IGEL Universal Desktop Converter 2
Contents
1. 1 Insert the smartcard with the licenses into the UDC stick 2 Connect the UDC stick to the device on which the UMS Console runs 3 Click on System Manage Licenses in the UMS Console The Manage Licenses window opens License management x IGEL Licenses Ordernumber Hardware type macaddress Hardware Export MAC list Show unlicensed thinclients Create license fram smart card Figure 21 Managing licenses 4 Click on Issue License from the Smartcard and confirm your action A list of available licenses is available under License Information The available target devices are listed under Thin Clients 5 Select the devices for which you require a license 6 Click on Issue Licenses The licenses will be generated by the UDC stick 25 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device 7 Start the devices twice in order to enable the licenses and the associated functions The product ID indicates whether the licensing has worked A license is saved at the following three locations e On the target device e Inthe UMS e On the UDC stick If you would like to delete the license for whatever reason you must delete it in all three locations 26 IGEL Technology GmbH IGEL Universal Desktop Converter 2 5 Upgrading from UD OS to UD OS 2 When updating from your previous Universal Desktop firmware to UD OS 2 version 5 x you may need to perform the update procedu2. 21 IGEL Technology GmbH IGEL Universal Desktop Converter 2 4 Licensing overview The Universal Desktop OS 2 needs its own licenses The licenses for the previous IGEL Universal Desktop OS are not valid for the new firmware Conversely the new licenses are not valid for the old firmware The licenses are linked to the MAC address of the target system and cannot be transferred to another system The new licenses can be found on the smartcard for the UDC stick If you have downloaded the firmware from the Internet or distributed it via the UDC2Stick exe file the licenses for your target computers must be ordered from IGEL Technology More information is available here page 23 However the previous licenses will not lose their validity This means that you can install the previous version of the current firmware at any time and continue working with the previous licenses You have the following options for installing and licensing the Universal Desktop OS 2 firmware on your target devices A Directly on the target device via UDC stick Directly on Directly on the target device via UDC stick target device via UDC stick Via smartcard in the UDC stick Directly on the target device via USB stick with Distributing a license from the UCD2Stick exe Smartcard or ready to use licenses f IGEL Technol ia the UM a Distributing via deployment appliance comm NE Vale y Distributing via RIS deployment If you reinstall the UDC firmw
3. IGEL Universal Desktop Converter 2 UNIVERSAL DESKTOP CONVERTER 2 Contents 1 General Information ee 4 2 Installing firmware and LICENSES cccccccesseceessseeeecsseeeeesseeeeecseteseessetesseeeeesessueeseeeetesessaeeesessateseessatessseaetesss 5 2 1 PEPTIDE een S 5 22 SEIN a ee ee ee ed 6 23 Emergency procedure ISO Mage Auen east ea a erden 9 3 DEDO MO eee ee ee 10 3 Duplicating UDC SHIEK nn iwc eeu a enrera nee E EAE a een 10 3 2 Deployment APP INCE ee ee EEE 12 3 3 Deployment with Microsoft RIS cccccccccsssccecesseccceesececceecceeeesececeesecesseeeceeseesecessuecetsugeceeeenes 19 4 EIGEN SING OV A seta eae EE Ama Hate are ea Ten Er RER en TEE E er nee 22 4 1 Licensing with the Universal Management Suite UMS ccccccccesssececceeeeeeceeeeeeeeeceeeeeeeeeeeeeas 23 4 2 Licensing via smartcard and UMS ee 25 5 Upgrading from UD OS to UD OS 2 0 cece cccccccsecsssseesesseeseseeeeceseeecsseeeesseeeseeueaseeaeeseaeasessueeeseatesseatesessnesensees 27 6 Licensing at the thin client via SMAMTCAIC cccceessecceeesssseeeeeesssseeeeesesseeeesesesaeeeeecsesseeeeeesesseeeeeessaatteeeeseaas 28 8 lt ee ee 29 2 IGEL Technology GmbH IGEL Universal Desktop Converter 2 IGEL Universal Desktop Converter 2 This document describes the procedure for installing and using the IGEL Universal Desktop Converter 2 UCD2 based on Version 5 06 110 This manual is d
