TECHCONNECT TC2-HDMIW7 OWNERS MANUAL
Contents
1. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE All products are designed and imported into the EU by Vision who is wholly owned by Azlan Logistics Ltd Registered in England Nr 04625566 at Lion House 4 Pioneer Business Park Clifton Moor York YO30 4GH WEEE Registration GDOO46SY KoHS 4 DECLARATION ORIGIN All Vision products are made in the People s Republic of China PRC 2 TC2 HDMIW7_manual_en USE ONLY DOMESTIC AC OUTLETS Connecting the unit to an outlet supplying a higher voltage may create a fire hazard HANDLE THE POWER CORD WITH CARE Do not disconnect the plug from the AC outlet by pulling the cord always pull the plug itself Pulling the cord may damage it If you do not intend to use your unit for any considerable length of time unplug the unit Do not place furniture or other heavy objects on the cord and try to avoid dropping heavy objects on it Do not tie a knot in the power cord Not only could the cord be damaged but a short circuit could also be caused with a consequent fire hazard PLACE OF I NSTALLATI ON Avoid installing this product under the following conditions e Moist or humid places e Places exposed to direct sunlight or close to heating equipment Extremely cold locations e Places subject to excessive vibration or dust Poorly ventilated places Do not expose this product to dripping or splashing DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS PR2. 2 HDMIW7_manual_en
3. EU85 374 EEC This warranty protects you against the following Failure of any components including the power supply e Damage when the product is first removed from its packaging if reported within 24 hours of purchase If you find you do have a problem with this product you should contact the AV reseller you purchased this product from The original purchaser is responsible for shipment of the product to the manufacturer s appointed service centre for repair We will endeavour to return repaired units within 5 working days however this may not always be possible in which case it will be returned as soon as practicably possible In line with our WEEE commitments the manufacturer endeavours to replace the faulty parts of the product rather than replacing the whole unit This warranty does not protect this product against faults caused by abuse misuse incorrect installation unstable or faulty power input which might be caused by ignoring the guidelines set out in this manual LEGAL DISCLAIMER Because we are committed to improving our products the details above may change without prior warning This User Manual is published without warranty and any improvements or changes to the User Manual necessitated by typographical errors inaccuracies of current information or improvements to programs and or equipment be made at any time and without notice Such changes will be incorporated into new editions of the User Manual 14 TC
4. Maximum distance 7 m 23 feet Encryption 128 bit AES TRANSMITTER CONNECTIVITY 1 x HDMI type A gold plated input 1 x DC power Mini USB B for supplementary power if required RECEIVER CONNECTIVITY 1 x HDMI type A output 1 x DC Power Mini USB B 2 x POWER SUPPLIES 100 240 50 60Hz 5 volt 2 amp 10 watt USB A socket Transformer integrated into plug Includes interchangeable plugs UK EU US AU Transformer dimensions 64 x 41 33 mm 2 5 x 1 57 x 1 3 ACCESSORIES INCLUDED 1 x USB A to mini USB B cable 450 mm 18 for transmitter PSU black 1 x USB A to mini USB B cable 450 18 for receiver PSU black 1 x HDMI Cable 1 5 m 4 9 ft black WARRANTY 2 year return to base COMPLIANCES RoHS WEEE CE EMC ORDER PART CODE TC2 HDMIW7 SAP 3223892 13 TC2 HDMIW7_manual_en WARRANTY This product comes with a 2 year return to base warranty effective from the date of purchase This warranty applies only to the original purchaser and is not transferable For the avoidance of doubt this will be taken from the information held by the appointed national distributor at the point of sale If the product is DOA dead on arrival you have 21 days from purchase date to notify the national distributor via your AV reseller The liability of the manufacturer and its appointed service company is limited to the cost of repair and or replacement of the faulty unit under warranty except for death or injury
