Home

PathAway GPS 4 - Professional Edition

1. Toggle Text Menus Refresh PathAway Manual Page 47 of 4 Toggle between iconic toolbar and text only bottom menus Left button calls up main menu right button displays menu of toolbar options Force PathAway to enumerate all maps and databases on the registered folder locations This feature can be used if PathAway does not detect the addition or removal of maps or databases from outside the application 4 Apr 07 Screens Menu f g PathAway qe q 10 32 X Options for various screen views da 4 e Full Screen Map Yiew Tracking iew Proximity iew Route iew Point Yiew Options Compass Yiew Remote GPS Sky View Sete Satellite Data View Remote Tracking iew Mext Screen Prey Screen Full Screen Map View Shows Full Screen map view Tracking View Shows Tracking view Proximity View Shows Proximity view Route View Shows Route View Point View Shows Point View Compass View Shows Compass View GPS Sky View Shows GPS Sky View Satellite Data View Shows Satellite Data View fl Remote Tracking View Shows Map Screen and list of Remotes and their proximity PathAway Manual Page 48 of 4 4 Apr 07 Remote Menu 2 PathAway a ao X The Remote menu contains commands for sending your location as well as retrieving remote locations of others Others can view your location directly on their handheld or via Web server You can also setup your handheld to retrieve the locations of others Since Pa
2. ES Cancel Format The Format dropdown lists the available formats available to send If you are sending via SMS directly to other PathAway handhelds use the PathAway format Check with your Tracking Service provider for the required format to send in Button There are certain settings required in order to correctly send your location To set this up press the button beside the Format dropdown See Remote gt Remote Settings gt Send Loc gt Send Format Settings for details Location Send Frequency Options to trigger the location send based on one of the following frequency settings Time Interval Send location at the specified time intervals Distance Interval Send is triggered every x distance traveled Distance Interval from Start Sends your location as you cross the threshold of the specified distance from your start location If you move back towards your start location the trigger will again send the location This feature is very PathAway Manual Page 113 of 4 4 Apr 07 radius Remote gt Remote Settings gt Send Loc gt Send Format Settings Dialog The Send Format Settings dialog is for specifying your account information and your identifier for the recipient to understand Account name Account name as provided from Remote Tracking service provider Password Password as provided from Remote Tracking service provider Remote ID The Remote ID represents the name that will identify you to the re
3. MMMM RARE to Single Point navigation differs from Route database navigation in that only Fallow Route Reverse a single point is routed to The Route line will appear on the map directing you Navigate to Point to straight to this point Transportation mode Tracking Record to Track Log cy New Log 0 Add to Track 04 08 05 23 12 PathAway Manual Page 71 of 4 4 Apr 07 HF PathAway e EEN ok to easily identify trips of common type El Navigate to Point bl Record to Track Log Turn on or off track recording Choose to create a new track log or to add to the current track database If you choose new track Default_Points then all travel stats will be reset I e Odometer travel time etc 355 La Tip This dialog is launched when you first connect to the GPS If you ve connected using hard key 4 E you can quickly accept the defaults Follow last route and record a new track by pressing hard key 4 again to begin tracking with GPS Transportation Mode Select the transportation mode type This enables you pss Transportation mode GPS Configure Dialog y PathAway 3 12 53 ok Device GPS Log Advanced Setup for GPS device Watch GPS input stream to ensure communications is working properly Protocol NMEA bd Pork COMs2 GPS Configure gt Device sa 4800 _ auto Detect Device Protocol Connect This is the method that your GPS device uses for communicating with other dev
4. Ol Pootes Bay E Lk Joe Rosseau_25 G Lk Muskoka 5_25 a Fa w 4 Apr 07 Sd a22 ok Delete Deletes the selected map Beam Beam maps to another device Move To Move maps to and from expansion cards Options gt Maps gt Details Edit map information such as name map type and geographical coordinates projection and datum The map details dialog is divided into sections Info and Calibration The Info section contains the information about the map The Calibration section holds information on the map coordinates Options gt Maps gt Details gt Info E E na ee E 432 ok Name Edit the name of the map The format must be a valid file name Map Details Calibration Lo Mame My Documents Pathawiay The folder name appears to the right of the Name prompt It is not editable Use the Options gt Maps gt Database gt Move To option to move databases Barrie to Northbay around folders Transportation Transportation Mode The travel type the map is intended for Allows you to hs organize maps by type I e Aviation boating Hiking etc Note the transportation mode data comes from the Vehicles prc Icon database You can create your own types by editing this database in the Icon Manager Database Options Maps E Options gt Maps gt Map Details gt Calibration The Calibration of the map requires three major components 1 Type of Calibration Ze Map Datum Information EN Map Geographic Coor
5. PathAway GPS 4 Professional Edition version 4 0 for Windows Mobile Handhelds User Manual Last Updated Jan 10 2007 Table of Contents Table OF CONTENTS iaa AAA AAA 2 Instalacion ass 6 GEtlING State ini A 9 STCAFLUPD ADOUE SCS Ai Aa 11 Main Map Screen 12 Alternative User Interface scsssicsaccacecctanasasaacaaaesatsaanacannaaancaneaasasaaeaaaasanenaaasannaaansanecaaaeaneaaaas 13 TULO Palanca 14 Screen VIEWS a o o at a e ae da at a o 14 CHOOSING a ROUES saucavedens da restate becesai ours 19 Simulating Navigate ere smaulenonaneaema beac 21 SECO O Ma DS ai AAA AAA A de E 22 Changing Map VIEWS sitiar ria 22 A B WECM MaDS eoir oa A A anne nena n etna taunt aiee 22 2 SCAUNG a Map EXPaNd SAFINK aaa tet eeneeeehin AA itis 23 Improving Visibility Of Navigation LINES cece cece eee eeee eee e ee nr 24 Capturing POINUS ON ai Map sedition cud ele outed o co es eet ania as 26 Creating ROWULCS ui A A ie NOAA ET 2 COnNeCHINOG Mal O Susi oido 27 Navigauno WEN GP Sii SA a A 28 Recording Tracks nai AAA 28 Following Recorded PACKS ao 29 Remote Tacita ico 29 Sending YOUR LOCAUON sami tinta a ni 29 MOMITOFING Remote LOCATIONS drid iia dedeaoaaoets 33 Setting up Remote Track aiia A A E A T A A A A 33 Mantal Retrieve Locations si 33 VIEWING Remote Location Sirva a end aeusdeteseeee tadeensedens 34 Changing the Remote tem Labels ita ii 34 VIEW Multiple REMOTES rra as ainia 34 M ntoring Multiple ReMmotes c
6. Dist Direct to Dest Displays the straight line distance direct to the route destination point Follow Heading Follow this course to reach next leg point Dist to Next Point Distance to next route leg point Time to Next Point Estimated time to reach next leg point Vert Dist to Next Displays the vertical distance in elevation units to the next point on the route Vert Angle to Next Displays the vertical angle to the next point as expressed in degrees PathAway Manual Page 63 of 4 4 Apr 07 Heading on Next Leg Heading to follow after next point in route is reached Dist of Next Leg Distance to next leg point after next point Time on Next Leg Estimated time on next leg point Display Right Left turn instructions Activates when next point is defined as an Turn Instructions E Intersection Time to Turn Estimated time to reach next turn HF PathAway Er qia amp a E Dashboard General Info Pe E ih e j e and aa E Map Name Map Details Time Date View Range Bae Battery Status Bl setront Free Memory Map Name Displays the current map name Map Details Displays the current map name projection and datum type Time Current Time Displays time from the Handheld when not connected to GPS GPS UTC time zone offset when connected to GPS Date Displays the current date View Range Map View range distance Horizontal distance from left to right side of screen Battery Status Battery charge status expressed as a
7. Shows the map and navigation data plus access to the point route and track a databases Useful for selecting items from the databases and displaying them on the map or placing them into a route Details such as Position Proximity Elevation Time Leg Time Leg Distance and Leg Speed can also be displayed PathAway Tip You can also traverse through the screens by pressing hard key 2 0 Bent River Store Boat Slip Finch bayview Sai FAARAO EA PathAway Manual Page 42 of 4 4 Apr 07 Compass View em ae ag Shows the navigation Compass and selected navigation data i q 1 44 x The Compass view is customizable The screen can display data in a Tiled format or a single Compass in full screen By Default the Compass view shows the following information by default Top Left Heading Compass Top Right Next Point navigation Compass Left under heading Compass Primary Location Coords Plus Time Date Speed Elevation 8 1942 0 BP GPS Sky View gt LL F Y iT T 12 06 Shows a Sky view circle showing each SVID and it s relative location in the sD coer i gt sky Also show fix and signal strength information Red Symbols indicate a GPS Fix white symbols indicate no signal gray indicates a weak signal no fix 2 Am o SQQR 5050 El PathAway Manual Page 43 of 4 4 Apr 07 Satellite Data View Ga m draa Shows Details of Satellite data Each satellite detected is listed Columns are
8. instead of a stylus you can set the program up to use text menus instead of a toolbar To do this tap on the Main Menu and choose View gt Toggle Text Menus The main screen will change as seen below You can issue commands via the left and right command keys and control the directional functions via the Tools gt Directional Keys button E L Ta wm fre me a a i E hi i u L r T ry dl MM E fi a E T kmi E AS n he a 1 e i 5 i Hi dl Hs dl re 5 P an 1 atk as i i az ih a ah A s h m we im e a al PU a i i ai E or j r F er a z a 1 E a a Mr E a E a 3 Y he we E ioe oe ee A o PA A A i k d j a S E i T I ie a t Teer N 1 mi Ta i a I 1 n a IBENI Y jo Now try following the short tutorial to get an overview of PathAway s features PathAway Manual Page 13 of 4 4 Apr 07 Tutorial Be sure you have downloaded and installed the PathAway optional components If you haven t done so already then start PathAway from the handheld Programs home page by tapping on the PathAway Icon If presented press OK in the About PathAway Screen to continue to run the program Once the program starts up you should see a map on the screen If not or you see the World Map then the tutorial maps have not been installed To determine what maps and other data is stored on your device go to the select the PathAway main menu by pressing the Main menu toolbar
9. speed elevation and direction of travel are displayed This data is the navigation data in the program In this view by default the dashboard shows as follows Upper left Elevation Upper Middle Course Upper Right Speed Bottom Left Location overlaid by Proximity and Alarm information Bottom Center Current Time Bottom Right Map Range PathAway Manual Page 40 of 4 4 Apr 07 Tracking View py at Shows the map and navigation data Default travel stats are related to i ey aes Q information specific to your current trip Default settings are Upper Left Elevation Upper Middle Course Upper Right and down current average and maximum speed Left side trip time and distance odometer Proximity View Tro ie Pathawa Tid Shows the map and navigation data plus full info for point and route l seat Q proximity Time and distance to destination and next point on track are Shown Position off or on track is also displayed 22 Fe PortCarling Marine 2380Ft Foreman Rd 2380ft Port Carling Locks L PathAway Manual Page 41 of 4 4 Apr 07 Route View na TORT _ PathA Fad Shows the map and navigation data plus full info for point proximity As you EA xd Xx approach a point distance from and course to are displayed Points in proximity are displayed by closest point Cue 227 ift PortCarling Marine 2380Ft Foreman Rd 2380ft Port Carling Locks L Point View E
10. time period With this option off PathAway will continue to monitor the GPS for data Parity Bits Stop bits Serial communications settings Most devices use N 8 1 Check your GPS manual for proper settings Buffer This is the Communications Buffer Size in kilobytes It may be necessary to increase this value for some receivers that send data at high baud rates Ie 57600 plus PathAway Manual Page 74 of 4 4 Apr 07 View Menu Dialogs Map Display Options Control what layers are displayed on the maps Show Maps Display maps on the navigation screen When not selected navigation can be done by the virtual map which will still place your recorded 3 3 points on the screen based on the current zoom factor General Coordinates Time Map 7 y Pathaway et 12 10 ok Auto Select Maps When Show Maps is selected this option will automatically switch maps when the position is no longer over the current map When this w Show Maps option is checked the zoom to No Map feature is not available if there is at Auto Select Maps least one map at the current location Auba oam whenconnected Use Gray For 4 bit maps Auto Zoom when connected With this option on the map of the highest aoe Scale M For Z detail will automatically be chosen while connected to the GPS EM een ceo Track Up Always User Gray for 4 bit maps For color devices only If you have created or _ Track Up when connected acquired 16 color 4 bit maps they
11. will use your Owner name to send along with your current location Note If you are uncomfortable send your Owner name you can select Other and pick a name that will appropriately disguise you Press Ok in this dialog then OK again in the Send My Location dialog to begin transmitting your location PathAway will transmit the location in the background When PathAway has completed sending it will return either Location Send Successful message on the status line at the bottom of the screen or will return an unsuccessful message If the send fails check the error message received and attempt to resolve the problem If there is not enough information you can check the log file in your My Documents PathAway folder It is entitled PathAwaySendLog txt This log file contains a dump of the data being sent To see your location on a web page on your PC go to http pathaway com findme and enter your Owner name or the j Pathway Account Name ef 10 59 ok PO Password Doo Remote ID EY Owner Mame CV UID E Other Po Other name you entered You will be shown the location you sent on a Google Map PathAway Manual Page 31 of 4 4 Apr 07 Cancel PathAway Find Me Location of Pat W Last Location of Pat WW 142862006 13 19 42 Speed mph 0 kph Heading 3 Msg ii E Digitalslobe Terrabletrice L hit ap data EEN Note The FindME page refreshes every 60
12. Datum Each map is calibrated using a specific datum Turn this option on if you want your coordinate system to change to use the datum of the map currently being viewed When no map is in view the Map Datum is WGS 84 Turning this option off allows you to select the datum of choice PathAway Manual Page 99 of 4 r ra itt La PathAway A STO ok Coordinates Time Map ajh Elevation volume General Distance Stak Miles Mew Trip on Startup Stay on when Connected r ra Witt La na E ES o Map IO PathAway General Coordinates Time Primary Coordinates Position DD MM mmnm F Datum Use Current Map Datum Wits Sich r Cancel Za ogaao El 4 Apr 07 Options gt Preferences gt Time PathAway e 46 1 31 bk General Coordinates Time map aj Control how time based estimates are calculated Time Estimates based on Time Estimates based on Recorded track speed l l then Custom Speed e Recorded Track Speed Report to the exact time it took previously on a followed track Applies only when following a recorded track Custom Speed 34 53 cel Then Range Time Radials minutes 2 5 10 0 6 120 2400 000 00 00 Local time offset the Custom Speed box hours From SMT GPS Calculates Speed Course _ Set Clock to GPS time e Average Speed Estimates based on current average speed e Current Speed Estimates based on current speed Set the speed in Range Tim
13. Directional hard keys wy Toggle Alarm 24 oggle all alarms on off Add Point gt Add Point at location oggles the GPS on and off In order to view the GPS state you can select a dashboard Toggle GPS pa item and set it to Tracking gt GPS Status to show the connection state and signal strength indicators PathAway Manual Page 68 of 4 4 Apr 07 Toolbar Text Menu gt Directional Keys i g PathAway et d 5 41 x These menu options allow you to set the operations of the directional hard keys This provides an optional interface for interacting with the screen when the stylus cannot be used Map Zoom In Map oom Out Scale Zoom In Scale Zoom Out Scale 100 ws OF 4 Select Scale P oom Map Scroll Map Item Selection Dashboard Selection Menu E Zoom Map Up and Down buttons perform Map Zoom In Out Left and Right Buttons perform Scale Zoom In Out Scroll Map Scroll the map using the directional keys Item Selection A pointer is shown on the screen which will allow you to point to a location on the map and select it with the Center button This will invoke the Popup Context menu on that location Dashboard Selection Move around highlighting the Dashboard areas Press the Center button to bring up the Dashboard popup menu on that item PathAway Manual Page 69 of 4 4 Apr 07 Hard Key Assignments 4 Button Devices Hard key Hard key Navigation Hard key Hard key 1 2 Hard keys 3 4 Add Cycle Zoom Databa
14. E Cancel 4 Apr 07 Retrieve Settings Dialog In this dialog you specify the settings for retrieve remote locations This dialog applies to Http retrieval only SMS retrieval is detected on receipt of the location Format The format to send the location in button beside the Format dropdown Enter the settings for the retrieve format Address The Http address to retrieve locations from Example the PathAway location test service is at http pathaway com cqi bin locpost cgi Entering http as the start of address will perform an HTTP GET operation To send via HTTP Post enter the word POST in front of the http URL Example POST http pathaway com cgi bin locpost cqdi Caution Do not enter any variable parameters on this line ie http url com x y etc Any extra parameters should be entered on the Commands line Remote gt Remote Locations Dialog Lists all of the Remote Locations by ID Checkbox Turn On to display the Remote on the map Turn Off to hide it from the display Note the Show Remote Locations option must be turned on for any remotes to be visible on the map screen See the Remote gt Remote Settings gt Map Display Dialog Tap and Hold Menu Lists the commands available on the particular remote See the Menu description list below Close Close the dialog and return to the main view screen Menu Options Info Display all details on the selected remote Show on M
15. application This name is the same name that you set into your Start gt Settings gt Owner Information screen It cannot be entered on this screen UID The handheld device Unique Device Identifier This ID is a unique number for the individual handheld device You may be required to provide this name for purchasing the application Main Map Screen Once you exit the Startup About screen you are presented with the main PathAway Map View Screen When you first run the program it will be centered on a location of one of the tutorial maps in Muskoka Canada The following illustration show the primary screen areas of PathAway P 3 10 l A A m Re a Ay ha RE e p F 4 q M y Ks alt it y s 2 a ta 5 Pe i F E ER j ib 7 a Sad E F Ta a 1 E 5 4 de a 5 a 1 q t a at E 4 o ri E E F o LAME S g E na ja ee l E Me Fan i AUPE i y he o p a ff Al ae a Tig x fn y i j i Y o ole a IRARAD PathAway Manual Page 12 of 4 4 Apr 07 Alternative User Interface If you prefer to work primarily via the device command keys and keyboard
16. battery consumption as much as possible Locking the screen and keys allows you to put your handheld in your pocket without the worry of commands being accidentally pressed Most handhelds will still communicate with Bluetooth GPS devices even if they re in your pocket Pocket Mode Start a new trip Options to start with a new track log or continue Start New Trip current and choose a new route to follow Clear the track log reset odometer Next connection will start with a new End Trip track log Agence Route Tack Move to the next route point to navigate to Available when Manual g Route Targeting is set See Preferences gt Routes Reset the Route Target point to the nearest Route Point in the direction Set Closest Route Target of travel Available when Manual Route Targeting is set See Preferences gt Routes Configure GPS Setup for GPS device Choose device type Confirm communications PathAway Manual Page 46 of 4 4 Apr 07 View Menu Map Display Show options for Map Display Show Hide Dashboard Turn Dashboard On Off er EE Esi xX Display Show Dashboard Default Dashboard Show Taskbar w Toggle Toolbar Options Remote screens Yiew Toggle Text Menus Refresh Default Dashboard Restores original Dashboard for current screen Toggle Taskbar Turn Top taskbar on off Toggle Toolbar Turn Bottom toolbar on off Re activate it via context menu
17. by editing the attributes of the remote To change attributes tap and hold on the label and choose the label name in the menu followed by Edit Point This will bring up the Remote Item Attributes dialog In the Remote Item Attributes dialog you can change the Text and the background color of the Remote by selecting the appropriate buttons You can also set a different display name for the Remote Some Tracking servers require a long numeric id for the remote Using this ID on the Remote label can obscure the map screen and make identifying which remote you are viewing difficult In the case here if you re editing the Remote ID Michael J setting the label to Mike will now cause the label on the screen to appear as Mike instead Keeping Pace You can use PathAway as a PACE monitor for activities such as rally racing sport training and time based arrival businesses such as shipping tour guide operations and aviation Essentially this feature monitors your speed and distance vs your pre defined average speed and distance You can even pace against a previously recorded track or use the distance from a plotted route To setup for Pace Monitoring you ll need to launch the Preferences gt Pace dialog set the desired pace targets then edit the Pace Dashboard items to have the Pace Data show up on the screen The following example will show you how to setup PathAway to keep pace with an average speed of 30 mi
