Home
        MP 130 - Kimo Canada
         Contents
1. AUTOZERO    During a measurement    e     Disconnect the pressure tubes    gt      Press on    OK        AutoZ    displays on screen and the device performs an autozero   At the end of the autozero  the device returns to the measurement display     FREEZE THE MEASUREMENT    During a measurement     gt  Press on    Hold min max    to freeze the measurement       Hold    displays on screen and the measurements are frozen    gt      Press on    On Off Esc    to exit the hold function    The device returns to the measurements display     DISPLAY THE MINIMUM AND THE MAXIMUM    Once the measurement is frozen      gt      Press on    Hold min max      The device displays the maximum value of pressure measured since the last questioning at the top of the screen and the minimum  value of pressure since the last questioning at the bottom of the screen     gt      Press on    On Off Esc    to return to the measurement display     REGLER LAPPAREIL    e Device drop down menu    SEL     BEEP      gt     OFF    SEL   1x  Sect      UNIT 2X  Steet           mbar       Select the measuring unit  The device is on and displays the measurement    gt      Press on    Select         UNIT    blinks on screen    gt      Press on    OK     The unit currently used blinks on screen    gt      Press on    Select    until the desired unit appears   mbar  mmHG  daPa  kPa and inWG    gt      Press on    OK    to validate the unit selection      UNIT    blinks on screen    gt      Press on    On Off Esc    t
2. KIMO    INSTRUMENTS Pressure   Temperature   Humidity   Air velocity   Airflow   Sound level       Im permeability special manometer for gas  network    MP 130    DESCRIPTION OF THE DEVICE    OK key    On Off Esc key          Backlight key    Hold min max key          Select key       Male plug     M     Tap with 2 valves  and 3 channels          Ema       Forat plug    Female connector    Rubber pump    Male connector    PRIOR OPERATIONS FOR THE MP 180 USAGE WITH ITS SEAL KIT     gt     Connect the most adapted conical adaptor to the tube cross section  to the male connector of the seal kit  and the female  connector to the positive input of the manometer  as described below       gt     Isolate the installation   Close the counter tap and block the connectors provide at the installation     o        l      ja       lol            Checkpoint  Filter and limiter    for the new  installations   in renovation  or existing    Gas meter       Conical adaptor    Connect the adaptation cone to the connector downstream of the gas meter   Turn on the device by pressing on    On Off Esc       The device displays its name    MP 130    then performs an autozero    Inject air or gas to test the installation to the correct pressure      During the air supply  put pressure on the system with the little rubber pump provides with the kit   once the desired pressure is  reached  close the taps     During the usage of fuel or inert gas  close the taps and put pressure on system     PERFORM AN 
3. o return to the measurement display     SEL   UNIT    mbar kPa    SEL  1x  Steet      UNIT       00  UNIT      Seran   SEL   mbar       Adjust the auto shut off  The device is on and displays the measurement    gt  Press on    Select    until    AUTO OFF    blinks on screen    gt      Press on    OK     The time before device auto shut off blinks on screen    gt  Press on    Select    to select the time before device auto shut off   15  30  45  60  75  90  105  120 or OFF    gt  Press on    OK    to validate      AUTO OFF    blinks on screen    gt      Press on    On Off Esc    to return to the measurement display         2x  Sect      AUTO      on      AUTO      Select      gt  AUTO  OFF OFF    OFF 15   30mn          Activate or deactivate the keys beep  The device is on and displays the measurement    gt      Press on    Select    until    BEEP    blinks on screen    gt  Press on    OK         OFF    or    ON    blinks on screen    gt      Press on    Select    to activate the keys beep    ON    or deactivate it    OFF       gt  Press on    OK    to validate      BEEP    blinks on screen    gt      Press on    On Off Esc    to return to the measurement display     SEL   BEEP BEEP BEEP  OFF OFF    OFF   ON       ACTIVATE THE BACKLIGHT    The device is on and displays the measurement    gt  Press on    Backlight       Regi to activate the backlight    gt  To deactivate it press again on    Backlight        CHANGE THE BATTERIES     gt      Remove the front part at the back of 
4. the device    gt      Change the old batteries by AAA LRO3 1 5V batteries    gt      Replace the front     f d Once returned to KIMO  required waste collection will be assured in the respect of the environment in accordance to 2002 96 CE guidelines relating to WEEE                    EXPORT DEPARTMENT   Boulevard de Beaubourg   Emerainville   BP 48  77312 MARNE LA VALLEE CEDEX 2  Tel     33 1 60 06 69 25   Fax     33 1 60 06 69 29    afaQ    NTang   portable MP130     10 06 14      RCS  24  P  rigueux 349 282 095 Non contractual document     We reserve the right to modify the characteristics of our products without prior notice     
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
取扱説明書 (1.05 MB/PDF)  Philips Halogen lustre bulb 871829121981100  SMC100 シリーズ(SMC101A)取扱説明書    Product Name DAVE 3 Release Version v3.1.8 Type Of    Samsung Встраиваемый духовой шкаф Samsung BQ3N3T013 Инструкция по использованию  Makita GD0600 Use and Care Manual  Ceram Bond Ceram Bond Ceram Bond  ぷれすごうさんまる 2013.3.1 ぷれすごうさんまる 2013.3.1    Copyright © All rights reserved. 
   Failed to retrieve file