DABmotion DAB1001 Instructions
Contents
1. To Recall a DAB Memory Preset This function allows you to recall the favorite preset DAB station from the Memory Preset list for the current DAB preset mode 1 Press a PX button where X is from 1 to 4 to select the memory preset 2 If there is no DAB station saved in Memory Preset PX the screen will show PX EMPTY To Set the Auxiliary Input Mode The DAB1001 provides the capability to play audio device such as MP3 or iPod etc through your car radio 1 Press the Rotary Knob then MODE to enter mode function 2 Rotate the Rotary Knob 4 gt until the screen shows AUX 3 Press Rotary Knob and the system will switch to auxiliary input mode and start listening to the audio device The screen will then show DONE Note e You must connect your audio cable between the Aux In jack of DAB1001 and the audio device cable not supplied To Recall the Last Listened DAB Station The DAB1001 automatically remembers the station that is last listened to 1 Press PREVIOUS to recall the station that was last listened to 12 DAB1001 User Guide Menu Settings Press the Rotary Knob then MENU button to enter the menu function Rotate the Rotary Knob 4 gt to select a menu setting then press the Rotary Knob to confirm To Reset FM Transmitting Frequency Setting This function allows you to reset the FM transmitting frequency to the default setting FM 87 6MHz e Press and hold PREVIOUS to return the FM transmitting freq2. DAB1001 User Guide Technical Specifications e Digital Audio Services DAB DAB e RF Frequency Range DAB Band III 174 MHz 240 MHz e RF Sensitivity for DAB Band Ill 98dBm 100dBm FM Transmit Range 87 6 MHz 107 9 MHz e Mains Power 11 V 16V DC e Input Connectors DC power jack 3 5mm stereo audio jack e Presets 4 DAB station presets for each DAB mode and 4 FM transmit presets e Operating Temperature Range 10 C 70 C e Storage Temperature Range 40 C 85 C DAB Antenna Connector Connector Type SMB Output Voltage 12V Information On Waste Disposal This mark on a product and or accompanying documents indicates that when it is to be disposed of it must be treated as Waste Electrical amp Electronic Equipment WEEE Any WEEE marked waste products must not be mixed with general household waste but kept separate for the treatment recovery and recycling of the materials used For proper treatment recovery and recycling please take all WEEE marked waste to your Local Authority Civic waste site where it will be accepted free of charge If all consumers dispose of Waste Electrical amp Electronic Equipment correctly they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment of any hazardous materials that the waste may contain Note about Remote control battery Risk of explosion if battery is replaced by an incorr
3. current FM transmitting frequency it remains the same as before saving the frequency To Recall an FM Transmitting Frequency from the Memory If you wish to change the setting and switch to a previously saved free FM transmitting frequency manually do the following 1 Press SYNC the screen will show the current FM Transmitting Frequency 2 Rotate the Rotary Knob lt or gt to select a preset FX and the screen will show FX Frequency Where Xis from 1 to 4 and the Frequency is the FM frequency saved in memory make a note of that frequency number 3 Press Rotary Knob the DAB1001 will set and transmit FM signal at this new frequency and the screen will show TO Frequency where Frequency is the frequency saved in the preset FX 4 Tune the car radio to the same FM frequency 5 Now you can listen to DAB stations via this new FM Frequency Note While setting a new transmitting frequency operation is in process and TO Frequency is displayed other than the power key any key pressed is ignored by the system DAB1001 User Guide To Perform an Immediate Frequency Change In AFD Mode While listening to a DAB station If you hear static noise or a FM program and before AFD tunes to a clear frequency you can force an immediate frequency change by doing the following 1 Press and hold SYNC the screen will show AF Frequency where Frequency is the new frequency that DAB1001 will set and use to transmit FM signal and force r