18. distance to ETA to etc lt Closest Point gt Displays the name of the closest point if any cd e pode Displays a list of points found in the geographic lt Points List gt coordinates of the selected location PathAway Manual Page 58 of 4 4 Apr 07 distance to ETA to etc Add Point Adds the selected location to the Points database Calls No point selected up Edit Point dialog for naming and selecting icon Add Route Pt Adds selected location to the route O wen there iS ene Route and location not on route Adds the selected location to the route and flags it as a Add Turn Instruction Turn point Note the Intersection icon is the indicator of a Turn Edit Displays the Point Edit dialog for the selected point Point selected Adjust Location Allows adjusting the location of the selected point by Point selected tapping it s proper position on the map Delete Point Deletes the selected point from the Points database Point selected i Go to the Points dialog to choose other Routes Same Points i S as selecting the main menu Options Points Measure Distance between 2 points You can measure distance between the current point and the selected point or select any two points to measure the distance between Shown when there is an Active Route and location not on route Measure I La 4 HF PathAway e 423839 6 Map Popup Menu gt Tracking Menu gt os Shows the options available at the curre
19. gt 8 a A Scale Zoom Out of the current map by shrinking the map a El Restore the map to 100 view No Scaling is done for this view If there is no active map this button will bring up a dialog allowing you to specify the desired zoom range Map Zoom Out no Map There is no map available to Zoom out to Pressing this button will go to the virtual map view where no map is shown on the screen If there is no active map this button performs a Scale Zoom Out Map Zoom In no Map There is no map available to Zoom In to Pressing this button will go to the virtual map view where no map is shown on the screen If there is no active map this button performs a Scale Zoom Out Map Zoom Out to another Map When the Map Zoom Out button is highlighted it means there is a lower resolution map at the current location Pressing this button will show this map on the screen a Map Zoom In to another Map When the Map Zoom In button is highlighted it means there is a higher resolution map at the current location Pressing this button will show this map on the screen Please note moving between stacked maps should not be confused with map scaling where you zoom into or out of a single map by expanding or shrinking the map Map zoom moves between layers of maps of different resolutions Scale zoom expands or shrinks the current map PathAway Manual Page 67 of 4 4 Apr 07 Toolbar Text Menu Pathaway am d 5 41 Fer
20. important information about this release Once installed proceed to the Getting Started section of the manual PathAway Manual Page 8 of 4 4 Apr 07 Getting Started Before starting you should have downloaded and installed the PathAway software PathAway PC tools and the sample data maps point icons and vehicles in either gray scale or color format Also ensure the application has been installed on the device PathAway is installed to your Programs folder on your handheld To access the PathAway application first click on the Windows Mobile Start Menu and choose Programs To run the PathAway application tap on the PathAway Icon to start the application PathAway Manual Page 9 of 4 4 Apr 07 e 2613 amp a E Games AvantGo Calculator w id File Explorer iPAQ Backup iPAQ Image Viewer CY Task Microsoft MSM Reader Messenger a Pictures Pocket Excel E You may need to scroll down to locate the application icon If the application cannot be found you will need to run the installation program from your PC again PathAway Manual Page 10 of 4 4 Apr 07 Startup About Screen If you are running the free time limited trial version you will first be presented with the Startup About Registrat
21. mj 4 Apr 07 Goto gt Find Location gt Options o PathAway et 27 59 ok Find Location Find Location allows you find a specific location and either center the map on it add it to a route or create a new point You can find locations by the following Find by Location Coordinates To enter specific location coordinates and center the map on this location Useful if you know the exact coordinates Lookup Street Address you need to go to You can also calculate coordinates by the relative distance O Web access required from current location See Goto gt Find Location gt Coordinates section for C Find stored paint the next screen from this command 0 Find start of route Lookup Address This feature requires Web Access Enter an physical _ Find start of track street address to locate Once found you can center the map on the point add it to your stored list of points or add it to a route Find stored point Locate a stored point from your list of point databases Once found you can center the map on the point or add the point to a lt Back route Find start of route Find the start of the current route and center it on the map or create a new route to go to this point Find start of track Find the start of the current track and center it on the map or create a new route to go to this point Goto gt Find Location gt Coordinates y PathAway ey 42 8 05 ok po ae no Find Location Enter specific loc
22. new data item from the Popup menu See Dashboard Context Menu GPS Global Positioning System uses a series of satellites to transmit data to receivers enabling them to accurately pinpoint their location and elevation on earth Originally developed by the U S Department of Defense as a military system GPS has become a global utility It benefits users around the world in many different applications including air road marine and rail navigation telecommunications emergency response oil exploration mining and many more PathAway utilizes connections to GPS devices to provide accurate positioning data Icons Icons in PathAway can be created and modified by using the PathAway Tools Icon Manager Original Icons can be created from a paint program in Jpeg or BMP format and imported into your Icon database These icons can then be used in PathAway to mark Points Map Data Map Data refers to a database containing a map The Map Manager is used to create maps for PathAway The current version runs under Windows 95 98 2000 XP ME or higher Original maps can be in Jpeg BMP PNG GIF or TIF format You can create your own maps in a Paint program or acquire the maps through scanning CD ROM or download from the Internet You must ensure you do not violate copyright rules applied for the maps acquired In the Map Manager you can enter the Long Lat coordinates for the top left and bottom right corners of the map as well as the color depth Gra
23. of the points in the Route and select Follow Forward or Follow Reverse from the Route Menu gt Popup Show Active Route Show Hide the track line of the active route being followed Line to next point Show Hide the line from the current location to the next point Line to next turn Show Hide the line from the current location to the next turn point Circle next point Show Hide the circle showing the Route Target Proximity Radius around the target point See Preferences Routes for more info eye 12 08 ok General Coordinates Time Map EIG MapDisplay e _ Show All Enabled Tracks show All Enabled Routes Show Active Route Line to next point Line to next turn Circle next Point _ Circle next Turn Show Time Radials Show Distance Radials Show Points Show Icons Normal Icons j PathAway Cancel Circle next turn Show Hide the circle showing the Route Target Proximity Radius around the next turn See Preferences Routes for more info Show Time Radials Shows circle on map indicating the time it will take to travel to locations on the map Configurable in the Options gt Preferences gt Time dialog Show Distance Radials Shows circle on map indicating the distances to locations on the map Show Points Show the recorded point icons and or labels on the map screen Show Icons Show the point icons When you zoom out you can specify the threshold when the icons are not to be displayed This i
24. or send it to your handheld You re ready to use your new icon as a point PathAway Manual Page 121 of 4 4 Apr 07
25. percentage Free Memory Displays the amount of available memory PathAway Manual Page 64 of 4 4 Apr 07 Dashboard Pace Info Speed Delta Time Delta Distance Delta Target Speed Customizing Screens Fa PathAway ey 45145 X General Info Time Delta Fr Info Distance Delta Set Font Target Speed Displays difference between the target speed and the actual speed A down arrow indicates you are ahead of the target speed and should slow down An up arrow indicates you are behind and should speed up Displays how much time you are ahead or behind the target time A down arrow indicates you are ahead of the target time Up arrow indicates you are behind Displays how far you are ahead or behind the target distance A down arrow indicates you are ahead of the target distance Up arrow indicates you are behind Displays a speed you should travel for the specified correction distance in order to catch up to the target time For example if you have set the correction distance to 5 km then the target speed will show the speed you need to travel at in order to catch up or fall back into the target pace you have set All of the screens contain a customizable dashboard Each screen has a dashboard setup associated with it Here is how to customize the dashboard To Hide the Dashboard choose the main menu select View then Hide Dashboard The screen will look similar to the this Hide the Dashboard for large screen
26. point if any Select lt Closest Point gt gt the item to display a list of commands to operate on Shown when a Point is selected the selected point Adds the selected location to the Points database Add Point Calls up Edit Point dialog for naming and selecting Shown when no point selected icon Add Route Pt Adds selected location to the route enon en there IS an Active Route and location not on route Center Map Centers map at selected location For all Taps Display the commands available on the current map Map Menu gt Includes repositioning zoom rotate and other map Shown always selection PathAway Manual Page 52 of 4 4 Apr 07 Display the commands related to points on the map Point Menu gt Includes Add Point add to route and measuring distance between points Route Menu gt Display the Routing commands available Tracking Menu gt Display the Tracking options available Displays list of other points in the proximity of the Other Points gt selected area Main Menu Displays the Main menu Tools Menu Displays the Tools menu Map Popup Menu gt closest point fi Contains location sensitive options for the currently selected point Show details of point edit the point or delete it Name Description Displays a screen showing detailed information Details about the point such as distance to ETA to etc Edit Point Displays the Point Edit dialog for the selected point Show Picture Di
27. press OK until you get back to the cia a E Ontario Cities map screen cobs Ontario towns Default Points On your map you should have one red straight red line heading from Footes Bay to Rosseau But you re not flying there so you ll have to choose to alter the route Pick a point along the water and tap on the map Choose the Add klei6a 118 Test Points Edit Databases to Route button Press OK from the Edit Point dialog to accept the point The point will be added to the route and the route line is altered to reflect the change PathAway will insert the new point between the two closest points along the route Note Alternatively you can choose to navigate to just a single point by selecting the point on the map and choosing Add to Route gt New Route from the Popup menus Choose the option to Navigate to selected point from the New Route dialog Database Options Sort Connecting a GPS y Pathaway eh ME 12 53 ok Device GPS Log Advanced Now that you ve got the basics its time to get on your PathAway PathAway wo MEA System device Most GPS devices transmit location information through a seria Protocol attach directly to the device See the support page for a listing of compatible G Pork CO 4800 autoDetect To setup your GPS device for use in PathAway select the menu GPS Baud seco y _ Auto Detec Configure Choose your GPS device protocol from the list Most GPS devices Connect use NMEA s
28. run from your Start Programs menu Map Manager Use the Map Manager to prepare maps for PathAway The application is quite simple and straight forward For detailed information see the PathAway Map Manager manual Quick Start TO prepare a map follow these steps Ensure the map is in either Jpeg or BMP format Run the Map Manager To import a map choose from the menu Map Import Map Select your map from the dialog The Map Manager will convert the image into the format necessary to display in PathAway Next give the map a name and set its color depth The color depth must at least match your device s Most handheld devices support color depths that are equal to or less than the maximum available on the device I e if your handheld device supports up to 256 colors then 4 bit gray scale maps will work You can enter the longitude and latitude coordinates at this time if you know them If not it is sometimes easier to match them up to known geographical points This is done once the maps are transferred to the device See section on Calibrating Maps The position coordinates can be specified by one of the following methods 1 By top left and bottom right corners or 2 By the map center coordinates and the total distance covered by the map Total distance is in statute miles To convert from nautical miles to statute miles multiply nautical miles by 1 151 For Kilometers to Miles multiply kilometers by 0 621 3 by a number
29. the Web URL of the recipient server Example http pathaway com cgi bin locpost cgi This will perform an HTTP GET E request to the web server To send via HTTP Post enter the word POST in front of the http URL Example POST http pathaway com cgi bin locpost cgi Caution Do not enter any variable parameters on this line ie http url com x y etc Cancel Note You can send to multiple locations by separating each address with a semi colon 7 PathAway Manual Page 112 of 4 4 Apr 07 Format The Format dropdown lists the available formats available to send If you are sending via SMS directly to other PathAway handhelds use the PathAway format Check with your Tracking Service provider for the required format to send in Button There are certain settings required in order to correctly send your location To set this up press the button beside the Format dropdown See Remote gt Remote Settings gt Send Loc gt Send Format Settings for details Comment Entering a comment will cause a message alert to popup on the recipients screen OK PathAway will transmit the location in the background When PathAway has completed sending it will return either Location Send Successful message on the status line at the bottom of the screen or will return an unsuccessful message If the send fails check the error message received and attempt to resolve the problem If there is not enough information you can chec
30. will look up the address on the internet and present a list of results PathAway Manual Page 110 of 4 i Pathaway j PathAway ee a 3 07 ok Skart ab M9 44 240680 M45 09 345040 Enter distance and course to location Course as degrees Calculate Feet Result We 44 156409 M45 09 403996 Eg Cancel ey 3 02 ok Find Location Address 121 Yonge st toronto orl Enter the address in the Form of 123 Mame Streek City State Country 4 Apr 07 Find Location gt Address Results Dialog y PathAway a 26 15 Dk Find Location The list of addresses found is returned in a list Search Results Select the address from the list and press Next If the desired address is not iii E pa E on the list press Back to edit the Address entry Find Location gt Finish Dialog ON PathAway ar f 6 49 ok Find Location l Provides list of choices of what to do with the location found What do you want to do with this location Add to Route Adds the location to a new or current route Add as Point Adds the location as a new point Show on map Center the map on this location Show on map Navigate to this location Create a new route to this location Any existing Navigate to this location route will be overwritten C PathAway Manual Page 111 of 4 4 Apr 07 Goto gt World View World view displays your location on a view of the world This feature is useful for easy scrolling to a
31. 4 4 Apr 07 Options gt Preferences gt Colors amp Lines gt Line Style 7 ia PathAway er 9 15 The Line Style dialog displays the current style for the chosen Line Type e Change the color by clicking on the Color button and the width of the line by colors and Lines pressing either the or buttons beside the width label To have a circle drawn at each Route Point check the Show Points button Turn on the Show Turns setting to display an Icon used to display the turns attached to the route Show Points Show Turns S 2 PathAway er f 9 15 Options gt Preferences gt Colors amp Lines gt Position a e ole xE Marker The Position Marker is the Arrow or cursor in the center of the screen It represents your current geographical position on the map If you are navigating with a GPS it points in your direction of travel If you are disconnected and following a route it will point in the direction to the next point in the route If no route is being followed you ll see only the cross hairs You can set the style of direction pointer in the Position Marker Style dialog To do this click on the Position Marker button from the Lines Style Dialog j 3D Effect In the Position Marker Style dialog you can choose the desired Direction MIS Arrow style color and size of the marker For more emphasis on screen set E 3D Effect the 3d Effect to create a shadow behind the marker 10382240 El Path
32. 90 degrees to the left Rotate Right Rotates the map 90 degrees to the right Rotate 180 Rotates the map 180 degrees North Up Rotates the map so North is facing up East Up Rotates the map so East is facing up West Up Rotates the map so West is facing up South Up Rotates the map so South is facing up PathAway Manual Page 56 of 4 4 Apr 07 FF PathAway eo 2655 amp Map Popup Menu gt Map Menu gt Choose Map gt Shows all the maps that fall within the current location Maps are ordered from highest range to lowest in relation to the current map The indicates the current map E Fi la a E gt i 1 H a 2 i issi k 3 i arm SouthOntario TorontoMap Barrie to Northbay 3 Muskoka Lake Joseph 25 Lake Josephs Lk_Rosseau_South Lake Joseph Other Maps Sa ogaao Ml 7 PathAway e 42700 ES I L Map Popup Menu gt Route Menu gt Shows the Routing options available at the current location If a Route Point is under the location clicked on then options for this point are shown Edit Point Add Route Pt Add Turn Instruction Delete Point Delete Route Pt Follow Forward Follow Reverse Calculate Area Mew Route Routes Name Description Action PathAway Manual Page 57 of 4 4 Apr 07 lt Route Name gt Displays the name of the current route if any Displays the Point Edit dialog for the selected route point A
33. Away Manual Page 105 of 4 4 Apr 07 Options gt Preferences gt Pace y PathAway et 12 28 ok Route Point Pace Colors and Lind 4 gt Monitor Pace By The Pace feature allows you to define a certain pace that you are trying to maintain and PathAway will monitor your travel and display your pace time and distance information on new dashboard items Set the Recover Distance Awerage Speed and PathAway can tell you the required speed to travel at for the specified Average Speed distance in order to catch up to the desired pace Great for sports training Elapsed Time and Distance rally racing and arrival time scheduling arrival Time and Distance Current Route The Pace Monitor information display is set via Dashboard menu settings See Dashboard gt Pace Menu Monitor Pace By Correction Distance Average Speed Set a fixed average speed that you want to 1115100000 a maintain PathAway will inform you as you travel how much you are ahead or behind this average speed Correction distance will inform you of the Recover Speed you must travel in order to get back to ad 4 the pre set average speed Advanced T Elapsed Time and Distance Enter the distance you need to a travel and the time you have to travel in Distance can be a fixed E Cancel distance or a distance determined by the current route being followed PathAway will calculate the average speed required and Pace you along the way Arrival Time and D
34. Conformal Conic UTM and Transverse Mercator naay Ca tx 333 ok All projected maps require the library ProjLib dll and their appropriate Map Details Calibration 0 projection library except Lambert Conformal Conic which is built into ProjLib Type Projection F Projection Refer to the Advanced Mapping Manual for more information on ambert Conformal Conic specific projections and how to set them up in PathAway Datum Wits Sich Projection Parameters Calibration Points Database Options Maps E Known Points The Known Points type of map is calibrated by using three or more known points The points can be set from the Calibration Points dialog or via selecting points on the map via the Options gt Calibrate Map dialog T I hy Lu Ha PathAway A EEE ok lap Calibration This technique should be used when a projection is not known or the map does not have horizontal and vertical latitude and longitude lines If the map is slightly skewed then this method will provide the best accuracy Each known point has a geographic location coordinate and a pixel offset on Calibration Points the map Za GAARAD El PathAway Manual Page 90 of 4 4 Apr 07 3x3 Touratech QV The 3x3 map type is a non rectangular map type controlled by 9 coordinate positions on the map Currently these map types can only be generated and calibrated using Touratech Desktop mapping software See the section on To
35. ManDemo without the quotes Leave the Password blank Set the Remote ID to Other and clear the Other data field of any text This will get all of the available remotes Press OK until you return to the main map screen Select the main menu option Remote gt Retrieve Remote Locations Monitoring Multiple Remotes 7 5 PathAway ar i702 X i The screen to the right shows approximately how the Remotes will appear on the Map screen If you do not see the remotes select the option Remote gt Show Active Remote Then if you still are not viewing these remotes select Remote gt Show Next Remote Once you are viewing one Zoom out until you can see the location of all 3 These remotes should appear within the bounds of the tutorial maps Now Zoom in until only one or none of the remotes is visible To monitor all of the remotes you can have PathAway automatically cycle through and center the map display on each individual remote on a time interval To cycle the remotes select the main menu option Remote gt Auto Center Remotes The default is to cycle the remotes every 10 seconds To modify this interval go into the Remote gt Remote Settings dialog Auto Center section and change the time interval Gn GRAGAB PathAway Manual Page 35 of 4 4 Apr 07 Modify Remote Label Attributes You can see from the labels that all of the remotes are in different colors These colors can be changed
