Home

Agfaphoto DC-633xs User Guide Manual pdf

1. cannot upload Connection failure Check that all cable connections images to my are secured computer Camera Driver is not You need to install the camera driver for installed Windows 98SE systems cannot run the Conflict with another If you have another camera installed on your AFGAPHOTO camera driver or computer remove it and its driver completely Driver capture device from your system to avoid conflicting with your digital camera My CD Installation The auto installation Go to the computer desktop Right click on Wizard does not file is switched off My Computer Click Properties Select work or the CD ROM is Device Manager Double click on CD disconnected ROM double click on CD R normally the manufacturer s name Click on Settings Ensure both Auto insert notification and the disconnect are ticked If you change the settings the computer will ask you to restart your PC Click Yes Downloaded From camera usermanual com Agfa Manuals For Windows and Macintosh Users Symptom Problem Solution cannot activate my digital camera by pressing the QD button Insufficient battery power or battery is missing Recharge your battery or insert your battery into the camera Battery door is not closed Make sure the battery door is securely closed Camera suddenly powers off Auto Power Off function i
2. 4 Recording Video Clips Recording Video Clips Use the Video mode to record video clips with audio Video Time Elapsed Recording Indicator 1 Press the mode button to set the camera mode to N 2 Frame your subject using the LCD screen 3 Press the Shutter button to start recording Recording automatically stops when the current memory is full While recording the red icon will appear on the LCD screen NOTE The zoom feature is not available during recording video clips The maximum length that the camera can hold at either 320 x 240 or 640 x 480 pixels depends on the memory capacity The length of clips may vary with scene complexity The length of clips may vary with scene complexity Downloaded From camera usermanual com Agfa Manuals 45 Setting Video Image Size Image Size refers to the number of pixels in a digital video clip Video clip quality depends on the file resolution that the camera applies when the video clip is recorded Higher resolution makes better quality while occupying more memory space 1 Press the mode button to set the camera mode to a Press the M button to access the main menu Press C or GA button until IMAGE SIZE option is highlighted N 3 Press the button to access the IMAGE SIZE submenu 4 Select the resolution using the gt or gt button Press the button to confirm your choice and exit from the menu window ol Here are the appr
3. 4 All the pictures and video clips are in the directory folder Highlight the pictures and video clips and drag them to a folder of your choice NOTE This drive name will vary from different version of Windows OS system For Macintosh Users NOTE For Mac users directly plug in the camera no need to install the driver 1 Connect the camera to Mac via the USB cable the systems will automatically recognize the MASS STORAGE drive System will automatically create a Mass Storage named Unlabelled NOTE This drive name will vary from different version of Mac OS system 2 Double click the folder Unlabelled to enter sub folder DCIM 3 Double click the folder DCIM and then any sub folder inside 4 You can copy the pictures and video clips from this directory folder Downloaded From camera usermanual com Agfa Manuals 75 10 Troubleshooting Problems Troubleshooting The troubleshooting guide is designed to help you If problems continue please contact customer support Details are provided under Getting Help For Windows Users Symptom Problem Solution receive an error AFGAPHOTO Driver Shut down all other applications and attempt message when does not load to reinstall the driver am installing AFGAPHOTO Check to see if the USB in your BIOS is acti Driver vated Please refer to plawa web site for how to activate the USB in the BIOS
4. Press the M button to access the main menu AUTO Press the C or lt gt button to select the ISO option 150100 150200 Select the ISO speed using the 9 button The currently selected option will be accessed 50400 and takes effect immediately Press the button to exit from the function bar or press the Q button to return to the previous menu Ie In the same lighting condition the higher ISO value it is the faster the shutter speed will be The camera s sensitivity is automatically changed by Download different lighting value or subject brightness NOTE Increase in ISO value affects image quality with more noise Use as low an ISO value as possible ed From camera usermanual com Agfa Manuals 39 Setting White Balance for Pictures Selecting the right type of white balance can help to make the colors of a subject appear more natural under the type of lighting environment 1 Press the mode button to set the camera mode to gg 2 Press the M button to access the main menu 3 Press the C or button to select the WHITE BALANCE option 4 Press the button to enter submenu 5 Select the right type of white balance using the ZO or C button 2816 X 2112 SUPER FINE fo AUTO tam AUTO emp AUTO zex DAYLIGHT CLOUDY TUNGSTEN FLUORESCENT 6 The current tly selected option will be accessed and takes effect immediately Press the 0x button to exit fr
5. Restoring Default SettingS cccccccsssssssseesssccsssssssseessesssssssssene e Switching the Information Display and LCD Screen On and Off 3 Taking Pictures Taking Pictures in Normal Mode Taking Pictures in Different Scene Shooting Modes Taking Pictures in Close Up Mode Setting Flash Mode Setting the Image Size and Compression Setting Exposure Compensation for Pictures e Changing the ISO Speed Setting White Balance for Pictures Setting the Sharpness Setting Light Metering Setting Self timer DownlgatlP PPOR Uiiifera usermanuat com Agfa Manuals 4 Recording Video Clips Recording Video Clip Setting Video Image Size Setting White Balance for Video Clips 5 Managing Pictures and Video Clips e Reviewing Pictures e Playing the Video Clip Protecting or Unprotecting Running a Slide Show Deleting Picture s and Video Clipts 1B Print SOttinG issrc2eacs ssedharessesestionsiastistactitvelios a S EEN About PictBridge e About DPOF 7 Using Memory Card Using memory card Formatting Memory Copying Pictures and Video Clips to Memory Card 8 Installing the Software Onto a Computer Installing the Software Software Included with Your Camera Computer System Requirements Uninstalling AGFA
6. backlighting indirect indoor lighting a dark background and so on 1 Press the mode button to set the camera Se mode to E T 2s s x 2112 E SUPERFNE 2 Press the M button to access the main ce o menu E AUTO 3 Press the button to enter Exposure _ Asay submenu 4 Adjust the exposure compensation value using the A gt or GY button 5 Press the button to confirm The currently selected option will be accessed and takes effect immediately NOTE E A higher EV is best used for light colored subjects and backlit subjects A lower EV is best for dark colored subjects and for shooting outdoors on a clear day When shooting under very dark or very bright conditions you may not be able to obtain satisfactory results even if performing exposure compensation Downloaded From camera usermanual com Agfa Manuals Changing the ISO Speed This function enables you to change the camera s sensitivity to light by selecting different ISO values ISO is a measure of how quickly your camera reacts to light The the ape the di higher the ISO value the less light needed to make an exposure allowing same exposure to be achieved with higher shutter speeds or smaller rtures In a digital camera higher ISO value allows higher shutter speed at expense of mottle or grain appearing in the final picture Press the mode button to set the camera mode to CB 2816 X 2112 SUPER FINE AUTO
7. camera DELETE PROTECT Turn on the camera SLIDESHOW _COPYTOCARD Set the camera to the Playback mode Press the M button Press C or O button to select COPY TO CARD Press the button to enter the submenu Press C 2 or gt button to select COPY or CANCEL NOTE With a memory card inserted into the camera the card memory has a higher priority over the internal memory The selected picture or video clip can be only copied from internal memory to the memory card Downloaded From camera usermanual com Agfa Manuals 8 Installing the Software onto a Computer Installing the Software For Windows Users IMPORTANT e Please backup all the necessary data before any driver and software installation The CD ROM is tested and recommended to use under English Windows OS Please restart the computer after installing the software r IMPORTANT For Windows 98SE Windows 98SE needs to install your digital camera Driver for Mass Storage function After the installation please restart the Windows before connecting the camera to the PC IMPORTANT For Windows Me 2000 XP Directly plug in the camera to transfer and play the pictures and video clips No need to install the driver ill IMPORTANT To experience higher performance in graphics and sound when you are watching video clips on your PC it is recommended to install the DirectX ver 9 0 or ab
