TVRMobile V2.0 User Manual
Contents
1. want to delete and press the name until the Hint Delete device pop up dialog box appears Hint Delete device Demo01 Confirm Cancel 2 Tap Confirm The device disappears from the list Live view Once the parameters of the device have been configured in TVRMobile you can access live video directly manage the device alarm outputs as well as control PTZ cameras See Figure 1 on page 8 for the live view screen Up to 16 cameras can be viewed live at the same time If a selected device has more than 16 cameras only the first 16 cameras will be displayed To enter live view tap gt and select The live view interface appears see Figure 1 Note The display format is one video tile by default TVRMobile V2 0 User Manual Figure 1 Live view interface Icon Description Fo Capture a video snapshot of the selected camera image Switch between main stream and substream for the selected camera G Stop all live views 2 Start stop bi directional audio 4 PTZ control 9 R Enable disable alarm output management Start live view 1 Inthe live view interface tap to display the list of devices available 2 Select the desired devices You can either Tap the check box of a device with associated several cameras to select all of its cameras Or Only tap the check box s of the desired cameras associated with a device 8 TVRMobile V2 0 User Manual E a a a2. 5 interlogix TVRMobile V2 0 User Manual P N 1070644A REV 1 0 ISS 20AUG13 Copyright Trademarks and patents Manufacturer Contact information 2013 UTC Fire amp Security Americas Corporation Inc Interlogix is part of UTC Climate Controls amp Security a unit of United Technologies Corporation All rights reserved The TruVision and UltraView names and logos are trademarks of UTC Fire amp Security Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products UTC Fire amp Security Americas Corporation Inc 2955 Red Hill Avenue Costa Mesa CA 92626 5923 USA Authorized EU manufacturing representative UTC Fire amp Security B V Kelvinstraat 7 6003 DH Weert The Netherlands For contact information see www utcfireandsecurity com or www utcfssecurityproducts eu Content Introduction 4 Overview 4 system requirements 4 Software setup 4 Installing the TVRMobile app onaphone 4 Login 5 Create auser 5 Login 5 Main menu icons 5 Device management 6 Devices that can be connected 6 Add a device 6 Modify adevice 7 Delete adevice 7 Live view 7 Start live view 8 Stop live view 9 Favorite devices and cameras 9 Full screen live view 10 PTZ control 10 Set a preset 11 Call up a preset 11 Playback 11 Start playback 12 Stop playback 12 Full screen playback 12 Relay outputs 13 Configuration 13 Passwo
3. Call up a preset 1 In PTZ mode move the selected camera view to the desired position 2 Tap The following dialog box appears 3 Enter the preset number It can be between 1 and 256 4 Tap Call to move to the preset position Playback You can search recorded video files on the remote storage device for playback Drag the timeline bar to modify the playback time TVRMobile V2 0 User Manual 11 Figure 2 Description of the playback interface Timeline 201 3 0 08 1 4 56 30 Capture snapshot Pause playback Stop playback Start playback 1 2 Tap to display the list of devices available 3 Tap the start and end date time nodes to set the start and end date and time for playback search 4 Select a device and a camera for playback 5 Tap Start playback to start playback Stop playback There are two ways to stop playback You can Tap ES to stop playback Or Drag the playback window upwards to the top of the screen A it icon appears When it changes to W release the window It is then deleted Full screen playback During playback rotate the phone to landscape position to get full screen mode Press the playback toolbar and drag to reposition it TVRMobile V2 0 User Manual Relay outputs You can easily enable disable up to four relay outputs To enable disable relay outputs 1 In the live view interface tap and select M The relay output buttons appe
4. a E amp a a amp a 3 Tap Start live view to start live viewing from the selected camera s Stop live view There are two methods to stop live view Stop all cameras Tap IR to stop live view for all cameras Stop a specific camera Tap and hold the live view screen of the desired camera This D icon appears at the top of the screen Drag the selected camera s screen upwards until the icon changes to 4 and release the camera screen Favorite devices and cameras You can group the most important or frequently used devices and cameras ina Favorites folder so that for example they can be easily and quickly accessed in live view More than one device can be saved in a favorite group To configure favorite cameras 1 Inthe live view interface tap to display the list of devices available 2 Check the desired devices You can either Check a device to select all of its cameras Or Check only specific cameras associated with a device 3 Tap to add the selected cameras to the Favorite group TVRMobile V2 0 User Manual Favorites Name Confirm Cancel 4 Inthe pop up dialog box enter the name of the Favorite group 5 Tap Confirm to save the settings The favorite group is listed under devices and is identified by a star in its device icon test Demo01 Demo41 To delete a device from the favorite list 1 Inthe live view interface tap to display the list of d
5. ameras TruVision TVD N TVD M IP dome cameras UltraView UVP N UVP M IP PTZ cameras Add a device 1 Tap E and select to enter the Device Management interface 2 Tap mato add anew device Device Name Device Register Mode ezDDNS gt Server address www tvr ddns net Host Name User Name admin Password Camera No 3 Enter the name of the device to be linked such as a TruVision DVR or TruVision IP cameras The name can have up to 16 alphanumeric characters Default name is Device01 4 Under Register Mode select either ezDDNS or IP Domain ezDDNS When the device is registered in the ezDDNS server you need to enter the registered ezDDNS server address and device domain name IP Domain Manually access the device using a fixed IP address or a domain server You need to edit the IP address or domain address 5 Enter the user name and password if required 6 Tap to confirm the settings The device is added to the device list TVRMobile V2 0 User Manual 7 Tap to exit and return to the previous page 8 Tap E to access another main menu icon Modify a device 1 In the Device Management interface select the device you want to modify The Device Information screen appears showing the device parameters 2 Tap Fito modify the parameters of a device Enter the new parameter values 3 Tap to confirm the settings Delete a device 1 In the Device Management interface select the device you