4. 28 8 MB Voice over IP Ekiga 4 2 MB VirtualBridges VERDE 6 9 MB 9 2X Client 9 2 MB ThinLinc 7 0 MB Red Hat Enterprise Virtualization 1 2 MB Disk size 486 0 MB firmware size 751 8 MB Cancel IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device 7 Click Install Firmware again IGEL Universal Desktop Converter as N ATTENTION The contents of the target drive will be DESTROYED Please backup all your data before you proceed with the installation Target Drive ATA_TS2GSSD25H S_20150205B97815587087 Firmware IGEL Universal Desktop OS 2 5 06 100 Hardware IGEL H830C License Type Universal Desktop Base Available Licenses 30 Progress details ometry from HDIO GETGEO ioctl 5 sectors 63 14079281733 Erasing dev sdal 752 8 MB 2 a rn Mn gt Ri Figure 4 Installation process 8 Shut down the system once the installation is complete 9 Remove the UDC stick and reboot with the target drive IGEL Linux IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device Remember to change back the BIOS boot order IGEL Universal Desktop Converter 7X ATTENTION The contents of the target drive will be DESTROYED Please backup all your data before you proceed with the installation Target Drive VMware_Virtual_disk Firmware IGEL Universal Desktop OS 5 01 110 Hardware Unknown hardware limited driver support
5. the IGEL OVA file with the PXE Server VM the UDC2 software gt You can now roll out firmware to all computers within your network from this administrator computer imin computer Viviiware Workstation um UDC sofhmare UDOS frmmare PXE server y download Servet Figure 7 Deployment Appliance The PXE server also known as the appliance server is configured via a web interface The actual administration the setup and the firmware rollout are carried out by the PXE server itself 12 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Download the Open Virtualization Appliance OVA file from our download server and import it into the virtualization environment We show you the procedure here using the VMware Workstation Version 10 as an example 1 Open the browser on the administrator computer 2 Goto IGEL UDC DEPLOYMENT APPLIANCE under http myigel biz 3 Download the ova file to the administrator computer 4 In the VMware Workstation click on File gt Open in order to open the IGEL UDC Deployment Appliance Version ova file 5 The Import Virtual Machine window opens Import Virtual Machine Store the new Virtual Machine Provide a name and local storage path for the new virtual machine Name for the new virtual machine IGEL UDC Deployment Applian Storage path for the new virtual machine C Wirtual Machines IGEL UDC Deployment Appliar Help Cancel Figure 8 VMware
6. Workstation 10 import wizard Give the name and location of the virtual machine Click on Import to begin the import process Follow the wizard through the import process wo po M p Check the network settings for connectivity Bridged must be set 13 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device 1 Switch on the virtual machine and launch the VMware Console in order to configure the settings IGEL UDC Deployment Appliance Virtual Appliance Webinterface igel igel default Firmware Configure settings i Press 1 2 p for changing password or T for changing deployment type Figure 9 VMware Console These shortkeys can be used to perform the following actions Configure network Set DHCP range Pl Change password for the web interface Apply settings Confirm change in the deployment type 2 Press to configure the virtual appliance 14 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device 3 Give the IP address netmask and gateway IP 1 Configure Virtual Appliance Please enter new IP address XXX XXX XxXxXx xxx gt 192 160 0 10 Netmask KHK KKXK KHN KKK 255 455 255 060 Gateway XMM XXX XXX XXx gt 194 168 0 1 Confirm settings 192 166 060 160 200 200 2900 0 192 166 0 1 Figure 10 Configuring virtual appliance Confirm your settings by pressing Y Press to set up the DHCP rang
7. click Update firmware The update will now proceed automatically For further information see the System settings Update section in the IGEL UDLX user manual See also our Best Practice documents concerning the IGEL Linux firmware update at the IGEL Knowledge Base http edocs igel com Some of our support FAQs also deal with the firmware update procedure 27 IGEL Technology GmbH IGEL Universal Desktop Converter 2 6 Licensing at the thin client via smartcard Prerequisite e The IGEL Universal Desktop Converter OS 2 is already installed at the target device e UDC stick with SIM card is available Generating licenses from smartcard 1 Put the SIM card with the licenses into the UDC stick 2 Connect the UDC stick to the thin client 3 Click Starting menu gt System gt Lizense Upgrade 4 The mask IGEL License Upgrade opens IGEL License Upgrade ES E ra IGEL License Upgrade Current Product No license Upgrade License Universal Desktop Base License Count 21 Apply Cancel Figure 22 License Upgrade 5 Click Apply 6 The window Question opens Question x Upgrade license is successfully assigned to the device The new license will take effect after reboot Do you want to reboot now 7 Remove the USB stick 8 Click Yes to reboot the thin client 28 IGEL Technology GmbH IGEL Universal Desktop Converter 2 R 1 Index Requirements cccceecesccsecseceeceeceseceuee