8. camera usermanual com Agfa Manuals Restoring Default Settings Default setting can be restored by the following steps For more guidelines please see Camera Default Settings on page 86 1 Follow the guidelines in Setup Menu on page 16 PT to access the SETUP menu ae 2 Select the DEFAULT SETTING option using the uss MODE lt 2 and C button DEFAULT SETTING p gt hida 3 Press the button 4 Select OK using the button Press the x button to restore default settings and exit from the menu window NOTE Selecting CANCEL will cancel the operation and exit from the menu window Downloaded From camera usermanual com Agfa Manuals 25 Switching the Information Display and LCD Screen On and Off The LCD Screen can be changed by pressing the IDI button LCD screen on with basic LCD screen on with basic LCD screen on with information uu nformation and a histogram information display off Press J 10I Downloaded From camera usermanual com Agfa Manuals Press Press DI ni LCD screen on with basic LCD screen on with basic LCD screen on with information display information and a histogram information display off t Press J io In mode Press gt lol p 2006 01 01 12 00 00 LCD screen on with basic LCD screen on with information display information display off Press J DI Downloaded From camera usermanual com Agfa Manuals 27 3 Tak
9. printers The LCD screen Dovnload howa these settings shat are avaliable or the urentiy connected printer Specifying the Number of Copies Press the left or right button to specify the number of copies from 1 to 99 you want to print for the selected image or all images O ammo DEFAULT DEFAULT i DEFAULT NOTE 1 DEFAULT 01 is the default setting Selecting Print Layout 1 Press the lt gt button to select N UP A gt f d LAYOUT R l DEFAULT Press the or button to specify the i DEFAULT number of printed images on a page DEFAULT vabi DEFAULT Print settings differ according to the printer model N UP Print 1 to 256 pictures on one piece of paper BORDERLESS Print right to the edge of the page INDEX PRINT Specify the number of printed images on a page Setting the File Name On Off 1 Press the lt gt button to select FILE DEFAULT lt DEFAULT 7 DEFAULT NAME 2 Press the Q or 6 button to select DEFAULT or OFF a d m DEFAULT ww and DEFAULT Print settings differ according to the printer model OFF Print without the file name Downloaded From camera usermanual com Agfa Manuals Setting the Date Stamp On Off 1 Press the gt button to select DATE STAMPING 9 DEFAULT 2 Press the or button to select DEFAULT DEFAULT ON or OFF a DEFAULT py DEFAULT Ma boxy DEFAULT Print setti
10. with high color 16 bit graphic capability or higher CD ROM drive Standard mouse and keyboard Stereo speakers For Macintosh Users PowerPC G3 or higher Processor Mac OS Version 9 2 X USB Port 128MB RAM 256 MB recommended 500MB free disk space Color monitor with high color 16 bit graphic capability or higher CD ROM drive Standard mouse and keyboard Stereo speakers Downloaded From camera usermanual com Agfa Manuals Uninstalling AGFAPHOTO Driver PC Only For Windows 98SE Users NOTE The following driver uninstall procedure is for Windows 98SE users only because only Windows 98SE needs to install the digital camera driver 1 Open Add Remove Program Properties in Control Panel and select AGFAPHOTO program then click Add Remove 2 The following dialog box appears click OK to confirm removing the camera driver 3 The uninstallation program runs automatically please restart your computer when it is finished Add Remove Programs Properties 2 x Instal Uninstall windows Setup Startup Disk To install a new program from a floppy disk or CD ROM drive click Install Do you want to completely remove the selected application and all of its components The following software can be automatically removed by Windows To remove a program or to modify its installed components select it from the list and click Add Remove Intel R PRO Ethernet Adapter and So
11. 01 01 7 Press the Downloaded From camera usermanual com Agfa Manuals Setting Auto Power Off The camera is equipped with a power saving operation to conserve battery power You can change the power saving setting with the following steps 1 Follow the guidelines in Setup Menu on page 16 to access the SETUP menu 2 Select the AUTO OFF option using the C and lt gt button FORMAT DATE TIME AUTOOFF 3 Press the button to access the AUTO OFF submenu 4 Specify the automatic power off period using the O or button Press the x button to confirm your choice and exit from the menu window 1 MINUTE 3 MINUTES The camera is designed to switch off automatically to save battery life after the specified period of inactivity OFF The power saving function is not active NOTE Auto power off is automatically disabled under any one of the following conditions While the camera is recording a video clip While the camera is running a slide show While the camera is connecting to PC printer Downloaded From camera usermanual com Agfa Manuals 19 Setting the Beep Sound On Off The beep sound can be turned on and off in the SETUP menu When the beep sound is turned on the camera will beep when you press the buttons 1 Follow the guidelines in Setup Menu on page 16 EY to access the SETUP menu FORMAT 2 Select the BEEP option using the gt SRTA A and lt gt
12. 36 1GB SD 320 x 240 0 38 48 E NOTE Scene complexity affects a picture s file size For example a picture of trees in autumn has a larger file size than a picture of blue sky at the same resolution and quality setting Therefore the number of pictures and length of video clips you can store on a memory card may vary The time format is XX YY ZZ XX is hours YY is minutes ZZ is seconds Downloaded From camera usermanual com Agfa Manuals Camera Default Settings camera Wede O pesepten OO seraan USB Mode MSDC Downloaded From camera usermanual com Agfa Manuals 85 Tips Your Safety amp Maintenance Your Camera should only be operated within the following environmental conditions 32 104 Fahrenheit 0 40 Celsius 15 90 relative humidity non condensing Battery life or image quality may be affected outside these conditions A Camera Cautions NEVER immerse any part of the Camera or its accessories into any fluid or liquid ALWAYS disconnect the Camera from your PC before cleaning it ALWAYS remove dust or stains with a soft cloth dampened with water or neutral detergent NEVER place hot items on the surface of the Camera NEVER attempt to open or disassemble Camera as this will affect any warranty claim Regulatory Information FCC Notice This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device ma
13. P For Macintosh Users Mac OS 9 2 X Downloaded From camera usermanual com Agfa Manuals 81 Capacity of SD Card Resolution Quality 16 MB Internal Memory 32 MB SD 64 MB SD 2816 x 2112 Super Fine 4 Fine 9 Normal 16 2304 x 1728 Super Fine 9 Fine 15 Normal 26 2048 x 1536 Super Fine 12 Fine 19 Normal 33 1600 x 1200 Super Fine 21 Fine 33 Normal 54 640 x 480 Super Fine Fine Normal Downloaded From camera usermanual com Agfa Manuals Resolution Quality 2816 x 2112 Super Fine Fine Normal 2304 x 1728 2048 x 1536 Super Fine Fine Normal Super Fine Normal 1600 x 1200 Super Fine Fine Normal 640 x 480 Downloaded From camera usermanual com Agfa Manuals Super Fine Fine Normal 83 Recordable Video Length SD Card Resolution Video Clips Length 16 MB Internal Memory 640 x 480 0 00 07 32 MB SD 640 x 480 0 00 23 64 MB SD 640 x 480 0 00 46 128 MB SD 640 x 480 0 01 33 256MB SD 640 x 480 0 03 12 512MB SD 640 x 480 0 06 26 1GB SD 640 x 480 0 12 45 16 MB Internal Memory 320 x 240 0 00 21 32 MB SD 320 x 240 0 01 10 64 MB SD 320 x 240 0 02 22 128 MB SD 320 x 240 0 04 43 256MB SD 320 x 240 0 09 44 512MB SD 320 x 240 0 19
