PDF user manual (ENG) - ECONO-HEAT
Contents
1. ENERGY SAVING MODE This easy 1 the heater is being used The heat of the panel 7 OFF Standby The eController will keep the heater off while it stays in standby mode o 8 Select the required mode with the LA and LY J buttons 9 Move to the next or previous hour with the C4 and gt button o 10 When the last hour 24 hour is programmed and the gt button is pressed it will advance to the Oh When finished with the programming exit with the button or wait for the 60 second time out o 11 To program more days select the day with the DAY gt button press and hold for 1 second and repeat as above REVIEWING YOUR PROGRAM SETTINGS While P1 P2 and PX mode are selected press the DAY gt button repeatedly to verify the program for each day The day of the week will flash indicating the verify program mode The eController will automatically exit this mode if the gt button is not pressed for five seconds USING THE CHILD LOCK Press and hold both the CY and L gt buttons for 2 seconds to set the child lock function all the buttons are then disabled the a lock symbol will appear on the display Repeat the procedure to unlock the child lock function 1 REPLACING THE BATTERIES CAUTION Batteries may explode if mistreated Do not recharge disassemble or dispose of in fire Replace the batteries when the J empty battery symbol COMFORT The room temperature is regulated to the Comfort te2. controller DIGITALLY INTEGRATED THERMOSTAT amp TIMER Model Nos 101 and 102 Please note that this accessory is only compatible with Econo Heat eHeater model no 0607 only 2 year warranty www econo heat com ROOM HEATER ACCESSORY HOUR MODE CLOCK MN a DAF TEMPE F PRG Prior to operating the ECONO HEAT eController please familiarise yourself with the following safety instructions READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS Read all the instructions and only use the eController for its intended purpose e The heater must be switched OFF before plugging or unplugging it from the wall socket Do not handle the plug with wet hands e Always ensure that the heater is switched OFF before attempting to fit or remove the eController for programming Do not expose the eController to any liquids Keep batteries out of the reach of children Batteries pose a choking and health hazard if swallowed e The eController is not intended for use by young children or infirm persons without supervision Young children must be supervised to ensure that they do not play with the eController e Itis dangerous to alter the specifications or modify eController only use the eController as recommended by ECONO HEAT e Ifthe eController has malfunctioned or been damaged in any manner return the eController to the nearest authorised ECONO HEAT service centre for examination or rep
3. Temperature Set Manual Program eController Integrated Thermostat amp Timer Accessory MODE INDICATOR LIGHTS Please note The indicator lights will only illuminate once the eController is plugged into the heater ED w Comfort mode is active ED C Setback mode is active E Ee Anti frost mode is active ECO mode is active 5 The eController is powered by the mains Please note When active the display screen shows the time of the day The temperature unit C Celcius or F Fahrenheit is only shown on the display screen when setting the Comfort and Setback temperatures When the thermostat switches the heater off temporarily the light of the heater s on off switch will appear off Leave the heater on off switch in the on position during this period THE ORIGINAL LOW COST ENERGY SAVER HEATER
4. LEEP When the eController is not powered by the mains and running only from battery power it will enter a sleep mode after 2 minutes when no button is pressed the display turns off Press the eF button to wake the eController from the sleep mode wis ECONO HEAT Winbis 2 ik NP inl Gh le A lO appears Only use Type CR2032 batteries Do not mix used and new batteries or batteries of different brands Always replace both batteries simultaneously Make sure that the positive and the negative are facing in the correct directions Promptly dispose of used batteries in accordance with local regulations FACTORY RESET Follow these steps to restore the eController to its factory default settings Your personal settings will be removed permanently 1 Turn the heater OFF and remove the eController 2 Remove the batteries for 10 seconds or longer 3 Replace the batteries and the default factory setting will be restored Take care of our environment do not dispose electrical or electronic appliances via household waste Dispose of obsolete or defective electrical appliances via municipal collection points Please help to avoid potential environmental and health impacts through improper waste disposal Contribute to recycling and other forms of utilization of old electric and electronic appliances Your municipality provides with information of collection points for electrical and e electronic waste Set Clock Set
