KVM Switch User Manual
Contents
1. Remark m You must press the KVM hotkey within 2 seconds E A beep sound will be heard for successful entering KVM hotkey UM CV 751 SKVM Q113V1 P 16 www rackmountsales com 4 3 KVM OSD Combo DB 15 KVM Usage OSD Menu PORT NAME BANK 1 F1 MENU 01 BSE F2 LOGOUT 02xt SYSTEM 02 F3 PREV 03xt SYSTEM ESC QUIT 04xt SYSTEM ENTER COMPLETE 053 SYSTEM SELECT 06 SYSTEM PgUp PgDn 07 SYSTEM BANK SELECT 08 SYSTEM USER SUPERVISOR SCAN TIME 10 SEC OSD operation xt next to the system name The PC is powered on 2 next to the system name The PC is selected F1 Access F1 MAIN MENU F2 Logout the OSD menu F3 Previous menu Esc Cancel Quit Enter Complete Switch to selected port t t Switch to previous or next port PgUp PgDn Switch to previous bank or next bank Display port 01 08 09 16 17 24 25 32 1 21314 Remark Display port 17 32 for 32 port model only F1 Main Menu MAIN MENU SELECT OPTION LANGUAGE PORT NAME EDIT PORT SEARCH USER SECURITY ACCESS LIST HOTKEY TIME SETTINGS OSD MOUSE LANGUAGE OSD language change PORT NAME EDIT Define port name PORT SEARCH Quick searching by port name USER SECURITY Change password ACCESS LIST Define user access authority HOTKEY Change hotkey TIME SETTINGS Modify scan display time interval OSD MOUSE Modify OSD mouse speed UM CV 751 SKVM Q113V1 P 17 www rackmountsales com 4 4 KVM Hotkey amp Remote Console Hotkey Combo DB 15 KVM Usage2. Causes external to the product such as electric power fluctuation or failure Use of supplies or parts not meeting our specifications Normal wear and tear Any other causes which does not relate to a product defect BM Removal installation and set up service charges OOOOO00O Regulatory Notices Federal Communications Commission FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Any changes or modifications made to this equipment may void the user s authority to operate this equipment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures BM Re position or relocate the receiving antenna E Increase the separation between the equipment and receiver E Connect the equipment into an outlet on a circuit different from that to which the receiver is connected UM
3. CV 751 SKVM Q113V1 www rackmountsales com Contents lt Part 1 gt Combo DB 15 2 console KVM KVM IP8 KVM IP16 1 1 Package contents P 1 1 2 KVM port connection P 2 1 3 IP amp Local console connection P 2 1 4 IP console setting P 3 1 5 KVM Cascade P 4 1 6 Specifications PS lt Part 2 gt Combo DB 15 2 console KVM KVM 08R KVM 16R 2 1 Package contents P 6 2 2 KVM port connection P 7 2 3 Remote amp Local console connection P7 8 2 4 KVM Cascade P 9 2 5 Specifications P 10 lt Part 3 gt Combo DB 15 KVM KVM S8 KVM S16 3 1 Package contents P 11 3 2 KVM port connection P 12 3 3 KVM Cascade P 13 3 4 Specifications P 14 lt Part 4 gt Usage 4 1 KVM Button P 15 4 2 Password P 16 4 3 KVM OSD P 17 4 4 KVM Hotkey amp Remote Console Hotkey P 18 4 5 DC power 12V 24V 48V Input P 19 UM CV 751 SKVM Q113V1 www rackmountsales com Before Installation MB Itis very important to mount the equipment in a suitable cabinet or on a stable surface m Make sure the place has a good ventilation is out of direct sunlight away from sources of excessive dust dirt heat water moisture and vibration Unpacking The equipment comes with the standard parts shown in package content Check and make sure they are included and in good condition If anything is missing or damaged contact the supplier immediately Installation for standalone KVM Screw A 2 pcs Screw B 8 pcs Ly Og P M3 2 x 4 5 mm M4 x 10 mm E Install ea
