Always use pan supports and suitable cooking utensils Always place the pan on the pan support Placing a pan directly on the burner head may lead to dangerous situations Aluminium trays or foil are not suitable as cooking utensils They may burn into the burners and pan supports Installing burner parts and pan supports The cooking hob can only function properly when the burner parts have been assembled using guide ridges Ensure that the pan supports lie properly against each other and flat GB6 on the glass plate Only then may the pans be positioned stably OPERATION igniting and adjusting Gas hob Every burner may be adjusted continuously between the full and low positions Semi rapid and rapid burners 0
13. 1 Press the M button briefly The light next to PLAY lights up The lights next to REAR and FRONT will start to flash 2 Switch on a cooking zone The cooking zone swiches on in the setting that has been programmed If there is no cooking programme available the zone will switch off again after a few seconds You switch off the zone by pressing the on off button or the M button If a high setting is selected during a programme playing while another zone has been set to a high setting manually this other zone will switch to a lower setting The program me settings take precedence If the programme lowers the zone setting the other zone does not return to the previous high setting Induction hob Memory function PLAY Programming the memory function record 1 Press the memory button M until the light next to RECORD lights up The lights next to REAR and FRONT will start to flash and the clock display indicates 2 Switch on the cooking zone for which you wish to record a programme 3 Select a setting with the or buttons The setting selected and the cooking time are now being recorded You may record several cooking settings after ano ther max 38 When during a recording setting 38 settings have been recorded the next step recorded will automatically be the end of the recording 4 You finish recording the programme by pressing the on
14. HG3111M WO3111M HI3171M handleiding notice d utilisation Anleitung manual User Manual CS WOW PP PAA GB A sagwan bi gawa aed Cuan NAK E SE Pe GB 16 Installation Instructions BE EE Ee eer eg 32 Induction 40 PREFACE description tion This manual describes how to make optimum use of the hob The manual has been arranged as follows the first part provides information about the two burner gas hob and the wok hob This is followed by information on the induction hob This manual contains information on how to operate the hob which pans are suitable and how the appliance works The manual also includes cooking tables and maintenance tips The safety instructions that apply during installation are found in the Installation Instructions chapter This chapter will first deal with the gas hob followed by the induction hob Store the manual in a safe place so that any subsequent users may also benefit from it The manual also serves as a reference for the service department Therefore please paste the data card in the space provided at the back of the manual Where applicable the data card supplied with a conversion kit should also be pasted here The data cards contain all the information that the service department needs to respond adequately to your questions Happy cooking Pictograms
15. OUR INDUCTION description Cooking zone 018 50 2800W Cooking zone 018 50 2800W childproof lock indicator cooking zone front cooking zone cooking programme playing indicator rear cooking zone cooking programme recording cooking timer display memory button settings display timer button set on off button cooking settings GB15 YOUR INDUCTION introduction How induction works Quick and easy Cooking on an induction hob is quite easy The zones have a wide range and can be adjusted accurately The lowest setting enables you to melt chocolate directly in the pan The highest setting brings food to the boil very rapidly Safe and clean The coil 1 in the hob 2 gene During induction cooking heat is generated directly in the rates a magnetic field 3 Placing base of the pan This is why the glass plate never gets hotter will generate an induction current than the pan base This is not only safer than a gas in the base ceramic hob it is also easier to clean as spills do not burn onto the surface Pans Not all pans are suitable for induction cooking Since this form of cooking uses a magnetic field to generate heat the base of the pan must be ferrous Use only pans that are suited for induction cooking as indicated by the Class Induction quality mark Also see page 26 B16 SAFETY INSTRUCTIONS what you should pay
16. They could heat up very rapidly and cause serious burns B18 Keep magnetizable objects credit cards bank cards diskettes etc away from the appliance We advise anyone wearing a pacemaker to consult their cardiologist before using an induction hob Never use a pressure cleaner or a steam cleaner to clean the hob Switching on 1 Put a pan on the cooking zone 2 Press the on off button A horizontal line appears in the display If you do not select a setting after switching on the zone will switch to standby Setting heat 1 Press the or button The hob immediately goes to setting 6 2 Select a higher or a lower setting by pressing the or buttons again Switching off Press the on off button again The hob switches off The residual heat indicator may indicate that the zone is still hot Residual heat indicator After the hob has been used intensively the relevant zone may take a few minutes to cool down As long as this is the case you will see an H in the display Special settings Setting 11 wok setting This setting is ideal for frying meat or preparing stir fried dishes GB19 Setting b boost The boost setting is intended for brining water to the boil rapidly This setting is too high for heating butter or milk 20 OPERATION Look j l2 Jat f 2nn 1 DOO Timer REAR The appliance contai