14. PHOTO Digital Camera Driver PC Only 9 Transferring Pictures and Video Clips to a Computer Before you Transfer Pictures Connecting the Camera to Your Computer via USB Cable Transferring Pictures and Video Clips via USB Cable 10 Troubleshooting PRODI sis scoscsisssssssinssssssisssesssdessasnadssssa GindtsasaissanedGlestenaissmattieasbieonaioinne LO a TIrOUDISSHhGOLI NO as cis sszsSassecvysscsonctonnsdaeashecelsherecdosaesdiceobeepebeensbasssuesscdesterdanadhusscbenschecsidadsituossise 76 11 Getting Help a AGFAPHOTO Online Services Downloaded From camera usermanual com Agfa Manuals ArcSoft Software Help 12 Appendix Technical Specifications e Capacity of SD Card Camera Default Settings Tips Your Safety amp Maintenance Reg latory Information i 4 ai aa danke zn bi Gan Ren nBd bin K R k 86 Downloaded From camera usermanual com Agfa Manuals 1 Getting Started Designed to be the flagship for AFGAPHOTO digital cameras this AFGAPHOTO digital camera has a 2 4 inch color LCD for viewing images Your camera is the perfect choice for the photographer looking for point and shoot simplicity with excellent performance and a variety of features Your camera has these features Aglass lens system for well exposed sharp pictures from 3 9 inches 10 cm to infinity Your camera has 3X optical zoom and 4X digital zoom modes 9scene shooting mode
15. Press the M button to access the main menu 2 Press the C 2 or gt button to select the SETUP option Downloaded From camera usermanual com Agfa Manuals NORMAL AVERAGE AUTO SETUP DATE TIME AUTO OFF BEEP FREQUENCY avy 1 2 3 Press the button to access the SETUP submenu 4 Use the C or Q3 buttons to select a setup option and then press the 6 button to enter the next submenu for that particular option FORMAT page 67 DATE TIME page 18 AUTO OFF page 19 BEEP page 20 FREQUENCY page 21 LANGUAGE OD gt page 22 DATE STAMP page 23 USB MODE page 24 DEFAULT SETTING page 25 avr 2 2 Downloaded From camera usermanual com Agfa Manuals 17 Setting the Current Date and Time 1 Follow the guidelines in Setup Menu on page 16 FORMAT to access the SETUP menu _ 2 Press the button to access the DATE TIME XER submenu aav 1 2 Setting the Date Format DE 3 Press the C or QA button to select DATE DATE FonMAT DATE SETUP FORMAT 4 Press the 6 button 5 Press the C 2 or button to select the Le cal desired setting pp MM vy MM DD YY button ea 6 Press the x Setting the Date and Time 3 Press the C 2 or O button to select DATE a SETUP DATE FORMAT 4 Press the 9 button DATE SETUP 5 Press the gt or gt button to adjust the value in the field 6 Press the button to switch to the next field DD MM YY button 00 00 2006 01
16. User manual AGFAPHOTO Product Overview Shutter button Flash Focus lamp Self timer LED 2 Power on LED Power button Buzzer Lens Microphone CORES 99 NI 01S 0 N a DC s NS 2583338 Ibi Nr 9 Zoom out Thumbnail button 10 Zoom in button 11 Mode button 12 LCD Screen 13 Menu button 14 Wrist Strap holder 15 Flash LED 16 Power LED 17 LCD Screen on off button 18 Left button 19 OK button 20 Flash Up button 21 Right button Self timer button 22 Close Up Down button D OOG B B 8 88 Downloaded From camera usermanual com Agfa Manuals 23 Battery door SD card slot 24 USB port 25 Tripod mount Downloaded From camera usermanual com Agfa Manuals Table of Contents 1 Getting Started Camera Package Contents Installing and Removing the Battery Using Your Battery Checking the Battery Level Turning the Camera On and 2 Camera Setting Checking Camera Status 12 e Camera Modee How to Navigate Menus Setup Menu Setting the Current Date and Time Setting Auto Power COff Setting the Beep Sound On Off Selecting the Frequency Setting the Display Language Setting the Date Stamp On Off Changing the USB Mode Between aa
17. bility the following standards were applied e EN 55022 class B 1998 A1 EN 55024 1998 A1 2001 A2 2000 A2 2003 2003 EN61000 3 2 2000 IEC 61000 4 2 2001 EN61000 3 3 1995 A1 2001 IEC 61000 4 3 2002 IEC 61000 4 4 2004 IEC 61000 4 5 2001 IEC 61000 4 6 2003 A1 2004 IEC 61000 4 8 2001 IEC 61000 4 11 2004 The device is marked with CE Logo r US 1106 Downloaded From camera usermanual com Agfa Manuals part No 0M3564US001 Dowmoatet Er ont Carney erianual com Ag
18. ble must be used with this unit to ensure compliance with the Class B FCC limits Under the environment with electrostatic discharge the product may malfunction and require user to reset the product WEEE Notice Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste Instead it is your Downloaded From camera usermanual com Agfa Manuals 87 responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste equipment for recycling please contact your local city office your household waste disposal service or the shop where you purchased the product Declaration of Conformity We herewith confirm the following designated product DC 633xs has been tested and found to comply with the requirements set up in the council directive on the approximation of the low of members states relating to the EMC Directive 89 336 EEC amended by 92 31 EEC amp 93 68 EEC For the evaluation regarding to the electromagnet compati
19. button TERR T hee 3 Press the button to access the BEEP submenu 4 Select ON or OFF using the C or C button x button to confirm your choice and exit from the menu window Downloaded From camera usermanual com Agfa Manuals Selecting the Frequency The correct frequency for your indoor shooting scence makes better photos 1 Follow the guidelines in Setup Menu on page 16 to access the SETUP menu S 2 Select the FREQUENCY option using the C and peda button BEEP FREQUENCY gt 3 Press the 6 button to access the FREQUENCY 44y 1 2 submenu 4 Select the frequency of your own country using the or Q button Press the K button to confirm your choice and exit from the menu window NOTE EZ 50 HZ For European users 60 HZ For United States users Downloaded From camera usermanual com Agfa Manuals 21 Setting the Display Language Different languages can be selected for the menu to suit your preference 1 Follow the guidelines in Setup Menu on page 16 s ose to access the SETUP menu LANGUAGE gt 2 Select the LANGUAGE option using the C and TETELA button avr 2 2 3 Press the button to access the LANGUAGE submenu ENGLISH DEUTSCH 4 Select the language you prefer using the C or FRAN AIS lt button Press the x button to confirm your eee choice and exit from the menu window Downloaded From camera usermanual com Agfa Manuals Se
20. com Agfa Manuals Setting the Image Size and Compression Picture resolution refers to the number of pixels in a digital picture Picture quality depends on the JPEG file compression that the camera applies when the picture is taken Higher resolution and less compression makes better quality and occupies more memory space Smaller size and normal quality pictures are easier to email while larger size and fine quality pictures are better for printing Image Size setting 1 Press the mode button to set the camera mode to 2 Press the M button to access the main menu Press the A gt or CD button until the IMAGE SIZE option is highlighted SUPER FINE a 20 T hy 3 Press the button to access the IMAGE SIZE submenu 4 Select the image size you prefer using the J aera C or amp button Press the button to Yan diren confirm your choice and exit from the menu Ve N window or press the button to give up confirmation and return to the previous menu NOTE 2816 x 2112 pixels is the default and optimal image size setting It is recomended to use this setting for printing Downloaded From camera usermanual com Agfa Manuals 35 Compression setting 1 Press the mode button to set the camera mode to 2816 X 2112 2 Press the M button to access the main SUPER FINE gt AUTO menu a AUTO 3 Press the C 2 or button to select the Aalia COMPRESSION option 4 Press the button to access th
21. d Remove protection before deleting All deleted pictures and video clips cannot be recovered Downloaded From camera usermanual com Agfa Manuals 53 6 Print Setting About PictBridge PictBridge is a new industry standard that allows you to print images directly from a PictBridge enable digital still camera to a PictBridge compatible printer without using a photo editing software or a computer Printing Procedures 1 Preparing the camera and the printer Be sure battery level is full before printing Printer Refer to the user guide that comes with your printer and make preparations paper ink cassette cartridge etc as required Turn on the camera and the printer 2 Selecting PictBridge mode Set the camera to Playback mode and select the PictBridge mode Refer to page 57 for details 3 Connecting the camera to the printer Refer to Camera Printer Connection on page 58 for details 4 Select print settings Use the camera s function and navigation buttons to select the print settings Refer to page 59 for details 5 Printing Press the GA button to start printing Downloaded From camera usermanual com Agfa Manuals Cancelling Printing A __ yu uee_ Press the j button to cancel the print job The printer will stop printing and eject the paper ERASE PROTECT SLIDE SHOW CoPY To CARD Printing Errors oe ee One of the following messages may appear on G ido the LCD screen indicat