6. ar ae 2 Tap the desired relay outputs to enable BS or disable Configuration Password protection The application does not have password protection by default By setting up password protection you ensure that only persons knowing the password can access the TVRMobile application To enable password protection 1 Tap and select to enter the Configuration interface 2 Tap Turn Password On to enter the password interface 3 Enter the password information and tap to save the settings TVRMobile V2 0 User Manual 13 To disable password protection 1 Tap E and select E to enter the Configuration interface 2 Tap Turn Password Off to enter the password interface 3 Enter the password information and tap E to save the settings To modify a password 1 Tap E and select E to enter the Configuration interface 2 Tap Modify Password to enter the password interface 3 Enter the password information and tap E to save the settings Update software When there is a new version of the TVRMobile application available in the App Store the software will automatically prompt you to update the software You can update the software immediately when prompted or update it later To update the software 1 Tap E and select to enter the Configuration interface 2 Tap Software Update 3 Tap Confirm on pop up notification This will take you to the app store 4 Update with the new version of the app Get h
7. elp Online instructions for using the application can also be found under Configuration gt Help you continue to have problems please contact your local supplier Troubleshooting 1 Which devices are supported by the TVRMobile software A device requires H 264 MPEG 4 or MJPEG video compression to be compatible with this software Examples of devices that can be used with this software are embedded DVRs NVRs IP cameras and IP speed domes 2 Why does the mobile client software prompt Login failed when trying to access the device via Wi Fi Please check the network settings of the device being accessed It is also important to ensure that the device is always online and accessible 14 TVRMobile V2 0 User Manual 3 Why does the mobile phone respond slowly during live view and the video images freeze This problem may be due to the lower performance of your mobile device Try reducing the number of cameras viewed at the same time or decreasing the frame rate and resolution See Table 4 below for guidelines Table 4 Video recommendations Resolutions Recommend number of Recommend frame rate cameras CIF 1 8 fos or lower QCIF 4 8 fos or lower TVRMobile V2 0 User Manual 15 TVRMobile V2 0 User Manual
8. evices available 2 Press the device to be deleted until the Delete pop up dialog box appears Hint Delete the favorites Test Confirm Cancel 3 Tap Confirm to delete Full screen live view When using live view in multiview format you can easily watch a specific camera image in full screen view by double tapping on the desired image Double tap again to return to the multiview format PTZ control In live view select the camera for PTZ control and tap ie The PTZ control panel appears see Table 3 on page 11 for a description of the icons The icon changes to i Q Note If live view is in multiview mode first select the camera for PTZ control and then tap ue The selected camera becomes full screen Move your finger on screen to pan left right and tilt up down camera movement Pinch you fingers apart or together to zoom in or out Quit PTZ control mode by tapping Me 10 TVRMobile V2 0 User Manual Table 3 PTZ icon description Tap to change between main stream and substream Tap to adjust the brightness level by adjusting the iris 4 Tap to zoom in or out Tap to set and call up a preset Tap focus in or out Set a preset 1 In PTZ mode move the selected camera view to the desired position 2 Tap The following dialog box appears 3 Enter the preset number It can be between 1 and 256 4 Tap Set to save the preset setting
9. rd protection 13 Update software 14 Get help 14 Troubleshooting 14 TVRMobile V2 0 User Manual Introduction Overview The TVRMobile is an Android and iPhone application that can be used over a wireless network to remotely view live video play back recorded files and control alarm outputs from DVRs NVRs IP cameras and PTZ cameras It can also be used to control PTZ cameras Once installed on your mobile device you can easily log on to the front end device via Wi Fi 2G 3G or 4G If there is no public IP available you can use a dynamic name or by forwarding ports to the public IP router System requirements Table 1 TVRMobile system requirements Software Android Phone Android OS V2 3 or higher iPhone iOS 4 3 or higher Maximum number of 100 devices that can be added Network stream Main stream and substream Frame rate 2 to 8 fps depending on the performance of the mobile device Resolution QCIF up to 5 megapixels if supported by the device Stream type Video and audio Bit rate 32 Kbp to 16 Mbps depending on the network environment Software setup The phone must be connected to the internet before installing the TVRMobile application Installing the TVRMobile app on a phone 1 Go to the Android Market or the Apple Store web site and search for the TVRMobile application 2 Download tt 3 On your phone s home screen tap 0 to open the app 4 TVRMobile V2 0 User Manual Log in Create a u
10. ser 1 Tap on the home screen to open the TVRMobile application 2 Enter your user name 3 Enter your password and confirm it Tap Register The live view screen opens Note See Password protection on page 13 for further information on managing passwords Log in 1 Tap on the home screen to open the TVRMobile application 2 Enter password if required The live view screen opens Main menu icons The main menu icons are always easily available Simply tap the Eicon on the top of the screen to display them Table 2 Main menu icon description Live view Access live view control PTZ manage relay outputs enable disable bi directional audio Q Remote Playback Playback recorded video a m Devices Display the device list add delete modify devices view device information Configuration Configure passwords and update software Access Help TVRMobile V2 0 User Manual 5 Device management The device list is empty by default You must first add the required devices to the TVRMobile device list before you can access them Once the device has been successfully added the app obtains the device s camera information Note Up to 100 devices can be added to the application Devices that can be connected This app provides support for following devices TruVision TVR 10 11 40 41 60 digital video recorders TruVision TVN 20 21 50 network video recorders TruVision TVC N TVC M IP box c
Download Pdf Manuals
Related Search