36. My Documents 2 Searches and registers a PathAway folder in all storage cards found If the storage car does not have a PathAway folder it will be created and a Database volume is mounted PathAwayDBV cdb This allows reading and writing of Tracks routes and points on the card Subsequent startup ds Storage cards are not automatically searched for They must be registered via the Options Folders dialog 2 Card Insertion Removal Will automatically register cards inserted while PathAway is in use My Documents PathAway for device Memory Storage Card PathAway for expansion cards PathAway Manual Page 97 of 4 4 Apr 07 o OS Folders Dialog Commands Delete Removes a folder from the Folder Enumeration list PathAway will no longer search for databases in this folder Note the My Documents PathAway folder cannot be removed Add Register a new folder PathAway will look for databases in the new folders Note PathAway does not search for databases in sub folders I L Options Folders Add Folders py PathAway E l 3 48 ok This dialog allows you to add and remove PathAway folders Simply Check the Select Path Data Folders folders you want PathAway to look for databases Uncheck folders to remove MES N dd i them from the enumeration list Note the My DocumentsYPathAway folder _ i a cannot be removed H E iPAQ File Store E E My Documents To view the sub folders press the sign t
37. aian A A 35 Modity Remote Label Attributes io 36 KECDING Pacino ibi dois 36 Settina UD OF Pace MONITOR A 36 TEE nInolOd Vacances 38 DAS DO o 38 GPS naa AAA AAA ab 38 CONS cari irradia ar dana eea de 38 Mabe 38 PA td al EET 38 PONES tia rain iia 38 PROXIMO anna cee 38 Sl lil lee saccesccuissamssneo S RRA 39 ROmoOtess mirada opio iii dba aaa 39 Remote TAI A OS 39 FO P PEPE ROO RARA 39 Travel Transportation MOd isso aa 39 PathAway Manual Page 2 of 4 4 Apr 07 TA Sacre catches cha eck TA 39 Reference a a e es e O Navigation SCFeensS iii circa rre aadi 40 Navigating WENQUBIM ADS a A A E 45 Navigaung WIth MAPS ia is EA AAA AA 45 NaVidalinG WIth a GPSiDEVICS id A AA AAA A ccaeS a va 45 Mall Menta A AA A 46 GPS Menta e a ll o ds e o iS 46 Mew Mera nea oca abrio 47 SCLCens INS eones 48 Remote MSN Uria cid 49 OPUNE AMG Uat a ld Stas 50 SOLO MCFG AN IA 51 Context Sensitive POPUP MenNUsS visssssicecsccccciscndsdenddevsdsiscccsncntccdpcnceceuscusecrtsnnsesnaeesecnassssctaews 52 Map POPUD MENUS eri soem eieuacrs a o tse e Re Gai be Gee erat ee 52 Map Popup Menti Top Level canadian 52 Map Popup Men u gt closest DOI tania A aan 53 Map POpUp Menu gt Map Menu ia II A A i teeeiee en eeaaees ies 54 Viap RPOpUp Me u gt Mab MenU gt ZOOM Map criada 55 Map Popup Menu gt Map Menu gt Rotate Maia tenet iietinehdl ius iecesean 56 Map Popup Menu gt Map Menu gt Ch00se Map gt cccscscccccscuerencucueccucvensu
38. ap Center the selected Remote on the map F PathAway or si 12 78 ok Formar Path way EN Address http pathawawy compcgi binslocpost cgi a Commands i Pathaway ex 3 01 ok Remote ID E John w E Michael J E Pat w E sue Q New Remote ID Create a new Remote ID The Remote Item Info dialog will be called up in order to set the Remote ID label and display colors Edit Edit the current Remote details in the Remote Item Info dialog Delete Delete the selected Remote PathAway Manual Page 115 of 4 4 Apr 07 Delete All Delete All remotes in the list Remote gt Remote Locations gt Edit Remote Item PathAway an 12 57 ok aa Remote Items can be displayed in different colors and with either it s ID or Mema a simpler label name These can be changed by editing the attributes of the remote Label Transportation ID Identifier of the Remote This ID must match the ID identified by the Remote Tracking Service Background Label Display label for remote Use in cases where the remote id is a very long name or if a more descriptive name is required Background and Text buttons You can change the Text and the background color of the Remote by selecting the appropriate buttons This will bring up a color palette dialog where you can change the colors associated with the remote Eg Cancel Remote gt Remote Settings gt Map Display Dialog The
39. ap and selecting Add to Route from the menu Name Name of Route Edit Points Modify the points in the route Add new points delete points o change order Launches the Point Record Management dialog Mode of Transportation Select the transportation mode from the list Icons can be created using PathAway Icon Manager PathAway Manual Page 79 of 4 4 Apr 07 Options gt Tracks ci your recorded tracks Choose a track to follow for pinpoint accurate Eg PathAway He d 9 25 ok Manage your tracks by duplicating or joining tracks and transfer between y Track 04 07 26 19 49 191 Garmin GPS devices WE E ACTIVE Los H Eb to Otter Lake 0 403 g 66 10 2 Ol Bracebridge to Po 92 Ol Default Tracks 111 2 TRACK 04 05 2 6 IG Track 04 06 05 16 39 1397 Tracks Dialog Buttons er qf 8 37 ok Note On some Operating Systems the buttons described below are found on the Menu Eb to Otter Lake 04 07 e6 10 Follow Selects the track as a route Can follow tracks in the order they were 4 E Eracebridge_to_Port recorded forward or in reverse order An f for forward or r for reverse is displayed on the track list indicating the track currently selected to follow E Default Tracks E Track 04 05 2 Activate Sets the selected track as the active track log The track is ack 04 06 05 16 3 Displayed on the current navigation screen All subsequent position recording g E 04 06 10 01 41 added to this track
40. ase you want to append to the previously selected one Press OK The Join will be performed Deletes the selected point database Beam entire point database to another handheld device Move database to and from expansion card Send point database to Garmin GPS device Download points directly from a Garmin GPS device Import GPS LOC or PathAway pw files into PathAway databases Brings up a file selector dialog that allows you to select the file to import Exports the selected file to PathAway comma delimited format Brings up a file selector dialog that allows you to select the file to export to Page 96 of 4 4 Apr 07 For tracks the default extension is pwtrk Routes is pwrte Points is pwpts Note do not export to a folder where PathAway has a registered folder A PathAway delimited file in these folders will be automatically imported when the program starts up Options gt Web Maps f PathAway d 2 10 ok Beta for Experimental Purposes m Web Maps WebMaps is a feature which allows you to download maps on the fly while navigating via GPS WebMaps accesses various Web Map Servers to extract Source Terraserver US4 portions of the map to fill the screen With WebMaps you will always have the screen filled with a map since new map sections are downloaded and displayed as you move Type Topographic Note the maps are extracted from third party services so their availability is Show Cached Maps when offline not guarantee
41. atabase Add Duplicates Points Downloads waypoints from GPS into selected Points database PathAway Manual Page 86 of 4 4 Apr 07 Options gt Tracks Routes Points gt Send To GPS Device For sending data to handheld GPS devices This operation is supported for only Garmin GPS devices in Garmin Garmin Interface mode and Magellan NMEA Please ensure that your GPS device is on and connected before selecting this option Routes Sends selected route to GPS All points in the route may be uploaded as waypoints linking to the route Tracks Sends selected track to GPS as a track log Points Sends points from entire Points database or only the currently selected point Points are stored as waypoints on the device Options gt Maps Lists all loaded maps Choose display to show the map on screen Transfer maps between memory expansion cards Close Returns to the current navigation screen Show Displays currently selected map on the current navigation screen Delete Deletes the current map Details Allows editing of the map details Map Dialog Menus Name Description Calibrate Map Calibrate selected map to it s geographic coordinates PathAway Manual Page 87 of 4 q PathAway M Ig Add Route Points Track 04 07 26 19 49 Points From Default Points E Barrie to Northbay Bl Muskoka Ol Southi ntario Ol Muskoka Upper Ol Joseph River Ol Lake Joseph 5 Ol Lake Joseph 25 Ol Lake Joseph
42. athAway GPS 4 Installation program can be downloaded from the internet or provided on CD The installation program comes in the form of a Windows Executable Setup program Before Downloading Ensure You have read and accepted the License Agreement as posted on the Download Page and in the Install program PathAway supports your Handheld Device Processor ie ARM XScale PathAway supports your installed operating system ie Pocket PC 2003 You have enough memory available to meet the specified system requirements You have enough disk space available on your PC to download and install the PathAway Tools he ee All the necessary information will be posted on the Download page Follow these steps to download and install the application if you are downloading from the Internet If you re installing from CD or other media please refer to the instructions that come with it Press the Download PathAway button from the site The following screen will appear if you re using Internet Explorer 6 Your actual screen may be different depending on the installation of your Internet browser File Download x Some tiles can harm pour computer IF the file information below ss looks suspicious or you do not fully trust the source do not open or save this file File name Pathway WMFullInstall exe File type Application From pathaway com ee This type of file could harm your computer if it contains malicious code Would wou like t
43. athAway Manual Page 15 of 4 4 Apr 07 Proximity View Shows the map and navigation data plus full info for point and route proximity Time and distance to destination and next point on track are Shown Position off or on track is also displayed PortCarling Marine Foreman Pd Port Carling Locks Route View irs E i ie Patha A m 724 Shows the map and navigation data plus full info for point proximity As you A x one Xx approach a point distance from and course to are displayed Points in proximity are displayed by closest point 227 ift PortCarling Marine 2380Ft Foreman Pd 2380ft Port Carling Locks L PathAway Manual Page 16 of 4 4 Apr 07 Point View Shows the map and navigation data plus access to the point route and track databases Useful for selecting items from the databases and displaying them on the map or placing them into a route Details such as Position Proximity Elevation Time Leg Time Leg Distance and Leg Speed can also be displayed r ng Pathway 5 a 7 31 X Y I F if Tip You can also traverse through the screens by pressing hard key 2 0 Bent River Store Boat Slip Finch bayview Compass View dry a ra Shows the navigation Compass and selected navigation data ein PathAway i q 1 44 x The Compass view is customizable The screen can display data in a Tiled format or a single Compass in full screen By Default the Compass view shows the following i
44. ation coordinates If the location is relative to an existing location You can calculate the position by entering the distance and course Datum 5594 offsets to the new location Datum Datum coordinates must be in Latitude N45 09 345840 Latitude Longitude or Grid Northing Easting Enter coordinates in the Longitude 79 44 240580 format defined in the Preferences gt Coords dialog Calculate Calculate the position by entering the distance and course offsets Sell to the new location See the Calculate Location Dialog PathAway Manual Page 109 of 4 4 Apr 07 Calculate Location Dialog Calculate a location by entering the distance and course offsets to the new location Distance Enter the distance to the new location You can specify the distance units in the dropdown beside the distance field Course Enter the course in degrees to the new location The value must be between 0 and 360 degrees Calculate Press this button to calculate the new position It will be displayed below in the result line OK Press OK to save this new location and place into the previous screen Find Location gt By Address Dialog Find location by address requires an internet connection The connection can be wired through ActiveSync or wireless via cellular data or Wifi Enter the address of the location to search for in the form of a comma separated string Street City State Country Once entered press the Next button PathAway
45. can be customized differently This allows you to quickly change to a view most appropriate for navigating PathAway ey dida X Tapping on a Dashboard item allows you to have different information displayed at the dash location tapped on If no information is selected for a Dashboard or there is no information available then a small bar is displayed Clicking on the bar will also bring up the Dashboard menu The following describes the Dashboard menu Options Location C Routing Info Name Description Hide Removes the currently selected info from the selected Dashboard Set the primary font for the currently selected item Brings up the Set Font Set Font Dialog PathAway Manual Page 61 of 4 4 Apr 07 I L HF PathAway e iaae ok Dashboard Item Set Font Dialog Font Size Dashboard items all consist of 2 potential lines Set the font size desired for the Top and bottom lines of the selected dashboard item Dashboard Tracking Info a E SS H North Arrow j ae Locat Trip Dist iodo aa Hide Elapsed Time ie average Speed GenerYert Speed ES Set FqProximity Heading Shows current Heading course direction Elevation Shows current Elevation Speed Shows current rate of speed Location Coordinates Shows current position in the Primary Coordinate setting Options gt Preferences gt Coords Shows current position in the Secondary Coordinate setting Options Secondary Coordinates gt Pref
46. can be displayed in either 16 colors or Show North Arrow gray scale Show Active Track Show All Enabled Tracks Scale Maps for zoom Enable map scaling With this feature on PathAway Show All Enabled Routes enables scaling of maps for scale zoom in and out Show Active Route Track Up Always Rotate the display of the map so the direction of travel is always pointing towards the top of the screen Map rotates in 90 degree increments Cancel Track Up when Connected Operates when there is a GPS Fix only Rotate the display of the map so the direction of travel is always pointing towards the top of the screen Map rotates in 90 degree increments Show Active Tracks Show the currently active track log line For color devices the log is shown in blue For gray scale devices the track log is gray and identifiable by the points that connect the lines PathAway Manual Page 75 of 4 4 Apr 07 Show All Enabled Tracks Display all the available tracks on the device This feature may cause the screen to draw quite slowly depending on the number of tracks in memory This feature is useful to see all the tracks you ve traveled on To select a track to follow tap on one of the track points and select Follow Forward or Follow Reverse from the Tracks Menu gt Popup Show All Enabled Routes Display all the available routes on the device This feature is useful to see all the routes you ve created To select a route to follow tap on one
47. cipient of your location The ID to send can be set to your Owner name or UID as it appears on your handheld or it can be set to a custom ID by selecting Other Usually Remote Tracking Services have a unique name registered for each device authorized to send it s data Remote gt Remote Settings gt Retrieve Loc Dialog Settings and Configuration for Retrieval of Remote locations Automatic SMS Location Receive If your handheld has SMS Simple Text Messaging capabilities turning on this option will monitor the incoming SMS messages for Remote Locations As messages are received then will be shown on the map Automatic Http Location Retrieval Locations tracked via Http are posted to a Web based Tracking Server Polling Interval Applies to Http Location Retrieval Set the time interval between checking and downloading new locations Note If you are polling often this could result in significant data usage charges from your service provider Settings Go to the Retrieve Location Settings Dialog to configure PathAway for Remote Location retrieval PathAway Manual Page 114 of 4 e PathAway wo 4210 59 lok Account Name IN Password Doo Remote ID 3 Owner Mame UID 0 Other Cancel i PathAway ye 45 2 55 ok Send Loc Retrieve Loc map autd 4 Automatic SMS Location Receive Automatic Http Location Retriewal Polling Interval Every 10 00 minutes Settings
48. cture Mame Default Points Lake Joe Club Rd Se intersection Mote Add to Route Database pE PathAway e m 9 71 ok I L Info Location Mame Default Points Badgerow Is E Icon dy Building hote Point Building Intersection Landmark Black Point Database 4 Apr 07 Options gt Points gt Edit Point gt Location y PathAway a2 7 01 lok Ld Longitude Latitude Geographical coordinates for the point See Entering Info Location Sound Picture Location coordinates for information on how to enter location coordinates If Datum MWG5a your units are in other grids such as UTM or OSGB then the data entry prompts will be Grid Northing and Easting Latitude M45 07 036200 Elevation Altitude above sea level for the point Longitude W79 39 133140 Calc Calculate the position by entering the distance and course offsets to the E new location See the Calculate Location Dialog Elevation 0 000000 Options gt Points gt Edit Point gt Sound ER Pathaway a ERER This section you can select a sound clip to attach to your point This sound can Info Location Sound Picture be played automatically when this point is the closest in proximity or you can Sound select the point and play the sound clip from the map popup menu a Storage Card Audio siron way Sound This is the name of the sound file Click the button to select the Flay clear e s
49. cuensuuuvenaucrenguaueneuges 57 Map PopUp MENUS ROUTE MENU aida 57 Map PODUD Men gt Other POINTS arie a a ETA awita tains 58 Map Popup Menu gt Tracking Menta a AAA 59 Dasiboara Context MenNUS dao AA A EA NA A a i 61 Dashboard tem Set Font Dialog pira 62 Dashboard Tracking INTO varas iS AAA AAA AAA 62 Dashboard ROUUNd IO riada 63 Dashboard General iO 64 Dash Oak Pace Titania AAA iia 65 CUSCOMIZINO SCC ENS espiadas rs dedicar lidades 65 TODA DUROS a loro os 67 TODA isos ooo 67 EOGIDAr Text Mentes idad 68 Toolbar Text Men tu gt DIFectonal KEYS uni E E A E A A A 69 Hard Key Assignments 4 Button DEVICES suas a aea 70 Hard Key Assigniments 2 Button DEVICES is 70 21 A RNA 71 GPS MERU teuis iira acostada lic cannes 71 SLU NCW TD ai a id A A EA 71 GPS ContiqureiDIaldd iaa 72 GPS Comiguites gt DEV ICS adan a gant eanaciab ease suaeeiaaaeeanee 72 GPS GCOntigure gt GPS Log DIO ia 73 GPS Configure gt Advanced GPS OPIO ui 74 View N DU DAOS uses 75 Map DISDIA ODUONS arier tics oes A EAT A A AAA 75 Options MeENUDIGIOGS idarra a TT A 77 OPtUoOAs gt ROUTO Sisa iii ias 77 RoOutes DiaglOG Mens A ea 78 Opti0nhs gt Rottes gt DetallSiniiin a 79 OPtuons TAC Sisa AA asa 80 TACKS Dialog MEDUS aa 80 ODON gt racks Detall aaa a a dad 81 PathAway Manual Page 3 of 4 4 Apr 07 OD ONS PONS miea sca tars paewee ena a eu cutaniee aula eine a 82 POINTS Dialog MEUS sa ASAS 83 Options gt PoMtsS gt EdIt PON Es
50. d Also the availability of these maps may not be present on future versions since this feature is for currently for experimental purposes only Cache Folder Clear Cache ly Documents Pw ebMaps Download Maps from Internet checkbox When checked PathAway will automatically connect to the internet and download map sections from the NOTE This Feature is currently For Source Map server experimental purposes only Check with the data provider for usage terms and conditions Show Cached Maps when offline checkbox When Download Maps is unchecked and Show Cached is checked then PathAway will display the any map sections stored in the cache You should clear the Cache on a regular basis to prevent the device from running out of memory E Cancel Cache Folder Specify where to store the cached portions of the map Ensure this is a unique folder since clearing the cache deletes all of the files in the cache folder Options gt Folders The Folders dialog allows you to specify the file folders that PathAway uses to femi TTA he d 3 47 look for Maps Point Route and Track databases By default PathAway uses leida x d 3 ok the following Folders 51M Documents Pathaway On first time startup PathAway enumerates the folders as follows 3 Storage CardiPathaway 1 Registers lt Personal Folder gt PathAway folder The actual name of the lt Personal Folder gt is resolved in the device registry It is usually called
51. d and the preset Average Speed Up Arrow means you re too Slow ie Speed Up Down Arrow means Too fast ie Slow Down Time Delta Time difference between your Average Speed and the preset Average Speed Up Arrow means you re too Slow ie Speed Up Down Arrow means Too fast ie Slow Down Distance Delta Distance ahead or behind of target position Target Speed This is the speed you need to travel at for the fixed distance setting in order to recover to the target Average Speed For the tutorial assume we are interested in the difference between our h current average speed and our target average speed So from the Time Delta Dashboard select Speed Delta Pace Info Distance Delta Set Font Target Speed Note after you select this option the Tic mark may remain This is because there is no data to show so it is pointless for the dashboard to obscure the screen Once you start to move the Speed Delta data will pop out of the corner of the screen Now tap and hold on another Dashboard Tic mark This time select the Target Speed option Now go out and start traveling Connect the GPS and watch the Speed Delta and Target Speed change as you move PathAway Manual Page 37 of 4 4 Apr 07 Terminology Dashboard Customizable Border around navigation map screens Contains useful travel statistics and information Dashboard items can be modified via Tap and Hold on a particular item and selecting a
52. d longitude lines respectively Use this method for the highest map accuracy Selecting this method will bring up a panel below the map Options in this panel allow you to select points on the map for use in calibration select captured points for use or enter the coordinates manually PathAway Manual Page 92 of 4 4 Apr 07 Calibrate using Nudge Controls Nudge Map Calibration controls are for making small adjustments to the maps They work best when you have a map and have recorded tracks with the GPS and or have marked a few points If the track doesn t exactly line up with a road or points are not right on the place they should be you can use the nudge controls to Line up the maps with the known points Calibrate Manually Manual calibration means simply setting the geographical longitude latitude coordinates of the map using the Map Details dialogs Calibrate by TWO known points PD PathAway First you should select the map you are going to calibrate If the map to calibrate is not visible go to the Options Maps dialog and choose the map by it s name and select Show To choose a map The screen will be changed to the Full Screen Map View You are prompted to select the first point M807 10 49 eee Mark first known pont TE Se 04828285050 Bl Scroll the map to a position of Known coordinates I e your home Click on the ae PathAway fe d 3 11 x map the location where the point SHOULD be This brings up the Points list Se