4. cables connectors are properly connected m Recommend Power ON sequence is monitor KVM switch finally computer Front Panel Port LED Indications 8 ports Bank no PC port LEDs Channel button button LUL2 2 4 3 LICI III E Bank no 7 Segment BANK LED indication PC port LEDs Online Blue LED on indicating a PC is connecting to the port Active Green LED on indicating a selected channel Channel button Press to select channel from 01 to 16 Bank button Select the bank from 1 to 8 UM CV 751 SKVM Q113V1 P 15 www rackmountsales com 4 2 Password Combo DB 15 KVM Usage The password is enabled by default the default password is 00000000 eight zeros Do not use 0 on number pad E Enable password 1 2 3 4 Press the KVM hotkey Scroll Lock Scroll Lock U Logout the KVM by pressing the hotkey Scroll Lock Scroll Lock P In SUPERVISOR level enter 00000000 eight zeros in user name amp password field Do not use 0 on number pad In USER level press Space bar Enter in user name amp password field Remark Automatic logout after 10 minutes of inactivity E Set your own user name amp password 1 of ON Login the KVM in SUPERVISOR level by pressing 00000000 eight zeros in user name amp password field Call KVM OSD menu by pressing the KVM hotkey Scroll Lock Scroll Lock Space Bar Press F1 to the MAIN MENU Select USER SECURITY Set password in SUPER
5. or 16 Connector DB 15 combo connector Connectivity Combo 4 in 1 KVM cable up to 6 10 amp 15 feet BM Local Console Graphic connector 1 x DB 15 VGA Resolution Up to 1600 x 1200 Input device 2 x USB type A for keyboard amp mouse m IP Remote Console Connector RJ45 Ethernet User management 15 user login 1 x active user Network protocol DHCP BOOTP DNS Security SSL v3 RSA AES HTTP HTTPs CSR Resolution Up to 1600 x 1200 Browser IE Firefox Safari Netscape E Expansion Up to 128 servers by 8 level cascade m Compatibility Multi platform Mix PCs SUN and Mac G3 G4 Mac iMac Support Windows 7 Vista 2003 XP Linux Unix m Power Input 100 or 240V AC at 50 or 60 Hz via IEC type cord Option DC 12V 24V 48V DC input Consumption Max 24 Watt Standby 5 Watt Regulatory Approval cUL FCC CE M Environmental Operating 0 to 50 C Storage 5 to 60 C Relative humidity 90 non condensing Shock 50G peak acceleration 11ms half sine wave Vibration 58 100Hz 0 98G 11ms cycle Product Information Dimension W x D x H 443 x 171 x 43 6 mm 17 4 x 6 7 x 1 72 inch Net weight 3kg 6 51b Packing Information Dimension W x D x H 500 x 400 x 90 mm 19 7 x 15 7 x 3 5 inch Gross weight 5 kg 11 Ib UM CV 751 SKVM Q113V1 P 5 www rackmountsales com Part 4 Usage Combo DB 15 KVM Usage 4 1 KVM Button Power ON E Turn off all servers and KVM switches BM Make sure all
6. CRYSTAL IMAGE E Cc A N i E S dedicated KVM switch and rackmount screen technology User Manual Combo DB 15 2 console KVM KVM IP8 KVM IP16 Combo DB 15 2 console KVM KVM 08R KVM 16R Combo DB 15 KVM KVM S8 KVM S16 UM CV 751 SKVM Q113V1 www rackmountsales com Legal Information First English printing October 2002 Information in this document has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this document is subject to change without notice We are not liable for any injury or loss that results from the use of this equipment Safety Instructions Please read all of these instructions carefully before you use the device Save this manual for future reference m Unplug equipment before cleaning Don t use liquid or spray detergent use a moist cloth M Keep equipment away from excessive humidity and heat Preferably keep it in an air conditioned environment with temperatures not exceeding 40 Celsius 104 Fahrenheit m When installing place the equipment on a sturdy level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby m When the equipment is in an open position do not cover block or in any way obstruct the gap between it and the power supply Proper air convection is necessary to keep it from overheating E Arrange the equipment s power cord in such a way t