4. must be set to ON If you replace the supplied antenna with any third party antenna you must set the antenna power to OFF 1 Inthe menu function rotate the Rotary Knob gt until the screen shows ANTENNA 2 Press the Rotary Knob to enter the antenna power selection operation 3 Then you can rotate the Rotary Knob 4 gt until the screen shows ANT ON to set the antenna power on 4 Or you can rotate the Rotary Knob 4 gt until the screen shows ANT OFF to set the antenna power off 5 Finally press the Rotary Knob to set the antenna power The screen will then show 6 DONE Note The default Antenna Power setting is ON To Reset DAB Presets 1 Inthe menu function rotate the Rotary Knob 4 gt until the screen shows DABRESET 2 Press the Rotary Knob to perform a reset operation for DAB Presets 3 If you do want to reset rotate the Rotary Knob 4 gt to find YES and then press the Rotary Knob for confirmation 4 The screen will show RESETING to indicate that DAB reset is in progress 5 The system will perform a scan of DAB stations automatically after the DAB has reset DAB1001 User Guide Note DAB reset will erase all previous DAB settings including all memory presets for all DAB Presets of the system and all FM transmitting frequency presets It will also clear the station list and perform a full scan for DAB stations To Restore to Factory Settings 1 In the m
5. too often Set AFD_H mode if you frequently hear static noise and the FM frequency is not changed By default DAB1001 is already set to use AFD_H mode Setting AFD 1 2 3 Note 14 In the menu function rotate the Rotary Knob lt 4 gt until the screen shows SYNCMODE Press the Rotary Knob and then rotate the Rotary Knob lt gt until the screen shows AFD_H or AFD L Press the Rotary Knob the AFD function is now enabled and the DAB1001 is operating in the AFD mode The screen will then show DONE If your car radio does not have AF feature the AFD function must not be enabled refer to section on page 15 When your DAB1001 identifies a need to switch FM transmission frequency this will usually force the car radio to change FM frequency automatically and the car radio display will show AF Frequency where Frequency is the new frequency DAB1001 is transmitting If you hear static noise or a FM program and before AFD tunes to a clear frequency you can force an immediate frequency change manually by the following methods 1 Perform an immediate frequency change refer to section on page 18 2 Recall and change FM Transmitting Frequency Saved in Memory refer to section on page 17 3 Change the FM Transmitting Frequency Manually refer to section on page 16 4 Reset the FM transmitting frequency to 87 6MHz refer to section on page 13 While in AFD mode if the FM transmitting frequenc
6. BRADIO 5 DAB1001 will perform a Scan of DAB stations automatically 6 If FM 87 6 MHz is already used by an existing FM station change the initial FM TX frequency as below DAB1001 Operation Press and hold SYNC the DAB1001 will now set a new and clear frequency to transmit the FM signal Car Radio Operation Use auto scan function of your car radio to search for the FM broadcast having program service name DABRADIO Tune on this channel The DAB1001 and car radio are now synchronized 7 Listen to DAB stations using the remote control keys 8 To avoid unnecessary draining of the car battery the DAB1001 will automatically turn off after 4 hours if it is not being used Using the Remote Control The remote control uses advanced RF communication to operate the DAB1001 and further can be used from any position within the vehicle front or rear Please also note that due to the time required to update the vehicle s existing AM FM RDS radio display there is typically a short delay between pressing a remote control button and the vehicle display showing the function This is normal behaviour of the DAB1001 user interface To Turn On or Off DAB1001 The DAB1001 can be turned on or off by the following e Press the Rotary Knob while DAB1001 is off to return it to operating mode e Press and hold the Rotary Knob while DAB1001 is in the operating mode to turn it off To Listen to the DAB Stations There are two options availab