5. X custom programmable mode Comfort x Setback C Anti frost 3 Pilot Wire fist and OFF Press the button to activate the Eco mode and again to exit MANUAL PROGRAMMING Please note While programming if no button is pressed within 60 seconds the eController will automatically exit the current setup mode Alternatively press the button to exit immediately THE ORIGINAL LOW COST ENERGY SAVER HEATER controller DIGITALLY INTEGRATED THERMOSTAT amp TIMER Model Nos 101 and 102 Please note that this accessory is only compatible with Econo Heat eHeater model no 0607 only 2 year warranty www econo heat com SETTING THE COMFORT 3 AND SETBACK TEMPERATURES Please note The heater should heat your room to a maximum of 23 C approximately E 1 Press and hold the TEMP LY button for one second 2 The Comfort Symbol will flash and the comfort temperature set point is displayed default 23 C or 74 F 3 Increase or Decrease the temperature set point 7 30 C 44 86 F by pressing the 4 and LY J buttons 4 Confirm by pressing the gt button 5 The Setback Symbol will flash and the Setback temperature set point is displayed default 19 C or 66 F 6 Increase or Decrease the temperature set point 7 30 C 44 86 F by pressing the La J and LY buttons 7 Confirm by pressing the L gt button 8 The display will advance to Comfort x setpoint Exit with the button SETTING THE AUTO PX MODE 1 Sele
6. air Under no circumstances should the customer attempt to repair eController e The eController should only be repaired by an authorized ECONO HEAT service centre Failure to do so may render the warranty void IMPORTANT The eController must only be connected to an ECONO HEAT wall panel heater whose voltage and frequency comply with the specifications given on the eController rating plate The eController can be used with the following ECONO HEAT wall panel heater type numbers EP44 01 EP44 02 EP44 03 EP44 04 EP44 06 EP44 07 TWO YEAR WARRANTY ECONO HEAT warrants that your eController is free from manufacturing defects subject to the following conditions Such warranty shall be to repair or replace the goods in the event of any manufacturing defect which shall exclude fair wear and tear notified to ECONO HEAT within 2 two years of the original purchase the Warranty Period Any liability on ECONO HEAT hereunder shall be conditional on the goods having been stored and installed properly in accordance with ECONO HEAT Energy Efficient Appliances Pty Limited Address 7 Mercury Crescent Wetton Cape Town South Africa 7780 Phone 27 21 762 6500 Fax 27 21 762 6500 Email info econo heat com Web www econo heat com ECONO HEAT s installation instructions and from the date of delivery Having been used and maintained in accordance with ECONO HEAT s instructions and or labelling
7. ct the PX mode with the MODE L lt button 2 Use the DAY gt button to select the day to program then press and hold for 1 second 3 The first hour of the day will flash The hour setting can now be adjusted 4 Select the mode to be used for that hour of the day 5 Comfort x The eController will regulate the room temperature to the Comfort temperature set point 6 Setback The eController will regulate the room temperature to the Setback temperature set point MODE DESCRIPTIONS AUTO PRESET 1 This mode offers you a fixed weekly preset schedule and cannot be changed Monday to Friday Comfort mode is active from 4am 8am and 4pm 11pm The rest of the time the heater will remain in standby OFF mode Oh 16h 23h Oh 4h amp h oli k oFrF e Oa WEEKEND Saturday and Sunday Comfort mode is active from 6am 11pm The rest of the time the heater will remain in standby OFF mode Oh 6h 23h Oh a O AUTO PRESET 2 This mode offers you a fixed weekly preset schedule and cannot be changed EVERYDAY Monday to Sunday Comfort mode is active everyday from 4am 8am and 4pm 11pm The rest of the time the heater will remain in standby OFF mode Oh 4h amp h 16h 23h Oh Oid k orr e O AUTO PX CUSTOM PROGRAMABLE MODE This is a customisable program mode that allows you to select and manually program the temperature mode Comfort w Setback C or OFF for every hour of the day each day of the week AN fexexey ECO
8. e it vE nun P2 f KE a Li T L a i fs J d DTU Ghd d HAT T tT dsr a ferred 1815 e i508 1830 a ll Ss ok is ore J PX lini i d d onuninnn QUICK INSTALLATION STEPS SEE PICTORIAL DIAGRAM 1 Switch the heater OFF before removing or inserting the cover plate or accessories Remove the cover plate from the heater using a screwdriver to leverage the retainer latch down while pulling it out 2 Once the cover plate is removed the heater will render itself non operational Store the cover plate in a safe place for safekeeping 3 Locate and discard the battery pull tab on the rear side of the eController Your eController is now ready to program while holding it in hand 4 Follow the easy START UP INSTRUCTIONS below Once completed simply slot the eController into your heater ready to use START UP INSTRUCTIONS 1 After powering the eController up for the first time the C symbol will flash Select the temperature unit C Celcius or F Fahrenheit with the LA and LY button 2 Confirm your selection by pressing the gt button CT SETTING THE CLOCK 1 Press and hold the CLOCK LA button for one second 2 The clock symbol will start flashing Set the clock by pressing the HOUR LA J MIN LY and DAY gt buttons respectively 3 Press the button to exit MODE SELECTION Push the MODE L lt button to cycle through the various modes Auto Preset P1 Auto Preset P2 Auto P