17. ected against overheating but the pan will get so hot that it could get damaged The guarantee does not cover any damage resulting from a pan boiling dry SAFETY INSTRUCTIONS what you should pay attention to Induction hob Do not use the cooking area for storing items Keep a few centimetres distance between the hob and the contents of the drawer Do not store anything combustible in the drawer underneath the hob Ensure that the flexes of electrical appliances e g a mixer do not touch the hot cooking zone The zones heat up during use and remain hot for a while after switching off Keep young children away from the hob during and immediately after cooking Fat and oil are combustible when overheated Do not stand too close to the pan Should oil catch fire never try to extinguish the fire with water Immediately put a lid on the pan and switch off the cooking Zone Never flamb underneath the extractor hood The high flames could cause a fire even if the extractor hood has been switched off However strong the ceramic top may be it is not unbreakable For instance dropping a spice jar or a pointed utensil on it could cause it to crack Do not us a hob that contains cracks Switch off the appliance immediately unplug it to avoid electrical shocks and call the service department Do not place any metal objects like baking trays biscuit tins saucepan lids or cutlery on the cooking zone
18. emove the protective foil from the sealing tape and tape the strip in the groove of the aluminium profiles or on the edge of the glass plate Do not tape the sealing strip along the corners Instead cut 4 pieces that fit tightly together in the corners B44 INSTALLATION INSTRUCTIONS building in in Induction hob 5 Turn the hob over and place it in the cut out LJ Mass 6 Attach the hob using the mounting brackets supplied For worktops up to 40 mm in thickness place filler blocks between the brackets and the worktop The screws should be screwed into the threaded holes 7 Connect the appliance to the mains A short bleep will be heard and the displays will light up briefly The hob is now ready for use Directly after switching on the hob the fan will activate briefly The hob will perform a self test This will take a few seconds GB45 INSTALLATION INSTRUCTIONS building in in Induction hob Ventilation Pa The electronics in this appliance need cooling If there is insuffi cient air circulation the hob will switch off after a short while Pr There are ventilation holes in the bottom side of the hob Cool g air needs to be sucked into the hob through these holes The outlet holes are situated on the front and bottom sides of the hob Building in the appliance over an oven a drawer The appliance needs to be sufficiently ventilated
19. es may not be bent and must not come into contact with any moving parts of the kitchen unit The connection tap for the hob must be positioned in such a way that it 15 always easily accessible Before you start using the appliance for the first time check the connections for gas leaks using soapy water B32 INSTALLATION INSTRUCTIONS general Gas hob Electrical connection 230 V 50 Hz 0 6 VA The electrical connection must comply with all national and local regulations Wall mounting socket and plug must be accessible at all times In order to create a permanent connection the power supply lead should be fitted with a multi pole switch with a contact distance of at least 3 mm Attention This appliance must always be earthed In order to avoid any dangerous situations a faulty connection cable may only be replaced by the manufacturer the service organization it belongs to or by equally qualified individuals GB33 INSTALLATION INSTRUCTIONS building in in Gas hob Preparing the hob 1 2 ISO straight 1 2 ISO 228 conical Sealing ring 1 2 ISO straight 1 2 ISO 228 straight only for France Remove the protective foil of the sealing strip A and tape the strip in the groove of the aluminium profiles or on the edge of the glass plate Do not tape the sealing strip along the corner Instead cut 4 pieces that fit tightly together in the co
20. ine brush if the plug is very dirty Put the pan supports down vertically do not shove them over the glass plate Assemble the burner parts using the locating notches Burner base B10 Sparkplug Thermocouple MAINTENANCE general Gas hob Burner cap Burner cap Positioning notch Air ring Burner head Thermocouple Sparkplug GB11 MAINTENANCE general Gas hob General Regular maintenance directly after use prevents spilled food from Kb a creating stubborn stains that are hard to clean Use a mild cleaning agent Start by cleaning the control knobs the burners and the pan supports and finish with the glass plate This prevents the glass plate from getting dirty again during cleaning Stubborn stains on enamel pan supports burner heads Stubborn stains are best removed with a non abrasive cream or a soft sponge Never use scouring powder scouring pads sharp objects or aggressive cleaning agents Stubborn stains on the glass plate Clean the glass plate with a special cleaning agent for ceramic hobs Water stains or limescale are best removed with a non abrasive limescale remover like vinegar Cleaning removable burner parts The removable burner parts including the wok burner are best cleaned with a mild cleaning product and a soft cloth Soak stubb
