Dancing Water Bluetooth® Stereo Speakers Instruction
Contents
1. Dancing Water Bluetooth Stereo Speakers NAS 3058 THE NEW GENERATION IN TECHNOLOGY Instruction Manual Please read carefully before use and keep for future reference Thank You We know you have many choices when it comes to technology thank you for choosing us here at Naxa Electronics Established in 2001 in Los Angeles Califor nia we are dedicated to delivering products that en tertain and delight We trust that you will be happy with your purchase Please read this manual carefully and save it for refer ence You may also find the latest FAQ documentation and other product material at our website Come visit us on the web at www naxa com and see all that we have to offer In the Box Please take a moment to make sure that you have ev erything in the list below Although we make every ef fort to ensure that each Naxa device is securely packed and sealed we know a lot can happen in between us and you If anything is missing check back with your local retailer to get immediate assistance If they can not help you please contact our Naxa Support team at www naxa com naxa_support e NAS 3058 e USB charging cable e AUX cable Page 2 Naxa Electronics At a Glance 1 Kd 2 Dil 3 DM 4 Status LED 5 POWER Press once to skip to the previous track Press and hold to decrease the volume Press to pause or resume playback Press once to skip to the next track Press and hold t2. Naxa Electronics Warnings and Precautions CAUTION A WARNING SHOCK HAZARD DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE 2 NE PAS OUVRIR CAUTION TO REDUCE THE RISK OF FIRE AND 3 ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK OF THE UNIT REFER SERVICING ONLY TO 4 QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of unin sulated dangerous voltage within the product s enclosure that 6 may be of significant magnitude to constitute risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and ser vicing instructions in the literature accompanying the appliance CAUTION Do not block the ventilation openings or holes e Do not place any naked flames such as lighted candles on the ap paratus When discarding batteries follow all local rules and laws governing the disposal of batteries Consider the environmental impact of your actions e To prevent fire or shock hazard do not expose this appliance to rain 9 or moisture Important Safety Information Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instruction should be retained for future reference Heed Warnings All warnings on the product and in the operat
3. to comply with the lim its for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful in terference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to ra dio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be de termined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures WWW NAXAa com Page 9 Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CAUTION ON MODIFICATIONS Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment Trademark amp Regulatory Statements Bluetooth is a registered trademark of Bluetooth SIG Inc Other trade marks and names are those of their respective owners Page 10 Naxa Electronics Troubleshooti
4. audio Power Rechargeable battery 800 mAh USB charge port DC 5V Battery Life Up to 2 hours Estimated time based on Bluetooth use at 100 volume battery life will vary depending on use conditions Note Product are improved continuously We reserve the right to modify the product and specifications without prior notice Support If you have problems with your device please consult the instructions in this manual Please also visit us on the web at www naxa com to get up to the minute news alerts and documentation for your device For additional assistance please contact Naxa Technical Support NAXA Technical Support 2320 East 49th St Vernon CA 90058 http www naxa com naxa_support Page 12 Naxa Electronics WWW NAXa com Page 13
5. ct to its normal operation e if the product has been dropped or damaged in any way f when the product exhibits a distinct change in performance this indicates a need for service 21 Replacement Parts When replacement parts are required be sure that your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 22 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to ensure that the product is in proper operating condition 23 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 24 Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including ampli fiers that produce heat WARNING This product contains lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling FCC NOTICE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found
6. fire or electric shock The Status LED 4 will light a steady red when the bat tery is charging It takes approximately 2 hours to charge the unit fully when connected to a stan dard USB port Turning the Speakers On amp Off To turn the speakers on press and hold the POWER button 5 until the Status LED 4 flashes blue To turn the speakers off press and hold the POWER button 5 until the Status LED 4 stops fashing blue If the speakers are not paired with a Blue tooth device within 5 minutes they will turn off automatically to conserve power Page 4 Naxa Electronics Pairing a Device with Bluetooth A device must be paired with the speakers before using them together for the first time To place the speakers in Pairing mode 1 2 If the speakers are on turn them off Press and hold the POWER button 5 until the speakers turns on and the Status LED 4 flashes blue The speakers willl remain in Pairing mode for 2 minutes While the speakers are in Pairing mode 1 Make sure Bluetooth is enabled on your device Enable it if it hasn t Use your device to search for nearby Bluetooth connections This function is usually in the Blue tooth settings menu refer to your device s instruc tion manual to learn more The speakers will announce themselves as NAXA NAS 3058 Select them from the list of devices If your device asks for a passcode use 0000 to com
7. g is required be sure the service technician has used a replace ment plug that has the same overload protection as the original plug as specified by the manufacturer 14 Outdoor Antenna Grounding If an outside antenna is connected to 16 the product be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANS NFPA 70 provides in formation with regard to proper grounding of the mast and support ing structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode see figure Beer Antenna lead in wire __ Electric service equipment coe Antenna discharge unit NEC Section 810 20 Ss Grounding conductors NEC Section 810 21 Power service grounding electrode system NEC Art 250 Part H Lightning For added protection for this product unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long pe riods of time This will prevent damage to the product due to lightning or power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power cir cuits or where it can fall into such