9. ees or agents by any third party pursuant to arising in respect of the installation and or use and or supply of the goods This means that if ECONO HEAT is sued by anyone mentioned in paragraph 1 above arising from the installation or use of the product that you as the Purchaser will financially indemnify ECONO HEAT against any losses which ECONO HEAT may suffer as a result of such law suit INTRODUCTION Thank you for purchasing the eController for your ECONO HEAT wall panel heater As a stand alone product the ECONO HEAT wall panel heater has proven itself worldwide as a remarkably low cost energy saver heater Please note that even without the eController fitted the heater still works efficiently and effectively creating a warm summer feel inside your home when it s winter outside while using only 400 watts of electricity However the heater can also be used in conjunction with the eController to control hour by hour on off cycles room temperatures within your home and much much more ROOM SIZES Due to variable factors it is impossible to specify what size panel or how many to install in a room We do however recommend the following e For regions with normal winters 1 x 400 Watt or 2 x 260 Watt per approximately 10 12m of floor area e For regions with very cold winters 1 x 400 Watt or 2 x 260 Watt per approximately 8 10m of floor area gt N wis ECONO HEAT THETRWVARM PHO ee lO l
10. mperature setting continuously This is used when the room is normally occupied for long periods of time Should you wish to change the preset default temperature of 23 C or 74 F see the MANUAL PROGRAMMING section of this user manual SETBACK The room temperature is regulated to the Setback temperature setting continuously This mode is used to conserve energy and is recommended if the room is unoccupied for more than 2 hours Typically Setback will be used in holiday homes to combat high humidity and mold Should you wish to change the preset default temperature of 19 C or 66 F see the MANUAL PROGRAMMING section of this user manual ANTI FROST The room temperature is regulated to a minimum of 7 C or 45 F continuously This is used to frost protect the room when it is not being occupied for 24 hours or longer PILOT WIRE Applicable to heater type no EP44 01 only mainly found in France This mode makes use of an additional wire linked between the heaters and a programmer that activates the various modes Modes supported are Comfort wX Setback C Anti Frost and OFF If the heater is not wired with the pilot wire this mode will revert to Comfort w OFF STANDBY The eController is active in standby mode however no power is supplied to the heater click mode is used to save you even more electricity when is maintained however the power supply is switched ON and OFF intermittently saving further electricity consumption S
11. on the goods No repairs alterations thereon having been carried out by the Buyer or any third party The warranty is in substitution for and excludes all expressed or implied whether by law or otherwise conditions warranties or obligations of any kind relating to fitness for purpose or quality of workmanship material or design save to the extent that any law prevents such exclusion LIMITATION OF LIABILITY Save as expressly provided for in these Conditions of Sale and save as may be stipulated to the contrary in the South African Consumer Protection Act 2008 ECONO HEAT shall not be liable to the Purchaser or their employees servants or agents contractors or successor purchasers for and direct indirect incidental or consequential damages of any nature howsoever caused whether based in delict or contract or otherwise pursuant to or arising in respect of the installation and or use of the goods This means that if any loss damage or harm is caused to anyone due to the use or installation of these goods you may not hold ECONO HEAT liable in law Save as may be stipulated to the contrary in the South African Consumer Protection Act 2008 in respect of any liability of the Seller that has been excluded the Purchaser hereby indemnifies ECONO HEAT Energy Efficient Heating Appliances Pty Ltd its members employees and agents against all actions proceedings and claims whatsoever brought against it its members employ
Download Pdf Manuals
Related Search