Code Reader™ 3500 (CR3500)
Contents
1. 4 M170_04 Note Detailed instructions including screen shots on connecting a CR3500 to Enable Suffix Enter USB Enable Carriage Return Line Feed RS232 non Code Bluetooth devices can be found in the CR3500 User Manual available at www codecorp com For more configuration options including disabling the Suffix Enter configuration download the CR3500 User Manual from www codecorp com2. Reading Tips Quick Tips 1 4 Press either trigger button to turn the reader on or to scan a bar code Press the Soft Key under Options to manually enter data view stored data connect to a Bluetooth device send all stored data to a PC and change reader settings Use the arrow buttons to navigate through lists data and more Use the Enter button to select an item Visit www codecorp com to download the CR3500 User Manual for a complete reference guide of CR3500 functions The reader is too far from a bar code more than 12 from the bar code reader The reader is too close to a bar code less than 1 from the bar code reader The optimal distance to read most bar codes is 3 4 away from the bar code reader CR3500 s unique targeting function uses two converging targeting LEDs to guide the user to optimal reading range Display Soft Key Soft Key Trigger Trigger Button Button Enter Button Renew Keys Keypad 2012 Code Corporation All Rights Reserved Quickstart Guide Code Reader 3500 CR3500 Wireless Included with your Wireless CR3500 Depending on the reader configuration ordered you will have received one of the following with your CR3500 Battery Cartridge Battery Handle Installing a Battery Cartridge 1 To install a battery place the plastic tab on the bottom of the battery cartridge into the slot on the reader Slid
3. e the locking mechanism up and press the battery into place Slide the locking mechanism down to secure the battery 2 To detach a battery slide the locking mechanism on the reader up and pull the battery cartridge up and away from the slot on the reader Note Battery ships with approximately 50 battery life Fully charge battery before use Approximate charge time is 4 hours when battery depleted code et c004419_03_CR3500_Quickstart_Wireless Installing a Battery Handle 3 Scan the newly created QuickConnect code and then Wie 1 To attach a Battery Handle insert the tab on the back scan the Save Settings code M188_02 F of the Battery Handle into the reader s recessed slot M188_02 2 Press the reader down towards the handle to snap 4 Next a Serial Application must be opened to transmit data from the CR3500 to the PC Visit www codecorp com downloads php and download install CodeXML Router CortexTools or open a HyperTerminal Once installed select the COM Port of your reader see step 2 to complete the wireless setup into place Optionally the reader can be further secured to the handle with two threaded screws on the underside of the reader and handle screws are included with Battery Handles CR3500 Default Settings 3 To detach a Battery Handle slide the locking mecha nism on the reader up and pull the battery handle up The CR3500 out of the box will read the following bar c
4. odes and away from the slot on the reader Codabar Code 39 Trioptic Int 2 of 5 Codablock F Code 93 PDF417 Powering On a CR3500 2 YYW___L_ _ __ _ Code 11 Code 128 Telepen Code 39 Code 128 Short Margin UPC Code 39 Short Margin Data Matrix UPC Short Margin Trigger Trigger To power on a CR3500 press and hold either Baa Buo UPC E Expansion trigger button for approximately one second To configure a CR3500 to read bar codes not listed please download the CR3500 User Manual from www codecorp com and scan the appropriate Enable bar code reading symbology configuration code CR3500 Wireless Setup To establish a Bluetooth connection via Code s CodeXML M3 Modem please refer to the CodeXML M3 Modem QuickStart Guide available at www codecorp com Suffix Enter Configuration The default setting on the CR3500 has Suffix Enter disabled To enable the Suffix Enter for Establishing a Bluetooth Connection with a non Code Bluetooth Adapter USB and Carriage Return Line Feed for RS232 scan the configuration code followed by the Save Settings M188_02 bar code above 1 Visit http www codecorp com bdaddr php and follow the instructions to create and print a QuickConnect Code that is specific to your adapter 2 Plug the adapter into the USB port on your computer and follow the installation instructions included with your adapter Make note of the COM Port assigned to the adapter e g COM 11 ech M161_0
Download Pdf Manuals
Related Search