21. ine only Use the highest setting to bring food or liquid to the boil quickly shrink greens blanch vegetables heat oil and fat fry steaks rare underdone bring a pressure cooker up to pressure make puddings and custards Use a slightly lower setting to sear meats fry flatfish thin fillets of fish fry boiled potatoes cook blended soups and sauces fry omelettes fry steaks medium deep fry foods dependent on temperature and quantity Use a setting slightly above medium to fry boiled potatoes fry thick slices of breaded meat fry thin cuts of meat until cooked pot roast large cuts of meat fry bacon fat fry raw potatoes fry French toast fry breaded fish fry thin slices of breaded meat fry omelettes Use the medium setting to thoroughly cook large quantities defrost hard vegetables such as French beans Use the lower settings to make stock stew fruit stew meats thoroughly cook foods simmer vegetables optimum use of the hob MAINTENANCE cleaning g Induction ob Daily cleaning Stubborn stains Although food spills cannot burn into the glass plate we nevertheless recommend that you clean the hob immediately after use For daily cleaning it is best to use a mild cleaning agent and a damp cloth Dry with kitchen paper or a dry tea towel Stubborn stains can also be removed with a mild cleani
22. n a gas hob no longer suitable for induction cooking For electric and induction cooking only use pans with bases that are at least 2 25 mm thick flat The best pans are those with the Class Induction quality mark Use a magnet to check if your pans are suitable Pans that attract the magnet are suitable for induction cooking Special stainless steel pans Earthenware Class Induction Stainless steel Hard wearing enamelled pans Porcelain Enamelled cast iron pans Copper Plastic o f Aluminium Attention Be careful with thin enamelled steel pans At higher settings the enamel may break off if the pan gets too dry The high power level may easily cause the base of the pan to deform Attention Never use pans with deformed bases A convex or concave base may impair the overheating protection function This may cause the hob to crack and the pan base to melt Any damage resulting from the use of unsuitable pans or pans boiling dry is not covered by the guarantee Pressure cookers GB2 Pressure cookers are ideal for induction cooking The short reaction time of the cooking zone brings the cooker up to pressure very quickly The cooking process stops as soon as you switch off the cooking zone 28 COOKING SETTINGS Induction hob Because the right settings depend on the quantity and the ingredients of the dish and on the pan the table below is intended as a guidel
23. ner it is important that you cut the ingredients into strips slices or small pieces in advance use good quality oil e g olive maize sunflower or peanut oil A small amount is sufficient Do not use butter or margarine The high temperatures will cause it to burn putin the ingredients with the longest cooking times first so that all ingredients will be ready and al dente at the same time Using the wok auxiliary support The auxiliary support supplied with the hob or available as a separate accessory is used to properly stabilize a round based wok Place the auxiliary support on the wok support as shown in the following illustration Using the reduction support The reduction support supplied with the hob or available as a separate accessory enables you to use very small pans GB9 MAINTENANCE general Gas hob This appliance has been manufactured from high grade materials that are easy to clean Do not clean burner parts in the dishwasher The detergent may damage the parts Do not use too much water as this may penetrate into the burner or the ventilation openings Clean the sparkplug with a cloth preferably Be careful when doing this much pressure may alter the distance between the tip of the sparkplug and the burner causing the burner to ignite poorly or not at all The sparkplug only operates properly in a dry environment Remove any dirt from the tip with a f
24. ng agent such as washing up liquid Remove water stains and limescale with vinegar Metal marks caused by sliding pans are often difficult to remove Special cleaning products are available for this purpose Food spills are best removed with a glass scraper Also use a glass scraper for removing melted plastic and sugar Not suitable Never use abrasives They leave scratches in which dirt and lime can accumulate Never use anything sharp like steel wool or scourers Activate the childproof lock before you start cleaning the hob ATAG supplies a range of cleaning agents under the name of ATAG Shine You may order these on www hps nl This site also contains several tips on cleaning and operating the appliance FAULTS general Induction hob Check the guarantee card or www hps nl for the service department telephone number Whenever you notice a crack however small in the glass plate switch off the hob immediately unplug the hob turn off the fuse switch es in the meter cabinet or if you have a permanent connection set the switch in the power supply lead to zero Contact the service department Noises in the base of the pan While cooking you may hear a rattling noise coming from the base of the pan This is quite harmless The noise is caused by the effect the high power has on the base of the pan You may reduce the noise by switching to a lower setting B30 FAULTS table Induction hob Text appear