7. DAB1001 Wireless Digital Radio Interface Installation User Guide DAB1001 User Guide Contents Contents a Meine Bee i ae AAA e a ee 2 INIFOGUGLONs stresa 3 Contents of Packages anestesia dati dad eka case 4 e 5 Prod ct OVA does 5 AMAN A A OS 5 General OPS Mesina da 8 DIS E 8 Remote Control Operationerne t 8 Setting p THe DABIOOT ainia ias 10 Using the Remote Control oes oN a dirai A ee ennn 10 Menu SSUES aare ereere ei Ea A 13 Setting the DAB1001 Transmission Frequency ccccccccconnononoccncnnncconannnnnnncnnnnnnnnnnnnnnnnncnnnnnnnnnnnnes 16 FAO iatale ilari ea 19 Technical Specifications sicret iinditan a lei 20 DAB1001 User Guide Introduction The DAB1001 is a wireless interface that offers a flexible and cost effective way to listen to digital radio via your existing in car audio system Your present AM FM system can be easily upgraded to receive DAB DAB digital radio services using an FM RDS micro transmitter and without the addition of complex cabling The DAB1001 DAB receiver is operated using a remote control while all messages related to the system s operations such as service names memory presets etc are converted to RDS text and displayed on the LCD screen of your in car audio system The flexible configuration options of DAB1001 make it easy to install in a range of car makes and models In areas of high FM usage the DAB1001 may need its broadcast frequency changed to avoid interference DAB1001 us
8. NUAL 3 Press the Rotary Knob to confirm the selection the screen will show the current FM Transmitting Frequency Frequency 4 Quick rotation of the Rotary Knob lt gt steps up or down FM frequency by 2MHz Slow rotation of the Rotary Knob lt gt steps up or down FM frequency by 100KHz Choose a frequency until the desired FM frequency is displayed e g 106 7MHz Make a note of that frequency number 5 Press the Rotary Knob the DAB1001 will set and transmit the FM signal at this new frequency and the screen will show TO Frequency 6 Tune the FM preset of your car radio corresponding to the same frequency 7 Now you can listen to DAB stations via this new FM Frequency Note e Itis recommended to set the selected FM frequency as one of the memory presets of your car radio selecting this particular preset FM frequency and together with setting the 16 DAB1001 User Guide DAB1001 s FM transmitting frequency will quickly enable you to start listening to DAB stations e While setting a new transmit frequency operation is in process and TO Frequency is displayed other than the power key any key pressed is ignored by the system To Save an FM Transmitting Frequency in the Memory It is suggested to save a few known free transmitting frequencies up to 4 frequencies in DAB1001 so that you can switch to a new FM transmitting frequency instantly when you drive into an area where the original FM frequenc
9. adio to tune to the same frequency automatically 2 Now you can listen to DAB stations via this new FM Frequency Note e While setting a new transmitting frequency operation is in process and AF Frequency is displayed other than the power key any key pressed is ignored by the system In AutoScan Mode 1 Press and hold SYNC the screen will show TO Frequency where Frequency is the new frequency that DAB1001 will set and use to transmit FM signal 2 Manually change your car radio s FM frequency to match the new DAB1001 s new transmit frequency To Perform a Frequency Change in AutoScan Mode While in the AutoScan mode DAB1001 will automatically search for three unused FM frequencies and save them into the memory in sequence named frequency 1 to 3 These frequencies can be displayed by the following method Operation on the DAB1001 e Press the SYNC button to enter the SYNC function The screen will show the current FM Transmitting Frequency e Pressing SYNC now will cycle through the frequencies 1 to 3 at each stage showing SX Frequency where X is the frequency name 1 to 3 Stay at the preferred frequency e Press the Rotary Knob and the DAB1001 will set and transmit FM signal at this new frequency Operation on Car Radio Tune the car radio to FM frequency 87 6MHz 18 DAB1001 User Guide FAQ Please read this user manual carefully before using the DAB1001 In Car DAB Adapter If you still have diffic
