Product Manual
Contents
1. 14 Wall Mounting E S ens 14 Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Safet 1 Read these instructions All the safety and operating instructions should be read before this product is operated 2 Keep these instructions The safety and operating instructions should be retained for future reference 3 Heedall warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow all instructions All operating and use instructions should be followed 5 Donotusethis apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like Clean only wit2. Attach the wall brackets to the main unit with 1 Remove the screws from the main unit the screws removed from the main unit Drill 2 parallel holes 6 3 8 mm each according Firmly fix 1 dowel into each hole in the wall to wall type in the wall The distance between if necessary the holes should be 720 mm Solid wall i e Solid brick Solid concrete Solid wood I Solid wooden battens Drywall Plaster wall Lath wall etc Leave a 5 mm gap between the wall and the screw s head Lift the unit with the attached wall brackets over the heads of the screws and slot into place 14 TEAC In the event of a product failure within the warranty period please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday 8 30AM to 5PM AEST Please have your purchase receipt and the product s serial number ready For other enquiries and support please email support teac com au
3. TEAC SB303 Soundbar With Wireless Subwoofer USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ Trademark of TEAC Corporation JAPAN www teac com au TEAC warranty PROCEDURE V1 1 Mar 2014 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Name Address Postcode ame No Serial No Name Address Postcode Thank you for selecting a TEAC product If your TEAC product malfunctions please call us directly for warranty support between Monday to Friday at 8 30AM 6PM AEST at the TEAC Warranty Service Hotline 1300 553 315 For other enquiries please contact us at support teac com au www teac com au When calling to receive warranty service please have 1 Your model and serial number 2 Proof of purchase 3 And your product in front of you NOTE You are required to provide a copy of your proof of purchase in order to have your claim processed You can c
4. In MP3 LINK mode Light flash OPTICAL Sound output available Light turn on Sound output unavailable Light flash BLUETOOTH Bluetooth playing mode Light turn on Bluetooth paring mode Light flash e MOVIE MUSIC In MOVIE mode Light turn on In MUSIC mode Light flash In DEFAULT mode Light turn off 4 W NFC Near Field Communication sensor 5 MP3LINK Socket Connect to an external audio device 6 b SOURCE Press this button to turn ON or press and hold to Standby mode Select the play function 7 VOL VOL Increase decrease the volume level 8 OPTICAL Socket Connect to an external audio device 9 AUX L R Socket Connect to an external audio device 10 AC Power Cord Front View o 02004 050504 o o 00000 009000 300000000000000000 9 000000000000000009 200000000000000000 POWER 0000000000000000 0A 300000000 000000000 9 000000000000000000 AUX MP3 LINK 300000000000000000 0900000000009009000 e 300000000000000000 000000090000000000 OPTICAL 3L 300000000000000000 990000090000099000 300000000 000000000 9 300000000000000000 000000000000000000 BLUETOOTH 300000000900000000 090000000000099000 9 MOVIE MUSIC 300000000000000000 000000000000000000 3 Oo xs PE Rear View OPTICAL e e Wireless Subwoofer 1 PAIR Indicator Light Pair in
5. to the mains socket the unit will be in STANDBY mode Press b to switch the unit ON Press 1 again to switch the unit back to STANDBY mode The POWER indicator will light up red Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely Select Modes Press the SOURCE button repeatedly on the unit or on the remote control to switch between AUX MP3 LINK OPTICAL and BLUETOOTH modes 10 Adjust the Volume Press the VOL button on the unit or on the remote control to adjust the volume Ifyou wish to turn the sound off press the MUTE button on the remote control Press the MUTE again or press the VOL button to resume normal listening Select a Preset Sound Effect While playing press the EQ button on the remote control to select between preset equalisers Movie recommended for viewing movies Music recommended for listening to music and default setting EO mode off Aux Mp3 Link Optical Operation Ensure that the unit is connected to the TV or audio device No While in ON mode press the SOURCE button repeatedly on the unit or on the remote control to select AUX or MP3 LINK or OPTICAL Mode Operate your audio device directly for playback features Press the VOL button to adjust the volume to your desired level Play with Bluetooth Device You can listen to tracks from a media device if connected to the unit via Bluetooth A w Pair Bluetooth ena