8. page 22 Back up all license files from USB stick licenses for later use You should back up all license filed before formating the USB stick especially if you use UDC2Stick exe Further information about the system and the IGEL Universal Management Suite can be found in the documentation on the UDC stick or in the IGEL Knowledge Base edocs igel com 2 3 Emergency procedure ISO image If the system does not boot from the UDC stick you can use an emergency procedure in order to install the IGEL Universal Desktop OS 2 You will find the relevant ISO image on the UDC stick gt Use the ISO file to create a CD and then boot the system from the CD The UDC stick with the licenses must also be connected because the ISO image provides only the UDC2 software and no licenses Alternatively after installation you can apply the licenses to the target devices via the IGEL UMS or issue them at the thin client see page 23 The installation process begins see Installing page 6 IGEL Technology GmbH IGEL Universal Desktop Converter 2 3 Deployment There are various ways in which you can install the IGEL Universal Desktop OS 2 on a number of computers Distribute the firmware to all computers with the help of additional USB sticks Roll out the firmware centrally using a deployment appliance Use the Remote Installation Services RIS and the PXE boot mechanism to distribute the software to the target devices via re
9. Click on this message for more details No license is currently available to be deployed to the device to enable the available feature sets If a USB UDC installer token with valid licenses is available a license can Warning be applied by the UMS For evaluation you can request a license for the device at http igel com en products free evaluation units overview free evaluation units form software html Application Launcher E Progress details EJ y IGEL pihi DE plications UNIVERSAL total firmware size 538 7 MB DESKTOP pss En Creating partition table en Product Preparing dev sda a in T r Gee a Product Name IGEL Universal Desktop OS z i Product Id UC3 LX cp License Firmware Version 5 01 110 01 Copyright IGEL Technology GmbH Erasing dev sdal 538 o Website http www igel de Network Local Name IGEL 00199978A238 Interface 1 Realtek Semiconductor Co Ltd s ee RTL8111 8168 PCI Express Gigabit Ethernet co eier IP Address 10 201 1 177 Hardware Address 00 19 99 78 A2 38 Hardware Device Type FUJITSU S450 COLI Madoal AMD Samnran tro Dracacecar ONNKMLI Figure 5 Restarting with target drive Your device will now run with IGEL Universal Desktop OS 2 If you have installed the firmware using the IGEL UDC stick with smartcard in the manner described your device will now be equipped with up to date licenses and can be registered in the IGEL UMS For more information about licenses see
10. L Technology GmbH IGEL Universal Desktop Converter 2
11. Memory Test DDC No DDC Help Language Video Mode Figure 2 UDC boot menu IGEL Technology GmbH IGEL Universal Desktop Converter 2 The following options are available to you in the boot menu Starts the firmware installer image Autostart after 1 minute Shows messages during the boot process Boots from the hard disk Performs a memory test The following function buttons are available to you in the boot menu Open help for the selected option Select language for the current menu Change video mode DDC setting the DDC mode is enabled by default DDC is enabled by default when the Universal Desktop OS 2 boots If necessary you can change this option again via the IGEL Universal Management Suite or in the local setup 2 2 Installing 1 Boot the Universal Desktop Converter in the standard mode or in verbose mode 2 Select a language for the installation and confirm the license information 3 Select a target drive on which you would like to install the Universal Desktop OS internal external HDD flash or USB drive All existing data on the target drive will be deleted during installation IGEL Universal Desktop Converter ms u ATTENTION The contents of the target drive will be DESTROYED Please backup all your data before you proceed with the installation Target Drive ATA_TS2GSSD25H S_20150205B97815587087 Firmware IGEL Universal Desktop OS 2 5 06 100 Hardware IGEL H830C License Type Universal De