10. cted Press P2 e Recall station preset P2 SCAN Press and Hold e Programs preset P2 when a radio station is selected Press e Recall station preset P3 Press and Hold Programs preset P3 when a radio station is selected Press P4 e Recall station preset P4 MENU Press and Hold e Programs preset P4 when a radio station is selected Press e Display adaptor s current FM transmitting frequency e Select and set the FM transmitting frequency from a manual setting or from one of the four memory presets e In AutoScan mode select and set the FM transmitting frequency from one of the three AutoScan frequencies Press and Hold e Perform an immediate frequency change Press e Recall the last listened DAB station e Revert the screen back to station name display from SCAN SYNC and PREVIOUS MENU settings Press and Hold Press and hold to return the FM transmitting frequency to 87 6 MHz P3 SYNC DAB1001 User Guide sc up the DAB1001 Turn on your in car audio system 5 Enable the AF function on your car radio if it is equipped Consult your car radio manual or the car dealer if your car radio has AF feature This feature is typically enabled as standard 3 Tune the car radio s FM frequency to FM 87 6 MHz which is the same as DAB1001 default FM TX frequency 4 Start DAB1001 by plugging the cigarette lighter power plug into the cigarette lighter the audio system display will show DA
11. ctory reset is in progress e Confirm completion for certain system operation i e set a DONE DAB preset mode RETUNING e Indicate FM transmitting frequency is being returned to a new frequency e Indicate DAB1001 is changing FM transmitting frequency to a TO hegueney new frequency from a manual setting e Indicate DAB1001 is changing FM transmitting frequency to a AF frequency new frequency from the AFD function POW EROFF Display after DAB1001 is turned off into the standby mode Remote Control Operation PREVIOUS DAB1001 User Guide Below is a list of remote control operations and their affect on the DAB1001 Control key General operation Press e Turn on DAB1001 while it is off e Confirm a selection e Display DLS DL station information while listening to a DAB station e Press followed by MODE SCAN or MENU to enter selection e Press and hold to turn off DAB1001 Rotary Rotate 4 gt Knob e Step tune to select a DAB station e Navigate to items sub items while in MENU settings e Navigate to DAB preset modes AUX mode while in MODE settings e Adjust FM transmitting frequency by 100 KHz after SYNC is pressed Accelerate Rotation lt gt e Quick tune to select a DAB station e Adjust FM transmitting frequency by 2MHz after SYNC is pressed Press P1 e Recall station preset P1 MODE Press and Hold e Programs preset P1 when a radio station is sele
12. ect type Dispose of used batteries according to the instructions 20
13. enu function rotate the Rotary Knob gt until the screen shows FACTORY 2 Press the Rotary Knob to perform a factory reset operation 3 Rotate the Rotary Knob 4 gt to find K YES and then press the Rotary Knob for confirmation Otherwise you can press Rotary Knob to revert back to station name 4 The screen will show RESETING to indicate that factory reset is in progress 5 The system will perform a scan of DAB stations automatically after the factory reset is completed You must switch the car radio to FM 87 6MHz to continue DAB listening Note e Factory reset will erase all previous system s settings and set them to default To Display Software Version This function allows you to display the current software version of your DAB1001 1 In the menu function rotate the Rotary Knob lt gt until the screen shows VERSION 2 Press Rotary Knob to display the software version the screen will show the current software version number x x x x Setting the DAB1001 Transmission Frequency If required the FM transmission frequency can be set manually To Display the current FM Transmitting Frequency 1 Press the SYNC and the screen will show Frequency where Frequency is the current FM Transmitting Frequency To Set the FM Transmitting Frequency 1 Press the SYNC and the screen will show the current FM Transmitting Frequency 2 Rotate the Rotary Knob 4 or gt until the screen shows MA
14. es its AFD Automatic Frequency Detection function allowing you to continuously listen to your favourite DAB programs through your car system without the need to change the FM frequency manually Consult your car radio manual to find if your car radio has an AF Alternate Frequency function and how it can be enabled If this AF function is not built in to your car radio the DAB1001 has an Autoscan function that can automatically scan for 3 useable FM frequencies These can be synchronised with the in car system to allow for consistent reception The DAB1001 also provides a 3 5mm jack auxiliary input to allow another music source to play on the in car system This function requires an additional cable Note DAB1001 must operate with an RDS car radio in order to properly display the relevant system message on the in car radio display DAB1001 User Guide Contents of Package MN DAB1001 Power Cable With Accessory Socket Rotary Knob CR2032 Battery Remote Control 7 Dual Lock Tape x1 screw x2 25mm x 35mm 0 Powered DAB Antenna Dual Lock Tapes x2 25mm x 55 mm DAB1001 in Car DAB Adapter User Guide User Guide DAB1001 User Guide Installation Product Overview DAB1001 connections OY Y AERIAL AUXIN AERIAL SMB connector for the DAB antenna AUX In 3 5mm stereo audio jack for an auxiliary cable 12VDC Power socket for connecting to the Cigare