6. R button on the remote control to re activate the pairing mode the connection will be interrupted If no other Bluetooth device pairs with this player within two minutes the player will recover its previous connection The player will also be disconnected when your device is moved beyond the operational range Ifyou want to reconnect your device to this player place it within the operational range Ifthe device is moved beyond the operational range when it is brought back please check if the device is still connected to the player Ifthe connection is lost follow the instructions above to pair your device to the player again NFC Near Field Communication Operation Pair your NFC enabled mobile device directly with this unit by just a single tap 1 Activate NFC on your mobile device 2 Tap the mobile device on the fy icon of the unit 3 Operate your mobile device directly for playback features 4 disconnect tap the mobile device on the icon of the unit to disconnect or disable NFC from your mobile device Note This NFC function only works with mobile devices that support NFC technology Tips Some NFC enabled mobile devices cannot pair directly with the unit via NFC please try either one of the solutions below Please download the App Tap and Pair from Google Play Store https play Google com and install e Pair with the unit manually first then touch again on the NFC
7. bled Devices The first time you connect your bluetooth device to this player you need to pair your device to this player Note The operational range between this player and a Bluetooth device is approximately 8 meters without any object between the Bluetooth device and the unit Before you connect a Bluetooth device to this unit ensure you know the device s capabilities Compatibility with all Bluetooth devices is not guaranteed Any obstacle between this unit and a Bluetooth device can reduce the operational range If the signal strength is weak your Bluetooth receiver may disconnect but it will re enter pairing mode automatically During ON mode press the b SOURCE button on the unit or SOURCE button on the remote control repeatedly to select Bluetooth mode The Bluetooth indicator will flash slowly 2 The system has entered pairing mode OR press the BT PAIR button on the remote control to be searchable The Bluetooth indicator will flash rapidly 3 Activate your Bluetooth device and select the search mode SB303 will appear on your Bluetooth device list 4 Select SB303 in the pairing list The Bluetooth indicator will light up solidly while the pairing succeeds 5 To disconnect the Bluetooth function switch to another function on the unit or disable the function from your Bluetooth device Tips Enter 0000 for the password if necessary If there is an existing connection press the BT PAI
8. cable for change of mind Subject to the terms herein this warranty effectively covers TEAC product models released in 2014 excluding products purchased for commercial purposes as specified in the Warranty Periods Table below from the date of purchase TEAC models released before 2014 shall be covered under TEAC Warranty v1 5 2 DEC 2011 Commercial use products are covered for 12 months only Authorised Service Centre TEACPRODUST L SIZE TV WARRANTY PERIOD WARRANTY SERVICE TYPE excluding commercial use products from date of purchase Oto 12 months In home service LED LCD TV Az and above 13 to 36 months Authorised Service Centre Service Without built in Blu ray DVD player 32 to 40 36 months Authorised Service Centre Service Below 32 12 months Authorised Service Centre Service LED LCD TV 42 and above 12 months In home service With built in Blu ray DVD player 19 to 40 12 months Authorised Service Centre Service other TEAC products N A 12 months Authorised Service Centre Service Please refer to www teac com au for verification of 2014 models In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centr
9. ce call fee No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above TEAC and or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers LCD dead pixel policy please contact TEAC at support teac com au for assistance Warning Identifying the Parts Main Unit Wireless Subwoofer Remote Control Prepare the Remote Control Connections esiisa 8 Use the OPTICAL Socket 8 Use the AUX Socket 8 Use the MP3 Link Socket 9 Connect Power 9 Pairing the Wireless Subwoofer with the Main Unit 0 Basic Operation M TY 10 Standby ON Select Modes Adjust the Volume Select a Preset Sound Effect Aux Mp3 Link Optical Operation M Play with Bluetooth Device Pair Bluetooth enabled Devices NFC Near Field Communication Operation Listen to Music from Bluetooth Device Troubleshooting bes Verein esee E buses en 13 Specifications T assa es 13 Standard Accessories Sestssbetessauae
10. dicator lights up when the pairing succeeds 2 PAIR button Connect to the main unit 3 Socket Connect to power m Wi come o Remote Control 1 b Switch the unit between ON and STANDBY mode 3 VOL VOL 2 SOURCE TO Gone Switches the modes VOL Adjust the volume c iB C m le 4 laari 6 In Bluetooth mode skip to previous next audio file ung 5 rll BT In Bluetooth mode start or pause H pair s playback 6 BTPAIR Activate the pairing function in BLUETOOTH mode and disconnect the existing paired Bluetooth device 7 MUTE Mute or resume the sound 8 EQ Select a preset sound effect Preparations Prepare the Remote Control The provided Remote Control allows the unit to be operated from a distance Even if the Remote Control is operated within the effective range 6m remote control operation may be impossible if there are any obstacles between the unit and the remote control If the Remote Control is operated near other products which generate infrared rays or if other remote control devices using infra red rays are used near the unit it may operate incorrectly Conversely the other products may operate incorrectly 7 First time use The unit has a pre installed lithium CR2025 battery Remove the protective tab to activate the remote control battery 9 Replace the Remote Control Battery y 1 Pull out the battery tra