12. are via the UDC stick you will merely need to insert the smartcard into the UDC stick During the installation a license file for your hardware will be generated on the UDC stick with the help of a license from the smartcard More information is available here page 6 In all of the cases described above you can distribute the licenses via the IGEL Universal Management Suite 22 IGEL Technology GmbH IGEL Universal Desktop Converter 2 4 1 Licensing with the Universal Management Suite UMS Requirements e The IGEL Universal Desktop OS 2 must already be installed on the target devices e The target devices are registered in the UMS To order licenses from IGEL Technology and distribute them to your target devices via the UMS gt Find out which clients require the new license gt Send the MAC addresses of the relevant clients to IGEL Technology GmbH gt IGEL will provide you with the corresponding licenses prepared in such a way that they can be rolled out automatically via the UMS Proceed as follows 1 Click on System Manage Licenses in the UMS Console The Manage Licenses window opens License management x IGEL Licenses Ordernumber Hardware type macaddress Hardware Export MAC list Show unlicensed thinclients Create license from smart card Figure 18 Managing licenses 23 IGEL Technology GmbH IGEL Universal Desktop Converter 2 2 Click on Export MAC List in order to export MAC addresse
13. e for the server Enter the first IP address last IP address and lease time gt Oo eS Confirm your settings by pressing Y The DHCP server is enabled and is ready to assign an IP address from the address range to target devices 1 Launch the browser and bring up the web frontend of the PXE server via its IP address http IP address of the server The default password is igel After the dial up change the password page 17 15 IGEL Technology GmbH IGEL Universal Desktop Converter 2 2 Uploadthe UDC2Stick version zip file to the PXE server Firmware upload Please select firmware Durchsuchen Upload Hint Firmware preparation after uploading may take some time Hint Please do not upload another firmware during rollout system information Version Please upload firmware Status Invalid Figure 11 Selecting firmware Warning The upload procedure can take a few minutes Wait until the system reports that the process is complete and the firmware was loaded successfully Wait while this is shown Preparation Please be patient Wait until this message appears Version 4 09 100 Status Validated Only now was the upload successful and the firmware prepared for the rollout Bear in mind the effects that the new DHCP PXE server can have on your network and the connected devices Each computer that boots the image can install IGEL Universal Desktop OS 2 All locally saved data will b
14. e lost during the installation Ensure that no other DHCP servers are running within the network otherwise this may result in malfunctions IGEL UDC will now be deployed as the boot image for each computer that boots with the PXE option 16 IGEL Technology GmbH IGEL Universal Desktop Converter 2 After dialing up using the default password igel you should change the password 1 Press P 2 Enter the new password and confirm it Your new password is secret and will not be displayed in the console Webinterface igel Default password has been changed Figure 12 The changed password will not be shown Normally you would distribute the firmware to the individual clients during an attended installation This would mean that you need to target each individual client manually Instead you can enable the unattended installation function gt Press to change the deployment type With an unattended installation the PXE server rolls out the firmware to every client in the same network This is very useful if you would like to convert every computer within the network Please note The unattended installation function starts the installation automatically when the computer with the IGEL UDC image is started Each device that boots with this image will install the IGEL Universal Desktop OS 2 firmware without further notice In the process all existing data stored locally will be deleted In order to avoid
15. estination USB Stick Your target device will be formated using the FAT32 file system and made bootable All relevant files will be copied from the source to the target device 7 Close the program once the process is complete or copy the firmware to another USB stick Copying firmware from the download server 1 Download the current UDC2Stick zip file from the IGEL download server www myigel biz under IGEL_UNIVERSAL_DESKTOP_CONVERTER UDC2_ Stick _V5 2 Unzip all the files and begin the procedure in this case without a UDC stick in order to create a bootable USB stick with IGEL Universal Desktop OS 2 11 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device If you download the firmware from the IGEL server you will receive the UDC2 software but with no licenses These must be ordered separately and distributed to the target devices via the IGEL UMS see page 23 3 2 Deployment Appliance Ideally the Universal Desktop OS 2 firmware should be distributed via the deployment appliance if a large number of target devices are to be converted and transferring the firmware to each one via USB stick would involve too much work gt Define any computer as the administrator computer What is important is that this computer is in the same network as the computers that are to be converted gt Load onto this computer either VMware Workstation VMware Player or Oracle VM VirtualBox
