ALUMINUM FRAME BATH BENCH
Contents
1. components such as hand grips and push buttons are warranted for a period of one 1 year from the date of purchase This express warranty exends only to the original purchaser This warranty does not extend to damage or failure occuring as a result of owner misusage or negligence normal wear and tear or other causes unrelated to the manufacture and design of the product This express warranty is Medline s sole and exclusive warranty and your sole remedy in the event of default or failure Medline is not responsible for any consequential or incidental damages or cost arising from the use of the warranted products or any defect therein or failure thereof KEEP YOUR RECEIPT Contact us at 1 SOO MEDLINE Monday Friday SAM 5PM CST if you encounter and problems or for information regarding repairs or maintenence Medline disclaims all other warranties including but not limited to the implied warranties or merchantability and fitness for a particular purpose2. ALUMINUM FRAME BATH BENCH MDS89740RW ae Weight Capacity 250 Ibs Height Range 14 20 34 Tool Free Assembly THIS PRODUCT CONTAINS DRY NATURAL RUBBER MEDLINE Revised 6 16 08 ASSEMBLY INSTRUCTIONS 1 Make sure you have all necessary components for assembling your bath bench 1 Seat A 5 Triangular Hand Screws B 2 Aluminum Mainframes imprinted A and B C 4 Aluminum Extension Legs D NOTE Upon receipt of package check ALL parts for shipping damage If shipping damage is noted DO NOT USE Call Medline to report the issue immediately 1 800 MEDLINE FIGURE 1 ey FZ Turn seat over to reveal holes for mainframes See Figure 1 Locate B on bench Match B from bench with mainframe that is labeled with B Place B main frame into indentation of bench Take mainframe A and match it up with A on bench See Figure 2 Secure middle hole with 1 triangular hand screw See Figure 3 HAND TIGHTEN ONLY Place remaining triangular hand screws into respected holes of mainframes to secure to bench See Figures 4 and 5 HAND TIGHTEN ONLY Depress push buttons on main frame and place aluminum extension legs into mainframe tube and repeat with all legs See Figure 6 Make sure push button is fully protruded before using coesprenaenicooe PEE EE e gt for desired height Peach 20 GENERAL WARNINGS AND INSTALLATION INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USING YOUR MEDLINE BATH BEN
3. CH To ensure the safe installation adjustment and operation of Bath Bench these instructions MUST be followed GENERAL WARNINGS DO NOT install this product without first reading and understanding this instruction sheet If you are unable to understand these warnings cautions and instructions contact a healthcare professional or dealer before attempting to install this equipment Failure to follow instructions may result in serious injury e Prior to each use check that all joints and fittings on the bath bench are tight e Check that all pushbuttons are fully protruded through holes and are properly engaged e Make sure all four legs are adjusted evenly and are free of any obstructions prior to use e Check all screws for tightness before EACH use e Do not place bath bench on uneven surfaces e Do not use if wobbly unstable or not level Do not exceed user weight capacity of 250 lbs e Do not twist or turn while seated on bath bench this may cause frame to bend Do not stand on bath bench e Do not use bath bench for any purpose that it is not intended to be used for e Check rubber tips for rips cracks or wear If these conditions exist DO NOT use the tips and replace IMMEDIATELY Rubber Tips can be ordered item MDS87755T MEDLINE LIMITED WARRANTY Your Medline product is warranted to be free of material defects in materials and workmanship for a period of three 3 years from the date of purchase Non durable
Download Pdf Manuals
Related Search