22. d slot Should water or any foreign objects ever get into the card slot immediately turn off the camera remove the battery and contact your dealer or the nearest service provider Downloaded From camera usermanual com Agfa Manuals Formatting Memory Formatting a memory card erases all data stored on it including protected data 1 Press the mode button to set the camera mode to gy DATE TIME Follow the guidelines in Setup AUTO OFF Menu on page 16 to access the BEEP SETUP menu Press the C 2 or button to select the FORMAT CARD option Press the button Select OK or CANCEL using the C or amp button Press the button to confirm your choice and exit from the menu window NOTE SD cards formatted in another camera computer or other devices may not work properly It is recommended to format SD cards with your digital camera Note that data deleted by formatting operation cannot be recovered Make sure you do not have any useful data currently stored on a memory card before you format it When SD card is inserted only SD card can be formatted The option for format internal memory will be disabled Downloaded From camera usermanual com Agfa Manuals 67 Copying Pictures and Video Clips to Memory Card This setting allows you to copy pictures video clips stored in the internal memory to a memory card d 2 3 4 5 D N Insert an SD card into the
23. d video clips and adjusting settings for shooting and playback are performed while the camera is powered on Downloaded From camera usermanual com Agfa Manuals Ti 2 Camera Setting Checking Camera Status Turn on the camera and view the camera LCD screen to check which camera settings are active Those particular features whose icons are not displayed are not activated Still Image Mode Flash Mode Flash Off IB sp Card 5A Auto Flash Flash Always Capture Mode Red eye Reduction 4s Still Image Scene Shooting Mode Auto Portrait A Landscape Night Sunset Night amp Portrait Motion Close up Back Light bar Digital Zoom Status Optical and digital zoom Slow Sync 2 SEC Self timer W io 10 SEC Self timer Number of pictures that can be taken Image Size 2816 x 2112 2304 x 1728 2048 x 1536 1600 x 1200 640 x 480 Histogram Battery Power Level Ell om Ca Oo X Full Adequate Low Empty Exhausted DownlORRE HESA fhera usermanual com Agfa Manuals Exposure Compensation Value 2 0 1 5 1 0 0 5 0 ISO Sensitivity hie Auto io 100 a 200 l 400 White Balance TE Auto X Daylight d Cloudy Light metering Average n Center Spot Default setting D Tungsten Fluorescent Sharpness Strong Normal HA soft Compression Super Fine Fine Normal Downloaded From camera u
24. e Self timer LED will blink before the picture is taken Who 10 second self timer indicates a countdown of 10 seconds The Self timer LED will blink before the picture is taken Downloaded From camera usermanual com Agfa Manuals 43 Zoom Feature Your camera is designed with optical and digital zoom features that allows you to zoom in the central area of an image and photograph only the enlarged portion of the picture Optical zoom alters the focal distance of the zoom lens and its factor range is 1X to 3X Digital zoom is activated after the camera reaches the maximum optical zoom 3X It enlarges the part of the image up to four times at the center of the image screen Zoom In or Out the Image Digital Zoom Status Opticla zoom Digital zoom Turn on the camera Press the mode button to set the camera to Still Image or Video mode Press the Zoom In or Zoom Out button to zoom in or zoom out the subject image The zoom status is shown on the LCD screen Now you can takes pictures and review them under the zoom setting The zoom setting will remain after taking pictures If you want to take a normal size picture please use the Zoom Out button Ne a Ww For digital zoom feature we recommend the user to use the LCD screen to monitor the zoom feature NOTE ae Zoom feature is available in mode e Using the digital zoom cause a decrease in image quality Downloaded From camera usermanual com Agfa Manuals
25. e Ss COMPRESSION submenu S NORMAL 5 Select the compression you prefer using the 2p or C button Press the button to confirm your choice and exit from the menu window or press the Q button to give up confirmation and return to the previous menu Downloaded From camera usermanual com Agfa Manuals The chart below indicates the approximate numbers of pictures you can expect the camera to hold at different resolution and quality setting based on the 16 MB internal memory card You can expand the memory using a commercially available memory card Please refer to Capacity of SD Card on page 83 for further details Compression IJ super Fine Normal Resolution 2816 x 2112 2304 x 1728 2048 x 1536 1600 x 1200 640 x 480 NOTE Scene complexity affects a picture s file size For example a picture of trees in autumn has a larger file size than a picture of blue sky at the same resolution and quality setting Therefore the number of picture or the length of video clips you can store on a memory card may vary The number of pictures on the LCD screen is for reference only Downloaded From camera usermanual com Agfa Manuals 37 Setting Exposure Compensation for Pictures You can adjust the exposure compensation value EV within the range of 2EV to 2EV in order to compensate for current lighting conditions This setting can be used to obtain better result when shooting with
26. er try to force a memory card into the slot when you feel resistance SD memory cards have a write protection switch that you can use to protect files from accidental deletion However you must remove the write protection whenever you want to record new files onto it format it or delete its files Files contained in the SD card recorded by other cameras may conflict with your digital camera and valuable data in your existing SD card may be distorted or lost when the card is inserted in your digital camera We strongly recommend the user to use a NEW or formatted SD card for your digital camera The manufacturer is not liable for losing or corrupting any valuable data or files in your SD card due to improper operation As tests prove your digital camera will work with most popular brands of memory cards Downloaded From camera usermanual com Agfa Manuals n Inserting the SD Card 1 Open the SD card door by pushing it outwards as illustrated 2 Insert the SD card ensuring the card is inserted correctly as illustrated 3 Close the SD card door by pressing it downwards and then slide it back to lock Removing the SD Card 1 Turn off your camera and open the SD card door 2 Gently push the SD card inwards and then release it The SD card will eject out of the SD card slot IMPORTANT Never insert any other objects into the camera s card slot Doing so will create the risk of damage to the camera and car
27. et the camera mode to gy 2 Press the M button to access the function bar 3 Press the C or button to select the LIGHT METERING option 4 Press 9 key to enter submenu 5 Select the metering method using the C or CG button CENTER SPOT 6 The currently selected option will be accessed and takes effect immediately Press the button to confirm and exit from the function bar or press the button to return to the previous menu When shooting under these conditions Evaluates the lighting conditions throughout the picture to give an optimum picture exposure Ideal for general picture taking Select this setting Average Icon shown on the LCD screen Evaluates the lighting conditions of the subject centered on the LCD screen Ideal for backlit subjects Center Similar to Center except the metering is concentrated on a smaller area of the subject centered on the LCD Ideal when an exact exposure of a specific area in the picture is needed Spot Downloaded From camera usermanual com Agta Manuals Setting Self timer Your camera is designed with a self timer function which allows you to take pictures with the 2 second or 10 Cy second built in timer 1 Press the mode button to set the camera mode to 8 CES 2 Press the right self timer button to select OFF Disable the self timer function DA 2 second self timer indicates a countdown of two seconds Th
