DLUmOTEq`ovar
Contents
1. and darkness Additional Information for users of a DLUMOTEC oval N or DLUMOTEC oval N plus These headlamps too are equipped with an internal duplex cable H to connect to a hub dynamo though without an A integral light dark sensor You are urgently requested to proceed according to the above Important Note The two position switch ON OFF has the following functions Position The switch nose is directed to the symbol on In this position the bicycle lighting system is in operation and shines whilst riding also in daylight Position O The switch nose is directed to the symbol O The bicycle lighting system is electrically disconnected from the hub dynamo and does not shine not even in darkness We hope you will enjoy your DLUMOTEC oval and many years of safe cycling For extra safety we recommend our bicycle rear lights with elec tronic standlight functlon operating on an LED and condenser Ask your specialized trader for DToplight XS plus DToplight plus Toplight plus Seculite plus Seculite cross plus and 4D lite plus THE VISION OF BIKING Busch amp Muller KG Made n Germany 58540 Meinerzhagen Tel 0 23 54 9 15 6 gt Fax 0 23 54 9 15 7 00 IT www bumm de BUSCH M LLER2. version incorporates the standlight function described above When using a permanently operating hub dynamo the complete lighting system is automatically activated in case of poor light conditlons and darkness e g also in a tunnel The headlamp features an interior duplex cable H that must be connected to the hub dynamo black wire current black white wire mass Connect the current cable current wire of the rear light at the lower contact 2 Important Note Use of this duplex cable H Incorporated in the headlamp is a precondition for trouble free operation It must not be removed cut off completely Shortening the cable to the requlred size is acceptable The light dark sensor is incorporated in the headlamp casing F The three position switch G features following functions Position 1 T is visible with switch pushed downwards In thls position the bicycle lighting system is electrically connec ted to the hub dynamo and shines whilst riding also in daylight Position 0 This O position covering half of 1 and S The bicycle lighting system is electrically disconnected from the hub dynamo and does not shine not even in darkness Position S The switch is pushed upwards and the S is visible below the switch The lighting system is now electrically connected to the hub dynamo The headlamp and rear Ilght are automatically activated in case of poor light conditions
3. LU MOTEC oval senso and with electronic standllght function via a condenser no accumulator or battery required i e DLUMOTEC oval plus for bicycles with bottle neck dynamos and DLUMOTEC oval senso plus as well as DLUMOTEC oval N or N plus com plete with a switch to activate a hub dynamo all of which are of course made in Germany Assembly The DLUMOTEC oval headlamps are intended for attachment on your bicycle by means of a bracket A Place the bracket onto the casing base B and affix it with the enclosed screw C and hexagonal nut D Important Once attached to the handlebar bracket align your headlamp in a way to make sure that the track is illuminated at a distance of about 5 to 7 min front of the bike Now tighten the screw and nut with a suitably sized key so as to make Sure that the headlamp cannot change its positlon Cable connection The upper duplex contact 1 is the plug contact for the current cable while the lower 2 is intended for the mass cable The free plug contacts can be used to connect the rear light In any case we recommend to use a duplex cable in order to ensure perfect current and mass contact Bicycles with a hub dynamo are generally equipped with an internal duplex cable Please refer to the notes below for further information SUPRAVISION LED This high performance LED is firmly connected to the reflector and a cooling unit Thanks to its long service Ilfe there i
4. O LUMeSTEc Legend A Headlamp bracket short B Casing base C Hexagonal boit D Hexagonal nut E Lighting unit SUPRAVISION LED CAD reflector front rear reflector ultrasonically sealed enclosed coollng system F Lamp casing G Switch H Duplex cable l Zinc dye cast headlamp bracket especially sulted for cantilever or hydraulic brakes optionally avallable on request S Light dark sensor 1 Double plug contact current 2 Double plug contact mass DLUMOTEC oval Assembly and User Manual General With this dynamo operated LED headiamp you have selected a high quality state of the art bicycle lighting system All versions of the DLUMOTEC oval series bear the German cer tifleatlon mark confirming compllance with the highly sophistl cated requirements of the so called 10 Lux Regulation minimum lighting value The Xenon type brilliant white light is generated by the high performance SUPRAVISION LED The headlamp illu minates the track ahead at a speed of no more than just 3 km h offering a revolutlonarily new lighting technology with its LED service life of up to 100 000 hours comparing to only 100 hours rendered by a Halogen lamp so that it is no longer necessary to change the bulb Apart from the standard version our product range also includes versions with light dark sensor for automatic start up of the entire lighting system for bicycles fed by a hub dynamo D
5. s no need to change the lamp Accordingly and in compliance with German StVZO the headlamp cannot be opened The integral cooling system protects the high performance LED against overheating thus ensuring many years of high lighting efficiency Caution The integral over voltage protection shields the LED in case of rear light failure In any case and for your own safety make sure to remedy the defect as soon as possible Do not ride your bike with a defective lighting system for an extended period of time We do not assume lability for any damage to the headlamp or rear light caused by over voltage as well as for opened head lamps Important information for owners of a DLUMOTEC oval plus You have bought a bicycle headlamp of a particularly high quallty that Incorporates an automatic electronic standlight sets enab led by the high performance LED and generated via a condenser A smail amount of the energy supplied by the dynamo is stored in the condenser whilst riding After approximately 3 minutes at a speed of roughly 20 km h the condenser is fully charged At low speeds and when stationary the condenser supplies the white LED This technology is always ready for operation and maintenance free and does not require batteries or accumula tors Additional information for users of a DLUMOTEC oval senso or DLUMOTEC oval senso plus You own an LED dynamo headlamp featuring the brand new sensor technology The plus
Download Pdf Manuals
Related Search
DLUmOTEq`ovar