Tulip Siphon Water Filter
Contents
1. Tulip Siphon What this iter removes Water Filter Seen tom eee l Place the upper container with dirty inctruction mantiGl Bacteria water about 7 0 cm above the lower 6 Turbidity container with the clean water Parasites Z Use the red ring to adjust the length Bad taste and residual chlorine of the hose 3 If you have a new filter element let This will prevent diseases like diarrhea the filter stay in water cholera and typhoid during one night and do The filter and its elements not use the first 20 liters about two buckets of filtered water this will not Saa water taste good A 4 Open the tap and press aa n the bulb o Wait until the bulb slowly has been filled and the water starts flowing out of the tap If the filter is new or ary this has to be repeated a few times till the water starts flowing by itself 6 The Tulip Siphon filter will purify the water of bacteria parasites and turbidity o Fitered water 7 It is recommended to catch the a clean water in a container with a tap and lid If not and water is taken out with a cup make sure cap and hands are clean y 2 o Fam Easy tance p water filter mem Safe drink a and yous tem Drai sca __to4 your fami Athan Hose How to make your drinking The speed of filtration is faster when water safe the container with contaminated water stands at a higher level 4 BASIC WATER NEEDS VY www basicwaterneeds com i2. n Maintenance Backwashing When the filter element becomes dirty the water flow will reduce Therefore it is important to frequently wash the filter l The Siphon filter can be backwashed Do this after each bucket that you have filtered Close the tap and firmly press the bulb Water will come out of the filter element make sure you remove the filter from the containers while pressing 2 Put the filter back in the water wait until the bulb is filled again with water and open the tap 3 If necessary repeat this a few times until the flow rate is back to normal 4 Frequent back washing will result in a longer lifetime of the filter na Kollaix yarelalazy Cleaning l When the water is very turbid use the pre filter When the pre filter becomes dirty remove the pre tilter from the ceramic VY Y BASIC WATER NEEDS element and wash it in clean water 2 When the flow remains to slow even after backwashing clean the filter with a toothbrush or a cloth 3 IF backwashing and cleaning does not increase the flow the filter element has to be carefully cleaned with the round scrub pad Remove only as little as possible from the ceramic material as this will shorten the lifetime of the element Rinse with clean water while Scrubbing When to replace the filter When the filter diameter becomes too small because of scrubbing the filter element has to be replaced With the
3. plastic sensor you can measure when your filter has to be replaced When the plastic sensor fits around the thinnest part of the filter the filter is no longer safe to filter the water and it has to be replaced Ask your local supplier for the replacement filter www basicwaterneeds com How to replace the filter l Unscrew the old filter element from the cover 2 Cut the hose near the nozzle with a knife 3 Screw the new filter through the cover and connect it to the hose Key features Fast flow Unique end of life sensor Back wash function 6 Will last for Z000 liters a Koya Miaimelmaatennteya www basicwaterneeds com Designed in the Netherlands manufactured in India
Download Pdf Manuals
Related Search