28. ff before the save operation is completed Or Removing the memory card before the save operation is completed If the battery is recharge your battery Or exhausted Do not remove the memory card before the save operation is completed The camera cannot take pictures The flash is recharging r The SD card is not formatted correctly Or The camera is set to the mode Or The SD card Memory is full Wait until charged the flash is fully Or The SD card may be damaged Please use a new card r Delete images you no longer need or use another memory card Color of the playback pictures is different from the picture on the LCD screen during recording Sunlight or light from another source is shinning directly into the lens during recording Position the camera so that sunlight does not shine directly onto the lens Pictures not displayed are A memory card with non DCF pictures recorded with another camera is loaded in the camera The camera cannot display non DCF pictures in a memory card used by another digital camera couldn t delete pictures All the pictures in the current memory are protected Unprotected the pictures and video clips you want to erase Please also refer to the help files amp User Guides that accompany the enclosed applications For further information and support please visit our website www plawa com Dow
29. ftware NVIDIA Windows 95 98 ME Display Drivers SoundM WinZip OK Cancel pal Downloaded From camera usermanual com Agfa Manuals 73 9 Transferring Pictures and Video Clips to a Computer Before you Transfer Pictures IMPORTANT For Windows S8SE Only Before you transfer your pictures make sure you have installed the AFGAPHOTO Digital Camera Driver from the CD Please refer to Installing the Software onto a Computer on page 69 e Connecting the Camera to Your Computer via USB Cable Connecting with the USB cable Plug mini USB cable into the USB Series A plug connects to your port of your camera computer 1 Turn the camera off 2 Plug the lt gt labelled end of the USB cable into the lt marked socket on your computer 3 Plug the other end of the USB cable into the port on your camera 4 Turn on the camera and an interface Found New Hardware will show on the computer desktop 5 A removable disk drive will be installed onto your computer automatically Downloaded From camera usermanual com Agfa Manuals Transferring Pictures and Video Clips via USB Cable For Windows Users NOTE Connect the camera to a computer via the USB cable 2 Double click on My Computer on your PC desktop and you will see a Removable Disk drive 3 Double click on Removable Disk gt double click DCIM gt double click any directory folder under DCIM
30. he C or CD button until the PROTECT option is highlighted 3 Press the 6 button to access the PROTECT PRINT SETTING tay submenu 4 Select ON or OFF using the gt or gt button Bod pel 5 Press the Cy button to confirm your choice and exit from the menu window or press the button to return to the previous menu Downloaded From camera usermanual com Agfa Manuals _ bOCKTHIS UNLOCK THIS LOCK ALL UNLOCK ALL Running a Slide Show The slide show function enables you to view all picture and video clip files stored in the current memory repeatedly one by one on the LCD screen 1 Press the mode button to set the camera mode to 9 2 Press the M button to access the main R menu COPY To CARD PRINT SETTING 3 Press the or button until SLIDE SHOW option is highlighted 4 Press the button to access the SLIDE SHOW submenu 5 Press C or A button to select ON press shutter button to exit The slide show will automatically run from the currently displayed picture after you press the button Press the button to stop the slide show Downloaded From camera usermanual com Agfa Manuals Slide Show Interval 5 Press gt or CA button to select SETUP Press to enter submenu 5 7 Press 4D or G button to select INTERVAL 8 Press or button to select one setting a desired 1 10 SECONDS Every picture will continually exist on the LED at an inte
31. he shutter button halfway to reset the focus When the light is relatively low the focus lamp helps the camera easily focus on the subject The LCD screen will show you the aperture value and shutter speed at when you take the picture 4 Hold the camera steady and slowly press the shutter button down to take your image Downloaded From camera usermanual com Agfa Manuals 29 e Taking Pictures in Different Scene Shooting Modes Select a mode that is suitable to your shooting conditions 1 Press the mode button to set the camera to o GEMA NO Eyse Still Image mode HH normal L AVERAGE A Qe SETUP 2 Press the M button to access the main menu 3 Press the C 2 or lt gt button to select the SCENE MODE option 4 Press the 6 botton to enter the submenu d AUTO gt 5 Press the C or Q button to select one F PORTAT setting desired LANDSCAPE NIGHT SUNSET button to confirm your choice 447 0 6 Press the Downloaded From camera usermanual com Agfa Manuals When shooting under these Select this mode Icon shown conditions on the LCD screen For general picture taking Automatic exposure and point and shoot operation and manual adjustment on flash mode image size ISO sensitivity etc Define the subject in a portrait shot by using Portrait the largest aperture value to produce a blurred background Produce largest depth of field by locking the Landscape focus at infini
32. here are no video clips or other file besides images in the memory before printing 1 Insert an SD card into the camera 2 Turn on the camera 3 Press the mode button to set the camera mode to 9 4 Press the M button to access the main menu 5 Press the lt gt button until DPOF bar is highlighted 6 Press the button to access the DPOF submenu 7 Select THIS IMAGE or ALL IMAGES using the C or GD button THIS IMAGE The selected picture in the memory card will be printed up to 99 copies ALL IMAGES All pictures in the memory card will be printed up to 99 copies for each picture Downloaded From camera usermanual com Agfa Manuals To print a single picture press the left or right button to select the picture you want to print before the above operation Press the up or down button to specify the number of copies 8 Press the right button 9 Specifying the number of printing Belzer MAIES copy using the or D button PRINT 00 COPIES 9 10 Press the 0K button to confirm your choice and exit from the menu window Evay 11 Remove the memory card from the camera and insert it into the printer s card slot as illustrated Location of the card slot may vary from printer to printer model NOTE Make sure you turn off the camera before inserting or removing a memory card 12 Press the Print button on the printer to start printing Downloaded From camera use
33. ing Pictures Before you take pictures please read this note first NOTE Never remove the batteries while a picture is being saved Doing so will prevent the current picture from being saved and may corrupt other pictures already stored on the camera s internal memory or a memory card e Taking Pictures in Normal Mode Use this mode to capture subjects and make sure they are at least the distance from the taking lens as indicated below Wide Angle 0 3 m 1 ft Infinity Telephoto 0 4 m 1 3 ft Infinity NOTE Most settings are saved by the camera when the power is turned off so that the same setting is automatically available when the power is turned on again Make sure you verify your settings when turning the camera on again Downloaded From camera usermanual com Agfa Manuals Set the camera to the Still Image mode Frame your subject using the LCD screen Press the shutter button halfway to set the exposure and focus The camera automatically detects the subject The camera s focus mark is highlighted in green when the camera s focus is locked on the subject ON NOTE When the camera s focus mark is highlighted in green the user can take photos normally When the camera s focus mark is highlighted in red the subject is not in proper focus as the subject is either out of range or the light is too low Release the shutter button recompose the scene and press t
34. ing that an error occurs before or during printing Select CANCEL or CONTINUE Or please refer to the printer s user guide for the solutions Printing may resume once the problem is solved Pao EL NOTE Printing operation may still fail with some errors even if you press the button after selecting CONTINUE In that case select CANCEL and press the Q button Downloaded From camera usermanual com Agfa Manuals 55 List of Error Messages PAPER IS EMPTY PAPER IS NOT LOADED PAPER IS NOT EJECTED U0 o per cassette runs out of paper per is not loaded or incorrectly loaded o 9 per is not ejected correctly MEDIA ERROR Paper is not detected paper is skewed or roll paper cannot be cut or torn off PAPER IS JAMMED The paper is jammed during printing PAPER IS NEARLY EMPTY Paper cassette almost runs out of paper PAPER TYPE IS NOT SUPPORTED Paper type or size is not supported by the printer or paper found in the printer does not match request INK EMPTY INK LOW WASTE INK RESERVOIR FULL HARDWARE FATAL ERROR PRINTER IS BUSY Ink cassette is out of ink Ink cassette is almost empty Waste ink reservoir is full A serious error occurs with the printer s hardware The printer is busy with other print jobs from another source PRINTER IS OCCUPIED The printer is performing maintenance or occupied by other external device COVER IS OPENED The printer s cover is open or