53. d new points a Database Select the point database to edit Choose Edit Databases to add or modify entire Point databases Find Searches for the next occurrence of the entered point name New Create a new point Will launch the Point Edit Dialog sik i Up Down Arrows Moves the selected point up or down in the list Relevant Brackenridge Rd only if the database is a Route or track database de Brandy Lk Cottages a Cedarwood Cottages Add to Route Adds the selected point to the active route Chaplain Is W Close Closes the current dialog and returns to the previous dialog New Show Shows the selected point on the navigation screen Add From Add points to current database from another point databases A new list is displayed Choose the point to add and press OK A EST ok 9 3 mi 4 04 mi 3 592 mi 2 51 mi 2089 ft 6 16 mi Edit For modifying the details of the selected point such as name geographical coordinates description and icon Launches the Point Edit Dialog PathAway Manual Page 82 of 4 4 Apr 07 Points Dialog Menus Name Description Point New Creates a new point Edit Point Modify selected point details Delete Deletes the selected point Beam Beam entire point to another handheld device Move To Move entire point database to and from expansion card Send to GPS Send selected point or entire point database to Garmin GPS device Get from GPS Download po
54. dd Route Pt Adds selected location to the route Shown when there is an Active Route and location not on route Edit Route Point selected Adds the selected location to the route and flags it as a Add Turn Instruction Turn point Note the Intersection icon is the indicator of a Turn Shown when there is an Active Route and location not on route Removes the specific point selected from the active route Point remains in point database if there already Follow Forward Activate the selected Route to follow from the start Delete fm Route Route Point selected Activate the selected Route to follow in reverse order starting at end point of the route Follow Reverse Calculates the area bounded by the active route The last point will be connected to the first point via straight Shown when a route is being line Note the calculation will be incorrect if the track followed lines intersect at any point New Route Create a new route Brings up the New Route dialog Go to the Routes dialog to choose other Routes Same as selecting the main menu Options Routes Calculate Area Routes r I Ti L S Pathaway Er iaa amp A at 4 E bon l A Ja 4 os oe j i jee i 1 Sn ir i mn Pd A s a I Fe a a i ls moe Tj 5 1 o A 1 T Map Popup Menu gt Other Points gt Se ogaao Bl Name Description Action Displays a screen showing detailed information about the location such as
55. dinates relative to the pixel image of the map PathAway Manual Page 88 of 4 4 Apr 07 1 Calibration Type r a PathAway a ee a 3 32 ok mr I Lu PathAway allows the map to be defined by 4 different types Top Left Bottom Right Top Left Bottom Right Top Left Botborm Right Known Points Projection 3x3 Point Touratech QV es Top Left Bottom Right The Top Left Bottom Right coordinate system is a simple rectangular map shape All longitude lines are perfectly vertical and all latitude lines are perfectly horizontal This type of map is accurate enough for maps of small areas where the curvature of the earth is insignificant PathAway will also run much faster with this system since no complex math is required to determine plot points on the map To calibrate maps of this type you need to know only the top left and bottom right longitude and latitude coordinates of the map See Entering Longitude Latitude coordinates for specifying the top left and Top Left Bottom Right bottom right coordinates of the map Lat M45 22 65087 Lat N44 05 76064 You can also calibrate the map right in PathAway using the locations of two or Long W850 21 64395 Longi W77 56 3339 more known points See the section on Calibrating Maps Cancel Database Options Maps E PathAway Manual Page 89 of 4 4 Apr 07 Projection The Projection type of map employs maps defined using specific named Tra La ae projections such as Lambert
56. e Radials minutes PathAway can display the estimated travel time graphically on the map via special range radials set a specific minutes Each ring shows the estimated time to reach a certain portion of the map Ie If the first setting is set to 1 minutes then there will be a ring shown on the AA map indicating where you will be in one minute To adjust the time radials EJ Cancel enter the minutes for each radial separated by a comma Note Turn the radials on off in the View gt Map Display dialog Local time offset Add or subtract time extracted from GPS Greenwich mean time GPS calculates Speed Course When On use the speed reported by the GPS device as the current speed and course When off PathAway will calculate the current speed and course This option is provide because some GPS devices report course and or speed incorrectly Set Clock to GPS Time When connected to the GPS the device system time is compared to the time reported from the GPS If the device system time is out by more than a minute then the internal system clock is changed to match the GPS time Options gt Preferences gt Map See View gt View Map Display PathAway Manual Page 100 of 4 4 Apr 07 Options gt Preferences gt Tracking Set track recording preferences Allows you to Control how often position data is logged to the Active Track Database log Record Track History Saves recorded GPS location to a logging database while connected Trac
57. e file to import The file will be converted and imported into the PathAway Database List Exports the selected file to PathAway comma delimited format Brings up a file selector dialog that allows you to select the file to export to For tracks the default extension is pwtrk Routes is pwrte Points is pwpts Note do not export to a folder where PathAway has a registered folder A PathAway delimited file in these folders will be automatically imported when the program starts up No sorting Sorts by name Sorts by creation date Sorts by selected transportation mode name Sorts in order of closest proximity to current location Launches Track preferences dialog Options gt Tracks gt Details PathAway Manual Page 81 of 4 4 Apr 07 For modifying the details of the route such as name transportation mode and io PathAway individual points j Name Name of Track e 29 23 ok Bracebridge to Port Carling Add Points Add points to track Launches the Point Record Editor l Transportation Edit Points Modify the points in the track Add new points delete points or change order Launches the Point Record Management dialog Mode of Transportation Select the transportation mode from the list Icons can be created using PathAway Icon Manager Options gt Points Lists all points Points may be stored in multiple databases Select a point to i y PathAway I a Goto on the map edit point information delete ad
58. e remote will be shown in the corner of the screen in the general direction of the remote Note You can tap and hold on the label and select Show on Map from the menu to center the map on the screen Show Line to Remote This option will draw a line from the current location to the location of each remote The lines will be drawn in the color of the background of each remote TL z 3 Remote gt Remote Settings gt Auto Center Dialog Pi qe 3 12 10 Dk Retrieve Loc Map Auto Center 4 gt Control the automatic cycling the map view to show the location of each Remote Automatically Center Remotes i Auto Cycling Interval every Automatically Center Remotes Turn on this option to have the map view show each remote location one at a time This option is only active while Every seconds disconnected from the GPS Auto Cycling Interval every x seconds Eg Cancel Entering Location Coordinates Location coordinates are the values used to represent an exact location on earth These are defined in a number of ways The most universal is via longitude and latitude Other coordinate systems include UTM and USGB You can setup your default location coordinates in the Preferences gt Coords Dialog Entering Longitude Latitude Coordinates The geographical coordinates are specified as the vertical distance from the equator known as latitude and horizontal distance from the Central meridian over Greenwich England known as lon
59. e remotes are being tracked there is always one remote Goto Active Remote that is the Active remote This option will center on the remote that is currently active Center the map on the next remote This remote then becomes the Goto Next Remote Active Remote Center the map on the previous remote This remote then becomes the Goto Previous Remote i Active Remote Auto Center Remotes Cycles centering the map on each remote at a pre defined time interval Enable Remote Tracking Enables or disables the automatic remote send retrieve PathAway Manual Page 49 of 4 4 Apr 07 Options Menu PathAway es 21 35 X y 1 a j Points Routes Tracks Maps Web Maps Options Point Databases Remote Folders Screens View Preferences GPS Calibrate Map zje About PathAway ga Points Management of Points Shows list of points Options to Create new points delete edit ES individual points Sort find and go to selected points on map Beam points to others Management of Routes Shows list of routes Options to Create new routes rename Routes delete edit route points duplicate join 2 routes together Beam route to others Select a route to display on the map Management of Tracks Shows list of recorded tracks Options to rename delete edit Tracks track points duplicate join 2 tracks together Beam tracks to others Select a track to display on the map E Management
60. eading Show Speed Show Recorded Time Show Distance To Remote Show Course To Remote OOUR E Show Elevation to Remote Show Off Map Remotes Show Line to Remote E Cancel Most likely you will be retrieving locations for more than one remote To do this via SMS is automatic since other remotes will SMS you their location with their Remote ID and PathAway will add them to the list of remotes and display them on the map For viewing Server based multiple remotes you will need to setup an account with the Tracking service PathAway has a simple remote tracking server that you can setup at http pathaway com locmanager Other PathAway Manual Page 34 of 4 4 Apr 07 Supported services are as follows Touratech http www ttqv com TrakGPS http trakGPS com PathAway outputs some standard location sentences as well so check with your tracking service for the format they require If the format is not compatible please contact us The PathAway format is posted on our website for any tracking service that desires to support PathAway format To view an example of multiple remotes go back into the main menu and choose the Remote gt Remote Settings option Then select the Retrieve Loc option Click on the Settings button The Location Format Settings set the Address as http pathaway com cgi bin locman cai Set the Format to PathAway then select the button Set the Account name to Loc
61. eculate Location Dialog aia AA AAA AS 110 Find Location By Address DIO a a aaa 110 Find Location gt Address Results Dialogo 111 Find Location gt FInisSm DIO aia AA AAA 111 GOtO gt W 0FA VIS Wisin a 112 Remotes gt Send My Location Dialog ani 112 Remote gt Remote Settings gt Send Loc Dialog sssssssssssesssesesesssserererosnsnssnsnsnonnnnnsnenesessene 113 Remote gt Remote Settings gt Send Loc gt Send Format Settings Dialog occcccccccccnncnncncc no 114 PathAway Manual Page 4 of 4 4 Apr 07 Remote gt Remote Settings gt Retrieve LOC Dialog cc ccc cc ccceeeeesenerescuetessucueenuctenaueueneueusegas 114 ReLHeVe Senno DIOSA A wad Sunes 115 Remote gt Reimote Locations Dialogi iii AAA A 115 METRO sairi cel atce cenit enenens a a a nee eid eee econ edhe nalg ee eee eee 115 Remote gt Remote Locations gt Edit Remote Item cccccccccssccsseeeeeeeeeeecessneeteeeeenteeggnanertes 116 Remote gt Remote Settings gt Map Display Dialog c cccccccccccccccnncnccnnnnnnn nr 116 Remote gt Remote Settings gt Auto Center Dialog ssssssssssssssssssrsresssnssssnsnenenenenenssrerene 117 Entering Location COOrdINGteS arista IAE 117 Entering Longltude Latitude Coordinates naaa adi 117 Entering UTMERCOO Fa IM atestado a 118 ENterina OS6GB COOFAIMALES arsenal A 118 PathAway TOO Sisa US 120 LASEN AAA 120 MEU ls e OOO O 120 CON Manager in E A AA 121 PathAway Manual Page 5 of 4 4 Apr 07 Installation P
62. ed them into PathAway using PathAway Tools Map Manager You can acquire maps from online web mapping sites or you can scan your own from paper maps use digital pictures or get maps from CD ROM Note In order to use maps with a GPS you need to calibrate them to their proper geographic longitude latitude coordinates This can be done in map manger by specifying the top left and bottom right coordinates of the map or in PathAway using positions of known points Refer to Calibrating Maps for more information Once calibrated PathAway will center the map to your current location As you move the map is re centered to show your position If you are recording your track you ll see a blue or dark gray line showing your line of travel Recording Tracks You can record tracks for later use or to see where you ve been This is especially helpful in case you start going in circles Tracking databases can get quite large especially if you are capturing Dae PathAway a 2 9 12 ok constantly This can slow screen refreshing down and consume a large amount haa of memory The Preferences section under Tracks has some options for General Tracking ala 4 e controlling track database size and recording precision A good detailed track 4 iG for traveling between 30 and 60 mph is to set the precision to record position M Record Track History every 10 seconds To keep individual track database sizes down you can select Track Data size Unlimited
63. eference Baud Rate The Baud rate is the speed in bits per second which data is transferred from the GPS device Some devices have a fixed baud rate others can be selected on the GPS device itself Ensure that your baud rate on your GPS matches the selected baud rate here Check your GPS device manual for information on proper baud rate settings PathAway Manual Page 72 of 4 4 Apr 07 Note The most common baud rate for most GPS devices is 4800 BPS Next is 9600 followed by 57 600 Connect Begins communicating with GPS device If communications are working properly you should see a stream of GPS information on the screen When a FIX of your current position has been determined then the current longitude and latitude position will be displayed along with type of fix number of satellites used for the fix and total number of satellites in view GPS Configure gt GPS Log Dialog This section is used for debugging GPS communications Record GPS Data to Log File Checking this flag will record the GPS communications stream to a log file Settings button Control the type and amount of data that gets recorded to the log file Erase Log File button Clears the log file of all existing data Max File Size Sets the file size limit of the log file Once this size has been exceeded no further data will be recorded to it Enter O for an unlimited file size Note Unlimited will record until the system is out of memory so it is reco
64. eight r Calibrate manually ES PathAway ra taaz ok Set the geographical longitude latitude coordinates projection type and datum of the map See Map Details for more information Bottom Right Lat M44 05 76064 Long 450 21 64395 Longi W77 56 3339 Database Options Maps E PathAway Manual Page 95 of 4 4 Apr 07 Options gt Point Databases Lists of your points databases Choose a point database to make the active HF PathAway e d ase ok I L database for which new points will be added to Manage point databases by duplicating or joining databases move to and from 418 a ones expansion cards beam to others and transfer between Garmin GPS devices New Create a new Point database Edit Points Edit points in the Points Record Dialog Close Returns to the current navigation screen Details Allows editing of the point name Ol Canada Ontario towns Ol Default _Points Ol My Points Bl Points 04 06 03 14 50 Ol Test_Points Edit Points Point Database Dialog Menus Name New Edit Points Duplicate Join Delete Beam Move To Send to GPS Get from GPS Import Export PathAway Manual Description Creates a new point database Edit points in the Points Record Dialog Duplicates the selected database Select a point database Select the Join menu command It will go back to the Point database screen Then you select the datab
65. en the value falls below the specified threshold Speed Precision When your speed drops below 10 nm per hr PathAway will Ok Cancel increase the number of decimal units used to display speed Adjust this value par to increase or decrease the number of decimal places used for these ES a o ti al a El E E thresholds PathAway Manual Page 107 of 4 4 Apr 07 Options gt Preferences gt Hard Keys The Hard keys dialog allows you to control the function of the hard keys on the device Select the preferences category Hard Keys to activate this dialog Enable Hard Buttons Check this item to enable the hard buttons Unchecking this button will disable the hard buttons completely Note that disabling the hard keys will make them inoperational while PathAway is the active application The default System settings will not be executed To set the hard buttons to execute the default system setting select the individual button number and choose System Setting from the drop down Enable Directional Buttons Check this item to enable the hard navigation buttons to operate map zooming in and out Unchecking this button will disable the directional buttons PathAway Manual Page 108 of 4 r Pathway P ef E ok T I L Point Colors and Lines Hard Keys 4 gt Hard Buttons Enable Hard Buttons 1 4dd Point 2 Next Screen J Databases Toggle GPS Directional Buttons Enable Directional Buttons Sp sgan
66. ence menu Default Tracks 111 and select the Time section Under the heading Time estimates based on Ol e turn the check box on entitled Recorded Track Speed You ll see your time w TRACK 04 05 2 6 remaining in the Route view screen This is the actual time it took you when e Track 04 06 05 16 39 1397 you recorded the track This includes any stops along the way Database Options Sections 9 PathAway A EE ok Remote Tracking PathAway PRO provides the ability to send locations to others so they can see where you are Others can view your location directly on their handheld or via Web server You can also setup your handheld to retrieve the locations of others This feature is very useful for applications such as group travel where you need to see where others in the group are search and rescue where searches need to pinpoint the victims location or view the positions of other rescuers asset and vehicle tracking or any other purpose where locations of others are important Since PathAway can also post your location to an http tracking service Web based Location Monitoring servers can track locations of PathAway handhelds We provide a web service to test and view locations sent from and to PathAway There are two methods for sending and retrieving locations SMS Simple Messaging Service or HTTP Both methods require that you have a wireless data handheld SMS communications requires that the device support Microsoft MAPI Mail ser
67. er devices via SMS Remote Tracking Remote tracking refers to monitoring the position of others PathAway can act as a Remote Tracking Monitor by configuring it to retrieve locations from a Remote Tracking Server or receive locations directly from other devices via SMS Routes Routes can be created by linking points together in a sequence When following a route the distance to next point and time and distance to destination are displayed Also the distance and direction off of the route is shown Travel Transportation Mode Define your mode of transportation for easy searching for routes and tracks Time Estimates can be made by the default vehicle speed or a custom speed you choose Vehicles are currently defined PC side Tracks Tracks can be created by recording GPS movement These tracks can then be Followed to perform as an accurate guide for the travel PathAway Manual Page 39 of 4 4 Apr 07 Reference Navigation Screens The main screens of the program are the navigation screens used for displaying maps and other travel and location information The screens are all composed of a map viewing area surrounded by a customizable dashboard The dashboard can also be completely removed from the view in the Screen menu There are a number of different screens available for targeted use They are shown as follows Full Screen Map View Utilizes most of the screen to show as large a map area as possible Long Lat
68. er it s location at the start of the map i lt a Now to see the location at the start of the route choose the menu Goto Start pts wh ade 4 34 ES EA L You should see a red line on the map at Footes Bay That is your route line A route is a series of points connected together indicating a travel route When navigating you ll follow this route to get to your destination Note if you don t see a map on the screen then press the Map Zoom In or out buttons If these buttons are yellow then it means there is a map available to zoom to You should see a map similar to the screenshot Br 898058 Br Simulating Navigation PathAway provides a nifty feature to animate your route before actually traveling Under the GPS menu Select Simulate The travel simulation has begun The simulator works just as if you are actually traveling In fact if you re following a recorded track the simulator will display the actual speed and time See Following Tracks later on in this section Watch the simulator until it stops at your destination the town of Rosseau Note When you re actually connected to a GPS you ll see a blue line indicating your line of travel This is your recorded track Each dot on the line represents a recorded point Try running the simulator with the different views Each view shows you a different set of interesting information See Screen Views for details PathAway Manual Page 21 of 4 4 Apr 07 Scrollin