15. gt until the screen shows K FULLSCAN then press the Rotary Knob to begin scanning for DAB stations in the channel range 2 Alternatively you can press the Rotary Knob then the SCAN button to do a FULLSCAN DAB1001 User Guide Note Each time you start DAB1001 if the station list is empty it will perform a Full Scan of DAB stations automatically You may also need to perform a Scan function if you drive your car to a new area where the broadcasting DAB stations are not on the current station list During a scan the screen will show FFF N in which FFF shows the current channel being scanned and N indicates how many stations have been detected While the Scan operation is in process you can press the Rotary Knob at any time to stop the scan If the DAB Station List is not empty before scanning then after completion of a scan the DAB1001 will revert to playing the last DAB station automatically If the DAB Station List is empty before scanning the DAB1001 will tune in the first station of the new DAB Station list If the DAB Station List is empty before scanning and there is no station detected by DAB Scan the screen will show EMPTY To Enable AFD Automatic Frequency Detection There are two AFD modes AFD_H High Sensitive amp AFD_L Low Sensitive While in AFD mode DAB1001 will detect and determine if a frequency change is necessary constantly Set AFD_L mode if you experience the FM frequency is being changed
16. le for you to select and listen to a DAB station Quick Tune and Step Tune Quick Tune allows you to move more quickly through the list of stations to a specific letter of the alphabet corresponding to the initial letter of a station Once you have reached the desired initial character you can then use Step Tune to move to the exact station Quick Tune Fast rotation of the Rotary Knob 4 gt tunes to the first station in the next previous alphabet Repeat the action one character at a time until the screen shows the DAB station with desired initial character 10 DAB1001 User Guide Step Tune Rotate the Rotary Knob 4 gt to step through the stations one by one until the screen shows the desired station station name Note e When the DAB station you have selected is not available the screen will show UNAVAIL There will be no audio output from the DAB1001 e When the signal strength of the DAB station you have selected is too weak the screen will show K POOR SIG Each time you start DAB1001 if the station list is empty it will perform a Full Scan of DAB stations automatically To Display Radio Text DAB1001 is capable of receiving real time Dynamic Label Segment DLS station information such as song titles music type and news or traffic updates or Dynamic Label Plus DL extended information for song track and song artist 1 While listening to a DAB station press the Rotary Knob the station name display wi
17. ll be replaced by the station text 2 If the feature is not enabled the screen will show TEXT OFF After a system time out the screen will revert back to station name To Set a DAB Mode The DAB1001 provides memory positions for up to three sets of DAB Presets The DAB mode positions are DAB1 DAB2 and DAB3 Each DAB Preset position has its own 4 Memory Presets This allows the user to setup three sets of four separate DAB Presets These can be used for different drivers passengers or music choices 1 Press the Rotary Knob then MODE to enter mode function 2 Rotate the Rotary Knob lt or gt to select a particular DAB Preset Mode 3 Press the Rotary Knob the system will set the selected Preset mode The screen will then show DONE Note e When you switch to a different DAB Preset Mode the Memory Preset list of the selected DAB Preset will be loaded into the internal operating system of the DAB1001 automatically The DAB1001 will then perform all functions based on the settings of this DAB Preset Mode e The system default is DAB1 To Save a DAB Memory Preset You can save your favorite stations in the DAB Memory Preset List There are 4 memory presets 1 Rotate the Rotary Knob 4 or gt to select a desired station 2 Press and hold P1 P2 P3 or P4 3 The screen will display a short message of PXSAVED Note e This new setting will overwrite a previous setting in Memory Preset X DAB1001 User Guide