35. is an easy to use and powerful image editing software loaded with everything you need to fix print and get creative with your digital pictures This program gives you quick access and all at once enhancement to the pictures on your computer for example removing red eye and cloning objects to a different picture In some quick actions you could also add special effects or place them in cards calendars frames and fantasy templates ArcSoft PhotoStudio also includes a wide variety of printing options ArcSoft PhotoPrinter Picture Editing Software A quick easy way to get great looking photo prints at home In just a couple of clicks you can turn your favorite digital snapshots into gorgeous color photos ready for framing scrapbooking or sending to family and friends Adobe Acrobat Reader PDF File Reading Software Adobe Acrobat Reader lets you view and print Adobe Portable Document format PDF files on all major computer platforms as well as fill in and submit Adobe PDF forms online Downloaded From camera usermanual com Agfa Manuals 71 Computer System Requirements For acceptable picture transfer and editing performance we recommend the following minimum requirements For Windows Users Pentium Ill 450 MHz or equivalent processor Compatible with Microsoft Windows 98SE Me 2000 or XP 128 MB RAM 256 MB recommended USB Port DirectX 9 0 or higher 500MB free disk space Color monitor
36. ls Using Your Battery Limit the following activities that reduce battery life Reviewing your pictures on the LCD screen Excessive use of the flash WARNINGS Battery should be replaced by an adult Insert the battery with the correct polarity Remove exhausted battery from the camera immediately Do not short the supply terminals Do not dispose the battery in fire Remove battery from the camera when not in use Batteries life varies depends on the camera usage These instructions should be retained for future reference Checking the Battery Level Check the battery power level that appears on the LCD screen before shooting TTL Battery power is full an Battery has adequate power i Battery power is low i Battery is empty Xl Batter power is exhausted NOTE o 1 When battery power is empty the __ icon appears on the LCD screen Taking pictures is possible while flash can not be supported 2 When battery power is exhausted the OX icon appears on the LCD screen and then the camera will turn off automatically in a few seconds Please replace the battery immediately 3 We recommend user to use Ni MH rechargeable battery Downloaded From camera usermanual com Agfa Manuals e Turning the Camera On and Off 1 Press the 0 button until the Power On LED screen turns on 2 Press the 0 button again to turn off the camera IMPORTANT All operations including taking pictures an
37. nd frequently asked questions FAQ s Downloaded From camera usermanual com Agfa Manuals 79 12 Appendix Technical Specifications Sensor 1 2 0 inch 6 0 Megapixel CCD Type 5 groups 5 elements Focal Length 6 48 mm Wide 18 87 mm Tele LCD Screen 2 4 TFT color panel Built in Flash Modes Flash Off Auto Flash Red eye Reduction Forced On Slow Sync Flash Range Normal Wide 1m 3 3 ft to 3 m 9 9 ft elephoto 1m 3 3 ft to 2 5 m 8 ft Close Up Wide 0 1m 4 inches to 1m 3 3 ft Telephoto 0 2m 7 9 inches to 1 m 3 3 ft Exposure Control 2 EV in 1 2 increments ISO Speed o 100 200 400 Shutter Speed chanical shutter 1 1000 sec 2 sec White Balance o Daylight Cloudy Tungsten Fluorescent Storage Internal Memory 16 MB Supports SD card up to 1 0 GB Downloaded From camera usermanual com Agfa Manuals File Format Still Image EXIF 2 2 compatible format JPEG compression Video clip AVI format 320 x 240 30fps 640 x 480 30fps Power Supply 2 X AA batteries included Self timer 2 or 10 seconds Tripod Socket Connectivity With computer via USB cable Dimension Operating System Size 92 mm 3 6 inches W x 60 mm 2 4 inches H x 23 mm 0 9 inches D Weight Approximately 125g excluding batteries or card For Windows Users Microsoft Windows 98SE Me 2000 or X
38. ngs differ according to the printer model ON Add the date stamp to the printed image OFF Print without the date stamp Selecting Paper Size 1 Press the lt gt button to select SIZE 2 Press the left or right button to select the paper size DEFAULT The following paper sizes are supported DEFAULT Default L 2L postcard cardsize 100mm x DEFAULT 150mm A4 A6 4 x 6 8 x 10 letter 4 r ey a only DEFAULT Print settings differ according to the printer model Printing 1 Press the 9 button 2 Press the k button to continue printing 3 Press the button to cancel printing Press the M button to return to the Pictbridge print setting window File name and date stamp may not be printed or printed incompletely on certain sizes of paper Downloaded From camera usermanual com Agfa Manuals 61 About DPOF DPOF stands for Digital Print Order Format which is a format for recording on a memory card or other medium which captured images and how many copies should be printed You can print on a DPOF compatible printer or at a professional print service from the memory card in accordance with the file name and number of copies settings recorded on the card With this camera you should always select images by viewing them on the LCD screen Do not specify images by file name without viewing the file contents NOTE Print settings are configured for images only Make sure t
39. nloaded From camera usermanual com Agfa Manuals 11 Getting Help Customer Care More information to the complete product range can be found under www plawa com Service amp Repair Hotline Europe 00800 75292100 Online Service support apdc plawa com English German Service amp Support Hotline Germany 0900 1000 042 1 49 Euro min Deutsche Telekom Manufactured by plawa feinwerktechnik GmbH amp Co KG plawa feinwerktechnik GmbH amp Co KG Bleichereistr 18 73066 Uhingen Germany ArcSoft Software Help For United States ArcSoft HO Support Center Fremont CA 94538 Tel 1 510 979 5599 Fax 1 510 440 7978 E mail support arcsoftsupport com Web http www arcsoft com en support For Europe ArcSoft Europe Support Center Ireland Tel 353 0 61 702087 Fax 353 0 61 702001 E mail eurosupport arcsoft com For Japan ArcSoft Japan Support Center Tokyo Tel 81 3 5795 1392 Fax 81 3 5795 1397 E mail support arcsoftjp Web http www arcsoft jp For Latin America E mail latinsupport arcsoftsupport com For China ArcSoft China Support Center Hangzhou Tel 86 571 88210575 E mail support arcsoft com cn Web http www arcsoft com cn new support For Taiwan ArcSoft Taiwan Support Center Taiwan Tel 886 0 2 2506 9355 Fax 886 0 2 2506 8922 E mail support arcsoft com tw Web www arcsoft com tw Visit http wwwarcsoft com for technical support a
40. not securely closed NO MARKING AGENT Some print information is missing during printing e g missing print head Downloaded From camera usermanual com Agfa Manuals Selecting PictBridge Mode 1 Press the mode button to set the camera mode to 2 Press the M button to access the main menu m of o a 3 Press the C 2 or GA button to select the PICTBRIDGE option 4 Press the button 5 Connect the camera with the printer via a USB cable J NOTE To print a single image select the image before enabling PictBridge mode Downloaded From camera usermanual com Agfa Manuals 57 Carmra Printer Connection Connecting with the the USB cable Plug USB cable into the port of your camera USB Series A plug connects to your printer 1 Plug Series A of the USB cable into the gt marked socket on your printer Location of USB socket will vary from printer to printer 2 Plug USB of the USB cable into the port on your camera 7 THIS IMAGE 7 PLEASE DEVICE rua CONNECT TO DEVICE IS CONNECTED ALL INDEX ey NOTE e f DEVICE IS CONNECTED displays on the LCD screen indicating a proper connection to the printer e Do not connect the USB cable to the camera until PictBridge is enable and when prompted by the PLEASE CONNECT TO DEVICE screen Or if you already have connected the cable to the camera do not plug into printer until prompt to do so Not f