69. erences gt Coords PathAway Manual Page 62 of 4 4 Apr 07 North Arrow Displays a compass showing N S W E and a North Arrow Trip Dist odo Distance traveled since start of Trip first GPS fix Elapsed Time Elapsed time in minutes since start of Trip first GPS fix Average Speed Average speed since start of trip Max Speed Maximum speed obtained Vert Speed Displays the vertical rate of climb or descent Proximity Displays the proximity information to the closest point Dashboard Routing Info e ie hd an ih 9 dig PathAwa Off Track Warning Displays information regarding the current Route being followed These vin_ Elevation Warning items are only valid if following a route ft Time to Dest ete Arrival Time feta Dist to Dest dtd Heading Direct to Dest Dist Direct to Dest Follow Heading Dist to Next Point Time to Next Point Yert Dist to Next Yert Angle to Next Heading on Next Leg Dist of Mext Leg Time on Next Leg Turn Instructions Time to Turn Off Track Warning Displays distance and position off the route track Elevation Warning Displays distance and position from the elevation recorded at the current route position in the active route database Time to Dest ete Estimated amount of time to reach destination Arrival Time eta Estimated time of Arrival at destination Dist to Dest dtd Distance to destination along route Heading Direct to Dest Displays the heading direct to the route destination point
70. g Maps FF Pathaway er d 4 26 Maps in PathAway can be larger than the screen so scrolling maps is ray E important Besides scrolling automatically as you move maps can be scrolled RO EN using your stylus in 2 ways Se ce when you ve reached the position you would like to view 2 Tapping and holding on the edges of the map will scroll the map towards the Fe edge tapped on Try it out See if you can find the Joseph River on the map Scroll the map by f following the red route line Tip To quickly go to the start or end of your route go to the Goto menu and select Goto Start of Route or Goto End of Route gt Oo fe Changing Map Views There are two different ways to change the view of the map L By zooming in or out of different maps or 2 By scaling the current map I e Expanding or Shrinking the current map 1 Zooming Between Maps You can install as many different maps as you like into PathAway PathAway will organize and layer the maps depending on the scale and geographic coordinates of the map Think of the maps as if they are organized from above the surface of the earth When you are up very high you see a wider area Moving closer or down you see less area and more detail So Map Zoom In or moves you closer and Map Zoom out E moves you further away When you have two or more maps within the same geographic location that you are centered on you can switch in and out of these maps in one of the fo
71. get before Off track warning is triggered O a Elevation Warning Defines vertical distance of track route you can get Ht Threshold 0 0115 nm before Elevation too low too high warning is triggered Route being followed Route Warnings must contain Elevation information Route Navigation Follow Routes in Sequence Route Navigation _ Route Pt Proximity Radius Follow Routes in Sequence By Default PathAway targets the Next Route Manual Route Advance Only point by determining the closest route point in the direction of travel This might not be the most desirable method for navigation since some routes my crisscross or loop back Or perhaps the route requires a grid pattern to be run In this case the Follow Routes in Sequence can force PathAway to Target only the Next Point after the current target point when it reaches amp A Q ti S a E E E the Route Pt Proximity Radius Route Pt Proximity Radius This specifies the criteria for determining when a Route point target has been reached The wider the radius setting the sooner the PathAway will move onto the next route point target Manual Route Advance Only In certain cases it may be required that the Route target point be advanced manually If Manual Route advance is enabled then PathAway will stay fixed on the target route point until you specify Advance Route Target Point PathAway Manual Page 103 of 4 4 Apr 07 GF PathAway e EER ERR ok M I L Options
72. gitude These coordinates are entered in one of these available formats Hemisphere Coordinates Latitude coordinates north of the equator are prefixed by N or a positive number Coordinates in the southern hemisphere are prefixed by S or negative numbers Examples Hemisphere Degrees minutes N45 30 500 W79 30 500 PathAway Manual Page 117 of 4 4 Apr 07 must be a space between degrees and minutes no space between hemisphere and degrees Hemisphere Degrees minutes seconds N45 30 30 0 W79 30 30 must be a space between degrees minutes and seconds no space between hemisphere and degrees Decimal degrees 45 505 79 505 or N45 505 W79 505 Latitude positive values specify Northern Hemisphere Longitude positive values specify Eastern Hemisphere no space between hemisphere and degrees Entering UTM Coordinates Universal Transverse Mercator UTM coordinates define two dimensional horizontal positions The sixty UTM zone numbers designate 6 degree wide longitudinal strips extending from 80 degrees South latitude to 84 degrees North latitude UTM zone characters are letters which designate 8 degree zones extending north and south from the equator Beginning at 80 south and proceeding northward twenty bands are lettered C through X omitting I and O These bands are all 8 wide except for bond X which is 12 wide between 72 84 N There are some zones that are of different size See the Map Projections ma
73. gt Preferences gt Points Tracking Alarm Route Point col 4 gt Preferences related to the display of points and naming of new points In proximity radius 1506145 mi Auto Point Maming In Proximity when within Defines the radius to search for points to display in proximity list Auto Point Naming Define how new points are auto named Points can be automatically named by Starting Number ors geographical coordinate or be incrementing numeric ids Point view width Point View Width Set the map display range threshold for when to display Icons 110 52 mi the icons and text labels When zoomed out to a range higher than these Text Label 10 52 settings the icons will be shown only as dots and the text will not be displayed Note the icons and text can be turned on and off completely in the View gt Map Display dialog Options gt Preferences gt Colors amp Lines The Colors and Lines dialog allows you to to improve the visibility of the pF PathAway ae Z 9 14 ok navigation displays on the map Select the preferences category Color and Lines to activate this dialog Here you can change the way the lines and colors Route Point Colors and Lines Han 4 gt on the maps are displayed If you have a color device you can create easy to read contrast between your maps and route and track lines Experiment with Active Route Other Routes this option until you ve found a view that suits
74. ha sy T Eg 4 03 pops up with some options Select Add Point _ i as Info Location Sound Picture Tip You can also add a point to the map by pressing hard key 1 Press the key again to save the point and exit the Edit Point dialog This is a quick way to capture a point as you travel You can go back to the point later to enter its Lake Joe Club Rd other details Icon One of the coolest features of PathAway is that you can use your own icons to s display your points on the map In the Edit Point dialog select the Icon Popup You ll be shown a list of available icons available to attach to a point If Mate you installed the tcons prc database an extensive list of icons will be displayed For the marina choose the Gas Station W icon Mame Default Points Tip Check out PathAway Tools Icon Manager for creating your own icons Database PathAway Manual Page 26 of 4 4 Apr 07 Creating Routes To create a new route go to the Options Route dialog and select New You will be presented with a dialog for naming the route and setting the mode of transportation Select your vehicle for the route For this tutorial select the Boat icon To add points to your route select the Edit Points button This brings up an empty list of points Choose Add Select Footes Bay Marina as your starting 2 point Press OK Select Add again Select Rosseau and OK Now you have a basic Point A to B route Lets go with it and
75. i 4 11 53 x as follows Svid Satellite Vehicle ID This is the identifier number for the satellite 255 undefined SNR Signal to noise ratio in Db Hz 1 if no signal Elevation Elevation in nautical miles above mean sea level Azim Azimuth in Degrees relative to TRUE Magnetic North E Ephermis valid 1 yes 0 no D Differential Fix 1 yes O no U Satellite is Used in determining location 1 yes 0 no R Satellite is Signal Strength is Rising 1 yes O no 4 0942 0 BP Remote Tracking View Shows the map and list of Remotes Remotes are listed showing distance and heading to Tap and hold on an item to bring up the context menu for commands to issue on the remote item Remote locations are locations sent to the device via SMS or from the Remote gt Retrieve Locations command See the tutorial section on Remote Tracking for more information 1 518mi 1 011mi Michael J 1 256rni sue G Container 102 Sp gaan Tip You can also traverse through the screens by pressing hard key 2 5 PathAway Manual Page 44 of 4 4 Apr 07 Navigating without Maps PathAway works with or without maps When used without maps PathAway will display all points in a virtual Longitude and Latitude world You can Zoom In and out to increase and decrease the Scale factor of your view If you have points routes or Tracks defined PathAway will display them on the screens GPS connectivity works well with or without maps When the zoo
76. ices Choose your type of GPS device or specify it s communications Not Connected Fix O views O protocol NMEA is the most common protocol for serial communications in use today comica Seur NMEA stands for National Marine Electronics Association PathAway supports version 2 0 or higher of NMEA 0183 Check your device for specifications on interfacing with other devices Some devices have multiple interfaces that can be set Ensure that NMEA is set as the active communications interface Port Choose the port your GPS is connected to Most common connection via cable is COM1 This is the same port you attach a cable or cradle to sync your handheld with your PC For Bluetooth GPS devices the COM port number varies across different Handheld devices Most will display the name Bluetooth beside the COM port number associated with it See our FAQs on the PathAway forum for the most up to date information on specific GPS device configurations For information on how to configure cables to connect your GPS device to your PDA see the links in the GPS Sites page Cancel Auto Detect If you re unsure of the specific Port and Baud rate select Auto Detect then press the Connect button This will cycle through all of the ports and baud rates available and attempt to connect to a GPS stream based on the selected protocol Once a match is found the auto detect will display the settings being used You should note these settings for future r
77. icon 5 then choosing the menu Options and select Maps This will show you all of the maps installed on your device If no maps are listed then they have not been installed In this case you ll need to go back and reinstall the application Screen Views The first screen you see is the Full Screen Map View PathAway has many different views To see the different views select PathAway s menu bar You bring up the main menu by tapping the main menu toolbar button 5 Choose the Screens menu Now choose one of the screen views listed Here is an overview the different screen views PathAway Manual Page 14 of 4 4 Apr 07 Full Screen Map View ira E ae Tre Patha T 24 x Utilizes most of the screen to show as large a map area as possible Long Lat ms Ai x 45 speed elevation and direction of travel are displayed This data is the navigation data in the program In this view by default the dashboard shows as follows Upper left Elevation Upper Middle Course Upper Right Speed Bottom Left Location overlaid by Proximity and Alarm information Bottom Center Current Time Bottom Right Map Range Tracking View Shows the map and navigation data Default travel stats are related to information specific to your current trip Default settings are Upper Left Elevation Upper Middle Course Upper Right and down current average and maximum speed Left side trip time and distance odometer SA FAARAO EA P
78. ints directly from a Garmin GPS device Options New Database Create a new Points database Edit Databases Edit point database list Add from other Add points from other database to current database Database Split Database Split database at current record Sort by Name Sort by point name Sort by Proximity Sort points in order of closest location to current location Sort by Icon Sort by selected point icon name Database Details Edit Database name and details Preferences Launch Preferences PathAway Manual Page 83 of 4 4 Apr 07 Options gt Points gt Edit Point Edit point name geographic location description and choose an icon to represent the point on the map This dialog is divided into sections Info and Location The point Info section is for specifying information on the description of the point The Location section holds the actual geographic location data for the point Options gt Points gt Edit Point gt Info Name Name for the point Maximum length is 79 characters All characters except commas and quotes are valid Note Describe the point Maximum length is 4000 characters Show on Map Center the map on the current point Add to Route Add point to current route Point Icon Drop down list Apply your own custom made icons to your points See Icon Manager for details on how to import your own points PathAway Manual Page 84 of 4 PathAway T gr ian ok Info Location Sound Pi
79. ion screen Pathaway GPS 3 Moving Map GPS Navigation Copyright 2001 04 MuskokaTech Email Web Registered Registration key Owner name Kenneth LID 37000E E i If you have purchased then this is where you enter your Registration key to unlock the full unlimited application Once you have entered your key press the Register button to unlock the program for full unlimited use If you wish to continue running the trial and there is still time remaining on the trial then simply press the Try it button To exit the program immediately press Cancel Also on this screen is important information you may need to refer to if you are looking for help or where to purchase the application Program Version The version number is listed under the PathAway logo If contacting PathAway Support you will need to specific this version number Email Email address for support questions Web Web site for information support purchasing and obtaining updates Registration key When you purchase you are given a registration key which is encoded to your HotSync User name Enter this key into this field and press Register to unlock full functionality of the program PathAway Manual Page 11 of 4 4 Apr 07 Owner Name The registered Owner name on the device You may be required to provide this name for purchasing the
80. istance Enter the required arrival time and distance to travel PathAway will calculate speed required to travel at as you move Distance can be a fixed distance or a distance determined by the current route being followed Current Route Keep Pace against the current route being followed Note this route must have timing information stored such as in a previously recorded track log Correction Distance Correction distance is used to calcumate the Target Speed you should travel for a specified distance in order to catch up to the target time For example if you set the correction distance to 5 km then the target speed will show the speed you need to travel at in order to catch up or fall back into the target pace you have set Target Speed display option is set from the Dashboard gt Pace menu Advanced Displays the Advanced Pace settings PathAway Manual Page 106 of 4 4 Apr 07 Options gt Preferences gt Pace gt Advanced F Pathaway Ek 1 74 ok Advanced options for Pace Fixed Start time Fixed Start Time Setting a fixed start time will delay any tracking until the HH MM SS exact start time is met This feature is useful for activities such as rally races where the start time is fixed Snap Position To Route Disconnect GPS at Finish Snap Position to Route Instead of calculating distance by exact GPS position the position is calculated by the closest point on the route This feature is useful for races that
81. k As of PathAway 3 you can now expand or shrink your maps on the view screen to show a wider area or to get close to a location while still rendering a view of the map This operation is recommended for Handhelds with higher processing power and internal memory but is available for all devices To scale maps use one of the following methods o select the A or an buttons or e selecting an area of the map Choose Map Menu gt from the Popup menu and select Zoom Scale In or Zoom Scale Out When you zoom in all of the map pixels are expanded to show you a closer look at the area When you zoom out you will see a wider view of the map To return to the original map pixels select the Scale 100 icon a on the tool bar or select the Popup menu gt Map Menu gt Scale 100 PathAway Manual Page 23 of 4 4 Apr 07 F HJ PathAway grion ok l l LS Improving Visibility of Navigation Lines You can increase the visibility of navigation data on the map screen This is General Coordinates Time Map ID done by adjusting the size and color of route and track lines or by selecting Dist Elevation a larger or a different style of position marker To do this choose the SAE cau Options Preferences menu and select the preferences category Color Stat Miles and Lines Course Volume Mew Trip on Startup Stay on when Connected Sp Igazan El In the Colors amp Lines preferences you can change the way the lines a
82. k Data Size Control how large the track file can get Record By Time Record track log point at time intervals Set to Constant to record as often as the communications speed and device performance will allow Record on Course Change only Will only record track points if the time precision has passed and a course change has occurred since the last track was recorded Record While Moving only Will only record track points if the time precision has passed and have traveled the specified distance since the last track was recorded Record By Distance ay Pathaway as e EA ok General Time Map Tracking alal 4 gt Record Track History Track Data size Unlimited E Record by Time I L every Record on Course Change only Record while Moving only every DODODOO FE 0 Record by Distance every 0 0000000 mi Record track log point at distance intervals PathAway will record a track point at specified distance traveled markers Options gt Preferences gt Alarm Have audible alarms sound when you reach points of interest or get off your route track Set the distance threshold for the proximity point and choose from one of the predefined alarm sounds All Alarms Enable Disable alarms Off Track Warning Set the Off Track warning alarm distance and sound This alarm will sound when you veer from the specified track by the off track distance The Off track alarm will continue to sound every 30 seconds whi
83. k the log file in your My Documents PathAway folder It is entitled PathAwaySendLog txt This log file contains a dump of the data being sent i o Remote gt Remote Settings gt Send Loc Dialog Pi ek 225 ok Send Loc Retrieve Loc Map Autd You can configure PathAway to send your location manually via Send My Send Addresses seperate by Location command or automatically on certain intervals This dialog allows 77 you to setup the automatic location send intervals http pathaway com cgi binflacpost cq There are two methods for sending location SMS Simple Messaging Format Service or HTTP To Send your location ensure you have a Wireless data Pathaway ll ea connection and connect your GPS and acquire a fix of your current location Frequency o l Automatic Time Interval le Send Addresses This is the addresses to send the location to For SMS enter the cellular phone number of the recipient Every 10 00 minutes For Http enter the Web URL of the recipient server Example http pathaway com cgi bin locpost cgi This will perform an HTTP GET so cade request to the web server To send via HTTP Post enter the word POST in pe pee po front of the http URL Example POST http pathaway com cgi bin locpost cai Caution Do not enter any variable parameters on this line ie http url com x y etc Note You can send to multiple locations by separating each address with a E semi colon y
84. la the menu option End Trip This will save the track and start a new one E aca lea Screen refreshes will only draw the current recorded track every Record on Course Change only Record while Moving only every DODODOO FE Alternatively you can set the tracking to record at certain distances This will create a track record when you reach a certain distance Therefore all track points will be of equal distance apart regardless of your speed E Record by Distance every 0 0000000 mi PathAway Manual Page 28 of 4 4 Apr 07 Following Recorded Tracks Once you re recorded a journey you can now use the track to follow This is an extremely useful feature for finding your way home To choose a track to follow select the Options Tracks menu The tracks are automatically named using the date and time they are created You can change the name for your track and indicate the method of transportation by pressing the Details button Select the track you ve just recorded Press Follow reverse This will set activate the track to be followed in the reverse order it M Track 04 07 26 19 49 191 was recorded in You will see the red route line on the map You can now use ACTIVE LOG this track in the same way you would a route wg Bb to Otter Lake 0 403 E BB To 2 You can get additional information when following a recorded track To get the M8 Bracebridge to Po 92 recorded track time as your ETA data go to the Options Prefer
85. labels for the remotes can contain a lot of information about the remote Pathway i225 k This section allows you to control how and what displayed on the map 3 s screen Send Loc Retrieve Loc Map autd 4 gt Show Remote Locations Show or Hide all active Remote Ids Map Display Show Remote Locations Show Mame Show Elevation Show Heading Show Speed Show Recorded Time Show Distance To Remote Show Course To Remote Show Recorded Time Show the date and time which the location was Show Elevation to Remote received Note if the location was received on the current day then the date Show off Map Remotes will not be shown _ Show Line to Remote Show Distance to Remote Show the distance from the current location to the remote s location Show Name Show the name or label of the remote If the Label is empty then the Remote ID will be shown Show Elevation Display the elevation above sea level of the remote Show Heading Display the direction the remote is traveling in Show Speed Show the speed the remote is moving OOUR E Show Course to Remote Show the directional heading from the current E Cancel position to the remote Show Elevation to Remote Show the amount of above or below the current elevation Note 123 means remote is above the current location 1231 means remote is below PathAway Manual Page 116 of 4 4 Apr 07 Show Off Map Remotes If this option is turned on then the label of th