16. igel biz under IGEL_Universal_ Desktop Converter ris_deployment UDC2_V5 gt Download the firmware image os version public zip from the IGEL download server http myigel biz under IGEL_Universal_Desktop_Converter updates UDC2_V5 Unzip the software and firmware on the server gt Unziptheudc version ris zip file to the image directory of your RIS server The new image will be saved in the igel_udc path 19 IGEL Technology GmbH IGEL Universal Desktop Converter 2 gt Unziptheos version public zip file to the firmware directory of the IGEL UDC as shown in the screenshot 4 IGEL_UDC CD D I boot O images a Oi C os gt Se New Volume E Ga Remotelnstall O Admin Boot Images O Mgmt DO 05Chooser OD Setup O English C9 Images _ KO igel_ude gt a 86 O templates boot r Firmware FD wiInpows N Temolates Gc m Figure 15 Firmware directory IP address gt Open the default file in the path igel udc i386 templates boot pxelinux cfg gt Set the IP address of the RIS server in the following line both sections Label Linux and Label Verbose udc url tftp IP address setup english images J igel udc i386 templates firmware os inf Unattended installation This configuration file provides the parameter udc unattended which allows the installation of IGEL Universal Desktop OS 2 to begin automatically during the system boot The default sett
17. ing for the installation process is udc_unattended false i e the installation must be confirmed on the remote device or target device 20 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device If udc unattended true is set the installation will begin automatically as soon as the device with the IGEL UDC image is booted A device that boots with the image will install IGEL Universal Desktop OS 2 without further notice All locally saved data will be deleted gt Restart your RIS IGEL UDC2 is available as a boot image to each device that boots with the PXE option Windows Deployment Services File Action View Help e 9 m B 4 Windows Deployment Services 5 44 Servers D igel zr9kgt2j1F RIS local windows Server 2003 Enterprise x86 RiSetup Automatically installs Windows Serv Install Images H Boot Images Legacy Images 2 Pending Devices Figure 16 Windows deployment services If a target device with the IGEL UDC2 image boots and the unattended installation mode is set the UDC2 installation process will be shown briefly and will then begin automatically Boot IGEL UD Converter Boot IGEL UD Converter verbose Boot from Hard Disk Memory Test Figure 17 IGEL UDC boot mask To license the firmware use the IGEL Universal Management Suite licensing service as described in the chapter Licensing with the Universal Management Suite UMS page 23
18. ivided into the following sections Installing firmware and licenses How to install the firmware and the associated licenses Deployment How to distribute the firmware to various computers Licensing overview How to license the firmware In addition to the content of this manual you can find further instructions on eDocs in following best practice topics e Deployment Appliance e Importing Licenses The following formatting is used in the document Hyperlink Internal or external links Proper names Proper names of products firms etc GUI text Items of text from the user interface Menu gt Path Context menu paths in systems and programs Entry Program code or system entries Keyboard Commands that are entered using the keyboard Note regarding operation Warning Important note which must be observed 3 IGEL Technology GmbH IGEL Universal Desktop Converter 2 1 General Information The IGEL Universal Desktop Converter Software UDC2 allows the migration of existing PC and thin client hardware to a homogeneous IGEL Universal Desktop thin client infrastructure Essentially you have two options for installing the firmware on your devices e locally on the device itself page 5 via a UCD stick purchased from IGEL Technology Or via a USB stick that you set up yourself by downloading the UDC2 stick software e via remote administration page 10 In both cases you will need e the IGEL Universal Desktop Converter