41. ollowing this sequence will result in connection failure Downloaded From camera usermanual com Agfa Manuals Selecting Print Settings 1 Press C or G button to select the print mode eels IMAGE ALL IMAGES ALL INDEX 2 The following options are available THIS IMAGE Print the selected image in the camera s internal memory or a memory card according to specified settings Use the left or right button to designate the image you want to print before selecting the print settings ALL IMAGES Print all images in the camera s internal memory or a memory card according to the specified settings ALL INDEX All images in the camera s internal memory or a memory card are given an index and printed according to the specified settings NOTE To print a single image select the image before enabling PictBridge Print settings are configured for images only Make sure there are no video clips or other file besides images in the memory before printing e Not all printers will support all these print options Please refer to the printer user guide for options available 3 Press the Q or button to select the print settings Number of Copies DEFAULT Print Layout DEFAULT File Name On Off DEFAULT Date Stamp On Off DEFAULT Paper Size Select a setting item using the ADO x button and select setting contents using the qer 6 button NOTE The camera s print settings are not supported by some
42. om the main menu or press the Q button to return to the previous menu When shooting under these conditions Select this setting Icon shown on the LCD screen Automatic adjustment Auto Outdoor sunny day Daylight Cloudy Cloudy Indoors illuminated by light bulbs Tungsten Indoors illuminated by cool white fluorescent lighting Downloaded From camera usermanual com Agfa Manuals Fluorescent Setting the Sharpness Use the sharpness setting to highlight or blend the edges of subjects in pictures 1 Press the mode button to set the camera mode to 2 Press the M button to access the main menu 3 Press the C 2 or gt button to select the SHARPNESS option 4 Press the button to access the SHARPNESS submenu 5 Select the sharpness you prefer using the or button 6 The currently selected option will be accessed and takes effect immediately Press the button to exit from the function bar or press the button to return to the previous menu STRONG Increases contrast on the edge of the picture Image color noise may occur NORMAL The edges of the image are sharp this is suitable for printing SOFT Softens the edge of the picture Downloaded From camera usermanual com Agfa Manuals 41 Setting Light Metering Use the light metering setting to ensure that the proper amount of light enters into the camera lens 1 Press the mode button to s
43. on to set the camera mode to 2 Press the C 2 button to cycle through the flash options and select the one you need NOTE When you press the C button the Flash LED blinks which indicates the flash is charging The icon according to the flash setting you selected will appear on the LCD screen Downloaded From camera usermanual com Agfa Manuals 33 When shooting under these conditions Select this mode Icon shown on the LCD screen The flash does not fire Use this setting Flash Off for outdoor pictures or where flash is prohibited or may be distracting or when shooting towards a reflective surface such as a window or a mirror If there is not enough light when using this setting your pictures will be too dark The flash fires automatically as needed Auto Flash 5A Use this setting to take most pictures Use this setting to avoid red eye in your Red eye subject s eyes The camera fires a brief Reduction preflash before the regular flash The flash fires for every picture Use Flash Always this setting in high contrast situations to provide fill light or use it indoors in low light There is a slight delay in the flash than it Slow Sync 5S does in Auto Hold the camera steady until you have taken your pictures NOTE Never touch or block the flash with your fingers Doing so can damage these components and interfere with the correct flash operation Downloaded From camera usermanual
44. ove It can be downloaded from http www microsoft com directx Downloaded From camera usermanual com Agfa Manuals 1 Before you begin close all other software applications open on your computer 2 Insert the CD supplied into the computer CD ROM Drive Open amp Close f 3 The CD User Interface Screen will automatically launch 4 With the mouse click on each software interface button in turn and follow the on screen instructions NOTE If the setup screen does not appear after loading the CD then you can manually start it by double clicking the My Computer icon on your desktop then double clicking the icon for the CD ROM drive When the CD ROM window opens double click the INSTALL E EXE icon For Macintosh Users 1 Before you begin close all other software applications open on your computer Insert the CD supplied into the computer CD ROM Drive Double click the CD ROM icon AGFAPHOTO Install the software included AGFAPHOTO AWN Downloaded From camera usermanual com Agfa Manuals Software Included with Your Camera AFGAPHOTO Digital Camera Driver Plug amp Play removable disk For Windows 98SE Easy to use just plug the camera to a computer and use it as a removable disk Use the ArcSoft PhotoStudio to edit and print the pictures Only install for Windows 98SE ArcSoft PhotoStudio Picture Editing Software ArcSoft PhotoStudio
45. oximate length of video clips you can expect the camera to hold at each setting based on the 16 MB internal memory card You can expand the memory with a commercially available memory card Please refer to Capacity of SD Card on page 83 for further details Resolution 640 x 480 Approx 9 seconds 30 fps 320 x 240 Approx 28 seconds 30 fps Downloaded From camera usermanual com Agfa Manuals Setting White Balance for Video Clips Selecting the right type of white balance can help to make the color of a subject in the video clip appear more natural under the type of lighting that is available 1 Press the mode button to set the camera mode to J 2 Press the M button to access the main menu 3 Press the C 2 or gt button to select White Balance submenu 4 Use button to enter submenu then select the value by pressing CAD or OD button 5 The currently selected option will be accessed E DAYLIGHT and takes effect immediately Press the cLouby 7 TUNGSTEN button to exit from the function bar or press the ae eae button to return to the previous menu When shooting under these Select this setting Icon shown conditions on the LCD screen Automatic adjustment Auto Outdoor sunny day Daylight Cloudy Cloudy Indoors illuminated by light Tungsten bulbs Indoors illuminated by cool Fluorescent white fluorescent lighting gt 5 Managing Pictures and Video Cli
46. ps Reviewing Pictures Reviewing Pictures in Full Screen 1 Press the mode button to set the camera mode to 2 Use the left and right buttons to view the pictures taken The icon is shown on the LCD screen when a picture is selected Reviewing Picture and Video Clip Files in Thumbnail You can view up to nine pictures and video clip files at a time on the LCD screen by using the thumbnail function 1 Press the mode button to set the camera mode to 2 Press the button once and nine thumbnail files will be shown on the LCD screen with the latest displayed file highlighted 3 Use the up down left and right buttons to select a thumbnail file and view it in full screen by pressing the or button Downloaded From camera usermanual com Agfa Manuals Playing the Video Clip 1 Press the mode button to set the camera mode to Movie 2 Use the Q and 6 button to select the video clip you want to play 3 Press the WAZ button to start playing the selected video clip and press again to pause 4 Press shutter button to exit The i icon is shown on the LCD screen when a video clip is selected Protecting or Unprotecting the Selected Picture or Video Clip Use the left or right button to select the picture or video clip you want to protect or unprotect 1 Press the mode button to set the camera mode to 2 Press the M button to access the main menu Press t
47. rmanual com Agfa Manuals 63 7 Using Memory Card Using memory card Your camera comes with built in flash memory for storing pictures and video clips You can expand the memory using a commercially available SD card up to 1 GB The camera senses whether a memory card is inserted and automatically saves pictures and video clips accordingly Note that you cannot save pictures or video clips to the built in flash memory while a memory card is installed in the camera See pages 82 to 84 for storage Capacities Memory card precautions 1 An electrostatic charge electrical noise and other phenomena can cause data corruption or even loss Always make sure that you always back up important data on other media MO disc computer hard drive etc 2 If a memory card starts to behave abnormally you can restore normal operation by formatting it However we recommend that you always take along with more than one memory card whenever using the camera far away from your home or office 3 We recommend that you format a memory card when using it for the first time or whenever the card you are using seems to be the cause of abnormal pictures Remember to format a memory card if it was used in another digital camera or other devices Downloaded From camera usermanual com Agfa Manuals IMPORTANT Make sure you turn off the camera before inserting or removing a memory card Be sure to orient the card correctly when inserting it Nev