18. overed by the warranty Consult a professional installer if you have any issues or concerns with the installation 5 Minimise coiling loops of excessive power and antenna cable and do not secure them to the DAB1001 Any excess cable that does require looping should be done at least 10cm from the DAB1001 unit X om O Cable attaches to DAB1001 DAB1001 User Guide 6 Connect one end of the power cable into DAB1001 and the accessory plug into car s accessory socket There is a lock mechanism on the plug of Power Cable to DAB1001 Connect the DAB1001 before plugging in the accessory socket see page 10 SY ote AERIAL AUXIN SS Rotate 90 to 2 ensure the plug locks into position 7 The DAB1001 is now ready for use DAB1001 User Guide General Operation Display The DAB1001 unit is operated by using a remote controller the system messages from the remote control operation are converted to RDS text and displayed as an 8 character display on the LCD screen of your in car audio system Below is a list of DAB1001 system messages displayed on the in car audio system Messages Description DABRADIO e Display after DAB1001 is powered on Aa Display the 8 character short service name of the DAB station text info e Display DLS DL station text information if enabled TUNING e Indicate tuning a DAB station is in progress RESETING e Indicate performing a DAB reset or fa
19. tte Lighter Installation Procedure Please read the installation procedure carefully prior to installation Consult a professional installer if you have any issues or concerns with the installation 1 For the best performance locate the DAB1001 under the car s glove compartment If using a different location ensure it is away from metal objects and in an open area 2 DAB1001 should be located with the bottom cover up and all cable and connectors to the rear y To Cigarette Lighter 3 Secure the DAB1001 using the supplied dual lock tapes and screws The following diagram shows the correct positioning of the mounting tape and screws DAB1001 User Guide Secure with TT screw Secure with screw 4 Install the supplied DAB antenna referring to the separate antenna installation guide for instruction The antenna supplied with DAB1001 is a universal DAB Antenna Power will be supplied to the antenna by the DAB1001 interface Therefore do NOT connect the antenna power separately When the antenna is installed please ensure the switch on the antenna is in the ANT position and the antenna power wires are insulated and secured ATTENTION Replacing the supplied antenna with a third party product may result in reduced performance When connecting disconnecting the antenna from DAB1001 please disconnect the DAB1001 form the power first Damage resulting from incorrect installation of the antenna is not c
20. uency to 87 6 MHz e Tune the car radio to FM frequency 87 6MHz manually To Display Station s Signal Strength This function allows you to display the signal quality of the station you are currently listening to 1 Inthe menu function rotate the Rotary Knob lt gt until the screen shows SHOW SIG 2 Press the Rotary Knob to display station s signal quality value the screen will show SIG xx where xx is the signal quality value To Enable DLS DL Display When you enable DLS DL Display the radio will show DLS information such as song titles music types and news or traffic updates from the station if DLS is being received or DL information song track song artist if DL is being received 1 Inthe menu function rotate the Rotary Knob lt gt until the screen shows RADIOTXT 2 Press the Rotary Knob to enter radio text selection operation 3 Then you can rotate the Rotary Knob 4 gt until the screen shows ON to enable the DLS DL display on radio 4 Or you can rotate the Rotary Knob 4 gt until the screen shows OFF to disable the DLS DL display on radio 5 Finally press the Rotary Knob to set the DLS DL display The screen will then show DONE Note The default DLS DL setting is ON To Scan for the DAB Stations This function searches for all DAB stations found adding them to the station list in alphabetical order 1 Inthe menu function rotate the Rotary Knob lt