19. mote administration 3 1 Duplicating UDC stick gt Copy the UDC stick with the installer image to a standard USB stick and install the firmware on your target devices with these additional copies gt Distribute the licenses via the IGEL Universal Management Suite page 23 UDC Firmware Licenses Figure 6 Duplicating UDC2 stick 10 IGEL Technology GmbH IGEL Universal Desktop Converter 2 Many functions One device e The UDC2Stick exe duplication tool can be found on the UDC stick under Software amp Documentation Software UDC2Stick e The software runs on the following Windows systems Windows Vista Windows 7 and Windows 2008 Server e The USB target drive must have a capacity of at least 1 GB gt Launch the program as an administrator To duplicate the firmware proceed as follows gt Copy the firmware onto a USB stick from the IGEL UDC stick Or our download server www myigel biz Copying firmware from the UDC stick 1 Connect both USB sticks the IGEL UDC stick and the target USB stick 2 Launch UDC2Stick exe from the following directory Software amp Documentation Software UDC2Stick 3 Select the USB stick as the Destination 4 Enable Format with FAT32 and Make Bootable 5 Select Quick Format if you are using a target drive that is to be formated quickly Optionally you can copy the Software amp Documentation files to your target drive too 6 Click on Duplicate Source to D
20. re twice gt Updating the firmware of your devices to version 4 13 100 or higher gt Upgrading to UD OS 2 From firmware version 4 13 100 you can upgrade directly to UD OS 2 The upgrade from firmware version 4 x to 5 x must be performed manually The automatic Universal Firmware Update does not work in this case Preparation First of all you need to order the new UD OS 2 licenses gt Find out which clients require the new license Send the MAC addresses of the relevant clients to IGEL Technology GmbH For further information see Licensing with the Universal Management Suite page 23 The licenses for the previous IGEL Universal Desktop OS are not valid for the new firmware However they will not lose their validity This means that you can install the previous version of the firmware at any time and continue working with the previous licenses Manual update procedure Perform the following steps twice once in order to update your old system and then once in order to upgrade your system to UD OS 2 1 Goto www myigel biz and download the desired firmware image from the IGEL server 2 Unzip the ZIP file 3 Save all files in the directory provided either on your local FTP HTTP server or on a drive which is accessible from the client e g a USB stick NFS share etc 4 Click System gt Update gt Firmware Update under Configuration in the IGEL setup 5 Configure the necessary settings 6 Save your changes and
21. s to a csv file The following options will help you to filter your clients What do you want to export Export all unlicensed MAC addresses Export all registered MAC addresses Export all MAC addresses from a view Figure 19 Filtering MAC addresses 3 Send the csv file to IGEL Technology GmbH in order to request license files for the selected devices IGEL Technology will send you the new license file for the relevant MAC addresses 4 Click on Add in the Manage Licenses window in order to upload the license file Upload license file x File source Upload local tile ta UMS server Local Tile Upload location URL 3448 14clec 22c44465atbch bo 75 41 66 9c01 10T6ale 441 Select file trom UMS server File location URL File target Classification IGEL License file Cancel Figure 20 Uploading license file 5 Search through your directories for the lic file 6 Click on OK to upload the new file to the UMS server When you restart the target device it will receive the new license from the server 24 IGEL Technology GmbH IGEL Universal Desktop Converter 2 4 2 Licensing via smartcard and UMS Requirements e The IGEL Universal Desktop OS 2 must already be installed on the target devices e The target devices are registered in the UMS e The driver for the smartcard reader is installed it can be found on the UDC stick To generate licenses from the smartcard proceed as follows
22. seceueeees 12 U A Unattended installation cccccesccccssseceeeeeees 21 About this manual een 3 Upgrading from UD OS to UD OS 2 32 Additional Topics ccscccssesscsessssescoussessenessenenes 3 Uploading fir MWware ccccccsssccccsssececeeseceeeeneees 18 C Changing PASSWOMA ccccccsssececeesecceeeseceeeeeeees 20 GO WE NS ees cess ses een coe rinine ee 25 Configuring PXE Server VM ssccccessseeeeeeeeees 16 D DERIOVMERE ee 11 Deployment Appliance cecccccssececeeseeeeeeees 14 Deployment with Microsoft RIS 2200 23 Duplicate een 13 Duplicating UDC Stick 00 ceccccceeseeeeeeseeeeeeees 11 E Emergency procedure ISO image 9 F Formatting and MEAaNINGS ccccsssccesseeeeeseeeeees 3 G General Information cceeccccesececeeseceeeeeseeeees 4 IGEL Universal Desktop Converter 2 3 Importing OVA file cussnssseesseesnesnsnneennennneenn 15 AStA NE nee 6 Installing and licensing us22222002e nee 26 Installing firmware and licenses 0 5 Installing the UD OS eer 22ceessseseessnesseesnennneenn 22 L Licensing at the thin client via smartcard 33 LICENSING OverVieW c scccesccesccsccesccescceuceeeeeaes 27 Licensing via smartcard and UMS 30 Licensing with the Universal Management Suite INS Dee en ee 28 P PCD aN NG ee 5 24 29 IGE