7. Local Console Hotkey Function Scroll Lock ScrollLock Space Bar Calling OSD menu Right button mouse Esc Calling OSD menu Scroll Lock Scroll Lock 4 Switch to previous port Scroll Lock Scroll Lock Jy Switch to next port Scroll Lock Scroll Lock PgUp PgDn Switch to previous bank or next bank Scroll Lock Scroll Lock Bank no Port no Switch to specific port Turn the buzzer ON and OFF Default the buzzer is ON Logout the KVM if password security is ON Show up the status windows Scroll Lock Scroll Lock B Scroll Lock Scroll Lock P Advance hotkeys for Supervisor login only Activate auto scan mode for connected servers Press any key to exit the auto scan mode Reset all the KVM settings to factory Scroll Lock Scroll Lock R default Except User Security settings Disable and enable password security Default security is ON To enable disable the screen saving Scroll Lock Scroll Lock L function and 10 minutes auto logout Default the screen saving is OFF Scroll Lock Scroll Lock S Scroll Lock Scroll Lock U Remarks E Example of Scroll Lock Scroll Lock Bank no Port no Bank No 1t08 PortNo 01 to 16 e g Bank 1 Port4 Scroll Lock Scroll Lock 1 0 4 e g Bank 2 Port 16 Scroll Lock Scroll Lock 2 1 6 m You must press the hotkey within 2 seconds m A beep sound will be heard for successful entering E The numeric keypad is not supported while in OSD s
8. P auto configuration None Refresh Devices IP address 192 168 1 22 Device Type i Subnet mask 255 255 255 0 C Enable WLAN Configuration WLAN Devices only Gateway 0 0 0 0 Authentication Wireless LAN Configuration Super user login Super user password Enable WEP encryption ii RR 7 SE I New super user password Wireless LAN WEP Key New password confirm Status Ready Click Refresh Device to search the connected IP KVM Select the M A C address which you want to setup then click Query Device Enter Super user login The default is super Enter Super user password The default is pass Enter the new super user password Re enter the new password Change the desired IP address Subnet mask Gateway then click Setup Device to confirm the setting to IP KVM The default address is as below The single IP KVM model such as IP 1602 http 192 168 1 22 OAN OO FW Bs 11 Open Internet Explorer I E version 6 0 or above Authenticate Username and Password 12 Enter the IP KVM address into the address bar For Single IP http 192 168 1 22 Usemame 13 Enter username default is super Password Password default is pass 14 After successful login to IP KVM the user will enter the main page of IP KVM A The setting is enough for intranet If the users access KVM GUI via internet please ask MIS for assistance and download IP KVM
9. VISOR amp USER level a In the left top row S SUPERVISOR press Enter to set your own user name amp password b Inthe row 1 to 8 USER press Enter to set your own user name amp password Press Enter to save the setting or press Esc to cancel the editing without any change Remark a Blank has underscore while SPACE doesn t have b Press any alphanumeric key to move to next input item SPACE is treated as a valid character m Change your password akRWONS gt EBD 1 2 3 Login the KVM in SUPERVISOR level by pressing your own user name amp password Call KVM OSD menu by pressing the KVM hotkey Scroll Lock Scroll Lock Space Bar Press F1 to the MAIN MENU Select USER SECURITY Change password in SUPERVISOR amp USER level a In the left top row S SUPERVISOR press Enter to change your user name amp password b Inthe row 1 to 8 USER press Enter to change your user name amp password Press Enter to save the setting or press Esc to cancel the editing without any change Remark a Blank has underscore while SPACE doesn t have b Press any alphanumeric key to move to next input item SPACE is treated as a valid character isable your password Press the KVM hotkey Scroll Lock Scroll Lock U Logout the KVM by pressing the KVM hotkey Scroll Lock Scroll Lock P You don t need user name amp password to access the KVM OSD menu E Forget your password Please contact your supplier for further support