21. ulties to use this unit this section gives some of the most likely solutions to the problems you might have cannot find any DAB stations Ensure that DAB coverage exists in your area Please visit www worlddab org or www digitalradionow com to check for DAB coverage can find DAB stations but cannot get any sound Make sure that the car radio is not on mute check the volume settings of the car radio forget the FM transmission frequency setting of DAB1001 Press SYNC key the screen will show the current FM Transmitting frequency I cannot hear DAB program when start up my car and turn on the car radio Ensure the DAB1001 is not in the Auxiliary mode While listening to a DAB station lost reception suddenly and hear static noise or a FM program 1 Check if DAB1001 station information shows POOR SIG or UNAVAIL if so you may be leaving the signal coverage area Also the station may be unavailable temporarily as you drive into a tunnel 2 If DAB1001 is in AFD mode the FM transmitting frequency for DAB1001 and the car radio listening Frequency maybe out of sync To reset them do the following e Tune the car radio to FM frequency 87 6MHz e Press and hold PREVIOUS to return the FM transmitting frequency to 87 6 MHz e If DAB1001 is in AutoScan mode the FM channel you selected for DAB mode may be occupied by an existing radio station You need to change the frequency settings of FM Transmitter refer to page 17
22. y for DAB is no longer available 1 Press the Rotary Knob and then press MENU button to enter menu function 2 Rotate the Rotary Knob 4 or gt until the screen shows FMPRESET 3 Press the Rotary Knob to confirm the selection the screen will show F1 4 Press the Rotary Knob to confirm the selection the screen will show Frequency where Frequency is the frequency saved in the preset F1 5 Then you can accelerate rotating the Rotary Knob gt to step up or down FM frequency by 2MHz or just rotate the Rotary Knob 4 gt to step up or down FM frequency by 100KHz to choose a frequency until the desired FM frequency is displayed e g 106 7MHz and then press the Rotary Knob to save The screen will show F1 SAVED and then show F2 6 Repeat step 4 and 5 to select and save memory presets F2 to F4 7 Before executing step 4 you can rotate the Rotary Knob 4 or gt to quickly advance the frequency preset selection to the desired FX where X is from 1 to 4 Note e The default FM frequencies saved in presets F1 to F4 are 87 6MHz 92 5MHz 102 5MHz and 107 9MHz respectively e It is suggested to set those FM frequencies saved in DAB1001 into FM preset of your car radio Selecting the FM preset of your car radio and the matching FM preset of DAB1001 will switch the FM transmission frequency instantly for a clear reception of the DAB station e Saving the frequency in memory does not affect the
23. y for DAB1001 and the car radio listening frequency is out of sync and you wish to reset them do the following 1 Tune the car radio to 87 6MHz 2 Press and hold PREVIOUS to return the FM transmitting frequency to 87 6 MHz DAB1001 User Guide To Enable AutoScan If it is not possible to use the AFD feature you can use AutoScan to automatically search for unused FM frequencies When this function is activated the DAB1001 will keep searching for 3 available FM frequencies automatically You may select one of them as the new transmitting frequency and tune your car radio in this new FM frequency to receive DAB services continuously 1 Inthe menu function rotate the Rotary Knob lt gt until the screen shows SYNCMODE 2 Press the Rotary Knob and then rotate the Rotary Knob lt 4 gt until the screen shows AUTOSCAN 3 Press the Rotary Knob the function of AutoScan is now enabled and the DAB1001 is operating in the AutoScan mode The screen will then show DONE Note e Switching to the AutoScan mode does not change the current FM transmitting frequency as it remains the same as before the switch e While in the AutoScan mode DAB1001 will automatically search for three unused FM frequencies and save them into the memory in sequence from frequency 1 to frequency 3 through the SYNC function refer to section on page 18 To Set Antenna Power For DAB1001 to work with the supplied active antenna the antenna power
Download Pdf Manuals
Related Search