86. le off track Off Track Left Right Sound different alarms to indicate whether you are left or right of the track Setting these checkboxes override the default off track sound Proximity Approaching and Reached Proximity alarms can be set to alert you at two separate proximity distances Different sounds can be set to notify you of when you are approaching points PathAway Manual Page 101 of 4 F PathAway e 7 57 ok Time Map Tracking Alarms Roul 4 gt All Alarms namne id OFF Track Warning OFF Track Left OFF Track Right Proximity Notifications Proximity to Point 4pproaching Proximity to Point Reached Turn Instructions Turn Instruction 4pproaching Turn Left Turn Right Turn Instruction Reached Cancel 4 Apr 07 Turn Instruction Approaching and Reached Turn instructions can be created by setting a route point to be an Intersection by editing the route point and setting the Icon as the Intersection Icon The Turn alarm settings will sound as you approach turns Note turns are set by selecting Add Turn Instruction when adding routes or by editing a Route point and selecting the Intersection icon for the route point Turn Left Right Sound different alarms to indicate a left or right turn Setting these checkboxes override the default turn instruction sound Altitude Warning Defines vertical distance of track route you can get before Elevation too low or too high warning is trigge
87. lect the point that should be displayed at the selected location Press OK Mark second known pont f gt Sa GRAGAD E PathAway Manual Page 93 of 4 4 Apr 07 Do the same for the second point It is best to try to pick two points that are i Hg o 2 6 07 ok as far away as possible This gives the map calibrator more data to perform the adjustments When you select the second point the Points dialog appears prompting for the name of the known location Choose this point and press OK This will perform the map calibration The Map Details dialog will be displayed showing the new top left and bottom right coordinates of the map da Convention ctr 106 mi Cooper Ft a8 mi To accept the changes press OK Your known points should be displayed on thel IEEE 1i mi map in their correct locations d Enticos Restaurant Fairylands 5 To ensure that the two points you will use are correct physically go to the e Foreman Rd point and capture the exact coordinates of each point from the GPS I e Point 1 Corner Store Point 2 Home If this is not possible try to determine the coordinates from a paper map or pinpoint them on an electronic map on the Web I e Mapquest Select the Options Calibrate Map menu options The screen will be changed to the Full Screen Map View You are prompted to select the first point Scroll the map to a position of known coordinates I e Corner store Database Options Sort Click on the map the l
88. les hr You can set whatever speed you would like to travel at depending on your mode of transportation Setting up for Pace Monitoring First select the main menu item Options gt Preferences Next select the Pace section You will see a screen as it appears on the right y PathAway at 2 12 57 lok ID michael J Transportation Background 5 Pathaway eee 12 43 ok Route Point Pace Colors and Lind 4 gt Monitor Pace By Average Speed 34 53 mph Correction Distance 1 15100000 mi Cancel From the Monitor Pace By section choose Average Speed from the drop down Notice the Correction Distance option on this screen This option allows you to setup a catch up distance if you fall behind PathAway will show the Target Speed on the dashboard This Target Speed is the speed you must travel in order to catch up or slow down to your specified average speed Set the Correction distance to 1 mile Press Ok to return to the main map screen PathAway Manual Page 36 of 4 4 Apr 07 Next setup the Dashboard to display Pace information i PathAway A 21 45 X To do this tap and hold on an existing Dashboard item like the Latitude Longitude setting or any yellow tick mark on the side of the screen The Dashboard menu will popup On this menu select the the Pace Info gt sub menu The options here are Speed Delta Speed difference between your Average Spee
89. llowing ways o select the or buttons or press the hard Up out or Down keys In or e select an area of the map to bring up the Popup Menu Choose Map Menu gt from the list and select Zoom Map In or Zoom Map Out or PathAway Manual Page 22 of 4 4 Apr 07 e selecting an area of the map Choosing Map Menu gt from the Popup menu from the Map Menu gt select Choose Map gt and select the map by name rr ri i J The samples come with a few different resolutions of maps The E buttons Pur EE en dE 4 32 x at the top right of the screen allow you to move into and out of these stacked maps You don t need a map to increase or decrease the view but if there is a map available it will be shown These buttons change shape to show you whether there is a map available A highlighted zoom Ll button indicates there is a map available An un highlighted zoom MF button means there is not Scroll around the Joseph River You ll see the buttons change When the H button changes to press it You ll be shown a closer up view of the river You can also select maps by name by going to the Options Maps dialog selecting a map and pressing the Display button Please note moving between stacked maps should not be confused with map scaling where you zoom into or out of a single map by expanding or shrinking the map The scaling of maps is done via the magnifying icons Sa 0 8aaau El 2 Scaling a Map Expand Shrin
90. lobal setting to show text in different sizes y Menu Text Normal When large text is selected each font on the dashboard is expanded by one Menu Text Large size When small text is selected each font is reduced by one size Y Show mechbnard Mormal Text Show Toolbar Show or hide the toolbar on the main screens O ea ee Small Text Show Text Menus Shows text menus instead of iconic toolbar Useful for one handed operation using the command buttons instead of a stylus Show Toolbar Show Text Menus Cancel Options Menu Dialogs I L ae Pathaway er al 8 37 ok Options gt Routes ES Pontes Bay to Ross Route management dialog Lists all of your routes You can create new routes edit a route or choose an existing route to follow forward or reverse The E Route 04 05 25 18 29 current Route you are following is indicated in the rightmost column by an f E Route 04 06 11 01 51 for forward or r for reverse E Route 04 06 16 22 50 Route 04 07 14 18 50 Select a Route to follow by highlighting a route in the list If the Map Display Preferences are set to Show All Tracks then a check box will appear beside each route Turn the check box on to always display the route on the map Turn the check box OFF to hide the route from the display Database Options Sections E Routes Dialog Buttons PathAway Manual Page 77 of 4 4 Apr 07 Note On some Operating Systems the buttons described below a
91. m buttons are not highlighted EE or E you can increase of decrease the view range of the virtual map In this case The scale zoom buttons A or A do the same thing The Zoom 100 button a in this case will bring up a dialog allowing you to specify the desired zoom range Navigating with Maps When navigating with maps PathAway will center the map on your current location When not connected to GPS you can scroll the map to view different portions To scroll the map Tap down then drag the stylus on the screen to scroll the map in the direction you want Navigating with a GPS Device PathAway supports any NMEA0183 v2 0 or higher compatible GPS device This encompasses the majority of GPS devices on the market Delorme Earthmate and Tripmate proprietary protocols are also supported A GPS is not required to use the software A GPS device can be cable or infrared Special serial cable can be purchased from GPS device manufacturer A handheld device serial cable adapter can also be purchased separately Some devices may come with the required cables for connecting to your handheld device See the section on GPS Sites for information and links to get your device attached to a GPS Current location on map is shown by the cross hairs in the center of the map window or with an arrow showing direction of travel When connected to a GPS direction is shown by course required to reach the next point on route To navigate with your own map
92. map viewing Choose the View menu option Show Dashboard to turn the dashboard back on PathAway Manual Page 65 of 4 4 Apr 07 You can also utilize the entire full view of the screen by turning the Top Toolbar off by selecting the View menu and choosing Hide Toolbar To adjust individual dashboard items simply Tap and Hold the item you ir u j x A A y A iF toi P tha T Fa 0 41 would like to customize The Dashboard Options menu will appear showing the ies E EPA e ds currently selected item and the options to available to set for the dashboard a Hide E When there is no active information available for a dashboard control item or E Tracking Info e the dashboard item is hidden only a bar will be displayed Clicking on one of F Routing Info the bars will bring up the dashboard menu ses al General Info Flo Sa ogaao A PathAway Manual Page 66 of 4 4 Apr 07 Toolbar Buttons Z AM FAJ 5050 The top of the screen contains a set of tools designed for quick access to the most common functions Toolbar 2 Main Menu Bar Press to bring up the Main Menu Turns to hourglass when drawing screen Connect Disconnect GPS When connected to GPS turns to a Lock icon when a GPS fix is obtained Vertical bars shows of satellites fixed on Short dots indicate of satellites in view Add Point at location oggle proximity alarm on off Scale Zoom into current map by expanding the map
93. mat as PathAway i umi z E and the Address as http athaway com cgi bin locpost cgi same as W PathAway en ed ok send address Format o a Pathway EN Press the button beside the Format dropdown This dialog is identical to the Send Format Settings dialog Select the Owner Name or Other and Address the name you entered for the Send My Location command http pathaway com cgi binJlocpost cgi Press Ok from this dialog and Ok from the Retrieve Location Settings dialog to return to the main map screen Commands Ensure you disconnect from your GPS before proceeding Manual Retrieve Locations To download the location you recorded earlier select the Retrieve Locations option from the main Remote menu PathAway will initiate the request in the background When the location has been received a status line message will appear If the retrieval is successful then the message will be Received Remote Location or if multiple locations are received the message will indicate the number of new locations retrieved If the retrieval OK ES Cancel is unsuccessful then an error will appear on the status line You can check the My Documents PathAway folder in the file PathAwayReceiveLog txt to view the data log PathAway Manual Page 33 of 4 4 Apr 07 Viewing Remote Locations Once received you will see a colored label and pointer icon appear on the map screen in the locatio
94. mmended to impose a limit PathAway Manual Page 73 of 4 y Pathaway ye 12 55 ok Device GPS Log Advanced _ Record GPS Data to Log File Settings Erase Log File Max File Size kb enter 0 For unlimited E Cancel 4 Apr 07 GPS Configure gt Advanced GPS Options i Pathaway ey 1 01 lok Advanced The advanced options are settings that are uncommon to most GPS device Device GPS Lor configurations Only adjust these settings if you are having problems communicating with the GPS or the specs for your GPS require it Elevation Correction None le C Timer comm Disconnect if Mo Response after Parity Bits Stop Buffer JE S e Elevation Correction Elevation correction allows you to set an amount to adjust the Elevation reported by the GPS Some GPS devices report the Elevation Options are Sirf GGA Altitude Correction NMEA rules say elevation in GPGGA is either uncorrected ellipsoidal WGS84 elevation or if a correction table is included with the GPS Receiver then the corrected near geoidal elevation is given plus right behind the value is noted by which this corrected elevation differs from the ellipsoidal WGS84 altitude But some SIRF II chipset devices do not stick to this rule They give the uncorrected ellipsoidal elevation as altitude plus the correction value right behind So using a sirf II chipset may end up with a wrong elevation constan
95. n where you last sent your location If the location does not appear on the map screen you can center the map on the location by selecting the main menu option Remote gt Center Active Remote Or you can also go to the Remote Tracking View screen from Screens gt Remote Tracking View and tap and hold on the name of the Remote and choose Show on Map By default the remote label will show an icon indicating the remote s direction of travel and a label with the name and details about the remote By default the label will show the name elevation heading speed and the time and date the remote data has been captured Note The date will not be displayed if it is today s date and the speed and course will not display if the remote is stationary Changing the Remote Item Label The labels for the remotes can contain a lot of information about the remote This amount of information that appears on the map can be controlled in the Remote gt Remote Settings dialog under the Map section These options are explained in the reference section To prepare for the next section of the tutorial turn off all the options except Show Remote Locations and Show Name View Multiple Remotes y Pathaway Pi EE X Pal 5 ad IES Wiii 12 23 06 Y 1a kE tina 3 ie oot Gp gaan j PathAway er 2 25 ok Send Loc Retrieve Lo aut A o Map Display Show Remote Locations Show Mame Show Elevation Show H
96. nd ire u r a Pathawa 1 9 14 ok colors on the maps are displayed If you have a color device you can create ma Y e ds easy to read contrast between your maps and route and track lines Route Point Colors and Lines Hart 4 gt Experiment with this option until you ve found a view that suits you You can even change the look of the current Position Marker by selecting between 3 f _ Active Route Other Routes different styles Line to Mext Point Active Track Other Tracks Dashboard Point Labels Fosition Marker 3D Effect r ogaao mj PathAway Manual Page 24 of 4 4 Apr 07 For example to change the way the active route you are following is drawn 4 F PEENE T HI p m click on the Active Route button This will bring up the Line Style dialog and display the current style for the Active Route Change the color by clicking on the Color button and the width of the line by pressing either the or buttons beside the width label To have a circle drawn at each Route Point check the Show Points button When you are satisfied with the style press the OK button Show Points 5 Show Turns Sn ogaao El The Position Marker is the Arrow or cursor in the center of the screen It a t dz 9 15 represents your current geographical position on the map If you are i ee navigating with a GPS it points in your direction of travel If you are ok xt disconnected and following a route it
97. nformation by default Top Left Heading Compass Top Right Next Point navigation Compass Left under heading Compass Primary Location Coords Plus Time Date Speed Elevation S m 04448 650 Bl PathAway Manual Page 17 of 4 4 Apr 07 GPS Sky View Shows a Sky view circle showing each SVID and it s relative location in the sky Also show fix and signal strength information Red Symbols indicate a GPS Fix white symbols indicate no signal gray indicates a weak signal no fix T gr a iz05 S 4 0 33233 50 El Satellite Data View A em et a Shows Details of Satellite data Each satellite detected is listed Columns are lin Pathiway s 11 53 Xx as follows Svid Satellite Vehicle 1D This is the identifier number for the satellite 255 undefined SNR Signal to noise ratio in Db Hz 1 if no signal Elevation Elevation in nautical miles above mean sea level Azim Azimuth in Degrees relative to TRUE Magnetic North E Ephermis valid 1 yes 0 no D Differential Fix 1 yes O no U Satellite is Used in determining location 1 yes 0 no0 R Satellite is Signal Strength is Rising 1 yes O no S QQan El PathAway Manual Page 18 of 4 4 Apr 07 Remote Tracking View Shows the map and list of Remotes Remotes are listed showing distance i PathAway er E 7 06 X and heading to Tap and hold on an item to bring up the context menu for ra Tp commands to issue on the remote item Remote locations are l
98. nt location for the Active Track Log If a Track Log Point is under the location clicked on then options for this point are shown otherwise only options for the Active Track log are shown Follow Forward Follow Reverse Suspend Tracking Hide Track Log Calculate Area Tracks Sa o ARARAD E Name Description Action lt Current Track Log gt Displays the name of the current track log Follow Forward Activate the selected Route to follow from the start Shown when a track log is active Activate the selected Route to follow in reverse order Follow Reverse E Shown when a track log is active starting at end point of the route Suspend Resume Suspends or Resumes recording positions to the Tracking current track log adi nan PathAway Manual Page 59 of 4 4 Apr 07 Show Hide Track Log Calculate Area Tracks PathAway Manual Shows or hides the current track log on the map Calculates the area bounded by the active track The last point will be connected to the first point via Straight line Note the calculation will be incorrect if the track lines intersect at any point Go to the Tracks dialog to choose other Tracks Same as selecting the main menu Options Tracks Page 60 of 4 Always shown Shown when a track log is active Always shown 4 Apr 07 Dashboard Context Menus Customizable Dashboard Options allow you to see the information you are most interested in Each of the PathAway screens
99. nual for more info on UTM If you have set your preferences to UTM coordinates see Options gt Preferences gt General the data is entered as follows Grid Zone Format lt Zone Number gt lt Zone Letter Designator gt Example 17T meaning Zone Number 17 Designator T Northing Northing or vertical value specified in Metres within the Grid Zone Example 5001954 Easting Easting or horizontal value specified in Metres within the Grid Zone Example 0603881 Entering OSGB Coordinates Ordinal Survey of Great Britain OSGB coordinates define two dimensional horizontal positions within the area of Great Britain If you have set your preferences to UTM coordinates see Options gt Preferences gt General the data is entered as follows PathAway Manual Page 118 of 4 Grid Zone Format lt Two Letter Designator gt Example ST Northing Northing or vertical value specified in Metres within the Grid Zone Example 02115 Easting Easting or horizontal value specified in Metres within the Grid Zone Example 17353 PathAway Manual Page 119 of 4 4 Apr 07 PathAway Tools Installing Install PathAway Tools on your Windows PC by running the Install program PathAway3Install exe The install wizard will lead you through the steps of installing the software Ensure the option for PathAway Tools is selected Once completed PathAway Tools will be installed on your computer in the folder you specify and can be
100. o open the file or save it bo your computer Open Save Cancel More Into i Always ask before opening this type of file It is safe to download the PathAway install executable It has been certified to be Virus free and will not access any private information on your PC On this screen you can run the Install program as soon as it downloads by pressing the Open button To run the install later press the Save button and specify a folder on your computer to save to Be sure you remember this folder so you can find the program after the install is complete If you pressed Open the Install program will run immediately after downloading or If you pressed Save then locate the program on your PC via your Desktop or Windows File Explorer Right click on the PathAway3Install exe icon and press Open from the Popup menu PathAway Manual Page 6 of 4 4 Apr 07 The following screen will appear al51x License Agreement Please review the license terms before installing Pathway GPS 4 Press Page Down to see the rest of the agreement Jathaway License Agreement The following is a legal agreement between vou and MuskokaTech The purchase of Pathoway tcl is For personal individual use not intended For copying modifying networking or otherwise use on more than one computer or computer terminal By downloading Pathaway software vou agree to these terms MuskokaTech s policy is one of on going pr
101. o the left of the folder name Semmes Storage Card H i AUDIO New Folder Create a new folder Edit the folder name inline then tap outside a GARMIN the field to apply the name 7 l PALM Pathaway i Temp New Folder Options gt Preferences Settings for options such as units of display track recording options map display options time estimation settings hard key settings map and dashboard colors routing options etc PathAway Manual Page 98 of 4 4 Apr 07 Options gt Preferences gt General Distance Elevation Volume Course General settings for units of measure New Trip on Startup Automatically run the New Trip dialog when the program starts Allows you to choose your route instead of the program automatically starting with the last used route and track log Stay on when Connected Override handheld s auto shutoff feature Options gt Preferences gt Coords Define the geographical coordinate display format and datum Latitude Longitude UTM OSGB or other national grid Primary Secondary Coordinates You can set two sets of coordinates for PathAway The primary coordinates are used as the default location display and for editing and viewing of all particulars involving geographic coordinates Position Define the geographical coordinate display format Latitude Longitude UTM OSGB or other national grid Datum Specify the Datum to use for the coordinates Most popular datum is WGS84 Use Current Map
102. ocation where the point SHOULD be This brings up the Points list Select the point that should be displayed at the selected location In this case choose the Corner Store point Press OK Do the same for the second point I e Click where your home is on the map then select the Home point you captured earlier Note It is best to try to pick two points that are as far away as possible and not positioned horizontal or perpendicular to each other This gives the map calibrator more data to perform the adjustments Once calibrated your known points should be displayed on the map in their correct locations r Pathway P ef d 4 23 ES T I Calibrate by THREE or more known points The Known Points Calibration method brings up an interactive screen that a allows you to select the known points on the map and then specify their geographic coordinates If you have saved points already you can select these points to be used in the calibration Commands are as follows Show Highlight this button to automatically move the map into view of the calibration point Mark Highlight this button to mark the point on the map as it s pixel coordinate To mark the point tap and hold on the location on the map where this point resides y Fe Point Select an existing point from the Points Database to use as the Le A Sweat geographic coordinates for the calibration point Show Lana Lat Del Remove the calibration point V ID
