Home

DiCare m1C User Manual

1. Electrodes or lead or replace the capture cable are loose or electrodes or lead ECG broken cable signals Malfunction A Call for repair Select wrong Select correct connection method input Sensitivity setting is Adjust display ECG is incorrect sensitivity setting too small Make reliable Connection is loose i or do not connection see the Electrode placement Replace ECG is incorrect or the electrodes and skin is not clean clean the skin No ECG Replace the Bad connection waveform electrodes and or 12 is lead cable displayed Sensitivity setting is Adjust display incorrect sensitivity Wash hands legs ECG i Electrostatic and skin then dry signal interference them before fluctuation i recording Keep away from interferenc Interfered by other other devices or devices compliances 7 Technical specifications ECG Connection Recording Time Recording Mode Bandwidth Finger contact lead I and II chest contact standard ECG electrode connection with electrode cable user selectable Up to 48s no TF card or up to 32 hours with TF card adjustable Limb lead contact record mode chest lead record mode chest lead continuous record mode chest lead dynamic record mode quick ECG recording mode 0 05Hz 150Hz adjustable 13 High Pass Filter Low Pass Filter Sample Rate Input Dynamic Range 0 05Hz 5 0Hz adjustable 40Hz 150H
2. s recommendations listed in the user s manual Repair will be charged in the following situations 1 Damages caused by un authorized installation or recommend environment 2 Damages caused by improper repair or misuse 3 Damages caused by using unmatched power source 4 Damages caused by force majeure 15 Registration Product Name Product Model Order No Date of Shipment Expired Date Warranty Method Mail The following items need be filled to complete the warranty card Product Series No Company Name Address Postcode Contact Person Tel Fax Email Note Refer to the label on the back of product for the S N 16
3. Micro Ambulatory ECG Recorder DiCare m1C Series Users Quick Start Manual amp Warranty Card Dimetek Digital Medical Technologies Ltd Thanks for using Micro Ambulatory ECG Recorder It is important to use the recorder correctly for effective ECG recording and monitoring Please read the manual and follow instructions carefully in order to use this device properly More detailed instructions can be obtained at www dimetek net or through the authorized distributors The device is designed for adult s ECG monitoring ambulatory ECG recording ECG data storage and review Both skin touch pad mode and ECG skin electrode mode are provided for easy flexible and reliable recording The expected usage of this device is for clinic reference Please consult your doctor instead of diagnosing or treating by yourself Be aware that there are several versions of this device which have slight differences in operations and technical specifications 1 Basic structure 6 2 oe X N 2 ae st aS 7 7a 1 Display panel 2 Indicator 3 Navigation key 4 Battery cover 5 Battery compartment 6 TF card slot 7 Touch pad 8 Electrode socket 2 Connection There are two ways to make ECG Lead Positions ST G connection for ECG recordings Using 2 ECG skin electrodes and a set of lead cables allows more reliable and long time ECG recording during activities but requiring skin elect
4. accept the operation and return 8 System Setting Item Icon Instruction 1 EN System language setting EN for English and CN for Chinese 2 Quick Default ECG recording mode when Power is on It can be set as Quick Holter Event or Monitor 3 fil Restore all settings to the factory default settings 4 Battery type could be alkaline or NiHM EA 9 User name Entry Roll navigation key to change letters press to select Maximally 20 letters can be entered Select backspace symbol to remove the last one or select return 10 symbol to confirm the user name and return 5 Insertion and Removal of the SD card figure Push to partially eject the memory card then carefully pull out Put memory card into card reader then insert into computer 8 D Mt gt EE C gt computer i 6 Troubleshooting Note Items with A need to be operated by professional maintenance engineer Problem Possible causes Solutions Install the No batteries batteries Can t turn l Replace the on Batteries run out batteries Malfunction A Call for repair Data can t Memory card is not Reformat memory be stored formatted card using a 11 or computer retrieved Memory card is Replace memory damaged card Malfunction A Call for repair Turn on the The power is off device A Call for repair Can t
5. ate and time on the display Then roll to select a recording and press to review it The elapsed recording time is shown above the waveform Roll to go backward forward Press again to quit Review 4 Menu and selection Press and roll for a selection Young Tsau _ I H Quick Holter en 2011 10 28 I t X 24s DO vV5 e X E 32h D Power amp Time Quick Recording Holter Recording a esa Q H E M Ve e X Bin wo OXs8d Event Recording Monitor Recording Mode setting Name Input 200sPs gt gt gt alll Young Tsaue 0 5 75Hz 24s 60 10 bpn I KAA Parameter setting System setting User name input Setting Menu Instruction 4 1 Date and Time Show current time Press the navigation key to turn off power 2 Quick Recording Mode Record ECG by direct contact of skin to the touch pads for up to 48 seconds default 24 seconds the recorded data is automatically stored by default 3 Holter Recording Mode Record ECG by connecting the lead cable and skin electrodes for up to 32 hours of recording data default 24 hours The user can mark the time during recording and the recorded data is automatically stored 4 Event Recording Mode Record ECG by connecting the lead cable and skin electrodes for a long time up to weeks but only a short time lt 8 minutes are recorded when navigation key is pressed The recorded data is automatically stored by defaul