23. sktop Base Available Licenses 30 T Reset initial settings BJ Edit initial settings Install Firmware Cancel Figure 3 Security check IGEL Technology GmbH IGEL Universal Desktop Converter 2 4 Click Edit initial settings to cofigure the settings which will be applied to the thin client at installation time These settings are saved on the UDC stick and will be applied to thin clients in subsequent installations It is also possible to roll out custom files like certificates at installation time To do so copy the files to a location inside the folder wfs_template on the UDC stick just as they should be placed in the folder wfs on the thin client 5 Click Reset initial settings to remove any custom configuration and restore the installation of the factory default values 6 Click on Install Firmware to begin the installation process In case the target drive is not large enough for installation of the whole firmware a dialog window will open The physical disk size and the estimated firmware size are shown Deselect features in the list of optional features until the remaining parts will fit onto the device IGEL Universal Desktop Converter x The firmware does not fit onto the target ti device entirely Deselect unneeded features until the remaining parts will fit onto the device A Citrix XenDesktop Appliance Mode 320 0 KB 2 Ericom PowerTerm WebConnect 192 0 KB 9 Workspace Client 15 6 MB VMware Horizon
24. software e the IGEL Universal Desktop OS 2 firmware e the associated licenses You will receive the complete package when you purchase the UDC stick from IGEL Technology The stick contains the IGEL Universal Desktop Converter UDC2 software the IGEL Universal Desktop OS 2 firmware a smartcard with the licenses ordered this installation manual the IGEL Universal Desktop manual Linux the IGEL Universal Management Suite Windows with documentation In order to use IGEL Universal Desktop OS 2 you will need the appropriate licenses Licenses for the previous version of the IGEL Universal Desktop OS are no longer valid for the current version You will need a new smartcard or new licenses issued by IGEL Technology IGEL Technology GmbH IGEL Universal Desktop Converter 2 2 Installing firmware and licenses In order to install the IGEL Universal Desktop OS 2 firmware you must make a number of preparations 2 1 Preparing 1 Remove the slot cover on the UDC stick and insert the smartcard with the licenses 2 Change the BIOS boot order of your target device so that it boots from USB UDC Token with Firmware SIM Card wn Licenses Figure 1 Preparing the installation 3 Insert the UDC stick into the USB socket on your target device 4 Start the system The target device boots from the UDC stick and the boot menu opens Boot IGEL UD Converter Boot IGEL UD Converter verbose Boot from Hard Disk
25. the loss of unsecured data an additional security check will ask you to confirm that you really do want to change the deployment type Confirm settings Please press y to apply change or any key Figure 13 Changing deployment type 17 IGEL Technology GmbH IGEL Universal Desktop Converter 2 gt Press to confirm the change You have chosen an unattended installation Ensure that the BIOS of your target device is set to network installation Details of further system requirements can be found in the official UDC data sheet available at http www igel com gt Boot your target device with the IGEL UDC image The UDC installation process will begin after a 10 second time out If the procedure is successful IGEL Universal Desktop OS 2 will be installed on your device Now import the licenses page 22 18 IGEL Technology GmbH IGEL Universal Desktop Converter 2 3 0 Deployment with Microsoft RIS In order to manage the installation of the Universal Desktop OS 2 centrally you can also use Microsoft s Remote Installation Services RIS with PXE boot mechanism This allows you to install the software on your target devices via remote access w FIS Server PE boot mechanist UDG sofware UGS Arm mare download server Figure 14 Distribution via RIS deployment Download software and firmware to the server gt Download the UDC boot image udc version ris zip from the IGEL download server http my
Download Pdf Manuals
Related Search