103. ocations sent to the device via SMS or from the Remote gt Retrieve Locations command See the tutorial section on Remote Tracking for more information 1 518mi 1 011mi Michael J 1 956mi sue 100 182mi Container 102 Sp ARAS Faan Choosing a Route T PathAway e i 9 11 ok The sample data includes a route for you to try out Go to the GPS menu and choose New Trip Follow Route Forward In the New Trip dialog select the drop down at the top of the screen and Follow Route Forward Follow Route Reverse choose Follow Route Forward AE Transportation mode Tracking Record to Track Log i Mew Log 05 Add to Track 04 08 05 23 12 PathAway Manual Page 19 of 4 4 Apr 07 Next from the Database drop down select the route entitled Footes Bay to Rosseau You re about to take a nautical tour through the lakes of Muskoka Canada You have now chosen to use the Footes Bay to Rosseau route for navigation Tack 04 06 02 20 17 from the start of the route to the end Follow Route Reverse allows you to Route 04 07 14 18 50 follow the route in reverse order for the return trip home Route 04 05 25 15 29 Route 04 06 11 01 51 Route 04 06 16 22 50 Press OK to return to the main screen Track 04 07 26 19 49 A TIVE Lots Eb to Otter Lake 04 07 25 21 07 BB TO Bracebridge to Port Carling Default Tracks TRACK 04 05 2 Ji PathAway Manual Page 20 of 4 4 Apr 07 of Route This moves the map to cent
104. oduct update and revision MuskokaTech may revise or discontinue Products ak any time TF you accept all the terms of the agreement choose I Agree to continue You must accept the agreement to install Pathdway GPS 4 Mullsart Install System v2 0b3 Z Back Cancel Read and accept the License Agreement then press I Agree The Choose Components Screen Appears Pathaway GPS 4 Setup ES Choose Components Choose which features of Pathaway GPS 4 you wank to install Check the components vou want to install and uncheck the components vou dont want to install Click Next bo continue Select components to install Pathaway GPS 4 PathAway PC Tools User s Manual Description Space required 5 8MB Tools to convert digital maps to Pathaway Format and to create custom icons Nolsoft Install System v2 0b3 Z Back Cancel PathAway Manual Page 7 of 4 4 Apr 07 Select the desired components to install At the very least you need to choose PathAway GPS 4 It contains the actual program to run on your Handheld The PathAway PC Tools allows you to prepare your own maps and icons for use on the device Once selected then you need to ensure that ActiveSync is running and connected to the device Press Next and continue to follow the onscreen instructions until the Setup program reports the program has been installed successfully Complete the installation by selecting Finish and reading the ReadMe file for
105. of Points databases You can store points in multiple databases and Point Databases show hide databases Waos Management of Maps stored on the handheld or expansion card Shows list of maps Options to edit map location details Display map delete maps beam maps to others Management of Downloadable Maps from the Web Maps can be downloaded via various Web Maps Web Map Servers This option allows you to choose which service to use and whether to automatically download maps for the viewable area of the map Folders The Folders dialog allows you to specify the file folders that PathAway uses to look for Maps Point Route and Track databases Settings for options such as units of display track recording options map display Preferences options time estimation settings alarm settings and GPS configuration Adjust map location coordinates by selecting 2 known points on the map Map location is Calibrate Map adjusted by distances between the two points by nudge controls or by setting the top left and bottom right longitude and latitude coordinates About PathAway Information about PathAway Registration key entry PathAway Manual Page 50 of 4 4 Apr 07 Goto Menu Pathaway ey ME 305 X Goto Start of Route Options Goto End of Route Remote Goto Start of Track Goto End of Track Screens F View Find Location Show World Map Go to Start End of Route Moves location to the s
106. of known geographic points 4 by projection type along with some known points PathAway Manual Page 120 of 4 4 Apr 07 When you re done save the map by selecting File Save Map As You will be prompted to save it with a prc extension You can also send the map directly to your handheld device via the File Send To command Select the option File Send Map to Windows Mobile Device ActiveSync must be running and connected to the handheld device For importing pre calibrated maps PathAway Map manager supports jpr calibration cal format and PathAway s own PWM format See the Advanced Map Converter manual for details on these formats Icon Manager The Icon Manager allows you to create your own custom icons to represent Points or mode of transportation icons If you haven t done so download onto your PC the sample icon and vehicle databases Once done open up the Icon prc file from the File Open dialog You ll see the list of icons already in the database Each name for an icon must be followed by a P comma P This is an indicator to PathAway that the image is a Point Icon Similarly V comma V indicates a vehicle icon Create your own icon using an application such as Windows Paint Create an image no larger than 24 pixels wide by 14 pixels high The average is 11x11 Save the file as a BMP or Jpeg Then in the icon manager choose Image Add Image and select the icon you just created That s it now save the file
107. og to choose other maps not Choose Map gt within the bounds of the selected area Same as selecting the main menu Options Maps Map Display Brings up Map Display Preferences Dialog Other Maps Brings up list of all available Maps PathAway Manual Page 54 of 4 4 Apr 07 Tri iJi HF PathAway P an EE A I L Map Popup Menu gt Map Menu gt Zoom Map CIO SS Contains zooming options for maps A Scale Zoom Out Scale 100 select Scale Name Description Action lt Closest Map gt Displays the name of the current map if any none Zooms into the next map under the selected location Map Zoom Out Center map and Zoom out to the wider area map For all Taps Overview Map Displays the overview map Expands the pixels of the current map to show a close up view of the area Map Zoom In For all Taps Scale Zoom In Shrinks the pixels of the current map to show a wider view of the area Scale 100 Draws the map in its original scale Scale Zoom Out PathAway Manual Page 55 of 4 4 Apr 07 Map Popup Menu gt Map Menu gt Rotate Map y I ri L GF PathAway T gr A E9 A a Contains rotation options for maps Note if the Preferences are set to Auto Rotate then the map will automatically rotate upon the next location movement EN y WS Za ogaao Ml Name Description Action lt Closest Map gt Displays the name of the current map if any none Rotate Left Rotates the map
108. ound file from the list Clear Play Play the sound Clear Remove the sound from the point Database PathAway Manual Page 85 of 4 4 Apr 07 r a Pathiway T en 4 10 ok M I L nfo Location Sound Picture A Options gt Points gt Edit Point gt Picture This section you can select a picture or video clip to attach to your point The picture can be viewed when this point is the closest in proximity select it from the dashboard when it pops up to indicate the point is in proximity or you can select the point and view the picture from the map popup menu Storage Card Pictures MyPic jpg Es Picture Name of picture or video file Note not all systems may support video Pictures may be Jpeg Bmp Gif or Png Capture For handhelds equipped with a digital camera this option will allow you to take a picture and attach it to your point See Release Notes for currently supported handhelds Database Options gt Tracks Routes Points gt Get From GPS PARTIR ef EN ok Device For acquiring data from Garmin GPS devices Routes Routes Downloads all routes from GPS Each route will be downloaded to a Tracks unique route database Combine Track Segments Tracks Downloads recorded track logs from GPS Garmin separates track logs _ Points Into into segments The tracks can be downloaded into a single track log containing Default Pointe all track segments or each segment can be placed in a separate d
109. pla E When text menus are used the Tools menu contains the items that would appear on the Toolbar Additionally the Tools menu has options for setting the directional keys so you can select items on the screen without the need for a stylus Map 200 Map oom Out Scale Zoom In 3 Scale Zoom Out Scale 100 Ye Select Scale 4 Directional Keys y Toggle Alarm Add Point Toggle GPS Zoom In to another Map When the Map Zoom In button is highlighted it means there is a higher resolution map at the current location Pressing this button will show this Map Zoom In map on the screen If unchecked then the view will zoom out to the virtual map view where no map is shown on the screen If there is no active map this button performs a Scale Zoom In Zoom Out to another Map When the Map Zoom Out is checked it means there is a lower resolution map at the current location Pressing this button will show this map on the screen If unchecked then the view will zoom out to the virtual map view where Map Zoom Out no map is shown on the screen If there is no active map this button performs a Scale Zoom Out Scale Zoom In E Scale Zoom into current map by expanding the map Scale Zoom Out a Scale Zoom Out of the current map by shrinking the map Scale 100 Restore the map to 100 view No Scaling is done for this view Select Scale Dialog allowing you to specify the desired zoom range Directional Keys gt Options for
110. ration pol Wid 44 05692 M45 07 95300 lt gt Traverse through the 9 calibration points Lu 01233220 E OK Save the calibration settings X Exit Calibration mode PathAway Manual Page 94 of 4 4 Apr 07 r a Pathaway ey 3 12 x Calibrate using Nudge Controls M I When the option for calibrating using Nudge controls is selected the nudge control screen is shown Nudge moves adjusting the calibration of the map by geographical coordinates Ap This amount of adjustment is set by the nudge factor The nudge factor is set dd Scaralife in decimal degrees te Hal Point This screen contains a number of buttons for adjusting the coordinates of the map As well a nudge factor can be set for adjusting the precision to which to move the map e 2 1 Adjusts the map towards the corresponding direction by the given factor nudge ESE Z adj l e l 4 Adjusts the map in both directions horizontally or vertically by the F given factor ES 3 kd u a a A o E E TID E adjusts the map in both directions equally horizontally and vertically by the given factor Effect is to make the map appear to cover a larger or smaller geographical space Note if the geographical width is not exactly the same as the height then the map sizing movement will appear to be of different values horizontally and vertically since the pixel coverage of a nautical mile degree lat or lon is different between width and h
111. re found on the Menu New Create a new route Will launch the Route Database Info Dialog Edit Points Add or Edit Route Points Launches the Point Record Management dialog Details For modifying the details of the route such as name transportation mode and individual points Launches the Route Database Details Dialog Follow Off Clears the Follow flag on the selected route Follow Forward Activate the selected Route to follow from the start As you travel your current position along the route will be displayed Information such as ETA Dist to Next point Distance to destination etc can be displayed Follow Reverse Activate the selected Route to follow in reverse order starting at end point of the route Goto Reposition the map to the start of the selected route New Create a new blank Route Database Use the Edit Points option to add points to the route or add points via tapping points on the main screen set the new route to be followed first Routes Dialog Menus Name Description Database Menu New Creates a new route Edit Points Edit track records in the Points Record Dialog Duplicate Duplicates the selected track Select the a route database select the Join menu command It will go back to the Route Join database screen Then you select the route you want to append to the previously selected one Press OK The Join will be performed Delete Deletes the selected route Beam Beam route database to ano
112. red Route being followed must contain Elevation information Altitude Too High Low Sound different alarms to indicate whether you are too high or too low from your target altitude Setting these checkboxes override the default Altitude warning sound GPS Fix Acquired Lost Alarms that sound when a GPS fix is first acquired or when the signal is lost Remote Location Notifications Sound alarm when a new remote location is received or when your location is successfully sent Or set different alarms when a send or retrieve fails Location Send Notifications Sound alarm when your location is successfully sent Sound a different alarm if the location send fails Location Receive Notifications Sound alarm when a new remote location is received or when a location retrieval fails The failure alarm applies only to the Http based Location retrieval Edit Select one of the alarm settings and choose Edit to modify it s sound and trigger distance PathAway Manual Page 102 of 4 Time Map Tracking Time Map Tracking All Alarms e 2 8 20 ok Alarms Roul 4 i l Pathaway All Alarms Alarm Mame Turn Instruction Reached Turn Left Turn Right _ Altitude Warning Altitude Too High Altitude Too Low GFS Status Warnings GPS Fix Acquired GPS Fix Lost Remote Location Notifications Location Send Notifications FF Cancel PathAway ee siZ 3 21 ok alarms Row 4 gt Alarm Mame Alti
113. reens Goto Next Remote View Goto Previous Remote Auto Center Remotes w Enable Remote Tracking You will be presented with the Send My Location dialog In this dialog you enter the following Pathaway of 10 41 lok a A m Send Addresses This is the addresses to send the location to For SMS Send Addresses enter the cellular phone number of the recipient For Http enter the Web URL http pathawawy compPcgi binflocpost cgi A of the recipient server In this example enter the PathAway FindMe location by entering http pathaway com cgi bin locpost cgi This will enable Eo mat you to test whether your location send is working properly Note You can send to multiple locations by separating each address with a semi colon Pathawary Touratech Qy MMEA aa Format The Format dropdown lists the available formats available to send If NMEA RME you are sending via SMS directly to other PathAway handhelds use the PathAway format Check with your Tracking Service provider for the required format to send in There are certain settings required in order to correctly send your location To set this up press the button beside the Format dropdown FF Cancel PathAway Manual Page 30 of 4 4 Apr 07 The Send Format Settings dialog is for specifying your account information and your identifier for the recipient to understand In this example simply ensure the Owner name button is checked off This
114. relative world location You may zoom in by pressing the Zoom Scale In button a few times This image map of the world is very low resolution and will lose detail after zooming a few times The Map Zoom In button wil highlight when you position your location over an installed map Press this button when it turns yellow to go to the map in that location If this button is not highlighted ol then pressing it will increase your resolution but will go to No Map view meaning no map will be displayed but all tracks routes and points within this location will be With PathAway you do not need maps to do navigation Sn gagao El Remote gt Send My Location Dialog PathAway PRO provides the ability to send locations to others so they can see where you are Others can view your location directly on their handheld y PathAway ar d 10 41 ok Send Addresses or via Web server http pathawawy compcgi binflocpost cgi mn There are two methods for sending location SMS Simple Messaging Service or HTTP To Send your location ensure you have a Wireless data connection and connect your GPS and acquire a fix of your current location Next select the main menu option Remote gt Send My Location You will be presented with the Send My Location dialog In this dialog you enter the following Send Addresses This is the addresses to send the location to For SMS enter the cellular phone number of the recipient For Http enter
115. run on a fixed route and prevents from inaccurate data due to drift or GPS precision Disconnect GPS at Finish Disconnects GPS at the exact time the target distance has been reached Provides an accurate reading of the travel duration instead of relying on the operator to disconnect Options gt Preferences gt System The System preferences contain more advanced general settings for PathAway ae Pathaway A at a2 6 18 ok Event Timeout PathAway monitors for events from the system ona Hard Keys System ao continuous basis On occasion it may be necessary to force PathAway to wait for a few seconds before checking for new commands Typically increasing the Event Timeout 100 1sec bo wait time may be necessary to enable for some system resources like GPS device drivers to process their own data O no wait 1 wait for event Show GPS Connecting Status Show GPS Connecting Status When the GPS is initially connected a status Switch Units when within line is shown at the bottom of the screen to show the flow of GPS information being sent by the device Once a fix has been reached the status bar is nm removed This option allows you to disable this status line so it does not show a Speed Precision Decimal Places when connecting the GPS Over 10 o Under 10 Switch Units when within X nm With this option enabled PathAway will switch from Major distance units such as nm miles kilometers to minor units ft metres wh
116. s you need to convert and install them into PathAway using PathAway Tools Map Manager You can acquire maps from online web mapping sites or scan them from paper maps use digital pictures or get maps from CD ROM In order to use maps with a GPS you need to calibrate them to their proper geographic longitude latitude coordinates This can be done in Map Manger by specifying the top left and bottom right coordinates of the map or in PathAway using positions of known points Refer to Calibrating Maps for more information Once calibrated PathAway will center the map to your current location As you move the map is re centered to show your position If you are recording your track you ll see a blue or dark gray line showing your line of travel on the map PathAway Manual Page 45 of 4 4 Apr 07 Main Menu The following menus are available from all Navigation screens Select the PathAway main menu by pressing the Main a menu toolbar icon GPS Menu Pathway ee 1 34 X a 7 o e Ti EA Y AZ A i Disconnect GPS Simulate GPS Pocket Mode Options Remote Start New Trip Screens End Trip view Advance Route Target Set Closest Route Target CEN Configure GPS Connect Disconnect Controls connection to GPS device Simulate Simulates a route by animating travel along the points of the route Turns off screen and locks keys but continues GPS tracking This feature enables you to track your way while reducing
117. s useful to avoid screen clutter when viewing wide areas Icons can be displayed in Normal or double large size Show Text Labels Show the point text labels When you zoom out you can specify the threshold when the text is not to be displayed This is useful to avoid screen clutter when viewing wide areas Highlight Closest Point Show label distance to and pointer to the closest point in proximity You can specify to show the point name label distance from current location and heading from the current location PathAway Manual Page 76 of 4 General Coordinates Time Map ye ME 12 13 ok General Coordinates EID mao O Show Points Show Icons Large Icons Show Text Labels _ Highlight Closest Point Show Label Show Dist Show Heading Show Location Grid Menu Text Mormal _ Menu Text Large F Pathway Plormal Icons Cancel 4 Apr 07 Menu Text Normal Large Text Global setting to display normal or large text for popup menus The large text option is useful for arms length viewing and finger selection PathAway ye ME 12 14 ok General Coordinates Time Map 4 gt maoy o O Show Dashboard Show or hide the Dashboard Show Label Show Location Grid Show or hide the horizontal and vertical grid lines on _ Show Dist the map Grid lines are show in longitude and latitude increments Show Heading _ Show Location Grid Normal Small Large Text G
118. seconds so updates to your location will be shown at regular intervals This activity has shown you how to send your location manually by issuing the Send My Location command You can also have your location sent at regular intervals by setting up the Automatic Send feature This is done in the Remote gt Remote Settings gt Send Loc dialog Refer to the Reference section for details on this Next step is to retrieve locations from a tracking server to set PathAway up as a mobile location monitoring station PathAway Manual Page 32 of 4 4 Apr 07 Monitoring Remote Locations The simplest way to retrieve a remote location is to request the location you just sent using the Send My Location command To do this you need to setup PathAway to Retrieve Remote Locations Pathaway Ek 2 55 ok Send Loc Retrieve Loc Mar Setting up Remote Tracking Automatic SMS Location Receive er Automatic Http Location Retrieval From the main menu select Remote gt Remote Settings In this dialog select the Retrieve Loc section You will see the options for automatically polling a server to retrieve locations on regular intervals For this example do not turn on the automatic polling Polling Interval Every 10 00 minutes Settings Press the Settings button This brings up the Retrieve Locations Settings dialog E Cancel In the Retrieve Location Settings dialog enter the For