11. e If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Authorised Service Centre Service The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request A 12 month replacement warranty is applicable to all Accessories such as Remotes Power Adapters and Cables TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features and specifications Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly e
12. e will affect the life of the laser head Should any solid object or liquid fall into the system unplug the system and have it checked by qualified personnel before operating it any further Do not attempt to clean the unit with chemical solvents as this might damage the finish Use a clean dry or slightly damp cloth When removing the power plug from the wall outlet always pull directly on the plug never yank on the cord No naked flame sources such as lighted candles should be placed on the apparatus Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user s authority to operate the equipment The marking label is pasted on the bottom of the equipment Warning DO NOT INGEST BATTERY CHEMICAL BURN HAZARD The remote control supplied with this product contains a coin button cell battery If the coin button cell battery is swallowed it can cause sever internal burns in just 2 hours and lead to death Keep new and used batteries away from children If the battery compartment does not close securely stop using the product and keep it away from children If you think batteries might have been swallowed or placed inside any part of the body seek immediate medical attention Identifying the Parts Main Unit 1 Speakers Remote Control Sensor 3 LED Indicators POWER In STANDBY mode Light up red AUX MP3 LINK In AUX mode Light turn on
13. h a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Donotinstall near any heat sources such as radiators heaters stoves or other apparatus including amplifiers that produce heat 9 Donotoverride the safety purpose of the polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet ask an electrician to replace the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and at the point where they exit from the apparatus 1 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket iM ortable specified by the manufacturer or sold with Xa the apparatus Whena cart or rack is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug the apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the unit has been exposed to rain or
14. heck whether your product is entitled to a 3 year warranty on www teac com au Please read the Terms and Conditions for details of your warranty entitlement 12 8 19 16 TEAC terms ann eats Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to 2014 TEAC products purchased NEW from a TEAC Authorised Retailer in Australia This warranty only applies to the original purchaser and cannot be transferred The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not appli
15. moisture does not operate normally or has been dropped 15 O This equipment is a Class Il or double insulated electrical appliance It has been designed in such a way that it does not require a safety connection to electrical earth Caution Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus must not be exposed to dripping or splashing and objects filled with liquids such as vases must not be placed on apparatus The mains plug appliance coupler is used as the disconnect device the disconnect device must remain readily operable The battery battery or batteries or battery pack must not be exposed to excessive heat such as sunshine fire or the like Before operating this system check the voltage of this system to see if it is identical to the voltage of your local power supply The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc Make sure there is at least 20 cm of space above and at least 5cm of space on each side of the unit Do not place this unit close to strong magnetic fields Do not place the unit on the amplifier or receiver Do not place this unit close to damp areas as the moistur
16. ncouraged to back up all important information data before sending the product in for service repair Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if The product was not transported installed operated or maintained according to manufacturer instruction or The product was abused damaged tampered altered or repaired by any unauthorised persons or Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects or creatures into the product cockroach infestations or The customer is unable to provide proof of purchase of the product for verification or The serial number of the product is missing or has been tampered with Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the customer or where a fault is determined to be outside of the terms and conditions of the Warranty during an In Home Service call the customer shall be charged for the cost of the repair and or the In Home servi