48. rval of 1 10 seconds Downloaded From camera usermanual com Agfa Manuals 51 Slide Show Direction 1 Press the mode button to set the camera mode to 9 COPY To CARD PRINT SETTING 2 Press the M button to access the main menu 3 Press the lt gt or gt button until SLIDE SHOW option is highlighted 4 Press the button to access the SLIDE SHOW submenu 5 Press C or button to select SETUP 6 Press Pto enter submenu 7 Press lt 2 or amp button to select ee r TaRa N DIRECTION BIVE A 8 Press C or button to select one setting desired NOTE The slide show will keep running as long as all the pictures or video clips stored in the camera are displayed Downloaded From camera usermanual com Agfa Manuals e Deleting Picture s and Video Clip s 1 Press the mode button to set the camera mode to 2 Press the M button COPY TO CARD 3 Press the C or button to select PRINT SETTING Ooae gt ERASE 4 Press the button 5 Press the C or GA button to select one p desired setting ERASE ALL ERASE THIS Erase the selected picture or video clip Please select the picture or video you want to delete before pressing the Erase button ERASE ALL Erase all pictures and video clips stored in the current memory 6 Press the button 7 Select OK or CANCEL using the C2 or GD button NOTE Protected files can not be delete
49. s activated Or The battery is exhausted Turn the camera on Or Recharge your battery Image is not recorded when the Shutter button is pressed Camera is turned off Or Flash unit is charging Or Memory is full Turn the camera on Or Wait until flash unit charging finishes Or Delete images you no longer need or use another memory card Camera powers off during self timer countdown The battery is exhausted Replace your batteries LCD screen image is out of focus Normal focus is being used for macro images Select a correct scene shooting mode for taking pictures AVI file cannot be played DirectX version is lower than 9 0 Install DirectX 9 0 or above Visit http www microsoft com directx for more details The camera is detected by the Windows and works properly But a drive letter of the Removable Disk is not created The removable disk crashes with the network drives Disconnect the crashed network drive and reserve this drive letter for the camera There is no response from the camera while pressing any buttons The LCD screen is frozen or the camera is hanged Remove and re install the battery or batteries to reset the camera Your valuable data stored in the camera will not be lost Downloaded From camera usermanual com Agfa Manuals 77 Symptom Problem Solution Recorded pictures are not saved in memory Camera powers o
50. s plus video recording functionality Built in flash with five modes off auto flash aways red eye reduction and slow sync e Adjust your picture s resolution for printing or emailing e Light metering white balance exposure compensation to suit lighting conditions Experience PictBridge capability to plug and print your images Downloaded From camera usermanual com Agfa Manuals Camera Package Contents DC 633xs rha A0FAHTO Quick Start Guide Warranty Card 2 AA Battery Pouch USB Cable The CD ROM includes DC 633xs Digital Camera Driver PC only ArcSoft PhotoStudio 5 5 PC ArcSoft PhotoStudio 4 3 Mac ArcSoft PhotoPrinter 5 PC ArcSoft PhotoPrinter 4 Mac Adobe Acrobat Reader PC amp Mac User Manual in PDF format Wrist Starp Downloaded From camera usermanual com Agfa Manuals Installing and Removing the Battery 1 Open the camera battery door by pushing it outwards as illustrated 2 Insert the battery as shown 3 Close the battery door by pressing and sliding it back to lock 4 To remove the battery open the camera battery door by pushing it outwards as illustrated 5 Remove the battery as shown 6 Close the battery door by pressing and sliding it back to lock 4 BES ae Nes For more guidelines on battery usage please see Using Your Battery on page 10 Downloaded From camera usermanual com Agfa Manua
51. sermanual com Agfa Manuals 13 Video Mode Recording Indicator Elapsed Time Video Mode Video Resolution White Balance 240 480 2 vB Auto Eo Daylight S Cloudy Ww Tungsten Fluorescent Playback Mode Locked File File Type File Number D Picture HO Video Clip INEEN Date and Time 13 05 12 Downloaded From camera usermanual com Agfa Manuals Camera Modes The camera has three working modes Capture mode Playback mode and Video mode Pressing the mode button switches among the Capture mode Playback mode and Video mode NOTE Still Image mode is the default capture mode How to Navigate Menus Menus and function bars are used to adjust capture and play settings as well as other camera settings like the Date Time Auto Power Off and so on Press the M button to enter the menu and press the right button to enter an submenu Use the up and down buttons to scroll up and down and use the left and vva buttons to scroll left and right Use the button to confirm your choice and left button to return previous in first and second level menu Press the M button to activate a function bar Use the four way navigation buttons to scroll up down left and right Downloaded From camera usermanual com Agfa Manuals 15 Setup Menu The setup menu can be accessed in all nine working modes to customize your camera settings Here we take the mode for an example 1
52. tting the Date Stamp On Off Use the date stamp setting to imprint the date on your pictures Make sure the date is correct before setting the date stamp on 1 Follow the guideline in Setup Menu on page 16 to access the SETUP menu 2 Select the DATE STAMP option using the C 2 and oe e gt button DATESTAMP gt 3 Press the button to access the DATE STAMP AN submenu REN 4 Select ON or OFF using the C or gt button Press the button to confirm your choice and exit from the menu window Downloaded From camera usermanual com Agfa Manuals 23 Changing the USB Mode Between Mass Storage Mode and Pictbridge You can choose either MSDC Mass Storage Device Class or Pictbridge Camera as a driver type in this camera MSDC is a computer interface between a computer and a digital camera which shows the digital camera as a removable disk drive attached to the computer You may view and download pictures and video clips stored in your camera s internal memory or a SD memory card onto your computer 1 Set the camera to Still Image mode gn LU nnd LANGUAGE C3 DATE STAMP 2 Access the Setup menu 3 Press the gt or C button to select USB NE ee DEFAULT SETTING MODE 4 Press the 6 button 5 Press the C or lt gt button to select the desired setting button 6 Press the NOTE The driver type always resets to MSDC when the camera is turned off Downloaded From
53. ty and keeping the smallest aperture value Used for the wide scenic views at night Night Enhance the red hue for recording sunset Sunset images Blurring the background to focus on the Night amp Portrait subject at night Freeze the subject in motion by using a Motion faster shutter speed in combination with ISO 100 sensitivity for a particular exposure BR be BEI For taking close up macro pictures Close up Shooting the image of backlit object by Backlight changing the metering lt Downloaded From camera usermanual com Agfa Manuals 31 Taking Pictures in Close Up Macro Mode Use this mode to capture subjects this close to the lens Wide Angle 0 1 m 4 inches 1 m 3 3 ft Telephoto 0 2 m 7 9 inches 1 m 3 3 ft 1 Set the camera to Still Image mode 2 Press the lt gt button and the con appears on the LCD screen 3 Capture procedures are the same as for taking a picture in the normal capture mode See page 28 Downloaded From camera usermanual com Agfa Manuals Setting Flash Mode Use the flash when you take pictures at night indoors or outdoors in heavy shadows The camera has four flash modes default setting is Auto Flash Flash Range Normal Wide 1m 3 3 ft to 3 m 9 9 ft Telephoto 1m 3 3 ft to 2 5 m 8 ft e Close Up Wide 0 1m 4 inches to 1m 3 3 ft Telephoto 0 2m 7 9 inches to 1 m 3 3 ft 1 Press the mode butt
54. y not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Downloaded From camera usermanual com Agfa Manuals NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is needed Consult the dealer or an experienced radio TV technician for help Shielded ca

Agfaphoto DC-633xs User Guide Manual pdf

Contents

Download Pdf Manuals

Related Search

Related Contents