10. ch bracket using screws provided shown in Figure 1 E Fix the KVM into the rack Figure 1 UM CV 751 SKVM Q113V1 www rackmountsales com lt Part 1 gt Combo DB 15 KVM lt 1 1 gt Package Contents Combo DB 15 IP KVM KVM IP8 KVM IP16 IP 802 or IP 1602 KVM unit x 1 e Mounting set w bracket amp screws x 1 e Power adapter w power cord for KVM x 1 KVM IP8 Local Console mi Power Cascade I UM CV 751 SKVM Q113V1 P 1 www rackmountsales com lt 1 2 gt KVM port connection Combo DB 15 IP KVM KVM COMBO 6 10 i 15 USB Servers m 6 10 15 ft Combo KVM cable BM Support PS 2 or USB server 6 10 15 Combo KVM cable PS 2 Servers support PS 2 or USB server ED gi 20 I e hi Local USB console Network device hub or router CAT 5 6 cable max 100m q Q U UM CV 751 SKVM Q113V1 P 2 www rackmountsales com lt 1 4 gt IP console setting Combo DB 15 IP KVM After the cable connection please take the following steps to configure the IP KVM 1 Download IPKVMsetup exe from the link www austin hughes com support utilities cyberview IPKVMsetup exe 2 Double click IPKVMsetup exe to configure the IP KVM by device setup as below x Device Setup Device Network Configuration Device MAC address C8 EE 08 00 00 7E I
11. creen the arrow keys PgUp PgDn and Enter keys are supports Remote Console Hotkey Function Scroll Lock Scroll Lock C Toggle switch between remote amp local port Scroll Lock Scroll Lock Q Turn the buzzer ON amp OFF Default the buzzer is ON Scroll Lock Scroll Lock S Activate auto scan mode for remote amp local port The scan time interval is 5 seconds Scroll Lock Scroll Lock A Auto adjust the video signal UM CV 751 SKVM Q113V1 P 18 www rackmountsales com 4 5 DC Power 12V 24V 48V Input Input rating Input voltage Input range Input current No load Full load Output rating Output voltage Output current Efficiency Remarks 12 Volt 9 18V 50 mA 4950 mA 12 Volt 4 16A 84 m Package does not include power cord UM CV 751 SKVM Q113V1 P 19 Combo 24 Volt 18 36V 50 mA 2450 mA 12 Volt 4 16A 85 DB 15 KVM Usage 48 Volt 36 75V 50 mA 1220 mA 12 Volt 4 16A 85 www rackmountsales com The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication UM CV 751 SKVM Q113V1 www rackmountsales com
12. hat others won t trip or fall over it MB If you are using a power cord that didn t ship with the equipment ensure that it is rated for the voltage and current labeled on the equipment s electrical ratings label The voltage rating on the cord should be higher than the one listed on the equipment s ratings label m Observe all precautions and warnings attached to the equipment BM If you don t intend on using the equipment for a long time disconnect it from the power outlet to prevent being damaged by transient over voltage E Keep all liquids away from the equipment to minimize the risk of accidental spillage Liquid spilled on to the power supply or on other hardware may cause damage fire or electrical shock m Only qualified service personnel should open the chassis Opening it yourself could damage the equipment and invalidate its warranty If any part of the equipment becomes damaged or stops functioning have it checked by qualified service personnel What the warranty does not cover BM Any product on which the serial number has been defaced modified or removed E Damage deterioration or malfunction resulting from O Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification or failure to follow instructions supplied with the product Repair or attempted repair by anyone not authorized by us Any damage of the product due to shipment Removal or installation of the product
13. user manual from the link http rackmountsales com v pdf citumipkvm pdf UM CV 751 SKVM Q113V1 P 3 www rackmountsales com lt 1 5 gt KVM Cascade Combo DB 15 IP KVM M Cascade up to 8 levels 128 servers Mi Cascading multiple KVM with CBC 6 cascade cable A Cascaded KVMs from level 2 to 8 must be the models of KVM S8 KVM S16 When multiple combo DB 15 KVMs cascade together the master KVM at level 1 will take all control of other slave KVM switches e g level 2 to 8 Master KVM Cascade d To console VGA port Slave KVM gt em level 2 Slave KVM level 3 Slave KVM E level 4 Slave KVM level 5 Ey J 3 p es Es Slave KVM a 3 KVM S16 level 6 E Dp CEE AEE ED Ce KVM S16 Slave KVM level 7 EB ep Slave KVM level 8 Cascade Cat5 USB E 6ft Combo KVM cascade cable UM CV 751 SKVM Q113V1 P 4 www rackmountsales com lt 1 6 gt Specifications Combo DB 15 IP KVM KVM IP8 KVM IP16 m KVM Port Number of ports 8
Download Pdf Manuals
Related Search