CHG 3512 Manual - Williams Sound
Contents
1. 1 Check that the power supply is plugged into the AC outlet 2 Check that the Alkaline NiMH battery switch in the battery compartment of the receiver transmitter is set to NIMH 8 Be sure the receiver transmitter is facing forward in the charger see figure 1 CHG 3512 Multiple Battery Charger Specifications CHG 3512 charger only Size 9 5 L x 7 4 W x 1 7 H 24 1 cm Lx 18 8 cm W x 4 3 cm H Weight 1 2 lbs 54 kg excluding power supply Color Black ABS Power Supply Input 90 240 VAC input Power Supply Charging Rate TFP 037 Switching AC adapter 5 VDC 4A output 16 Hour Charge 140 mA Pulse Maintain 140 mA Charging Time 16 hours nominal Unit Capacity 12 Units Indicators Individual Charging Indicators Red LEDs LEDs blink slowly when charging is complete Warranty 1 year cables and power supply warranted for 90 days Approvals CE WEEE RoHS CHG 3512 PRO with case Size 18 L x 14 W x 6 75 H 45 7 cm L x 35 5 cm W x 17 1 cm H Weight 10 Ibs 4 53 kg Charging specifications are based on Williams Sound rechargeable NiMH battery BAT 026 2 New batteries have various charge conditions therefore some batteries may take more or less time to fully charge Charging batteries generates heat The receivers transmitters charger and power supply will feel warm when charg ing Do not charge batteries in a closed enclosure such as a car2. 0300 Valley View Rd e Eden Prairie MN 55344 800 328 6190 952 943 2252 FAX 952 943 2174 www williamssound com 2013 Williams Sound All Rights Reserved MAN 116K YP WILLIAMS SOUND CHG 3512 CHG 3512 PRO Multiole Unit Battery Charger MANUAL AND USER GUIDE CHG 3512 Charger CHG 3512 PRO Charger in case Receiver Models PPA R37 PPA R35 8 WIR RX22 4 R863 Transmitter Models T36 T46 and T863 MAN 116K Multiple Unit Battery Charger CHG 3512 Multiple Battery Charger Figure 1 RECEIVER OR CHG 3512 TRANSMITTER REAR VIEW DC POWER INDICATOR WARNING DO NOT ATTEMPT TO CHARGE NON RECHARGEABLE BATTERIES Non rechargeable batteries such as alkaline and carbon zinc may heat up and burst causing possible injury and damage to the equipment Before inserting the RECEIVER OR TRANSMITTER into the charger be sure each unit has rechargeable NiMH batteries installed Check that the Alkaline NiMH battery switch in the battery compartment of the receiver transmitter is set to NiMH Figure 2 MODEL CHG 3512 PRO DO NOT CLOSE THE CASE WHILE THE RECEIVER OR TRANSMITTER UNITS ARE CHARGING THE CASE MUST REMAIN OPEN TO ENSURE PROPER VENTILATION WHILE CHARGING Figure 2 Alkaline 21 a NiMH ht CY Gain AUX Comp CHLock ALKALINE NiMH SWITCH Instructions 1 Plug the TFP 037 power supply into the AC wall outlet Plug the power connector into the rear of the
3. CHG 3512 unit figure 1 The CHG 3512 will power on and run a self test for 20 seconds stepping through each bay lighting each LED indicator 2 Insert the receiver or transmitter into the charging slot as illustrated in figure 1 above The unit s must be placed in the charger facing forward to make contact with charger contacts A red LED indicator will illuminate when charging has started figure 1 The red LED will blink slowly when the batteries are fully charged indicates the charger is in maintain charge mode f the red LED indicator blinks at a fast rate 4 times per second the batteries in that bay are very low or a bad cell is present The CHG 3512 will attempt to condition the batteries to bring them up to a safe charging level If successful the LED indicator will change from a fast blinking LED to a steady on and the normal 16 hour charge time will begin If unsuccessful and the charging LED indicator light continues to fast blink after 3 hours one or both batteries in that bay are bad and need to be replaced e You may charge up to 12 receiver units per CHG 3512 charger e t will take approximately 16 hours to fully charge the batteries Note It is safe to leave the receiver transmitter units in the charger even after the batteries are fully charged The charger will switch to pulse maintain mode to maintain full battery potential 2 Multiple Unit Battery Charger Troubleshooting If no LED s light up