25. ns a clock that can be used as a timer Eer The timer works independently and does not influence the settings of the cooking zones 1 Switch the time by pressing the button once 2 Select the preferred time max 3 59 hours by pressing the and buttons By keeping these buttons depressed longer the time will move forward or backward in larger periods You see the time selected in the display 3 You will hear a bleep after the set time has expired You may turn off this bleep by pressing the button By immediately using the button you can set a new time There is no need to switch off the timer first You can have the timer switch off a cooking zone The timer works for both cooking zones Countdown timer REAR 1 Put a pan on the cooking zone 2 Switch on the cooking zone The appliance starts 3 Switch on the timer with the button Press the button again for the countdown timer function FRONT The light next to FRONT for the front zone or REAR for the rear zone lights up Set the coking time with the and buttons 3 59 hours max You can see the number of minutes set in the display OPERATION Y J J lan hn h Induction hoo Switching on By pressing the button several times you go through the following list A cooking zone that has not been switched on cannot be selected for switching off by timer Consequently this cooking
26. nufacturer the service organization it belongs to or by equally qualified individuals Built in dimensions HI3171M B40 HAM INSTALLATION INSTRUCTIONS building in All appliances Fitted unit situation with space min 10 mm Xmm 50mm GB41 INSTALLATION INSTRUCTIONS building in in All appliances Coupling example 1 HI3171M FR3111M TY3011M WO3111M HG3111M Coupling profile B42 Coupling for making certain that appliances are mounted tightly next to each other INSTALLATION INSTRUCTIONS building in in All appliances Coupling example 2 HI3171M HG3111M WO3111M TY3011M FR3111M mum 8 490 Coupling profile GB43 Coupling for making certain that appliances are mounted tightly next to each other INSTALLATION INSTRUCTIONS building in in Induction hob ST 28 s0m 1 Check that the kitchen unit and the cut out meet the dimension and ventilation requirements 2 If necessary treat the sawn ends of synthetic or wooden worktops with sealing varnish to prevent swelling of the worktop by moisture 3 Turn the hob upside down and place it on the worktop 4 R
27. ornly stained parts in hot suds Never use scouring powder pads sharp objects or aggressive cleaning agents Brass wok burner parts A number of parts of the wok burner are made of brass It is normal for the brass to change colour because of the high temperatures that occur when using the wok B12 MAINTENANCE general Gas hob Keradur burner bases The burner bases have a unique Keradur surface coating The special dirt repelling coating contains a ceramic filling which makes cleaning easier and enhances the durability of the burners considerably The burner bases are best cleaned with a mild cleaning product and a soft cloth ATAG Shine Atag supplies a range of cleaning agents under the name of ATAG Shine You may order these www hps nl This site also contains several tips on cleaning and operating the appliance GB13 FAULTS Gas hob If the appliance does not work properly it does not automatically mean that it is defective Always check for the following situations It smells of gas near the appliance A burner has been turned on but Close the tap and wait a few minu not ignited tes before re igniting The coupling of a bottled gas Tighten the coupling appliance has become undone A burner does not ignite Plug not in socket Push the plug into the socket Fuse defective fuse in Fit a new fuse or switch the auto meter cabinet switched off matic fuse back on S
28. parkplug dirty damp Clean and dry the sparkplug Burner parts incorrectly installed Assemble the burner parts using the centering ridges Burner parts dirty or damp Clean and dry the burner parts Ensure that the outflow holes are open Main gas tap closed Open the main gas tap Problem with the gas grid Check with your gas supplier Gas bottle or tank empty Connect a new gas bottle or have the tank refilled Wrong type of gas used when Check if the gas used is suitable for using bottled gas the appliance Control knob not pressed and held Press and hold the control knob long or deep enough long and deep enough between the high and low settings The burner does not burn evenly Burner parts incorrectly installed Assemble the burner parts using the centering ridges Burner parts dirty or damp Clean and dry the burner parts Ensure that the outflow holes are open Wrong type of gas used when Check if the gas used is suitable for using bottled gas the appliance The burner goes out after igniting Control knob not pressed and held Press and hold the control knob long enough appliances with for at least 5 seconds flame failure device Contact the service department in case of faults B14 Consult the guarantee card that came with the hob or visit www hps nl This appliance may only be connected by a qualified installer Y
