Solder Paste Mixer User Manual
Contents
1. 1 4 Solder Paste Mixer User Manual Revised 09 01 11 2 4 Contents 1 Function 2 Specifications 3 Control Panel Introduction 4 Operating Method 5 Operation Notes Revised 09 01 11 1 Function This automatic solder paste mixer is easy to operate and high efficient The solder paste container remains closed during use so the solder paste won t be oxidized and no moistened Thanks to its self rotation and centrifugal rotation the mixer will warm up the solder paste soon after the container being taken out of freezer The solder paste will be mixed evenly and ready for use in minutes instead of in hours 2 Specifications Power 220V 60HZ Power Consumption 45W Dimensions mm L 400x CW 400x CH 400 Weight 32Kg Number of Jars mixed Up to 2 jars 3 Control Panel Introduction l START Start Button Motor starts to work after this button is pressed the top cover needs to be closed 2 STOP Stop Button The machine is manually stopped by pressing this button After mixing time in minutes is entered machine will automatically stop when time is up This stop button is for manually stopping the machine before set time is up 3 Four up and down arrows for time adjustment The up and down button to the left can be pressed to increase or decrease the number of minutes The up and down button to the right can be pressed to increase or decrease the number in 1 10 minutes Machine will automatically stop a2. fter time is up The set mixing time will be automatically saved for next use of the mixer 4 Operating Method 1 Open the lid 3 4 Revised 09 01 11 2 Place the solder paste jar in the fixture Please seat the solder paste jar to the bottom of the cup shape fixture If mixing two jars then place one solder paste jar to a fixture and the other jar to the other fixture If only mixing one jar after placing the solder paste jar to a fixture you need to place the 500 gram balancing weight jar provided by factory to the other fixture 3 Close the lid 4 Set the mixing time 5 Press START Button to start 5 Operation Note 1 Do not leave machine in humid hot environment Keep the machine surface clean 2 Be careful to move the machine The machine should be placed on a flat horizontal and clean surface 3 If the mixing time is set to a satisfactory time you do not need to change it inmext use of the machine You only need to press the Start button 4 Do not stack heavy item on top of the machine 5 Do not take theysolder paste janout until the machine is fully stopped 6 The turn axis is sealed and does not need lubrication often 4 4 Revised 09 01 11
Download Pdf Manuals
Related Search