8. h as a bookcase or rack unless proper ventilation is provided or the manufacturer in structions have been adhered to Power Sources This product should be operated only from the type of power source indicated on the rating label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions Grounding or Polarization This product may be equipped with a po larized alternating current line plug that has one blade wider than the other This plug will only fit into the power outlet in one direction This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the direction of the plug If the plug should still fail to fit contact an electrician to replace the obsolete outlet Do not defeat the safety purpose of the polarized plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs con venience receptacles and at the point which they exit from the product Protective Attachment Plug The product may be equipped with an attachment plug with overload protection This is a safety feature See the operat ing instructions for replacement or directions to re set the protective device If replacement of the plu
9. ing in structions should be adhered to Follow Instructions All operating and usage instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Attachments Use only attachments recommended by the manufac turer Use of other attachments may be hazardous Water and Moisture Do not use this product near water e g near a bathtub washbowl kitchen sink laundry tub in wet basements or near a swimming pool and the like Accessories Do not place this product on an unstable cart stand tri pod bracket or table Use only with carts stands tripods brackets or tables recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s in structions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ven tilation to ensure reliable operation of the product and to protect it www naxa com Page 7 10 11 12 13 from overheating These openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation suc
10. ng Guide This guide lists common problems and their solutions Please refer to this guide before requesting service If you need further assistance please contact Naxa Technical Support www naxa com naxa_support Symptom Possible Cause There is no The battery is power exhausted The speakers aren t on The device The speakers are is unable to not in pairing connect tothe mode speaker Bluetooth may be disabled on your device Symptom Possible Cause The deviceis The AUX connector connected but may be in use there is no sound Your device may be beyond the effec tive range ofthe speakers Possible Solution Connect the unitto a USB power source to charge it Your device may not be in playback Press and hold the mode POWER button 5 until the Status LED 4 lights up Turn the speakers off then press and hold the POWER button 5 until the Status LED 4 flashes blue Make sure Bluetooth is enabled on your device Turn it on if it isn t Possible Solution Disconnect all cables from the AUX input connector 7 on the back of the speaker Move closer to the speakers Range may be affected adversely by environmental conditions Ensure that your device is operating correctly Start playback on your device WWW NAXAa com Page 11 Specifications Speakers 40 mm full range drivers Frequency 100 18 000 Hz Response Input Bluetooth version 2 1 EDR 3 5mm AUX
11. o increase the volume Lights up to indicate which mode the speak ers are in Press and hold to turn the speakers on or off While the speakers are off press and hold to turn them on and enter Pairing mode USB charge port AUX connector Speaker Control 1 Speaker Control 2 Connect to a USB power source with the included cable AUX mode 3 5mm stereo connection for devices with 3 5mm line out or headphone output Connect to the Speaker Control 2 connector 9 on the other speaker Connect to the Speaker Control 1 connector 8 on the other speaker WWW NAXAa com Page 3 Connecting Power Your speakers have an integrated rechargeable bat tery Upon initial use the battery should be charged fully to ensure optimal performance and battery life Use the included USB cable to connect the speakers to a USB power source to charge the battery e Connect the small end of the cable to the USB charge port 6 of the unit e Connect the large end of the cable to a high power USB port of a computer The computer should be powered on The battery used in this device may pres ent a fire or chemical burn if mistreated Do not disassemble incinerate or heat the battery Do not leave the battery in a place subject to direct sunlight or ina car with its windows closed Do not connect the unit to a power source other than that which is indicated here or on the label as this may result in the risk of
12. plete the pairing process If the pairing process fails turn the speak ers off and repeat the process If the speakers are not paired with a device they will exit pairing mode after 2 minutes and return to standby mode For faster trouble free pairing we recom mend keeping the device within 3 feet of the speakers while pairing WWW NAXAa com Page 5 Using the Speakers When the speakers are connected to a Bluetooth de vice you can stream music wirelessly to the speakers from the device If your device supports it you can con trol playback with the buttons on the speaker To do this do this Start pause or resume audio Press Pll playback Decrease the volume level Press and hold K4 Increase the volume level Press and hold PP Skip to the previous track Press M4 Skip to the next track Press PPl Turn the speakers off Press and hold POWER Using the AUX Input Connector Connect devices without Bluetooth by using the AUX connection A 3 5mm stereo patch cable is required to make this connection 1 Use the included AUX cable to connect the device s headphone or line out jack to the AUX connector 7 found on the back of the speakers 2 Turn on the device and the speakers Lower the vol ume on both 3 Set the device volume to 80 of its maximum and then start playback 4 Press the button 3 to increase the volume gradually to a comfortable level Page 6
13. power lines or circuits When in Page 8 Naxa Electronics stalling an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 17 Overloading Do not overload wall outlets extension cords or inte gral convenience receptacles as this can result in a risk of fire or elec tric shock 18 Object and Liquid Entry Never push objects of any kind into this prod uct through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 19 Servicing Do not attempt to service this product yourself as open ing or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 20 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the follow ing conditions a when the power supply or plug is damaged b if liquid has been spilled or if objects have fallen into the product c if the product has been exposed to rain or water d if the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the produ
Download Pdf Manuals
Related Search