29. riate cooking zone Press and hold the memory button M until the indicator play starts flashing Switch on the cooking zone with the on off button The indicator play burns continuously After a few seconds the display will alternately show the selected setting and PL The programme automatically follows the stored cooking times and settings Press the on off button to stop the programme OPERATION setting Induction hob Switching off the bleep Every time you press a button you hear a bleep To switch off this bleep 1 Switch the front cooking zone on and off again 2 Within 3 seconds press the buttons simultaneously for both zones A sound will confirm the change To switch on the bleep again repeat the procedure Synchrocontrol Your hob has a synchrocontrol feature If you have an ATAG WS411S extractor hood installed over the hob it will automatically switch on and off with the hob Using front and rear zones simultaneously Two cooking zones in a row are controlled by one generator The generator divides the power over the two zones Up to setting 6 this has no consequences From setting 7 onwards the other cooking zone is automatically limited You will be notified of this by the ticking sound coming from the appliance Is you wish to switch one of the zones to a higher setting you must first switch the other one to a lower setting 26 USE Induction hob
30. rners B34 INSTALLATION INSTRUCTIONS building in in Gas hob Cutting an opening in the worktop Cut the opening in the worktop This should be done very accurately consult the built in dimensions In case of a wooden worktop coat the sawn surfaces of the worktop with sealing varnish to prevent swelling of the worktop by moisture Attachment points for mounting brackets screw worktop E t Threaded hole Thin worktops GB35 INSTALLATION INSTRUCTIONS building in in Gas hob Built in dimensions HG3111M 1 attachment point mounting bracket Gas connection Front B36 E G1 2 INSTALLATION INSTRUCTIONS building in in Gas hob Built in dimensions WO3111M Gas connection 1 e ee AN J A G1 2 INSTALLATION INSTRUCTIONS building in in Gas hob Free space required around the appliance A gas hob generates heat Therefore leave sufficient space between the appliance and non heat resistant materials Also be careful with materials that may discolour e g stainless steel number of modulos x 330 mm in 650 mm min 100 mm lt KANNAN iii The hob may only be built in next to one vertical wall Attention The bottom side of the hob becomes hot Therefore do not put anything combustible in a drawer that has been fitted directly underneath the hob Installing the
31. s in the display when the hob is first activated This is the standard set up routine Normal operation The fan continues to run for a few minutes after the hob has been switched off The hob is cooling down Normal operation A slight smell is noticeable the first few times the hob is used The new hob is heating up This is normal and will disappear after you have used the hob a few times Ventilate your kitchen There is a soft ticking noise coming from the hob This is caused by the division of the power between the front and rear zones A soft rattling noise may also occur at lower settings Normal operation The pans produce noise during coo king After you have switched on the hob the display keeps flashing This is caused by the energy flowing from the hob to the pan The pan used is not suitable for induc tion cooking or its base diameter is less than 12 cm At high settings this is normal for cer tain pans It will not damage the pans or the hob Use a good pan see page 26 A cooking zone suddenly stops wor king and you hear a bleep The preset time has ended Switch off the bleep using the or buttons on the timer The hob does not work and nothing appears in the display No power supply due to defective cable or wrong connection Check the fuse or the electric switch if there is no plug One of the fuses blows as soon as the
32. zone will be skipped in the above table number of times pressed reaction 0 Clock is off displays are dark 1 Clock as timer 2 Clock switches off front zone after the time set if the zone has been switched on 3 Clock switches off rear zone after the time set if the zone has been switched on 4 Clock is off displays are dark Etcetera If both cooking zones have been switched on you may choose between the front and rear zone by pressing the button again You will hear a bleep to indicate that the cooking time has finished The zone will switch off You switch off the bleep at the end of the cooking time by pressing the timer button If you do not switch off the bleep it will stop automatically after about 30 minutes Childproof lock The childproof lock enables you to lock the hob after it has been switched off This prevents the unintentional swit ching on during maintenance or by children Switching on and off Lay your finger on the button for 3 seconds The childproof GB21 lock is switched on when the light over the button lights up You cannot switch on the childproof lock during cooking You can still use the timer with the hob locked B22 Induction hob Memory function PLAY M The hob has a memory function This function lets you programme settings and corresponding cooking times for each cooking zone Switching on the memory function play
Download Pdf Manuals
Related Search