17. of the subwoofer except for manual pairing Ifthe automatic pairing fails pair the subwoofer with the main unit manually Manual pairing 1 Ensure that all the cables are well connected and the main unit is in Standby mode 2 Press and hold the Pair button on the rear of the subwoofer for a few seconds The subwoofer will enter the pairing mode and the Pair Indicator will blink quickly 3 Press the D SOURCE button on the main unit or the 1 button on the remote control to switch the main unit on 4 After the wireless connection succeeded the Pair Indicator will light up 5 If the Pair indicator blinks the wireless connection has failed Unplug the cable of the subwoofer and then reconnect the main cable after 3 minutes Repeat step 1 4 NOTE Ifthe wireless connection fails again check if there is conflict or strong interference for example interference from an electronic device around your location Remove these conflicts or strong interferences and repeat the above procedures The subwoofer should be within 6m of the soundbar IfaTV oran external device is connected the main unit and the subwoofer will switch on automatically when the TV or the external device is switched on Ifthe main unit is not connected with the subwoofer and it is in On mode the POWER Indicator will flash Follow step 1 4 above to pair the subwoofer to the main unit Basic Operation Standby ON When you first connect the unit
18. s unit on my Bluetooth device for Bluetooth pairing Ensure the Bluetooth function is activated on your Bluetooth device Ensure you have paired the unit with your Bluetooth device General Power requirements teris Main unit power consumption Subwoofer power consumption OUtpUt POWER Total harmonie 5 6 Audio input sensitivity Frequency response Main unit Wet e hesdscasussemassosascantesatoaae 806 x 62 x 60 mm Subwoof Wc He Dus Hoi Certi os doe qoe e 240 x 315 x 240 mm Speakers Total impedaliCes reete 80X2440 Remote Control DiStaNM COs 6m 30 13 Standard Accessories Remote Gonttoll x1 HAS x1 PRGA audio ETE x1 3 5mm RCA audio cable 3 5mrm HR reet x1 Subwoofer AC pOWeTICOTQ tenons iiri A a o I DER x1 VUES x2 e Design and specifications are subject to change without notice Wall Mounting
19. sensing area Listen to Music from Bluetooth Device Ifthe connected Bluetooth device supports Advanced Audio Distribution Profile A2DP you can listen to the music stored on the device through the player Ifthe device also supports Audio Video Remote Control Profile AVRCP you can use the player s remote control to play music stored on the device 1 Pair your device with the player 2 Play music via your device if it supports A2DP 3 Use supplied remote control to control play if it supports AVRCP To pause resume play press the 5 11 button To skip to a track press the I 1 buttons 12 Troubleshooting To keep the warranty valid never try to repair the system yourself If you encounter problems when using this unit check the following points before requesting service No power Ensure that the AC cord of the apparatus is properly connected Ensure that there is power at the AC outlet Press standby button to turn the unit on Remote control does not work Before you press any SOURCE button first select the correct source Reduce the distance between the remote control and the unit Insert the battery with its polarities aligned as indicated Replace the battery Aim the remote control directly at the sensor on the front of the unit No response from the unit Disconnect and reconnect the AC power plug then turn the unit on again I can t find the Bluetooth name of thi
20. udio output sockets to the AUX R L socket on the unit p Use a 3 5mm to RCA audio cable included to connect the TV s headphone socket to the AUX R L socket on the unit Use the MP3 Link Socket Use a 3 5mm to 3 5mm audio cable included to connect the external audio device headphone socket to the MP3 LINK socket on the unit 3 5mm to 3 5mm audio cable Phone Media player Connect Power Risk of product damage Main Unit Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit Before connecting the AC power cord ensure you have completed all other connections Connect the mains plug of the main unit to a mains socket Wireless Subwoofer Connect the mains cable to the Socket of the subwoofer and then into a mains socket D oo a 5 Ensure all connections are connected before connecting to the mains power socket Pairing the Wireless Subwoofer with the Main Unit Automatic pairing The subwoofer and soundbar will automatically pair when both units are plugged into the mains sockets and turned on No cable is needed for connecting the two units When the subwoofer is pairing with the main unit the Pair Indicator will flash When the subwoofer is paired with the main unit the Pair Indicator will light up NOTE Do not press the Pair button on the rear
21. y and remove the old battery 2 Place a new CR2025 battery into the battery tray with correct polarity as indicated 3 Insert the battery tray back into the slot CA Precautions Concerning Batteries EM When the Remote Control is not to be used 9 for a long time more than a month remove the battery from the Remote Control to prevent it from leaking If the batteries leak wipe away the leakage inside the battery compartment and replace the batteries with new ones Do not use any batteries other than those specified Do not heat or disassemble batteries Never throw them in fire or water not carry or store batteries with other metallic objects Doing so could cause batteries to short circuit leak or explode Never recharge a battery unless it is confirmed to be a rechargeable type Connections Use the OPTICAL Socket Remove the protective cap of the OPTICAL socket then connect an OPTICAL cable not included to the TV s OPTICAL OUT socket and the OPTICAL socket on the unit OPTICAL cable x TV Tip If there is no sound come out of the soundbar and the indicator light flash fast Make sure the audio setting of your source player e g DVD player game player TV is setted to PCM with optical input Use the AUX Socket RCA stereo audio cable TV Use a RCA stereo audio cable included to connect the TV s a
Download Pdf Manuals
Related Search