5. ODUCT MOVING THE UNIT Before moving the unit be sure to pull out the power cord from the AC outlet and disconnect the interconnection cords with other units WARNING SIGNS If you detect an abnormal smell or smoke turn this product off immediately and unplug the power cord Contact your reseller or Vision PACKAGING Save all packing material It is essential for shipping in the event the unit ever needs repair IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY TRADEMARK HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks of HDMI Licensing LLC 3 TC2 HDMIW7_manual_en SPECI AL WARNINGS Never use this product near an aircraft or medical facility It can cause interference Use of product in the following locations may result in abnormal video and audio output Product installed in the walls made of concrete e Product situated near refrigerator Microwave oven or other metal items cluttered room where the wireless signals may be blocked This product has been tested and manufactured to comply with each country s safety rules however there is no guarantee that interference will not occur in some scenarios If interference happens adjust distance between transmitter and receiver Optimal range between transmitter and receiver is between 2 and 7 meters line of sight This product may interfere 5GHz wireless devices If
6. UPPORTED AUDI O RATES e Digital Audio from HDMI inputs Up to 6Mbit s bit rate e Supports and DTS e Supports 2 channel PCM audio 16 24 bits audio sample with 32 96KHz sampling rate 10 TC2 HDMIW7_manual_en TROUBLESHOOTING If your system is not operating properly please refer to the following information Power indicators not lighting up No video displayed on display e Check if the power plugs of transmitter receiver are properly inserted into a functioning power outlet First steps Check the HDMI connection on the Tx Check the HDMI cable on the RX Select the HDMI as input source on source Check the POWER and INFO lights on Rx Power LED flashing blue OSD displayed amp 4 levels looping e Ensure the transmission range is correct POWER LED solid blue slow flashing SOURCE LED OSD displayed 439 BD e Check video resolution and frame rate on source and adjust e Connect source directly to display to check it works POWER LED solid blue STATUS LED flashing quickly OSD displayed T 59 Txis plugged to source device properly and powered on e Check display setting for your PC have been set to clone mode Projector out mode or dual display mode to enable external display 11 TC2 HDMIW7_manual_en Check video resolution on source device is compatible Poor image quality or Ensure the transmission distance is less than 7m 20 feet line of intermittent video sight Check a
7. VISION allation innc TECHCONNECT TC2 HDMIW7 OWNERS MANUAL www visionaudiovisual com techconnect tc2 hdmiw7 1 TC2 HDMIW7_manual_en DECLARATION CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a CB Certification standard Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries The product described in this owner manual is in compliance with RoHS EU directive 2002 95 EC and WEEE EU directive 2002 96 EC standards This product should be returned to the place of purchase at the end of its useful life for recycling WARNINGS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL user to the presence of uninsulated dangerous voltage within the product s enclosure that may be h The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the of sufficient magnitude to constitute a risk of electric shock to persons important operating and maintenance servicing instructions in the literature accompanying the 1 The exclamation point within an equilateral triangle is intended to alert the user to the presence of appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
8. eceiver will switch to Standby after 10 minutes automatically OPERATION The Tx and Rx can be powered on in any order As soon as they are both on the blue light will flash for 15 20 seconds while the link is established then it will stay on If operation is normal the power light and INFO light will be solid blue NOT WORKING If you don t have an image ensure 1 correct input is selected on your display device Even when there is no link an on screen display will be output from the receiver 2 computer is set to duplicate or extend the desktop Control Panel Appearance and Personalisation Display Screen Resolution 7 TC2 HDMIW7_manual_en INFO Press INFO button on Rx to see on screen display Signal Quality Source relates to other versions of product Channel Resolution STATUS INDICATORS Rx Power Rx Status Rx OSD Display LED LED off Standby Power saving Solid Red 1007 1 Boot up 15 20 seconds for Flashing Flashing system boot up Blue y p Searching If system can t Flashing Flashing available establish link over 80s Blue to cou channels after initialization Gs Wireless No input from selected Solid Blue Flashing linked source Quickly Mode Video format not Solid Blue Flashing recognized Slowly Video format Solid Blue Solid Blue recognized NOTE 1 If link does not establish the transmitter may be out of range Adjust distance between Tx and Rx The
9. interference occurs configure your 5GHz router to 2 4 GHz band only FEDERAL COMMUNI CATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules This equipment generates uses and can radiate radio frequency energy and may in extreme cases cause harmful interference to radio communications If this happens the user should try e Relocating the receiving antenna e Increasing the separation between the equipment and receiver e Connect the equipment to a different power circuit RADIATION EXPOSURE STATEMENT This equipment complies with radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator and your body 4 TC2 HDMIW7_manual_en INTRODUCTION This product transmits uncompressed 1080p 60 Hz video and audio content to a display wirelessly It uses 4 9 GHz 5 9 GHz frequencies and it adjusts frequency automatically to avoid interference It has built in Omni directional antennas and transmits up to 7 meters 20 feet LOS Line of sight with no latency TRANSMITTER Tx 1 Pairing Button for use on other versions of this product Disabled on this device 2 Mini USB power input 3 HDMI input 4 4 Status light Solid blue paired 3 1 RECEIVER Rx 1 05 power input 2 HDMI o
10. maximum video transmission range for 1080p content is up to 7m 20 feet in line of sight LOS The minimum range is 2m 6 5 feet 8 TC2 HDMIW7_manual_en NOTE 3 If no video displayed and on screen display says Not Supported Format adjust resolution and frame rate on source device SUPPORTED RESOLUTIONS Supported Resolutions Resolution 640 480 59 94 60Hz 720x480p 59 94Hz 480p 720 480 60Hz 720x576p 50Hz 576p 1280x720p 50Hz 1280x720p 59 94 60Hz 1920x1080 50Hz 1920x1080i 59 94 60Hz 1920x1080p 50Hz 1920x1080p 59 94 60Hz 1920x1080p 23 98 24Hz 1920x1080p 25Hz 1080p 24 1920x1080p 29 97 30Hz 640x480 59 94 72 809Hz DVi only VGA 800x600 60 317 72 188Hz DVi only 1024x768 60 70 069Hz DVi only XGA 1280x768 60 Hz DVi only WXGA 1280x1024 60 Hz DVi only SXGA 1600x1200 60 Hz DVi only UXGA 720p 1080i 1080p 60 If Tx LED continues to flash slower than no signal mode and there is no video or video is poor then the resolution is not supported 9 TC2 HDMIW7_manual_en imi 1920x1080i 50Hz Side by Side Half 1920x1080i 59 94 60Hz Side by Side Half 1920x1080p 23 98 24Hz Top and Bottom 1920x1080p 23 98 24Hz Frame packing If the RX status LED continues to flash slower than no signal mode or on screen display shows MER check if display supports 3D format Try switching the 3D video format on the source S
11. udio system is not muted and correct input is selected Check PC audio settings to ensure output is set to HDMI out No audio Check PC audio volume Ensure bit rate of audio from the source device can be supported Try re connecting the Tx No audio and or video Reboot Tx to re synchronize the display setting when PC resuming Please try to reboot your PC or laptop from sleep OSD displayed 2 Check the display supports 3D If Rx is connected to AV Receiver check it supports 3D Check the video output setting of Source 3D video format not supported Switch 3D video format to HDMI 1 4a mandatory 3D format No 3D video output 12 TC2 HDMIW7_manual_en SPECI FI CATIONS TRANSMITTER DIMENSIONS 83 x 30 x 17 mm 3 3 x 1 2 x 67 length x width x height RECEIVER DIMENSIONS 95 x 95 x 32 mm 3 7 x 3 7 x 1 3 length x width x height PRODUCT WEIGHT 300 g 66 Ibs set CONSTRUCTION MATERIAL Plastic COLOUR White TECHNICAL DETAILS Maximum Video Format Supported 1920x1200 1080P 60Hz 3D Video HDMI 1 3 with HDCP 1 2 Data transfer rate 40 Mhz channel 3Gbps 1080P 60 2 Data transfer rate 20 Mhz channel 1 5Gbps 1080 30 2 Audio Up to 6 Mbps AC3 and DTS 2 Channel PCM 24 bits up to 96kHz Operating Temperature Range 0 40 C Operating Humidity Range lt 80 RH no condensation Transmitter Power Consumption 7 5 watts Receiver Power Consumption 7 5 watts Latency lt 1105
12. utput 3 Status light Solid blue paired 4 INFO button press to show onscreen diagnostics information Press again to turn off 5 Power Button blue when red when in standby 6 Source LED not used on this version of product except for diagnostics 1 2 itse wi l d 5 TC2 HDMIW7_manual_en WALL MOUNTING The Rx comes with screws to mount it to the wall DRY WALL INSTRUCTIONS 1 DRILL 2 X HOLES IN WALL 47MM APART 2 INSERT PLASTIC RAWL PLUGS INTO HOLES 3 INSERT SCREWS INTO PLUGS LEAVE HEADS PROTRUDING 4 HOOK RX INTO PLACE 6 TC2 HDMIW7_manual_en INSTALLATION Connecting Rx 1 PLUGIN TO POWER 2 CONNECT TO DISPLAY with included HDMI cable 3 TURN DISPLAY ON and select correct input Connecting Tx 1 PLUG TRANSMITTER IN TO SOURCE DEVICE 2 IF BLUE LIGHT ON TX DOES NOT START FLASHING CONNECT POWER a If using with a PC connect short USB cable to a USB port on computer b If the Blue light on the Tx still does not light up connect to mains power adaptor NOTE The Tx needs 1000 milli amps mA of power to operate Laptops are only obliged to provide 55mA through the HDMI port but they often provide more so the HDMI port will sometimes power the dongle If not a USB cable is included to get supplementary power from a USB port If that s still not enough an external power supply is included When the Tx is powered on the Rx will automatically come out of standby If the transmitter is powered off the r
Download Pdf Manuals
Related Search