4. FICATIONS WILL VOID THE WARRANTY The exclusions and limitations set out above are not intended to and should not be construed so as to contravene mandatory provisions of applicable law If any part or term of this Disclaimer of Warranty is held to be illegal unenforceable or in conflict with applicable law by a court of competent jurisdiction the validity of the remaining portions of this Disclaimer of Warranty shall not be affected and all rights and obligations shall be construed and enforced as if this Limited Warranty did not contain the particular part or term held to be invalid Your warranty becomes effective the date you purchase your system Your returned warranty card is our way of knowing when your warranty begins Please take a moment to fill it out and mail the enclosed card You may also register your product online http www williamssound com Warranty registration This information will help us serve you better in the future Thank you If you experience difficulty with your system call Toll Free for Customer Assistance 1 800 843 3544 U S A or 1 952 943 2252 Outside the U S A If it is necessary to return the system for service your Customer Service Representative will give you a Return Authorization Number RA and shipping instructions Pack the system carefully and send it to Williams Sound Attn Repair Dept 10300 Valley View Road Eden Prairie MN 55344 YP WILLIAMS SOUND 1
5. Multiple Unit Battery Charger Limited Warranty Williams Sound products are engineered designed and manufactured under carefully controlled conditions to provide you with many years of reliable service Williams Sound warrants the CHG 3512 Multiple Battery Charger against defects in materials and workmanship for ONE 1 year During the first year from the purchase date we will promptly repair or replace the CHG 3512 Charger Microphones earphones headphones rechargeable batteries cables carry cases and most other accessory products carry a 90 day warranty WILLIAMS SOUND HAS NO CONTROL OVER THE CONDITIONS UNDER WHICH THIS PRODUCT IS USED WILLIAMS SOUND THEREFORE DISCLAIMS ALL WARRANTIES NOT SET FORTH ABOVE BOTH EXPRESS AND IMPLIED WITH RESPECT TO THE CHG 3512 MULTIPLE BATTERY CHARGER INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WILLIAMS SOUND SHALL NOT BE LIABLE TO ANY PERSON OR ENTITY FOR ANY MEDICAL EXPENSES OR ANY DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY ANY USE DEFECT FAILURE OR MALFUNCTION OF THE PRODUCT WHETHER A CLAIM FOR SUCH DAMAGES IS BASED UPON WARRANTY CONTRACT TORT OR OTHERWISE THE SOLE REMEDY FOR ANY DEFECT FAILURE OR MALFUNCTION OF THE PRODUCT IS REPLACEMENT OF THE PRODUCT NO PERSON HAS ANY AUTHORITY TO BIND WILLIAMS SOUND TO ANY REPRESENTATION OR WARRANTY WITH RESPECT TO THE CHG 3512 MULTIPLE BATTERY CHARGER UNAUTHORIZED REPAIRS OR MODI
6. ry case or brief case To ensure full battery charging turn off the receiver transmitter units when recharging the batteries Specifications subject to change without notice Recycling Instructions Help Williams Sound protect the environment Please take the time to dispose of your equipment properly ad X Product Recycling for Customers in the European Union Please do NOT dispose of your Williams Sound equipment in the household trash Please take the equipment to an electronics recycling center OR return the product to the factory for proper disposal Battery Recycling for Customers in the European Union Please do NOT dispose of used batteries in the household trash Please take the batteries to a retail or community collection point for recycling
Download Pdf Manuals
Related Search