119. ses Connect Point and OK Screen In Out Disconnect button Views GPS sa To override or disable the functions of these keys go to the Preferences Hard Keys dialog Hard Key Assignments 2 Button Devices Hard key Navigation Hard key 1 Hard keys 4 Add Connect Up down Map Zoom Point and OK Left Rt Scale Zoom button Disconnect GPS To override or disable the functions of these keys go to the Preferences Hard Keys dialog Note some hard keys can also be used to press OK from a dialog New Trip Dialog OK key Connect GPS hard key Edit Point OK key Add Point button PathAway Manual Page 70 of 4 4 Apr 07 Dialogs GPS Menu Options from the GPS menu bar Start New Trip HF PathAway A ES ok a KR Follow Route Forward For selecting route and track recording log before beginning a trip This dialog requires that you have previously defined or recorded the routes or points you Track 04 08 02 20 17 are going to use for navigation Transportation mode z Tracking Record to Track Log i Mew Log 0 Add to Track 04 08 05 23 12 Follow Track Forward or Follow Track Reverse Select the route to follow Ez PathAway de 9 11 ok I pes from the list of previously created routes and recorded tracks L Follow Route Forward Navigate to Point Select a single point to navigate to Selecting this option No Route will bring up the Point Selection Dialog Here you select the point to navigate
120. so A NA 84 Optlons gt Polnts gt EdIt PONS IO o 84 OptlohS gt POIAEs gt EdIt POINt gt LOCatO Mirian isso ninas 85 Options gt POmts gt EGItsPOIn C 5 OUI daa a 85 Options gt POINntS gt Edit ROME PICTUS iia lat 86 Options gt Tracks Routes Points gt Get From GPS DeVICEC ccccccccseeseeeeeeeeseeeeeneseeeeeneegeeneens 86 Options gt Tracks Routes Points gt Send To GPS Device cece ec ccee cece tees rn rr 87 ODUONS Ma DS nia 87 Map Dilo MONU Siasau A E 87 Options gt Maps gt D ClalllS A EA AAA AAA A wee 88 Options gt Maps gt DetaliS gt INTO ii NA A 88 Optitons gt Maps gt Map Details gt Calibration cuisissinisaic ri e 88 Options gt Maps gt Move To From Expansion CardsS cccccccccssecceeseceeeeeeeeetseeeeeegeeeageeetegeenes 92 Options gt Calibrate Mad a lord aeatedeus N natn te a a a AAA 92 Calibrate DY TIO KNOW DOINGS tar ir oa 93 Calibrate by THREE or More KNOWN POINtsS ccccecsceneteeeceneeneessceneeeeceneeneesscanateessenaans 94 Calibrate Using NUGGe Controls ii A 95 Calibrate Manual trobar aOEoS 95 Options gt PONC DatadaSes wisi veces A AS A aaa eens 96 Point Database Dialog MEM US cinirenen tu Sun dawds eae euwi hata emeueen binds NAA 96 Options gt Web Maps Beta for Experimental PUrPOSES ccccccceeeee eee e eee eeeeeeeeeeeeeeeeeeesanaes 97 ODUONS gt Folders nin aa AAA 97 Optlons gt Preteren cesa di aa 98 Options gt Preferences gt GeMNeral ccccvsccnnuecccescccnnueecne
121. splays the picture associated with the selected point Plays the associated audio attached to the selected Play Audio point Allows adjusting the location of the selected point by Adjust Location tapping it s proper position on the map PathAway Manual Page 53 of 4 Shown always Shown always Shown always Shown always Shown always Shown always 29 PathAway gra asa amp e Edit Point a s r adjust Location Sa dd Point _ gt Action Shown when a Point is selected Shown when a Point with an associated picture attached is selected Shown when a point is selected that has an associated sound clip attached to it Shown when a Point is selected 4 Apr 07 Delete Point Deletes the selected point from the Points database Shown when a Point is selected Map Popup Menu gt Map Menu gt I L HF PathAway T gr iai ES Contains location sensitive options for maps such as zooming repositioning map and choosing maps within the boundaries of the location selected Name Description Action lt Closest Map gt Displays the name of the current map if any none Center Map Centers map at selected location For all Taps Zoom Map gt Menu options for zooming in and out of maps For all Taps Rotate Map gt Map Rotation menu options For all Taps Remove the map from the screen or show the Show Hide Map current map if it has been hidden Go to the Maps dial
122. stination folder FG PathAway gra ase ok Options gt Calibrate Map Re center Map to current location Once maps have been transferred to the device you can fine tune the map coordinates by matching the positions of known points on the maps with the actual position displayed by the map Resolution and offset of the map is l adjusted Or the map database can be edited and the top left bottom right _ Calibrate by THREE or more known points coordinates of the map can be manually edited on the map C3 Calibrate using nudge controls cy Calibrate top left and bottom right by selecting TWO known points First you should select the map you are going to calibrate If the map to O ib ki calibrate is not visible go to the Options Maps dialog and choose the map by me ha manually by entering map it s name and tap the Show button ENMON To calibrate the map select the Options Calibrate Map menu options You will be shown a dialog with calibration options Calibrate top left and bottom right by selecting TWO known points The easiest way to calibrate a map is to simply choose two points where their geographical location longitude latitude is already known These may be points you ve already captured using your GPS Calibrate THREE or more known points on the map This method allow you to select up to 9 known points to be used for calibration This method is useful if your map does not have horizontal and vertical latitude an
123. tandard protocol If your model is not specifically listed in the list box then NMEA will most likely work Mot Connected Fix O Views O Select how you are connected to the GPS If you attach via cable choose pod Cradle If your device works through the device infrared port choose Connection Stopped Infrared Ensure your GPS device is setup to communicate and match up the baud parity bits and stop bits settings Most if not all GPS devices use Parity N Bits 8 Stop 1 4800 is the most common baud rate Attach and turn on your GPS unit Ensure you can get a signal Most GPS units require a direct line of sight to the satellites Press the Connect button to test PathAway Manual Page 27 of 4 4 Apr 07 the GPS You should see the data stream messages flowing from the unit Once your position is fixed the longitude latitude elevation and UTC Universal Time Clock are displayed Press OK to exit the dialog Congratulations you re now ready to navigate with PathAway Press the satellite i icon to connect and disconnect from the GPS Tip You can also connect and disconnect the GPS by pressing the hard key 4 8 When you first connect the New Trip dialog will appear To accept the defaults Follow last route and record a new track press hard key 4 again to begin tracking with GPS Navigating with a GPS Now that you re connected to the GPS you can begin to travel At this point you should have acquired your own maps and install
124. tart or end of the active route Go to Start End of Track Moves location to the start or end of the active recorded track Find specific location Enter specific location coordinates lookup an Find Location address online find a point Once the location has been found you can center the map on it add it to a route or create a new point World Ma Display built in world map This is the default view if no maps are Hord ap installed or found at the current location PathAway Manual Page 51 of 4 4 Apr 07 Context Sensitive Popup Menus Tapping on PathAway screen brings up a context menu depending on the item selected Tapping on the map brings up the Map Popup Context menu Tapping on a dashboard item brings up the Dashboard Popup menu options Map Popup Menus y PathAway eS E 11 20 X 1 PE ar Tapping on the map brings up a context sensitive menu Tapping on an existing point will display the current location coordinates the closest point name and a menu of options The following menus are activated when the map is tapped on based on the condition The menus are organized into multiple layers for easy navigation The first menu is the Top Level Map Popup Menu Top Level Name Description Action Displays a screen showing detailed information about the location such as distance to ETA to etc es umentio tons Displays the geographic coordinates of the selected location Displays the name of the closest
125. thAway can also post your location to an http tracking service Web based Location Monitoring servers can track locations of PathAway handhelds We provide a web service to test and view locations sent from and to PathAway Retrieve Locations There are two methods for sending and retrieving locations SMS Simple Messaging Service or HTTP Both methods require that you have a wireless Remote Locations data handheld SMS communications requires that the device support Microsoft MAPI Mail services Most Phone Edition handhelds have this l Remote Settings capability For Http the handhelds must include capabilities to acquire data Options from the internet This includes via cellular data or WIFI If your PDA and Goto Active Remote separate cell phone have Bluetooth capabilities you can connect the two to Screens Goto Next Remote access the wireless data capabilities of the Cellular device Note PathAway i Goto Previous Remote Support does not provide technical support for obtaining data connections Tiew mra Auto Center Remotes w Enable Remote Tracking Send My Location Moves location to the start or end of the active route Retrieve Locations Moves location to the start or end of the active recorded track View or modify all retrieved remote locations See Remote gt Remote Remote Locations i Locations Dialog Remote Settings sire A Tracking modify remote tracking map display and user When multipl
126. ther handheld device Move To Move route database to and from expansion card Send to GPS Send route to Garmin GPS device Get from GPS Download route directly from a Garmin GPS device Import GPS LOC or PathAway pw files into PathAway databases Brings up a file selector Import dialog that allows you to select the file to import sil Exports the selected file to PathAway comma delimited format Brings up a file selector dialog that allows you to select the file to export to Export For tracks the default extension is pwtrk Routes is pwrte Points is pwpts Note do not export to a folder where PathAway has a registered folder A PathAway delimited file in these folders will be automatically imported when the program starts up PathAway Manual Page 78 of 4 4 Apr 07 Unsorted No sorting Sort by Name Sorts by name Sort by Date Sorts by creation date Sort by Transportation Mode Sorts by selected transportation mode name Sort by Location Sorts in order of closest proximity to current location Preferences Launches Track preferences dialog Options gt Routes gt Details For modifying the details of the route such as name transportation mode and ae Pathaway Phe of 2 9 23 ok individual points Nemes Lo Bracebridge to Port Carling Add Points Add points to route Launches the Point Record Editor Note Route points can also be added from the map view by selecting a point on the Transportation m
127. tly I E elevation reported is 707 7 meters actual elevation seen from DEM or MAP or other receivers is 649 meters correction value is 48 0 meters GPGGA 144347 099 4806 9547 N 00834 8330 E 1 06 1 8 707 7 M 48 0 M 0 0 0000 75 Note This correction value can be negative thus finally adding up to the elevation given The entire story can be found at http www gpspassion com forumsen topic asp TOPIC ID 10915 Add Subtract fixed Elevation value This option simply adds or subtracts the specified elevation value to the recorded elevation from the GPS receiver Use this option in cases where the elevation data is off by a fixed estimated amount and there is no correction value provided Enter a sign for negative numbers E Cancel Timer Comm PathAway can communicate with the GPS via a Timer or on an Interrupt Interrupt method is preferable if it works for your GPS device If you have been encountering difficulties with GPS connectivity you can set PathAway to use the Timer Based Communications as in Version 2 To set Timer Based Communications turn ON the setting for Timer Comm This will set the program to communicate on a timer rather than the new Interrupt based communications Disconnect if no response after X seconds If the GPS receiver is not responding turning this option on and setting the timeout value will cause the program to disconnect from the GPS if there is no response from it within the specified
128. tude Too Low GPS Status Warnings GPS Fix Acquired GPS Fix Lost Remote Location Notifications Location Send Notifications Location Send Successful Location Send Failed Location Receive Notifications Location Received Location Retrieve Failed Eg Cancel 4 Apr 07 r Pathway T ef dieu ok M I Le Options gt Preferences gt Alarm gt Configure Alarm TE cana i or Al Tri Proximit Set the distance threshold for the proximity and choose from one of the A v ePerrrer predefined alarm sounds or select a custom sound of your own Distance Fram Target 0 004 mi Distance from Target The distance value that must be reached in order to trigger the alarm Each trigger is different depending on the type For Sound Proximity and Turn Instructions the alarm will sound when you get closer than the specified target distance Of Off Track and elevation warnings you must be further away or above or below from this distance for the alarm to sound Sound Set the warning alarm sound Choose from the pre defined sounds or from a sound file of your choice Press the Play button to test the sound Options gt Preferences gt Routes s 49 PathAway e EER ER ok Ly Route Preferences Define preferences for navigating using routes Map Tracking alarm Route Poil 4 gt Route Warnings OFF Track Warning Off Track Warning Defines distance to right or left of route track you can On Track Width 0 0046040 mi
129. ucceeesseuneteeeeuueaseeseeeeuteeoeuuaueessegeantenss 99 Options gt Preferences gt CoO0l Suicidas 99 Options gt PrererenCes gt TIME rniret a a 100 Options gt Preterences Mabe a ds 100 Options gt Preferences gt Track IN cido id eae 101 Optliohs gt Preterenhees gt Ala Maa del ituet ne engaraa awh oe Sawada dia sBeeuraNaataaleeleds 101 Options gt Preferences gt Alarm gt Configure AlAriM cccceceee cece eee eeeeeeeeeeeeeeeeeeeaaeeeeeneeennnas 103 Options gt Prererences gt ROULCS ainia 103 ROULE Warning Serras E id ia cases MeN ede 103 ROUE INAVIGALION a corcciro dido tia a Oteo 103 Options gt Prererences gt Points ina doar a a E aaa ee 104 Options gt Preferences gt Colors amp LINES ccccccccsncceceecneceeueeceeueeeeeuaeceuueessaunaeeenageeusenseuuareegs 104 Options gt Preferences gt Colors amp Lines gt Line Style cee cece eee eeeeeeeeee sete ee eeeeeeeeeeeeeeeeeenes 105 Options gt Preferences gt Colors amp Lines gt Position Marker cccceeeeeeeeeeeeeeeeeeeeeeeeeeenegeeneens 105 Optlions gt Prererentces gt P acera ia A A AS 106 Options gt Preferences gt Pace gt AdVanced ccccccccnncccccconnnanancnannnnr carr rr 107 Opti0ns gt Preferences gt S5YSte Minsa dia 107 Options gt Preferences gt Hara KEYS iii A a A 108 Goto gt Find Location gt 0ptiOnS s s ssssssssasasssssssnnnsnsnsnnnnnnsnsnsnsnnnnnsnnnsnnununnununnnununnnnnnnno 109 Goto gt Find Location gt COOrdINAUES ii A ad 109 Cal
130. uratech at http pathaway com ttqv htm for more information 2 Map Datum You can also specify the source map datum used by the defined map This F PathAway e 42909 ok Map Details Calibration 0000 Type 3x3 Points Datum Calibration Database Options Maps E r a Pathaway fa 5 BEEE ok Fe I L Map Details Calibration allows you to convert coordinated of different datums to display correctly on all Type Top Left Botkom Right maps Refer to the Advanced Mapping Manual for more information on specific datums and how to set them up in PathAway PathAway Manual Page 91 of 4 eat Wigs Australian National Austria MS Australian Geod 66 Australian Geod 84 European 1950 Database Options Maps E 4 Apr 07 r q Pathaway er d as3a GD fd le La Options gt Maps gt Move To From Expansion Cards Selected Database From the a track route point or map database dialog Select the Move to Al Databases menu option From 4 Documents Pathway Move or copy Duplicate databases to and from expansion card To Storage CardPathaway Selected Database Copy or move the currently selected database to If the eee ese database is on the expansion card the Option is to move from the card to Handheld main memory All Databases Copy All Databases To and From expansion cards Overwrite Existing Delete and overwrite databases of identical name found in the de
131. vices Most Phone Edition handhelds have this capability For Http the handhelds must include capabuilities to acquire data from the internet This includes via cellular data or WIFI If your PDA and separate cell phone have Bluetooth capabilities you can connect the two to access the wireless data capabilities of the Cellular device Note PathAway Support does not provide technical support for obtaining data connections Sending your Location PathAway Manual Page 29 of 4 4 Apr 07 PathAway PRO provides the ability to send locations to others so they can see where you are Others can view your location directly on their handheld or via Web server There are two methods for sending location SMS Simple Messaging Service or HTTP Both methods require that you have a wireless data handheld These handhelds include any cellular data capable or Wifi enabled handheld If your PDA and separate cell phone have Bluetooth capabilities you can connect the two to access the wireless data capabilities of the Cellular device Note PathAway Support does not provide technical support for obtaining data connections To Send your location ensure you have a Wireless data connection and connect your GPS and acquire a fix of your current location Next select the main menu option Remote gt Send My Location 5 PathAway ar f 340 X n j Send My L Retrieve Locations Remote Locations Remote Settings Goto Active Remote Sc
132. wg Track 04 06 12 14 04 Goto Repositions the location to the start of the currently selected track The track will not be displayed unless it is the Active track or is checked to show Follow a Edit Points Edit track points in the Points Record Dialog cota Activate Edit Points Edit Points Points Details Allows editing of the track name mode of transportation Database Options Sections Close Returns to the current navigation screen Tracks Dialog Menus Name Description New Creates a new track PathAway Manual Page 80 of 4 4 Apr 07 Edit Points Duplicate Join Delete Beam Move To Send to GPS Get from GPS Import Export Unsorted Sort by Name Sort by Date Sort by Transportation Mode Sort by Location Preferences Edit Track points Brings up Database Record Edit Screen Duplicates the selected track Select the a tracking database Select the Join menu command It will go back to the Track database screen Then select the track to append to the previously selected one Press OK The Join will be performed Deletes the selected track Beam entire track database to another handheld device Move database to and from expansion card Send track to Garmin GPS device Download track directly from a Garmin GPS device Import GPS LOC or PathAway pw files into PathAway databases Brings up a file selector dialog that allows you to select th
133. will point in the direction to the next point in the route If no route is being followed you ll see only the cross hairs E You can set the style of direction pointer in the Position Marker Style dialog To do this click on the Position Marker button from the Lines amp Style Dialog In the Position Marker Style dialog you can choose the desired Direction Arrow style color and size of the marker For more emphasis on screen set the 3d Effect to create a shadow behind the marker A width 3D Effect Lee 3D Effect Sn ogaao El PathAway Manual Page 25 of 4 4 Apr 07 ES PathAway Er iaaa E Capturing Points on a Map Run the simulator until it stops at the town of Rosseau Let s say there is a marina close by that you d like to mark for future reference I e you re almost out of gas and can t afford to go searching for the nearest marina PEA re y Center the map at a shoreline near Rosseau Press the Add Point gt button La ee The Edit Point dialog is displayed Here you can enter information about this Port ookburn Ho point such as its name description icon position and elevation Position will as be already entered because the point has a location on the map If you were Bay Mord wr actually tracking using a GPS the true position and elevation would be i entered h E dp 0848880 El Alternatively you can tap and hold on a point anywhere on the map A menu Mas m n E ok d A P t
134. y shade 16 color 256 color or 64 million colors depending on capabilities of your device Maps can be as large as the user desires providing there is enough memory on the handheld Maps should be in longitude and latitude format Meaning the actual curvature of the map is stretched onto a flat surface and all longitude and latitude lines are straight Pace Pace Monitoring Monitor your current rate of speed against a pre defined rate Points Points are locations marked by the user Each point can be identified by a name icon and description The icon you choose for your point will be displayed on the map In PathAway points are stored in the Points database You make create multiple points databases to store points To Create and Edit these databases go to the Points Dialog and select Options Edit Databases Proximity While traveling PathAway will display the points on the map that are in close proximity If following a track the distance to the closest point on the track and the distance to the end of the track are displayed PathAway Manual Page 38 of 4 4 Apr 07 Simulate Simulates a route by moving the map to points along the route in sequence until the end of the route Use the simulate to verify routes you ve created or to review tracks after they ve been recorded Remotes Refers to locations acquired via Remote Tracking features Remotes can be captured via retrieval from a Tracking Server or directly from oth
135. you You can even change the look of the current Position Marker by selecting between 3 different styles Line Lo Next Point Active Route Set the color and width of the Active route line Can set arive Waca Olde Te eo whether to show each route point mark as well Brings up Line Style dialog Dashboard Other Routes Set the color and width of the non active Route lines These are shown when the preferences option Show All Tracks is on Can set Point Labels whether to show each route point mark as well Brings up Line Style dialog Line to Next Point Set the color and width of the line from the current Position Marker position to the next point on the route These are shown when the preferences option Show All Tracks is on Can set whether to show each route point 3D Effect mark as well Brings up Line Style dialog ok cancel or Active Track Set the color and width of the Active track log line Can set whether to show each track point mark as well Brings up Line Style dialog F a A A E E Other Tracks Set the color and width of the non active Track lines These are shown when the preferences option Show All Tracks is on Can set whether to show each track point mark as well Brings up Line Style dialog Dashboard Text Background Change the display color of the dashboard text and background Point Labels Text Background Change the display color and background of the point label text PathAway Manual Page 104 of

PathAway GPS 4 - Professional Edition

Contents

Download Pdf Manuals

Related Search

Related Contents