6. e speed gt gt gt 4 stops lt a Wave 3 7 stops amplitude HPF 0 05 0 1 ae 0 2 0 5 1 0 2 0 4 Frequency 5 0Hz LPF 40 75Hz 50 60 75 100 125 150Hz 5 Recording recording time 3 24s time 6 9 12 15 18 24 30 36 42 48sec or 1 2 3 4 5 6 7min or 2 4 8 12 18 24 32h mode and sample rate dependant First value is the low threshold and er Heart rate second is high alarm threshold 100bpm threshold Adjustable between 30bpm 250bpm I II I V1 V3 I Lead setting V5 Audio monitoring High volume a medium volume 4 low volume A no volume a Flautomatic store is off 9 E Date store lautomatic store is on i Pis lead ECG A Connection A 10 electrode lis method touch pads screen saver is 11 Z Screen Saver on Z screen saver is off Cancel all 12 Cancel changes and return Save changes and 13 Save return Notes setting menu b Change the parameters a Move cursor to required item in parameter gt For those items without symbol press to select it icon will be highlighted and roll to change the parameters Press again to confirm the change 9 gt For those items with symbol press to switch between two options list in the table above c Move cursor to KI then press to cancel the operation and return Move cursor to M then press to
7. rodes placement Using the skin touch pads allows easy and quick ECG recording but prone to interferences The combinations of recording sites are illustrated below 1 Using 2 ECG skin electrodes and lead cables Lead I white at LA red at RA Lead II white at LL red at RA Lead IE white at LL red at LA Lead V1 white at V1 red at RA Lead V3 white at V3 red at RA Lead V5 white at V5 red at RA 2 Using skin touch pads Choose quick mode and make connection according to the illustrations Lead I II and Chest Press the navigation key to start ECG recording Lead Lead Il Chest Col be Cast a S Ed It may affect the recording quality if the skin is not clean and so wash the skin with soap before recording Remain relaxed during recording take smooth breath and keep away from strong electromagnetic environment 3 Operations Power on Press the navigation key to turn on the device Power off Roll the navigation key to move to the interface with then press to turn the recorder off The device will turn off if not in operation for minutes Record Press to start ECG recording in the default mode that can be preset as Quick Holter Event or Monitor mode The recording mode can also be selected by rolling the navigation key The connection method is illustrated on the screen that should be followed for appropriate ECG recording 3 Review Roll to Review and press to see the list of recording d
8. t 5 Monitor Recording Mode Record and monitor ECG by connecting the lead cable and skin electrodes for up to 24 hours The recorded ECG waveform and heart rate is shown continuously and alarm will be on if the heart rate is out of preset range The data is not automatically stored by default 6 Setting Roll to Setting press and hold for a few seconds to enter the setting mode Move cursor to the corresponding item press to select highlighting it Icon Description Quick Holter Quick mode lead I skin contact with touch pads directly by default suitable for short time ECG recording Holter mode Lead V5 connecting via the cable and electrodes by default suitable for long time gt 1 hour continuous ECG recording and Event Event mode lead V5 connecting via the cable and electrodes by default suitable for short time lt 8 minutes continuous ECG recording and Monitor Monitor mode lead V5 connecting via the cable and electrodes by default suitable for long time gt 1 hour ECG monitoring and alarm System date and time setting System setting default settings set up language default mode battery type Restoring amp User name input A Return 7 Parameter setting Item Display Name Description 100sps 200sps 1 200sps Sample rate 400sps gt gt gt gt gt gt gt 2 gt gt gt gt Wav
9. z adjustable 100 200 400sps adjustable gt 100dB Common Mode Rejection gt 100dB Input Impedance Inner Noise Display Speed Amplitude Power supply ECG Storage Control Key Dimension Weight 8 Warranty card gt 10Mohm 0 05Hz 10Hz lt 10uV RMS 2 5mm s 100mm s adjustable 2 5mm mV 80mm mV adjustable Two AAA batteries working time gt 16 hours without screen saver gt 32 hours with screen saver gt 650 hours 200sps sample rate Navigation key 90x60x 16mm 85g Cincluding 2 AAA batteries Thank your for purchasing Dimetek s product Please read the Warranty card carefully and keep it available It will be required for service Please send Registration Card back to Dimetek to fulfill the warranty Warranty 1 Please present the warranty card to the authorized 14 representatives when service is requested The warranty is void if the product is disassembled without Dimetek s authorization 2 For non quality problems please contact Dimetek s service provider 3 If the product needs to be serviced please contact a Dimetek s authorized representative 4 When warranty is expired or upgrade services are required please contact Dimetek s authorized representatives 5 For the damage caused in transportation please contact the transportation agency and inform Dimetek in time This warranty is applied if the product is used in accordance with the manufacturer

DiCare m1C User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents